Colloidal Characteristics of Poly(L-Lactic Acid)-b-Poly (ε-Caprolactone) Block Copolymer-Based Nanoparticles Obtained by an Emulsification/Evaporation Method.

Poly(L-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL), two biodegradable and biocompatible polymers that are commonly used for biomedical applications, are, respectively, the result of the ring-opening polymerization of LA and ε-CL, cyclic esters, which can be produced according to several mechanisms (cationic, monomer-activated cationic, anionic, and coordination-insertion), except for L-lactide, which is polymerized only by anionic, cationic, or coordination-insertion polymerization. A series of well-defined PLLA-b-PCL block copolymers have been obtained starting from the same PLLA homopolymer, having a molar mass of 2500 g·mol-1, and being synthesized by coordination-insertion in the presence of tin octoate. PCL blocks were obtained via a cationic-activated monomer mechanism to limit transesterification reactions, and their molar masses varied from 1800 to 18,500 g·mol-1. The physicochemical properties of the copolymers were determined by 1H NMR, SEC, and DSC. Moreover, a series of nanoparticles (NPs) were prepared starting from these polyester-based copolymers by an emulsification/evaporation method. The sizes of the obtained NPs varied between 140 and 150 nm, as a function of the molar mass of the copolymers. Monomodal distribution curves with PDI values under 0.1 were obtained by Dynamic Light Scattering (DLS) and their spherical shape was confirmed by TEM. The increase in the temperature from 25 to 37 °C induced only a very slight decrease in the NP sizes. The results obtained in this preliminary study indicate that NPs have a temperature stability, allowing us to consider their use as drug-loaded nanocarriers for biomedical applications.

Spectroscopic and Thermal Characterisation of Interpenetrating Hydrogel Networks (IHNs) Based on Polymethacrylates and Pluronics, and Their Physicochemical Stability under Aqueous Conditions.

This study describes the physicochemical characterisation of interpenetrating hydrogel networks (IHNs) composed of either poly(hydroxyethylmethacrylate, p(HEMA)) or poly(methacrylic acid, p(MAA)), and Pluronic block copolymers (grades F127, P123 and L121). IHNs were prepared by mixing the acrylate monomer with Pluronic block copolymers followed by free radical polymerisation. p(HEMA)-Pluronic blends were immiscible, evident from a lack of interaction between the two components (Raman spectroscopy) and the presence of the glass transitions (differential scanning calorimetry, DSC) of the two components. Conversely, IHNs of p(MAA) and each Pluronic were miscible, displaying a single glass transition and secondary bonding between the carbonyl group of p(MAA) and the ether groups in the Pluronic block copolymers (Raman and ATR-FTIR spectroscopy). The effect of storage of the IHNs in Tris buffer on the physical state of each Pluronic and on the loss of Pluronic from the IHNs were studied using DSC and gravimetric analysis, respectively. Pluronic loss from the IHNs was dependent on the grade of Pluronic, time of immersion in Tris buffer, and the nature of the IHN (p(HEMA) or p(MAA)). At equilibrium, the loss was greater from p(HEMA) than from p(MAA) IHNs, whereas increasing ratio of poly(propylene oxide) to poly(ethylene oxide) decreased Pluronic loss. The retention of each Pluronic grade was shown to be primarily due to its micellization; however, hydrogen bonding between Pluronic and p(MAA) (but not p(HEMA)) IHNs contributed to their retention.

Self-Assembly of Hierarchical Silicon-Containing Block Copolymers with Cross-Linkable 3 nm Smectic Motifs for Nanopatterning and Osmotic Energy Conversion Membranes.

