Utilizing Nano-Adsorbents and Electrostatic Field Treatment for Sustainable Refinement of Crude Canola Oil.

Removal of polar impurities, such as phospholipids, free fatty acids (FFA), and peroxides, can be challenging during the refining of crude canola oil. Current conventional refining methods are energy-intensive (e.g., hot water washes) and can generate significant waste (e.g., wastewater effluent) and neutral oil loss. This study investigated the joint use of nano-adsorbents and electrostatic field (E-field) treatment as a potential and sustainable alternative in removing these impurities during the oil refining process. Specifically, aluminum oxide (Al2O3) nanoparticles were employed to neutralize FFAs, achieving a 62.4% reduction in acid value while preserving the fatty acid profile of the oil. After refining, E-field treatment was successful in removing the spent nano-adsorbent from solution (up to 72.3% by weight), demonstrating enhanced efficiency compared to conventional methods (e.g., gravitational settling, filtration, and centrifugation). The neutral oil loss using Al2O3 nano-adsorbents was also comparable to conventional refining methods, with a 4.38% (by weight) loss. After E-field treatment, the Al2O3 nano-adsorbent was then calcined to assess reusability. The Al2O3 nano-adsorbent was effectively recycled for three refining cycles. the methods do not use of large amounts of water and generate minimal waste byproducts (e.g., effluent). Nonetheless, while the nano-adsorbents demonstrated promising results in FFA removal, they were less effective in eliminating peroxides and pigments. E-field techniques were also effective in removing spent nano-adsorbent; although, optimization of E-field parameters could further improve its binding capacity. Finally, future studies could potentially focus on the physicochemical modifications of the nano-adsorbent material to enhance their refining capacity and reusability. Overall, this study presents a sustainable alternative or addition to conventional refining methods and lays the groundwork for future research.

An Efficient Fluorescence-Activated Protoplast Sorting (FAPS) and Regeneration Protocol for Canola (Brassica napus).

Protoplast sorting and purification methods are powerful tools enabling the enrichment of cellular subpopulations for basic and applied studies in plant sciences. Fluorescence-activated protoplast sorting (FAPS) is an efficient method to isolate specific protoplast populations based on innate features (size and autofluorescence) or expression of fluorescent proteins. FAPS-based methods have recently been deployed in single-cell purification for single-cell RNA sequencing-based transcriptional profiling studies. Protoplast sorting methods integrated with the ability to culture and recover whole plants add value to functional genomics and gene editing applications. Enriching cells expressing nucleases linked to fluorescent proteins can maximize knockout or knockin editing efficiencies and minimize toxic and off-target effects. Here, we report the protocol for protoplast preparation, sterile cell sorting, culture, and downstream regeneration of plants from canola protoplasts. This protocol can be successfully applied to all totipotent protoplast methods that can regenerate into whole plants. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Preparation of transfected canola protoplasts for sorting Basic Protocol 2: Fluorescence-activated protoplast sorting Basic Protocol 3: Bead culture of sorted protoplasts and recovery of plantlets.

Antioxidative and Metabolic Responses in Canola: Strategies with Wood Distillate and Sugarcane Bagasse Ash for Improved Growth under Abiotic Stress.

