Class II Correction and Crowding Treatment Using In-House Direct Printed Clear Aligners: A Literature Review and Case Report.

Clear aligner therapy has significantly improved orthodontic treatment by offering patients a more aesthetically pleasing option compared to traditional braces. This literature review and case report specifically focus on the effectiveness of directly printed clear aligners in treating Class II malocclusions and crowding. Class II malocclusions are characterized by excessive overjet, which often results from skeletal or dental discrepancies between the upper and lower jaws. Crowding refers to the lack of space for teeth within the dental arch, leading to misalignment and potential functional issues. The review and case report highlight the increasing importance of directly printed clear aligners in modern orthodontics and provide clinicians with a valuable tool to effectively address complex malocclusions and crowding while also meeting patient needs for discretion and comfort. Further research is necessary to validate the long-term stability and outcomes of directly printed clear aligner therapy in various orthodontic cases. A detailed case report demonstrates the successful treatment of a patient with Class II malocclusion and mild crowding using directly printed clear aligners. Treatment outcomes include improvements in dental alignment, occlusion, and facial aesthetics, showcasing the effectiveness of this innovative approach.

Adolescent Patient's Perceptions During Treatment With Class II Elastics.

The article presents a case of a 13-year-old adolescent male patient who started orthodontic treatment at the age of 12. Before treatment, he was diagnosed with narrow maxilla, proclination of upper incisors, deep overbite, distal occlusion bilaterally with significant sagittal overjet in frontal area, skeletal Class II, and hypodivergent growth pattern. During treatment, the patient is in his pubertal growth spurt. About 2 months after intermaxillary Class II elastics (1/4 heavy, 6.5 Oz) were applied, he complained of pain during mastication, wide opening of the mouth, and sometimes during protrusive and lateral movements in the right TMJ. The TMJ X-ray examination did not reveal abnormal morphological changes. Occlusion was evaluated by an electromyographic device, Teethan. The result was typical for Class II malocclusion. During the bilateral palpation of the zones of TMJ and opening of the mouth and chewing, the patient reported pain on the right side. There was no clicking in the joint. The elastic wear was stopped, and soon afterwards, the pain disappeared. These complaints point to a possible relationship between orthodontic treatment and TMJ pain. However, the disappearance of complaints after the removal of the Class II elastics points that the temporomandibular joint disorder (TMD) symptoms are reversible and resolved.

Evaluation of Buccolingual Inclinations of First Molars Among Different Vertical Facial Patterns in Class II Division I Subjects.

Background Knowing the characteristics of vertical patterns is crucial to provide the best orthodontic treatment. Cone beam computed tomography (CBCT) offers a valuable tool for evaluating true buccolingual inclinations. The current study investigates the buccolingual inclination of first molars in adult subjects with different vertical facial patterns. Methods CBCT scans of 66 adult patients (31 males, 35 females) with a mean age of 31.6 years (SD: 6.4 years) exhibiting skeletal class II division I maxillomandibular relationships were employed. Participants were categorized into three groups based on linear and angular measurements: normodivergent group (n=22), hypodivergent group (n=22), and hyperdivergent group (n=22). The independent samples t-test and Mann-Whitney U-test were conducted to investigate statistical differences in terms of buccolingual inclination between the three vertical patterns. Results Statistically significant differences were observed in the buccolingual inclinations of both maxillary and mandibular first molars in the hypodivergent group compared to the other groups (p<0.05). Conclusions In patients with class II division I sagittal relationships, the buccolingual inclinations of the first molars exhibit similarities between normodivergent and hyperdivergent groups. However, these inclinations differ significantly in hypodivergent adult subjects.

Cone-Beam Computed Tomography Study of Incisive Canal and Maxillary Central Incisors in Dravidian Population.