Highly-dense small-feature-size nanopatterns and nanoporous membranes are important in advanced microelectronics, nanofiltration, and biomimic device manufacturing. Here, we report the synthesis and self-assembly of a series of high-interaction-parameter (high-χ) silicon-containing hierarchical block copolymers (BCPs) with cross-linkable subordering chalcone motifs, which possess both an intrinsic native etching contrast for nanofabrication and cross-linkability under ultraviolet light for generating free-standing membranes. BCPs with a volume fraction of chalcone block of 55-74% form ordered primary nanostructures with period 15-22 nm including lamellae, double gyroid, hexagonally packed cylinders, and body-centered cubic spheres of the minority Si-containing block. The majority PChMA block self-assembles into a highly ordered 3 nm smectic sublattice, and cross-linking after self-assembly enables the formation of free-standing isoporous membranes. Both silicon oxide nanopatterns and free-standing nanoporous osmotic energy conversion membranes are generated by etching films of these BCPs. This work demonstrates that the combination of hierarchical ordering and cross-linkable motifs in a high-interaction parameter BCP enables applications in both nanofabrication and free-standing functional porous membranes.

Synthesis and Self-Assembly of Poly(4-acetoxystyrene) Cubosomes.

Polymer cubosomes (PCs) are a recent class of self-assembled nanostructures with great application potential due to their high porosity and surface area. Currently, most reported PCs consist of polystyrene block copolymers (BCPs), for which self-assembly parameters are rather well understood. Changing the block chemistry would be desirable to introduce more functionality; however, knowledge of adapting the self-assembly process to new chemistries remains limited. This work, reports on synthesizing poly(ethylene oxide)-block-poly(4-acetoxystyrene) and its copolymers with styrene, and provide conditions for their self-assembly into PCs with high yield and high inner order. It is shown that the polarity of the starting solvent toward the corona block allows tuning of the final morphology by controlling the corona volume and packing parameter.

Building Ultrastrong, Tough and Biodegradable Thermoplastic Elastomers from Multiblock Copolyesters via a "Reserve-Release" Crystallization Strategy.

Simultaneously attaining high strength and toughness has been a significant challenge in designing thermoplastic elastomers, especially biodegradable ones. In this context, we present a class of biodegradable elastomers based on multiblock copolyesters that afford extraordinary strength, toughness, and low-strain resilience despite expedient chemical synthesis and sample processing. With the incorporation of the semi-crystalline soft block and the judicious selection of block periodicity, the thermoplastic materials feature low quiescent crystallinity ("reserve") albeit with vast potential for strain-induced crystallization ("release"), resulting in their significantly enhanced ultimate strength and energy-dissipating capabilities. Moreover, a breadth of mechanical responses of the materials - from reinforced elastomers to shape-memory materials to toughened thermoplastics - can be achieved by orthogonal variation of segment lengths and ratios. This work and the "reserve-release" crystallization strategy herein highlight the double crystalline multiblock chain architecture as a potential avenue towards reconciling the strength-toughness trade-off in thermoplastic elastomers and can possibly be extended to other biodegradable building blocks to deliver functional materials with diverse mechanical performances.

Synthesis, Biological Evaluation and Reversal of Sulfonated Di- and Triblock Copolymers as Novel Parenteral Anticoagulants.

Despite targeting different coagulation cascade sites, all Food and Drug Administration-approved anticoagulants present an elevated risk of bleeding, including potentially life-threatening intracranial hemorrhage. Existing studies have not thoroughly investigated the efficacy and safety of sulfonate polymers in animal models and fully elucidate the precise mechanisms by which these polymers act. The activity and safety of sulfonated di- and triblock copolymers containing poly(sodium styrenesulfonate) (PSSS), poly(sodium 2-acrylamido-2-methylpropanesulfonate) (PAMPS), poly(ethylene glycol) (PEG), poly(sodium methacrylate) (PMAAS), poly(acrylic acid) (PAA), and poly(sodium 11-acrylamidoundecanoate) (PAaU) blocks are synthesized and assessed. PSSS-based copolymers exhibit greater anticoagulant activity than PAMPS-based ones. Their activity is mainly affected by the total concentration of sulfonate groups and molecular weight. PEG-containing copolymers demonstrate a better safety profile than PAA-containing ones. The selected copolymer PEG47-PSSS32 exhibits potent anticoagulant activity in rodents after subcutaneous and intravenous administration. Heparin Binding Copolymer (HBC) completely reverses the anticoagulant activity of polymer in rat and human plasma. No interaction with platelets is observed. Selected copolymer targets mainly factor XII and fibrinogen, and to a lesser extent factors X, IX, VIII, and II, suggesting potential application in blood-contacting biomaterials for anticoagulation purposes. Further studies are needed to explore its therapeutic applications fully.

