Hypoxia as a stimulus for tissue formation: The concept of organogenesis in microsurgically vascularized tissue engineering constructs.

Axial vascularization of tissue constructs is essential to maintain an adequate blood supply for a stable regeneration of a clinically relevant tissue size. The versatility of the arterio-venous loop (AVL) has been previously shown in various small and large animal models as well as in clinical reports for bone regeneration. We have previously demonstrated the capability of the AVL to induce axial vascularization and to support the nourishment of tissue constructs in small animal models after applying high doses of ionizing radiation comparable to those applied for adjuvant radiotherapy after head and neck cancer. We hypothesize that this robust ability to induce regeneration after irradiation could be related to a state of hypoxia inside the constructs that triggers the HIF1 (hypoxia induced factor 1) - SDF1 (stromal derived factor 1) axis leading to chemotaxis of progenitor cells and induction of tissue regeneration and vascularization. We analyzed the expression of HIF1 and SDF1 via immunofluorescence in axially vascularized bone tissue engineering constructs in Lewis rats 2 and 5 weeks after local irradiation with 9Gy or 15Gy. We also analyzed the expression of various genes for osteogenic differentiation (collagen 1, RUNX, alkaline phosphatase and osteonectin) via real time PCR analysis. The expression of HIF1 and SDF1 was enhanced two weeks after irradiation with 15Gy in comparison to non-irradiated constructs. The expression of osteogenic markers was enhanced at the 5-weeks time point with significant results regarding collagen, alkaline phosphatase and osteonectin. These results indicate that the hypoxia within the AVL constructs together with an enhanced SDF1 expression probably play a role in promoting tissue differentiation. The process of tissue generation triggered by hypoxia in the vicinity of a definite vascular axis with enhanced tissue differentiation over time resembles hereby the well-known concept of organogenesis in fetal life.

Development of Neovasculature in Axially Vascularized Calcium Phosphate Cement Scaffolds.

Augmenting the vascular supply to generate new tissues, a crucial aspect in regenerative medicine, has been challenging. Recently, our group showed that calcium phosphate can induce the formation of a functional neo-angiosome without the need for microsurgical arterial anastomosis. This was a preclinical proof of concept for biomaterial-induced luminal sprouting of large-diameter vessels. In this study, we investigated if sprouting was a general response to surgical injury or placement of an inorganic construct around the vessel. Cylindrical biocement scaffolds of differing chemistries were placed around the femoral vein. A contrast agent was used to visualize vessel ingrowth into the scaffolds. Cell populations in the scaffold were mapped using immunohistochemistry. Calcium phosphate scaffolds induced 2.7-3 times greater volume of blood vessels than calcium sulphate or magnesium phosphate scaffolds. Macrophage and vSMC populations were identified that changed spatially and temporally within the scaffold during implantation. NLRP3 inflammasome activation peaked at weeks 2 and 4 and then declined; however, IL-1ß expression was sustained over the course of the experiment. IL-8, a promoter of angiogenesis, was also detected, and together, these responses suggest a role of sterile inflammation. Unexpectedly, the effect was distinct from an injury response as a result of surgical placement and also was not simply a foreign body reaction as a result of placing a rigid bioceramic next to a vein, since, while the materials tested had similar microstructures, only the calcium phosphates tested elicited an angiogenic response. This finding then reveals a potential path towards a new strategy for creating better pro-regenerative biomaterials.

In Vivo Bone Tissue Engineering Strategies: Advances and Prospects.

Reconstruction of critical-sized bone defects remains a tremendous challenge for surgeons worldwide. Despite the variety of surgical techniques, current clinical strategies for bone defect repair demonstrate significant limitations and drawbacks, including donor-site morbidity, poor anatomical match, insufficient bone volume, bone graft resorption, and rejection. Bone tissue engineering (BTE) has emerged as a novel approach to guided bone tissue regeneration. BTE focuses on in vitro manipulations with seed cells, growth factors and bioactive scaffolds using bioreactors. The successful clinical translation of BTE requires overcoming a number of significant challenges. Currently, insufficient vascularization is the critical limitation for viability of the bone tissue-engineered construct. Furthermore, efficacy and safety of the scaffolds cell-seeding and exogenous growth factors administration are still controversial. The in vivo bioreactor principle (IVB) is an exceptionally promising concept for the in vivo bone tissue regeneration in a predictable patient-specific manner. This concept is based on the self-regenerative capacity of the human body, and combines flap prefabrication and axial vascularization strategies. Multiple experimental studies on in vivo BTE strategies presented in this review demonstrate the efficacy of this approach. Routine clinical application of the in vivo bioreactor principle is the future direction of BTE; however, it requires further investigation for overcoming some significant limitations.

