Effect of carbamide peroxide treatment on the ion release of different dental restorative materials.

BACKGROUND: To predict the long-term performance of restorative materials in the oral environment, it is important to evaluate their resistance to chemical and mechanical degradation and to know the toxic potential of the type and amount of ions eluted from the filling material. In this study, home bleaching was applied to dental materials with different contents and it was aimed to determine the type and amount of ions released from these materials. METHODS: In this study, amalgam, posterior composite resin, anterior composite resin, bulk fill composite resin, indirect composite resin, hybrid ceramic and all-ceramic were used as restorative materials. 10 specimens of each material were prepared according to the manufacturer's instructions. Each material group was divided into two subgroups as the bleached group and the control group. After bleaching, all specimens were stored in 1 ml of 75% ethanol/water solution. Solutions were renewed after 1, 14 and 28 days. The type and amount of ions released from the materials were determined using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Data were analyzed using the Friedman, Wilcoxon Signed Ranks, and Mann-Whitney U tests (α = 0.05). RESULTS: It was determined that the amount of ions release from the restorative materials decreased over time (p < 0.05). According to the results of the Mann-Whitney U test, there was no difference between the bleaching and control groups in most of the restorative materials (p > 0.05). CONCLUSION: Within the limits of this study, home bleaching system does not have a significant effect on ion release from restorative materials.

From Decay to Delight: A Case Report on Esthetic Rehabilitation in Early Childhood Caries.

Early childhood caries (ECC) continues to be a major global dental health concern for young children. This case report examines a young patient's transformation from decay to delight via comprehensive esthetic treatment. ECC in a four-year-old child resulted in significant dental caries and poor esthetics. In addition to space maintenance and orthodontic examination, essential treatments included dental extractions, stainless steel crowns, and composite restorations. The result showed that the child's smile and self-esteem had been successfully restored, as well as their oral health and function. This case emphasizes the value of early intervention, multidisciplinary teamwork, and individualized treatment plans in the management of early childhood caries and the restoration of pediatric patients' oral health.

Evaluating the Success of Preformed Resin Bonded Composite Strip Crowns for the Primary Central Incisor in Restoring Carious Primary Canine Teeth: A Retrospective Analysis.

Background Restoration of primary canine teeth in pediatric dentistry requires a balance of functional, biological, and esthetic factors. Stainless steel crowns, while effective for posterior restorations, often have patient acceptance issues due to esthetic limitations. Resin-bonded composite strip crowns have gained traction for anterior restorations due to their superior esthetic qualities and repairability. However, their long-term performance in primary canines characterized by unique morphological and functional demands has not been thoroughly evaluated. This study investigates the efficacy of resin-bonded incisor strip crowns in primary canines over three years, assessing their functional durability, biological integrity, and esthetic performance to provide a comprehensive evaluation of their long-term success in this application. Methods This retrospective observational study, conducted from September 2023 to December 2023 at the Department of Pediatric and Preventive Dentistry, Saveetha Dental College and Hospitals, Chennai, Tamil Nadu, India, received ethical approval from the Institutional Human Ethical Committee (IHEC/SDC/PEDO-2103/23/131). Dental records from January 2020 to December 2020 were reviewed by two investigators to identify children aged six years or younger who had undergone pulpectomy in primary canine teeth and were restored with resin-bonded incisor strip crowns. Exclusions included records with missing contact details or post-treatment radiographs. The purpose was to ensure a three-year review period when contacting patients in 2023. Eligible parents were contacted by phone, informed about the study, and invited for a review. Informed consent was obtained in person. Children with exfoliated primary canines and those whose parents did not sign the consent form were excluded. The restored crowns were evaluated using World Dental Federation (FDI) criteria across functional, biological, and esthetic domains by two calibrated examiners. Statistical analysis was conducted using IBM SPSS Statistics for Windows, Version 24 (Released 2016; IBM Corp., Armonk, New York, United States), with categorical variables expressed as n (%), inter-examiner reliability assessed by Cohen's kappa, and chi-square test used for goodness of fit, setting significance at 95%. Results Of the 92 primary canines restored with resin-bonded incisor strip crowns, 60 children were evaluated. The retention rate at the three-year follow-up was 50 (83.3%). Functional evaluation revealed that 48 (80%) of crowns maintained surface texture, 42 (70%) preserved form and contour, and 52 (86.6%) demonstrated acceptable occlusion and wear. Biologically, 55 (91.7%) of the crowns had no secondary caries, and 56 (93.4%) had no dental hard tissue defects at the margin. Esthetically, 48 (80%) of crowns retained surface texture, 46 (76.6%) had a satisfactory color match, and 45 (71.6%) exhibited minimal marginal staining. Statistical analysis confirmed significant results for all functional and esthetic parameters (p < 0.05). Conclusion The technique of placing incisor strip crowns in the place of primary canines can be recommended considering its maintenance of functional, biological, and esthetic properties.

