Reamer-scraping and implant-pushing technique for transcrestal sinus floor elevation.

Transcrestal maxillary sinus floor elevation is an effective method to solve the problem of insufficient bone height in the posterior maxillary region. However, current methods, such as osteotome sinus floor elevation, cushioned grind-out technique, Smart Drill technique, etc., require specialized surgical tool boxes. In this article, we introduce a new method of transcrestal maxillary sinus elevation that uses built-in reamers of various implant systems to scrap residual bone at the sinus floor and uses the implant to push the sinus membrane during implant placement. This technique is easy to operate and time saving and has a low rate of sinus membrane perforation. After a one-year follow-up observation of 146 people and 175 implants, the endo-sinus bone gains were 5.00 (4.70, 5.30) mm and 2.10 (1.40, 2.70) mm in the group of 3 mm≤residual bone height (RBH)<5 mm and the group of 5 mm≤RBH<8 mm, respectively, which can meet the clinical requirements of implant stability. This technique is suitable in generalizing dental implantation.

A novel implant placement technique using a three-dimensionally printed duplicate denture for implant-supported overdenture in patients with severe residual ridge resorption: A case report.

The treatment method of placing a small number of implants in the mandible as a removable implant-supported overdenture (IOD) enables implant placement and denture stability, even in cases with severe residual ridge resorption. In this case report, a new implant placement technique was performed using a three-dimensionally (3D)-printed duplicate denture fabricated by a 3D printer, resulting in the restoration of masticatory function through IOD.

Accuracy of conventional versus additive cast-fabrication in implant prosthodontics: A systematic review and meta-analysis of in vitro studies.

PURPOSE: Additive cast-fabrication has yet to be used as commonly in implant prosthodontics as conventional methods. This review aimed to investigate the accuracy of additive cast-fabrication in implant prosthodontics. STUDY SELECTION: The study protocol was registered in the PROSPERO database (CRD42022374972). Reporting was based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 guidelines, following the Cochrane Handbook. Two-arm interventional studies that matched the PICO were included (Population: dental typodonts with implants, Intervention: additive cast-fabrication, Comparator: conventional cast-fabrication, Outcome: positional deviations). A systematic search was conducted in three databases: PubMed (MEDLINE), EMBASE, and the Cochrane Library (CENTRAL). RESULTS: Seven papers were included in the analysis of horizontal, vertical, and root mean square (RMS) deviations. No significant differences were observed between groups. The overall vertical mean deviation of the intervention group was -4.15 µm [-24.88; 16.57], and the pooled mean absolute deviation was 22.43 µm [8.33; 36.54]. In the control group, these values were 19.67 µm [-32.71; 72.04] and 24.62 µm [0.00; 59.42], respectively. The overall horizontal mean deviation in the intervention group was 21.29 µm [-77.10; 119.68], and the pooled mean absolute deviation was 26.96 µm [0.00; 70.81]. In the control group, the overall mean was 1.45 µm [-32.26; 35.15] and the pooled mean absolute deviation was 25.05 µm [9.08; 41.01]. The mean RMS was only slightly larger in the intervention group, with the value of 14.74 µm [-107.26; 136.74]. CONCLUSIONS: Additive cast-fabrication is as accurate as the conventional method for the position of implant analogs.

Effect of leukocyte and platelet-rich plasma on osseointegration after implant placement in mouse maxilla.