In the context of increasing agricultural challenges posed by soil salinity and drought stress, the main importance of the present study was to evaluate some novel treatments for improving canola productivity and resilience by applying wood distillate (WD) in combination with bagasse ash (SBA). A two-year field experiment using a split plot design was conducted and evaluated several physiological and biochemical parameters under different irrigation regimes conducted at 80% and 50% field capacity. While there were considerable moderation effects of SBA and WD on soil salinity, expressed as exchangeable sodium percentage (ESP), under both well-irrigated and drought conditions, more importantly, the ESP was reduced to 31% under drought stress with combined WD and SBA applications over any single factor. WD and SBA treatments of canola leaves showed reduced Na content with increased K levels, and the plants maintained physiological attributes-chlorophyll content, stomatal conductance, and relative water content-to the level of controls of well-irrigation. Besides, they significantly alleviated oxidative stress by decreasing the hydrogen peroxide (H2O2), malondialdehyde (MDA), and electrolyte leakage (EL) levels and increasing the activities of antioxidant enzymes like superoxide dismutase (SOD) and ascorbate peroxidase (APX). Nonenzymatic antioxidants such as total soluble sugars (TSS), total soluble proteins (TSP), total phenolic content (TPC), and total flavonoid content (TFC) were significantly increased under stress conditions with a special accent on combined treatment, whereas the levels of proline and GB that increased in alignment with drought reduced under the combined application. Various growth parameters of plants like plant height, number of branches, and siliques per plant were significantly improved with WD and SBA under drought stress. Principal component analysis (PCA) and Pearson correlation further confirmed the relationships among these parameters and thus underpinned that WD and SBA can evoke a synergistic effect to enhance growth promotion and stress tolerance in canola. This, therefore, infers that the combined application of WD and SBA can be key, offering very high potential as viable options to better canola productivity under adverse environmental conditions.

Effect of mineral and organic fertilizer on N dynamics upon erosion-induced topsoil dilution.

Erosion-induced topsoil dilution strongly affects cropland biogeochemistry and is associated with a negative effect on soil health and crop productivity. While its impact on soil C cycling has been widely recognized, there is little information about its impact on soil N cycling and N fertilizer dynamics. Here, we studied three factors potentially influencing N cycling and N fertilizer dynamics in cropping systems, namely: 1.) soil type, 2.) erosion-induced topsoil dilution and 3.) N fertilizer form, in a full-factorial pot experiment using canola plants. We studied three erosion affected soil types (Luvisol, eroded Luvisol, calcaric Regosol) and performed topsoil dilution in all three soils by admixing 20 % of the respective subsoil into its topsoil. N fertilizer dynamics were investigated using either mineral (calcium ammonium nitrate) or organic (biogas digestate) fertilizer, labeled with 15N. The fertilizer 15N recovery and the distribution of the fertilizer N in different soil fractions was quantified after plant maturity. Fertilizer N dynamics and utilization were influenced by all three factors investigated. 15N recovery in the plant-soil system was higher and fertilizer N utilization was lower in the treatments with diluted topsoil than in the non-diluted controls. Similarly, plants of the organic fertilizer N treatments took up significantly less fertilizer N in comparison to mineral fertilizer treatments. Both topsoil dilution and organic fertilizer application promoted 15N recovery and N accumulation in the soil fractions, with strong differences between soil types. Our study reveals an innovative insight: topsoil dilution due to soil erosion has a negligible impact on N cycling and dynamics in the plant-soil system. The crucial factors influencing these processes are found to be the choice of fertilizer form and the specific soil type. Recognizing these aspects is essential for a precise and comprehensive assessment of the environmental continuum, emphasizing the novelty of our findings.

Optimizing Clubroot Management and the Role of Canola Cultivar Mixtures.

The sustainable cultivation of canola is under threat from clubroot disease (Plasmodiophora brassicae). The pathogen's resting spores can survive in the soil for extended periods, complicating disease management. Therefore, effective clubroot control requires a combination of tactics that provide multiple layers of protection. Management strategies have focused on pathogen avoidance and reducing disease levels in infested fields. The sanitation of machinery and field equipment remains the most effective method for preventing the pathogen's introduction into non-infested fields. For disease reduction, crop rotation, liming, chemical control, and host resistance are commonly employed, with the use of clubroot-resistant cultivars being the most effective to date. However, resistance breakdown has been observed within four years of the introduction of new cultivars, jeopardizing the long-term effectiveness of this approach. A promising yet underexplored strategy is the use of cultivar mixtures. This approach leverages mechanisms such as the dilution effect, the barrier effect, induced resistance, disruptive selection, and the compensatory effect to control the disease. Cultivar mixtures have the potential to reduce the impact of clubroot on canola production while preserving pathogen population structure, thereby minimizing the likelihood of resistance breakdown. Given its potential, further research into cultivar mixtures as a management strategy for clubroot disease is warranted.