Block Copolymers of Poly(N-Vinyl Pyrrolidone) and Poly(Vinyl Esters) Bearing n-alkyl Side Groups via Reversible Addition-Fragmentation Chain-Transfer Polymerization: Synthesis, Characterization, and Thermal Properties.

Amphiphilic block copolymers of N-vinyl pyrrolidone (NVP) and various vinyl esters (VEs), PNVP-b-PVEs, namely vinyl butyrate (VBu), vinyl decanoate (VDc), and vinyl stearate (VSt), were synthesized through RAFT polymerization techniques. The sequential addition of the monomers methodology was employed starting from the polymerization of NVP followed by the polymerization of the Ves' monomer. The polymerization of NVP was conducted at 60 °C in benzene solution using AIBN as the initiator and O-ethyl S-(phthalimidylmethyl) xanthate as the CTA. The resulting PNVP macro-CTA was further applied for the polymerization of the vinyl ester in dioxane solution at 80 °C using, again, AIBN as the initiator. The block copolymers were characterized through size-exclusion chromatography (SEC) and NMR spectroscopy. The thermal behavior of the copolymers was studied by Differential Scanning Calorimetry (DSC), whereas their thermal stability via Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG).

A Super-Ionic Solid-State Block Copolymer Electrolyte.

Polymer solid-state electrolytes offer great promise for battery materials with high energy density, mechanical stability, and improved safety. However, their low ion conductivities have so far limited their potential applications. Here, it is shown for poly(ethylene oxide) block copolymers that the super-stoichiometric addition of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) as lithium salt leads to the formation of a crystalline PEO block copolymer phase with exceptionally high ion conductivities and low activation energies. The addition of LiTFSI further induces block copolymer phase transitions into bi-continuous Fddd and gyroid network morphologies, providing continuous 3D conduction pathways. Both effects lead to solid-state block copolymer electrolyte membranes with ion conductivities of up to 1·10-1 S cm-1 at 90 °C, decreasing only moderately to 4·10-2 S cm-1 at room temperature, and to >1·10-3 S cm-1 at -20 °C, corresponding to activation energies as low as 0.19 eV. The co-crystallization of PEO and LiTFSI with ether and carbonate solvents is observed to play a key role to realize a super-ionic conduction mechanism. The discovery of PEO super-ionic conductivity at high lithium concentrations opens a new pathway for fabrication of solid polymer electrolyte membranes with sufficiently high ion conductivities over a broad temperature range with widespread applications in electrical devices.

Photoinduced anisotropy in thin films of azobenzene-containing liquid crystalline supramolecular complexes of various polymer architecture.

Light patternable colorless liquid crystalline (LC) polymers are promising materials for functional photonic devices with broad applications in optical communication, diffractive optics, and displays. This work reports photoinduced optical anisotropy in thin films of azobenzene-containing (Azo) LC block copolymer supramolecular complexes, which can be decolorized after light patterning providing colorless patterned birefringent polymer films. The supramolecular complexes are prepared via intermolecular pyridine-phenol hydrogen bonding between a low-molecular-weight Azo phenol and host LC AB diblock and ABA triblock copolymers consisted of LC phenylbenzoate (PhM) blocks and poly(vinylpyridine) units. The molecular architecture of the host polymers and the morphological pattern formed by the complexes can affect orientational behavior of Azo groups under irradiation with linearly polarized light. Photoorientation of hydrogen-bonded Azo groups is accompanied by the cooperative orientation of non-photochromic PhM units, which form individual microphases and stabilize the orientation of Azo groups. This effect is specific for block copolymer complexes and it is absent for random copolymer complex, which is used as a reference sample. Optical anisotropy induced in films of the block copolymer complexes can be amplified by heating above the glass transition temperature and subsequent rinsing with diethyl ether allows colorless birefringent polymer films to be prepared.

