Investigation of mercury contamination in lipstick sold in the Saudi market and the potential health risk.

Background: Environmental contamination is a significant global health issue, with cosmetics and pharmaceuticals being major polluters. High concentrations of heavy metals, such as Hg, have been found to have toxic effects and may pose a threat to human health. This study aimed to determine the concentration of mercury (Hg) in lipsticks available in the Saudi Arabia market.Methods: In this study, 12 lipstick samples from three colors were analyzed using inductively coupled plasma optical emission spectrometry (ICP-OES) to measure the content of Hg.Results: The concentration range of Hg was 0.004-0.296 ppm. Moreover, the systemic exposure dosage of mercury in the lipstick samples examined in this study ranged from 5.01 × 10-8 to 1.43 × 10-6 µg/kg bw/day, while the range of the margin of safety was from 7.3 × 109 to 2.2 × 108.Discussion: The Hg concentration in all analyzed samples was less than 0.50 and 1 ppm, which indicated that the Hg level was within acceptable limits according to Saudi Standards, Metrology and Quality Organisation (SASO) and the United States Food and Drug Administration (US FDA), respectively. On the other hand, the calculated margin of safety values for mercury exceeded the safe standard established by the WHO. The results derived from using hazard quotient (HQ) indices depict the potential carcinogenic health risk posed to consumers who employ red-colored lipsticks.

Right prefrontal activation associated with deviations from expected lipstick texture assessed with functional near-infrared spectroscopy.

Introduction: There is a continuous consumer demand for ever superior cosmetic products. In marketing, various forms of sensory evaluation are used to measure the consumer experience and provide data with which to improve cosmetics. Nonetheless, potential downsides of existing approaches have led to the exploration of the use of neuroimaging methods, such as functional near-infrared spectroscopy (fNIRS), to provide addition information about consumers' experiences with cosmetics. The aim of the present study was to investigate the feasibility of a real-time brain-based product evaluation method which detects the incongruency between a product, in this case lipstick, and a consumer's expectations. Method: Thirty healthy, female, habitual lipstick users were asked to apply six different lipsticks varying in softness and to rate the softness of and their willingness to pay (WTP) for each lipstick. Cerebral hemodynamic responses in frontal areas were measured with fNIRS during lipstick application and analyzed using the general linear model (GLM). Incongruency scores between softness and expectation were calculated in order to understand how far removed each lipstick was from a participant's optimal softness preference. The correlation between brain activation (beta scores) during the application of each lipstick and the respective incongruency scores from each participant were acquired using semi-partial correlation analysis, controlling for the effects of WTP. Results: We revealed a significant intra-subject correlation between incongruency scores and activation in the right inferior frontal gyrus (IFG). This confirms that as the texture incongruency scores increased for the lipstick samples, activation in each individual's right IFG also increased. Conclusion: The correlation observed between incongruency perceived by participants and activation of the right IFG not only suggests that the right IFG may play an important role in detecting incongruity when there is a discrepancy between the perceived texture and the consumer's expectations but also that measuring activity in the IFG may provide a new objective measurement of the consumer experience, thus contributing to the development of superior cosmetics.

Clinical characteristics of Martorell hypertensive ischaemic leg ulcer.

OBJECTIVE: We sought to characterise the clinical picture of Martorell hypertensive ischaemic leg ulcer (HYTILU) by describing the ulcer borders with three clinical features: 'the red lipstick sign'; purple border; and livedo racemosa. We also aimed to characterise comorbidities and determinants of healing time. METHOD: A single-centre, retrospective cohort study was conducted between 2015-2020. We scrutinised ulcer photographs for relevant clinical signs. Data on comorbidities, medication and ulcer treatments, as well as method of diagnosis and healing time, were collected from patients' electronic medical records. RESULTS: In total, 38 female patients and 31 male patients (mean age 73 years) were assessed, with a mean follow-up time of 174 days. The 'red lipstick-like' margin covered 0-50% of the ulcer margin in 56.5% of the ulcers, and 51-100% of the ulcer margin in 43.5% of the ulcers. Purple border or livedo racemosa was observed in 70.5% of the ulcers. All patients had hypertension and 52.2% of patients had type 2 diabetes. A heavy cardiovascular disease burden and frequent concomitant vascular pathologies were found. Infections requiring systemic antibiotics, ulcer size and duration of symptoms before diagnosis were strongly associated with healing time. We also found that use of systemic corticosteroids and severity of hypertension (measured by the number of antihypertensive medications used) delayed healing. CONCLUSION: Our data suggest that 'the red lipstick sign' could be a novel diagnostic feature in HYTILUs alongside purple border, livedo racemosa and necrotic/fibrinous ulcer bed. The results also elucidated HYTILU comorbidities, and showed that infections and delay in diagnosis impeded healing.

