Review of research progress on the production of cellulase from filamentous fungi.

Cellulases have been widely used in many fields such as animal feed, textile, food, lignocellulose bioconversion, etc. Efficient and low-cost production of cellulases is very important for its industrial application, especially in bioconversion of lignocellulosic biomass. Filamentous fungi are currently widely used in industrial cellulase production due to their ability to secrete large amounts of active free cellulases extracellularly. This review comprehensively summarized the research progress on cellulases from filamentous fungi in recent years, including filamentous fungi used for cellulase production and its modification strategies, enzyme compositions, characterization methods and application of fungal cellulase systems, and the production of fungal cellulase includes production processes, factors affecting cellulase production such as inducers, fermentation medium, process parameters and their control strategies. Also, the future perspectives and research topics in fungal cellulase production are presented in the end of the review. The review helps to deepen the understanding of the current status of fungal cellulases, thereby promoting the production technology progress and industrial application of filamentous fungal cellulase.

Dry gel spinning of fungal hydrogels for the development of renewable yarns from food waste.

BACKGROUND: Renewable materials made using environmentally friendly processes are in high demand as a solution to reduce the pollution created by the fashion industry. In recent years, there has been a growing trend in research on renewable materials focused on bio-based materials derived from fungi. RESULTS: Recently, fungal cell wall material of a chitosan producing fungus has been wet spun to monofilaments. This paper presents a modification for the fungal monofilament spinning process, by the development of a benign method, dry gel spinning, to produce continuous monofilaments and twisted multifilament yarns, from fungal cell wall, that can be used in textile applications. The fungal biomass of Rhizopus delemar, grown using bread waste as a substrate, was subjected to alkali treatment with a dilute sodium hydroxide solution to isolate alkali-insoluble material (AIM), which mainly consists of the fungal cell wall. The treatment of AIM with dilute lactic acid resulted in hydrogel formation. The morphology of the hydrogels was pH dependent, and they exhibited shear thinning viscoelastic behavior. Dry gel spinning of the fungal hydrogels was first conducted using a simple lab-scale syringe pump to inject the hydrogels through a needle to form a monofilament, which was directly placed on a rotating receiver and left to dry at room temperature. The resulting monofilament was used to make twisted multifilament yarns. The process was then improved by incorporating a heated chamber for the quicker drying of the monofilaments (at 30°C). Finally, the spinning process was scaled up using a twin-screw microcompounder instead of the syringe pump. The monofilaments were several meters long and reached a tensile strength of 63 MPa with a % elongation at break of 14. When spinning was performed in the heated chamber, the tensile strength increased to 80 MPa and further increased to 103 MPa when a micro-compounder was used for spinning. CONCLUSION: The developed dry gel spinning method shows promising results in scalability and demonstrates the potential for renewable material production using fungi. This novel approach produces materials with mechanical properties comparable to those of conventional textile fibers.

Patent landscape analysis for materials based on fungal mycelium: a guidance report on how to interpret the current patent situation.

BACKGROUND: Recent advancements in the collaboration between two scientific disciplines-fungal biotechnology and materials sciences-underscore the potential of fungal mycelium as renewable resource for sustainable biomaterials that can be harnessed in different industries. As fungal mycelium can be biotechnologically obtained from different filamentous fungi and is as a material very versatile, respective research and commercial application should be thriving. However, some granted patents in the field of fungal mycelium-based materials have caused uncertainty in the community as to which subject matter is patent-protected and for how long the protection is expected to last. RESULTS: This opinion paper therefore maps the patent landscape of fungal mycelium-based materials with a specific focus on technical applications including building construction, insulation, packaging, and the like. We provide an overview of granted patents (73) and pending applications (34) related to granted patents, the dominant patent portfolios (five, with the number of patents and/or applications per owner between six and 44), the patent owners, and highlight the key claims formulated to protect the inventions. Additionally, we outline various options towards an increased activity in the field. CONCLUSION: Patent developments in the field leave the impression that fungal materials, despite their high potential as renewable and biodegradable materials, have been held back due to patent over-protection. Considering the need for replacing current petroleum-based materials with renewable biomaterials, coordinated efforts may be called for to intensify efforts in the field.