Synthesis and evaluation of novel urethane macromonomers for the formulation of fracture tough 3D printable dental materials.

3D printing of materials which combine fracture toughness, high modulus and high strength is quite challenging. Most commercially available 3D printing resins contain a mixture of multifunctional (meth)acrylates. The resulting 3D printed materials are therefore brittle and not adapted for the preparation of denture bases. For this reason, this article focuses on toughening by incorporation of triblock copolymers in methacrylate-based materials. In a first step, three urethane dimethacrylates with various alkyl spacer length were synthesized in a one-pot two-step synthesis. Each monomer was combined with 2-phenoxyethyl methacrylate as a monofunctional monomer and a polycaprolactone-polydimethylsiloxane-polycaprolactone triblock copolymer was added as toughener. The formation of nanostructures via self-assembly was proven by small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The addition of the triblock copolymer resulted in a strong increase in fracture toughness for all mixtures. The nature of the urethane dimethacrylate had a significant impact on fracture toughness and flexural strength and modulus of the cured materials. Most promising systems were also investigated via dynamic fatigue propagation da/dN measurements, confirming that the toughening also works under dynamic load. By carefully selecting the length of the urethane dimethacrylate spacer and the amount of block copolymer, materials with the desired physical properties could be efficiently formulated. Especially the formulation containing the medium alkyl spacer length (DMA2/PEMA) and 5 wt% BCP1 (block copolymer), exhibits excellent mechanical properties and high fracture toughness.

Programmable Reconfiguration of Supramolecular Bottlebrush Block Copolymers: From Solution Self-Assembly to Co-Crystallization-Assistant Self-Assembly.

Achieving structural reconfiguration of supramolecular bottlebrush block copolymers toward topological engineering is of particular interest but challenging. Here, we address the creation of supramolecular architectures to discover how assembled topology influences the structured aggregates, combining hydrogen-bonded (H-bonded) bottlebrush block copolymers and electrostatic interaction induced polymer/inorganic eutectics. We first design H-bonding linear-brush block copolymer P(NBDAP-co-NBC)-b-P(NBPEO), bearing linear block P(NBDAP-co-NBC) (poly(norbornene-terminated diaminopyridine-co-norbornene-terminated hexane)) with pendant H-bonding DAP (diaminopyridine) motifs, and PEO (poly(ethylene oxide)) densely grafted P(NBPEO) brush block. Thanks to H-bonding association between DAP and thymine (Thy), incorporation of Thy-functionalized polystyrene (Thy-PS65) enables solution self-assembly and formation of H-bonded bottlebrush block copolymers, generating augmented nanospheres with increasing Thy-PS65 amount. Noteworthy that integration of inorganic cluster silicotungstic acid (STA) to P(NBC-co-NBDAP)-b-P(NBPEO), endows the formation of PEO/STA eutectic core. Therefore, co-crystallization-assistant self-assembly at the interfaces of polymeric, inorganic and supramolecular chemistry is realized, reflecting multi-stage morphology transformation from hexagonal platelets, needle-like, curved rod-like micelles, finally to end-to-end closed rings, by gradually increasing Thy-PS65 while fixing STA content. Interestingly, such solution self-assembly to co-crystallization-assistant self-assembly strategy not only endows unique nanostructure transition, also induce in-to-out reconfiguration of PS domains. These findings clearly provide unique methodology towards programmable fabrication of geometrical objects promising in smart materials.

Mechanochemical Diversity in Block Copolymers.

