Biosensor Based on the Immobilization of Laccase on ß-Cyclodextrin Membrane for the Evaluation of Antioxidant Capacity in Real Samples.

The optimization of a new amperometric biosensor for evaluating antioxidant capacity in real samples is reported. The biosensor is based on the immobilization of Laccase from Trametes versicolor on an electropolymerized ß-cyclodextrin polymeric membrane on a glassy carbon electrode. The process of electropolymerization, which was successful even in the presence of the enzyme, was a key step in biosensor synthesis. Variables such as pH, temperature, and enzyme concentration were optimized using a factorial design with two levels for each factor. Different electrodes were constructed and tested using caffeic acid as a standard. The best biosensor is synthesized at pH 3.0 with 6 mg/mL of enzyme and 30 °C. The biosensor presented a response time of ≤30 seconds and good stability in its amperometric response. The biosensor was used to evaluate the antioxidant capacity of real samples. Infusions of green, black, red, and white tea were assessed. The biosensor showed excellent stability and good performance regarding response time, stability, and easy fabrication. The proposed biosensor is a good option for evaluating antioxidant capacity in real samples without sample pretreatment. It combines a simple fabrication methodology and a minimal extraction process for rapid and reliable phenolic content determination in real samples.

Electromimetic molecularly imprinted Polymersensor for wastewater emtricitabine.

BACKGROUND: Emtricitabine (FTC) is a commonly prescribed anti-human immunodeficiency virus (HIV) drug that has been classified as an emerging environmental pharmaceutical micropollutant due to its poor metabolism, refractory nature to wastewater treatment, continuous discharge with wastewater effluent and accumulation in the aquatic environment. Although there are no reported limits and toxicity of the drug in the environment yet, it is crucial to develop onsite, rapid, selective and ultrasensitive water sensing systems for FTC to ensure efficient risk management and environmental sustainability. RESULTS: Herein, a molecularly imprinted poly(para-aminobenzoic acid) (MIP) was electrochemically prepared on iron oxide nanoparticles modified glassy carbon electrode (MIP/Fe3O4 NPs/GCE) for selective detection of FTC using differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). During the detection, the voltammetric signal of the MIP sensor decreased with increasing concentrations of the non-electroactive FTC, indicating hindrance of the MIP sensor's redox activity by the binding analyte. The sensor generated a calibration curve with a linear dynamic range of 1.24-24.7 µg L-1 and a limit of detection (LOD) and limit of quantification (LOQ) of 0.439 and 1.30 µg L-1, respectively. Moreover, the MIP sensor was 5.2 times more sensitive than the control sensor, a non-imprinted polymer (NIP) sensor, and had a higher apparent binding affinity for FTC than the NIP sensor. The MIP/PABA-Fe3O4/GCE-based sensor achieved recoveries of 98.8 %-101.5 % for applications in real wastewater and drinking water samples. SIGNIFICANCE: The combination of Fe3O4 nanoparticles, electrically conducting polymer, and the MIP technology produced a novel, simple, cost-effective, and high-performance voltammetric MIP sensor for an anti-HIV drug, FTC. The result of this study shows that the sensor holds a significant promise for future onsite monitoring of emtricitabine in wastewater, pharmaceutical, and biological samples without prior sample pretreatment.

Highly stable scalable production of porous graphene-polydopamine nanocomposites for drug molecule sensing.

