RESUMO
The study aimed to directly assess the ocular safety of 222-nm far-ultraviolet-C (UVC) irradiation in humans, given the limited clinical trials in this area. This wavelength offers the potential for safe and effective microbial inactivation in occupied spaces, but its safety profile for human eyes requires thorough investigation. This prospective, interventional study involved five subjects aged 29-47 years, who were exposed to 222-nm UVC at doses of 22, 50, and 75 mJ/cm2. The subjects were monitored using custom-made glasses with a UV-cut filter on one eye to serve as a control. UVC irradiation was conducted using a KrCl excimer lamp, and ocular examinations were performed prior to exposure, 24 h post-exposure, and at 1, 3, and 6 months. Parameters assessed included visual acuity, refractive error, corneal endothelial density, corneal erosion scores, and conjunctival hyperemia scores. The study found no clinically significant photokeratitis or long-term eye damage across the five subjects, even at the highest dose of 75 mJ/cm2. Temporary ocular discomfort, including sensations of dryness and epiphora, was reported, but these symptoms subsided within hours after irradiation. The findings indicate that 222-nm far-UVC irradiation up to 75 mJ/cm2 does not cause "clinically significant photokeratitis" or long-term ocular damage, though it may induce temporary discomfort. This supports the safe use of 222-nm UVC for germicidal applications in occupied environments, providing a basis for revised safety guidelines.
RESUMO
This study aimed to estimate radon concentrations in groundwater and surface water to evaluate radon (222Rn) contamination in drinking water within the Amreli region of Saurashtra, Gujarat, India. Water samples from 84 sites, covering about 3000 km2, were analyzed using the RAD7 device from Durridge Instruments. Samples were collected in 250 ml radon-tight bottles. Radon concentrations ranged from 0.1 to 13.6 Bq/L, averaging 4.52 Bq/L. At three sites (P9, P29, P35), radon levels exceeded the USEPA limit of 11.1 Bq/L. P9 and P29 are near the Tulsishyam geothermal area, while P35 is close to the Savarkundla fault. Geothermal fluids in Tulsishyam may facilitate radon migration, and swarm-type earthquakes near Savarkundla could also contribute to radon migration. Concurrently, physicochemical parameters like Potential of Hydrogen (pH) and Total Dissolved Solid (TDS) were measured, with no significant correlation found between radon levels and these parameters. Samples were taken from tube wells with depths ranging from 105 to 750 feet, averaging 359 feet. A strong and significant correlation (0.83) was observed between radon concentration and water depth. Health risks from radon exposure were assessed by estimating annual effective dose rates for different age groups through ingestion and inhalation. In some instances, the annual effective dose rate surpassed the WHO-recommended value of 100 µSv/year. However, in most instances, the presence of radon in the water does not indicate a significant radiological risk.
Assuntos
Água Potável , Água Subterrânea , Monitoramento de Radiação , Radônio , Poluentes Radioativos da Água , Radônio/análise , Índia , Água Potável/química , Água Potável/análise , Poluentes Radioativos da Água/análise , Água Subterrânea/química , Monitoramento de Radiação/métodos , Humanos , Fontes Termais/químicaRESUMO
This study presents a valuable dataset on air quality in the densely populated Dhaka Export Processing Zone (DEPZ) of Bangladesh. It included a dataset of Particulate Matter (PM2.5, PM10) and CO concentrations with Air Quality Index (AQI) values. PM data was collected 24h, and CO data was collected 8h monthly from 2019 to 2023 using respirable dust sampler APS-113NL for PM2.5, APS-113BL for PM10, and LUTRON AQ9901SD Air Quality Monitor Data Logger used to measure CO concentration data. Data sampling locations are selected based on population density, and employment data for DEPZ is also included, highlighting a potential rise in population density. This article also forecasted pollutant concentrations, AQI values, and health hazards associated with air pollutants using the Auto Regressive Moving Average (ARIMA) model. The performance of the ARIMA model was also measured using root mean squared error (RMSE) and mean absolute error (MAE). However, this can be used to raise awareness among the public about the health hazards associated with air pollution and encourage them to take measures to reduce their exposure to air pollutants. In addition, this data can be instrumental for researchers and policymakers to assess air pollution risks, develop control strategies, and improve air quality in the DEPZ.
