Multifunctional Sr,Mg-Doped Mesoporous Bioactive Glass Nanoparticles for Simultaneous Bone Regeneration and Drug Delivery.

Mesoporous bioactive glass nanoparticles (MBGNs) doped with therapeutical ions present multifunctional systems that enable a synergistic outcome through the dual delivery of drugs and ions. The aim of this study was to evaluate influence of co-doping with strontium and magnesium ions (SrMg-MBGNs) on the properties of MBGNs. A modified microemulsion-assisted sol-gel synthesis was used to obtain particles, and their physicochemical properties, bioactivity, and drug-loading/release ability were evaluated. Indirect biological assays using 2D and 3D cell culture models on human bone marrow-derived mesenchymal stem cells (hBM-MSCs) and endothelial EA.hy926 cells, respectively, were used to determine biocompatibility of MBGNs, their influence on alkaline phosphatase (ALP) production, calcium deposition, and cytoskeletal organization. Results showed that Sr,Mg-doping increased pore volume and solubility, and changed the mesoporous structure from worm-like to radial-dendritic, which led to a slightly accelerated drug release compared to pristine MBGNs. Biological assays confirmed that particles are biocompatible, and have ability to slightly induce ALP production and calcium deposition of hBM-MSCs, as well as to significantly improve the proliferation of EA.hy926 compared to biochemical stimulation via vascular endothelial growth factor (VEGF) administration or regular media. Fluorescence staining revealed that SrMg-MBGNs had a similar effect on EA.hy926 cytoskeletal organization to the VEGF group. In conclusion, Sr,Mg-MBGNs might be considered promising biomaterial for biomedical applications.

Cu-Doped Spherical P2-Type Na0.7Fe0.23-xCuxMn0.77O2 Cathode for High-Performance Sodium-Ion Batteries.

Sodium-ion batteries (SIBs), owing to their abundant resources and cost-effectiveness, have garnered considerable interest in the realm of large-scale energy storage. The properties of cathode materials profoundly affect the cycle stability and specific capacity of batteries. Herein, a series of Cu-doped spherical P2-type Na0.7Fe0.23-xCuxMn0.77O2 (x = 0, 0.05, 0.09, and 0.14, x-NFCMO) was fabricated using a convenient hydrothermal method. The successful doping of Cu efficaciously mitigated the Jahn-Teller effect, augmented the electrical conductivity of the material, and diminished the resistance to charge transfer. The distinctive spherical structure remained stable and withstood considerable volumetric strain, thereby improving the cyclic stability of the material. The optimized 0.09-NFCMO cathode exhibited a high specific capacity of 168.6 mAh g-1 at 100 mA g-1, a superior rate capability (90.9 mAh g-1 at 2000 mA g-1), and a good cycling stability. This unique structure design and doping approach provides new insights into the design of advanced electrode materials for sodium-ion batteries.

Structure engineering with sodium doping for cobalt-free Li-rich layered oxide toward improving electrochemical stability.

Structure engineering of the Li-rich layered cathodes to overcome insufficient structural stability and the rapid decay of capacity and voltage is crucial for commercializing of the materials for the lithium-ion batteries. Alkali metal element doping at the lithium sites has proven to be a feasible approach to boost the performance of the Li-rich layered oxides. Herein, the Na+-doping strategy in the lithium slabs is introduced to modify the structure of the cobalt-free layered Li-rich oxide, Li1.2Ni0.2Mn0.6O2. It is revealed that the doped Na+ ions can promote the activation of the Li2MnO3 phase, endowing the materials with high initial discharge capacity of 284.2 mAh g-1 at 0.1C. Due to the pillaring effect of the doped Na+ ions in the lithium slabs and the induced formation of oxygen vacancies, the electrochemical stability of the material is significantly improved, providing a capacity retention of 94.0 % after 100 cycles at 0.5C. The voltage decay per cycle is only 2.0 mV, less than 3.2 mV of the Li1.2Ni0.2Mn0.6O2. The results suggest that the facile strategy of introducing Na+ ions into the lithium slabs is an efficient approach for optimizing structure design of the Li-rich layered oxides for the lithium-ion batteries.