As atenolol overdosing can lead to severe health complications, the rapid detection of atenolol intake in point-of-care settings is highly desirable. The recent advancement of redox analytical methodologies has facilitated the efficacious quantification of these compounds for drug analysis, but their performance still presents challenges in practical applications. This study addresses these challenges by controlling the electropolymerization of polydopamine (PDA) on highly porous laser-induced graphene (LIG) electrodes with enhanced electrochemical redox activity for the detection of drug molecules such as atenolol, with minimized interference with the other active substances to induce variation of electrochemical behavior. The enhanced sensitivity of atenolol is attributed to the superhydrophilicity and increased number of active surface sites and -NH2 groups in the PDA polymer through a controlled polymerization process. Moreover, the simulation results further reveal that highly sensitive sensing of atenolol molecules relies on optimal adsorption of the atenolol molecule on dopamine or dopaminequinone structural units. The resulting sensors with high repeatability and reproducibility can achieve a low detection limit of 80 µM and a sensitivity of 0.020 ± 0.04 µA/µM within a linear range from 100 to 800 µM. The materials and surface chemistry in the electrode design based on highly porous LIG provide insights into the integration and application of future scalable and cost-effective electrochemical sensors for use in point-of-care or in-field applications.

An epitope imprinted electrochemical sensor for highly sensitive and selective determination of prostate-specific antigen.

A simple method for highly selective and sensitive prostate-specific antigen (PSA) detection using a molecularly imprinted electrochemical sensor is presented. The sensor was developed through an epitope imprinted strategy combined with electrochemical measurement techniques. An epitope molecularly imprinted polymer (EMIP) film was constructed on a AuNPs-coated gold electrode surface through electropolymerization, utilizing the C-terminus epitope of PSA (KWIKDTIVANP) as the template molecular and o-phenylenediamine as the functional monomer. The characteristics of EMIP film were investigated by using a scanning electron microscope and electrochemical test methods, including electrochemical impedance spectroscopy and cyclic voltammetry. Key parameters such as electropolymerization cycles, elution and rebinding times, and the molar ratio of template molecular to functional monomer were systematically optimized. The sensor demonstrated a detection limit (LOD) of 0.31 fg/mL and exhibited an excellent linear response towards PSA concentration ranging from 1.0 fg/mL to 0.1 µg/mL. Furthermore, the EMIP sensor showed excellent selectivity against other biological macromolecules, such as bovine serum albumin, human serum albumin, alpha-fetoprotein, and carcinoembryonic antigen. With recoveries between 95.89 and 106.04% for PSA detection in human serums the EMIP/AuNPs/AuE electrochemical sensor showed great potential in real sample analysis.

Enhanced Photovoltaic Performance of Poly(3,4-Ethylenedioxythiophene)Poly(N-Alkylcarbazole) Copolymer-Based Counter Electrode in Dye-Sensitized Solar Cells.

Conducting polymers are emerging as promising alternatives to rare and expensive platinum for counter electrodes in dye-sensitized solar cells; due to their ease of synthesis, they can be chemically tuned and are suitable for roll-to-roll production. Among these, poly (3,4-ethylenedioxythiophene) (PEDOT)-based counter electrodes have shown leading photovoltaic performance. However, certain conductivity issues remain that affect the effectiveness of these counter electrodes. In this study, we present an electropolymerized PEDOT and poly(N-alkylated-carbazole) copolymer as an efficient electrocatalyst for the reduction in I3- in dye-sensitized solar cells. Copolymerization with N-alkylated carbazoles significantly increases the conductivity of the polymer film and facilitates rapid charge transport at the interface between the polymer electrode and the electrolyte. The length of the alkyl substituents also plays a crucial role in this improvement. Electrochemical analysis showed a reduction in charge transport resistance from 3.31 Ω·cm2 for PEDOT to 2.26 Ω·cm2 for the PEDOT:poly(N-octylcarbazole) copolymer, which is almost half the resistance of a platinum-based counter electrode (4.12 Ω·cm2). Photovoltaic measurements showed that the solar cell with the PEDOT:poly(N-octylcarbazole) counter electrode achieved an efficiency of 8.88%, outperforming both PEDOT (7.90%) and platinum-based devices (7.57%).

A novel method for quality evaluation of Radix Angelica sinensis based on molecularly imprinted electrochemical sensor.

