RESUMO
Due to the high manufacturing cost of memristors, an equivalent emulator has been employed as one of the mainstream approaches of memristor research. A threshold-type memristor emulator based on negative differential resistance (NDR) characteristics is proposed, with the core part being the R-HBT network composed of transistors. The advantage of the NDR-based memristor emulator is the controllable threshold, where the state of the memristor can be changed by setting the control voltage, which makes the memristor circuit design more flexible. The operation frequency of the memristor emulator is about 250 kHz. The experimental results prove the feasibility and correctness of the threshold-controllable memristor emulator circuit.
RESUMO
We present controllable and reliable complementary organic transistor circuits on a PET substrate using a photoactive dielectric layer of 6-[4'-(N,N-diphenylamino)phenyl]-3-ethoxycarbonylcoumarin (DPA-CM) doped into poly(methyl methacrylate) (PMMA) and an electron-trapping layer of poly(perfluoroalkenyl vinyl ether) (Cytop). Cu was used for a source/drain electrode in both the p-channel and n-channel transistors. The threshold voltage of the transistors and the inverting voltage of the circuits were reversibly controlled over a wide range under a program voltage of less than 10 V and under UV light irradiation. At a program voltage of -2 V, the inverting voltage of the circuits was tuned to be at nearly half of the supply voltage of the circuit. Consequently, an excellent balance between the high and low noise margins (NM) was produced (64% of NMH and 68% of NML), resulting in maximum noise immunity. Furthermore, the programmed circuits showed high stability, such as a retention time of over 10(5) s for the inverter switching voltage. Our findings bring about a flexible, simple way to obtain robust, high-performance organic circuits using a controllable complementary transistor inverter.