RESUMO
Mercury is a toxic pollutant that poses risks for the human population, mainly by eating contaminated fish. Mercury is released into the atmosphere from a variety of anthropogenic activities, with levels of emissions and under policy controls that largely vary across the world, leading thus to different relative contributions to the environmental matrices. Establishing the exact sources of this contaminant in the environment is crucial to optimising the policies aimed at mitigating the exposure risks for specific populations or ecosystems. In this study, we modelled, for the first time, the fingerprint of mercury anthropogenic emissions, jointly released by source-sectors (11) and source-regions (13), on the deposition over (19) FAO fishery zones, and on the FAO official fishery productions worldwide over the 2012-2021 decade. Using mercury anthropogenic emissions for 2012 from EDGAR, East Asia and "Artisanal and Small scale Gold Mining" result the source-region and the source-sector, respectively, that contribute the most to the mercury deposition over all the FAO fishery zones. The only exception applies for the FAO fishery zone 37, the Mediterranean Sea, where the "Industrial Combustion" from the closest Europe is the pair region-sector whose joint contribution is the greatest. When normalised to the overall fishery production worldwide, representing the global fish consumption, the anthropogenic mercury fingerprint showed a similar general pattern, however with notable differences, amplifying the relative contributions of all source-sectors from East Asia and attenuating the relative contributions of the regions in the Southern Hemisphere. This fingerprint further changes when the fish consumption in countries, classified by the World Bank as having different incomes, is considered. These results demonstrate that the same anthropogenic mercury deposited on any fishery zone actually affects in a different way the different population segments worldwide. This study aims to urge the science community as well as the policy makers to use a measure that better represents the mercury hazard for human health. Further, we hope that this study, using nomenclatures that are largely used on final shelf-product, could increase the people's awareness regarding the products they consume.
RESUMO
This study examined the water quality of the Turag River, an important tributary river in Dhaka, Bangladesh in terms of physicochemical characteristics and heavy metal contamination to assess the potential risks to both ecological systems and human health. The majority of the water samples complied with the acceptable limits established by the World Health Organization (WHO) for various parameters including pH, electrical conductivity (EC), total dissolved solids (TDS), dissolved oxygen (DO), chemical oxygen demand (COD), sodium adsorption ratio (SAR), and magnesium adsorption ratio (MAR), except total hardness (TH). The sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), chloride (Cl-), fluoride (F-), nitrate (NO3 -), and sulfate (SO4 2-) levels in the water samples were found to be within acceptable ranges for most cases. Moreover, heavy metals including lead (Pb), cadmium (Cd), chromium (Cr), nickel (Ni), iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), arsenic (As), selenium (Se), and mercury (Hg) were analyzed and their mean concentrations (µg/L) were found in the order of Fe (244.72 ± 214.35) > Mn (28.93 ± 29.64) > Zn (22.97 ± 10.93) > Cu (8.28 ± 5.99) > Hg (8.23 ± 6.58) > As (1.34 ± 0.39) > Ni (1.20 ± 0.38) > Cr (0.67 ± 0.85) > Pb (0.61 ± 0.72) > Se (0.42 ± 0.48) > Cd (0.13 ± 0.09) which were within the acceptable limit, except Hg. The cumulative effect of all heavy metals was assessed through the heavy metal pollution index (HPI), contamination degree (Cd), and nemerow pollution index (PN). The mean value of HPI (682.38 ± 525.68) crossed the critical index value of 100, indicating an elevated level of pollution. The mean value of Cd (8.763 ± 6.48) indicates a low-moderate-significant level of contamination due to an elevated level of Hg, and for the PN it was found 174.27 ± 146.66, indicating a high level of pollution due to high level of Fe. Ecological risk index (ERI) indicated low levels of risk for Pb, Cd, Cr, Ni, Fe, Mn, As, Se, Cu, and Zn but a significantly high risk for Hg. The water was classified as good to excellent based on its physicochemical properties (pH, EC, TDS, COD, DO, F-, Cl-, NO3 -, and SO4 2-) while it was deemed poor to unsuitable for heavy metals according to the water quality index (WQI). Among the carcinogenic constituents, As poses the greatest carcinogenic risk, particularly for children. The mean value of Cr, Mn, and As in the HQingestion for adult and child, and Cd, Hg for child exceeded the threshold value established by the United States Environmental Protection Agency (USEPA), while the HQdermal values remained below the maximum limit for all heavy metals. The value of HI at all locations exceeds the threshold of 1, as specified by USEPA. Principal component analysis (PCA) and cluster analysis revealed that the presence of heavy metals in the Turag River was mainly attributed to anthropogenic sources, including industrial effluent discharge from neighboring industries, domestic wastewater, and agricultural runoff containing agrochemicals from the surrounding lands.