The effect of Zn doping on the structure, phase transformation and electric properties of 0.5BZT-0.5BCT materials.

In the current study, an improved method of adding Zn ion doping to the 0.5BZT-0.5BCT-based films with high pyroelectric properties was designed. Under different Zn ion doping ratios, the structure, dielectric constant, phase transition relationship and other characteristics of the test product were analyzed experimentally to obtain the optimal ratio parameters. The experimental results demonstrate that the dielectric properties of the 0.5BZT-0.5BCT-xZn-based films proposed in this study can be far superior to those of other films under the optimal preparation process. The optimal dielectric properties and ferroelectric properties are obtained when the doped data are 0.008. Considering the comprehensive dielectric and energy storage capacity, the optimal doping ratio is 0.01, which can take into account dielectric data and energy storage performance. The energy storage density is 1.842 J / c m 3 , and the energy storage efficiency exceeds 30%. From 0 to 0.02, the properties of the material, such as the hysteresis loop and phase transition relationship are excellent. The properties of the materials studied in this study are excellent, and they are excellent candidate materials for the future application of ferroelectric materials, and provide ideas for related work.

Theoretical Study of the Phonon Energy and Specific Heat of Ion-Doped LiCsSO4-Bulk and Nanoparticles.

Using a microscopic model, the temperature dependence of two phonon modes, ω0 = 32 cm-1 and 72 cm-1, and their damping of the ferroelastic LiCsSO4 compound, are calculated within Green's function technique. It is observed that the first mode increases whereas the second one decreases with increasing temperature T. This different behavior is explained with different sign of the anharmonic spin-phonon interaction constant. At the ferroelastic phase transition temperature TC, there is a kink in both modes due to the spin-phonon interaction. The phonon damping increases with T, and again shows an anomaly at TC. The contributions of the spin-phonon and phonon-phonon interactions are discussed. TC is reduced by decreasing the nanoparticle size, and can be enhanced by doping with K, Rb and NH4 ions at the Cs site. TC decreases by doping with Na, K or Rb on the Li site. The specific heat Cp also shows a kink at TC. Cp decreases with decreasing nanoparticle size and the peak disappears, whereas Cp increases with increasing K ion doping concentration.

Theoretical Study of the Magnetic and Optical Properties of Ion-Doped LiMPO4 (M = Fe, Ni, Co, Mn).

Using a microscopic model and Green's function theory, we calculated the magnetization and band-gap energy in ion-doped LiMPO4 (LMPO), where M = Fe, Ni, Co, Mn. Ion doping, such as with Nb, Ti, or Al ions at the Li site, induces weak ferromagnetism in LiFePO4. Substituting Li with ions of a smaller radius, such as Nb, Ti, or Al, creates compressive strain, resulting in increased exchange interaction constants and a decreased band-gap energy, Eg, in the doped material. Notably, Nb ion doping at the Fe site leads to a more pronounced decrease in Eg compared to doping at the Li site, potentially enhancing conductivity. Similar trends in Eg reduction are observed across other LMPO4 compounds. Conversely, substituting ions with a larger ionic radius than Fe, such as Zn and Cd, causes an increase in Eg.

Human T-Cell Responses to Metallic Ion-Doped Bioactive Glasses.