Brassicaceae Mustards: Phytochemical Constituents, Pharmacological Effects, and Mechanisms of Action against Human Disease.

The Brassicaceae genus consists of many economically important mustards of value for food and medicinal purposes, namely Asian mustard (Brassica juncea), ball mustard (Neslia paniculata), black mustard (B. nigra), garlic mustard (Alliaria petiolata), hedge mustard (Sisymbrium officinale), Asian hedge mustard (S. orientale), oilseed rape (B. napus), rapeseed (B. rapa), treacle mustard (Erysimum repandum), smooth mustard (S. erysimoides), white ball mustard (Calepina irregularis), white mustard (Sinapis alba), and Canola. Some of these are commercially cultivated as oilseeds to meet the global demand for a healthy plant-derived oil, high in polyunsaturated fats, i.e., B. napus and B. juncea. Other species are foraged from the wild where they grow on roadsides and as a weed of arable land, i.e., E. repandum and S. erysimoides, and harvested for medicinal uses. These plants contain a diverse range of bioactive natural products including sulfur-containing glucosinolates and other potentially valuable compounds, namely omega-3-fatty acids, terpenoids, phenylpropanoids, flavonoids, tannins, S-methyl cysteine sulfoxide, and trace-elements. Various parts of these plants and many of the molecules that are produced throughout the plant have been used in traditional medicines and more recently in the mainstream pharmaceutical and food industries. This study relates the uses of mustards in traditional medicines with their bioactive molecules and possible mechanisms of action and provides an overview of the current knowledge of Brassicaceae oilseeds and mustards, their phytochemicals, and their biological activities.

Effects of protein and forage source on performance, and splanchnic and mammary net fluxes of nutrients in lactating dairy cows.

This study was conducted to determine if the decreased MP supply predicted by the NRC (2001) when canola meal (CM) substitutes soybean meal (SBM) was supported by direct measurement of net portal absorption of AA or energy-yielding nutrients, plus the impact of the type of forage in CM-based rations. Nine Holstein cows with indwelling catheters in splanchnic blood vessels, 8 also with a ruminal cannula were used to examine the effects of protein source in corn silage-based diets, comparing SBM versus CM, and forage source in CM-based diets, comparing corn versus grass silage. The cows were allocated to a triple 3 × 3 Latin square design with 21-d periods. The 3 experimental diets, formulated to be isoenergetic and isonitrogenous, were based on: 1) SBM and corn silage (SoyCorn); 2) CM and corn silage (CanCorn) and 3) CM and cool-season grass silage (CanGrass). Averages of intake, milk yield and milk composition of the last 3 d of each period were used for statistical analyses. On d 21 of each period, 6 sets of arterial, portal, hepatic and mammary blood samples and 2 ruminal fluid samples were collected. On d 12 of period 2, the protein sources were incubated in nylon bags to determine 16h-ruminal disappearance of DM and N and to obtain 16-h residues. Finally, 5 d after the completion of the Latin square design, the mobile bag technique was used to determine DM and N intestinal disappearance of the 16-h residues of SBM and CM. Pre-planned contrasts were used to compare the effect of the protein source in cows fed corn silage, i.e., SoyCorn versus CanCorn, and the effect of forage in cows fed CM, i.e., CanCorn versus CanGrass. Data of the cow without a rumen canula could not be used because of health problem. In corn silage-based diets, substitution of SBM by CM tended to increase milk (6%) and milk fat (7%) yields. The 8% higher ruminal N disappearance and the 19% decreased MP supply from RUP predicted by NRC (2001) were not supported by the 25% decrease in ruminal ammonia concentration, similar net portal absorption of AA (except 22% higher for Met), and the 14% decrease in urea hepatic removal when CM substituted SBM. Ruminal incubation of CM in nylon bags does not appear suitable for adequate determination of the rumen by-pass of a protein source like CM. Inclusion of grass silage rather than corn silage in CM-based diets tended to increase milk (6%) and increased milk lactose (8%) yields. Neither protein nor forage source resulted in variations of metabolism of energy-yielding nutrients that could explain observed increments in cow performance. The present study indicates no decreased AA availability when CM substitutes SBM. Therefore, substitution of SBM by CM in diets based on corn silage and CM in corn- or grass silage-diets can be used successfully in high producing dairy cows.

