Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros








Base de dados
Intervalo de ano de publicação
1.
Angew Chem Int Ed Engl ; 63(15): e202400539, 2024 Apr 08.
Artigo em Inglês | MEDLINE | ID: mdl-38332434

RESUMO

Sodium-ion batteries (SIBs) are recognized as promising energy storage devices. However, they suffer from rapid capacity decay at ultra-low temperatures due to high Na+ desolvation energy barrier and unstable solid electrolyte interphase (SEI). Herein, a weakly solvating electrolyte (WSE) with decreased ion-dipole interactions is designed for stable sodium storage in hard carbon (HC) anode at ultra-low temperatures. 2-methyltetrahydrofuran with low solvating power is incorporated into tetrahydrofuran to regulate the interactions between Na+ and solvents. The reduced Na+-dipole interactions facilitate more anionic coordination in the first solvation sheath, which consistently maintains anion-enhanced solvation structures from room to low temperatures to promote inorganic-rich SEI formation. These enable WSE with a low freezing point of -83.3 °C and faster Na+ desolvation kinetics. The HC anode thus affords reversible capacities of 243.2 and 205.4 mAh g-1 at 50 mA g-1 at -40 and -60 °C, respectively, and the full cell of HC||Na3V2(PO4)3 yields an extended lifespan over 250 cycles with high capacity retention of ~100 % at -40 °C. This work sheds new lights on the ion-dipole regulation for ultra-low temperature SIBs.

2.
Angew Chem Int Ed Engl ; 61(35): e202207645, 2022 Aug 26.
Artigo em Inglês | MEDLINE | ID: mdl-35793172

RESUMO

Lithium-metal batteries (LMBs) capable of operating stably at high temperature application scenarios are highly desirable. Conventional lithium-ion batteries could only work stably under 60 °C because of the thermal instability of electrolyte at elevated temperature. Here we design and develop a thermal stable electrolyte based on stable solvation structure using multiple ion-dipole interactions. The strong coordination in solvated structure of electrolyte defines the Li deposition behaviour and the evolution of solid electrolyte interphase at high temperature, which is important to achieve high Li Coulombic efficiency and avoid Li dendritic growth. For high mass loading LiFePO4 -Li cells, the cells at 60 °C with conventional electrolyte easily run into failures, but the cells with our electrolyte at 90 °C and 100 °C could cycle more than 120 and 50 cycles respectively. This work provides new insight into electrolyte design and contributes to the development of high temperature LMBs.

3.
Angew Chem Int Ed Engl ; 61(35): e202205967, 2022 Aug 26.
Artigo em Inglês | MEDLINE | ID: mdl-35789166

RESUMO

LiNix Coy Mnz O2 (x+y+z=1)||graphite lithium-ion battery (LIB) chemistry promises practical applications. However, its low-temperature (≤ -20 °C) performance is poor because the increased resistance encountered by Li+ transport in and across the bulk electrolytes and the electrolyte/electrode interphases induces capacity loss and battery failures. Though tremendous efforts have been made, there is still no effective way to reduce the charge transfer resistance (Rct ) which dominates low-temperature LIBs performance. Herein, we propose a strategy of using low-polarity-solvent electrolytes which have weak interactions between the solvents and the Li+ to reduce Rct , achieving facile Li+ transport at sub-zero temperatures. The exemplary electrolyte enables LiNi0.8 Mn0.1 Co0.1 O2 ||graphite cells to deliver a capacity of ≈113 mAh g-1 (98 % full-cell capacity) at 25 °C and to remain 82 % of their room-temperature capacity at -20 °C without lithium plating at 1/3C. They also retain 84 % of their capacity at -30 °C and 78 % of their capacity at -40 °C and show stable cycling at 50 °C.

4.
Chemphyschem ; 22(12): 1269-1285, 2021 06 16.
Artigo em Inglês | MEDLINE | ID: mdl-33635563

RESUMO

Non-additive effects in hydrogen bonds (HB) take place as a consequence of electronic charge transfers. Therefore, it is natural to expect cooperativity and anticooperativity in ion-water interactions. Nevertheless, investigations on this matter are scarce. This paper addresses the interactions of (i) the cations Li+ , Na+ , K+ , Be2+ , Mg2+ , and Ca2+ together with (ii) the anions F- , Cl- , Br- , NO3- and SO42- with water clusters (H2 O)n , n=1-8, and the effects of these ions on the HBs within the complete molecular adducts. We used quantum chemical topology tools, specifically the quantum theory of atoms in molecules and the interacting quantum atoms energy partition to investigate non-additive effects among the interactions studied herein. Our results show a decrease on the interaction energy between ions and the first neighbouring water molecules with an increment of the coordination number. We also found strong cooperative effects in the interplay between HBs and ion-dipole interactions within the studied systems. Such cooperativity affects considerably the interactions among ions with their first and second solvation shells in aqueous environments. Overall, we believe this article provides valuable information about how ion-dipole contacts interact with each other and how they relate to other interactions, such as HBs, in the framework of non-additive effects in aqueous media.

5.
Adv Mater ; 29(10)2017 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-28009480

RESUMO

Self-healing materials can repair damage caused by mechanical wear, thereby extending lifetime of devices. A transparent, self-healing, highly stretchable ionic conductor is presented that autonomously heals after experiencing severe mechanical damage. The design of this self-healing polymer uses ion-dipole interactions as the dynamic motif. The unique properties of this material when used to electrically activate transparent artificial muscles are demonstrated.

6.
J Chromatogr A ; 1322: 97-104, 2013 Dec 27.
Artigo em Inglês | MEDLINE | ID: mdl-24268821

RESUMO

Partition coefficients of fourteen organic compounds were determined in 10 or 20 different polymer/polymer aqueous two-phase systems (ATPS) all at physiological pH (0.15M NaCl in 0.01M phosphate buffer, pH 7.4). Solute-specific coefficients characterizing different types of solute-water interactions for the compounds examined were determined by the multiple linear regression analysis. It is shown that (i) the partition behavior for the polar organic compounds is affected not only by dipole-dipole and hydrogen-bond interactions with aqueous environment but, notably, in most cases also by dipole-ion interactions; (ii) it is possible to predict partition behavior for compounds with pre-determined solute-specific coefficients in ATPS with characterized solvent features; and (iii) linear combinations of the solute-specific coefficients for the organic compounds might be useful in the development of quantitative structure-activity relationship (QSAR) analysis to describe their odor detection threshold.


Assuntos
Compostos Orgânicos/química , Água/química , Ligação de Hidrogênio , Concentração de Íons de Hidrogênio , Estrutura Molecular , Polímeros/química , Relação Quantitativa Estrutura-Atividade , Solventes/química , Eletricidade Estática
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA