Effect of nitrogen fertilization and shading on morphogenesis, structure and leaf anatomy of Megathyrsus maximus genotypes.

The use of exotic grasses of African origin for pastures in Brazil has been a major advancement in livestock production, but little is known about the responses of these grasses to nitrogen fertilizers associated with shading. In this study, the morphogenetic, structural, and leaf anatomical characteristics of Megathyrsus maximus cultivars' Tamani and Quênia were investigated as a function of N dose and shade. Morphogenetic and structural characteristics and leaf anatomy were studied under three shading levels (0, 30, and 50 %) and four N doses (0, 100, 200, and 300 kg N ha-1) to simulate growth in a silvopastoral system. When comparing the cultivars, Quênia was more efficient in terms of phyllochron up to fertilization with 100 kg N ha-1. The leaf senescence rate of Tamani was higher than that of Quênia at the 30 and 50 % shade levels. The total area (TA) occupied by leaf tissues decreased in Quênia as a function of the increase in N fertilization, whereas the TA of Tamani did not change. The thickness of the adaxial epidermis was greater in Quênia (0.68 µm) than in Tamani (0.50 µm) when not fertilized. The area occupied by the mesophyll was greater in both cultivars when they received fertilization equivalent to 300 kg N ha-1. Quênia grass has a smaller phyllochron than Tamani grass, due to the rapid reconstruction of its photosynthetic apparatus, especially when it receives higher levels of nitrogen fertilization. However, Tamani grass has a greater distribution of plant tissues. The mesophyll area is larger in Tamani grass due to the greater presence of chloroplasts, which facilitates digestion by animals. The Tamani modified the leaf anatomical tissues more significantly in relation to shading, whereas the Quênia modified them in relation to N fertilization, which reinforces the suggestion of a more appropriate use of Tamani in silvopastoral systems.

Tribulus (Zygophyllaceae) as a case study for the evolution of C2 and C4 photosynthesis.

C2 photosynthesis is a photosynthetic pathway in which photorespiratory CO2 release and refixation are enhanced in leaf bundle sheath (BS) tissues. The evolution of C2 photosynthesis has been hypothesized to be a major step in the origin of C4 photosynthesis, highlighting the importance of studying C2 evolution. In this study, physiological, anatomical, ultrastructural, and immunohistochemical properties of leaf photosynthetic tissues were investigated in six non-C4 Tribulus species and four C4 Tribulus species. At 42°C, T. cristatus exhibited a photosynthetic CO2 compensation point in the absence of respiration (C*) of 21 µmol mol-1, below the C3 mean C* of 73 µmol mol-1. Tribulus astrocarpus had a C* value at 42°C of 55 µmol mol-1, intermediate between the C3 species and the C2 T. cristatus. Glycine decarboxylase (GDC) allocation to BS tissues was associated with lower C*. Tribulus cristatus and T. astrocarpus allocated 86% and 30% of their GDC to the BS tissues, respectively, well above the C3 mean of 11%. Tribulus astrocarpus thus exhibits a weaker C2 (termed sub-C2) phenotype. Increased allocation of mitochondria to the BS and decreased length-to-width ratios of BS cells, were present in non-C4 species, indicating a potential role in C2 and C4 evolution.

Reduced mesophyll conductance under chronic O3 exposure in poplar reflects thicker cell walls and increased subcellular diffusion pathway lengths according to the anatomical model.

Ozone (O3) is one of the most harmful and widespread air pollutants, affecting crop yield and plant health worldwide. There is evidence that O3 reduces the major limiting factor of photosynthesis, namely CO2 mesophyll conductance (gm), but there is little quantitative information of O3-caused changes in key leaf anatomical traits and their impact on gm. We exposed two O3-responsive clones of the economically important tree species Populus × canadensis Moench to 120 ppb O3 for 21 days. An anatomical diffusion model within the leaf was used to analyse the entire CO2 diffusion pathway from substomatal cavities to carboxylation sites and determine the importance of each structural and subcellular component as a limiting factor. gm decreased substantially under O3 and was found to be the most important limitation of photosynthesis. This decrease was mostly driven by an increased cell wall thickness and length of subcellular diffusion pathway caused by altered interchloroplast spacing and chloroplast positioning. By contrast, the prominent leaf integrative trait leaf dry mass per area was neither affected nor related to gm under O3. The observed relationship between gm and anatomy, however, was clone-dependent, suggesting that mechanisms regulating gm may differ considerably between closely related plant lines. Our results confirm the need for further studies on factors constraining gm under stress conditions.

Trait variation and performance across varying levels of drought stress in cultivated sunflower (Helianthus annuus L.).

