Benzo[d]oxazoles from Anilides by N-Deprotonation-O-SNAr Cyclization.

A synthesis of benzo[d]oxazoles by an N-deprotonation-O-SNAr cyclization sequence from anilide precursors is reported. Anilides derived from 2-fluorobenzaldehydes, activated toward SNAr ring closure by C5 electron-withdrawing groups, were prepared and subjected to deprotonation-cyclization using 2 equiv. of K2CO3 in anhydrous DMF. Following deprotonation at nitrogen, the delocalized anion cyclized from the amide oxygen to give high yields of benzo[d]oxazoles. The temperature required for the cyclization of benzanilides correlated with the potency of the C5 activating group on the SNAr acceptor ring with nitro (most potent) reacting at 90 °C (1 h), cyano reacting at 115 °C (1 h), methoxycarbonyl reacting at 120 °C (2 h), and trifluoromethyl (least potent) reacting at 130 °C (3 h). Acetanilides were more difficult to cyclize but generally required 4-6 h at these same temperatures for completion. Product purification was accomplished by recrystallization or chromatography.

A water-resistant egg white/chitosan/pectin blending film with spherical-linear molecular interpenetrating network strengthened by multifunctional tannin-nisin nanoparticles.

Edible films are effective alternatives to plastic packaging, however, the hydrophilicity of edible films based on protein and polysaccharide limits the application. Therefore, we fabricated a water-stable hybrid film with a linear-spherical interpenetrating molecular topology network using egg white (EW), chitosan (CS), and pectin. Meanwhile, the nisin-tannin acid self-assembly complex nanoparticles were employed as a multifunctional cross-linker, antibacterial and antioxidant agent to improve the performance of films. The FTIR, XRD, and SEM analysis revealed that the conformation and crystalline structure rearrangement of chitosan induced by the alkaline environment provided by egg white enhanced the network structure of films, effectively avoided the addition of modifying reagents. The proposed hybrid films exhibited excellent properties, with EW/TNPCS3 showing the best overall performance. The water contact angle (WCA) increased to 105.27 ± 1.62°, and its dissolution and swelling rates were significantly lower than pure egg white and pure chitosan films. Moreover, tannin-nisin (TN) nanoparticles endowed the films with excellent antimicrobial activity against the common Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. Thus, the prepared blending films have great application potential in food preservation, especially to maintain stable performance in high humidity environment.

Reversible Local Protonation-Deprotonation: Tuning Stimuli-Responsive Circularly Polarized Luminescence in Chiral Hybrid Zinc Halides for Anti-Counterfeiting and Encryption.

Precise control over the organic composition is crucial for tailoring the distinctive structures and properties of hybrid metal halides. However, this approach is seldom utilized to develop materials that exhibit stimuli-responsive circularly polarized luminescence (CPL). Herein, we present the synthesis and characterization of enantiomeric hybrid zinc bromides: biprotonated ((R/S)-C12H16N2)ZnBr4 ((R/S-LH2)ZnBr4) and monoprotonated ((R/S)-C12H15N2)2ZnBr4 ((R/S-LH1)2ZnBr4), derived from the chiral organic amine (R/S)-2,3,4,9-Tetrahydro-1H-carbazol-3-amine ((R/S)-C12H14N2). These compounds showcase luminescent properties; the zero-dimensional biprotonated form emits green light at 505 nm, while the monoprotonated form, with a pseudo-layered structure, displays red luminescence at 599 and 649 nm. Remarkably, the reversible local protonation-deprotonation behavior of the organic cations allows for exposure to polar solvents and heating to induce reversible structural and luminescent transformations between the two forms. Theoretical calculations reveal that the lower energy barrier associated with the deprotonation process within the pyrrole ring is responsible for the local protonation-deprotonation behavior observed. These enantiomorphic hybrid zinc bromides also exhibit switchable circular dichroism (CD) and CPL properties. Furthermore, their chloride counterparts were successfully obtained by adjusting the halogen ions. Importantly, the unique stimuli-responsive CPL characteristics position these hybrid zinc halides as promising candidates for applications information storage, anti-counterfeiting, and information encryption.