Introduction: Osseointegration, the direct contact between an implant and bone, can be achieved by direct and/or indirect osteogenesis. Platelet-rich plasma accelerates tissue regeneration, wound healing, and osseointegration. This study aimed to analyze the effects of leukocyte and platelet-rich plasma (L-PRP) on direct and indirect osteogenesis after implant placement in a mouse maxilla. Methods: Blood was collected from the tail vein of 4-8-week-old male ICR mice and L-PRP was obtained after double-spin cycle centrifugation. After the right upper first molars of 4-week-old ICR mice were extracted while under deep anesthesia, the alveolar sockets were prepared with a drill, and titanium implants blasted with hydroxyapatite/ß-tricalcium phosphate were placed into the cavity filled with 1.5 µL of L-PRP. Samples were collected from the animals 3-28 days after implantation, and immunohistochemistry for osteopontin, Ki67 (cell proliferation marker), cathepsin-K (osteoclast marker), and osteonectin (osteoblast marker) was performed. Results: Cell proliferation was significantly higher in the L-PRP group than in the control group on postoperative days 3 and 5. The activities of osteoclast-lineage cells and osteoblasts increased significantly on day 5 in the L-PRP group, indicating that L-PRP evoked an active cellular response. Indirect osteogenesis was significantly higher on days 7, 14, and 28, and the osseointegration rate was significantly higher on day 28 in the L-PRP group compared with the control group. Conclusions: L-PRP enhances osseointegration by promoting mesenchymal cell proliferation, osteoclastic and osteoblastic activities, and indirect osteogenesis.

A forecasting model for suitable dental implantation in canine mandibular premolar region based on finite element analysis.

In recent years, dental implants have become a trend in the treatment of human patients with missing teeth, which may also be an acceptable method for companion animal dentistry. However, there is a gap challenge in determining appropriate implant sizes for different dog breeds and human. In this study, we utilized skull computed tomography data to create three-dimensional models of the mandibles of dogs in different sizes. Subsequently, implants of various sizes were designed and subjected to biomechanical finite element analysis to determine the optimal implant size. Regression models were developed, exploring the relationship between the average weight of dogs and the size of premolar implants. Our results illustrated that the regression equations for mean body weight (x, kg) and second premolar (PM2), third premolar (PM3), and fourth premolar (PM4) implant length (y, mm) in dogs were: y = 0.2785x + 7.8209, y = 0.2544x + 8.9285, and y = 0.2668x + 10.652, respectively; the premolar implant diameter (mm) y = 0.0454x + 3.3506, which may provide a reference for determine suitable clinical implant sizes for dogs.

Oral health self-perception, maximum bite force and masticatory efficiency in patients with overdentures with different attachment systems-A crossover study.

BACKGROUND: The literature is unclear about how the different attachment systems for overdentures impact the maximum bite force, the masticatory efficiency and how this impact in the oral health self-perception in patients. OBJECTIVE: To evaluate the effect of two attachment systems (O-ring and Locator) for mandibular overdenture using single implant on quality of life, maximum bite force (BF) and masticatory efficiency (ME). METHODS: Twenty-eight completely edentulous denture wearers with a mandibular symphysis implant were randomly selected and allocated into two groups in a crossover study, considering O-ring and Locator attachment types. The quality of life and self-perception of oral health were assessed using the Oral Health Impact Profile (OHIP-Edent) and Geriatric Index of Determination of Oral Health (GOHAI) questionnaires, respectively. BF was measured using a gnathodynamometer and ME by chewing silicone cubes and almonds in different numbers of cycles. RESULTS: There was no difference between the attachment systems about self-perceived oral health and impact on quality of life (p > .05). The O-ring-type system obtained a significantly higher BF than the locator-type system (p = .04). Regardless of the food chewed, no statistically significant difference was observed with the type of attachment (p > .05). The ME was directly proportional to the masticatory cycles only for almonds (p < .01). CONCLUSIONS: Locator and O-ring inserts had a similar impact on patients' quality of life, self-perception of oral health and ME. Additionally, the O-ring system exhibited superior properties in the BF.

Outcome Difference between Short and Longer Dental Implants Placed Simultaneously with Alveolar Bone Augmentation: a Systematic Review and Meta-Analysis.