Covalent polymer chains are known to undergo mechanochemical events when subjected to mechanical forces. Such force-coupled reactions, like C-C bond scission in homopolymers, typically occur in a non-selective manner but with a higher probability at the mid-chain. In contrast, block copolymers (BCPs), composed of two or more chemically distinct chains linked by covalent bonds, have recently been shown to exhibit significantly different mechanochemical reactivities and selectivities. These differences may be attributable to the atypical conformations adopted by their chains, compared to the regular random coil. Beyond individual molecules, when BCPs self-assemble into ordered aggregates in solution, the non-covalent interactions between the chains lead to meaningful acceleration in the activation of embedded force-sensitive motifs. Furthermore, the microphase segregation of BCPs in bulk creates periodically dispersed polydomains, locking the blocks in specific conformations which have also been shown to affect their mechanochemical reactivity, with different morphologies influencing reactivity to varying extents. This review summarizes the studies of mechanochemistry in BCPs over the past two decades, from the molecular level to assemblies, and up to bulk materials.

Block Copoly (Ester-Carbonate) Electrolytes for LiFePO4|Li Batteries with Stable Cycling Performance.

To address the challenges posed by the narrow oxidation decomposition potential window and the characteristic of low ionic conductivity at room temperature of solid polymer electrolytes (SPEs), carbon dioxide (CO2), epichlorohydrin (PO), caprolactone (CL), and phthalic anhydride (PA) were employed in synthesizing di-block copolymer PCL-b-PPC and PCL-b-PPCP. The carbonate and ester bonds in PPC and PCL provide high electrochemical stability, while the polyether segments in PPC contribute to the high ion conductivity. To further improve the ion conductivity, we added succinonitrile as a plasticizer to the copolymer and used the copolymer to assemble lithium metal batteries (LMBs) with LiFePO4 as the cathode. The LiFePO4/SPE/Li battery assembled with PCL-b-PPC electrolyte exhibited an initial discharge-specific capacity of 155.5 mAh·g-1 at 0.5 C and 60 °C. After 270 cycles, the discharge-specific capacity was 140.8 mAh·g-1, with a capacity retention of 90.5% and an average coulombic efficiency of 99%, exhibiting excellent electrochemical performance. The study establishes the design strategies of di-block polymer electrolytes and provides a new strategy for the application of LMBs.

Association of Thermoresponsive Diblock Copolymer PDEGMA-b-PDIPAEMA in Aqueous Solutions: The Influence of Terminal Groups.

Aqueous solutions of a thermoresponsive diblock copolymer poly(di-[ethylene glycol] methyl ether methacrylate)-b-poly(2-[diisopropylamino] ethyl methacrylate) (PDEGMA-b-PDIPAEMA) were studied by static, dynamic and electrophoretic light scattering, small-angle X-ray scattering and differential scanning calorimetry. Thermoresponsive behavior of PDEGMA-b-PDIPAEMA was investigated at two pH values, pH = 2, at which the terminal carboxylic group of the PDEGMA chain and the PDIPAEMA block are protonated, and pH = 7, where the carboxyl terminal group is ionized while the PDIPAEMA block is partially deprotonated and more hydrophobic. Both at pH = 2 and 7, PDEGMA-b-PDIPAEMA copolymer underwent extensive association (the size of the aggregates was between 100 and 300 nm), indicating strong interchain interactions. While the measurements confirmed thermoresponsive behavior of PDEGMA-b-PDIPAEMA at pH = 7, no changes in the association with temperature were observed at pH 2 as the thermoresponsivity of PDEGMA was suppressed by hydrogen bonding between carboxylic groups and PDEGMA segments, as well as due to the increased hydrophilicity of the PDIPAEMA block. Fluorescence measurements with pyrene as a fluorescent probe showed that both at pH = 2 and pH = 7 the associates were able to solubilize hydrophobic substances.

Ferrocene-Modified Polyacrylonitrile-Containing Block Copolymers as Preceramic Materials.