RESUMO
Microcystin (MC), a hepatotoxin that is harmful to human health, has frequently increased in freshwaters worldwide due to the increase in toxic cyanobacterial blooms. Despite many studies reported the human exposure to MC through drinking water, the potential transfer of this toxin to human via consumption of vegetables grown on farmlands that are naturally irrigated with contaminated water has not been largely investigated. Therefore, this study investigates the presence of MC in irrigation water and its potential accumulation in commonly consumed vegetables from Egyptian farmlands. The results of toxin analysis revealed that all irrigation water sites contained high MC concentrations (1.3-93.7 µg L-1) along the study period, in association with the abundance of dominant cyanobacteria in these sites. Meanwhile, MCs were detected in most vegetable plants surveyed, with highest levels in potato tubers (1100 µg kg-1 fresh weight, FW) followed by spinach (180 µg kg-1 FW), onion (170 µg g-1 FW), Swiss chard (160 µg kg-1 FW) and fava bean (46 µg kg-1 FW). These MC concentrations in vegetables led to estimated daily intake (EDI) values (0.08-1.13 µg kg bw-1 d-1 for adults and 0.11-1.5 µg kg bw-1 d-1 for children), through food consumption, exceeding the WHO recommended TDI (0.04 µg kg bw-1 d-1) for this toxin. As eutrophic water is widely used for irrigation in many parts of the world, our study suggests that cyanotoxins in irrigation waters and agricultural plants should be regularly monitored to safeguard the general public from inadvertent exposure to harmful toxins via food consumption.
Assuntos
Irrigação Agrícola , Contaminação de Alimentos , Inocuidade dos Alimentos , Microcistinas , Verduras , Microcistinas/análise , Egito , Medição de Risco , Verduras/química , Humanos , Contaminação de Alimentos/análise , CianobactériasRESUMO
Metal pollution is a significant environmental and health problem in aquatic ecosystems worldwide, particularly in coastal systems impacted by emissions from thermoelectric plants, as is the case of the Tampamachoco lagoon. To evaluate the seasonal contamination levels of Cd, Pb, Cr, and Cu in species of commercial interest in the Tampamachoco lagoon and estimate the health risk associated with their consumption, a total of 180 fish, 90 oysters (Crassostrea virginica), 27 crabs (Callinectes sapidus), and 24 shrimp (Litopenaeus setiferus) were sampled. Metal concentrations in the species analyzed were Cu > Pb > Cr > Cd. According to the Target Hazard Quotient and the health risk index, consumption of the marine species examined should be considered safe for human health, as both values are <1. However, Carcinogenic risk values for Pb and Cr indicated that consumers may be at risk of cancer (10-3), due to exposure from the thermoelectric emissions.