Biomaterials are extensively used as replacements for damaged tissue with bioactive glasses standing out as bone substitutes for their intrinsic osteogenic properties. However, biomaterial implantation has the following risks: the development of implant-associated infections and adverse immune responses. Thus, incorporating metallic ions with known antimicrobial properties can prevent infection, but should also modulate the immune response. Therefore, we selected silver, copper and tellurium as doping for bioactive glasses and evaluated the immunophenotype and cytokine profile of human T-cells cultured on top of these discs. Results showed that silver significantly decreased cell viability, copper increased the T helper (Th)-1 cell percentage while decreasing that of Th17, while tellurium did not affect either cell viability or immune response, as evaluated via multiparametric flow cytometry. Multiplex cytokines assay showed that IL-5 levels were decreased in the copper-doped discs, compared with its undoped control, while IL-10 tended to be lower in the doped glass, compared with the control (plastic) while undoped condition showed lower expression of IL-13 and increased MCP-1 and MIP-1ß secretion. Overall, we hypothesized that the Th1/Th17 shift, and specific cytokine expression indicated that T-cells might cross-activate other cell types, potentially macrophages and eosinophils, in response to the scaffolds.

Ferromagnetic Insulating Ground-State Resolved in Mixed Protons and Oxygen Vacancies-Doped La0.67Sr0.33CoO3 Thin Films via Ionic Liquid Gating.

The realization of ferromagnetic insulating ground state is a critical prerequisite for spintronic applications. By applying electric field-controlled ionic liquid gating (ILG) to stoichiometry La0.67Sr0.33CoO3 thin films, the doping of protons (H+) has been achieved for the first time. Furthermore, a hitherto-unreported ferromagnetic insulating phase with a remarkably high Tc up to 180 K has been observed which can be attributed to the doping of H+ and the formation of oxygen vacancies (VO). The chemical formula of the dual-ion migrated film has been identified as La2/3Sr1/3CoO8/3H2/3 based on combined Co L23-edge absorption spectra and configuration interaction cluster calculations, from which we are able to explain the ferromagnetic ground state in terms of the distinct magnetic moment contributions from Co ions with octahedral (Oh) and tetrahedral (Td) symmetries following antiparallel spin alignments. Further density functional theory calculations have been performed to verify the functionality of H+ as the transfer ion and the origin of the novel ferromagnetic insulating ground state. Our results provide a fundamental understanding of the ILG regulation mechanism and shed light on the manipulating of more functionalities in other correlated compounds through dual-ion manipulation.

Preparation, biological activity and antibacterial properties of tantalum surface-doped Ca2+/Zn2+nanorods.

In this research, we utilize porous tantalum, known for its outstanding elastic modulus and biological properties, as a base material in biomedical applications. The human skeletal system is rich in elements like Ca and Zn. The role of Zn is crucial for achieving a spectrum of sterilizing effects, while Ca is known to effectively enhance cell differentiation and boost cellular activity. The focus of this study is the modification of porous tantalum using a hydrothermal method to synthesize Ca2+/Zn2+-doped Ta2O5nanorods. These nanorods are subjected to extensive characterization techniques to confirm their structure and composition. Additionally, their biological performance is evaluated through a range of tests, including antibacterial assessments, MTT assays, and bacteria/cell scanning electron microscopy (SEM) analyses. The objective is to determine the most effective method of surface modification for porous tantalum, thereby laying a foundational theoretical framework for its surface enhancement.

Band Gap and Polarization Tuning of Ion-Doped XNbO3 (X = Li, K, Na, Ag) for Photovoltaic and Energy Storage Applications.

Using a microscopic model and Green's function theory, we have calculated the band gap energy and the polarization of LiNbO3, KNbO3, AgNbO3, and NaNbO3. The effects by substitution of different ions at A or/and B sites for doping concentration x = 0-0.1 are studied. The observed different tuning of these properties is discussed for the possibility of photovoltaic and energy storage applications of these compounds. They should have a large polarization and narrow band gap. It is shown that the band gap of all substances decreases or increases with increasing Fe or Zn dopant at the Nb site, respectively. But the substitution, for example, of Ba at the A site, leads to different behaviors of these materials. The polarization increases by Ba doping at the A site and decreases by Fe doping at the Nb site. For example, by Ba/Fe, Ba/Ni co-doping (Ba at the A site and Fe, Ni at the B site) we observe both an enhanced polarization and reduced band gap.