INTRODUCTION:  En-masse maxillary anterior retraction is necessary to attain an esthetic profile in Angle's class I bimaxillary dentoalveolar protrusion and Angle's class II division 1 malocclusion. The objective of this study was to evaluate configurational relationships between maxillary incisors and incisive canal in Angle's class I bialveolar protrusion and Angle's class II division 1 malocclusion by cone-beam computed tomography (CBCT). METHODS: A total of 108 adult CBCT scans of 54-skeletal class I bialveolar protrusion and 54-skeletal class II division 1 malocclusions were retrospectively analyzed. Angles between palatal plane and axis of maxillary alveolar border (θ1), incisive canal (θ2), and maxillary right central incisor (θ3) were measured in relation to the midsagittal plane. Linear measurements such as incisive canal width (IC-IC), medial inter-root distance (Rm-Rm), posterior inter-root distance (Rp-Rp), anteroposterior distance from Rm to tangent of right central incisor (11 Rm-Cat), and left central incisor (21 Rm-Cat) corresponding to three vertical levels (L1, L2, and L3) were assessed in axial cross-sectional plane. Association among angular measurements was examined by Spearman correlation coefficient analysis. Mann-Whitney U test compared variables of linear measurements at three vertical levels. RESULTS:  Estimated distance from incisor root to incisive canal was 5-6 mm in both groups slightly influenced by skeletal class and vertical levels but not gender. Mann-Whitney test demonstrated significant differences between groups at three vertical levels (p<0.05). Only θ2 revealed a significant difference (p<0.05) between malocclusions compared to θ1 and θ3. The angular measurements for both malocclusions were positively correlated (p<0.05). CONCLUSION:  Sagittal root-canal cortical plate distance varied significantly in both malocclusions (5-6 mm). Inter-root distance (Rp-Rp) was greater than incisive canal width (IC-IC) at all three vertical levels indicating a reduced possibility of canal invasion after maximum retraction at posterior levels.

Comparison of linear distance of glenoid fossa to frontomaxillary nasal suture in skeletal Class-II and skeletal Class-I malocclusion.

Objective: To compare linear distance of glenoid fossa to frontomaxillary nasal suture in skeletal Class-I and II malocclusions. Methods: This cross-sectional study was conducted at the Department of Orthodontics, Altamash Institute of Dental Medicine, Karachi Pakistan. The duration of study was one year from January, 2019 to January, 2020. After taking informed consent from patient and hospital ethical committee a total of 60 patients were included in the study using WHO sample size calculator. Two groups comprising 30 patients each i.e., Skeletal Class-I malocclusion and Skeletal Class-II malocclusion with mandibular retrusion both having normal vertical relationship were included in the study. The cephalometric measurements SNA, SNB, SNMP, FHMP, GF-FMN, CO-GO, CO GN on lateral cephalograms were measured and compared between the two groups. Independent t test was applied and p value ≤ 0.05 was considered as significant. Results: In skeletal Class-I malocclusion the mean linear distance of GF-FMN was 70.2 ± 4.02 mm and in skeletal Class-II malocclusion it was 73.4 ± 4.04 mm (p value .004). Glenoid fossa was 3.2 mm distally placed in patients with Class-II malocclusion. Conclusion: Glenoid fossa position is a diagnostic feature of Class-II malocclusion associated with mandibular retrusion. One of the effective cephalometric measurements to check glenoid fossa position is the distance from the glenoid fossa(GF) to the frontomaxillary nasal suture FMN (GF-FMN).

Smile Renewal: Incisor Restoration Using the Strip Crown Technique.

Aesthetics has been an important aspect of dentistry along with functionality for decades but its significance is at an all-time high. Hence among techniques that contribute toward this goal, strip crown has shown convincing results. However, its acceptance did not reach its potential, especially among general dentists which could be attributed to its technique-sensitive nature. This case report sheds light on the practicality and reliability of this technique along with various modifications made by authors while striving to improve the quality of treatment provided by the clinician.

Factors influencing young patient arrival date at the orthodontic office: a study of 456 cases / Facteurs influençant la date d'arrivée du jeune patient au cabinet d'orthodontie : une étude sur 456 cas.

Introduction: The arrival date young patient's first orthodontic consultation is unrestricted but may influence the choice of treatment plan as well as its modalities. The objective of this study was to determine the factors that influence the date of the first consultation at the orthodontic office: advice from a third party or a health professional, the patient's gender, the socioeconomic level, the actual need for orthodontic treatment, and the vertical and anteroposterior skeletal dysmorphia. Materials and Methods: Young patient's file younger than 16 years were systematically included. A Wilcoxon and Kruskal-Wallis test was performed in univariate and multivariate analysis. The threshold was 5%. Results: 456 young patients were included. Anteroposterior skeletal discrepancy, referral by an acquaintance, and socioeconomic level appeared to be factors influencing patient arrival date. Gender, actual need for orthodontic treatment, referral from a health professional, and vertical skeletal discrepancy did not influence the arrival date at the office. Discussion: The date of consultation is not related to the actual orthodontic treatment need. Word-of-mouth seems to play an important role. Patients seem to relate an anteroposterior discrepancy to the need to consult an orthodontist, but do not relate it to vertical discrepancy, although ventilation may be related to severe dysmorphia. Conclusion: This study encourages more communication about orthodontic treatment indications with patients and caregivers.

