Synergy of oxygen reduction for H2O2 production and electro-fenton induced by atomic hydrogen over a bifunctional cathode towards water purification.

In the Electro-Fenton (EF) process, hydrogen peroxide (H2O2) is produced in situ by a two-electron oxygen reduction reaction (2e ORR), which is further activated by electrocatalysts to generate reactive oxygen specieces (ROS). However, the selectivity of 2e transfer from catalysts to O2 is still unsatisfactory, resulting in the insufficient H2O2 availability. Carbon based materials with abundant oxygen-containing functional groups have been used as excellent 2e ORR electrocatalysts, and atomic hydrogen (H*) can quickly transfer one electron to H2O2 in a wide pH range and avoiding the restrict of traditional Fenton reaction. Herein, nickel nanoparticles growth on oxidized carbon deposited on modified carbon felt (Ni/Co@CFAO) was prepared as a bifunctional catalytic electrode coupling 2e ORR to form H2O2 with H* reducing H2O2 to produce ROS for highly efficient degradation of antibiotics. Electrochemical oxidation and thermal treatment were used to modulate the structure of carbon substrates for increasing the electro-generation of H2O2, while H* was produced over Ni sites through H2O/H+ reduction constructing an in-situ EF system. The experimental results indicated that 2e ORR and H* induced EF processes could promote each other mutually. The optimized Ni/Co@CFAO with a Ni:C mass ratio of 1:9 exhibited a high 2e selectivity and H2O2 yield of 49 mg L-1. As a result, the designed Ni/Co@CFAO exhibited excellent electrocatalytic ability to degrade tetracycline (TC) under different aqueous environmental conditions, and achieved 98.5% TC removal efficiency within 60 min H2O2 and H* were generated simultaneously at the bifunctional cathode and react to form strong oxidizing free radicals •OH. At the same time, O2 gained an electron to form •O2-, which could react with •OH and H2O to form 1O2, which had relatively long life (10-6∼10-3 s), further promoting the efficient removal of antibiotics in water.

Utilizing an Integrated Flow Cathode-Membrane Filtration System for Effective and Continuous Electrochemical Hydrodechlorination.

Pd-based electrodes are recognized to facilitate effective electrochemical hydrodechlorination (EHDC) as a result of their superior capacity for atomic hydrogen (H*) generation. However, challenges such as electrode stability, feasibility of treating complex matrices, and high cost associated with electrode synthesis hinder the application of Pd-based electrodes for EHDC. In this work, we investigated the feasibility of degrading 2,4-dichlorophenol (2,4-DCP) by EHDC employing Pd-loaded activated carbon particles, prepared via a simple wet-impregnation method, as a flow cathode (FC) suspension. Compared to other Pd-based EHDC studies, a much lower Pd loading (0.02-0.08 mg cm-2) was used. Because of the excellent mass transfer in the FC system, almost 100% 2,4-DCP was hydrodechlorinated to phenol within 1 h. The FC system also showed excellent performance in treating complex water matrices (including hardness ion-containing wastewater and various other chlorinated organics such as 2,4-dichlorobenzoic acid and trichloroacetic acid) with a relatively low energy consumption (0.26-1.56 kW h m-3 mg-1 of 2,4-DCP compared to 0.32-7.61 kW h m-3 mg-1 of 2,4-DCP reported by other studies). The FC synthesized here was stable over 36 h of continuous operation, indicating its potential suitability for real-world applications. Employing experimental investigations and mathematical modeling, we further show that hydrodechlorination of 2,4-DCP occurs via interaction with H*, with no role of direct electron transfer and/or HO•-mediated processes in the removal of 2,4-DCP.

H*ads dynamics engineering via bimetallic Pd-Cu@MXene catalyst for enhanced electrocatalytic hydrodechlorination.

Electrocatalytic hydrodechlorination (EHDC) is a promising approach to safely remove halogenated emerging contaminants (HECs) pollutants. However, sluggish production dynamics of adsorbed atomic H (H*ads) limit the applicability of this green process. In this study, bimetallic Pd-Cu@MXene catalysts were synthesized to achieve highly efficient removal of HECs. The alloy electrode (Pd-Cu@MX/CC) exhibited better EHDC performance in comparison to Pd@MX/CC electrode, resulting in diclofenac degradation efficiency of 93.3 ± 0.1%. The characterization analysis revealed that the Pd0/PdII ratio decreased by forming bimetallic Pd-Cu alloy. Density functional theory calculations further demonstrated the electronic configuration modulation of the Pd-Cu@MXene catalysts, optimizing binging energies for H* and thereby facilitating H*ads production and tuning the reduction capability of H*ads. Noteably, the amounts and reduction potential of H*ads for Pd-Cu@MXene catalysts were 1.5 times higher and 0.37 eV lower than those observed for the mono Pd electrode. Hence, the introduction of Cu into the Pd catalyst optimized the dynamics of H*ads production, thereby conferring significant advantages to EHDC reactions. This augmentation was underscored by the successful application of the alloy catalysts supported by MXene in EHDC experiments involving other HECs, which represented a new paradigm for EHDC for efficient recalcitrant pollutant removal by H*ads.

