RESUMO
Temperature and resource availability are pivotal factors influencing phytoplankton community structures. Numerous prior studies demonstrated their significant influence on phytoplankton stoichiometry, cell size, and growth rates. The growth rate, serving as a reflection of an organism's success within its environment, is linked to stoichiometry and cell size. Consequently, alterations in abiotic conditions affecting cell size or stoichiometry also exert indirect effects on growth. However, such results have their limitations, as most studies used a limited number of factors and factor levels which gives us limited insights into how phytoplankton respond to environmental conditions, directly and indirectly. Here, we tested for the generality of patterns found in other studies, using a combined multiple-factor gradient design and two single species with different size characteristics. We used a structural equation model (SEM) that allowed us to investigate the direct cumulative effects of temperature and resource availability (i.e., light, N and P) on phytoplankton growth, as well as their indirect effects on growth through changes in cell size and cell stoichiometry. Our results mostly support the results reported in previous research thus some effects can be identified as dominant effects. We identified rising temperature as the dominant driver for cell size reduction and increase in growth, and nutrient availability (i.e., N and P) as dominant factor for changes in cellular stoichiometry. However, indirect effects of temperature and resources (i.e., light and nutrients) on species' growth rates through cell size and cell stoichiometry differed across the two species suggesting different strategies to acclimate to its environment.
RESUMO
Switchable adhesive is essential to develop transfer printing, which is an advanced heterogeneous material integration technique for developing electronic systems. Designing a switchable adhesive with strong adhesion strength that can also be easily eliminated to enable noncontact transfer printing still remains a challenge. Here, we report a simple yet robust design of switchable adhesive based on a thermally responsive shape memory polymer with micropillars of different heights. The adhesive takes advantage of the shape-fixing property of shape memory polymer to provide strong adhesion for a reliable pick-up and the various levels of shape recovery of micropillars under laser heating to eliminate the adhesion for robust printing in a noncontact way. Systematic experimental and numerical studies reveal the adhesion switch mechanism and provide insights into the design of switchable adhesives. This switchable adhesive design provides a good solution to develop laser-driven noncontact transfer printing with the capability of eliminating the influence of receivers on the performance of transfer printing. Demonstrations of transfer printing of silicon wafers, microscale Si platelets, and micro light emitting diode (µ-LED) chips onto various challenging nonadhesive receivers (e.g., sandpaper, stainless steel bead, leaf, or glass) to form desired two-dimensional or three-dimensional layouts illustrate its great potential in deterministic assembly.
RESUMO
The development of advanced magnesium metal batteries (MMBs) has been hindered by longstanding challenges, such as the inability to induce uniform magnesium (Mg) nucleation and the inefficient utilization of Mg foil. This study introduces a novel solution in the form of a flexible, lightweight, paper-based scaffold that incorporates gradient conductivity, magnesiophilicity, and pore size. This design is achieved through an industrially adaptable papermaking process in which the ratio of carboxylated multi-walled carbon nanotubes to softwood cellulose fibers is meticulously adjusted. The triple-gradient structure of the scaffold enables the regulation of Mg ion flux, promoting bottom-up Mg deposition. Owing to its high flexibility, low thickness, and reduced density, the scaffold has potential applications in flexible and wearable electronics. Accordingly, the triple-gradient electrodes exhibit stable operation for over 1200 h at 3 mA cm-2 /3 mAh cm-2 in symmetrical cells, markedly outperforming the non-gradient and metallic Mg alternatives. Notably, this study marks the first successful fabrication of a flexible MMB pouch full cell, achieving an impressive volumetric energy density of 244 Wh L-1 . The simplicity and scalability of the triple-gradient design, which uses readily available materials through an industrially compatible papermaking process, open new doors for the production of flexible, high-energy-density metal batteries.
RESUMO
Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb5+ element, a synchronous surface-to-bulk-modified LiCoO2 featuring Li3 NbO4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li+ diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg-1 and 4.7 V-class 550 Wh kg-1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials.