Objectives: This systematic review and meta-analysis aim to provide detailed insights into the clinical performance of short and longer dental implants placed simultaneously with bone augmentation. Material and Methods: The search for literature was performed across MEDLINE (PubMed), ScienceDirect and the Cochrane Library databases, adhering to specific selection criteria and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Only articles published in English between 2014 and 2024 were considered for data collection. Primary outcomes were survival rate (SR), marginal bone loss (MBL) and complications. Clinical outcomes were as follows: bleeding on probing (BOP), periodontal pocket depth (PPD), and implant stability quotient (ISQ). Quality and risk of bias assessment were evaluated by the Critical Appraisal Checklist tool for randomized controlled trials developed by the Joanna Briggs Institute. Results: A total of 14678 articles were screened, with 9 meeting the inclusion criteria and being utilized for this systematic review and meta-analysis. A total of 495 patients with 984 implants (491 short and 493 longer implants) showing a SR of 93.91% for the short implants and 91.83% for the longer implants. Meta-analysis revealed statistically significant difference between short implants and longer implants simultaneously placed with alveolar bone augmentation in relation to MBL (-0.513 mm, 95% CI = -0.93 to -0.096; P = 0.02), and in PPD (-0.247, 95% CI = -0.515 to 0.022; P = 0.07). Conclusions: When comparing the results of treatment with short and longer dental implants combined with alveolar bone augmentation, short implants showed better clinical results regarding the parameters of survival rate, marginal bone loss and complications.

The Use of Platelet-Rich Fibrin in Sinus Floor Augmentation Surgery: a Systematic Review.

Objectives: This systematic review aims to critically assess the impact of platelet-rich fibrin on maxillary sinus floor augmentation and outline the specific aspects of new bone formation, bone height, implant stability quotient, and Schneiderian membrane thickness. Material and Methods: A systematic review and meta-analysis were conducted, analysing studies from MEDLINE (PubMed), the Cochrane Library, and ScienceDirect databases, published from January 29, 2018 until January 29, 2024 that compared maxillary sinus floor augmentation (MSFA) using bone graft material with and without platelet-rich fibrin (PRF). This review focused on patients 18 years and older who undergone MSFA before the dental implant placement. It systematically examined five studies, encompassing randomized controlled trials, and reported on 112 MSFA procedures conducted in 84 patients. Results: The meta-analysis reveals a marginal significance in new bone formation with PRF, suggesting a trend towards beneficial outcomes that were not statistically significant. No significant impact on bone height was observed. However, a notable improvement in implant stability quotient (ISQ) was recorded, indicating enhanced implant stability with PRF. The Schneiderian membrane thickness did not show significant changes post-treatment with PRF. Conclusions: While platelet-rich fibrin shows promise in enhancing implant stability, its effects on new bone formation and Schneiderian membrane thickness are inconclusive, highlighting the need for further research. Platelet-rich fibrin did not significantly affect bone height. The findings support platelet-rich fibrin's potential as a beneficial adjunct in maxillary sinus floor augmentation, particularly for implant stability.

Comparison of Short-term Outcomes Between Schneiderian Membrane Perforation and Non-perforation Patients after Simultaneous External Elevation and Implantation.

PURPOSE: To compare short-term outcomes between membrane perforation and non-perforation patients after simultaneous external elevation with implantation. MATERIALS AND METHODS: In this retrospective observational study, 60 maxillary posterior tooth-loss patients with an insufficient amount of residual bone for direct implantation were enrolled. All patients underwent simultaneous external elevation and implantation, and were divided into perforation and non-perforation groups according to the postoperative Schneiderian membrane status. RESULTS: Of the 60 patients, 30 cases (35 implants) were assigned to the membrane perforation group, and 30 (44 implants) were allocated to the non-perforation group. There were no statistically significant differences in baseline data (p>0.05). In the perforation group, the mean vertical bone gain (VBG) at 6 and 12 months was 6.02±2.14 mm and 5.37±2.22 mm, resp., compared to 6.78±2.59 mm and 6.42±2.64 mm in the non-perforation group, resp. (both p>0.05). Preoperative median Schneiderian membrane thickness (SMT) in the perforation group was 0.77 mm, which was statistically significantly thinner than the 1.24 mm measure in the non-perforation group (p< 0.05); however, there was no statistically significant difference between two groups at 12 months postoperatively (0.80 mm vs 1.25 mm, p>0.05). The marginal bone loss at 1 year after implant restoration in the perforation and non-perforation groups was 0.16±0.10 mm and 0.22±0.12 mm, resp. During postoperative follow-up, the implant survival rate was 100% in the two groups. The incidence of postoperative nasal bleeding in the perforation group was statistically significantly higher compared with that in the non-perforation group (50% vs 16.7%, p<0.05), whereas no statistically significant differences were observed in the incidence of facial swelling, intraoral bleeding, wound dehiscence and acute/chronic sinusitis between the two groups (p>0.05). CONCLUSIONS: Schneiderian membrane perforation after simultaneous external elevation and implantation do not adversely affect short-term clinical and radiographic outcomes.