Nano Pd doped Ni foam electrode stimulated electrochemical reduction of tetrabromobisphenol A: Optimization strategies and function mechanism.

Tetrabromobisphenol A (TBBPA), a hazardous and persistent flame retardant, has been widely detected in the natural aquatic system. The acceleration of reductive debromination (rate-limiting process) is vital during the decomposition and detoxification of TBBPA. This study achieved superior TBBPA electrochemical reductive debromination performance by nano Pd doped Ni foam electrode (4.8 times higher than Ni foam electrode). The optimal TBBPA reductive debromination performance was obtained under -1.2 V of cathode potential, 1.2 wt% of Pd loading, 10 mg L-1 of TBBPA and 100 mM of Na2SO4 as the electrolyte solution. UPLC-QTOF-MS verified that Br atoms in TBBPA were removed sequentially to form bisphenol A as the major product. Most TBBPA was reductively debrominated by atomic H* through indirect hydrodebromination, evidenced by the atomic H* quenching test. The higher solution conductivity and appropriate TBBPA concentration would contribute to the debromination efficiency. Excessive H2 generation whether by over negative potential or H atom richness electrolyte largely disturbed the reaction process and restricted the debromination. The improved generation of reductant (H*)adsPd was the most significant, while excessive Pd loading would make aggregation and limit the debromination efficiency. The study confirmed the optimization strategies of conditions for Pd/Ni foam electrode and revealed the related function mechanism for stimulating TBBPA electrochemical reduction, giving suggestions for the efficient removal of TBBPA in the aquatic environment.

New insight into degradation of chloramphenicol using a nanoporous Pd/Co3O4cathode: characterization and pathways analysis.

The growing chloramphenicol (CAP) in wastewater brought a serious threat to the activity of activated sludge and the spread of antibiotics resistance bacteria. In this study, a highly ordered nanoporous Co3O4layer on Co foil through anodization was prepared as cathode for nitro-group reduction and electrodeposited with Pd particles for dechlorination to reduce CAP completely. After 3 h treatment, almost 100% of CAP was reduced. Co2+ions in Co3O4served as catalytic sites for electrons transfer to CAP through a redox circle Co2+-Co3+-Co2+, which triggered nitro-group reduction at first. With the presence of Pd particles, more atomic H* were generated for dechlorination, which increased 22% of reduction efficiency after 3 h treatment. Therefore, a better capacity was achieved by Pd/Co3O4cathode (K = 0.0245 min-1,Kis reaction constant) than by other cathodes such as Fe/Co3O4(K = 0.0182 min-1), Cu/Co3O4(K = 0.0164 min-1), and pure Co3O4(K = 0.0106 min-1). From the proposed reaction pathway, the ultimate product was carbonyl-reduced AM (dechlorinated aromatic amine product of CAP) without antibacterial activity, which demonstrated this cathodic technology was a feasible way for wastewater pre-treatment.

Synergistic Effect of Co(III) and Co(II) in a 3D Structured Co3O4/Carbon Felt Electrode for Enhanced Electrochemical Nitrate Reduction Reaction.

As nitrate contamination causes serious environmental problems, it is necessary to develop stable and efficient electrocatalysts for efficient electrochemical nitrate reduction reaction (ENRR). Here, a nonprecious Co3O4/carbon felt (CF) electrode with a 3D structure was prepared by integrating electrodeposition with calcination methods. This 3D structured Co3O4/CF electrode exhibits a high-rate constant of 1.18 × 10-4 s-1 cm-2 for the ENRR, surpassing other Co3O4 electrodes in previous literature. Moreover, it also has an excellent stability with a decrease of 6.4% after 10 cycles. Density functional theory calculations, electron spin resonance analysis, and cyclic voltammetry were performed to study the mechanism of the ENRR on the Co3O4/CF electrode, proving that atomic H* (indirect pathway) plays a prominent role in NO3- reduction and clarifying the synergistic effect of Co(III) and Co(II) in the Co(II)-Co(III)-Co(II) redox cycle for the ENRR: Co(III) prefers the adsorption of NO3- and Co(II) favors the production of H*. Based on this synergy, a relatively large amounts of Co(II) on the surface of the Co3O4/CF electrode (1.3 Co(II)/Co(III) ratio) was maintained by controlling the temperature of calcination to 200 °C with a lower energy barrier of H* formation of 0.46 eV than other ratios, which is beneficial for forming H* and enhancing the performance of the ENRR. Thus, this study suggests that building 3D structure and optimizing Co(II)/Co(III) ratio are important for designing efficient Co3O4 electrocatalyst for ENRR.

Selective Electrocatalytic Reduction of Nitrate to Ammonia with Nickel Phosphide.