Direct Composite Restorations on Permanent Teeth in the Anterior and Posterior Region - An Evidence-Based Clinical Practice Guideline - Part 1: Indications for Composite Restorations.

PURPOSE: This German S3 clinical practice guideline offers evidence-based recommendations for the use of composite materials in direct restorations of permanent teeth. Outcomes considered were the survival rates and restoration quality and process quality of the manufacturing process. Part 1 of this two-part presentation deals with the indication classes. MATERIALS AND METHODS: A systematic literature search was conducted by two methodologists using MEDLINE and the Cochrane Library via the OVID platform, including studies up to December 2021. Six PICO questions were developed to guide the search. Recommendations were formulated by a panel of dental professionals from 20 national societies and organizations based on the collected evidence. RESULTS: Composite materials are a viable option for the direct restoration of cavity Classes I-V and may also be used for restorations with cusp replacement, and tooth shape corrections. In the posterior region, direct composite restorations should be preferred over indirect composite inlays. For Class V restorations, composite materials can be used if adequate contamination control and adhesive technique are ensured. CONCLUSION: The guideline is the first to provide comprehensive evidence on the use of direct composite materials. However, further long-term clinical studies with comparators such as (modified) glass-ionomer cements are necessary. Regular updates will detail the future scope and limitations of direct composite restorations.

Comparative evaluations of shear bond strength of mineral trioxide aggregate, Biodentine, and calcium-enriched mixture to bulk-fill flowable composite using three different adhesive systems: An in vitro study.

Objective: The objective of the study was to assess the shear bond strength of bulk-fill flowable composite resin smart dentin replacement plus when bonded to mineral trioxide aggregate (MTA)-angelus, biodentine, and calcium-enriched mixture (CEM) at two different aging periods (15 min and 72 h) using three distinct adhesive systems. In addition, the study identified the specific modes of failure (adhesive, cohesive, or mixed) using a stereomicroscope and scanning electron microscope. Materials and Methods: One hundred and twenty-six cylindrical acrylic blocks used in the study were sorted into three groups based on the bioactive substance used to fill the 3-mm diameter and 3-mm high hole in the center of each block. The groups were MTA, Biodentine, and CEM. The specimens were then divided into subgroups based on the aging interval (15 min and 72 h) of the bioactive material and the adhesive system used (two-step total-etch, two-step self-etch [SE], and one-step SE) while bonding to the restorative bulk-fill flowable composite. The shear bond strength values were measured with a universal testing machine, and the data were analyzed using two-way and one-way analysis of variance, followed by a post hoc test. The specimens were assessed under stereomicroscope and scanning electron microscope to characterize the mode of bond failure (cohesive, adhesive, or mixed). Results: The study showed that the type of adhesive system and the time of bonding affected the shear bond strength of bulk-fill composite to the pulp capping agents (P < 0.05). For MTA, the highest bond strength was observed with two-step SE group at 15 min (18.16 ± 2.97 MPa) (P < 0.05). CEM exhibited the highest bond strength with two-step SE group at 72 h intervals (8.77 ± 1.76) (P < 0.05). The highest bond strength for biodentine group was observed with total-etch group (8.54 ± 1.35 Mpa) and two-step SE (8.19 ± 1.94 Mpa) bonded at 72 h interval (P < 0.05). The majority of the samples in the MTA group (29/42) and CEM group (20/42) showed a cohesive fracture, whereas Biodentine group (22/42) had an adhesive fracture in most of its samples. Conclusion: MTA demonstrated the highest bond strength with two-step SE group at 15 min, and CEM exhibited the highest bond strength with two-step SE groups at 72 h interval. For biodentine group, the type of adhesive used did not impact the bond strength values.

Effect of nonthermal atmospheric plasma application at different time intervals on the dentinal shear bond strength pretreated with 2% chlorhexidine as cavity disinfectant: An in vitro study.

Context: Effective use of nonthermal atmospheric plasma (NTAP) to strengthen adhesive-dentin interfacial bonding while disinfecting with chlorhexidine (CHX). Aim: NTAP application at different time intervals on the dentinal shear bond strength (SBS) after pretreatment with 2% CHX as a cavity disinfectant. Settings and Design: The design of the study was an in vitro study. Materials and Methods: Forty permanent mandibular teeth were collected (n = 40) and the occlusal surfaces were flattened. For, all the specimens 37% phosphoric acid etching was done followed by pretreatment with 2% CHX as cavity disinfectant for 5 s. According to the surface treatment, divided into four groups of n = 10. Group I (Control): No NTAP pretreatment was done. Group II: NTAP pretreatment done for 15 s. Group III: NTAP pretreatment done for 30 s. Group IV: NTAP pretreatment done for 45 s. Later, all the specimens were treated with a bonding agent, incremental build-up of composite resin on the dentin surface was done and evaluation of SBS was done. Analyzed using One-way analysis of variance with a post hoc Tukey's test (P < 0.05). Results: Two percent CHX pretreatment as cavity disinfectant followed by NTAP application for 30 s (Group III) exhibited greater values compared to the control group (Group I). Conclusion: Two percent CHX pretreatment as cavity disinfectant followed by NTAP pretreatment for 30 s was found to exhibit better bond strength values compared to 15 s as well as 45 s.

Impact of repair protocols on the bond strength to composite resin.

This study evaluated the impact of different repair protocols on a composite resin substrate using distinct bonding agents submitted or not to artificial aging. Unopened sets of a single-step universal adhesive system (UA) and silane-coupling agents, a single-step pre-hydrolyzed (PH) or a two-step immediately hydrolyzed (IH), were used. Half of the sets were subjected to artificial aging being stored at 48 °C for 30 days, while the other half remained unaged. The composite resin substrates were prepared and aged in distilled water, sandblasted (Al2O3), and cleaned. Then the different repair protocols were applied according to the groups. UA was used without a previous silane layer, while PH and IH were applied followed by a single-step etch-and-rinse adhesive system. Adhesive systems were light-activated, and four composite resin cylinders were formed over the substrate. After 24 h, the specimens were subjected to microshear bond strength (µSBS) test and failure mode analysis. The µSBS data were subjected to two-way ANOVA followed by Tukey HSD; Kruskal-Wallis analysis was used for failure mode distribution (α = 0.05). After aging the products, UA showed higher bond strength, while PH had significantly lower results, and IH showed no significant differences (p = 0.157). No significant differences were found for bond strength among the repair protocols when using non-aged products (p > 0.05). The protocols using UA and IH showed no significant differences between aged and non-aged bottles, whereas PH exhibited lower bond strength when comparing aged and non-aged products. More cohesive failures were observed in the resin substrate for the IH group without aging.

An In Vitro Analysis of the Effects of Mouthwashes on the Surface Properties of Composite Resin Restorative Material.

BACKGROUND: Restorative composite resins have clinical prime importance in modern dental practice, but numerous factors influence their prognosis in the oral environment. Their interaction with oral care products, like mouthwashes, is one such factor. This study aimed to evaluate the quantifiable effects of different mouthwashes on the surface properties of the composite resin restorative material. METHODOLOGY: The method involved formulating 90 samples of nanohybrid composite resins (Medicept Dental India Private Limited, Mumbai, India). The samples were treated with 1% alcohol, without alcohol, and with a saline solution (control). Surface roughness (Ra values) and microhardness had been checked before and after an exposure period of 24 hours. Data were thus tabulated, and from that, average values of surface roughness and microhardness were derived. This data was analyzed using the IBM SPSS Statistics for Windows, V. 26.0 (IBM Corp., Armonk, NY). Analysis of variance (ANOVA) and a t-test were used to compare the means of the variables. The level of significance was fixed at p < 0.05. RESULTS: The surface roughness value was significantly highest in the ethanol-containing mouthwash-treated samples after 24 hours of exposure (p < 0.05). The microhardness was statistically lower in these samples (p < 0.05). CONCLUSION: These research data give quantitative information, however, about the mass effect of mouthwashes on the composite resin restorative material. The presented changes, which were illustrated by the values of surface roughness and microhardness, are drawing attention to the fact that a cautious approach must be taken in the recommendations for oral care in the provision of intensive treatments with restorative composite resins.