Rapid and sensitive detection of n-butylidenephthalide (NBP) is crucial for quality control of Radix Angelica Sinensis (RAS) and its related pharmaceuticals due to their shared pharmacological effects, such as immune enhancement and anti-tumor properties. Current detection methods struggle to quantify NBP quickly and accurately. A molecularly imprinted polymer (MIP)-based electrochemical sensor has been developed, forming a film on PCN-222(Fe) via electropolymerization for the rapid and selective detection of NBP. o-Phenylenediamine (o-PD) was polymerized onto PCN-222(Fe), utilizing its high surface area and porous structure to create a high-performance MIP (MIP/PCN-222(Fe)) sensor. This sensor detects NBP binding at the molecularly imprinted sites through a redox probe, with current changes reflecting the NBP content in the sample. This sensor exhibits a strong affinity for NBP, with a linear detection range from 200 nM to 1 mM, a detection limit of 76 nM, and high specificity towards similar phthalide compounds. Experimental results show that the MIP/PCN-222(Fe) sensor can accurately quantify NBP in real samples, offering a simplified method with promising applications for RAS quality evaluation.

Polynorepinephrine and polydopamine-bacterial laccase coatings for phenolic amperometric biosensors.

The successful fabrication of biosensors is greatly limited by the immobilization of their bioreceptor, thus we propose a facile and reproducible two-step method to modify graphite electrodes with a bacterial laccase, relying on a fast and controllable potentiostatic process to coat graphite surfaces with biomolecule-compatible thin films of polynorepinephrine (ePNE) and polydopamine (ePDA). Both polymers, synthesized with a similar thickness, were functionalized with bacterial laccase, displaying distinct electrochemical transducing behaviours at pH 5.0 and 7.0. ePNE layer enables adequate electron transfer of anionic and cationic species in acidic and neutral media, whereas transduction across ePDA strongly depends on pH and redox probe charge. ePNE stands out by improving the amperometric responses of the biosensing interface towards a phenolic acid (gallic acid) and a flavonoid (catechin), in respect to ePDA. The optimal graphite/ePNE/laccase interface outperforms biosensing interfaces based on fungal laccases at neutral pH, displaying detection sensitivities of 104 and 14.4 µA cm-2 mM-1for gallic acid and catechin, respectively. The fine synthetic control of the ePNE bio-inspired transduction layer and the use of an alkaliphilic bacterial laccase enabled the construction of an amperometric biosensing interface with extended pH range of polyphenols detection present in food products and agro-industrial waste.

The Positional Effect of an Immobilized Re Tricarbonyl Catalyst for CO2 Reduction.

The storage of renewable energy through the conversion of CO2 to CO provides a viable solution for the intermittent nature of these energy sources. The immobilization of rhenium(I) tricarbonyl molecular complexes is presented through the reductive coupling of bis(diazonium) aryl substituents. The heterogenized complex was characterized through ultra-visible, attenuated total reflectance, infrared reflection absorption spectroscopy, and X-ray photoelectron spectroscopy to probe the electronic structure of the immobilized complex. In addition, studies of cyclic voltammetry, controlled potential electrolysis, and electrochemical impedance spectroscopy were conducted to examine the CO2 reduction activity. The structure and CO2 reduction performance were compared with a previously reported immobilized rhenium(I) tricarbonyl molecular complex to probe the effect of varying the tethering of the aryl substituent from the 5,5'-position to the 4,4'-position of the 2,2'-bipyridine backbone. The immobilized complex on carbon cloth at the 4,4'-position provided excellent selectivity (FECO > 99%) and maximum TONCO and TOFCO values of 3359 and 0.9 s-1, respectively, without the addition of a BroÌ·nsted acid source. A nonaqueous flow cell demonstrated the stability of this complex during a 5 h electrolysis. Tethering at the 4,4'-position, compared to the 5,5'-position, yielded lower overall activity for CO2 reduction and was attributed to the difference in growth morphology and formation of aggregations, due to Re-Re dimer formation and π-π stacking interactions within the metallopolymer matrix. For carbon cloth substrates, an optimized catalyst loading was determined to be 44.6 ± 11 nmol/cm2.