Dynamics of ionized poly(4-hydroxystyrene)-type resist polymers with tert-butoxycarbonyl-protecting group.

The imaging reactions of resist materials used for nano-patterning have become radiation-chemical reactions, with the shortening of wavelengths of the exposure light sources in lithography systems. The most widely used patterning materials in industrial lithography are chemically amplified resists (CAR). Understanding the deprotonation mechanism of ionized polymers (radical cations) is important for acid generation in CARs. In this study, the dynamics of radical cations in poly(4-hydroxystyrene) (PHS)-type resist polymers, partially and totally protected by tert-butoxycarbonyl (t-BOC) groups, are investigated using a combination of electron pulse radiolysis experiments, acid yield measurements, and quantum chemical calculations. The t-BOC(oxy) group exhibits π-electron-donating behavior in the monomer cation but changes to electron-accepting behavior in the polymer cation, owing to the interaction between substituents. The destabilization of radical cations due to decreased intramolecular charge resonance may contribute to the high deprotonation efficiency of t-BOC-capped PHS polymers.

Regulating Water Adsorption Sites of Keto-Enamine COF by Base Exfoliation and Deprotonation for Enhanced Humidity Response.

Covalent organic framework (COF) has received much attention owing to its unique framework structure formed by diverse organic units. However, challenges, including low conductivity, structure instability, and limited control of adsorption and desorption processes, stimulate the modification of COF in electronic sensors. Herein, inspired by the alterable structure of COF in different solvents, a facile base exfoliation and deprotonation method is proposed to regulate the water adsorption sites and improve the intrinsic conductivity of TpPa-1 COF. TpPa-1 COF powders are exfoliated to nanosheets to increase water adsorption, while the deprotonation is utilized to adjust the affinity of water molecules on TpPa-1 COF framework, contributing to water accumulation in the 1D pores. The as-fabricated TpPa-1 COF sensor exhibits a decreased recovery time from 419 to 49 s, forming a linear relation between relative humidity (RH) value and humidity response. The excellent chemical stability of the covalent bond of TpPa-1 COF contributes to the excellent stable device performance in 30 days, promoting further integration and data analysis in respiration monitoring.

Protonation of palmitic acid embedded in DPPC lipid bilayers obscures detection of ripple phase by FTIR spectroscopy.

The transformation of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid bilayers from the gel (Lß') to the fluid (Lα) phase involves an intermediate ripple (Pß') phase forming a few degrees below the main transition temperature (Tm). While the exact cause of bilayer rippling is still debated, the presence of amphiphilic molecules, pH, and lipid bilayer architecture are all known to influence (pre)transition behavior. In particular, fatty acid chains interact with hydrophobic lipid tails, while the carboxylic groups simultaneously participate in proton transfer with interfacial water in the polar lipid region which is controlled by the pH of the surrounding aqueous medium. The molecular-level variations in the DPPC ripple phase in the presence of 2% palmitic acid (PA) were studied at pH levels 4.0, 7.3, and 9.1, where PA is fully protonated, partially protonated, or fully deprotonated. Bilayer thermotropic behavior was investigated by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR) spectroscopy which agreed in their characterization of (pre)transition at pH of 9.1, but not at pH 4.0 and especially not at 7.3. Owing to the different insertion depths of protonated and deprotonated PA, along with the ability of protonated PA to undergo flip-flop in the bilayer, these two forms of PA show a different hydration pattern in the interfacial water layer. Finally, these results demonstrated the hitherto undiscovered potential of FTIR spectroscopy in the detection of the events occurring at the surface of lipid bilayers that obscure the low-cooperativity phase transition explored in this work.