LIMITED DATA SHOWS POTENTIAL OF FLAPLESS SURGERY FOR ENHANCED BUCCAL BONE PRESERVATION IN IMMEDIATE IMPLANT PLACEMENT.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Pitman J, Christiaens V, Callens J, Glibert M, Seyssens L, Blanco J, Cosyn J. Immediate implant placement with flap or flapless surgery: A systematic review and meta-analysis. J Clin Periodontol. 2023 Jun;50(6):755-764. doi: 10.1111/jcpe.13795. Epub 2023 Mar 5. PMID: 36843361. SOURCE OF FUNDING: The study was funded by the authors and their affiliated institutions. TYPE OF STUDY/DESIGN: Systematic review with meta-analysis.

Rehabilitation Using Implants with Sloped Platform Edge vs. Standard Platform with Guided Bone Regeneration: A Randomized Control Clinical Trial.

The purpose of this study was to evaluate the vertical bone loss after using different techniques: sloped implants or standard implants with guided bone regeneration. Patients with tooth gap and horizontal bone deficiency were randomly allocated to the test group (implants with sloped platform-SLP) and control group (standard design implants with guided bone regeneration-GBR). The primary outcome was bone loss (6 months after finishing the prosthetic treatment). Secondary outcomes included the following: patient-reported outcome measures (PROMs), post-operative edema, keratinized mucosa width, and pink aesthetic score (PES). The average bone loss at 6 months was 0.23 ± 0.15 mm and 1.03 ± 0.37 mm in the SLP and GBR groups, respectively. The SLP group was characterized by lower pain intensity the first 7 days (p < 0.001), lower post-operative edema (p < 0.001), lower consumption of NSAIDs on days 1, 3, 5, and 7 (p = 0.002, <0.001, <0.001, and 0.008), and lower total OHIP-14 (p = 0.047) on day 7. The keratinized mucosa width was 3.7 (3.4-4.0) mm and 2 (1.4-2.0) mm in the SLP and GBR groups, respectively. The preservation of the mesial, distal papillae, and the level of soft tissue correspondence were significantly higher in the SLP group (p = 0.003, 0.038, <0.001). In the SLP group, more natural color and better texture of soft tissues were found (p = 0.048, p = 0.041). The use of implants with a sloped platform resulted in superior outcomes compared to the standard-design implants with GBR.

Biomechanics of Dental Implantation in the Giant Panda (Ailuropoda melanoleuca): A Comparative Study Using Finite Element Analysis.

Giant pandas have a high incidence of tooth wear, loss, and fracture since their diet is specifically bamboo. Dental implantation is a common treatment for tooth loss in humans while rarely reported in wild animals. To explore the applicability of dental implantation in giant pandas, this study measured mandible parameters of the giant panda, from an adult skeletal specimen. The mandible bone block model was developed using computer-aided design 3D mechanical drawing software. Implants of different radius and thread types of the third premolar tooth (PM3) were assembled and imported into an analysis software system for finite element analysis. As a result, the reverse buttress implant with a radius of 7.5 mm and 8.3 mm, and a length of 15 mm was found to be the most suitable implant for use in the giant panda PM3. This study provides a reference for appropriate clinical giant panda dental implantation, although, the feasibility of giant panda dental implantation needs to be studied further.