Theoretical screening and electrochemical sensor for determination of norepinephrine using a molecularly imprinted poly (3-amiophenylboronic acid).

Norepinephrine (NE) is the primary catecholamine (CA) of interest in the medical field, as it plays a key role in regulating the hormonal and neurological systems. Some NE concentration dysfunction can lead to a number of serious physical conditions. As a result, quick and sensitive NE detection is most critical in medical technology. Thus, in this research, a molecularly imprinted polymer (MIP) was used to create an electrochemical sensor for the selective detection of NE. Prior to this, functional monomers were chosen through molecular modeling utilizing molecular mechanics and quantum mechanics computations. According to these studies, the 3-aminophenylboronic acid (3-APBA) functional monomer produces the most stable complex with NE in molecular modeling calculations. Based on this, by electropolymerizing 3-APBA in the presence of the template molecule NE, an imprinting polymer film is formed on the screen-printed carbon electrode (SPCE) surface. Stepwise fabrication of imprinted polymer films was examined through differential pulse voltammetry (DPV), cyclic voltammetry (CV), scanning electron microscopy (SEM), and electrochemical impedance spectroscopy (EIS). The performance of the electrochemical NE sensor removal and rebinding levels of the template was studied and optimized. The selectivity for NE was confirmed by using interference studies of small molecules like dopamine, tyrosine, and serotonin. Under optimum levels, the fabricated MIP sensor had a broad linear range over NE concentrations of 0.1 pM-5 pM; sensitivity: 0.004 mA pM-1; limit of detection: 0.03 pM. It is noteworthy that the newly created MIP sensor was effectively validated for NE detection in plasma samples.

Electrochemical and Optical Properties of D-A-A-A-D Azomethine Triad and Its NIR-Active Polymer.

The azomethine TPA-(BTZ)3-TPA with a donor-acceptor-acceptor-acceptor-donor structure has been synthesized and characterized. Azomethine TPA-(BTZ)3-TPA exhibited luminescence properties and a positive solvatochromic effect. Electropolymerization on terminated triphenylamine groups was used to obtain a thin layer of the polyazomethine poly-[TPA-(BTZ)3-TPA]. Further investigation of oxidation/reduction properties of poly-[TPA-(BTZ)3-TPA] via cyclic voltammetry showed that the polymer undergoes two reversible oxidation/reduction processes due to the presence of tetraphenylbenzidine moieties. Electrochromic properties of the polyazomethine poly-[TPA-(BTZ)3-TPA] were investigated via spectroelectrochemistry. It was observed that the polymer in its neutral state is orange, and the color changes to green upon electro-oxidation. The stability of the polymer during multiple oxidation/reduction cycles, response times, and coloration efficiency were also investigated.

Comparison between Electropolymers of 3,5-Dihydroxybenzoic Acid and 2',6'-Dihydroxyacetophenone in Dimethyl Sulfoxide and Their Analytical Performance towards Selected Analytes with the Role of the Washing Liquid.

In the first part of this study, the electrochemical polymerization of two compounds, 3,5-dihydroxybenzoic acid and 2',6'-dihydroxyacetophenone, was compared in dimethyl sulfoxide solvent on platinum and glassy carbon electrodes. The voltammograms obtained showed remarkable differences between the two monomers and between the two electrode materials. The acetophenone derivative formed electropolymer remnants at the electrodes, while in the case of the benzoic acid derivative, practically no passivation occurred, and the scanning electron microscopic results reinforced this. A few stackings adsorbed only after electropolymerization from a highly concentrated solution of dihydroxybenzoic acid. As a modifying layer on the platinum and glassy carbon electrodes, the prepared films from 2',6'-dihydroxyacetophenone were tested for tributylamine in acetonitrile and in an aqueous solution of a redox-active compound, hydroquinone, during the stirring of the solution. More stable amperometric current signals could be reached with modified platinum than with glassy carbon, and the significant influence of the organic washing liquid after deposition was established via the study of noise level. In this respect, acetone was the best choice. The amperometric signals with the modified platinum obtained upon the addition of aliquots of the stock solution resulted in a 3.29 µM detection limit.