Axial Ligand Enables Synthesis of Allenylsilane through Dirhodium(II) Catalysis.

Described herein is a dirhodium(II)-catalyzed silylation of propargyl esters with hydrosilanes, using tertiary amines as axial ligands. By adopting this strategy, a range of versatile and useful allenylsilanes can be achieved with good yields. This reaction not only represents a SN2'-type silylation of the propargyl derivatives bearing a terminal alkyne moiety to synthesize allenylsilanes from simple hydrosilanes, but also represents a new application of dirhodium(II) complexes in catalytic transformation of carbon-carbon triple bond. The highly functionalized allenylsilanes that are produced can be transformed into a series of synthetically useful organic molecules. In this reaction, an intriguing ON-OFF effect of the amine ligand was observed. The reaction almost did not occur (OFF) without addition of Lewis base amine ligand. However, the reaction took place smoothly (ON) after addition of only catalytic amount of amine ligand. Detailed mechanistic studies and density functional theory (DFT) calculations indicate that the reactivity can be delicately improved by the use of tertiary amine. The fine-tuning effect of the tertiary amine is crucial in the formation of the Rh-Si species via a concerted metalation deprotonation (CMD) mechanism and facilitating ß-oxygen elimination.

Microencapsulation of vitamins: A review and meta-analysis of coating materials, release and food fortification.

Vitamins are responsible for providing biological properties to the human body; however, their instability under certain environmental conditions limits their utilization in the food industry. The objective was to conduct a systematic review on the use of biopolymers and lipid bases in microencapsulation processes, assessing their impact on the stability, controlled release, and viability of fortified foods with microencapsulated vitamins. The literature search was conducted between the years 2013-2023, gathering information from databases such as Scopus, PubMed, Web of Science and publishers including Taylor & Francis, Elsevier, Springer and MDPI; a total of 49 articles were compiled The results were classified according to the microencapsulation method, considering the following information: core, coating material, solvent, formulation, process conditions, particle size, efficiency, yield, bioavailability, bioaccessibility, in vitro release, correlation coefficient and references. It has been evidenced that gums are the most frequently employed coatings in the protection of vitamins (14.04%), followed by alginate (10.53%), modified chitosan (9.65%), whey protein (8.77%), lipid bases (8.77%), chitosan (7.89%), modified starch (7.89%), starch (7.02%), gelatin (6.14%), maltodextrin (5.26%), zein (3.51%), pectin (2.63%) and other materials (7.89%). The factors influencing the release of vitamins include pH, modification of the coating material and crosslinking agents; additionally, it was determined that the most fitting mathematical model for release values is Weibull, followed by Zero Order, Higuchi and Korsmeyer-Peppas; finally, foods commonly fortified with microencapsulated vitamins were described, with yogurt, bakery products and gummy candies being notable examples.

Coprecipitation of Fe/Cr Hydroxides at Organic-Water Interfaces: Functional Group Richness and (De)protonation Control Amounts and Compositions of Coprecipitates.

Iron/chromium hydroxide coprecipitation controls the fate and transport of toxic chromium (Cr) in many natural and engineered systems. Organic coatings on soil and engineered surfaces are ubiquitous; however, mechanistic controls of these organic coatings over Fe/Cr hydroxide coprecipitation are poorly understood. Here, Fe/Cr hydroxide coprecipitation was conducted on model organic coatings of humic acid (HA), sodium alginate (SA), and bovine serum albumin (BSA). The organics bonded with SiO2 through ligand exchange with carboxyl (-COOH), and the adsorbed amounts and pKa values of -COOH controlled surface charges of coatings. The adsorbed organic films also had different complexation capacities with Fe/Cr ions and Fe/Cr hydroxide particles, resulting in significant differences in both the amount (on HA > SA(-COOH) ≫ BSA(-NH2)) and composition (Cr/Fe molar ratio: on BSA(-NH2) ≫ HA > SA(-COOH)) of heterogeneous precipitates. Negatively charged -COOH attracted more Fe ions and oligomers of hydrolyzed Fe/Cr species and subsequently promoted heterogeneous precipitation of Fe/Cr hydroxide nanoparticles. Organic coatings containing -NH2 were positively charged at acidic pH because of the high pKa value of the functional group, limiting cation adsorption and formation of coprecipitates. Meanwhile, the higher local pH near the -NH2 coatings promoted the formation of Cr(OH)3. This study advances fundamental understanding of heterogeneous Fe/Cr hydroxide coprecipitation on organics, which is essential for successful Cr remediation and removal in both natural and engineered settings, as well as the synthesis of Cr-doped iron (oxy)hydroxides for material applications.