Assuntos
Monitoramento Ambiental , Metais Pesados , Poluentes Químicos da Água , Animais , Poluentes Químicos da Água/análise , Metais Pesados/análise , Medição de Risco , Golfo do México , Peixes , Humanos , Braquiúros , Biota , Penaeidae , Contaminação de Alimentos/análiseRESUMO
Nuisance imposed by biotic and abiotic stressors on diverse agroecosystems remains an area of focus for the scientific fraternity. However, emerging contaminants such as microplastics (MP) have imposed additional dimension (alone or in combinations with other stressors) in agroecosystems and keep escalating the challenges to achieve sustainability. MP are recognized as persistent anthropogenic contaminants, fetch global attention due to their unique chemical features that keeps themselves unresponsive to the decaying process. This review has been theorized to assess the current research trends (along with possible gap areas), widespread use of MP, enhancement of the harshness of heavy metals (HMs), complex interactions with physico-chemical constituents of arable soil, accumulation in the edible parts of field crops, dairy products, and other sources to penetrate the food web. So far, the available review articles are oriented to a certain aspect of MP and lack a totality when considered from in soil-water-food perspective. In short, a comprehensive perspective of the adverse effects of MP on human health has been assessed. Moreover, an agro-techno-socio-health prospective-oriented critical assessment of policies and remedial measures linked with MP has provided an extra edge over other similar articles in influential future courses of research.
Assuntos
Monitoramento Ambiental , Microplásticos , Poluentes do Solo , Solo , Poluentes do Solo/análise , Microplásticos/análise , Solo/química , Cadeia Alimentar , Agricultura , Poluentes Químicos da Água/análise , Contaminação de Alimentos/análise , Humanos , Metais Pesados/análiseRESUMO
The fabricated metal product industries were identified as producers of variable and heterogeneous pollution. Workers in these manufacturing facilities are exposed to multiple pollutants present at variable concentrations. Specific known adverse health effects include bladder cancer associated with metalworking fluid exposure and lung cancer associated with electroplating processes. To reduce the incidence of these adverse effects, the main challenge is to identify the most hazardous pollutants within this complex exposure environment and evaluate the corresponding health potentials. In this study, exposure indices were formulated to assess multiple metal exposures with the ultimate goal of providing relevant information for exposure reduction and control measures. Fifteen plants, including metal mold manufacturing, metal casting, and surface treatment plants, were investigated in terms of total concentration, summation of corresponding ratio to threshold limit value (STLVr), hazard index (HI), and incremental cancer risk. The results revealed that emissions of aluminum, iron, and manganese were primarily found in the metal mold manufacturing/casting plants, while emissions of chromium, nickel, and zinc were found in surface treatment plants. STLVr and HI were more useful than the total concentration for identifying hazardous metals, which were chromium and nickel, and could specify the facilities that were in need of control measures. As for cancer risk, the metal mold manufacturing/casting plants had lower risk than the surface treatment plants, and the contributing metals for these two plant types were cobalt and chromium, respectively. This study established a useful procedure to evaluate health hazards and cancer risk. The resulting information is useful for prioritizing mitigation control of multiple metal exposures.
Assuntos
Metais , Exposição Ocupacional , Exposição Ocupacional/análise , Exposição Ocupacional/efeitos adversos , Humanos , Metais/análise , Medição de Risco , Monitoramento Ambiental/métodosRESUMO
Pesticides are chemical substances used to kill or control various types of pests, which are hazardous for crops and animals. Pesticides may remain on or in foods after these are applied to crops. Pesticide residue in food has been a major global concern since there are direct and indirect health hazards associated with the regular consumption of foods with pesticide residues. Chlorpyrifos is one of the most used pesticides that has received much attention worldwide due to its detrimental health impact. The presence of chlorpyrifos residue in food crops can have both long-term and short-term effects on consumer health. Bangladesh is an agricultural country that uses a high volume of pesticides every year including chlorpyrifos. This experimental study aimed to analyze chlorpyrifos pesticide residue in locally grown cauliflower, cabbage, and eggplant samples by gas chromatography-mass spectrometry (GC-MS) technique followed by a suitable extraction process. Commercially available cauliflower, cabbage, and eggplant samples along with samples cultivated with the recommended pesticide dose were collected for qualitative and quantitative analysis. Samples cultivated without chlorpyrifos were collected as control samples for the validation study. The method was validated with respect to accuracy, recovery, reproducibility, linearity, limit of detection, and limit of quantification. The method has a limit of detection (LOD) of 0.011 mg/kg and a limit of quantification (LOQ) of 0.034 mg/kg. The experimental results were compared to the maximum residue level (MRL) to assess the human health impact. Chlorpyrifos residue was found in 44% of cauliflower samples with 91% of samples higher than MRL. The residue was found in 68% of cabbage samples with 53% of samples higher than MRL. For eggplant, the residue was found in 80% of the samples with 65% of samples higher than MRL. The risk assessment based on the residue level found in this study shows a potential health hazard of having a high concentration of chlorpyrifos residue in locally grown vegetables.