Mechanical properties and formulation of hydrophilic fiber and shrimp shell combination as a novel eco-friendly dental restoration material.

This study evaluates the mechanical properties and formulation of dental restoration material comprised of cellulose acetate (CA) from water hyacinth and chitosan (C) from white shrimp shells. The research phases included extraction, formulation, functional group testing, antibacterial, toxicity, water absorption and solubility, compressive, shear, tensile, hardness, microleakage, thermal expansion, and shrinkage. The experimental data were analyzed using probit regression, one-way ANOVA, and Kruskal-Wallis test. The data showed that CA and C had microxyl and amine groups, could inhibit S. mutans, and were non-toxic. Composite resins were divided into nine formulations with different concentrations: F1 (1 % CA + 3 % C), F2 (1 % CA + 5 % C), F3 (1 % CA + 7 % C), F4 (3 % CA + 3 % C), F5 (3 % CA + 5 % C), F6 (3 % CA + 7 % C), F7 (5 % CA + 3 % C), F8 (5 % CA + 5 % C), and F9 (5 % CA + 7 % C). The F9 has mechanical strength close to the control group, with 113.33 µg/mm3 absorption, 80 µg/mm3 solubility, 32.67 Mpa compressive strength, 17.18 Mpa tensile strength, and no shrinkage. It shows that F9 has potential as an eco-friendly dental filling material. The present study completed the development of a formulation for a restoration material by combining water hyacinth fiber and shrimp skin chitosan. The outcomes of a comparative analysis of the mechanical properties of synthetic composite resins and water hyacinth fiber composites containing shrimp skin chitosan revealed that the F9 formulation (CA 5 % + C 7 %) exhibited the following fiber: absorption, compressive strength, tensile strength, hardness, and thermal expansion.

Smile Renewal: Incisor Restoration Using the Strip Crown Technique.

Aesthetics has been an important aspect of dentistry along with functionality for decades but its significance is at an all-time high. Hence among techniques that contribute toward this goal, strip crown has shown convincing results. However, its acceptance did not reach its potential, especially among general dentists which could be attributed to its technique-sensitive nature. This case report sheds light on the practicality and reliability of this technique along with various modifications made by authors while striving to improve the quality of treatment provided by the clinician.

Antibacterial properties of mesoporous silica coated with cerium oxide nanoparticles in dental resin composite.

Cerium oxide nanoparticles are known for their antibacterial effects resulting from Ce3+ to Ce4+ conversion. Application of such cerium oxide nanoparticles in dentistry has been previously considered but limited due to deterioration of mechanical properties. Hence, this study aimed to examine mesoporous silica (MCM-41) coated with cerium oxide nanoparticles and evaluate the antibacterial effects and mechanical properties when applied to dental composite resin. Cerium oxide nanoparticles were coated on the MCM-41 surface using the sol-gel method by adding cerium oxide nanoparticle precursor to the MCM-41 dispersion. The samples were tested for antibacterial activity against Streptococcus mutans via CFU and MTT assays. The mechanical properties were assessed by flexural strength and depth of cure according to ISO 4049. Data were analyzed using a t-test, one-way ANOVA, and Tukey's post-hoc test (p = 0.05). The experimental group showed significantly increased antibacterial properties compared to the control groups (p < 0.005). The flexural strength exhibited a decreasing trend as the amount of cerium oxide nanoparticle-coated MCM-41 increased. However, the flexural strength and depth of cure values of the silane group met the ISO 4049 standard. Antibacterial properties increased with increasing amounts of cerium oxide nanoparticles. Although the mechanical properties decreased, silane treatment overcame this drawback. Hence, the cerium oxide nanoparticles coated on MCM-41 may be used for dental resin composite.