Association of Connective Tissue Grafts in Immediate Implants: Systematic Review and Meta-Analysis.

BACKGROUND: The increase in soft tissue (ST) around implants can benefit peri-implant health and aesthetic results. The objective was to compare the gingival and esthetic health benefits of immediate implant placement (IIP) with simultaneous or delayed connective tissue graft (CTG) compared to IIP without CTG. METHODS: A systematic review was carried out by two reviewers in Medline-Pubmed, Scopus, and Cochrane. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) were considered. Randomized Clinical Trials (RCTs) that were published between April 2017 and February 2024 were used. Studies that analyzed the performance of a simultaneous or deferred CTG after the placement of an implant in the aesthetic zone, with or without immediate provisionalization, without previous regeneration, with a follow-up of 6 months, and that were performed in humans were included. RESULTS: Quantitative analysis was performed using data provided by the RCTs. The five RCTs that were selected analyzed a total "n" of 245 subjects who met the inclusion criteria and focused on the subject of the study. In the quantitative analysis, four RCTs were included. The studies evaluated buccal gingiva levels when placing the IIP with and without CTG, obtaining a mean buccal gingiva level difference of 0.09 mm (95% CI: -0.54 to 0.72, p = 0.05), statistically not significant, but with a favorable trend. CONCLUSIONS: The use of CTG associated with the II can maintain the gum level but not increase the volume. CTG is favorable for achieving successful esthetic results when immediate placement of an implant with a provisional prosthesis is planned.

Survival Rates of Short Dental Implants (≤6 mm) Used as an Alternative to Longer (>6 mm) Implants for the Rehabilitation of Posterior Partial Edentulism: A Systematic Review of RCTs.

Short dental implants have been proposed as an alternative treatment option to bone regeneration procedures for the rehabilitation of resorbed alveolar ridges. The aim of this paper was to systematically review randomized controlled trials (RCTs) comparing short implants (≤6 mm) and longer implants (>6 mm) in atrophic alveolar ridges in terms of implant survival rates, peri-implant marginal bone loss (MBL), prevalence of peri-implantitis and technical complications. A thorough electronic search was performed until September 2023. RCTs with follow-up of at least 1-year post-loading comparing short implants with rough surfaces to longer implants in the posterior jaws of systemically and periodontally healthy, partially edentulous adults were considered. Studies with incomplete information on the number of patients, follow-up or definition of "short implants" were excluded. The revised Cochrane risk-of-bias tool for randomized trials was used for Risk of bias assessment. Fixed-effects meta-analysis of the selected studies was applied to compare the outcome variables. Random-effect meta-analysis was performed, on the basis of within-study comparisons. In total, 16 articles were selected for meta-analysis and incorporated 408 short implants and 475 longer implants inserted in 317 and 388 patients, respectively. The survival rates of longer implants in pristine or augmented bone were significantly increased compared to short implants (95%CI: 2-5%, p < 0.001). Standard-length implants displayed increased, although non-statistically significant MBL (95%CI: -0.17-0.04, p > 0.05), and prevalence of peri-implantitis (95%CI: 0-5%, p > 0.05). No statistically significant differences were observed between short and long implants in terms of technical complications (implant-level 95%CI: -4-6%, p > 0.05). Short implants represent a promising alternative treatment option for the rehabilitation of posterior jaws to avoid additional bone augmentation procedures. Nonetheless, they should be selected cautiously due to a potentially limited survival rate compared to longer implants. A major limitation of this study is the variability in the included studies regarding sample size, patient profile, type of bone, loading protocol, definition of peri-implantitis, among others. This study received no external funding. The study protocol was registered in PROSPERO (CRD42023485514).

[Assessment of the condition of organs and tissues of the oral cavity in people with dentition defects against the background of metabolic syndrome]. / Otsenka sostoyaniya organov i tkanei rta u lits s defektami zubnykh ryadov na fone metabolicheskogo sindroma.