Identification of Food Spoilage Fungi Using MALDI-TOF MS: Spectral Database Development and Application to Species Complex.

Fungi, including filamentous fungi and yeasts, are major contributors to global food losses and waste due to their ability to colonize a very large diversity of food raw materials and processed foods throughout the food chain. In addition, numerous fungal species are mycotoxin producers and can also be responsible for opportunistic infections. In recent years, MALDI-TOF MS has emerged as a valuable, rapid and reliable asset for fungal identification in order to ensure food safety and quality. In this context, this study aimed at expanding the VITEK® MS database with food-relevant fungal species and evaluate its performance, with a specific emphasis on species differentiation within species complexes. To this end, a total of 380 yeast and mold strains belonging to 51 genera and 133 species were added into the spectral database including species from five species complexes corresponding to Colletotrichum acutatum, Colletotrichum gloeosporioides, Fusarium dimerum, Mucor circinelloides complexes and Aspergillus series nigri. Database performances were evaluated by cross-validation and external validation using 78 fungal isolates with 96.55% and 90.48% correct identification, respectively. This study also showed the capacity of MALDI-TOF MS to differentiate closely related species within species complexes and further demonstrated the potential of this technique for the routine identification of fungi in an industrial context.

Fungal Biodeterioration Risk in Monastic Libraries without Climate Control.

Fungi have always posed an unquestionable threat to heritage collections worldwide. Now, in a future of climate change, biological risk factors may have to be considered even more than before. Models and simulations to assess possible impacts a changing outdoor climate will have on indoor environments and, in turn, on biodeterioration are still underdeveloped and require a more substantial data basis. This study aimed at filling some of these knowledge gaps through a broad-based approach combining microclimatic and microbiological monitoring in four historic libraries in Austria with an uncontrolled indoor climate: Altenburg Abbey, Melk Abbey, Klosterneuburg Monastery and the Capuchin Monastery in Vienna. Data were generated from thermohygrometric sensors, cultivation-dependent air- and surface sampling and further surface dust sampling for cultivation-independent analyses. Results gave insights on the status quo of microbiological loads in the libraries and outdoor-indoor relationships. Influences of the geographic location and room-use on corresponding indoor fungal profiles were identified. Lower fungal diversities were found at the most rural site with the strongest climatic fluctuations and extreme values than in the most urban, sheltered library with a very stable climate. Further, the humidity-stabilizing potential of large collections of hygroscopic materials, such as books, was also examined. Implications for a sustainable approach to prevent future biodeterioration are discussed, supporting the long-term preservation of these valuable historic collections.

Treatment Strategies for Filamentous Fungi Keratitis.

INTRODUCTION: This research aims to describe clinical findings, epidemiology and treatment outcomes in patients with filamentous fungi keratitis of a tertiary centre in Germany over a 7-year period and to compare the efficacy of different antifungal treatments and the effect of additive topical steroids. METHODS: This retrospective study included 25 eyes of 23 patients from October 2013 to December 2020 with cultural isolates of filamentous fungi and corresponding keratitis. Best-corrected visual acuity (BCVA), clinical signs, symptoms, risk factors and outcome were extracted from medical records. RESULTS: Improvement of BVCA was noted in 68% of eyes. Mean BCVA of the study population increased from 0.75 logMAR [median 0.40, standard deviation (SD) 0.82, range 0-2.3] to 0.48 logMAR (median 0.10, SD 0.88, range - 0.1 to 3). The most commonly used antifungal topical treatment was a combination of natamycin 5% and voriconazole 2% (44% of eyes), followed by voriconazole 2% in 36% of cases. An antiinflammatory topical steroid was applied in 52%. In 16% of the eyes, penetrating keratoplasty (pKP) was performed. CONCLUSION: Diagnosis of filamentous fungi keratitis is often difficult or delayed. Outcomes can be poor even with intensive treatment because of high resistance to common antifungals. Access to natamycin 5% seems to lead to favourable outcomes in filamentous fungi keratitis.

Increasing the efficiency of CRISPR/Cas9-mediated genome editing in the citrus postharvest pathogen Penicillium digitatum.