RESUMO
Recently, health hazards, such as kidney damage, have been reported owing to the ingestion of a health food product, so-called "foods with functional claims (FFC)'', containing beni-koji (red yeast rice). Although not an expected compound in the FFC, the detection of puberulic acid has also been reported. Further investigations of these health food products, such as the identification of other unintended compounds and clarifying the health impacts of puberulic acid, are required. To clarify the causes of these health issues, we investigated the presence of unintended compounds in the FFC containing beni-koji using comprehensive instrumental analyses. Using differential analysis, novel compounds 1 and 2 were detected as unexpected components between the samples with and without adverse event reports. Although limited to the samples available for analyses in this study, both compounds 1 and 2 were detected in all the samples that also contained puberulic acid. Compounds 1 and 2, with molecular formulas of C23H34O7 and C28H42O8, respectively, may be lovastatin derivatives. Their structures were confirmed using NMR analyses and are novel natural compounds. For definitive confirmation, we are in the process of synthesizing compounds 1 and 2 from lovastatin. The route of contamination of these compounds are currently under investigation. The findings of this study could be used to address the growing health hazards associated with health food products.
RESUMO
Microplastic contamination in agricultural soil is an emerging problem worldwide as it contaminates the food chain. Therefore, this research investigated the distribution of microplastics (MPs) in agricultural soils without mulch at various depths (0-5, 5-10, and 10-15 cm) across different zones: rural, local market, industrial, coastal, and research areas. The detection of MP types and morphology was conducted using FTIR and fluorescence microscopy, respectively. Eight types of MPs were identified, including high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyvinyl fluoride (PVF), polyvinyl alcohol (PVA), and polytetrafluoroethylene (PTFE), with concentrations ranging from 0.6 ± 0.21 to 3.71 ± 2.36 MPs/g of soil. The study found no significant trends in MP concentration, with ranges of 0-2.1 ± 0.38, 0-2.87 ± 0.55, and 0-2.0 ± 0.34 MPs/g of soil at depths of 0-5 cm, 5-10 cm, and 10-15 cm, respectively. The highest MP quantity was recorded at 8.67 in coastal area, while the lowest was 6.44 in the local market area. Various MP shapes, e.g., fiber, film, pellet, fragment, and irregular, were observed across all layers. PCA suggested irrigation and organic manure as potential sources of MPs. The estimated concentrations of MPs possessed low non-carcinogenic and carcinogenic risks to the farming community of Bangladesh.
RESUMO
This study investigated particle and volatile organic compound (VOC) emission rates (ER) from 3D pens, which are increasingly popular in children's toys. Nine filaments and two 3D pens were evaluated using a flow tunnel, a scanning mobility particle sizer, a proton-transfer-reaction time-of-flight mass spectrometer for particles, and a thermal desorption-gas chromatography-mass spectrometer for VOCs. Results showed that the ERs varied with the pen type, filament, and brand. The particle ER was highest for acrylonitrile butadiene styrene (ABS), followed by polylactic acid (PLA) and polycaprolactone (PCL). Notably, ERs of 83 % and 33 % of ABS and PLA filaments exceeded the maximum allowable particle ER (MAER; 5 × 109 particles/min) for 3D printers but were lower than the VOC MAER (173 µg/min in the office). Different filaments emitted diverse VOCs; ABS emitted styrene and benzene, PLA emitted lactide, and PCL emitted phenol. While particle ERs from 3D pens were comparable to those from printers, the total VOC ERs from 3D pens were slightly lower. Caution is warranted when using 3D pens because of potential health risks, especially their prolonged use, proximity to the breathing zone, and usage by children. This study highlights the need for considering particles and VOCs when assessing the safety of 3D pens, emphasizing awareness of potential hazards, particularly in child-oriented settings.