Bone Regeneration Exploiting Corticoperiosteal Tissue Transfer for Scaffold-Guided Bone Regeneration.

Contemporary reconstructive approaches for critical size bone defects carry significant disadvantages. As a result, clinically driven research has focused on the development and translation of alternative therapeutic concepts. Scaffold-guided tissue regeneration (SGTR) is an emerging technique to heal critical size bone defects. However, issues synchronizing scaffold vascularization with bone-specific regenerative processes currently limit bone regeneration for extra large (XL, 19 cm3) critical bone defects. To address this issue, we developed a large animal model that incorporates a corticoperiosteal flap (CPF) for sustained scaffold neovascularization and bone regeneration. In 10 sheep, we demonstrated the efficacy of this approach for healing medium (M, 9 cm3) size critical bone defects as demonstrated on plain radiography, microcomputed tomography, and histology. Furthermore, in two sheep, we demonstrate how this approach can be safely extended to heal XL critical size defects. This article presents an original CPF technique in a well-described preclinical model, which can be used in conjunction with the SGTR concept, to address challenging critical size bone defects in vivo. Impact statement This article describes a novel scaffold-guided tissue engineering approach utilizing a corticoperiosteal flap for bone healing in critical size long bone defects. This approach will be of use for tissue engineers and surgeons exploring vascularized tissue transfer as an option to regenerate large volumes of bone for extensive critical size bone defects both in vivo and in the clinical arena.

Decellularized Whole-Organ Pre-vascularization: A Novel Approach for Organogenesis.

Introduction: Whole-organ decellularization is an attractive approach for three-dimensional (3D) organ engineering. However, progress with this approach is hindered by intra-vascular blood coagulation that occurs after in vivo implantation of the re-cellularized scaffold, resulting in a short-term graft survival. In this study, we explored an alternative approach for 3D organ engineering through an axial pre-vascularization approach and examined its suitability for pancreatic islet transplantation. Methods: Whole livers from male Lewis rats were decellularized through sequential arterial perfusion of detergents. The decellularized liver scaffold was implanted into Lewis rats, and an arteriovenous bundle was passed through the scaffold. At the time of implantation, fresh bone marrow preparation (BM; n = 3), adipose-derived stem cells (ADSCs; n = 4), or HBSS (n = 4) was injected into the scaffold through the portal vein. After 5 weeks, around 2,600 islet equivalents (IEQs) were injected through the portal vein of the scaffold. The recipient rats were rendered diabetic by the injection of 65 mg/kg STZ intravenously 1 week before islet transplantation and were followed up after transplantation by measuring the blood glucose and body weight for 30 days. Intravenous glucose tolerance test was performed in the cured animals, and samples were collected for immunohistochemical (IHC) analyses. Micro-computed tomography (CT) images were obtained from one rat in each group for representation. Results: Two rats in the BM group and one in the ADSC group showed normalization of blood glucose levels, while one rat from each group showed partial correction of blood glucose levels. In contrast, no rats were cured in the HBSS group. Micro-CT showed evidence of sprouting from the arteriovenous bundle inside the scaffold. IHC analyses showed insulin-positive cells in all three groups. The number of von-Willebrand factor-positive cells in the islet region was higher in the BM and ADSC groups than in the HBSS group. The number of 5-bromo-2'-deoxyuridine-positive cells was significantly lower in the BM group than in the other two groups. Conclusions: Despite the limited numbers, the study showed the promising potential of the pre-vascularized whole-organ scaffold as a novel approach for islet transplantation. Both BM- and ADSCs-seeded scaffolds were superior to the acellular scaffold.

Tissue Engineering of Axially Vascularized Soft-Tissue Flaps with a Poly-(ɛ-Caprolactone) Nanofiber-Hydrogel Composite.