Drought is a major agricultural challenge that is expected to worsen with climate change. A better understanding of drought responses has the potential to inform efforts to breed more tolerant plants. We assessed leaf trait variation and covariation in cultivated sunflower (Helianthus annuus L.) in response to water limitation. Plants were grown under four levels of water availability and assessed for environmentally induced plasticity in leaf stomatal and vein traits as well as biomass (performance indicator), mass fractions, leaf area, leaf mass per area, and chlorophyll content. Overall, biomass declined in response to stress; these changes were accompanied by responses in leaf-level traits including decreased leaf area and stomatal size, and increased stomatal and vein density. The magnitude of trait responses increased with stress severity and relative plasticity of smaller-scale leaf anatomical traits was less than that of larger-scale traits related to construction and growth. Across treatments, where phenotypic plasticity was observed, stomatal density was negatively correlated with stomatal size and positively correlated with minor vein density, but the correlations did not hold up within treatments. Four leaf traits previously shown to reflect major axes of variation in a large sunflower diversity panel under well-watered conditions (i.e. stomatal density, stomatal pore length, vein density, and leaf mass per area) predicted a surprisingly large amount of the variation in biomass across treatments, but trait associations with biomass differed within treatments. Additionally, the importance of these traits in predicting variation in biomass is mediated, at least in part, through leaf size. Our results demonstrate the importance of leaf anatomical traits in mediating drought responses in sunflower, and highlight the role that phenotypic plasticity and multi-trait phenotypes can play in predicting productivity under complex abiotic stresses like drought.

A taxonomic revision of Rhizophora L. (Rhizophoraceae) in Thailand.

A taxonomic revision of Rhizophora L. (Rhizophoraceae) in Thailand is presented. Two species, R. apiculata Blume and R. mucronata Poir., are enumerated with updated morphological descriptions, illustrations and a taxonomic identification key, together with notes on distributions, habitats and ecology, phenology, conservation assessments, etymology, vernacular names, uses, and specimens examined. Three names in Rhizophora, are lectotypified: R. apiculata and two associated synonyms of R. mucronata (i.e., R. latifolia Miq. and R. macrorrhiza Griff.). R. longissima Blanco, a synonym of R. mucronata, is neotypified. All two Rhizophora species have a conservation assessment of Least Concern (LC). Based on the morphological identification, these two species can be distinguished from one another by the shape and width of the leaf laminae and the length of a terminal stiff point of the leaf laminae; the type and position of the inflorescences and the number of flowers per inflorescence; the character and color of the bracteoles; the presence or absence of the flower pedicels; the shape of the mature flower buds; the shape, color, and texture of the sepals; the shape, character, and the presence or absence of hairs of the petals; the number of stamens per flower; the size of the fruits; the color and size of the hypocotyls; the color and diameter of the cotyledonous cylindrical tubes; and the color of the colleters and exudate. The thick cuticles, sunken stomata, large hypodermal cells, and cork warts are adaptive anatomical features of leaves in Rhizophora that live in the mangrove environments. The pollen grains of Thai Rhizophora species are tricolporate, prolate spheroidal or oblate spheroidal shapes, small-sized, and reticulate exine sculpturing.

Identification and characterization of a new species of Taxus - Taxus qinlingensis by multiple taxonomic methods.

BACKGROUND: The taxonomy of Taxus Linn. remains controversial due to its continuous phenotypic variation and unstable topology, thus adversely affecting the formulation of scientific conservation strategies for this genus. Recently, a new ecotype, known as Qinling type, is mainly distributed in the Qinling Mountains and belongs to a monophyletic group. Here, we employed multiple methods including leaf phenotype comparison (leaf shapes and microstructure), DNA barcoding identification (ITS + trnL-trnF + rbcL), and niche analysis to ascertain the taxonomic status of the Qinling type. RESULTS: Multiple comparisons revealed significant differences in the morphological characters (length, width, and length/width ratio) among the Qinling type and other Taxus species. Leaf anatomical analysis indicated that only the Qinling type and T. cuspidata had no papilla under the midvein or tannins in the epicuticle. Phylogenetic analysis of Taxus indicated that the Qinling type belonged to a monophyletic group. Moreover, the Qinling type had formed a relatively independent niche, it was mainly distributed around the Qinling Mountains, Ta-pa Mountains, and Taihang Mountains, situated at an elevation below 1500 m. CONCLUSIONS: Four characters, namely leaf curvature, margin taper, papillation on midvein, and edges were put forward as primary indexes for distinguishing Taxus species. The ecotype Qingling type represented an independent evolutionary lineage and formed a unique ecological niche. Therefore, we suggested that the Qingling type should be treated as a novel species and named it Taxus qinlingensis Y. F. Wen & X. T. Wu, sp. nov.

The Arabidopsis leaf quantitative atlas: a cellular and subcellular mapping through unified data integration.