Assuntos
Compostos Orgânicos Voláteis , Compostos Orgânicos Voláteis/análise , Monitoramento Ambiental/métodos , Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Poluição do Ar em Ambientes Fechados/estatística & dados numéricos , Poliésteres/análise , Impressão Tridimensional , Material Particulado/análiseRESUMO
INTRODUCTION: Needlestick injuries (NSIs) represent a significant occupational health risk in healthcare settings. These injuries, caused by contaminated sharps such as needles, vials, and scalpel blades, can lead to percutaneous exposure to infectious materials. Despite the severity of NSIs, they often go unreported, highlighting a critical gap in occupational safety protocols. AIMS: This study aimed to investigate the occurrence of NSIs among healthcare workers (HCWs) by sex, profession, and working areas. It also sought to explore the underlying reasons for these injuries and the factors contributing to their underreporting. METHODOLOGY: Adhering to the RECORD guidelines (Reporting of studies Conducted using Observational Routinely Collected Data), this record-based study involved a retrospective analysis of reported NSIs. Data were collected from voluntary reports by HCWs who experienced NSIs or exposure to potentially infectious materials such as blood and body fluids. Statistical analysis was conducted using IBM SPSS Statistics for Windows, Version 16 (Released 2007; IBM Corp., Armonk, New York) and Microsoft Excel 2010 (Microsoft Corporation, Redmond, Washington). RESULTS: Data from 142 participants indicated a higher proportion of females experiencing NSIs compared to males, with rates of 57.7% pre-COVID and 60.6% during COVID. There were notable shifts in NSI rates across professions, with increases observed among staff nurses and ward attendants/helpers. Analysis of injury circumstances revealed a decrease in sampling procedure-related injuries but an increase during intravenous procedures and biomedical waste segregation. Injuries occurring on the right-hand index finger decreased from 52.1% pre-COVID to 31% during COVID, while those on the left-hand index finger increased from 19.7% pre-COVID to 39.4% during COVID. Statistically significant associations were found between the injury site and the place of occurrence (p=0.021). Healthcare professionals commonly cleansed the site with disinfectants and used personal protective equipment (PPE) kits, with increased PPE usage noted during the COVID-19 pandemic. These findings emphasize the evolving dynamics of NSIs among HCWs and underscore the importance of tailored preventive measures during pandemics.
RESUMO
To accurately characterize human health hazards, human, animal, and mechanistic data must be integrated and the relevance to the research question of all three lines of evidence must be considered. Mechanistic data are often critical to the full integration of animal and human data and to characterizing relevance and uncertainty. This novel evidence integration framework (EIF) provides a method for synthesizing data from comprehensive, systematic, quality-based assessments of the epidemiological and toxicological literature, including in vivo and in vitro mechanistic studies. It organizes data according to both the observed human health effects and the mechanism of action of the chemical, providing a method to support evidence synthesis. The disease-based component uses the evidence of human health outcomes studied in the best quality epidemiological literature to organize the toxicological data according to authors' stated purpose, with the pathophysiology of the disease determining the potential relevance of the toxicological data. The mechanism-based component organizes the data based on the proposed mechanisms of effect and data supporting events leading to each endpoint, with the epidemiological data potentially providing corroborating information. The EIF includes a method to cross-classify and describe the concordance of the data, and to characterize its uncertainty. At times, the two methods of organizing the data may lead to different conclusions. This facilitates identification of knowledge gaps and shows the impact of uncertainties on the strength of causal inference.