Introduction: La date d'arrivée du jeune patient en première consultation orthodontique est libre mais peut influencer le choix du plan de traitement, ainsi que ses modalités. L'objectif de cette étude était de déterminer les facteurs qui influencent la date de première consultation au cabinet d'orthodontie : le conseil d'un tiers ou d'un professionnel de santé, le genre du patient, le niveau socio-économique, le besoin réel de traitement orthodontique, la dysmorphie squelettique verticale et antéro-postérieure. Matériels et méthodes: Les dossiers de jeunes patients de moins de 16 ans ont été systématiquement inclus. Un test de Wilcoxon et Kruskal-Wallis a été effectué en analyse univariée et multivariée. Le seuil retenu était de 5 %. Résultats: Au total, 456 patients ont été inclus. Le décalage squelettique antéro-postérieur, le fait d'être adressé par une connaissance et le niveau socio-économique semblent être des facteurs influençant la date d'arrivée du jeune patient. Le genre, le besoin réel de traitement orthodontique, le fait d'être adressé par un professionnel de santé, le décalage squelettique vertical n'ont pas d'influence sur la date d'arrivée au cabinet. Discussion: La date de consultation n'est pas liée au besoin réel de traitement. Le bouche à oreille semble jouer un rôle important. Les patients semblent faire le lien entre un décalage antéro-postérieur et la nécessité de consulter un orthodontiste, mais ne le font pas pour le décalage vertical alors que la ventilation peut être liée à des dysmorphies sévères. Conclusion: Cette étude encourage à communiquer davantage sur les indications de traitement orthodontique avec les patients et les soignants.

HLA-DM and HLA-DO interplay for the peptide editing of HLA class II in healthy tissues and leukemia.

HLA class II antigen presentation is modulated by the activity of the peptide editor HLA-DM and its antagonist HLA-DO, with their interplay controlling the peptide repertoires presented by normal and malignant cells. The role of these molecules in allogeneic hematopoietic cell transplantation (alloHCT) is poorly investigated. Balanced expression of HLA-DM and HLA-DO can influence the presentation of leukemia-associated antigens and peptides targeted by alloreactive T cells, therefore affecting both anti-leukemia immunity and the potential onset of Graft versus Host Disease. We leveraged on a large collection of bulk and single cell RNA sequencing data, available at different repositories, to comprehensively review the level and distribution of HLA-DM and HLA-DO in different cell types and tissues of the human body. The resulting expression atlas will help future investigations aiming to dissect the dual role of HLA class II peptide editing in alloHCT, and their potential impact on its clinical outcome.

Dissolution profiles of BCS class II drugs generated by the gastrointestinal simulator alpha has an edge over the compendial USP II method.

The poor water solubility of orally administered drugs leads to low dissolution in the GI tract, resulting to low oral bioavailability. Traditionally, in vitro dissolution testing using the compendial dissolution apparatuses I and II has been the gold-standard method for evaluating drug dissolution and assuring drug quality. However, these methods don't accurately represent the complex physiologies of the GI tract, making it difficult to predict in vivo behavior of these drugs. In this study, the in vivo predictive method, gastrointestinal simulator alpha (GIS-α), was used to study the dissolution profiles of commercially available BCS Class II drugs, danazol, fenofibrate, celecoxib, and ritonavir. This biorelevant transfer method utilizes multiple compartments alongside peristaltic pumps, to effectively model the transfer of material in the GI tract. In all cases, the GIS-α with biorelevant buffers gave superior dissolution profiles. In silico modeling using GastroPlusTM yielded better prediction when utilizing the results from the GIS-α as input compared to the dissolution profiles obtained from the USP II apparatus. This gives the GIS-α an edge over compendial methods in generating drug dissolution profiles and is especially useful in the early stages of drug and formulation development. This information gives insight into the dissolution behavior and potential absorption patterns of these drugs which can be crucial for formulation development, as it allows for the optimization of drug delivery systems to enhance solubility, dissolution, and ultimately, bioavailability.

Interchain Disulfide Engineering Enables Efficient Production of Functional HLA-DQ-Fc Fusion Proteins.