Novel Zn0.079V2O5·0.53H2O/Graphene aerogel as high-rate and long-life cathode materials of aqueous zinc-ion batteries.

Aqueous zinc-ion batteries (ZIBs) have attracted more and more attention due to their advantages of low cost, high safety and environmental protection. Unfortunately, the unsatisfactory capacity at high current density and long-term cycling performance of cathode materials hinder the development of ZIBs. Here, a novel Zn0.079V2O5·0.53H2O/graphene (ZVOH@rGO) hybrid aerogel composed of ultrathin Zn0.079V2O5·0.53H2O (ZVOH) nanoribbons and 3D continuous graphene conductive network was successfully prepared and used as cathode of ZIBs. Taking advantage of the synergistic effects associated with ion doping, morphology control and unique aerogel structure, the ZVOH@rGO electrode demonstrated ultrafast charge/discharge capability and remarkable cycling stability: A high reversible capacity of 286.7 mAh g-1 was achieved at a current density as large as 30 A g-1, and an impressive capacity retention ratio of 75.6 % was realized over 9800 ultra-long cycles at 12 A g-1. This work is of great significance for the synthesis modification of vanadium oxides and the development of high performance ultrafast charge-discharge ZIBs.

Bio-Inspired Organic Synaptor with In Situ Ion-Doped Ultrathin Polyelectrolyte Containing Acetylcholine-Like Cation.

An ion-based synaptic transistor (synaptor) is designed to emulate a biological synapse using controlled ion movements. However, developing a solid-state electrolyte that can facilitate ion movement while achieving large-scale integration remains challenging. Here, a bio-inspired organic synaptor (BioSyn) with an in situ ion-doped polyelectrolyte (i-IDOPE) is demonstrated. At the molecular scale, a polyelectrolyte containing the tert-amine cation, inspired by the neurotransmitter acetylcholine is synthesized using initiated chemical vapor deposition (iCVD) with in situ doping, a one-step vapor-phase deposition used to fabricate solid-state electrolytes. This method results in an ultrathin, but highly uniform and conformal solid-state electrolyte layer compatible with large-scale integration, a form that is not previously attainable. At a synapse scale, synapse functionality is replicated, including short-term and long-term synaptic plasticity (STSP and LTSP), along with a transformation from STSP to LTSP regulated by pre-synaptic voltage spikes. On a system scale, a reflex in a peripheral nervous system is mimicked by mounting the BioSyns on various substrates such as rigid glass, flexible polyethylene naphthalate, and stretchable poly(styrene-ethylene-butylene-styrene) for a decentralized processing unit. Finally, a classification accuracy of 90.6% is achieved through semi-empirical simulations of MNIST pattern recognition, incorporating the measured LTSP characteristics from the BioSyns.

Vanadate-Based Fibrous Electrode Materials for High Performance Aqueous Zinc Ion Batteries.

Aqueous zinc-ion batteries (AZIBs) are considered as attractive energy storage systems with great promise owing to their low cost, environmental friendliness and high safety. Nevertheless, cathode materials with stable structure and rapid diffusion of zinc ions are in great demand for AZIBs. In this work, a new kind of potassium vanadate compound (KV3 O8 ) is synthesized with fibrous morphology as an excellent cathode material for AZIBs, which shows outstanding electrochemical performance. KV3 O8 exhibits a high discharge capacity of 556.4 mAh g-1 at 0.8 A g-1 , and the capacity retention is 81.3% at 6 A g-1 even after a long cycle life of 5000 cycles. The excellent performance of the KV3 O8 cathode is benefited from the structural stability, sufficient active sites, and high conductivity, which is revealed by in situ X-ray diffraction and various other characterizations. This work offers a new design strategy into fabricating high efficiency cathode materials for AZIBs and beyond.

Turning Nonemissive CsPb2Br5 Crystals into High-Performance Scintillators through Alkali Metal Doping.