Versatile Deprotonation-Induced Exfoliation and Functionalization of Biological Nanofibrils for Actuation and Fluorescence.

Biological nanofibrils not only are characteristic of many species of biomasses but also serve as a promising type of sustainable nanomaterials for various applications. However, their production has long relied on an invasive and energy-consuming mechanical shear. A noninvasive and versatile approach remains challenging to exfoliate different types of biomasses into nanofibrils. In this study, we showed a versatile and nonaggressive intercalative deprotonation agent of organic base, which could efficiently deprotonate various biomasses for energy-saving exfoliation and functionalization, including cellulose, chitin, and silk. Both carboxylic nanofibrils and nanofibrils with pristine chemical structures could be produced in high yields through manual shaking or sonication. By further grafting photoresponsive groups via transesterification, intelligent NFs were generated featuring ultraviolet-responsive fluorescence and hydrophilicity. These responsive fluorescence and actuation behaviors promised their potential as green encryption and anticounterfeiting nanomaterials.

Palladium(II)-catalyzed annulation of N-methoxy amides and arynes: computational mechanistic insights and substituents effects.

CONTEXT: The combined use of transition metal-catalyzed C-H activation with aryne annulation reactions has emerged as an important strategy in organic synthesis. In this study, the mechanisms of the palladium(II)-catalyzed annulation reaction of N-methoxy amides and arynes were computationally investigated by density functional theory. The role of methoxy amide as a directing group was elucidated through the calculation of three different pathways for the C-H activation step, showing that the pathway where amide nitrogen acts as a directing group is preferable. At the reductive elimination transition state, an unstable seven-membered ring is formed preventing the lactam formation. A substituent effect study based on an NBO analysis, Hammet, and using a More O'Ferall-Jenks plot indicates that the C-H activation step proceeds via an electrophilic concerted metalation-deprotonation (eCMD) mechanism. The results show that electron-withdrawing groups increase the activation barrier and contribute to an early Pd-C bond formation and a late C-H bond breaking when compared with electron-donating substituents. Our computational results are in agreement with the experimental data provided in the literature. METHODS: All calculations were performed using Gaussian 16 software. Geometry optimizations, frequency analyses at 393.15 K, and IRC calculations were conducted at the M06L/Def2-SVP level of theory. Corrected electronic energies, NBO charges, and Wiberg bond indexes were computed at the M06L/Def2-TZVP//M06L/Def2-SVP level of theory. Implicit solvent effects were considered in all calculations using the SMD model, with acetonitrile employed as the solvent.

Visible Microfluidic Deprotonation for Aramid Nanofibers as Building Blocks of Cascade-Microfluidic-Processed Colloidal Aerogels.