Liquid ammonia is considered a sustainable liquid fuel and an easily transportable carrier of hydrogen energy; however, its synthesis processes are energy-consuming, high cost, and low yield rate. Herein, we report the electrocatalytic reduction of nitrate (NO3-) (ERN) to ammonia (NH3) with nickel phosphide (Ni2P) used as a noble metal-free cathode. Ni2P with (111) facet was grown in situ on nickel foam (NFP), which was regarded as a self-supporting cathode for ERN to synthesis NH3 with high yield rate (0.056 mmol h-1 mg-1) and superior faradaic efficiency of 99.23%. The derived atomic H (*H), verified by a quenching experiment and an electron spin resonance (ESR) technique, effectively enhanced the high selectivity for NH3 generation. DFT calculations indicated that *NO3 was deoxygenated to *NO2 and *NO, and *NO was subsequently hydrogenated with *H to generate NH3 with an energy releasing process (ΔG < 0). OLEMS also proved that NO was the merely gas intermediate. NFP exhibited the unique superhydrophilic surface, metallic properties, low impedance, and abundant surface sites, favorable for adsorption of NO3-, generation of *H, and then hydrogenation of NO3-. Hence, NFP cathode showed high selectivity for NH3 (89.1%) in ERN. NFP with long-term stability and low energy consumption provides a facile strategy for synthesis of NH3 and elimination of NO3- contamination.

Amorphous nickel phosphide as a noble metal-free cathode for electrochemical dechlorination.

Nickel phosphide (Ni2P) is an emerging efficient catalyst for the hydrogen evolution and water splitting. Herein, we report that Ni2P is also a promising catalyst for enhancing electrochemical dechlorination of chlorinated disinfection byproducts (DBPs). Amorphous Ni2P (ANP) mini-nanorod arrays were in-situ fabricated on nickel foam (NF) via a facile phosphidation process, and then used as a binder-free cathode for electrochemical dechlorination of trichloroacetic acid (TCAA). Results showed that ANP exhibited superior performance on electrochemical dechlorination of TCAA than other metal cathodes (e.g., NF and Pd/C). Scavenging experiments and electron spin resonance (ESR) technique indicated that atomic H* was generated from water reduction through ANP catalysis, and primarily contributed to TCAA dechlorination. Indeed, the superhydrophilic surface of ANP favored electrocatalyst/electrolyte contact, and its low impedance further afforded rapid electron transport from the electrode to water or protons for atomic H* generation. The kinetic modelling and mass balance evaluation revealed the transformation mechanism of TCAA dechlorination. This study is among the first to develop ANP as a binder-free cathode for electrochemical dechlorination, and have important implications for eliminating chlorinated DBPs in water.

Electrocatalytic dechlorination of halogenated antibiotics via synergistic effect of chlorine-cobalt bond and atomic H.

Although noble metal electrocatalysts are highly efficient in the dehalogenation of halogenated antibiotics, the prohibitive cost hinders their practical applications. In this study, a cobalt-phosphorous/oxide (CoP/O) composite prepared via a one-step electrodeposition was for the first time applied in electroreductive dechlorination of halogenated antibiotics (HA), including chloramphenicol (CAP), florfenicol (FLO) and thiamphenicol (TAP). CoP/O had a higher FLO dechlorination efficiency (91%) than Pd/C (69.3%) (t = 60 min, C0 = 20 mg L-1, applied voltage of -1.2 V vs. saturated calomel electrode (SCE)). Furthermore, the dechlorination efficiencies of CoP/O for CAP and TAP reached to 98.7 and 74.2%, respectively. The electron spin resonance and in situ Raman characterizations confirmed that atomic H* was produced via the CoP and the formation of CoCl bonds occurred on the CoO in CoP/O. The CoCl bond formation could trap HA molecules onto CoP/O and weaken the CCl bond strength. The synergistic effect of H* attack and CoCl bond was responsible for the high dechlorination efficiency. This study offers new insights into the interface mechanism of electroreductive dehalogenation process, and shows a great potential for the remediation of halogenated antibiotics contaminated wastewater.

Atomic H-Induced Mo2C Hybrid as an Active and Stable Bifunctional Electrocatalyst.

Mo2C nanocrystals (NCs) anchored on vertically aligned graphene nanoribbons (VA-GNR) as hybrid nanoelectrocatalysts (Mo2C-GNR) are synthesized through the direct carbonization of metallic Mo with atomic H treatment. The growth mechanism of Mo2C NCs with atomic H treatment is discussed. The Mo2C-GNR hybrid exhibits highly active and durable electrocatalytic performance for the hydrogen-evolution reaction (HER) and oxygen-reduction reaction (ORR). For HER, in an acidic solution the Mo2C-GNR has an onset potential of 39 mV and a Tafel slope of 65 mV dec-1, and in a basic solution Mo2C-GNR has an onset potential of 53 mV, and Tafel slope of 54 mV dec-1. It is stable in both acidic and basic media. Mo2C-GNR is a high-activity ORR catalyst with a high peak current density of 2.01 mA cm-2, an onset potential of 0.93 V that is more positive vs reversible hydrogen electrode (RHE), a high electron transfer number n (∼3.90), and long-term stability.