RESUMO
3D Cu current collectors have been demonstrated to improve the cycling stability of Li metal anodes, however, the role of their interfacial structure for Li deposition pattern has not been investigated thoroughly. Herein, a series of 3D integrated gradient Cu-based current collectors are fabricated by the electrochemical growth of CuO nanowire arrays on Cu foil (CuO@Cu), where their interfacial structures can be readily controlled by modulating the dispersities of the nanowire arrays. It is found that the interfacial structures constructed by sparse and dense dispersion of CuO nanowire arrays are both disadvantageous for the nucleation and deposition of Li metal, consequently fast dendrite growth. In contrast, a uniform and appropriate dispersity of CuO nanowire arrays enables stable bottom Li nucleation associated with smooth lateral deposition, affording the ideal bottom-up Li growth pattern. The optimized CuO@Cu-Li electrodes exhibit a highly reversible Li cycling including a coulombic efficiency of up to ≈99% after 150 cycles and a long-term lifespan of over 1200 h. When coupling with LiFePO4 cathode, the coin and pouch full-cells deliver outstanding cycling stability and rate capability. This work provides a new insight to design the gradient Cu current collectors toward high-performance Li metal anodes.
RESUMO
Admittedly, the design requirements of compactness, low frequency, and broadband seem to constitute an impossible trinity, hindering the further development of elastic metamaterials (EMMs) in wave shielding engineering. To break through these constraints, we propose theoretical combinations of effective parameters for wave isolation based on the propagation properties of Lamb waves in the EMM layer. Accordingly, we design compact EMMs with a novel ultralow-frequency bandgap, and the role of auxeticity in the dissociation between the dipole mode and the toroidal dipole mode is clearly revealed. Finally, under the guidance of the improved gradient design, we integrate multiple bandgaps to assemble metamaterial barriers (MMBs) for broadband wave isolation. In particular, the original configuration is further optimized and its ultralow-frequency and broadband performance are proven by transmission tests. It is foreseeable that our work will provide a meaningful reference for the application of the new EMMs in disaster prevention and protection engineering.
RESUMO
Charge transport is a key process that dominates battery performance, and the microstructures of the cathode, anode, and electrolyte play a central role in guiding ion and/or electron transport inside the battery. Rational design of key battery components with varying microstructure along the charge-transport direction to realize optimal local charge-transport dynamics can compensate for reaction polarization, which accelerates electrochemical reaction kinetics. Here, the principles of charge-transport mechanisms and their decisive role in battery performance are presented, followed by a discussion of the correlation between charge-transport regulation and battery microstructure design. The design strategies of the gradient cathodes, lithium-metal anodes, and solid-state electrolytes are summarized. Future directions and perspectives of gradient design are provided at the end to enable practically accessible high-energy and high-power-density batteries.
RESUMO
Constructing a composite lithium anode with a rational structure has been considered as an effective approach to regulate and relieve the tough problems of a sparkling Li anode. However, the potential short circuits risk that Li deposition at the surface of the framework has not yet been resolved. Here, we present a simple regulating-deposition strategy to guide the preferentially bottom-up deposition/growth of Li. The triple-gradient structure of modified porous copper with electrical passivation (top) and chemical activation (bottom) shows significant improvements in the morphological stability and electrochemical performance. Meanwhile, the in situ generation of Li2Se can as an advanced artificial SEI layer be devoted to homogeneous Li plating/stripping. As a result, the composite anode exhibits a long-term cycling over 250 cycles with a high average CE of 98.2% at 1 mA cm-2. Furthermore, a capacity retention of 94.4% in full cells can be achieved when pairing with LiFePO4 as the cathode. These results ensure a bright direction for developing high-performance Li metal anodes.
RESUMO
For achieving early intervention treatment to help patients delay or avoid joint replacement surgery, a personalized scaffold should be designed coupling the effects of mechanical, fluid mechanical, chemical, and biological factors on tissue regeneration, which results in time- and cost-consuming trial-and-error analyses to investigate the in vivo test and related experimental tests. To optimize the fluid mechanical and material properties to predict osteogenesis and cartilage regeneration for the in vivo and clinical trial, a simulation approach is developed for scaffold design, which is composed of a volume of a fluid model for simulating the bone marrow filling process of the bone marrow and air, as well as a discrete phase model and a cell impingement model for tracking cell movement during bone marrow fillings. The bone marrow is treated as a non-Newtonian fluid, rather than a Newtonian fluid, because of its viscoelastic property. The simulation results indicated that the biofunctional bionic scaffold with a dense layer to prevent the bone marrow flow to the cartilage layer and synovia to flow into the trabecular bone area guarantee good osteogenesis and cartilage regeneration, which leads to high-accuracy in vivo tests in sheep . This approach not only predicts the final bioperformance of the scaffold but also could optimize the scaffold structure and materials by their biochemical, biological, and biomechanical properties.
RESUMO
One of tissue engineering's main goals is to fabricate three-dimensional (3D) scaffolds with interconnected pores to reconstruct and regenerate damaged or deformed tissues and organs. In this regard, 3D printing is a promising technique for the fabrication of tissue scaffolds, which can precisely make predetermined and complicated architectures. This study aims to investigate and optimize the physical, mechanical, and biological properties of 3D truss architecture tissue scaffolds with different pore geometries. The mechanical properties of poly (methyl methacrylate) scaffolds are analysed experimentally and numerically. Furthermore, the mechanical and physical properties of scaffolds are optimized with response surface methodology (RSM), and cell adhesion of the 3D truss scaffold studies. Results demonstrate that mechanical properties of the simple and gradient scaffolds have different mechanical behaviors that are strongly correlated with pore size and their architectures, rather than merely the values of the porosity. It is also observed that the RSM technique can enable designers to enhance mechanical and physical properties of scaffolds at low cost. Moreover, the results of biological behaviour can endorse the reliability of 3D truss architecture in bone tissue engineering.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , Osso e Ossos , Porosidade , Impressão Tridimensional , Reprodutibilidade dos TestesRESUMO
PURPOSE: To design a low-cost, portable permanent magnet-based MRI system capable of obtaining in vivo MR images within a reasonable scan time. METHODS: A discretized Halbach permanent magnet array with a clear bore diameter of 27 cm was designed for operation at 50 mT. Custom-built gradient coils, RF coil, gradient amplifiers, and RF amplifier were integrated and tested on both phantoms and in vivo. RESULTS: Phantom results showed that the gradient nonlinearity in the y-direction and z-direction was less than 5% over a 15-cm FOV and did not need correcting. For the x-direction, it was significantly greater, but could be partially corrected in postprocessing. Three-dimensional in vivo scans of the brain of a healthy volunteer using a turbo spin-echo sequence were acquired at a spatial resolution of 4 × 4 × 4 mm in a time of about 2 minutes. The T1 -weighted and T2 -weighted scans showed a good degree of tissue contrast. In addition, in vivo scans of the knee of a healthy volunteer were acquired at a spatial resolution of about 3 × 2 × 2 mm within 12 minutes to show the applicability of the system to extremity imaging. CONCLUSION: This work has shown that it is possible to construct a low-field MRI unit with hardware components costing less than 10 000 Euros, which is able to acquire human images in vivo within a reasonable data-acquisition time. The system has a high degree of portability with magnet weight of approximately 75 kg, gradient and RF amplifiers each 15 kg, gradient coils 10 kg, and spectrometer 5 kg.
Assuntos
Imageamento por Ressonância Magnética , Imãs , Encéfalo/diagnóstico por imagem , Extremidades , Humanos , Imagens de FantasmasRESUMO
Recent findings indicate that atmospheric warming increases the persistence of weather patterns in the mid-latitudes, resulting in sequences of longer dry and wet periods compared to historic averages. The alternation of progressively longer dry and wet extremes could increasingly select for species with a broad environmental tolerance. As a consequence, biodiversity may decline. Here we explore the relationship between the persistence of summer precipitation regimes and plant diversity by subjecting experimental grassland mesocosms to a gradient of dry-wet alternation frequencies whilst keeping the total precipitation constant. The gradient varied the duration of consecutive wet and dry periods, from 1 up to 60 days with or without precipitation, over a total of 120 days. An alternation of longer dry and wet spells led to a severe loss of species richness (up to -75% relative to the current rainfall pattern in W-Europe) and functional diversity (enhanced dominance of grasses relative to nitrogen (N)-fixers and non-N-fixing forbs). Loss of N-fixers and non-N-fixing forbs in severe treatments was linked to lower baseline competitive success and higher physiological sensitivity to changes in soil moisture compared to grasses. The extent of diversity losses also strongly depended on the timing of the dry and wet periods. Regimes in which long droughts (≥20 days) coincided with above-average temperatures showed significantly more physiological plant stress over the experimental period, greater plant mortality, and impoverished communities by the end of the season. Across all regimes, the duration of the longest period below permanent wilting point was an accurate predictor of mortality across the communities, indicating that increasingly persistent precipitation regimes may reduce opportunities for drought stress alleviation. We conclude that without recruitment, which was precluded in this experiment, summer precipitation regimes with longer dry and wet spells will likely diminish plant diversity, at least in the short term.