 Microfluidic deprotonation approach is proposed to realize continuous, scalable, efficient, and uniform production of aramid nanofibers (ANFs) by virtue of large specific surface area, high mixing efficiency, strong heat transfer capacity, narrow residence time distribution, mild laminar-flow process, and amplification-free effect of the microchannel reactor. By means of monitoring capabilities endowed by the high transparency of the microchannel, the kinetic exfoliation process of original aramid particles is in situ observed and the corresponding exfoliation mechanism is established quantificationally. The deprotonated time can be reduced from the traditional several days to 7 min for the final colloidal dispersion due to the synergistic effect between enhanced local shearing/mixing and the rotational motion of aramid particles in microchannel revealed by numerical simulations. Furthermore, the cascade microfluidic processing approach is used to make various ANF colloidal aerogels including aerogel fibers, aerogel films, and 3D-printed aerogel articles. Comprehensive characterizations show that these cascade-microfluidic-processed colloidal aerogels have identical features as those prepared in batch-style mode, revealing the versatile use value of these ANFs. This work achieves significant progress toward continuous and efficient production of ANFs, bringing about appreciable prospects for the practical application of ANF-based materials and providing inspiration for exfoliating any other nano-building blocks.

Efficient Tin-Lead Perovskite Solar Cells with a Ultrawide Usage Windows of Precursor Solution Opened by SnF2.

High quality tin-lead perovskite solar cells (Sn─Pb PSCs) can be fabricated via simple solution processing methods. However, the instability of precursor solutions and their narrow usage windows still pose challenges in manufacturing efficient and reproducible Sn─Pb PSCs, hindering the commercialization of PSCs. Fluorine tin (SnF2) is widely used as an antioxidant to improve the crystallinity of perovskite. In this study, another role of SnF2 as a stabilizer is found to restrain the deprotonation of methylammonium iodide (MAI) in the precursor solution, which improves their stability and expands their usage windows. Due to the inhibition of SnF2 on oxidation and deprotonation, stable large-sized colloidal clusters form gradually in perovskite precursor solution during aging, leading to uniform nucleation/crystallization during film growth, significantly reducing the roughness and defect density in the films. Because of the competitive deprotonation and oxidation process of Sn2+, the benefit of larger cluster maximizes after about ten days storage of precursor solution. The champion efficiency of Sn─Pb PSCs prepared with 10 days aged precursor solution is 22.00%. High performance of devices fabricated with precursor solution stored for even ≈40 days discloses the wide usage windows of precursor solution with SnF2 additive.

Rapid Construction of Double Crystalline Prussian Blue Analogue Hetero-Superstructure.

The controllable construction of complex metal-organic coordination polymers (CPs) merits untold scientific and technological potential, yet remains a grand challenge of one-step construction and modulating simultaneously valence states of metals and topological morphology. Here, a thiocyanuric acid (TCA)-triggered strategy is presented to one-step rapid synthesis a double-crystalline Prussian blue analogue hetero-superstructure (PBA-hs) that comprises a Co3[Fe(CN)6]2 cube overcoated with a KCo[Fe(CN)6] shell, followed by eight self-assembled small cubes on vertices. Unlike common directing surfactants, TCA not only acts as a trigger for the fast growth of KCo[Fe(CN)6] on the Co3[Fe(CN)6]2 phase resulting in a PBA-on-PBA hetero-superstructure, but also serves as a flange-like bridge between them. By combining experiments with simulations, a deprotonation-induced electron transfer (DIET) mechanism is proposed for formation of second phase in PBA-hs, differing from thermally and photo-induced electron transfer processes. To prove utility, the calcined PBA-hs exhibits enhanced oxygen evolution reaction performance. This work provides a new method to design of novel CPs for enriching chemistry and material science. This work offers a practical approach to design novel CPs for enriching chemistry and material science.

Simultaneously decreasing arsenic and cadmium in rice by soil sulfate and limestone amendment under intermittent flooding.