BACKGROUND: Penicillium digitatum is a fungal plant pathogen that causes the green mold disease in harvested citrus fruits. Due to its economical relevance, many efforts have focused on the development of genetic engineering tools for this fungus. Adaptation of the CRISPR/Cas9 technology was previously accomplished with self-replicative AMA1-based plasmids for marker-free gene editing, but the resulting efficiency (10%) limited its practical implementation. In this study, we aimed to enhance the efficiency of the CRISPR/Cas9-mediated gene editing in P. digitatum to facilitate its practical use. RESULTS: Increasing the culture time by performing additional culture streaks under selection conditions in a medium that promotes slower growth rates significantly improved the gene editing efficiency in P. digitatum up to 54-83%. To prove this, we disrupted five candidate genes that were chosen based on our previous high-throughput gene expression studies aimed at elucidating the transcriptomic response of P. digitatum to the antifungal protein PdAfpB. Two of these genes lead to visual phenotypic changes (PDIG_53730/pksP, and PDIG_54100/arp2) and allowed to start the protocol optimization. The other three candidates (PDIG_56860, PDIG_33760/rodA and PDIG_68680/dfg5) had no visually associated phenotype and were targeted to confirm the high efficiency of the protocol. CONCLUSION: Genome editing efficiency of P. digitatum was significantly increased from 10% to up to 83% through the modification of the selection methodology, which demonstrates the feasibility of the CRISPR/Cas9 system for gene disruption in this phytopathogenic fungus. Moreover, the approach described in this study might help increase CRISPR/Cas9 gene editing efficiencies in other economically relevant fungal species for which editing efficiency via CRISPR/Cas9 is still low.

Synthetic biology for Monascus: From strain breeding to industrial production.

Traditional Chinese food therapies often motivate the development of modern medicines, and learning from them will bring bright prospects. Monascus, a conventional Chinese fungus with centuries of use in the food industry, produces various metabolites, including natural pigments, lipid-lowering substances, and other bioactive ingredients. Recent Monascus studies focused on the metabolite biosynthesis mechanisms, strain modifications, and fermentation process optimizations, significantly advancing Monascus development on a lab scale. However, the advanced manufacture for Monascus is lacking, restricting its scale production. Here, the synthetic biology techniques and their challenges for engineering filamentous fungi were summarized, especially for Monascus. With further in-depth discussions of automatic solid-state fermentation manufacturing and prospects for combining synthetic biology and process intensification, the industrial scale production of Monascus will succeed with the help of Monascus improvement and intelligent fermentation control, promoting Monascus applications in food, cosmetic, agriculture, medicine, and environmental protection industries.

Regulation of AreA on lipid biosynthesis under different nitrogen sources and C/N ratios in the model oleaginous fungus Mucor circinelloides.

Mucor circinelloides has been exploited as model filamentous fungi for studies of genetic manipulation of lipogenesis. It is widely recognized that lipid accumulation is increased when there is a lack of nitrogen source in oleaginous microorganism. Nitrogen metabolism in filamentous fungi is a complex process that can be regulated by the global nitrogen regulator AreA. In this study, we cultivated the areA-knockout and -overexpression strains obtained in our previous study, using 20 different nitrogen sources. It emerged that the disruption of AreA in M. circinelloides reduced its sensitivity to nitrogen availability, resulting in increased lipid synthesis. Specially, the areA-knockout strain was unable to fully utilize many nitrogen sources but the ammonium and glutamate. We continued to investigate lipid production at different molar C/N ratios using glucose as sole carbon source and ammonium sulfate as sole nitrogen source, of which the high C/N ratios activate high lipid accumulation. By comparing the experimental results with transcriptional analysis, we were able to identify the optimal process conditions suitable for lipid accumulation and potential targets for future metabolic engineering.

Promoters and Synthetic Promoters in Trichoderma reesei.