Assessment of color preference, purchase intention and sexual attractiveness of lipstick colors under multiple lighting conditions.

Lipstick is one of the most commonly used cosmetics, which is closely associated with female attractiveness and influences people's perception and behavior. This study aimed to investigate the impact of light sources, lipstick colors, as well as gender on the subjective assessment of lipstick color products from the prospective of color preference, purchase intention and sexual attractiveness. The correlation between color preference evaluations when applying lipstick on lips and on forearms was also explored. Sixty participants completed their visual assessment of 15 lipsticks worn by 3 models under 5 light sources, with uniformly sampled correlated color temperature (CCT) values ranging from 2,500 K to 6,500 K. The results indicated that the light source significantly influenced color preference and purchase intention, while lipstick color significantly impacted on sexual attractiveness. The interactions between gender and other factors were also observed and are discussed. Compared to men, women were found to be more sensitive to different light sources and hold different attitudes toward different lipstick colors under different CCTs. Interestingly, no significant correlation was found between lipstick color preference ratings on the lips and forearm, which conflicted with the commonly recognized way of lipstick color selection. These findings should contribute to a deeper understanding of the consumer attitude toward lipstick colors and provide a useful reference for lighting design in situations where cosmetics are specified, manufactured, retailed and generally used, both professionally and in the home.

Toxic element determination in selected cosmetic products: health risk assessment.

The aim of this research was to determine the content of arsenic (As), cadmium (Cd), lead (Pb), and nickel (Ni) in selected lipsticks and face foundations of different price categories and the health risk assessment associated with these toxic elements via dermal and oral exposure. The samples (10 lipstick and 10 face foundations) were purchased from local markets in Belgrade, Serbia. The samples were prepared by acid digestion and analyzed by atomic absorption spectrometry (flame atomization for Cd, Pb, and Ni and electrothermal atomization for As). Arsenic was found in 50% of lipstick samples and in only two face foundation samples with the highest concentration of 0.28 mg/kg in the lipstick sample. Lead concentration was in the range of 1.15 to 5.12 mg/kg in ten samples. Nickel was found in five samples out of 20, with the highest concentration of 4.20 mg/kg. Cadmium was found in only one face foundation sample in the cheaper price range (1.11 mg/kg). The obtained results indicate that concentrations of As, Pb, Cd, and Ni were within the permissible limits according to Serbian legislation. Health risk associated with these elements was assessed as non-carcinogenic and carcinogenic risk. Obtained hazard quotients (HQs) and hazard indexes (HIs) were below 1, indicating the absence of significant non-carcinogenic health risk due to exposure to these toxic elements (TEs). The carcinogenic risk results show that investigated cosmetic products can be considered low-risky due to the possibility of causing malignant disease.

Lipstick influence on teeth color appearance.

Background and aim: A beautiful smile with white and shiny teeth is nowadays a must, according to aesthetics norms. The color of the lips, with or without lipstick, may influence the appearance of the teeth color. The objective of the study was to evaluate the influence of the lipstick on the tooth color appearance. Methods: Four female patient smiles were photographed from the frontal view with five different colored lipsticks. Each photo was evaluated by 100 observers and noted from 1-dark to 6-white. Data were statistically analyzed with dedicated software. Results: The majority of the observers noted with lower grades the nude lipstick color photos and with higher grades the red and purple ones. Conclusion: Within the limitation of the study, the surrounding (the lipstick) has an important influence on the appearance of the tooth color.

Rapid and nondestructive analysis of lipstick on different substrates using ATR-FTIR spectroscopy and chemometrics.

Lipstick can be an important piece of evidence in crimes like murders, rapes, and suicides. Due to its prevalence, it can be an important corroborative evidence in crime reconstruction. The analysis of such evidence can provide an evidentiary link between the suspect, the victim, object, or the crime scene. We report the use of nondestructive ATR-FTIR spectroscopy combined with chemometrics for the classification of 10 brands of lipsticks with nine samples each. Chemometric method of partial least square-discriminant analysis (PLS-DA) has been employed to interpret the data and classify the samples into their respective classes. The PLS-DA model provides an AUC figure above 0.99 in all brands except one; for which it is slightly less at 0.94. We have also tested the traces of these lipstick samples on different substrates treating them as unknowns in the already trained PLS-DA model. 100% of the samples on nine substrates viz. a cotton, nylon, plastic, dry tissue, denim (blue jeans), wet tissue, nitrile gloves, white paper, and polyester were correctly attributed to their source brand. In conclusion, the results suggest that ATR-FTIR combined with the chemometrics is a rapid, nondestructive, and accurate method for the discrimination and source attribution of lipstick. This study has potential for use in actual forensic casework conditions.