Quantitative analyses and models are required to connect a plant's cellular organisation with its metabolism. However, quantitative data are often scattered over multiple studies, and finding such data and converting them into useful information is time-consuming. Consequently, there is a need to centralise the available data and to highlight the remaining knowledge gaps. Here, we present a step-by-step approach to manually extract quantitative data from various information sources, and to unify the data format. First, data from Arabidopsis leaf were collated, checked for consistency and correctness and curated by cross-checking sources. Second, quantitative data were combined by applying calculation rules. They were then integrated into a unique comprehensive, referenced, modifiable and reusable data compendium representing an Arabidopsis reference leaf. This atlas contains the metrics of the 15 cell types found in leaves at the cellular and subcellular levels.

Negative allometry of leaf xylem conduit diameter and double-wall thickness: implications for implosion safety.

Xylem conduits have lignified walls to resist crushing pressures. The thicker the double-wall (T) relative to its diameter (D), the greater the implosion safety. Having safer conduits may incur higher costs and reduced flow, while having less resistant xylem may lead to catastrophic collapse under drought. Although recent studies have shown that conduit implosion commonly occurs in leaves, little is known about how leaf xylem scales T vs D to trade off safety, flow efficiency, mechanical support, and cost. We measured T and D in > 7000 conduits of 122 species to investigate how T vs D scaling varies across clades, habitats, growth forms, leaf, and vein sizes. As conduits become wider, their double-cell walls become proportionally thinner, resulting in a negative allometry between T and D. That is, narrower conduits, which are usually subjected to more negative pressures, are proportionally safer than wider ones. Higher implosion safety (i.e. higher T/D ratios) was found in asterids, arid habitats, shrubs, small leaves, and minor veins. Despite the strong allometry, implosion safety does not clearly trade off with other measured leaf functions, suggesting that implosion safety at whole-leaf level cannot be easily predicted solely by individual conduits' anatomy.

Histological, chemical and gene expression differences between western redcedar seedlings resistant and susceptible to cedar leaf blight.

Introduction: Western redcedar (Thuja plicata) is an important species in the Cupressaceae both at economic and cultural levels in the Pacific Northwest of North America. In adult trees, the species produces one of the most weathering-resistant heartwoods among conifers, making it one of the preferred species for outdoor applications. However, young T. plicata plants are susceptible to infection with cedar leaf blight (Didymascella thujina), an important foliar pathogen that can be devastating in nurseries and small-spaced plantations. Despite that, variability in the resistance against D. thujina in T. plicata has been documented, and such variability can be used to breed T. plicata for resistance against the pathogen. Objective: This investigation aimed to discern the phenotypic and gene expression differences between resistant and susceptible T. plicata seedlings to shed light on the potential constitutive resistance mechanisms against cedar leaf blight in western redcedar. Methods: The study consisted of two parts. First, the histological differences between four resistant and four susceptible families that were never infected with the pathogen were investigated. And second, the differences between one resistant and one susceptible family that were infected and not infected with the pathogen were analyzed at the chemical (C, N, mineral nutrients, lignin, fiber, starch, and terpenes) and gene expression (RNA-Seq) levels. Results: The histological part showed that T. plicata seedlings resistant to D. thujina had constitutively thicker cuticles and lower stomatal densities than susceptible plants. The chemical analyses revealed that, regardless of their infection status, resistant plants had higher foliar concentrations of sabinene and α-thujene, and higher levels of expression of transcripts that code for leucine-rich repeat receptor-like protein kinases and for bark storage proteins. Conclusion: The data collected in this study shows that constitutive differences at the phenotypic (histological and chemical) and gene expression level exist between T. plicata seedlings susceptible and resistant to D. thujina. Such differences have potential use for marker-assisted selection and breeding for resistance against cedar leaf blight in western redcedar in the future.

Morphophysiological changes of Acca sellowiana (Myrtaceae: Myrtoideae) saplings under shade gradient / Alterações morfofisiológicas em mudas de Acca sellowiana (Myrtaceae: Myrtoideae) sob gradiente de sombreamento

Abstract Understanding morphological and physiological changes under different light conditions in native fruit species in juveniles' stage is important, as it indicate the appropriate environment to achieve vigorous saplings. We aimed to verify growth and morphophysiological changes under shade gradient in feijoa (Acca sellowiana (O. Berg) Burret) to achieve good quality saplings adequate to improve cultivation in orchards. The saplings were grown for twenty-one-month under four shading treatments (0%, 30%, 50%, and 80%). Growth, photosynthetic pigments, gas exchanges, chlorophyll fluorescence, and leaf anatomy parameters were evaluated. Saplings under full sun and 30% shade had higher height and diameter growth and dry mass accumulation due to higher photosynthesis rate. As main acclimatization mechanisms in feijoa saplings under 80% shade were developed larger leaf area, reduced leaf blade thickness, and enhanced quantum yield of photosystem II. Even so, the net CO2 assimilation and the electron transport rate was lower and, consequently, there was a restriction on the growth and dry mass in saplings under deep shade. Therefore, to obtain higher quality feijoa saplings, we recommend that it be carried out in full sun or up to 30% shade, to maximize the sapling vigor in nurseries and, later, this light environment can also be used in orchards for favor growth and fruit production.