The Effect of a Nutritional Intervention with the Use of Biofortified Beef Meat on Selected Biochemical Parameters in Blood from Older Adults.

This study aimed to investigate the effects of meat biofortified with antioxidants and canola oil on the health of older adults through blood parameters. Eighty institutionalized older persons were divided into four groups who received the following treatments: C-control meat with 46 µg/kg of meat with selenium, 3.80 g/kg of meat with vitamin E and 0.78 g/100 g of meat with conjugated linoleic acid (CLA); A-antioxidant meat with 422 µg/kg of meat with selenium, 7.65 g/kg of meat with vitamin E and 0.85 g/100 g of meat with CLA; O-oil meat with 57 µg/kg of meat with selenium, 3.98 g/kg of meat with vitamin E and 1.27 g/100 g of meat with CLA; OA-oil and antioxidant meat with 367 µg/kg of meat with selenium, 7.78 g/kg of meat with vitamin E and 1.08 g/100 g of meat with CLA. Blood samples were collected at 0, 45 and 90 days after the start of meat intake. Older adults who consumed ANT (A and AO) meat had higher concentrations of selenium (p = 0.039), vitamin E and HDL (higher concentrations of high-density lipoprotein, p = 0.048) in their blood. This study demonstrates that the consumption of Se- and vitamin E-biofortified meat increases the concentration of these metabolites in blood from older adults.

Characterizing the role of endocarp a and b cells layers during pod (silique) development in Brassicaceae.

The process of silique dehiscence is essential for the proper dispersal of seeds at the end of a dehiscent fruit plants lifecycle. Current research focuses on genetic manipulation to mitigate this process and enhance shatter tolerance in crop plants, which has significant economic implications. In this study, we have conducted a time-course analysis of cell patterning and development in valve tissues of Arabidopsis thaliana and closely related Triangle of U species (Brassica juncea, Brassica carinata, Brassica napus, Brassica rapa, and Brassica nigra) from Brassicaceae. The goal was to decipher the detailed temporal developmental patterns of the endocarp a and b cell layers of the valve, specifically their degradation and lignification respectively. Additionally, we propose a new classification system for the lignification of the endocarp a cell layer: L1 indicates the cell closest to the replum, with L2 and L3 representing the second and third cells, respectively, each numerical increment indicating lignified cells farther from the replum. Our findings provide a foundational framework absent in current literature, serving as an effective blueprint for future genomic work aimed at modifying valve structures to enhance agronomic traits, such as reducing fiber (lignin) or increasing shatter tolerance.

Incorporation of canola meal as a sustainable natural filler in PLA foams.

The canola oil industry generates significant waste as canola meal (CM) which has limited scope and applications. This study demonstrates the possibility of valorization of CM as a sustainable natural filler in a biodegradable polymer composite of Poly(lactic acid) (PLA). Generally, interfacial bonding between natural fibers and the polymer matrix in the composite is weak and non-uniform. One possible solution is to derivatize natural fibre to introduce interfacial bond strength and compatibility with the PLA polymer matrix. Here, CM was succinylated in a reactive extrusion process using succinic anhydride at 30 wt% to get 14% derivatization with 0.02 g of -COOH density per g of CM. The CM or succinylated CM at 5 and 15 wt% was co-extruded with amorphous PLA to get composite fibers. CM-PLA and succinylated CM-PLA biocomposites were foamed using a mild and green microcellular foaming process, with CO2 as an impregnating agent without any addition of organic solvents. The properties of the foams were analyzed using differential scanning calorimetry (DSC), Dynamic mechanical thermal analysis (DMTA), shrinkage, and imaging. The addition of CM or succinylated CM as a natural filler did not significantly change the glass transition temperature, melting point, percent crystallization, stiffness, and thermal stability of PLA foams. This suggests succinylation (modification) of CM is not a mandatory step for improving interphase compatibility with the amorphous PLA. The new PLA-CM foams can be a good alternative in the packaging industry replacing the existing petroleum-based polymer foams.