Spot-etch technique and other adhesive strategies for provisional veneers.

AIM: The objective of the present study was to evaluate the influence of different adhesive strategies regarding shear bond strength (SBS) of provisional resin--based materials bonded to the enamel surface as well as on the enamel surface roughness. MATERIALS AND METHODS: Bovine incisors were randomly divided into six groups (n = 10) according to the adhesive strategy used: BRControl (bis-acrylic resin); Spot-etch+BR (spot-etch + bis-acrylic resin); Spot--etchSB2+BR (spot-etch + adhesive + bis-acrylic resin); Spot-etchZ350Flow+BR (spot-etch + flowable composite resin + bis-acrylic resin); SBU+BR (universal adhesive + bis-acrylic resin); Spot-etchSBMP+Z350 (spot-etch + adhesive + composite resin). The enamel surface roughness was determined by a surface profil-ometer. An SBS test was performed in a universal testing machine, and failure modes were classified under magnification. The SBS data were analyzed by one-way analysis of variance (ANOVA). A paired t test was used for enamel surface roughness intragroup comparisons, and the Friedman one-way repeated meas-ures analysis of variance by ranks was used for differences in enamel surface roughness between groups, with the Tukey post hoc test (a = 0.05). RESULTS: BRControl had the lowest SBS values (MPa), with a significant difference (P ≤ 0.001) from the other groups. Spot-etch+BR had the highest SBS values but with no significant differences from the other groups in which the spot-etch technique was also used. Adhesive failure mode was predominant for all groups. BRControl had the lowest surface roughness difference, significantly different (P = 0.001) from all the other groups. CONCLUSIONS: Spot-etch and other adhesive strategies could be applied to increase the SBS values of provisional restorations to enamel compared with no surface pretreatment. However, the adhesive strategy may change the enamel surface roughness, revealing the importance of cleaning the tooth surface.

Clinical Effectiveness of High-viscosity Glass Ionomer Cement and Composite Resin as a Restorative Material in Primary Teeth: A Systematic Review of Clinical Trials.

Aim: This systematic review was designed to compare the clinical effectiveness of high-viscosity glass ionomer cement (HVGIC) restorations to direct composite resin (CR) restorations in single- or multisurface cavities in primary teeth. Background: Restorative procedures are typically used to treat caries in primary teeth. Due to their improved preservation of the natural tooth structure and their adhesion to the remaining tooth structure, CR and GIC have drawn attention as the preferred restorative materials. In the literature, over the past 20 years, the term HVGIC has developed. Compared to C-GICs, HVGICs appear to have a higher survival rate. However, isolated studies provide contradictory findings regarding the durability of restorations in primary teeth. Materials and methods: Major electronic databases were thoroughly searched to find publications from the years 2000 to 2021. Studies included were randomized and nonrandomized clinical trials on children aged 3-13 years, in which restoration of primary teeth using HVGIC and CR was performed. Results: This systematic review includes four studies [three randomized controlled trials (RCTs) and one nonrandomized controlled trial]. No statistically significant difference between these materials was seen in any of the included studies. Conclusion: This systematic review of findings supports the assertion that both HVGIC and CR restorations deliver satisfactory outcomes in terms of clinical efficacy and overall survivability. It was found that, for both materials, class I restorations had statistically higher survival rates than class II restorations. Long-term studies are essential to evaluate the clinical efficacy of both restorations. Clinical significance: This systematic review outlines the application of HVGIC and CR as restorative materials for pediatric dentists to use in their everyday dental practices. How to cite this article: Krishnakumar K, Kalaskar R, Kalaskar A, et al. Clinical Effectiveness of High-viscosity Glass Ionomer Cement and Composite Resin as a Restorative Material in Primary Teeth: A Systematic Review of Clinical Trials. Int J Clin Pediatr Dent 2024;17(2):221-228.

Precision layering techniques: Integrating digital tools for accurate color matching and realistic try-ins in anterior composite restorations.