HLA-DQ molecules drive unwanted alloimmune responses after solid-organ transplants and several autoimmune diseases, including Type1 Diabetes and celiac disease. Biologics with HLA molecules as part of the design are emerging therapeutic options for these allo- and autoimmune conditions. However, the soluble α and ß chains of class II HLA molecules do not dimerize efficiently without their transmembrane domains, which hinders their production. In this study, we examined the feasibility of inter-chain disulfide engineering by introducing paired cysteines to juxtaposed positions in the α and ß chains of HLA-DQ7, encoded by HLA-DQA1*05:01 and HLA-DQB1*03:01 respectively. We identified three variant peptide-HLA-DQ7-Fc fusion proteins (DQ7Fc) with increased expression and production yield, namely Y19C-D6C (YCDC), A83C-E5C (ACEC), and A84C-N33C (ACNC). The mutated residues were conserved across all HLA-DQ proteins and had limited solvent exposure. Further characterizations of the YCDC variant showed that the expression of the fusion protein is peptide-dependent; inclusion of a higher-affinity peptide correlated with increased protein expression. However, high-affinity peptide alone was insufficient for stabilizing the DQ7 complex without the engineered disulfide bond. Multiple DQ7Fc variants demonstrated expected binding characteristics with commercial anti-DQ antibodies in two immunoassays and by a cell-based assay. Lastly, DQ7Fc variants demonstrated dose-dependent killing of DQ7-specific B cell hybridomas in a flow cytometric, complement-dependent cytotoxicity assay. These data support inter-chain disulfide engineering as a novel approach to efficiently producing functional HLA-DQ molecules and potentially other class II HLA molecules as candidate therapeutic agents.

Intranasal Multiepitope PD-L1-siRNA-Based Nanovaccine: The Next-Gen COVID-19 Immunotherapy.

The first approved vaccines for human use against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are nanotechnology-based. Although they are modular, rapidly produced, and can reduce disease severity, the currently available vaccines are restricted in preventing infection, stressing the global demand for novel preventive vaccine technologies. Bearing this in mind, we set out to develop a flexible nanovaccine platform for nasal administration to induce mucosal immunity, which is fundamental for optimal protection against respiratory virus infection. The next-generation multiepitope nanovaccines co-deliver immunogenic peptides, selected by an immunoinformatic workflow, along with adjuvants and regulators of the PD-L1 expression. As a case study, we focused on SARS-CoV-2 peptides as relevant antigens to validate the approach. This platform can evoke both local and systemic cellular- and humoral-specific responses against SARS-CoV-2. This led to the secretion of immunoglobulin A (IgA), capable of neutralizing SARS-CoV-2, including variants of concern, following a heterologous immunization strategy. Considering the limitations of the required cold chain distribution for current nanotechnology-based vaccines, it is shown that the lyophilized nanovaccine is stable for long-term at room temperature and retains its in vivo efficacy upon reconstitution. This makes it particularly relevant for developing countries and offers a modular system adaptable to future viral threats.

Gluten dependent activation of CD4+ T cells by MHC class II-expressing epithelium.

BACKGROUND AND AIMS: Intestinal epithelial cell (IEC) damage is a hallmark of celiac disease (CeD); however, its role in gluten-dependent T-cell activation is unknown. We investigated IEC-gluten-T cell interactions in organoid monolayers expressing human MHC class II (HLA-DQ2.5), which facilitates gluten antigen recognition by CD4+ T cells in CeD. METHODS: Epithelial MHC class II (MHCII) was determined in active and treated CeD, and in non-immunized and gluten-immunized DR3-DQ2.5 transgenic mice, lacking mouse MHCII molecules. Organoid monolayers from DR3-DQ2.5 mice were treated with or without IFN-γ, and MHCII expression was evaluated by flow cytometry. Organoid monolayers and CD4+ T cell co-cultures were incubated with gluten, pre-digested, or not by elastase-producing Pseudomonas aeruginosa or its lasB mutant. T cell function was assessed based on proliferation, expression of activation markers, and cytokine release in the co-culture supernatants. RESULTS: Active CeD patients and gluten-immunized DR3-DQ2.5 mice demonstrated epithelial MHCII expression. Organoid monolayers derived from gluten-immunized DR3-DQ2.5 mice expressed MHCII, which was upregulated by IFN-γ. In organoid monolayer-T cell co-cultures, gluten increased the proliferation of CD4+ T cells, expression of T cell activation markers, and the release of IL-2, IFN-γ, and IL-15 in co-culture supernatants. Gluten metabolized by P. aeruginosa, but not the lasB mutant, enhanced CD4+ T cell proliferation and activation. CONCLUSIONS: Gluten antigens are efficiently presented by MHCII-expressing IECs, resulting in the activation of gluten-specific CD4+ T cells, which is enhanced by gluten pre-digestion with microbial elastase. Therapeutics directed at IECs may offer a novel approach for modulating both adaptive and innate immunity in CeD patients.