Telomere-to-telomere Genome Assembly of the Clubroot Pathogen Plasmodiophora Brassicae.

Plasmodiophora brassicae (Woronin, 1877), a biotrophic, obligate parasite, is the causal agent of clubroot disease in brassicas. The clubroot pathogen has been reported in more than 80 countries worldwide, causing economic losses of hundreds of millions every year. Despite its widespread impact, very little is known about the molecular strategies it employs to induce the characteristic clubs in the roots of susceptible hosts during infection, nor about the mechanisms it uses to overcome genetic resistance. Here, we provide the first telomere-to-telomere complete genome of P. brassicae. We generated ∼27 Gb of Illumina, Oxford Nanopore, and PacBio HiFi data from resting spores of strain Pb3A and produced a 25.3 Mb assembly comprising 20 chromosomes, with an N50 of 1.37 Mb. The BUSCO score, the highest reported for any member of the group Rhizaria (Eukaryota: 88.2%), highlights the limitations within the Eukaryota database for members of this lineage. Using available transcriptomic data and protein evidence, we annotated the Pb3A genome, identifying 10,521 protein-coding gene models. This high-quality, complete genome of P. brassicae will serve as a crucial resource for the plant pathology community to advance the much-needed understanding of the evolution of the clubroot pathogen.

Enhancing germination and growth of canola (Brassica napus L.) through hydropriming and NaCl priming.

The excessive accumulation of sodium chloride (NaCl) in soil can result in soil salinity, which poses a significant challenge to plant growth and crop production due to impaired water and nutrient uptake. On the other hand, hydropriming (WP) and low level of NaCl priming can improve the germination of seeds, chlorophyll contents, oil and seed yield in plants. That's why this study investigates the impact of hydro and different levels of NaCl (0.5, 1.0, 1.5 and 2.0%) priming, as pre-treatment techniques on canola seeds germination, growth and yield of two varieties Punjab and Faisal Canola. Results showed that, WP performed significant best for increase in germination (~ 20 and ~ 22%) and shoot length (~ 6 and ~ 10%) over non-priming (NP) in Punjab Canola and Faisal Canola respectively. A significant increase in plant height (~ 6 and ~ 7%), root length (~ 1 and ~ 7%), shoot fresh weight (~ 5 and ~ 7%), root fresh weight (~ 6 and ~ 7%) in Punjab Canola and Faisal Canola respectively. It was also observed that plants under WP and 0.5%NaCl priming were also better in production of seed yield per plant, oil contents, silique per plant, seeds per silique, and branches per plant chlorophyll contents and leaf relative water contents over NP. In conclusion, WP and 0.5%NaCl has potential to improve the germination, growth, yield and oil attributes of canola compared to non-priming, 1.0%NaCl priming, 1.5%NaCl priming and 2.0%NaCl priming.

Diversity and Pathogenicity of Fusarium Root Rot Fungi from Canola (Brassica napus) in Alberta, Canada.

Root rot disease poses a significant threat to canola (Brassica napus), underscoring the need for a comprehensive understanding of its causal agents for more effective disease mitigation. The composition and diversity of fungal pathogens associated with root rot of canola in Alberta, Canada, were evaluated from plant tissue samples collected in 2021 and 2022. The study revealed Fusarium spp. as the predominant pathogens found in almost all surveyed fields. Fusarium avenaceum, F. redolens, and F. solani were among the most frequently recovered species. Greenhouse trials confirmed their pathogenicity, with F. avenaceum and F. sporotrichioides found to be particularly aggressive. Additionally, F. sporotrichioides and F. commune were identified for the first time as canola root rot pathogens. Inoculation with isolates of most species resulted in significant reductions in seedling emergence, plant height, and shoot and root dry weights. Analysis of translation elongation factor 1-α (TEF-1α) and internal transcribed spacer (ITS) sequences confirmed the identity of the Fusarium spp., while concatenating the ITS and TEF-1α sequences enabled improved species differentiation. Geographic and year effects did not influence fungal diversity or aggressiveness, as determined by principal component analysis. This study emphasized the high diversity and impact of Fusarium spp. in causing canola root rot.