Donor-acceptor-donor type AIEgens based on thieno[3.4-c]pyrrole-4,6-dione: Synthesis, electropolymerization, and electrochromism.

Photoelectric functional materials with electrochemical reversible activity and fluorescence intensities have attracted significant interest due to their wide range of applications in optoelectronic devices. In this work, a series of photoresponsive and electroactive monomers based on thieno[3.4-c]pyrrole-4,6-dione (TPD) are synthesized and characterized. They possess planar geometry with smaller dihedral angles owing to the existence of a noncovalent conformation lock coming from the S atoms and the O atoms. Crystallographic, spectroscopic, and computational results reveal that the introduction of the TPD unit can endow the monomers with aggregation-induced emission (AIE), reduced energy levels, and increased electrochemical activity. The monomers were successfully polymerized through the electrochemical method, and the corresponding polymers displayed reversible electrochemical activity and stability. Moreover, polymer films based on 3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine (ProE)-TPD have electrochromic properties in the near-infrared field with a high value of optical contrast ratio (∆T) of 27.1% at 1000 nm.

Real samples sensitive dopamine sensor based on poly 1,3-benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)acetonitrile on a glassy carbon electrode.

Herein, a novel electrochemical sensor that was used for the first time for sensitive and selective detection of dopamine (DA) was fabricated. The new sensor is based on the decoration of the glassy carbon electrode surface (GC) with a polymer film of 1,3-Benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)) acetonitrile (poly(BTCA). The prepared (poly(BTCA) was examined by using different techniques such as 1H NMR, 13C NMR, FTIR, and UV-visible spectroscopy. The electrochemical investigations of DA were assessed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results obtained showed that the modifier increased the electrocatalytic efficiency with a noticeable increase in the oxidation peak current of DA in 0.1 M phosphate buffer solution (PBS) at an optimum pH of 7.0 and scan rate of 200 mV/s when compared to unmodified GC. The new sensor displays a good performance for detecting DA with a limit of detection (LOD 3σ), and limit of quantification (LOQ 10σ) are 0.28 nM and 94 nM respectively. The peak current of DA is linearly proportional to the concentration in the range from 0.1 to 10.0 µM. Additionally, the fabricated electrode showed sufficient reproducibility, stability, and selectivity for DA detection in the presence of different interferents. The proposed poly(BTCA)/GCE sensor was effectively applied to detect DA in the biological samples.

Rapid and High-Density Antibody Immobilization Using Electropolymerization of Pyrrole for Highly Sensitive Immunoassay.

Polypyrrole (Ppy) is a biologically compatible polymer that is used as a matrix, in which drugs and enzymes can be incorporated by doping. Here, we suggest an inventive application of Ppy as a biorecognition film encapsulated with an antibody (Ab) as an alternative strategy for the on-site multistep functionalization of thiol-based self-assembled monolayers. The fabrication steps of the recognition films were followed by dropping pyrrole and Ab mixed solutions onto the electrode and obtaining a thin film by direct current electropolymerization. The efficiency of Ab immobilization was studied by using fluorescence microscopy and electrochemical (EC) methods. Finally, the Ab density was increased and immobilized in 1 min, and the sensing performance as an EC immunosensor was demonstrated using α-fetoprotein with a limit of detection of 3.13 pg/mL and sensing range from 1 pg/mL to 100 ng/mL. This study demonstrates the potential for electrochemical functionalization of biomolecules with high affinity and rapidity.

Binary and Ternary Deep Eutectic Solvents for Methylene Green Electropolymerization on Multiwalled Carbon Nanotubes: Optimization, Characterization and Application.