Trichoderma reesei holds immense promise for large-scale protein production, rendering it an excellent subject for deeper exploration using genetic engineering methods to achieve a comprehensive grasp of its cellular physiology. Understanding the genetic factors governing its intrinsic regulatory network is crucial, as lacking this knowledge could impede the expression of target genes. Prior and ongoing studies have concentrated on advancing new expression systems grounded in synthetic biology principles. These methodologies involve utilizing established potent promoters or engineered variations. Genomic and transcriptomic analyses have played a pivotal role in identifying robust promoters and expression systems, including light-responsive, copper-inducible, L-methionine-inducible, and Tet-On systems, among others. This chapter seeks to highlight various research endeavors focusing on tunable and constitutive promoters, the impact of different promoters on both native and foreign protein expression, the discovery of fresh promoters, and strategies conducive to future research aimed at refining and enhancing protein expression in T. reesei. Characterizing new promoters and adopting innovative expression systems hold the potential to significantly expand the molecular toolkit accessible for genetically engineering T. reesei strains. For instance, modifying potent inducible promoters such as Pcbh1 by replacing transcriptional repressors (cre1, ace1) with activators (xyr1, ace2, ace3, hap2/3/5) and integrating synthetic expression systems can result in increased production of crucial enzymes such as endoglucanases (EGLs), ß-glucosidases (BGLs), and cellobiohydrolases (CBHs). Similarly, robust constitutive promoters such as Pcdna1 can be converted into synthetic hybrid promoters by incorporating activation elements from potent inducible promoters, facilitating cellulase induction and expression even under repressive conditions. Nevertheless, further efforts are necessary to uncover innovative promoters and devise novel expression strategies to enhance the production of desired proteins on an industrial scale.

Formic acid sandwich method is well-suited for filamentous fungi identification and improves turn around time using Zybio EXS2600 mass spectrometry.

OBJECTIVES: Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is extensively employed for the identification of filamentous fungi on MALDI Biotyper (Bruker Daltonics) and Vitek MS (biomerieux), but the performance of fungi identification on new EXS2600 (Zybio) is still unknow. Our study aims to evaluate the new EXS2600 system's (Zybio) ability to rapidly identify filamentous fungi and determine its effect on turnaround time (TAT) in our laboratory. METHODS: We tested 117 filamentous fungi using two pretreatment methods: the formic acid sandwich (FA-sandwich) and a commercial mold extraction kit (MEK, Zybio). All isolates were confirmed via sequence analysis. Laboratory data were extracted from our laboratory information system over two 9-month periods: pre-EXS (April to December 2022) and post-EXS (April to December 2023), respectively. RESULTS: The total correct identification (at the species, genus, or complex/group level) rate of fungi was high, FA-sandwich (95.73%, 112/117), followed by MEK (94.02%, 110/117). Excluding 6 isolates not in the database, species-level identification accuracy was 92.79% (103/111) for FA-sandwich and 91.89% (102/111) for MEK; genus-level accuracy was 97.29% (108/111) and 96.39% (107/111), respectively. Both methods attained a 100% correct identification rate for Aspergillus, Lichtheimia, Rhizopus Mucor and Talaromyces species, and were able to differentiate between Fusarium verticillioides and Fusarium proliferatum within the Fusarium fujikuroi species complex. Notably, high confidence was observed in the species-level identification of uncommon fungi such as Trichothecium roseum and Geotrichum candidum. The TAT for all positive cultures decreased from pre EXS2600 to post (108.379 VS 102.438, P < 0.05), and the TAT for tissue decreased most (451.538 VS 222.304, P < 0.001). CONCLUSIONS: The FA-sandwich method is more efficient and accurate for identifying filamentous fungi with EXS2600 than the MEK. Our study firstly evaluated the performance of fungi identification on EXS2600 and showed it is suitable for clinical microbiology laboratories use.

Exophiala species in household environments and their antifungal resistance profile.

The black fungus Exophiala causes a wide range of infections from superficial to subcutaneous, but also invasive fungal infections in immunocompromised patients as well as healthy individuals. In addition, Exophiala, is a common colonizer of the air ways of patients with cystic fibrosis. However, the source of infection and mode of transmission is still unclear. The aim of this study was to investigate the presence of Exophiala in samples collected from Swedish indoor environments. We found that the Exophiala species were commonly found in dishwashers and that Exophiala dermatitidis was the most common Exophiala species, being identified in 70% (26 out of the 37) of samples. Almost all E. dermatitidis isolates had the ability to grow at 42 °C (P = 0.0002) and were catalase positive. Voriconazole and posaconazole exhibited the lowest MICs, while caspofungin and anidulafungin lack the antifungal activities in vitro. Future studies are needed to illuminate the transmission mode of the fungi.