Water management in paddy soils can effectively reduce the soil-to-rice grain transfer of either As or Cd, but not of both elements simultaneously due to the higher mobility of As under reducing and Cd under oxidizing soil conditions. Limestone amendment, the common form of liming, is well known for decreasing Cd accumulation in rice grown on acidic soils. Sulfate amendment was suggested to effectively decrease As accumulation in rice, especially under intermittent soil flooding. To study the unknown effects of combined sulfate and limestone amendment under intermittent flooding for simultaneously decreasing As and Cd in rice, we performed a pot experiment using an acidic sandy loam paddy soil. We also included a clay loam paddy soil to study the role of soil texture in low-As rice production under intermittent flooding. We found that liming not only decreased rice Cd concentrations but also greatly decreased dimethylarsenate (DMA) accumulation in rice. We hypothesize that this is due to suppressed sulfate reduction, As methylation, and As thiolation by liming in the sulfate-amended soil and a higher share of deprotonated DMA at higher pH which is taken up less readily than protonated DMA. Decreased gene abundance of potential soil sulfate-reducers by liming further supported our hypothesis. Combined sulfate and limestone amendment to the acidic sandy loam soil produced rice with 43% lower inorganic As, 72% lower DMA, and 68% lower Cd compared to the control soil without amendment. A tradeoff between soil aeration and water availability was observed for the clay loam soil, suggesting difficulties to decrease As in rice while avoiding plant water stress under intermittent flooding in fine-textured soils. Our results suggest that combining sulfate amendment, liming, and intermittent flooding can help to secure rice safety when the presence of both As and Cd in coarse-textured soils is of concern.

Metal Organic Frameworks Synthesis: The Versatility of Triethylamine.

Metal Organic Frameworks (MOFs) are organic-inorganic hybrid materials with exceptionally customizable composition and properties. MOFs intrinsically possess open metal sites, tunable pore size/shape and an ultra-large specific surface area, and have obtained significant attention over the past 30 years. Furthermore, through the integration of functional moieties such as, molecules, functional groups, noble metal clusters and nanocrystals or nanoparticles into MOFs, the resulting composites have greatly enriched the physical and chemical properties of pure MOFs, enabling their application in a wider range of fields. Triethylamine (TEA) as an organic base has consistently played a fundamental role in the development of MOFs. In this Concept, the versatility of triethylamine when involved in the synthesis of MOFs is discussed. Four sections are used to elaborate on the role of TEA including: (1) Single crystal synthesis; (2) Size and morphology control; (3) Counterion of MOFs; (4) MOFs composites synthesis. In the last part, we highlight the potential of TEA for further developments.

Controlling the Activation at NiII-CO2 2- Moieties through Lewis Acid Interactions in the Second Coordination Sphere.

Nickel complexes with a two-electron reduced CO2 ligand (CO2 2-, "carbonite") are investigated with regard to the influence alkali metal (AM) ions have as Lewis acids on the activation of the CO2 entity. For this purpose complexes with NiII(CO2)AM (AM=Li, Na, K) moieties were accessed via deprotonation of nickel-formate compounds with (AM)N(iPr)2. It was found that not only the nature of the AM ions in vicinity to CO2 affect the activation, but also the number and the ligation of a given AM. To this end the effects of added (AM)N(R)2, THF, open and closed polyethers as well as cryptands were systematically studied. In 14 cases the products were characterized by X-ray diffraction and correlations with the situation in solution were made. The more the AM ions get detached from the carbonite ligand, the lower is the degree of aggregation. At the same time the extent of CO2 activation is decreased as indicated by the structural and spectroscopic analysis and reactivity studies. Accompanying DFT studies showed that the coordinating AM Lewis acidic fragment withdraws only a small amount of charge from the carbonite moiety, but it also affects the internal charge equilibration between the LtBuNi and carbonite moieties.

DFT Exploration of Metal Ion-Ligand Binding: Toward Rational Design of Chelating Agent in Semiconductor Manufacturing.