X-ray scintillators have utility in radiation detection, therapy, and imaging. Various materials, such as halide perovskites, organic illuminators, and metal clusters, have been developed to replace conventional scintillators due to their ease of fabrication, improved performance, and adaptability. However, they suffer from self-absorption, chemical instability, and weak X-ray stopping power. Addressing these limitations, we employ alkali metal doping to turn nonemissive CsPb2Br5 into scintillators. Introducing alkali metal dopants causes lattice distortion and enhances electron-phonon coupling, which creates transient potential energy wells capable of trapping photogenerated or X-ray-generated electrons and holes to form self-trapped excitons. These self-trapped excitons undergo radiative recombination, resulting in a photoluminescence quantum yield of 55.92%. The CsPb2Br5-based X-ray scintillator offers strong X-ray stopping power, high resistance to self-absorption, and enhanced stability when exposed to the atmosphere, chemical solvents, and intense irradiation. It exhibits a detection limit of 162.3 nGyair s-1 and an imaging resolution of 21 lp mm-1.

Sb3+-Doped Indium-Based Metal Halide (Gua)3InCl6 with Efficient Yellow Emission.

In recent years, low-dimensional organic-inorganic hybrid metal halides (OIHMHs) have shown excellent photophysical properties due to their quantum structure, adjustable energy levels, and energy transfer between inorganic and organic components, which have attracted extensive attention from researchers. Herein, we synthesize a zero-dimensional (0D) OIHMH, Sb3+:(Gua)3InCl6, by introducing Sb3+ into (Gua)3InCl6, which undergoes a significant enhancement of the emission peak at 580 nm with the photoluminescence quantum yield (PLQY) boosted from 17.86 to 95.72% when excited at 340 nm. This boost in photoluminescence of the doped sample was studied by combining ultrafast femtosecond transient absorption, temperature-dependent photoluminescence (PL) spectra, and density functional theory (DFT) calculation, revealing the process of self-trapped exciton (STE) recombination to emit light at both Sb and In sites in this 0D structure simultaneously. This material with the lowest dark STE level at the In site for emission in the undoped sample can amazingly yield very strong emission in the doped sample, which has never been observed before. Finally, we tested its application in a photoelectric device. This work not only helps to gain a deeper understanding of the formation of STEs in In-based halides but also plays a certain guiding role in the design of new luminescent materials.

Synergistic Effect of Ion Doping and Type-II Heterojunction Construction and Ciprofloxacin Degradation by MIL-68(In,Bi)-NH2@BiOBr under Visible Light.

Heterojunction structure and ion doping techniques are viable tactics in facilitating the generation and separation of photogenerated electrons and holes in photocatalysis. In the current study, a novel Bi ion-doped MIL-68(In,Bi)-NH2@BiOBr (MIBN@BOB) type-II heterojunction was first synthesized in a one-step solvothermal reaction. Doping of Bi ions not only broadened the light-sensing range but also provided reliable anchor sites for the in situ growth of BiOBr. Meanwhile, the heterostructure supplied new channels for photogenerated carriers, accelerating the transfer and inhibiting the recombination of photogenerated electron-hole. The obtained MIBN@BOB exhibited enhanced photocatalytic performance (91.1%) than MIL-68(In)-NH2 (40.8%) and BiOBr (57.5%) in ciprofloxacin (CIP) degradation under visible light, with excellent reusability. Photocatalysts were characterized in detail, and a series of photoelectrochemical tests were utilized to analyze the photoelectric properties. MIBN@BOB were deduced to conform the electron conduction mechanism of conventional type-II heterojunctions. More importantly, based on the above experiments and density functional theory (DFT) calculation, BiOBr-Bi in MIBN@BOB can serve as the major active sites of CIP enrichment, and •O2- and 1O2 generated at the BiOBr interface can react with the adsorbed CIP directly. Lastly, the possible degradation products and pathways of CIP were analyzed by liquid chromatography-tandem mass spectrometry (LC/MS/MS). This study provides a reference for the construction of ion-doping-modified metal-organic framework (MOF)-based heterojunction photocatalysts and their application in antibiotic removal.