Essential roles of Rad6 in conidial property, stress tolerance, and pathogenicity of Beauveria bassiana.

Rad6 functions as a ubiquitin-conjugating protein that regulates cellular processes in many fungal species. However, its role in filamentous entomopathogenic fungi remains poorly understood. This study characterizes Rad6 in Beauveria bassiana, a filamentous fungus widely employed as a critical fungicide globally. The results demonstrate a significant association between Rad6 and conidial properties, heat shock response, and UV-B tolerance. Concurrently, the mutant strain exhibited heightened sensitivity to oxidative stress, cell wall interfering agents, DNA damage stress, and prolonged heat shock. Furthermore, the absence of Rad6 significantly extended the median lethal time (LT50) of Galleria mellonella infected by B. bassiana. This delay could be attributed to reduced Pr1 proteases and extracellular cuticle-degrading enzymes, diminished dimorphic transition rates, and dysregulated antioxidant enzymes. Additionally, the absence of Rad6 had a more pronounced effect on genetic information processing, metabolism, and cellular processes under normal conditions. However, its impact was limited to metabolism in oxidative stress. This study offers a comprehensive understanding of the pivotal roles of Rad6 in conidial and hyphal stress tolerance, environmental adaptation, and the pathogenesis of Beauveria bassiana.

The cytosolic form of dual localized BolA family protein Bol3 is important for adaptation to iron starvation in Aspergillus fumigatus.

Aspergillus fumigatus is the predominant mould pathogen for humans. Adaption to host-imposed iron limitation has previously been demonstrated to be essential for its virulence. [2Fe-2S] clusters are crucial as cofactors of several metabolic pathways and mediate cytosolic/nuclear iron sensing in fungi including A. fumigatus. [2Fe-2S] cluster trafficking has been shown to involve BolA family proteins in both mitochondria and the cytosol/nucleus. Interestingly, both A. fumigatus homologues, termed Bol1 and Bol3, possess mitochondrial targeting sequences, suggesting the lack of cytosolic/nuclear versions. Here, we show by the combination of mutational, proteomic and fluorescence microscopic analyses that expression of the Bol3 encoding gene leads to dual localization of gene products to mitochondria and the cytosol/nucleus via alternative translation initiation downstream of the mitochondrial targeting sequence, which appears to be highly conserved in various Aspergillus species. Lack of either mitochondrial Bol1 or Bol3 was phenotypically inconspicuous while lack of cytosolic/nuclear Bol3 impaired growth during iron limitation but not iron sensing which indicates a particular importance of [2Fe-2S] cluster trafficking during iron limitation. Remarkably, cytosolic/nuclear Bol3 differs from the mitochondrial version only by N-terminal acetylation, a finding that was only possible by mutational hypothesis testing.

Immune Mechanisms of Filamentous Fungal Keratitis.

Filamentous fungal keratitis is a particularly serious eye infection that often results in ulceration, corneal perforation, and blindness. The cornea acts as a natural barrier against harmful agents due to the close connection of its epithelial cells. In addition, on its surface, there is a large number of substances with anti-inflammatory and bactericidal properties, such as secretory IgA and mucin glycoproteins, and antimicrobial peptides (AMPs), such as human ß-defensin 2 (HBD-2) and LL-37, which are especially increased in filamentous fungal keratitis. The interaction between pathogenic fungi and the host's immune mechanisms is a complex process: pathogen-associated molecular pattern (PAMP) molecules (chitin, ß-glucan, and mannan) found in the fungal cell wall are recognized by pattern recognition receptors (PRRs) (toll-like receptors {TLRs}, C-type lectin receptors {CLRs}, nucleotide-binding oligomerization domain-like receptors {NLRs}, and scavenger receptors {SR}) found in host defense cells, triggering the secretion of various types of cytokines, such as interleukins (IL), tumor necrosis factors (TNFs), and chemokines, which recruit macrophages and neutrophils to migrate to the site of infection and activate inflammatory responses. In addition, the interaction of hyphae and corneal epithelial cells can activate cluster of differentiation (CD) 4+ T cells, CD8+ T cells, and B cells and induce secretion of T-helper (Th)-type cytokines 2 (IL-4 and IL-13) and IgG.