In the pursuit of fabricating functional ceramic nanostructures, the design of preceramic functional polymers has garnered significant interest. With their easily adaptable chemical composition, molecular structure, and processing versatility, these polymers hold immense potential in this field. Our study succeeded in focusing on synthesizing ferrocene-containing block copolymers (BCPs) based on polyacrylonitrile (PAN). The synthesis is accomplished via different poly(acrylonitrile-block-methacrylate)s via atom transfer radical polymerization (ATRP) and activators regenerated by electron transfer ATRP (ARGET ATRP) for the PAN macroinitiators. The molecular weights of the BCPs range from 44 to 82 kDa with dispersities between 1.19 and 1.5 as determined by SEC measurements. The volume fraction of the PMMA block ranges from 0.16 to 0.75 as determined by NMR. The post-modification of the BCPs using 3-ferrocenyl propylamine has led to the creation of redox-responsive preceramic polymers. The thermal stabilization of the polymer film has resulted in stabilized morphologies based on the oxidative PAN chemistry. The final pyrolysis of the sacrificial block segment and conversion of the metallopolymer has led to the formation of a porous carbon network with an iron oxide functionalized surface, investigated by scanning electron microscopy (SEM), energy dispersive X-ray mapping (EDX), and powder X-ray diffraction (PXRD). These findings could have significant implications in various applications, demonstrating the practical value of our research in convenient ceramic material design.

Potential of Benchtop NMR for the Determination of Polymer Molar Masses, Molar Mass Distributions, and Chemical Composition Profiles by Means of Diffusion-Ordered Spectroscopy, DOSY.

The determination of molar masses and their distributions is crucial in polymer synthesis and design. This work presents the current performance and limitations of diffusion-ordered spectroscopy (DOSY) on a low-field (benchtop) NMR spectrometer (at 90 MHz) as an alternative to size exclusion chromatography (SEC) for determining diffusion coefficient distributions (DCDs) and molar mass distributions (MMDs). After optimization for narrowly distributed homopolymers, MMDs obtained with inverse Laplace transformation (ILT) and log-normal distribution are compared with average molar masses obtained with mono- and bi-exponential fits, as well as MMDs obtained from SEC. This approach enables ILT to determine DCDs and MMDs even for bimodal homopolymers with fully spectrally overlapping signals and block copolymers with various chemical compositions, for which chemical composition profiles are determined. The feasibility of low-field diffusion NMR with samples dissolved in non-deuterated solvents is further demonstrated and methods for solvent suppression are discussed.

Crystallization-Driven Controlled 2D Self-Assemblies via Aqueous RAFT Emulsion Polymerization.

Aqueous emulsion polymerization is a robust technique for preparing nanoparticles of block copolymers; however, it typically yields spherical nanoassemblies. The scale preparation of nanoassemblies with nonspherical high-order morphologies is a challenge, particularly 2D core-shell nanosheets. In this study, the polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) are combined to demonstrate the preparation of 2D nanosheets and their aggregates via aqueous reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization. First, the crucial crystallizable component for CDSA, hydroxyethyl methacrylate polycaprolactone (HPCL) macromonomer is synthesized by ring opening polymerization (ROP). Subsequently, the RAFT emulsion polymerization of HPCL is conducted to generate crystallizable nanomicelles by a grafting-through approach. This PISA process simultaneously prepared spherical latices and bottlebrush block copolymers comprising poly(N',N'-dimethylacrylamide)-block-poly(hydroxyethyl methacrylate polycaprolactone) (PDMA-b-PHPCL). The latexes are now served as seeds for inducing the formation of 2D hexagonal nanosheets, bundle-shaped and flower-like aggregation via the CDSA of PHPCL segments and unreacted HPCL during cooling. Electron microscope analysis trace the morphology evolution of these 2D nanoparticles and reveal that an appropriate crystallized component of PHPCL blocks play a pivotal role in forming a hierarchical structure. This work demonstrates significant potential for large-scale production of 2D nanoassemblies through RAFT emulsion polymerization.

Intrinsically Elastic Semiconductors through Aldehyde-Amine Polycondensation and Its Application on Stretchable Transistor.