Promoting threshold voltage of P2-Na0.67Ni0.33Mn0.67O2 with Cu2+ cation doping toward high-stability cathode for sodium-ion battery.

P2-type Na0.67Ni0.33Mn0.67O2 has attracted considerable attraction as a cathode material for sodium-ion batteries owing to its high operating voltage and theoretical specific capacity. However, when the charging voltage is higher than 4.2 V, the Na0.67Ni0.33Mn0.67O2 cathode undergoes a detrimental irreversible phase transition of P2-O2, leading to a drastic decrease in specific capacity. To address this challenge, we implemented a Cu-doping strategy (Na0.67Ni0.23Cu0.1Mn0.67O2) in this work to stabilize the structure of the transition metal layer. The stabilization strategy involved reinforcing the transition metal-oxygen (TMO) bonds, particularly the MnO bond and inhibiting interlayer slip during deep desodiation. As a result, the irreversible phase transition voltage is delayed, with the threshold voltage increasing from 4.2 to 4.4 V. Ex-situ X-ray diffraction measurements revealed that the Na0.67Ni0.23Cu0.1Mn0.67O2 cathode maintains the P2 phase within the voltage window of 2.5-4.3 V, whereas the P2-Na0.67Ni0.33Mn0.67O2 cathode transforms entirely into O2-type Na0.67Ni0.33Mn0.67O2 when the voltage exceeds 4.3 V. Furthermore, absolute P2-O2 phase transition of the Na0.67Ni0.23Cu0.1Mn0.67O2 cathode occurred at 4.6 V, indicating that Cu2+ doping enhances the stability of the layer structure and increases the threshold voltage. The resulting Na0.67Ni0.23Cu0.1Mn0.67O2 cathode exhibited superior electrochemical properties, demonstrating an initial reversible specific capacity of 89.1 mAh/g at a rate of 2C (360 mA g-1) and retaining more than 78 % of its capacity after 500 cycles.

Cobalt ion doping and morphology tailoring enable superior zinc-ion storage in sodium vanadate nanoflowers.

Layered sodium vanadium materials have aroused increasing interest owing to their open layered structures and high theoretical capacity. Nevertheless, the strong electrostatic interactions between vanadium oxide layers and intercalated Zn2+ and the weak electronic conductivity severely limit their further development. Here, we design a series of cobalt ion-doped sodium vanadium electrode materials with nanoflower-like morphologies. Due to the open interlayer space and improved electron transfer enabled by cobalt ion preintercalation and sufficient contact area between the electrode and electrolyte provided by the three-dimensional (3D) flower-like morphology, the cobalt ion-doped sodium vanadate (CNVO-2) cathode exhibits excellent electrochemical performance, including an exceptional specific capacity (411 mA h g-1 at 0.5 A g-1) and ultrahigh structural stability (90.4 % capacity retention after 3000 cycles at 10 A g-1), outperforming many advanced ZIBs cathode materials. In addition, through various ex situ characterization techniques, an ionic exchange and multiple ion cointercalation mechanism is first revealed in sodium vanadate cathode material.

Metal Ion-Doped Hydroxyapatite-Based Materials for Bone Defect Restoration.

Hydroxyapatite (HA)-based materials are widely used in the bone defect restoration field due to their stable physical properties, good biocompatibility, and bone induction potential. To further improve their performance with extra functions such as antibacterial activity, various kinds of metal ion-doped HA-based materials have been proposed and synthesized. This paper offered a comprehensive review of metal ion-doped HA-based materials for bone defect restoration based on the introduction of the physicochemical characteristics of HA followed by the synthesis methods, properties, and applications of different kinds of metal ion (Ag+, Zn2+, Mg2+, Sr2+, Sm3+, and Ce3+)-doped HA-based materials. In addition, the underlying challenges for bone defect restoration using these materials and potential solutions were discussed.