Assuntos
Biodiversidade , Secas , Europa (Continente) , Pradaria , Plantas , SoloRESUMO
The viable Li metal anodes (LMAs) are still hampered by the safety concerns resulting from fast Li dendrite growth and huge volume expansion during cycling. Herein, carbon nanofiber matrix anchored with MgZnO nanoparticles (MgZnO/CNF) is developed as a flexible triple-gradient host for long cycling LMAs. The superlithiophilic MgZnO nanoparticles significantly increase the wettability of CNF for fast and homogeneous infusion with molten Li. The in-built potential and lithiophilic gradients constructed after an in situ lithiation of MgZnO and CNF enable nearly zero Li nucleation overpotential and homogeneous deposition of lithium at different scales. As such, the LMAs based on MgZnO/CNF achieve long cycling life and small overpotential even at a record-high current density of 50 mA cm-2 and a high areal capacity of 10 mAh cm-2 . A full cell paring with this designed LMA and LiFePO4 exhibits a capacity retention up to 82% after 600 cycles at a high rate of 5 C. A Li-ion capacitor also shows an impressive capacity retention of 84% at 5 A g-1 after 10 000 cycles. Such a Li@MgZnO/CNF anode is a promising candidate for Li-metal energy storage systems, especially working under ultrahigh current density.
RESUMO
This paper presents a robotic anchoring module, a sensorized mechanism for attachment to the environment that can be integrated into robots to enable or enhance various functions such as robot mobility, remaining on location or its ability to manipulate objects. The body of the anchoring module consists of two portions with a mechanical stiffness transition from hard to soft. The hard portion is capable of containing vacuum pressure used for actuation while the soft portion is highly conformable to create a seal to contact surfaces. The module is integrated with a single sensory unit which exploits a fibre-optic sensing principle to seamlessly measure proximity and tactile information for use in robot motion planning as well as measuring the state of firmness of its anchor. In an experiment, a variable set of physical loads representing the weights of potential robot bodies were attached to the module and its ability to maintain the anchor was quantified under constant and variable vacuum pressure signals. The experiment shows the effectiveness of the module in quantifying the state of firmness of the anchor and discriminating between different amounts of physical loads attached to it. The proposed anchoring module can enable many industrial and medical applications where attachment to environment is of crucial importance for robot control.
Assuntos
Desenho de Equipamento , Mecânica , Octopodiformes/fisiologia , Robótica , Animais , Biomimética , Análise de Falha de Equipamento , Extremidades , Estresse MecânicoRESUMO
OBJECTIVE: The objective of our study was to compare diffusion-weighted imaging (DWI) sequences using a bipolar versus a monopolar single-shot echo-planar imaging (EPI) gradient design for image quality and for lesion detection and characterization in patients with liver disease. MATERIALS AND METHODS: In this retrospective study, 77 patients with chronic liver disease who underwent MRI including bipolar and monopolar DWI at 1.5 T were assessed. Two independent observers reviewed the DWI studies for image quality and the detection and characterization of liver lesions. The reference standard for diagnosis was established by consensus review of two different observers using imaging characteristics on conventional MRI sequences, lesion stability over time, pathologic correlation, or a combination of these findings. The estimated signal-to-noise ratio (SNR) of liver parenchyma and apparent diffusion coefficients (ADCs) of the liver and lesions were calculated for both sequences. ROC analysis was conducted to evaluate the performance of ADC for the diagnosis of hepatocellular carcinoma (HCC). RESULTS: Eighty-five lesions, 50 HCCs and 35 benign lesions, were detected with the reference standard in 38 patients. There was equivalent image quality for the bipolar and monopolar sequences (p = 0.24-0.42). The HCC detection rate for observers 1 and 2 was slightly better with bipolar DWI (50.0% and 52.0%, respectively) compared with monopolar DWI (44.0% and 46.0%); however, this difference did not reach statistical significance. The estimated SNR was higher with the monopolar sequence than with the bipolar sequence (p ≤ 0.001). The AUC for the ROC curve was 0.691 for bipolar DWI and 0.649 for monopolar DWI when ADC was used for the characterization of HCC, which is not a statistically significant difference (p = 0.59). CONCLUSION: The higher estimated SNR yielded by the monopolar DWI sequence did not translate into better HCC detection compared with the bipolar DWI sequence. ADC has a limited role for HCC characterization in patients with liver disease.