Resilience of Canola to Plasmodiophora brassicae (Clubroot) Pathotype 3H under Different Resistance Genes and Initial Inoculum Levels.

In this study, we explored the resilience of a clubroot resistance (CR) stacking model against a field population of Plasmodiophora brassicae pathotype 3H. This contrasts with our earlier work, where stacking CRaM and Crr1rutb proved only moderately resistant to pathotype X. Canola varieties carrying Rcr1/Crr1rutb and Rcr1 + Crr1rutb were repeatedly exposed to 3H at low (1 × 104/g soil) and high (1 × 107/g soil) initial resting spore concentrations over five planting cycles under controlled environments to mimic intensive canola production. Initially, all resistant varieties showed strong resistance. However, there was a gradual decline in resistance over time for varieties carrying only a single CR gene, particularly with Crr1rutb alone and at the high inoculum level, where the disease severity index (DSI) increased from 9% to 39% over five planting cycles. This suggests the presence of virulent pathotypes at initially low levels in the 3H inoculum. In contrast, the variety with stacked CR genes remained resilient, with DSI staying below 3% throughout, even at the high inoculum level. Furthermore, the use of resistant varieties, carrying either a single or stacked CR genes, reduced the total resting spore numbers in soil over time, while the inoculum level either increased or remained high in soils where susceptible Westar was continuously grown. Our study demonstrates greater resistance resilience for stacking Rcr1 and Crr1rutb against the field population of 3H. Additionally, the results suggest that resistance may persist even longer in fields with lower levels of inoculum, highlighting the value of extended crop rotation (reducing inoculum) alongside strategic CR-gene deployment to maximize resistance resilience.

Feeding a Multi-Enzyme Blend to Enhance the Nutrient Digestibility of Wheat-Canola Expeller Diets in Ileal-Cannulated Weaned Pigs.

Canola expeller (CE) contains ~200 g/kg residual oil, but also fiber that impairs nutrient digestibility in weaned pigs. To study if feed enzymes increase digestibility, six diets containing either the basal or two CE samples mixed in at 250 g/kg (CE-A or CE-B) were formulated with or without a multi-enzyme blend containing cellulase, xylanase, glucanase, amylase, protease, invertase, and pectinase. The basal diet containing 620 g/kg wheat and 150 g/kg barley served as control. Twelve ileal-cannulated barrows (9-15 kg) were fed the six diets in a replicated 6 (pigs) × 3 (periods) Youden square. Ileal digestibility of gross energy and amino acids was 5% greater for basal than CE diets without differences between CE samples. Diet energy values were 4% greater for CE than basal diets due to residual oil in CE. Inclusion of the multi-enzyme blend increased total tract digestibility of energy of the basal but not CE diets by 2%. Net energy value was greater for CE-A than CE-B because CE-A contained more residual oil. In conclusion, feeding 250 g/kg CE increased diet energy values; thus, CE can substitute added fat in weaned pig diets. Feeding the multi-enzyme blend increased the energy digestibility of wheat and barley-based diets fed to weaned pigs. However, research is needed to identify enzyme combinations that increase the nutrient digestibility of CE.

Alleviating salinity stress in canola (Brassica napus L.) through exogenous application of salicylic acid.