OBJECTIVE: The aim of the study is comparative analysis of the condition of oral organs and tissues in people with metabolic syndrome (MS) of varying severity before orthopedic dental rehabilitation based on dental implants. MATERIAL AND METHODS: 255 patients (151 women and 104 men) aged from 35 to 65 years were examined. 3 groups were formed: 2 study groups and a comparison group. Groups 1 and 2 included individuals with excess body weight and MS. The control group consisted of 88 people without MS. An index assessment of the condition of the periodontium and tissue structures of the alveolar bone (according to cone-beam computed tomography), microcirculation in the gingival mucosa was carried out using laser Doppler flowmetry. RESULTS: The analysis of the periodontal condition indicators showed that in all groups of patients with MS, periodontal pathology occurred, the value of which was significantly higher than in patients of the control group (p <0.05). The analysis of bone tissue according to CBCT data showed that the most favorable conditions (type 1 and type 2 of bone according to Misch) for dental implantation are found in people without MS, respectively 3.5% and 35.1% of cases. The intensity of blood flow (σ) was 21.2% lower in group 1 and 48% in group 2, compared with the control group. Vasomotor activity (Kv) was 13.2% lower in the first group and 35% lower in the second group. A decrease in amplitudes in the area of all rhythms in the LDF gram was found: low-frequency - by 15.6%, high-frequency - by 16.9%, pulse - by 3.6%. CONCLUSION: Changes occurring in the organs and tissues of the mouth against the background of MS of varying severity lead to a decrease in tissue perfusion with blood and blood flow activity, a local decrease in bone density, and as a result, pathological changes in periodontal tissues. Before performing dental rehabilitation, it is necessary to take into account all the risks of possible complications caused by the general condition of organs and systems of people with MS.

[Teeth autotransplantation as an alternative to dental implantation]. / Autotransplantatsiya zuba kak al'ternativa dental'noi implantatsii.

The stages of preoperative planning and surgical treatment of compromised teeth by the method of autotransplantation of a tooth are presented on the example of two clinical cases. The autotransplantation method can be considered an alternative to dental implantation when strictly adhering to the surgical protocol and careful selection of patients.

A study on the morphology of iliac crest based on the objectives of jaw bone defect reconstruction.

OBJECTIVES: to understand the morphological characteristics of iliac crest and provide advice and assistance for jaw bone reconstruction with iliac bone flap by evaluating the thickness and curvature of iliac crest. MATERIALS AND METHODS: 100 patients who had taken Spiral CT of the Abdominal region before surgeries between 2020 and 2022 were included in this study. 3D reconstruction images of the iliac bones were created. 5 vertical planes perpendicular to the iliac crest were made every 2 cm along the centerline of the iliac crest (VP2 ~ VP10). On these vertical planes, 4 perpendicular lines were made every 1 cm along the long axis of the iliac crest (D1 ~ D4). The thicknesses at these sites, horizontal angle (HA) of iliac crest and the distance between inflection point and the central point of anterior superior iliac spine (DIA) were measured. RESULTS: The thickness of iliac bone decreased significantly from D1 ~ D4 on VP6 ~ VP10 and from VP2 ~ VP10 on D3 and D4 level (P<0.05). HA of iliac crests was 149.13 ± 6.92°, and DIA was 7.36 ± 1.01 cm. Iliac bone thickness, HA and DIA had very weak or weak correlation with patient's age, height and weight. CONCLUSIONS: The average thicknesses of iliac crest were decreased approximately from front to back, from top to bottom. The thickness and curvature of the iliac crest were difficult to predict by age, height and weight. CLINICAL RELEVANCE: Virtual surgical planning is recommended before jaw bone reconstruction surgery with iliac bone flap, and iliac crest process towards alveolar process might be a better choice.

The influence of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implant.