Objective: To develop a novel approach for tissue engineering of soft-tissue flaps suitable for free microsurgical transfer, using an injectable nanofiber hydrogel composite (NHC) vascularized by an arteriovenous (AV) loop. Approach: A rat AV loop model was used for tissue engineering of vascularized soft-tissue flaps. NHC or collagen-elastin (CE) scaffolds were implanted into isolation chambers together with an AV loop and explanted after 15 days. Saphenous veins were implanted into the scaffolds as controls. Neoangiogenesis, ultrastructure, and protein expression of SYNJ2BP, EPHA2, and FOXC1 were analyzed by immunohistochemistry and compared between the groups. Rheological properties were compared between the two scaffolds and native human adipose tissue. Results: A functional neovascularization was evident in NHC flaps with its amount being comparable with CE flaps. Scanning electron microscopy revealed a strong mononuclear cell infiltration along the nanofibers in NHC flaps and a trend toward higher fiber alignment compared with CE flaps. SYNJ2BP and EPHA2 expression in endothelial cells (ECs) was lower in NHC flaps compared with CE flaps, whereas FOXC1 expression was increased in NHC flaps. Compared with the stiffer CE flaps, the NHC flaps showed similar rheological properties to native human adipose tissue. Innovation: This is the first study to demonstrate the feasibility of tissue engineering of soft-tissue flaps with similar rheological properties as human fat, suitable for microsurgical transfer using an injectable nanofiber hydrogel composite. Conclusions: The injectable NHC scaffold is suitable for tissue engineering of axially vascularized soft-tissue flaps with a solid neovascularization, strong cellular infiltration, and biomechanical properties similar to human fat. Our data indicate that SYNJ2BP, EPHA2, and FOXC1 are involved in AV loop-associated angiogenesis and that the scaffold material has an impact on protein expression in ECs.

Material-Induced Venosome-Supported Bone Tubes.

The development of alternatives to vascular bone grafts, the current clinical standard for the surgical repair of large segmental bone defects still today represents an unmet medical need. The subcutaneous formation of transplantable bone has been successfully achieved in scaffolds axially perfused by an arteriovenous loop (AVL) and seeded with bone marrow stromal cells or loaded with inductive proteins. Although demonstrating clinical potential, AVL-based approaches involve complex microsurgical techniques and thus are not in widespread use. In this study, 3D-printed microporous bioceramics, loaded with autologous total bone marrow obtained by needle aspiration, are placed around and next to an unoperated femoral vein for 8 weeks to assess the effect of a central flow-through vein on bone formation from marrow in a subcutaneous site. A greater volume of new bone tissue is observed in scaffolds perfused by a central vein compared with the nonperfused negative control. These analyses are confirmed and supplemented by calcified and decalcified histology. This is highly significant as it indicates that transplantable vascularized bone can be grown using dispensable vein and marrow tissue only. This is the first report illustrating the capacity of an intrinsic vascularization by a single vein to support ectopic bone formation from untreated marrow.

Axially vascularized tissue-engineered bone constructs retain their in vivo angiogenic and osteogenic capacity after high-dose irradiation.

In order to introduce bone tissue engineering to the field of oncological reconstruction, we are investigating for the first time the effect of various doses of ionizing irradiation on axially vascularized bone constructs. Synthetic bone constructs were created and implanted in 32 Lewis rats. Each construct was axially vascularized through an arteriovenous loop made by direct anastomosis of the saphenous vessels. After 2 weeks, the animals received ionizing irradiation of 9 Gy, 12 Gy and 15 Gy, and were accordingly classified to groups I, II and III, respectively. Group IV was not irradiated and acted as a control. Tissue generation, vascularity, cellular proliferation and apoptosis were investigated either 2 or 5 weeks after irradiation through micro-computed tomography, histomorphometry and real-time polymerase chain reaction (PCR). At 2 weeks after irradiation, tissue generation and central vascularity were significantly lower and apoptosis was significantly higher in groups II and III than group IV, but without signs of necrosis. Cellular proliferation was significantly lower in groups I and II. After 5 weeks, the irradiated groups showed improvement in all parameters in relation to the control group, indicating a retained capacity for angiogenesis after irradiation. PCR results confirmed the expression of osteogenesis-related genes in all irradiated groups. Dense collagen was detected 5 weeks after irradiation, and one construct showed discrete islands of bone indicating a retained osteogenic capacity after irradiation. This demonstrates for the first time that axial vascularization was capable of supporting a synthetic bone construct after a high dose of irradiation that is comparable to adjuvant radiotherapy. Copyright © 2016 John Wiley & Sons, Ltd.

Haemodynamically stimulated and in vivo generated axially vascularized soft-tissue free flaps for closure of complex defects: Evaluation in a small animal model.