Assuntos
Substâncias Perigosas , Humanos , Medição de Risco/métodos , Animais , Substâncias Perigosas/toxicidadeRESUMO
Dietary deficiency of selenium is a global health hazard. Supplementation of organic selenopeptides via food crops is a relatively safe approach. Selenopeptides with heterogeneous selenium-encoded isotopes or a poorly fragmented peptide backbone remain unidentified in site-specific selenoproteomic analysis. Herein, we developed the Se-Pair Search, a UniProtKB-FASTA-independent peptide-matching strategy, exploiting the fragmentation patterns of shared peptide backbones in selenopeptides to optimize spectral interpretation, along with developing new selenosite assignment schemes (steps 1-3) to standardize selenium-localization data reporting for the selenoproteome community and thereby facilitating the discovery of unexpected selenopeptides. Using selenium-biofortified rice under cooking, fermentation, and high-temperature and high-pressure processing conditions as a pyrolysis-thermolysis dietary model, we probed the single-molecule-level kinetic evolution of the novel selenopeptide "KKSe(M)R" with qual-quantitative information on graph-theory-oriented localization calculations, abundance patterns, activation energy, and rate constants at a selenoproteome-wide scale. We ground-truth-annotated thirteen pyrolysis-thermolysis products and inferred four pyrolysis-thermolysis pathways to characterize the formation reactivity of the main intermediate variables of KKSe(M)R and constructed an advanced probe-type ultrasound technique prior to pyrolysis-thermolysis conditions for minimizing loss of KKSe(M)R during processing. Importantly, we reveal the unappreciated pyro-excitation diversion of KKSe(M)R at pyrolysis-thermolysis time and temperature matrices. These findings provide pioneering theoretical guidance for controlling dietary selenium supplementation within the safety thresholds.
Assuntos
Temperatura Alta , Oryza , Peptídeos , Pirólise , Selênio , Selênio/química , Selênio/metabolismo , Peptídeos/química , Peptídeos/metabolismo , Oryza/química , Oryza/metabolismo , Culinária , Manipulação de Alimentos/métodos , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , CinéticaRESUMO
With climate change fueling more frequent and intense periods of hot weather, heat stress management programs are becoming increasingly important for protecting the health and safety of workers in the Canadian mining industry. While the inclusion of heat-mitigation measures such as those provided by the American College of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs) are commonly employed by industry, there is a need to develop more comprehensive industry-specific measures for heat stress prevention and management. To better understand current heat management practices and identify opportunities for improvement, an exploratory survey of 51 employees responsible for health and safety at underground mining (n = 35), and surface operations (n = 16) (e.g., open-pit mining, milling, smelting, and exploration site) was conducted in Canada. The respondents answered 50 questions related to workplace heat stress management, including descriptors of the workplace environment, perceived heat stress hazard, administration of heat stress management programming, heat stress emergency procedures, environmental monitoring strategies, and knowledge of mining-specific regulations related to heat stress. Twenty-four managers (47%) reported that heat-related illnesses led to restricted duty or lost time claims at their site, with a median of 5 [IQR: 2-10, max: 30] reportable heat-related illnesses occurring per site annually. Many also felt that heat-related illnesses are under-reported by their workforce (n = 36, 71%). Most sites reported established heat stress management programs to prevent heat illness (n = 43, 84%), typically based on the TLVs (n = 38, 75%). Although some organizations do conduct pre-task evaluations for heat stress (n = 30, 59%), more than half do not conduct post-job evaluations (n = 28, 55%) or pre-employment screening for heat stress vulnerability (n = 3, 6%). While our findings indicate that the health and safety managers recognize the hazard posed by heat and have stated practices to help address the hazard, we also observed inconsistencies in heat stress management programming across the sample. Developing and adopting a standard heat stress management and reporting system would be an important step toward protecting workers from existing and emerging threats from extreme heat and climate change.