Resumo A verificação de mudanças morfológicas e fisiológicas sob diferentes condições luminosas em espécies frutíferas nativas em estágio juvenil é importante, uma vez que indicam o ambiente adequado para a formação de mudas com alto vigor. Objetivou-se verificar o crescimento e as alterações morfofisiológicas sob gradiente de sombreamento em mudas de feijoa (Acca sellowiana (O. Berg) Burret) para obter mudas de boa qualidade, adequadas para fomentar os plantios da espécie em pomares. As mudas foram cultivadas por vinte e um meses sob quatro tratamentos de sombreamento (0%, 30%, 50% e 80%). Foram avaliados parâmetros de crescimento, pigmentos fotossintéticos, trocas gasosas, fluorescência da clorofila e anatomia foliar. Mudas a pleno sol e 30% de sombra apresentaram maior crescimento em altura, diâmetro e acúmulo de massa seca, devido à maior taxa de fotossíntese. Como principais mecanismos de aclimatação sob 80% de sombra, as mudas desenvolveram maior área foliar, redução da espessura do limbo foliar e aumento do rendimento quântico do fotossistema II. Mesmo assim, a assimilação líquida de CO2 e a taxa de transporte de elétrons foram menores e, consequentemente, houve restrição ao crescimento e acúmulo de massa seca das mudas no maior nível de sombreamento. Portanto, para a obtenção de mudas de feijoa de maior qualidade, recomendamos que seja realizada a pleno sol ou até 30% de sombra, para maximizar o vigor das mudas em viveiros e, posteriormente, este ambiente de luz também pode ser utilizado em pomares para favorecer o crescimento e a produção de frutos.

Morphophysiological changes of Acca sellowiana (Myrtaceae: Myrtoideae) saplings under shade gradient

Abstract Understanding morphological and physiological changes under different light conditions in native fruit species in juveniles stage is important, as it indicate the appropriate environment to achieve vigorous saplings. We aimed to verify growth and morphophysiological changes under shade gradient in feijoa (Acca sellowiana (O. Berg) Burret) to achieve good quality saplings adequate to improve cultivation in orchards. The saplings were grown for twenty-one-month under four shading treatments (0%, 30%, 50%, and 80%). Growth, photosynthetic pigments, gas exchanges, chlorophyll fluorescence, and leaf anatomy parameters were evaluated. Saplings under full sun and 30% shade had higher height and diameter growth and dry mass accumulation due to higher photosynthesis rate. As main acclimatization mechanisms in feijoa saplings under 80% shade were developed larger leaf area, reduced leaf blade thickness, and enhanced quantum yield of photosystem II. Even so, the net CO2 assimilation and the electron transport rate was lower and, consequently, there was a restriction on the growth and dry mass in saplings under deep shade. Therefore, to obtain higher quality feijoa saplings, we recommend that it be carried out in full sun or up to 30% shade, to maximize the sapling vigor in nurseries and, later, this light environment can also be used in orchards for favor growth and fruit production.

Resumo A verificação de mudanças morfológicas e fisiológicas sob diferentes condições luminosas em espécies frutíferas nativas em estágio juvenil é importante, uma vez que indicam o ambiente adequado para a formação de mudas com alto vigor. Objetivou-se verificar o crescimento e as alterações morfofisiológicas sob gradiente de sombreamento em mudas de feijoa (Acca sellowiana (O. Berg) Burret) para obter mudas de boa qualidade, adequadas para fomentar os plantios da espécie em pomares. As mudas foram cultivadas por vinte e um meses sob quatro tratamentos de sombreamento (0%, 30%, 50% e 80%). Foram avaliados parâmetros de crescimento, pigmentos fotossintéticos, trocas gasosas, fluorescência da clorofila e anatomia foliar. Mudas a pleno sol e 30% de sombra apresentaram maior crescimento em altura, diâmetro e acúmulo de massa seca, devido à maior taxa de fotossíntese. Como principais mecanismos de aclimatação sob 80% de sombra, as mudas desenvolveram maior área foliar, redução da espessura do limbo foliar e aumento do rendimento quântico do fotossistema II. Mesmo assim, a assimilação líquida de CO2 e a taxa de transporte de elétrons foram menores e, consequentemente, houve restrição ao crescimento e acúmulo de massa seca das mudas no maior nível de sombreamento. Portanto, para a obtenção de mudas de feijoa de maior qualidade, recomendamos que seja realizada a pleno sol ou até 30% de sombra, para maximizar o vigor das mudas em viveiros e, posteriormente, este ambiente de luz também pode ser utilizado em pomares para favorecer o crescimento e a produção de frutos.