OBJECTIVE: This article aims to demonstrate the clinical application of a comprehensive workflow that integrates digital tools for accurate color matching, and its immediate implementation in the restoration of anterior teeth. CLINICAL CONSIDERATIONS: Two patients demonstrating dissatisfaction regarding a maxillary central incisor had an old restoration replaced resorting to a digital workflow to enhance the predictability of the new direct restoration. OptiShade allowed the precise assessment of tooth color and the CompoShade application provided precise color and material selection, as well as the determination of a layering strategy. Precision and accuracy of the colorimeter and the composite layering application were demonstrated clinically in vivo. CONCLUSIONS: Implementing a digital workflow with the integration of OptiShade measurements and the CompoShade layering recipe calculation, as well as the respective realistic try-in, enables the achievement of precise color matching for anterior composite restorations. CLINICAL SIGNIFICANCE: The employment of a digital colorimeter and layering recipes simplify shade matching, and optimizes composite resin clinical use and success. The implementation of a realistic try-in, previous to the definitive restoration, allows the clinician to perform any adjustments if needed.

The Impact of Titanium Hydroxyapatite Doping on the Mechanical and Biological Properties of Photocured Resin.

Photocured resin materials are widely used in various fields, such as 3D printing, medical applications, and dentistry. However, the strength, wear resistance, and antibacterial properties of photocured resin are relatively limited, rendering it susceptible to potential failures. In this recent study, photocured composite resins incorporating titanium-doped hydroxyapatite (Ti-HAp) were fabricated to investigate their mechanical and biological properties. It was found that the hardness and wear resistance increased with the addition of an appropriate amount of hydroxyapatite (HAp). Specifically, the 6wt%HAp resin demonstrated superior hardness. Compared with the 6wt%HAp resin, the acid resistance and wear resistance improved when an appropriate amount of Ti-HAp was added. Notably, the resin containing 0.56%Ti-HAp demonstrated superior wear resistance. Additionally, the antibacterial performance improved with higher titanium (Ti) content, showcasing a 71.9% improvement in the resin containing 1.37%Ti-HAp compared with the 6wt%HAp resin, alongside commendable remineralization capabilities. In summary, the Ti-HAp composite resin showed enhanced mechanical and biological properties, meeting clinical standards in terms of mechanical and antibacterial properties.

Influence of Different Application Modes of a Universal Adhesive System on the Bond Strength of Bulk-Fill Composite Resin to Enamel and Dentin in Primary Teeth.

OBJECTIVES: The objective of this study was to assess how the application mode of a universal adhesive system affects the microshear bond strength (µSBS) of bulk-fill and conventional composite resins to enamel and dentin in primary teeth. METHODS: A total of 80 caries-free primary second molars were randomly assigned to eight experimental groups (n = 10) based on the bonding substrate (enamel or dentin), the application mode of the universal adhesive system (etch and rinse [E&R], or self-etch [SE]), and the type of composite resin used (bulk-fill or conventional). After bonding the composite resin to enamel or dentin, the µSBS of the bonded composite resins was measured. RESULTS: The mean µSBS value of bulk-fill composite resin was significantly higher than that of conventional composite resin for both enamel and dentin substrates, regardless of the application mode (p < 0.001). An interaction effect between the bonding substrate and the application mode of the adhesive system was observed, indicating a significant relationship (p < 0.001). The highest µSBS values for primary teeth enamel were achieved using the E&R mode with bulk-fill composite resin, while for dentin specimens, the SE mode with bulk-fill composite resin yielded the highest µSBS values. The µSBS of the E&R group was significantly higher than that of the SE group for enamel specimens (p < 0.001), whereas the µSBS of the SE group was significantly higher than that of the E&R group for dentin specimens (p < 0.001). CONCLUSION: Bulk-fill composite resin demonstrated higher µSBS in comparison to conventional composite resin. The universal adhesive system exhibited superior performance in the SE mode compared to the E&R mode on primary dentin. Pre-etching the enamel before the application of the universal adhesive enhanced the µSBS to primary teeth enamel, highlighting the importance of selectively acid etching the enamel of primary teeth.

Effects of Er,Cr:YSGG Laser Surface Treatments and Composites with Different Viscosities on the Repair Bond Strength of CAD/CAM Resin Nanoceramic.