The effect of different functional appliances on the sagittal pharyngeal airway dimension in skeletal class II: a retrospective study.

The aim of this study was to compare the changes in the sagittal pharyngeal airway dimension (SPAD) in adolescents with Class II mandibular retrusion treated with Invisalign Mandibular Advancement (IMA), prefabricated Myobrace (MB), and Twin block (TB). For this retrospective study, the pre-treatment and post-treatment lateral cephalograms of 60 patients who underwent myofunctional treatment, using either one of the tested appliances were gathered from the files of treated patients. Changes in the SPAD were measured in each group, and comparisons were carried out between the three study groups. Additionally, sagittal skeletal measurements were carried out. Comparisons of the study variables at T0 and T1 between the three groups were performed using one-way ANOVA, while comparisons of the difference (T1-T0) were performed using Kruskal Wallis test. A significant SPAD increase has been reported using the three tested appliances (p < 0.05), with the least change documented with MB use (p < 0.05). Significant antero-posterior improvements have been found with IMA, MB, and TB with an increase in the SNB°, and a decrease in ANB° and Wits appraisal (p < 0.05). Non-significant FMA° changes have been observed post-treatment in the three test groups (p > 0.05). The IMA, MB, and TB generated significant SPAD and sagittal changes, with both IMA and TB surpassing MB in the airway area improvement post-treatment. Moreover, the three tested Class II functional appliances did not affect the vertical dimension.

Morphologic predictors of mandibular changes induced by Sander's Bite Jumping Appliance.

AIM: This study aimed to identify pretreatment cephalometric variables as possible predictors of the mandibular length increase in Class II patients with mandibular retrusion, treated by means of the Bite Jumping Appliance (BJA). MATERIALS AND METHODS: Forty-three subjects (22 males and 21 females) with Class II malocclusion, treated with a BJA, were selected on the basis of the following inclusion criteria: full Class II molar relationship, Overjet (OVJ) ≥ 6 mm and a skeletal Class II malocclusion with mandibular retrusion at the start of the treatment (T0); cervical vertebral maturation stage 2 or 3 at time 0 (T0). The following mandibular structural features were measured on lateral cephalograms at time 0 and time 1 (15 months of treatment): the width and height of the mandibular symphysis and its width/height ratio, the width and height of the mandibular ramus and its width/height ratio, the antegonial notch depth and the Condilion-Gonion-Menton (Co-Go-Me) angle. Post-treatment changes were assessed by Pancherz's cephalometric analysis, evaluating the increases in mandibular length. A regression statistical model was used to test the association between morphologic variables and mandibular length changes. RESULTS: At T1, a significant increase in mandibular length (7.1 + 3.4 mm, p < .001) was measured. A significant negative association between the pretreatment Co-Go-Me angle and mandibular length change was found (p < .05). IMPA angle was negatively associated with mandibular length change. All the others morphological feature were not statistically related to mandibular length change. CONCLUSION: Co-Go-Me angle and IMPA angle at T0 can be used as predictors for mandibular response to the treatment with BJA.

Treatment of Vertical Maxillary Excess and Skeletal Class II Malocclusion: A Case Report.

Class II malocclusion is a recurrent problem that may occur at a young age. If treated initially, the malocclusion can be corrected by redirecting the growth without invasive modalities and avoiding orthognathic surgeries. A female patient aged 10 years three months came to the department of orthodontics having a complaint of upper front teeth placed forwardly, diagnosed with skeletal class II due to retrusive mandible and vertical maxillary excess with hyper divergent growth pattern with increased anterior facial height, with Angle's molar class II division 1 malocclusion, increased overjet of 13 mm and overbite of 7 mm, acute nasolabial angle, deep mentolabial sulcus, and hyperactive mentalis. It was treated using an activator with medium-high-pull headgear (modified Herren activator) passing through the maxillary center of resistance. A fixed mechanotherapy with high-pull headgear was given using the anterior inclined plane acrylic plate in the maxilla and McLaughlin, Bennett, and Trevisi (MBT). Begg's wrap was used for the retention plan. This case report shows the significance of proper treatment results obtained due to correct identification and planning in treating malocclusion. This case report shows the significance of proper treatment results obtained due to correct identification and planning in treating malocclusion.