Choline chloride (ChCl) based binary and ternary deep eutectic solvents (DES) were evaluated for methylene green electropolymerization with oxalic acid (OA) and ethylene glycol (EG) as hydrogen bond donors. Binary DES ChCl : OA in molar ratios 1 : 1 and 2 : 1 and ChCl : EG 1 : 2 and ternary DES (tDES) in different molar ratios and percentages of water were evaluated. The highest polymer growth was in ChCl : OA : EG-tDES with 13% added water, that had a lower viscosity and higher ionic conductivity when associated with HCl as dopant. This enhanced the formation of more cation radicals and, consequently, more polymer formation. The PMG/MWCNT/GCE-tDES sensor was successfully applied to the simultaneous determination of 5-aminosalicylic acid (5-ASA) and acetaminophen (APAP) by differential pulse voltammetry in the concentration range 1 µM-200 µM, with detection limits of 0.37 µM and 0.49 µM for 5-ASA and APAP, respectively. The sensor demonstrated good repeatability, reproducibility and stability, and was successfully applied in pharmaceutical formulations.

One-Shot Remote Integration of Macromolecular Synaptic Elements on a Chip for Ultrathin Flexible Neural Network System.

The field of biomimetic electronics that mimic synaptic functions has expanded significantly to overcome the limitations of the von Neumann bottleneck. However, the scaling down of the technology has led to an increasingly intricate manufacturing process. To address the issue, this work presents a one-shot integrable electropolymerization (OSIEP) method with remote controllability for the deposition of synaptic elements on a chip by exploiting bipolar electrochemistry. Condensing synthesis, deposition, and patterning into a single fabrication step is achieved by combining alternating-current voltage superimposed on direct-current voltage-bipolar electropolymerization and a specially designed dual source/drain bipolar electrodes. As a result, uniform 6 × 5 arrays of poly(3,4-ethylenedioxythiophene) channels are successfully fabricated on flexible ultrathin parylene substrates in one-shot process. The channels exhibited highly uniform characteristics and are directly used as electrochemical synaptic transistor with synaptic plasticity over 100 s. The synaptic transistors have demonstrated promising performance in an artificial neural network (NN) simulation, achieving a high recognition accuracy of 95.20%. Additionally, the array of synaptic transistor is easily reconfigured to a multi-gate synaptic circuit to implement the principles of operant conditioning. These results provide a compelling fabrication strategy for realizing cost-effective and disposable NN systems with high integration density.

Electropolymerization of a Carbonyl-Modified Dihydropyrazine Derivative for Aqueous Zinc Batteries with Ultrahigh Cycling Stability.

The design of aqueous zinc-ion batteries (ZIBs) that have high specific capacity and long-term stability is essential for future large-scale energy storage systems. Cathode materials with extended π-conjugation and abundant active sites are desirable to enhance the charge storage performance and the cycling stability of the aqueous ZIB. Based on this concept, 6,9-dihydropyrazino[2,3-g]quinoxaline-2,3,7,8(1H,4H)-tetrone was chosen as the monomer to be electropolymerized onto carbon cloth (PDHPQ-Tetrone/CC). When used as the cathode material for aqueous ZIBs, an exceptional cycling life (>20,000 cycles) at a current density of 10 A g-1 was achieved, with the specific capacity maintained at 82.8% and with the Coulombic efficiency at around 100% throughout cycling. At the charge-discharge current density of 0.1 A g-1, the ZIB with PDHPQ-Tetrone/CC achieved a high specific capacity of 248 mAh g-1. Kinetic analyses showed that both surface-capacitive-controlled processes and semi-infinite diffusion-controlled processes contribute to the stored charge. The charge storage mechanism was investigated with ex situ characterizations and involves the redox processes of carbonyl/hydroxyl and amino/imino groups coupled with insertion and extraction of both Zn2+ and H+.

A molecularly imprinted electrochemical sensor MIP/Cu-MOF/rGO/AuNPs/GCE for highly sensitive detection of electroneutral organophosphorus pesticide residues.