[Filamentous morphology: a new frontier for genetic modification of filamentous fungal cell factories].

Filamentous fungi are a group of eukaryotic microorganisms widely found in nature. Some filamentous fungi have been developed as "cell factories" and extensively used for the production of recombinant proteins, organic acids, and secondary metabolites due to their strong protein secretion capabilities or effective synthesis of many natural products. The growth morphology of filamentous fungi significantly influences the quality and quantity of fermented products. Previous research conducted by the authors' group revealed that an increase in hyphal branches leads to enhanced protein secretion during liquid fermentation. With the development of morphological engineering of filamentous fungi, an increasing number of studies have focused on modifying fungal mycelium morphology to improve the yield of target metabolites during fermentation. While there have been a few reviews on the relationship between fungal fermentation morphology and productivity, research in this area is rapidly developing and requires updates. The paper presents a comprehensive review of domestic and international research reports, along with the authors' own research findings, to systematically review the morphological patterns of filamentous fungi, the impact of fungal morphology on industrial fermentation, as well as methods and strategies for regulating mycelial morphology. The aim of this review is to enhance the understanding of relevant domestic scholars regarding the morphological development of filamentous fungi and provide ideas for the rational engineering of fungal strains suitable for industrial fermentation.

3D imaging and analysis to unveil the impact of microparticles on the pellet morphology of filamentous fungi.

Controlling the morphology of filamentous fungi is crucial to improve the performance of fungal bioprocesses. Microparticle-enhanced cultivation (MPEC) increases productivity, most likely by changing the fungal morphology. However, due to a lack of appropriate methods, the exact impact of the added microparticles on the structural development of fungal pellets is mostly unexplored. In this study synchrotron radiation-based microcomputed tomography and three-dimensional (3D) image analysis were applied to unveil the detailed 3D incorporation of glass microparticles in nondestructed pellets of Aspergillus niger from MPEC. The developed method enabled the 3D analysis based on 375 pellets from various MPEC experiments. The total and locally resolved volume fractions of glass microparticles and hyphae were quantified for the first time. At increasing microparticle concentrations in the culture medium, pellets with lower hyphal fraction were obtained. However, the total volume of incorporated glass microparticles within the pellets did not necessarily increase. Furthermore, larger microparticles were less effective than smaller ones in reducing pellet density. However, the total volume of incorporated glass was larger for large microparticles. In addition, analysis of MPEC pellets from different times of cultivation indicated that spore agglomeration is decisive for the development of MPEC pellets. The developed 3D morphometric analysis method and the presented results will promote the general understanding and further development of MPEC for industrial application.

Airlift bioreactor-based strategies for prolonged semi-continuous cultivation of edible Agaricomycetes.

Submerged cultivation of edible filamentous fungi (Agaricomycetes) in bioreactors enables maximum mass transfer of nutrients and has the potential to increase the volumetric productivity of fungal biomass compared to solid state cultivation. These aspects are paramount if one wants to increase the range of bioactives (e.g. glucans) in convenient time frames. In this study, Trametes versicolor (M9911) outperformed four other Agaricomycetes tested strains (during batch cultivations in an airlift bioreactor). This strain was therefore further tested in semi-continuous cultivation. Continuous and semi-continuous cultivations (driven by the dilution rate, D) are the preferred bioprocess strategies for biomass production. We examined the semi-continuous cultivation of T. versicolor at dilution rates between 0.02 and 0.1 h-1. A maximum volumetric productivity of 0.87 g/L/h was obtained with a D of 0.1 h-1 but with a lower total biomass production (cell dry weight, CDW 8.7 g/L) than the one obtained at lower dilution rates (12.3 g/L at D of 0.04 and vs 13.4 g/L, at a D of 0.02 h-1). However, growth at a D of 0.1 h-1 resulted in a very short fermentation (18 h) which terminated due to washout (the specific D exceeded the maximum growth rate of the fungal biomass). At a D of 0.04 h-1, a CDW of 12.3 g/L was achieved without compromising the total residence time (184 h) of the fermentation. While the D of 0.04 h-1 and 0.07 h-1 achieved comparable volumetric productivities (0.5 g/L/h), the total duration of the fermentation at D of 0.07 h-1 was only 85 h. The highest glucan content of cells (27.8 as percentage of CDW) was obtained at a D of 0.07 h-1, while the lowest glucan content was observed in T. versicolor cells grown at a D of 0.02 h-1. KEY POINTS: • The highest reported volumetric productivity for fungal biomass was 0.87 g/L/h. • Semi-continuous fermentation at D of 0.02 h-1 resulted in 13.4 g/L of fungal biomass. • Semi-continuous fermentation at D of 0.07 h-1 resulted in fungal biomass with 28% of total glucans.