The arteriovenous (AV) loop model permits the creation of significant volumes of axially vascularized tissue that represents an alternative to conventional free flaps, circumventing their common limitations. However, such AV loop-based flaps have never before been examined in standardized animal models with respect to their suitability for reconstruction of critical bone-exposing defects. In the course of our preliminary studies, we implemented a novel defect model in rats that provides standardized and critical wound conditions and evaluated whether AV loop-generated flaps are suitable for free microsurgical transfer and closure of composite defects. We compared three groups of rodents with similar scapular defects: one received the AV flap, whereas controls were left to heal by secondary intention or with supplementary acellular matrix alone. To create the flaps, AV loops were placed into subcutaneous Teflon chambers filled with acellular matrix and transferred to the thigh region. Flap maturation was evaluated by histological analysis of angiogenesis and cell migration at days 14 and 28 after loop creation. Flap transfer to the scapular region and microsurgical anastomoses were performed after 14 days. Postoperative defect closure and perfusion were continually compared between groups. Within the AV flap chamber, the mean vessel number, cell count and the proportion of proliferating cells increased significantly over time. The novel defect model revealed that stable wound coverage with homogeneous vascular integration was achieved by AV loop-vascularized soft-tissue free flaps compared with controls. In summary, our study indicates for the first time that complex composite defects in rats can successfully be treated with AV loop-based free flaps.

Engineered, axially-vascularized osteogenic grafts from human adipose-derived cells to treat avascular necrosis of bone in a rat model.

BACKGROUND: Avascular necrosis of bone (AVN) leads to sclerosis and collapse of bone and joints. The standard of care, vascularized bone grafts, is limited by donor site morbidity and restricted availability. The aim of this study was to generate and test engineered, axially vascularized SVF cells-based bone substitutes in a rat model of AVN. METHODS: SVF cells were isolated from lipoaspirates and cultured onto porous hydroxyapatite scaffolds within a perfusion-based bioreactor system for 5days. The resulting constructs were inserted into devitalized bone cylinders mimicking AVN-affected bone. A ligated vascular bundle was inserted upon subcutaneous implantation of constructs in nude rats. After 1 and 8weeks in vivo, bone formation and vascularization were analyzed. RESULTS: Newly-formed bone was found in 80% of SVF-seeded scaffolds after 8weeks but not in unseeded controls. Human ALU+cells in the bone structures evidenced a direct contribution of SVF cells to bone formation. A higher density of regenerative, M2 macrophages was observed in SVF-seeded constructs. In both experimental groups, devitalized bone was revitalized by vascularized tissue after 8 weeks. CONCLUSION: SVF cells-based osteogenic constructs revitalized fully necrotic bone in a challenging AVN rat model of clinically-relevant size. SVF cells contributed to accelerated initial vascularization, to bone formation and to recruitment of pro-regenerative endogenous cells. STATEMENT OF SIGNIFICANCE: Avascular necrosis (AVN) of bone often requires surgical treatment with autologous bone grafts, which is surgically demanding and restricted by significant donor site morbidity and limited availability. This paper describes a de novo engineered axially-vascularized bone graft substitute and tests the potential to revitalize dead bone and provide efficient new bone formation in a rat model. The engineering of an osteogenic/vasculogenic construct of clinically-relevant size with stromal vascular fraction of human adipose, combined to an arteriovenous bundle is described. This construct revitalized and generated new bone tissue. This successful approach proposes a novel paradigm in the treatment of AVN, in which an engineered, vascularized osteogenic graft would be used as a germ to revitalize large volumes of necrotic bone.

The impact of various scaffold components on vascularized bone constructs.

Bone tissue engineering is gaining more interest in the field of craniofacial surgery where continuous efforts are being made to improve the outcomes via modulation of the scaffold components. In an in vitro three dimensional (3D) culture, the effect of bone morphogenic protein 2 (BMP2, 60 µg/ml) and the effect of different cell seeding densities (0.25, 0.5, and 1 × 104) of rat mesenchymal stem cells seeded on nanocrystalline hydroxyapatite in silica gel matrix (Nanobone®) on the cell viability and differentiation were studied. Alkaline phosphatase and viability assays were performed at day 7, day 14, and day 21 to assess the differentiation and the relative fraction of viable cells in the 3D cell cultures. In a subsequent in vivo study, we examined the effect of axial vascularization, the scaffold's particle size and the nature of the matrix (collagen type I vs. diluted fibrin) on vascularization and tissue generation in vascularized bone construct in rats. Regarding vascularization, we compared constructs vascularized randomly by extrinsic vascularization from the periphery of the implanted construct with others vascularized axially via an implanted arteriovenous loop (AVL). Regarding the particle size, we compared constructs having a scaffold particle size of 0.2 mm (powder) with other constructs having a particle size of 2 × 0.6 mm (granules). Regarding the matrix we compared constructs having a collagen matrix with others having a fibrin matrix. Various groups were compared regarding the amount of tissue generation, vascularization, and cellular proliferation. The initial seeding density had a temporary and minimal effect on the overall osteogenic differentiation of the cells. On the contrary, adding BMP2 in a concentration of 60 µg/ml over one week led to an overall enhanced osteogenic differentiation despite depressed cell viability. Axial vascularization was mandatory for efficient tissue formation and vascularization of the bone construct. Collagen matrix and a smaller particle size provided more favorable results in terms of vascularization and tissue formation than diluted fibrin and larger Nanobone particles.