Indirect suppression of CD4 T cell activation through LAG-3-mediated trans-endocytosis of MHC class II.

Blockade of immune checkpoint receptors has shown outstanding efficacy for tumor immunotherapy. Promising treatment with anti-lymphocyte-activation gene-3 (LAG-3) has already been recognized as the next efficacious treatment, but there is still limited understanding of the mechanism of LAG-3-mediated immune suppression. Here, utilizing high-resolution molecular imaging, we find a mechanism of CD4 T cell suppression via LAG-3, in which LAG-3-bound major histocompatibility complex (MHC) class II molecules on antigen-presenting cells (APCs) gather at the central region of an immunological synapse and are trans-endocytosed by T cell receptor-driven internalization motility toward CD4 and CD8 T cells expressing LAG-3. Downregulation of MHC class II molecules on APCs thus results in the attenuation of their antigen-presentation function and impairment of CD4 T cell activation. From these data, anti-LAG-3 treatment is suggested to have potency to directly block the inhibitory signaling via LAG-3 and simultaneously reduce MHC class II expression on APCs by LAG-3-mediated trans-endocytosis for recovery from T cell exhaustion.

IFNh and IRF9 influence the transcription of MHCII mediated by IFNγ to maintain immune balance in sea perch lateolabrax japonicus.

The major histocompatibility complex class II (MHCII) molecules are crucial elements of the adaptive immune system, essential for orchestrating immune responses against foreign pathogens. However, excessive expression of MHCII can disrupt normal physiological functions. Therefore, the host employs various mechanisms to regulate MHCII expression and maintain immune homeostasis. Despite this importance, limited studies have explored the negative regulation of MHCII transcription in bony fish. In this study, we found that interferon h (IFNh), a subtype of type I IFN in sea perch Lateolabrax japonicus, could inhibit the activation of IFNγ induced-MHCII expression by modulating the transcription of the class II major histocompatibility complex transactivator (CIITA). Transcriptome analysis revealed 57 up-regulated and 69 down-regulated genes in cells treated with both IFNγ and IFNh compared to those treated with IFNγ alone. To maintain cellular homeostasis, interferon regulatory factor 9 (IRF9) was up-regulated following IFNγ stimulation, thereby preventing MHCII overexpression. Mechanistically, IRF9 bound to the CIITA promoter and suppressed its expression activated by IRF1. Furthermore, IRF9 inhibited the promoter activity of both MHCII-α and MHCII-ß induced by CIITA. Our findings highlight the roles of IFNh and IRF9 as suppressors regulating MHCII expression at different hierarchical levels. This study provides insights into the intricate regulation of antigen presentation and the foundation for further exploration of the interaction mechanisms between aquatic virus and fish.

Facial asymmetry outcome of orthognathic surgery in mild craniofacial microsomia compared to non-syndromic class II asymmetry.

OBJECTIVES: To compare the facial asymmetry after bimaxillary surgery between mild craniofacial microsomia (CFM) and non-syndromic class II asymmetry. MATERIALS AND METHODS: Cone-beam computed tomography scans of adults with Pruzansky-Kaban types I and IIA CFM (CFM groups, n = 20), non-syndromic skeletal class II asymmetry (Class II group, n = 20), and normal controls (control group, n = 20) were compared. The area asymmetry of lower face and jaw bones was quantified. Landmark-based method was used to evaluate the lower facial asymmetry regarding midline, cants, and contour. RESULTS: There were no significant postoperative differences in the hemi-facial and hemi-jaw area asymmetry between CFM and Class II groups, both of which were significantly larger than the control group. No significant difference was found in the midline deviation and lip and occlusal cants between CFM and Class II groups. The vertical contour asymmetry in CFM group became significantly larger than Class II group. Compared to the control group, the deviation of pronasale, subnasale, and soft-tissue menton, lip and occlusal cants, and sagittal and vertical contour asymmetry in CFM group were significantly larger, as were the deviation of subnasale and soft-tissue menton and vertical contour asymmetry in Class II group. CONCLUSIONS: The vertical contour asymmetry of mild CFM was significantly larger than non-CFM class II after surgery, while the area asymmetry, midline deviation, cants, and sagittal contour asymmetry of lower face showed no significant difference. CLINICAL RELEVANCE: Be aware that correcting vertical asymmetry of contour, lip, and dentition in CFM is still challenging.