Canola, a vital oilseed crop, is grown globally for food and biodiesel. With the enormous demand for growing various crops, the utilization of agriculturally marginal lands is emerging as an attractive alternative, including brackish-saline transitional lands. Salinity is a major abiotic stress limiting growth and productivity of most crops, and causing food insecurity. Salicylic acid (SA), a small-molecule phenolic compound, is an essential plant defense phytohormone that promotes immunity against pathogens. Recently, several studies have reported that SA was able to improve plant resilience to withstand high salinity. For this purpose, a pot experiment was carried out to ameliorate the negative effects of sodium chloride (NaCl) on canola plants through foliar application of SA. Two canola varieties Faisal (V1) and Super (V2) were assessed for their growth performance during exposure to high salinity i.e. 0 mM NaCl (control) and 200 mM NaCl. Three levels of SA (0, 10, and 20 mM) were applied through foliar spray. The experimental design used for this study was completely randomized design (CRD) with three replicates. The salt stress reduced the shoot and root fresh weights up to 50.3% and 47% respectively. In addition, foliar chlorophyll a and b contents decreased up to 61-65%. Meanwhile, SA treatment diminished the negative effects of salinity and enhanced the shoot fresh weight (49.5%), root dry weight (70%), chl. a (36%) and chl. b (67%). Plants treated with SA showed an increased levels of both enzymatic i.e. (superoxide dismutase (27%), peroxidase (16%) and catalase (34%)) and non-enzymatic antioxidants i.e. total soluble protein (20%), total soluble sugar (17%), total phenolic (22%) flavonoids (19%), anthocyanin (23%), and endogenous ascorbic acid (23%). Application of SA also increased the levels of osmolytes i.e. glycine betaine (31%) and total free proline (24%). Salinity increased the concentration of Na+ ions and concomitantly decreased the K+ and Ca2+ absorption in canola plants. Overall, the foliar treatments of SA were quite effective in reducing the negative effects of salinity. By comparing both varieties of canola, it was observed that variety V2 (Super) grew better than variety V1 (Faisal). Interestingly, 20 mM foliar application of SA proved to be effective in ameliorating the negative effects of high salinity in canola plants.

Promising New Methods Based on the SOD Enzyme and SAUR36 Gene to Screen for Canola Materials with Heavy Metal Resistance.

Canola is the largest self-produced vegetable oil source in China, although excessive levels of cadmium, lead, and arsenic seriously affect its yield. Therefore, developing methods to identify canola materials with good heavy metal tolerance is a hot topic for canola breeding. In this study, canola near-isogenic lines with different oil contents (F338 (40.62%) and F335 (46.68%) as the control) and heavy metal tolerances were used as raw materials. In an experiment with 100 times the safe standard values, the superoxide dismutase (SOD) and peroxidase (POD) activities of F335 were 32.02 mmol/mg and 71.84 mmol/mg, while the activities of F338 were 24.85 mmol/mg and 63.86 mmol/mg, exhibiting significant differences. The DEGs and DAPs in the MAPK signaling pathway of the plant hormone signal transduction pathway and other related pathways were analyzed and verified using RT-qPCR. SAUR36 and SAUR32 were identified as the key differential genes. The expression of the SAUR36 gene in canola materials planted in the experimental field was significantly higher than in the control, and FY958 exhibited the largest difference (27.82 times). In this study, SOD and SAUR36 were found to be closely related to heavy metal stress tolerance. Therefore, they may be used to screen for new canola materials with good heavy metal stress tolerance for canola breeding.

Electroactive polylactic acid nanofiber multilayer membranes as "Green" flexible electrode for supercapacitor.

Against the backdrop of the post-COVID-19 era, the demand for masks has become increasingly steady, discarded masks have brought about new environmental problems due to the lack of effective means of disposal as well as recycling mechanisms. To solve this problem, we make secondary use of discarded polylactic acid (PLA) masks. The nanofiber multilayer membranes PLA/PDA/GO/PPy were synthesized by layer-by-layer self-assembly for flexible supercapacitors (SCs). The multiple coating on PLA significantly increases the capacitive performance. Optimization of the PLA/PDA/GO/PPy demonstrates capacitance up to 1331 mF cm-2. Symmetric aqueous SCs using PLA/PDA/GO/PPy electrodes show higher energy density than other literature-reported SCs based on nanofiber multilayer membranes. In addition, we also explored the effects of discarded PLA/PDA/GO/PPy on the growth of ryegrass and canola in the soil. The exceptional combination of remarkable electrochemical properties and excellent environmental friendliness makes the PLA membrane promising for supercapacitors.