This study aims to evaluate the repair micro-shear bond strength of the CAD/CAM resin nanoceramic block treated using four different surface treatments and composite resins of different viscosities. For the current study, 96 samples with dimensions of 14 × 12 × 2 mm were obtained from a CAD/CAM resin nanoceramic block (Cerasmart) with a low-speed precision cutting saw under water cooling. The relevant samples were randomly divided into four groups according to the surface treatment processes: grinding with diamond bur, aluminum oxide airborne-particle abrasion, long-pulse laser, and short-pulse laser. Following silane application, universal adhesive was applied to all surface-treated samples and cured with an LED for 10 s. The samples prepared for the repair procedure were divided into two subgroups (microhybrid composite and injectable composite) according to the viscosity of the repair material to be used (n = 12). After the repair procedure, care was taken to keep the samples in distilled water in an incubator at 37 °C for 24 h. The repair micro-shear bond strength values (µSBSs) of CAD/CAM resin nanoceramic-composite resin complexes were tested. In addition, randomly selected samples from each group were examined with a scanning electron microscope to evaluate the surface topography after both surface treatments and the micro-shear bond strength test. Data were analyzed by two-way ANOVA and Bonferroni test. It was determined that the surface treatment preferred in the repair protocol significantly affected the µSBS value (p < 0.001). While the highest µSBS value was obtained with the short-pulse laser airradiation group, the lowest µSBS values were found in samples with long pulse laser irradiation. However, samples grinded with a bur and airborne-particle abrasion showed similar µSBS values (p > 0.05). The preferred composite viscosity in the repair procedure has a significant effect on the µSBS value (p < 0.001). However, the interaction between the surface treatment and the viscosity of the repair composite does not affect the µSBS values in a statistically significant way (p = 0.193). It may be recommended to clinicians to repair CAD/CAM resin nanoceramic restoration surfaces with injectable composites or after treatment with short-pulse lasers.

Evaluation of direct restorations for pit-and-fissure caries using stamp combined with single-shade composite resin technique: A 12-month follow-up in vivo study.

OBJECTIVES: To evaluate the clinical performance of direct restorations for pit-and-fissure caries in molars using stamp combined with single-shade composite resin (S/SCR) technique, and assess the effect of the number of stamp pressing on the trueness of S/SCR technique. METHODS: Twenty molars of fifteen patients with pit-and-fissure caries but with an intact or micro-cavitated occlusal morphology were restored using S/SCR technique and were randomly divided into single pressing group (n = 10) and double pressing group (n = 10). Intraoral scans were obtained before treatment (scan 1), after filling (scan 2) and after polishing (scan 3). Deviation distribution maps of pairwise fitting were created including comparison 1 (scan1/scan 2), comparison 2 (scan1/scan 3), and comparison 3 (scan2/scan 3) using Geomagic Control X software. Root mean square (RMS) values were calculated to evaluate the trueness of restorations. Clinical performances including esthetic, functional, and biological properties of all restorations were evaluated according to FDI criteria after a 12-month follow-up. Analysis of variance, independent-samples T test and Wilcoxon rank-sum test were used for statistical analysis (α=0.05). RESULTS: RMS values for comparison 1, comparison 2, and comparison 3 were 0.1243 ± 0.0151, 0.0966 ± 0.0136, and 0.0605 ± 0.0137 mm in single pressing group, while 0.0831 ± 0.0140, 0.0741 ± 0.0107, and 0.0475 ± 0.0099 mm in double pressing group, respectively. RMS value of single pressing group was higher than that of double pressing group in the same comparison (p ≤ 0.001). No statistically significant differences were observed between the two groups regarding esthetic, functional and biological properties (p > 0.05). For all properties, all restorations scored within 3, with over 80% scoring 1. CONCLUSION: S/SCR technique presents satisfying clinical performances for pit-and-fissure caries in molars after a 12-month follow-up. Besides, double pressing can improve the trueness of restorations compared to single pressing. CLINICAL SIGNIFICANCE: S/SCR technique is efficient in direct composite resin restoration for pit-and-fissure caries, with satisfying esthetic, functional and biological properties after a 12-month follow-up. Significantly, double pressing improves the trueness of S/SCR technique, reducing the need for occlusion adjustment.