With the increasing demand for elastic electronics, as a crucial component, elastic semiconductors have been widely studied. However, there are some issues for the current preparation of elastic semiconductors, such as harsh reaction conditions, low atomic economic utilization, and complicated product separation and purification. Aldehyde-amine polycondensation is an important chemical reaction with the advantages of mild reaction conditions, high atomic-economic efficiency, and easy separation and purification. Herein, intrinsically elastic semiconductors are developed via aldehyde-amine polycondensation, including a semiconducting segment and an elastic segment. The resulting polymer containing 42.62 wt % soft segments exhibits excellent stretchability and mechanical reversibility, especially with a lower modulus. Interestingly, the carrier mobility displays up to 0.04 cm2·V-1·s-1, in the range of the fully conjugated reference polymer (0.1 cm2·V-1·s-1). In brief, this strategy provides important guiding principles for the development of intrinsically elastic polymer semiconductors.

Isoporous Membranes by the Symmetric Triblock Copolymer: A Strategy to Improve the Mechanical Strength without Sharply Changing the Pore Size and Permselectivity.

Isoporous membranes produced from diblock copolymers commonly display a poor mechanical property that shows many negative impacts on their separation application. It is theoretically predicted that dense films produced from symmetric triblock copolymers show much stronger mechanical properties than those of homologous diblock copolymers. However, to the best of our knowledge, symmetric triblock copolymers have rarely been fabricated into isoporous membranes before, and a full understanding of separation as well as mechanical properties of membranes prepared from triblock copolymers and homologous diblock copolymers has not been conducted, either. In this work, a cleavable symmetric triblock copolymer with polystyrene as the side block and poly(4-vinylpyridine) (P4VP) as the middle block was synthesized and designed by the RAFT polymerization using the symmetric chain transfer agent, which located at the center of polymer chains and could be removed to produce homologous diblock copolymers with half-length while having the same composition as that found in triblock copolymers. The self-assembly of these two copolymers in thin films and casting solutions was first investigated, observing that they displayed similar self-organized structures under these two conditions. When fabricated into isoporous membranes, they showed similar pore sizes (5-7% difference) and comparable rejection performance (∼10% difference). However, isoporous membranes produced from triblock copolymers showed significantly improved mechanical strength and higher toughness (2-10 times larger) as evidenced by the compacting resistance, strain-stress determination, and nanoindentation testing, suggesting the unique and novel structure-performance relationship in the isoporous membranes produced from symmetric triblock copolymers. The above finding will guide the way to fabricate mechanically robust isoporous membranes without notably changing the separation performance from rarely used symmetric triblock copolymers, which can be synthesized by the controlled polymerization as facilely as that found for diblock copolymers.

Fully Degradable Polyphosphoester Cubosomes for Sustainable Agrochemical Delivery.

Microplastic pollution and the urgent need for sustainable agriculture have raised interest in developing degradable carriers for controlled agrochemical release. Porous polymeric particles are particularly promising due to their unique release profiles compared to solid or core-shell carriers. However, creating degradable, mesoporous (2-50 nm) microparticles is challenging, and their potential for agrochemical delivery is largely unexplored. A straightforward self-assembly method is demonstrated for fully degradable porous polymer cubosomes (PCs), showcasing their ability to load and release agrochemicals. Using fully degradable block copolymers (BCPs), poly(ethyl ethylene phosphate)-b-polylactide (PEEP-b-PLA), PCs are synthesized in water with high inner order and open pores averaging 19 ± 3 nm in diameter. During the self-assembly process in the presence of the hydrophobic fungicide tebuconazole, polymersomes transform into PCs by enriching the hydrophobic polymer domain and altering the BCP packing parameter. After self-assemby, highly porous and fungicide-loaded PCs are obtained. Fungicide-loaded PCs show high antimycotic activity against Botrytis cinerea (grey mold), adhere to Vitis vinifera Riesling leaves even after simulated rain, and release the fungicide continuously over several days with different release-kinetics compared to solid particles. PCs hydrolyze completely into lactic acid and phosphate derivatives, highlighting their potential as microplastic-free agrochemical delivery systems for sustainable agriculture.