Chelating agents are commonly employed in microelectronic processes to prevent metal ion contamination. The ligand fragments of a chelating agent largely determine its binding strength to metal ions. Identification of ligands with suitable characteristics will facilitate the design of chelating agents to enhance the capture and removal of metal ions from the substrate in microelectronic processes. This study employed quantum chemical calculations to simulate the binding process between eleven ligands and the hydrated forms of Ni2+, Cu2+, Al3+, and Fe3+ ions. The binding strength between the metal ions and ligands was quantified using binding energy and binding enthalpy. Additionally, we explored the binding interaction mechanisms and explained the differences in binding abilities of the eleven ligands using frontier molecular orbitals, nucleophilic indexes, electrostatic potentials, and energy decomposition calculations based on molecular force fields. Based on our computational results, promising chelating agent structures are proposed, aiming to guide the design of new chelating agents to address metal ion contamination issues in integrated circuit processes.

Over 19% Efficiency Perovskite Solar Modules by Simultaneously Suppressing Cation Deprotonation and Iodide Oxidation.

Perovskite solar cells (PSCs) based on sputtered nickel oxide (NiOx) hole transport layer have emerged as promising configuration due to their good stability, cost-effectiveness, and scalability. However, the adverse chemical redox reaction at the NiOx/perovskite interface remains an ever-present problem that has not yet been well solved. To address this issue before, the problems that cation deprotonation and iodide oxidation that occurred in precursor solution easily result in the interfacial chemical reaction should be prevented. Hence, we report an efficient strategy to simultaneously suppress the interfacial reaction and stabilize the precursor solution by incorporating a reducing and weakly acidic stabilizer, l-ascorbic acid (l-AA). l-AA can reduce I2 generated in the precursor solution and during the interfacial reaction to I-. Furthermore, the protons ionized by adjacent enol hydroxyl groups in l-AA effectively impede the deprotonation of organic cations in the precursor solution as well as at the NiOx/perovskite interface resulting from the chemical reaction. Attributing to the improved crystallization of the perovskite film and the suppression of the interfacial reaction by l-AA, the inverted PSC based on such good light absorber achieves an impressive power conversion efficiency (PCE) of 22.72% along with a high open-circuit voltage of 1.19 V. Notably, further introducing l-AA into the large-area solar modules by the slot-die coating method in air enables a remarkable PCE of 19.17%, which reaches one of the highest PCEs reported for inverted perovskite solar modules (PSMs) (active area >50 cm2) to date. l-AA located at the buried interface also forms a barrier layer that can prevent undesirable chemical reactions at the NiOx/perovskite interface, significantly enhancing the device stability of solar cells and PSMs. These findings in our work provide important guidance for improving the NiOx/perovskite interface and the fabrication of highly efficient, low-cost, and large-area PSMs.

Ultrathin heteroatom-doped CeO2 nanosheet assemblies for durable oxygen evolution: Oxygen vacancy engineering to trigger deprotonation.

The manipulation of oxygen vacancies (OVs) in metal oxides has progressively emerged as a versatile strategy for improving their catalytic performance. In this study, we aim to enhance the oxygen evolution reaction (OER) performance of cerium oxide (CeO2) by doping heteroatoms (Fe, Co, Ni) to generate additional OVs. We systematically analyzed both the morphology and electronic structure of the obtained CeO2 catalysts. The experimental results revealed the self-assembly of two-dimensional (2D) CeO2 nanosheets, with an approximate thickness of ∼1.7 nm, into 2D nanosheet assemblies (NSAs). Moreover, the incorporation of heteroatoms into the CeO2 matrix promoted the formation of OVs, resulting in a significant enhancement of the OER performance of CeO2. Among them, the Co-doped CeO2 NSAs sample displayed the highest activity and durability, with almost negligible activity loss during extended operating periods. The roles of heteroatom doping in improving OER activity were explored by DFT calculations. The produced OVs improve the adsorption of hydroxyl groups (OH-), promote the deprotonation process, and increase more active sites. These findings suggest that doping CeO2 with heteroatoms is a promising strategy for improving electrocatalytic OER activity, with great potential for the development of clean energy technologies, including but not limited to water splitting and fuel cells.