LEAF ANATOMY CHARACTERIZATION OF FOUR Apochloa SPECIES: A C3 GENUS RELATED TO EVOLUTION OF C4 PATHWAY IN GRASSES / Caracterización anatómica de hojas de cuatro especies de Apochloa: un género relacionado con la evolución de la vía C4 en gramíneas

ABSTRACT Leaf anatomy characteristics provide important evidences about the transition between C3 and C4 pathways. The C4 photosynthesis pathway allowed to reduce the C3 photorespiratory rate, concentrating CO2 around the Rubisco site and using structures and machinery already presented in C3 plants. In monocots, it is observed a high number of C4 lineages, most of them phylogenetically related to C3 groups. The genus Apochloa (C3), subtribe Arthropogoninae, is related to two C4 genera Coleataenia and Cyphonanthus. The aim of this study was to evaluate four Apochloa species in order to establish anatomical characteristics related to the evolution of C4 pathway in this group. By means of transverse sections fully expanded leaves of A. euprepes, A. lorea, A. molinioides, and A. poliophylla were collected and the characteristics of the mesophyll (M) and bundle sheath (BS) cells were determined. These species showed a rustic Kranz anatomy with enlarged and radial arranged BS cells, which have few organelles organized in a centrifugal position. Although the modifications of BS cells are probably related to the maintenance of plant water status, we also discuss the evolution for the establishment of C4 photosynthesis in the related C4 genera.

RESUMEN Las características de la anatomía de la hoja proporcionan evidencias importantes sobre la transición entre las vías C3 y C4. La fotosíntesis C4 surgió para reducir la tasa de fotorrespiración C3, concentrando el CO2 alrededor del sitio de la Rubisco y utilizando estructuras y maquinaria ya presentes en las plantas C3. En monocotiledóneas, se observa un alto número de linajes C4, la mayoría de ellas filogenéticamente relacionadas con grupos C3. El género C3 Apochloa, que pertenece a la subtribu Arthropogoninae, está relacionado con dos géneros C4 Coleataenia and Cyphonanthus. En este contexto, el objetivo fue evaluar cuatro especies de Apochloa para establecer las características anatómicas relacionadas con la evolución de la via C4 en este grupo. Se colectaron hojas completamente expandidas de A. euprepes, A. lorea, A. molinioides y A. poliophylla y se determinaron las características de las células del mesófilo (M) y del haz de la vaina (HV) a partir de secciones transversales de la hoja. Las especies presentaron una anatomía rústica de Kranz con células HV agrandadas y de distribución radial, con pocas organelas organizadas en posición centrífuga. Aunque las modificaciones de las células HV están probablemente relacionadas con el mantenimiento del estado hídrico de la planta, se puede inferir que facilitan el establecimiento de la fotosíntesis en los géneros C4 relacionados.

Structural Characterisation of the Leaf of Bauhinia monandra Kurz (Fabaceae - Cercidoideae)

Abstract Bauhinia monandra Kurz (Fabaceae) is an ornamental leguminous tree from Africa. Its leaf has been proven to be hypoglycaemic, and are a source of lecithin BmoLL, providing this species with great medicinal potential. Curiously, there are no reports of the anatomical description of the leaf of this species. The present work aimed at describing the leaf anatomy of B. monandra, and make histochemical inferences. To this end, anatomical procedures in light and scanning electron microscopy were performed from different parts of the leaves of plants growing in the state of Bahia, Brazil. The leaf is amphistomatous. It possesses papillate epidermis, nonglandular and navicular trichomes, and the mesophyll is dorsiventral. The central vein is distinct from the others of the first degree. The first, second, and third-degree veins possess thick fibre bundles with associated monocrystals. The other veins are a little fibrous and excessively reduced. The petiole vascularisation consists of circularly arranged collateral bundles, plus two accessory bundles. The pulvinus have a wide parenchymatic cortex with abundant druses and vascularisation restricted to the central region, surrounded by a crystalline sheath and by a starch sheath. The motile cushion has the vascular bundles arranged in series. Associated with the phloem from the pulvinus vascular bundles and the motile apparatus, occur non-lignified septate fibres that confer flexibility to these organs. The absence of lateral projections and the arrangement of vascular bundles in the petiole was the most distinctive anatomical features and of the greatest taxonomic potential observed in the leaf of B. monandra.