Assuntos
Transtornos de Estresse por Calor , Mineração , Humanos , Canadá , Transtornos de Estresse por Calor/prevenção & controle , Inquéritos e Questionários , Exposição Ocupacional , Adulto , Masculino , Temperatura Alta , Doenças Profissionais/prevenção & controle , Doenças Profissionais/epidemiologia , Monitoramento Ambiental/métodos , Local de Trabalho , Feminino , Pessoa de Meia-Idade , Saúde OcupacionalRESUMO
Urbanization is a phenomenon that shows the expansion of urban areas in conjunction with industrial and economic progress. Rapid world urbanization is caused by the swift rise in urban residents as a proportion of the population. Efforts to examine the quality of urban life and urbanization as distinct risk factors for mental illness within specific age groups have been made. However, the issue remains contentious and largely unresolved. Urban mental health issues, such as substance abuse, fear of crime, poverty, and ethnicity, are associated with factors like depression, aggression, fear, sadness, and personality disorders. The entire gamut of the population, particularly adult males and females, is affected by these impacts of urbanization. The size of the population increases the prevalence of the preview study. India is expected to concentrate highly on the whole urban population, but this might inadvertently cause harm to urban residents. This review discusses the impact of urbanization on mental health and well-being. We search via PubMed (Medline), Google Scholar, and databases like WHO. The language of the study is English, and other language articles are excluded. The mental health challenges associated with urbanization impact the entire population, with a notable emphasis on adult males and females. They are raising awareness about various urban programs designed for urban populations. It will function as a coordinator of change in a rapidly modified Indian society to spread awareness about mental illnesses throughout all segments of society.
RESUMO
The exposure to respirable crystalline silica found in granite dust presents significant health hazards to quarry workers and nearby communities, including silicosis and various respiratory ailments. This study evaluates the efficacy of various pollution control measures implemented in granite quarries. It aimed to provide a comprehensive critical assessment of the effectiveness of various dust control measures, considering their mechanisms, impact on air quality, and implications for worker health and community welfare. The strategy involved compiling and systematically analysing existing research articles, literature, and industry reports. The investigation identified three primary categories of measures: engineering controls, water-based suppression methods, and technological solutions. The study highlighted the significance of environmental impact and sustainability factors in selecting measures. These factors include water and energy consumption, production of secondary pollutants, long-term ecological effects, regulatory compliance, and cost-effectiveness. Operators and policymakers should utilize integrated, context-specific, inventive, and interdisciplinary strategies to efficiently control particle emissions from granite quarrying.
Assuntos
Poeira , Dióxido de Silício , Poeira/prevenção & controle , Humanos , Exposição Ocupacional/prevenção & controle , Poluição do Ar/prevenção & controleRESUMO
Although desert dust promotes morbidity and mortality, it is exempt from regulations. Its health effects have been related to its inflammatory properties, which can vary between source regions. It remains unclear which constituents cause this variability. Moreover, whether long-range transported desert dust potentiates the hazardousness of local particulate matter (PM) is still unresolved. We aimed to assess the influence of long-range transported desert dust on the inflammatory potency of PM2.5 and PM10 collected in Cape Verde and to examine associated constituents. During a reference period and two Saharan dust events, 63 PM2.5 and PM10 samples were collected at four sampling stations. The content of water-soluble ions, elements, and organic and elemental carbon was measured in all samples and endotoxins in PM10 samples. The PM-induced release of inflammatory cytokines from differentiated THP-1 macrophages was evaluated. The association of interleukin (IL)-1ß release with PM composition was assessed using principal component (PC) regressions. PM2.5 from both dust events and PM10 from one event caused higher IL-1ß release than PM from the reference period. PC regressions indicated an inverse relation of IL-1ß release with sea spray ions in both size fractions and organic and elemental carbon in PM2.5. The PC with the higher regression coefficient suggested that iron and manganese may contribute to PM2.5-induced IL-1ß release. Only during the reference period, endotoxin content strongly differed between sampling stations and correlated with inflammatory potency. Our results demonstrate that long-range transported desert dust amplifies the hazardousness of local air pollution and suggest that, in PM2.5, iron and manganese may be important. Our data indicate that endotoxins are contained in local and long-range transported PM10 but only explain the variability in inflammatory potency of local PM10. The increasing inflammatory potency of respirable and inhalable PM from desert dust events warrants regulatory measures and risk mitigation strategies.