OBJECTIVE: Aim: To study the specifics of the impact of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implantation protocol. PATIENTS AND METHODS: Materials and Methods: In the course of the study, orthopedic treatment was carried out for 55 patients aged 29 to 60 years. The following were performed: cone-beam computed tomography, software planning and intraoral scanning with an optical scanner, one-stage implantation protocol, assessment of implant stability with the Osstell ISQ device, microcirculation study in the peri-implant area using laser Doppler flowmetry (LDF). RESULTS: Results: It was established that around loaded implants there is an increase in blood flow and vasomotor activity of the microcirculatory channel of the supporting tissues, an increase in the volume of bone tissue and an increase in torque, which is the optimal forecast for the acceleration of the pace of osseointegration. CONCLUSION: Conclusions: The use of a splinting component during immediate intraoperative functional masticatory load accelerates the dynamics of bone tissue remodeling processes around the implant, which is an optimal prediction of osseointegration rates in various dental implantation protocols and is consistent with high values of the implant stability coefficient.

Short (≤6 mm) compared with ≥10-mm dental implants in different clinical scenarios: A systematic review of randomized clinical trials with meta-analysis, trial sequential analysis and quality of evidence grading.

AIM: To systematically identify, synthesize and critically summarize the available scientific evidence from randomized controlled trials (RCTs) regarding whether short (≤6 mm) perform as well as long (≥10 mm) implants regarding implant survival, marginal bone loss, and biologic and prosthetic complications in different clinical scenarios. MATERIALS AND METHODS: Cochrane Collaboration's risk of bias tool and the GRADE approach were applied. Results were synthesized using random-effects meta-analyses assessed by trial sequential analyses. RESULTS: Forty reports on 19 RCTs comprising 2214 (1097 short; 1117 long) implants were included. Moderate/high certainty/quality evidence demonstrated similar 5-year survival rates for ≤6-mm and ≥10-mm implants in non-augmented bone and full-mouth rehabilitation in either jaw, and for 6-mm implants in the maxilla instead of sinus lift. Nevertheless, the evidence for 5-year survival rates remains inconclusive or insufficient for the remaining combinations of implant lengths and clinical scenarios. They include 4-mm and 5-mm implants as alternatives to sinus lift as well as placing all implant lengths ≤6 mm instead of vertical ridge augmentation with long implants. Marginal bone level and short- and long-term biologic or prosthetic complications were similar. CONCLUSIONS: Based on moderate/high certainty/quality evidence from 5-year RCTs, implants ≤6 mm may be viable alternatives to ≥10-mm implants in either jaw in native bone and full-arch rehabilitation, and 6-mm implants may be used as an alternative to sinus lift. TRIAL REGISTRATION: PROSPERO ID: CRD42021254365.

Retrospective study of the deep circumflex iliac artery flap and the vascularized fibula free flap for maxillary defect repair.

OBJECTIVES: The deep circumflex iliac artery flap (DCIA) and vascularized fibular free flap (FFF) are mainstay flaps for maxillary defect reconstruction. This study compared the functional outcomes and success rates of these flaps to provide midface reconstruction strategies. MATERIALS AND METHODS: Maxillary defects reconstructed with DCIA or FFF at the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology between May 2016 and May 2023 were retrospectively analyzed. The length, width, and height of the grafted bone segments; intermaxillary distance; buttress reconstruction rate (BRR); dental arch reconstruction rate (DAR); success rate; and dental implantation rate were compared. RESULTS: The DCIA and FFF groups had 33 and 27 patients, respectively. Success rate in the DCIA group was 93.94 % and 100 % in the FFF group. The DCIA length was less than that of FFF; however, the width and height were significantly larger. 87.10 % of cases in the DCIA group were classified as Brown class b and c, 51.85 % of cases in the FFF group were classified as Brown class d. The average BRR in the DCIA group was 69.89 % ± 16.05 %, which was significantly higher than that in the FFF group. A total of 38.7 % and 11.1 % patients in the DCIA and FFF groups, respectively, had completed implantation. CONCLUSION: DCIA has a greater width and height, and is more suitable for repairing Brown class b and c defects, providing sufficient bone for implantation, while the FFF is longer and more suitable for Brown class d defect reconstruction.