Leaf morphoanatomy of an endemic massaranduba from Chapada Diamantina, Bahia, Brazil / Morfoanatomia foliar de uma massaranduba endêmica da Chapada Diamantina, Bahia, Brasil

Abstract: The Sapotaceae family is recognized for its economic importance, presenting food, medicinal and timber potential. Pouteria andarahiensis T.D.Penn., popularly known as "massaranduba", is endemic to Chapada Diamantina, Bahia, Brazil, and is currently classified on the IUCN red list as "endangered". Pouteria andarahiensis is little studied, highlighting this work as the first anatomical study for the species. Light microscopy and scanning electron microscopy techniques were used to perform anatomical studies. The species showed characters shared with the family (laticifers and malpiguiaceous trichomes), as well as diagnostic characters and associated with xeromorphy. The data obtained from the leaf architecture can assist in the identification of the species in a vegetative state, while the leaf surface provided unpublished data to the species, indicating the presence of a cuticle with complex ornamentation. Stand out as xeromorphic anatomical features, high stomatal density, high number of trichomes per area, sclerenchymatic columns in the mesophyll and a subepidermal sclerenchyma layer connecting the vascular bundles in the mesophyll.

Resumo: A família Sapotaceae é reconhecida pela sua importância econômica, apresentando potencial alimentício, medicinal e madeireiro. A espécie Pouteria andarahiensis T.D.Penn., conhecida popularmente como "massaranduba", é endêmica da Chapada Diamantina, Bahia, Brasil, e atualmente encontra-se classificada na lista vermelha da IUCN como "em perigo". Pouteria andarahiensis é pouco estudada, destacando este trabalho como o primeiro estudo anatômico para a espécie. Foram empregadas técnicas de microscopia de luz e de microscopia eletrônica de varredura para a realização dos estudos anatômicos. A espécie apresentou caracteres compartilhados com a família (laticíferos e tricomas malpiguiáceos), assim como, caracteres diagnósticos e associados a xeromorfia. Os dados obtidos da arquitetura foliar podem auxiliar na identificação da espécie em estado vegetativo, enquanto a superfície foliar forneceu dados inéditos a espécie, indicando a presença de uma cutícula com ornamentação complexa. Destacam-se como características anatômicas xeromórficas, alta densidade estomática, alto número de tricomas por área, colunas esclerenquimáticas no mesofilo e uma camada subepidérmica de esclerênquima conectando os feixes vasculares no mesofilo.

A new synonym for Micropholis gardneriana (Sapotaceae) with complete description, anatomy and distribution notes / Um novo sinônimo para Micropholis gardneriana (Sapotaceae) com descrição completa, anatomia e notas de distribuição

Abstract: In the present work, we synonymize Micropholis compta under M. gardneriana due to the overlap of morphoanatomical characters and the absence of distinctive attributes, verified during taxonomic and anatomical study of the genus Micropholis for Brazil. This study provides an updated description of M. gardneriana, including macro- and micro-morphological data, a distribution map, and comments on conservation status, ecological and taxonomy.

Resumo: No presente trabalho, sinonimizamos Micropholis compta sob M. gardneriana devido à sobreposição de caracteres morfoanatômicos e ausência de atributos distintivos, verificado durante estudo taxonômico e anatômico do gênero Micropholis para o Brasil. Este estudo fornece uma descrição atualizada de M. gardneriana, incluindo dados macro e micromorfológicos, um mapa de distribuição e comentários sobre status de conservação, ecologia e taxonomia.

Effect of stress on the leaf anatomy of sugarcane cultivars with different drought tolerance(Saccharum officinarum, Poaceae) / Efecto del estrés sobre la anatomía foliar de cultivares de caña de azúcar con diferente tolerancia a la sequía (Saccharum officinarum, Poaceae)

Introduction: Drought is an important stress factor for sugarcane production in many areas of the world. Water proportion and moisture indices are applicable information for agronomic planning to forecast water excess or deficit during the crop cycle. Objective: Leaf anatomical features of two different sugarcane Saccharum 'UT12' (drought susceptible cultivar) and Saccharum 'UT13' (drought tolerant cultivar) were compared under early drought stress situation between 30 and 90 days after planting. Methods: Forty leaf anatomical features were investigated using peeling and free hand sectioning technique. Results: Some anatomical characteristics showed response to drought stress. Saccharum 'UT12' demonstrated higher sensitivity toward anatomical characteristics than Saccharum 'UT13'. A total of 23 and 15 out of the 40 anatomical characteristics showed significance in Saccharum 'UT12' and Saccharum 'UT13', respectively. Some anatomical features such as cell wall and cuticle thickness, vascular bundle size, stomatal size and density can be used as important markers for drought stress assessment in sugarcane leaf. Conclusions: This is the first report describing comparative leaf anatomy of sugarcane Saccharum 'UT12' and Saccharum 'UT13' in Thailand under drought stress. Results will provide important information to improve adaptation mechanisms of tolerant sugarcane cultivars under initial drought stress situations.