Effect of adding ytterbium trifluoride filler particles on the mechanical, physicochemical and biological properties of methacrylate-based experimental resins for 3D printing.

OBJECTIVE: To formulate an experimental methacrylate-based photo-polymerizable resin for 3D printing with ytterbium trifluoride as filler and to evaluate the mechanical, physicochemical, and biological properties. METHODS: Resin matrix was formulated with 60 wt% UDMA, 40 wt% TEGDMA, 1 wt% TPO, and 0.01 wt% BHT. Ytterbium Trifluoride was added in concentrations of 1 (G1 %), 2 (G2 %), 3 (G3 %), 4 (G4 %), and 5 (G5 %) wt%. One group remained without filler addition as control (GC). The samples were designed in 3D builder software and printed using a UV-DLP 3D printer. The samples were ultrasonicated with isopropanol and UV cured for 60 min. The resins were tested for degree of conversion (DC), flexural strength, Knoop microhardness, softening in solvent, radiopacity, colorimetric analysis, and cytotoxicity (MTT and SRB). RESULTS: Post-polymerization increased the degree of conversion of all groups (p < 0.05). G2 % showed the highest DC after post-polymerization. G2 % showed no differences in flexural strength from the G1 % and GC (p > 0.05). All groups showed a hardness reduction after solvent immersion. No statistical difference was found in radiopacity, softening in solvent (ΔKHN%), colorimetric spectrophotometry, and cytotoxicity (MTT) (p > 0.05). G1 % showed reduced cell viability for SRB assay (p < 0.05). SIGNIFICANCE: It was possible to produce an experimental photo-polymerizable 3D printable resin with the addition of 2 % ytterbium trifluoride as filler without compromising the mechanical, physicochemical, and biological properties, comparable to the current provisional materials.

Selamento dentinário imediato em restauração semidireta: relato de caso / Immediate dentin sealing in semi-direct restoration: case report

O selamento dentinário imediato é um procedimento essencial na Odontologia, que envolve a aplicação de agentes de selamento na interface entre a dentina e o material restaurador imediatamente após a remoção da cárie e do preparo da cavidade dentária. Este processo busca selar os túbulos dentinários expostos, proporcionando proteção à polpa dentária. O presente caso foi realizado em um paciente do sexo masculino, 56 anos que se queixou de desconforto no elemento dentário 17. Após avaliação clínica e radiográfica, foi constatado uma ampla restauração desadaptada na porção mesio - oclusal do referido dente, sendo que o elemento em questão não possui tratamento endodôntico. Após planejamento e assinatura do TCLE, os seguintes passos foram realizados: remoção da lesão cariosa do dente 17, seguido da realização do levantamento marginal mesial e a realização do selamento dentinário imediato. Moldagem com silicone de adição do dente em questão e do antagonista, assim como registro da mordida. Foi confeccionada uma restauração semidireta em resina composta sob o modelo de gesso obtido. A cimentação da restauração foi feita na consulta seguinte, cumprindo os requisitos fundamentais para restaurar forma, função e estética, resultando na melhoria da qualidade de vida do paciente(AU)

Immediate dentin sealing is an essential procedure in dentistry, involving the application of sealing agents at the interface between dentin and the restorative material immediately after caries removal and cavity preparation. This process aims to seal exposed dentinal tubules, providing protection to the dental pulp. The present case involved a 56-year-old male patient who complained of discomfort in tooth number 17. After clinical and radiographic evaluation, a wide, maladapted restoration in the mesio-occlusal portion of the tooth was identified, with no endodontic treatment in the affected element. Following planning and informed consent, the following steps were taken: removal of the carious lesion from tooth number 17, followed by the execution of mesial marginal elevation and immediate dentin sealing. Silicone addition molding of the affected tooth and antagonist, along with bite registration, was performed. A semi-direct restoration in composite resin was fabricated based on the obtained gypsum model. The restoration was cemented in the subsequent appointment, meeting the essential requirements to restore form, function, and aesthetics, resulting in an improvement in the patient's quality of life(AU)