"Sagittal First" Approach Using Carriere Motion 3D Appliance: A Case Report.

Aim: To present a case with skeletal class II malocclusion and mandibular retrusion treated using Carriere Motion Appliance (CMA). Background: Management of class II malocclusion in adolescent patients by growth modulation is one of the most debated topics in orthodontics. Fixed functional appliances are generally used in the patients who are at the end of the postpubertal growth spurt. However, most of the fixed functional appliances are placed only after the initial alignment and leveling, which takes up considerable duration of time. The Carriere Motion 3D is an efficient and effective way of correcting the sagittal component of class II malocclusion within the first half year of treatment followed by comprehensive therapy using fixed appliances. Case description: A 15-year-old male patient reported with the chief compliant of forwardly placed upper front teeth and functional jaw retrusion. It was treated initially with CMA and class II elastics for mandibular advancement. Simultaneously, lower arch was bonded with MBT 0.022" prescription for alignment and leveling. After 6 months, class I molar and canine relationship was achieved before proceeding with full orthodontic treatment. After 12 months of fixed orthodontics, the treatment goals were achieved. Conclusion: Carriere Distalizer appears to be more comfortable, offer a more positive overall experience, and has fewer side effects. The changes were mainly dentoalveolar in nature, but there were some skeletal changes, particularly in the sagittal and vertical dimensions. Clinical significance: A significant forward displacement of the mandible was the principal element for successful correction of class II malocclusion. CMA provides the best results for class II management, enabling us to treat such cases with a nonextraction approach rather than contemplating extractions. How to cite this article: P SD, Ahmed N, Urukalan H, et al. "Sagittal First" Approach Using Carriere Motion 3D Appliance: A Case Report. Int J Clin Pediatr Dent 2024;17(4):490-496.

Network analysis of three-dimensional hard-soft tissue relationships in the lower 1/3 of the face: skeletal Class I-normodivergent malocclusion versus Class II-hyperdivergent malocclusion.

BACKGROUND: The determining effect of facial hard tissues on soft tissue morphology in orthodontic patients has yet to be explained. The aim of this study was to clarify the hard-soft tissue relationships of the lower 1/3 of the face in skeletal Class II-hyperdivergent patients compared with those in Class I-normodivergent patients using network analysis. METHODS: Fifty-two adult patients (42 females, 10 males; age, 26.58 ± 5.80 years) were divided into two groups: Group 1, 25 subjects, skeletal Class I normodivergent pattern with straight profile; Group 2, 27 subjects, skeletal Class II hyperdivergent pattern with convex profile. Pretreatment cone-beam computed tomography and three-dimensional facial scans were taken and superimposed, on which landmarks were identified manually, and their coordinate values were used for network analysis. RESULTS: (1) In sagittal direction, Group 2 correlations were generally weaker than Group 1. In both the vertical and sagittal directions of Group 1, the most influential hard tissue landmarks to soft tissues were located between the level of cemento-enamel junction of upper teeth and root apex of lower teeth. In Group 2, the hard tissue landmarks with the greatest influence in vertical direction were distributed more forward and downward than in Group 1. (2) In Group 1, all the correlations for vertical-hard tissue to sagittal-soft tissue position and sagittal-hard tissue to vertical-soft tissue position were positive. However, Group 2 correlations between vertical-hard tissue and sagittal-soft tissue positions were mostly negative. Between sagittal-hard tissue and vertical-soft tissue positions, Group 2 correlations were negative for mandible, and were positive for maxilla and teeth. CONCLUSION: Compared with Class I normodivergent patients with straight profile, Class II hyperdivergent patients with convex profile had more variations in soft tissue morphology in sagittal direction. In vertical direction, the most relevant hard tissue landmarks on which soft tissue predictions should be based were distributed more forward and downward in Class II hyperdivergent patients with convex profile. Class II hyperdivergent pattern with convex profile was an imbalanced phenotype concerning sagittal and vertical positions of maxillofacial hard and soft tissues.