Biofilms Controlling in Industrial Cooling Water Systems: A Mini-Review of Strategies and Best Practices.

Biofilm formation and growth is a significant concern for water treatment professionals, as it can lead to the contamination of water systems and pose a threat to public health. Biofilms are complex communities of microorganisms that adhere to surfaces and are embedded in an extracellular matrix of polysaccharides and proteins. They are notoriously difficult to control, as they provide a protective environment for bacteria, viruses, and other harmful organisms to grow and proliferate. This review article highlights some of the factors that favor biofilm growth, as well as various strategies for controlling biofilm in water systems. Adopting the best available technologies, such as wellhead protection programs, proper industrial cooling water system maintenance, and filtration and disinfection, can prevent the formation and growth of biofilms in water systems. A comprehensive and multifaceted approach to biofilm control can reduce the occurrence of biofilms and ensure the delivery of high-quality water to the industrial process.

Mini-Review of Biofilm Interactions with Surface Materials in Industrial Piping System.

The growth of biofilm, which is caused by microorganism accumulation and growth on wetted surfaces, may damage industrial piping systems, increase maintenance and cleaning costs for the system sterilization, and even divulge the immune system into high risk. This article systematically analyzes the biofilm interactions with piping surface materials from the perspectives of physical convection, and biological and chemical adhesion. The thermodynamics of the flow, bacterial surface sensing, and bio-communication are the most critical factors for biofilm attachment. Furthermore, experimental analysis methods as well as biofilm control and removal approaches, are also included in this study. Finally, the resistance and growth of biofilm, as well as the practical and advanced methodology to control the biofilm and challenges associated with technology, are also discussed. Moreover, this paper may also offer a significant reference for the practice and strategic applications to address the biofilm resistance issues in industrial piping.

Mapping Bacterial Biofilm on Features of Orthopedic Implants In Vitro.

Implant-associated infection is a major complication of orthopedic surgery. One of the most common organisms identified in periprosthetic joint infections is Staphylococcus aureus, a biofilm-forming pathogen. Orthopedic implants are composed of a variety of materials, such as titanium, polyethylene and stainless steel, which are at risk for colonization by bacterial biofilms. Little is known about how larger surface features of orthopedic hardware (such as ridges, holes, edges, etc.) influence biofilm formation and attachment. To study how biofilms might form on actual components, we submerged multiple orthopedic implants of various shapes, sizes, roughness and material type in brain heart infusion broth inoculated with Staphylococcus aureus SAP231, a bioluminescent USA300 strain. Implants were incubated for 72 h with daily media exchanges. After incubation, implants were imaged using an in vitro imaging system (IVIS) and the metabolic signal produced by biofilms was quantified by image analysis. Scanning electron microscopy was then used to image different areas of the implants to complement the IVIS imaging. Rough surfaces had the greatest luminescence compared to edges or smooth surfaces on a single implant and across all implants when the images were merged. The luminescence of edges was also significantly greater than smooth surfaces. These data suggest implant roughness, as well as large-scale surface features, may be at greater risk of biofilm colonization.

In-situ monitoring AHL-mediated quorum-sensing regulation of the initial phase of wastewater biofilm formation.

Initial attachment plays an important role in biofilm formation in wastewater treatment processes. However, the initial attachment process mediated by N-acyl-homoserine lactones (AHLs) is difficult to be fully understood due to the lack of non-invasive and on-line investigation techniques. In this study, the AHL-regulated wastewater biofilm attachment was quantified using ultrasonic time-domain reflectometry (UTDR) as an in-situ and non-invasive monitoring technique. Results demonstrated that the reversible adhesion time in municipal and industrial wastewaters was significantly decreased in the presence of exogenous AHLs. Biofilm thickness in municipal and industrial wastewaters increased significantly with the addition of exogenous AHLs. Also, the addition of acylase delayed the initial biofilm formation (lengthened reversible adhesion time and decreased biofilm thickness and density). Compared with biofilm behavior in the presence of low concentrations of AHLs (4.92 ± 0.17 µg/L), both reversible adhesion time and biofilm thickness were not significantly increased (p > 0.05) with an increase in AHL concentration (9.75 ± 0.41 µg/L). Furthermore, the addition of exogenous AHLs resulted in significant changes in the attached bacterial community structures, in which both QS and quorum-quenching (QQ) bacteria were stimulated. The current work presents an effective approach to in-situ monitoring of the regulation of AHL-mediated QS in the initial attachment of biofilms, especially in the reversible adhesion process, which may provide a potential strategy to facilitate biofilm establishment in wastewater treatment processes.

A bilayer coarse-fine infiltration system minimizes bioclogging: The relevance of depth-dynamics.

Bioclogging is a main concern in infiltration systems as it may significantly shorten the service life of these low-technology water treatment methods. In porous media, biofilms grow to clog partially or totally the pore network. Dynamics of biofilm accumulation (e.g., by attachment, detachment, advective transport in depth) and their impact on both surface and deep bioclogging are still not yet fully understood. To address this concern, a 104 day-long outdoor infiltration experiment in sand tanks was performed, using secondary treated wastewater and two grain size distributions (GSDs): a monolayer system filled with fine sand, and a bilayer one composed by a layer of coarse sand placed on top of a layer of fine sand. Biofilm dynamics as a function of GSD and depth were studied through cross-correlations and multivariate statistical analyses using different parameters from biofilm biomass and activity indices, plus hydraulic parameters measured at different depths. Bioclogging (both surface and deep) was found more significant in the monolayer fine system than in the bilayer coarse-fine one, possibly due to an early low-cohesive biofilm formation in the former, driven by lower porosity and lower fluxes; under such conditions biomass is favorably detached from the top layer, transported and accumulated in depth, so that new biomass might colonize the surface. On the other hand, in the bilayer system, fluxes are highest, and the biofilm is still in a growing phase, with low biofilm detachment capability from the top sand layer and high microbial activity in depth, resulting in low bioclogging. Overall, the bilayer coarse-fine system allows infiltrating higher volume of water per unit of surface area than the monolayer fine one, minimizing surface and deep bioclogging, and thus increasing the longevity and efficiency of infiltration systems.