In vivo tissue engineered bone versus autologous bone: stability and structure.

This pilot study investigated the biomechanical properties of prefabricated, vascularized bioartificial bone grafts, which may provide an alternative bone source for the restoration of segmental osseous defects. Vascularized bioartificial bone grafts comprise an artificial customized scaffold made of beta-tricalcium phosphate. Bone formation along the prefabricated scaffold is induced by autogenous cancellous bone. Vascularization of the bone graft is provided by the host's vascular system. Within 6 months, a mammalian bioreactor (sheep were used in the present study) creates heterotopic vascularized bioartificial bone grafts of a predetermined anatomical shape, which can be harvested for reconstructing osseous defects. The bioartificial bone grafts in this study contained up to 25% bone tissue, as shown by histomorphometric analysis and computed tomography. Moreover, unconfined compression tests revealed that the constructs had mechanical characteristics similar to those of ovine cancellous bone. Therefore, this method could be applied to generate vascularized prefabricated bone substitutes for critical-size defects.

The potential role of telocytes in Tissue Engineering and Regenerative Medicine.

Research and ideas for potential applications in the field of Tissue Engineering (TE) and Regenerative Medicine (RM) have been constantly increasing over recent years, basically driven by the fundamental human dream of repairing and regenerating lost tissue and organ functions. The basic idea of TE is to combine cells with putative stem cell properties with extracellular matrix components, growth factors and supporting matrices to achieve independently growing tissue. As a side effect, in the past years, more insights have been gained into cell-cell interaction and how to manipulate cell behavior. However, to date the ideal cell source has still to be found. Apart from commonly known various stem cell sources, telocytes (TC) have recently attracted increasing attention because they might play a potential role for TE and RM. It becomes increasingly evident that TC provide a regenerative potential and act in cellular communication through their network-forming telopodes. While TE in vitro experiments can be the first step, the key for elucidating their regenerative role will be the investigation of the interaction of TC with the surrounding tissue. For later clinical applications further steps have to include an upscaling process of vascularization of engineered tissue. Arteriovenous loop models to vascularize such constructs provide an ideal platform for preclinical testing of future therapeutic concepts in RM. The following review article should give an overview of what is known so far about the potential role of TC in TE and RM.

Axially vascularised mandibular constructs: Is it time for a clinical trial?

Applying regenerative therapies in the field of cranio-maxillofacial reconstruction has now become a daily practice. However, regeneration of challenging or irradiated bone defects following head and neck cancer is still far beyond clinical application. As the key factor for sound regeneration is the development of an adequate vascular supply for the construct, the current modalities using extrinsic vascularization are incapable of regenerating such complex defects. Our group has recently introduced the intrinsic axial vascularization technique to regenerate mandibular defects using the arteriovenous loop (AVL). The technique has shown promising results in terms of efficient vascularization and bone regeneration at the preclinical level. In this article, we have conducted a narrative literature review about using the AVL to vascularize tissue-engineering constructs at the preclinical level. We have also conducted a systematic literature review about applying the technique of axial vascularization in the field of craniofacial regeneration. The versatility of the technique and the possible challenges are discussed, and a suggested protocol for the first clinical trial applying the AVL technique for mandibular reconstruction is also presented.

En bloc prefabrication of vascularized bioartificial bone grafts in sheep and complete workflow for custom-made transplants.

The aim of this pilot study was to determine, in a new experimental model, whether complex bioartificial monoblocs of relevant size and stability can be prefabricated in a defined three-dimensional design, in which the latissimus dorsi muscle serves as a natural bioreactor and the thoracodorsal vessel tree is prepared for axial construct perfusion. Eighteen sheep were included in the study, with six animals in each of three experimental groups. Vitalization of the ß-tricalcium phosphate-based constructs was performed by direct application of unmodified osteogenic material from the iliac crest (group A), in vivo application of nucleated cell concentrate (NCC) from bone marrow aspirate (group B), and in vitro cultivation of bone marrow stromal cells (BMSC) in a perfusion bioreactor system (group C). The contours of the constructs were designed digitally and transferred onto the bioartificial bone grafts using a titanium cage, which was bent over a stereolithographic model of the defined subvolume intraoperatively. At the end of the prefabrication process, only the axial vascularized constructs of group A demonstrated vital bone formation with considerable stability. In groups B and C, the applied techniques were not able to induce ectopic bone formation. The presented computer-assisted workflow allows the prefabrication of custom-made bioartificial transplants.