Live cell imaging of ß-tubulin mRNA reveals spatiotemporal expression dynamics in the filamentous fungus Aspergillus oryzae.

In filamentous fungi, microtubules are important for polar growth and morphological maintenance and serve as rails for intracellular trafficking. The molecular mechanisms associated with microtubules have been analyzed. However, little is known about when and where tubulin, a component of microtubules, is biosynthesized in multinuclear and multicellular filamentous fungi. In this study, we visualized microtubules based on the enhanced green fluorescence protein (EGFP)-labeled α-tubulin and ß-tubulin mRNA tagged by the EGFP-mediated MS2 system in living yellow Koji mold Aspergillus oryzae cells in order to understand the spatiotemporal production mechanism of tubulin. We found that mRNA of btuA, encoding for ß-tubulin, localized at dot-like structures through the apical, middle and basal regions of the hyphal cells. In addition, some btuA mRNA dots showed microtubule-dependent motor protein-like dynamics in the cells. Furthermore, it was found that btuA mRNA dots were decreased in the cytoplasm just before mitosis but increased immediately after mitosis, followed by a gradual decrease. In summary, the localization and abundance of ß-tubulin mRNA is spatiotemporally regulated in living A. oryzae hyphal cells.

Genetic diversity and population structure of Penicillium roqueforti isolates from Turkish blue cheeses.

Blue cheeses, including renowned mold-ripened varieties such as Roquefort (France), Gorgonzola (Italy), Stilton (UK), Danablue (Denmark), and Cabrales (Spain), owe their distinct blue-green color and unique flavor to the fungal species Penicillium roqueforti. In Turkey, traditional cheeses similar to blue cheeses, namely mold-ripened Tulum and Civil, employ production techniques distinct from their European counterparts. Notably, mold-ripening in Turkish cheeses is spontaneous and does not involve starter cultures. Despite P. roqueforti being recognized for its distinct genetic populations sourced from various blue cheeses and non-cheese origins globally, the characteristics of the P. roqueforti population within Turkish cheeses remain unexplored. This study aimed to unravel the genetic characteristics and population structure of P. roqueforti from Turkish mold-ripened cheeses. Analysis of mold-ripened Civil (n = 22) and Tulum (n = 8) samples revealed 66 P. roqueforti isolates (76.6 % of total fungal isolates). Subsequently, these isolates (n = 66) and those from previous studies (Tulum n = 53, Golot n = 1) were used to assess genetic characteristics and mating genotypes. All 120 isolates harbored horizontal transfer regions (Wallaby and CheesyTer) and predominantly possessed the MAT1-2 mating genotype, similar to global blue cheese populations. However, most lacked the mpaC deletion associated with such populations. Analysis of the population with three polymorphic microsatellite markers revealed 36 haplotypes (HTs). Some cheeses contained isolates with different HTs or opposite mating genotypes, aligning with spontaneous fungal growth. Tulum and Civil isolates exhibited similar population diversity without forming distinct subgroups. Phylogenetic analysis of 20 selected isolates showed 75 % aligning with global blue cheese isolates, while 25 % formed unique clades. Overall, Turkish P. roqueforti isolates share genetic similarities with global populations but exhibit unique characteristics, suggesting potential new clades deserving further investigation. This research illuminates the characteristics of P. roqueforti isolates from Turkish cheeses, contributing to the knowledge of the global intraspecific diversity of the P. roqueforti species.