Introducción: La sequía es un factor de estrés importante para la producción de caña de azúcar en muchas áreas del mundo. La proporción de agua y los índices de humedad son información aplicable en la planificación agronómica para pronosticar el exceso o el déficit de agua durante el ciclo del cultivo. Objetivo: Se compararon las características anatómicas de las hojas de dos cañas de azúcar diferentes Saccharum 'UT12' (cultivar susceptible a la sequía) y Saccharum 'UT13' (cultivar tolerante a la sequía) bajo una situación de estrés por sequía temprana entre 30 y 90 días después de la siembra. Métodos: Se investigaron las características anatómicas de cuarenta hojas utilizando la técnica de seccionamiento de pelado y manos libres. Resultados: Algunas características anatómicas mostraron respuesta a estrés por sequía. Saccharum "UT12" demostró una mayor sensibilidad hacia las características anatómicas que Saccharum 'UT13'. Un total de 23 y 15 de las 40 características anatómicas mostraron significancia en Saccharum 'UT12' y Saccharum 'UT13', respectivamente. Algunas características anatómicas como la pared celular y el grosor de la cutícula, el tamaño del haz vascular, el tamaño y la densidad de los estomas se pueden utilizar como marcadores importantes para evaluar el estrés por sequía en la hoja de caña de azúcar. Conclusiones: Este es el primer reporte que describe la anatomía comparada de la hoja de la caña de azúcar Saccharum 'UT12' y Saccharum 'UT13' en Tailandia bajo estrés por sequía. Los resultados proporcionarán información importante para mejorar los mecanismos de adaptación de cultivares tolerantes de caña de azúcar bajo situaciones iniciales de estrés por sequía.

Foliar anatomy of Rhynchosia spp. (Leguminosae, Papilionoideae) from Roraima state, northern Brazilian Amazon / Anatomia foliar de Rhynchosia spp. (Leguminosae, Papilionoideae) de Roraima, Amazônia setentrional

Comparative studies on the structure of foliar anatomy in four species of Rhynchosia from Roraima state (northern Brazilian Amazon) were carried out to identify additional morphological characters to support the definition of the systematic boundaries among the species. Fully expanded leaves, including the petioles, were collected from the upper nodes of a plant's stem. Anatomical characters were observed in cross-sections of the middle portion of leaflets and petiole segments. Presence and distribution of glandular trichomes, continuity of sclerenchyma around the vascular bundles in leaflet blades and the conformation of the area between the two ridges of petioles were important characters to distinguish among the species of Rhynchosia. For the first time we report a distinct multicellular gland-like structure which we found in the petioles of three species. (AU)

Estudos comparativos da estrutura anatômica foliar foram realizados para identificar caracteres morfológicos adicionais para a caracterização sistemática de quatro espécies de Rhynchosia ocorrentes em Roraima. Folhas completamente expandidas, incluindo o pecíolo, foram coletadas nos nós superiores da planta. Os caracteres anatômicos foram estudados a partir de observações de cortes tranversais da região mediana de folíolos e pecíolos. A presença e a distribuição de tricomas glandulares, a continuidade do esclerênquima em torno dos feixes vasculares nos folíolos e a conformação da região entre as duas alas nos pecíolos se mostraram importantes caracteres para a distinção das espécies amazônicas de Rhynchosia. Também foi registrada pela primeira vez a ocorrência de uma diferenciada estrutura similar a glândula nos pecíolos de três espécies.(AU)

Leaf Morphoanatomy of Diploon Cronquist (Sapotaceae Juss.) / Morfoanatomia Foliar de Diploon Cronquist (Sapotaceae Juss.)

Abstract: Diploon is a monospecific genus represented by Diploon cuspidatum, an arboreal species that has morphological characteristics distinct from those of other Sapotaceae species. In this study, Diploon cuspidatum leaves were characterized morphoanatomically in order to reveal additional diagnostic characters of their external morphology of the genus. The Diploon petiole presents shape and arrangement of the vascular system flat-convex, occasionally with one or two accessory bundles, many laticifers, and many prismatic crystals. The midrib is biconvex with a U-shaped cuticle on the abaxial side, and laticifers are associated with the vascular tissues. Mesophyll is dorsiventral, palisade parenchyma has two cell layers, T- and Y-shaped malpighiaceous trichomes are on the abaxial epidermis with a small stalk cell and long arm. The venation pattern is brochidodromous. Intersecondary veins run parallel to the secondary veins, and quaternary veins branch freely. Higher order veins are not present. Morphoanatomical analysis revealed important characteristics that reveal a set of structures common to Sapotaceae, in addition to characters that are important for the recognition and identification of D. cuspidatum.