Human Sensory, Taste Receptor, and Quantitation Studies on Kaempferol Glycosides Derived from Rapeseed/Canola Protein Isolates.

Beyond the key bitter compound kaempferol 3-O-(2‴-O-sinapoyl-ß-d-sophoroside) previously described in the literature (1), eight further bitter and astringent-tasting kaempferol glucosides (2-9) have been identified in rapeseed protein isolates (Brassica napus L.). The bitterness and astringency of these taste-active substances have been described with taste threshold concentrations ranging from 3.3 to 531.7 and 0.3 to 66.4 µmol/L, respectively, as determined by human sensory experiments. In this study, the impact of 1 and kaempferol 3-O-ß-d-glucopyranoside (8) on TAS2R-linked proton secretion by HGT-1 cells was analyzed by quantification of the intracellular proton index. mRNA levels of bitter receptors TAS2R3, 4, 5, 13, 30, 31, 39, 40, 43, 45, 46, 50 and TAS2R8 were increased after treatment with compounds 1 and 8. Using quantitative UHPLC-MS/MSMRM measurements, the concentrations of 1-9 were determined in rapeseed/canola seeds and their corresponding protein isolates. Depending on the sample material, compounds 1, 3, and 5-9 exceeded dose over threshold (DoT) factors above one for both bitterness and astringency in selected protein isolates. In addition, an increase in the key bitter compound 1 during industrial protein production (apart from enrichment) was observed, allowing the identification of the potential precursor of 1 to be kaempferol 3-O-(2‴-O-sinapoyl-ß-d-sophoroside)-7-O-ß-d-glucopyranoside (3). These results may contribute to the production of less bitter and astringent rapeseed protein isolates through the optimization of breeding and postharvest downstream processing.

Thiourea improves yield and quality traits of Brassica napus L. by upregulating the antioxidant defense system under high temperature stress.

High temperature stress influences plant growth, seed yield, and fatty acid contents by causing oxidative damage. This study investigated the potential of thiourea (TU) to mitigate oxidative stress and restoring seed oil content and quality in canola. The study thoroughly examined three main factors: (i) growth conditions-control and high temperature stress (35 °C); (ii) TU supplementation (1000 mg/L)-including variations like having no TU, water application at the seedling stage, TU application at seedling stage (BBCH Scale-39), water spray at anthesis stage, and TU application at anthesis stage (BBCH Scale-60); (iii) and two canola genotypes, 45S42 and Hiola-401, were studied separately. High temperature stress reduced growth and tissue water content, as plant height and relative water contents were decreased by 26 and 36% in 45S42 and 27 and 42% Hiola-401, respectively, resulting in a substantial decrease in seed yield per plant by 36 and 38% in 45S42 and Hiola-401. Seed oil content and quality parameters were also negatively affected by high temperature stress as seed oil content was reduced by 32 and 35% in 45S42 and Hiola-401. High-temperature stress increased the plant stress indicators like malondialdehyde, H2O2 content, and electrolyte leakage; these indicators were increased in both canola genotypes as compared to control. Interestingly, TU supplementation restored plant performance, enhancing height, relative water content, foliar chlorophyll (SPAD value), and seed yield per plant by 21, 15, 30, and 28% in 45S42; 19, 13, 26, and 21% in Hiola-401, respectively, under high temperature stress as compared to control. In addition, seed quality, seed oil content, linoleic acid, and linolenic acid were improved by 16, 14, and 22% in 45S42, and 16, 11, and 23% in Hiola-401, as compared to control. The most significant improvements in canola seed yield per plant were observed when TU was applied at the anthesis stage. Additionally, the research highlighted that canola genotype 45S42 responded better to TU applications and exhibited greater resilience against high temperature stress compared to genotype Hiola-401. This interesting study revealed that TU supplementation, particularly at the anthesis stage, improved high temperature stress tolerance, seed oil content, and fatty acid profile in two canola genotypes.