A novel electrochemical sensor, MIP/Cu-MOF/rGO/AuNPs/GCE, was developed by depositing gold nanoparticles, coating Cu-MOF/GO on the surface of glassy carbon electrode (GCE) before electroreducing graphene oxide (GO) to rGO and covering molecularly imprinted membrane by electropolymerization for highly sensitive detection of electroneutral organophosphorus pesticide residues in agricultural product. Cyclic voltammetry, differential pulse voltametry, scanning electron microscopy, energy-dispersive spectroscopy, and atomic force microscopy were used to characterize the imprinted sensor. Several key factors such as chitosan concentration, suspension volume, pH of polymerization solution, and polymerization scanning rate during preparation of the imprinted sensor were optimized in detail. When electroneutral phosmet was used as a template, the linear range of MIP/Cu-MOF/rGO/AuNPs/GCE for detecting phosmet was 1.00 × 10-14-5.00 × 10-7 mol/L with the limit of detection of 7.20 × 10-15 mol/L at working potentials of - 0.2 to 0.6 V. The selectivity, reproducibility, and repeatability of MIP/Cu-MOF/rGO/AuNPs/GCE were all acceptable. The recoveries of this method for determining phosmet in real samples ranged from 94.2 to 106.5%. The MIP/Cu-MOF/rGO/AuNPs/GCE sensor could be applied to detect electroneutral pesticide residues in organisms and agricultural products.

Electrochemical Behavior of Janus Kinase Inhibitor Ruxolitinib at a Taurine-Electropolymerized Carbon Paste Electrode: Insights into Sensing Mechanisms.

Ruxolitinib (RXL) is a Janus kinase inhibitor used for treating intermediate- or high-risk myelofibrosis. This study presents an electrode modified with electrochemically polymerized taurine on a carbon paste electrode via cyclic voltammetry (CV). The surface characterization of the poly(taurine)-CP electrode was evaluated by using electrochemical (electrochemical impedance spectroscopy─EIS, CV), morphological (scanning electron microscope─SEM), and spectroscopic (Fourier-transform infrared spectroscopy─FT-IR) techniques. Under optimized conditions, RXL exhibited good linearity within the 0.01-1.0 µM concentration range, with a limit of detection (LOD) of 0.005 µM. The proposed electrochemical sensor demonstrated excellent selectivity, accuracy, precision, and repeatability. Furthermore, it effectively detected RXL in human urine and pharmaceutical samples.

Electrochemical determination of fenitrothion pesticide based on ultrathin manganese oxide nanowires/molybdenum titanium carbide MXene ionic nanocomposite and molecularly imprinting polymer.

A novel molecularly imprinted electrochemical sensor is presented based on one-dimensional ultrathin manganese oxide nanowires/two-dimensional molybdenum titanium carbide MXene (MnO2NWs@Mo2TiC2 MXene) for fenitrothion (FEN) determination. After the synthesis of MnO2NWs@Mo2TiC2 MXene ionic nanocomposite was successfully completed with a facile hydrothermal and the pillaring methods, a new type molecular imprinted electrochemical sensor based on MnO2NWs@Mo2TiC2 MXene was constructed with cyclic voltammetry (CV) polymerization including pyrrole monomer and FEN target molecule. After the characterization studies including spectroscopic, electrochemical and microscopic methods, the analytical applications of the prepared sensor were performed. A linearity of 1.0×10-9-2.0×10-8 mol L-1 was obtained and the values of the quantification limit (LOQ) and the detection limit (LOD) were 1.0×10-9 mol L-1 and 3.0×10-10 mol L-1, respectively. The studies of selectivity, stability and reproducibility of the constructed sensor based on MnO2NWs@Mo2TiC2 nanocomposite and molecularly imprinting polymer (MIP) were carried out in detail. Finally, the developed sensor was applied to white flour samples with the values close to 100%.