Resumo: Diploon é um gênero monoespecífico representado por Diploon cuspidatum, espécie arbórea com características morfológicas peculiares em relação a outros gêneros de Sapotaceae. A espécie teve suas folhas caracterizadas morfoanatomicamente, a fim de fornecer caracteres diagnósticos adicionais à morfologia externa, subsidiar pesquisas no âmbito da anatomia vegetal, dendrologia e filogenia. D. cuspidatum evidenciou pecíolo plano-convexo, com feixe vascular plano-convexo, presença ocasional de até dois feixes acessórios, presença de muitos laticíferos e cristais prismáticos. A nervura central é biconvexa, com cutícula em forma de U no lado abaxial, laticíferos associados aos elementos vasculares. Mesofilo dorsiventral, parênquima paliçádico com duas camadas descontínuas, tricomas malpighiáceos do tipo T e Y na epiderme abaxial com pedúnculo pequeno e braço longo. O padrão de venação é do tipo broquidódroma. Veias intersecundárias paralelas as veias secundárias, veias quaternárias em ramos livres. Ausência de veias de ordem superior. A análise morfoanatômica realizada evidenciou caracteres importantes que retratam um conjunto de estruturas comuns a Sapotaceae e também importantes para reconhecimento e identificação D. cuspidatum.

Use of Frozen Leaves for Morpho-anatomical Characterization of Nectandra megapotamica (Spreng) Mez, Lauraceae

Abstract Nectandra megapotamica (Spreng.) Mez. it is a native tree species of the Atlantic Forest, commonly known as canela-preta. The species has some anti-inflammatory, antitumor and antirheumatic properties among others. In this work the use of frozen plant material for microscopy analysis was tested. In addition, the leaf morpho-anatomy of the species was characterized which allowed to perform a structural description and to identify structures of secretion and storage of essential oil. The plant material was prepared for analyzes in optical, fluorescence and scanning electron microscopy. The leaf anatomy shows glabrous epidermis, unistratified, paracytic stomata, absence of trichomes, polyhedral epidermal cells. Some typical family characteristics were observed as a closed arc-shaped bicollateral bundle vascular system and dorsiventral mesophyll. The structures of secretion and storage of essential oil were identified as secretory cavities.

Forage potential of Urochloa genotypes by using leaf anatomy / Avaliação do potencial forrageiro de genótipos de Urochloa por meio da anatomia foliar

ABSTRACT: The digestibility potential of leaves from forages depends on the amount of nutrition in their tissues, with low lignin deposition in the cell wall, mainly parenchyma and phloem. This research evaluated the leaf structure of different Urochloa genotypes and discussed its potential for evaluating digestibility. The cultivars U. brizantha, U. decumbens, U. ruziziensis and three clones of U. ruziziensis (1, 95 and 97), which are under development in breeding programs, were evaluated. Plants were grown under the recommended culture conditions for the Urochloa species. Plants were cut 60 days after sowing, and leaves were collected at 15 days of regrowth. Leaves were fixed in FAA 70 and further stored in 70% ethanol until being submitted to the usual microtechniques for the preparation of microscopy slides. The area of the tissues from the interveinal and midrib regions was measured using ImageJ software, and their proportions were calculated. In the interveinal region, the proportion of chlorophyll parenchyma was greater for U. decumbens and the Clone 1 genotypes. Urochloa brizantha and clones 95 and 97 showed a higher proportion of the vascular bundle compared to U. ruziziensis, U. decumbens and Clone 1. The proportion of the ground parenchyma in the midrib was greater in U. brizantha, Clone 95 and Clone 97. Thus, it can be concluded that the Clone 1 genotypes (from U. ruziziensis) showed leaf tissues (parenchyma and phloem) with higher digestibility potential; in addition, U. brizantha and U. decumbens showed a high percentage of xylem and sclerenchyma, which reduces their quality as forage.

RESUMO: O potencial de digestibilidade das folhas de forrageiras depende da quantidade de seus tecidos com baixa deposição de lignina nas paredes celulares, principalmente o parênquima e floema. O presente trabalho objetivou avaliar a estrutura foliar de diferentes genótipos de Urochloa e seu potencial de digestibilidade foliar. Foram avaliadas as cultivares U. brizantha, U. decumbens, U. ruziziensis e três clones de U. ruziziensis (1, 95 e 97). As plantas foram cultivadas em campo com condições de manejo recomendadas para a espécie, sendo cortadas aos 60 dias e as folhas coletadas aos 15 dias de rebrota. As folhas foram fixadas em FAA 70, armazenadas em etanol 70% e posteriormente submetidas à microtécnica usual para preparação de lâminas semipermanentes. Foram analisadas as regiões internervural e da nervura mediana com o auxílio do software Image J sendo mensurada a área de cada tecido da folha e depois calculada a sua proporção em relação à área total das secções. Na região internervural, a proporção de parênquima foi maior em U. decumbens e no Clone 1. Ainda nesta região, Urochloa brizantha e os Clones 95 e 97 apresentaram maiores médias para a proporção de feixes vasculares. Na nervura mediana, a proporção do parênquima foi maior em U. brizantha, Clone 95 e Clone 97. De maneira geral, o Clone 1 (proveniente de U. ruziziensis) apresentou parênquima e floema em maiores proporções, enquanto genótipos de U. brizantha e U. decumbens demonstram altas quantidades de xilema e esclerênquima que reduzem o seu potencial de digestibilidade.