An up-conversion test paper based on "switch-off" of fluorescence is constructed to sensitively and selectively detect cancer-causing dye Sudan III in lipstick.

Cancer-causing dye Sudan III is banned adding to cosmetics, so a method for detecting trace Sudan III in cosmetics is established. A single dispersed up-conversion molecularly imprinted fluorescent nanoprobe is constructed and coated on the filter paper. The mechanism for detecting Sudan III by this composite fluorescent nanoprobes-paper is systematically analyzed. The fluorescent response (max emission peak is at 541 nm) is linearly related to 10-1000 nM Sudan III, and Sudan III can be selectively recognized (imprinting factor increased to 4.1). The limit of detection and quantitation are further reduced to 2.89 nM and 9.63 nM, respectively. The recoveries of Sudan III in lipstick samples are between 93.18 and 108.3%, and relative standard deviation is less than or equal to 4.6%. Trace Sudan III in cosmetics are detected accurately and sensitively by this method due to up-conversion nanoparticles with little interference of background fluorescence and molecularly imprinted polymers with selective enrichment.

Lip print enhancement: review.

Lip print (LP) evidence can be an essential tool for human forensics. LPs have conventionally been developed using substances such as lysochrome dyes, fluorescent dyes, indigo dye, aluminium powder, and silver metallic powder. However, techniques for LP enhancement from various substrates are currently inconsistent and lack standardisation in practice. This review summarises current knowledge on the physical and chemical techniques of LP enhancement, identifies limitations, and provides suggestions for future research on practical applications of cheiloscopy as a forensic tool in criminal justice.Key pointsThe grooves and wrinkles of the human lip establish unique patterns that persist throughout life.Cheiloscopic patterns exhibit discriminatory individual characteristics that may constitute circumstantial forensic evidence.Enhancement techniques for latent lip prints on porous and nonporous substrates can be classified as physical or chemical.Unlike fingerprint, there is a current lack of consistency and/or standardisation on latent lip print enhancement methods in frontline forensic practice.

Unlocking the Hidden Potential of Cosmetics Waste for Building Sustainable Green Pavements in the Future: A Case Study of Discarded Lipsticks.

This investigation is dedicated to unlocking the hidden potential of discarded cosmetics towards building green sustainable road pavements in the future. It is particularly aiming at exploring waste lipstick (WLS) as a high-quality functional additive for advanced asphalt mix technologies. To fuel this novel innovation, the effect of various WLS doses (e.g., 5, 10, and 15 wt.%) on the performance of base AP-5 asphalt cement was studied in detail. A wide array of cutting-edge analytical lab techniques was employed to inspect in-depth the physicochemical, microstructural, thermo-morphological, and rheological properties of resultant admixtures including: elemental analysis, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thin-layer chromatography-flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), needle penetration, ring and ball softening point, Brookfield viscometer, ductility, and dynamic shear rheometer (DSR) tests. Unlike the unstable response of asphaltenes, the additive/artificial aging treatments increased the fraction of resins the most, and decreased that of aromatics; however, asphaltenes did not impair the saturates portion, according to Iatroscan research. FT-IR scan divulged that the WLS-asphalt interaction was physical rather than chemical. XRD diagnosis not only revealed an obvious correlation between the asphaltenes content and the fresh-binder crystallinity but also revealed the presence of fillers in the WLS, which may generate outstanding technical qualities to bituminous mixes. According to AFM/SEM analyses, the stepwise incorporation of WLS grew the magnitude of the "bee-shaped" microstructures and extended the roughness rate of unaged/aged binders. The prolonged consumption of the high thermal-stable additive caused a remarkable drop in the onset degradation and glass transition temperature of mixtures, thus enhancing their workability and low-temperature performance, according to TGA/DTGA/DSC data. The DSR and empirical rheological experiments demonstrated that the WLS could effectively lower the manufacturing and compaction temperatures of asphalt mixes and impart them with valuable anti-aging/fatigue-cracking assets. In a nutshell, the use of waste lipstick as an asphalt modifier is viable and cost-effective and could attenuate the pollution arisen from the beauty sector, while improving the performance of hot/warm asphalt mixes (HAM/WAM) and extending the service life of roadways.

From Chinese tourists to Taiwanese campers: Impacts of tourism policies on campsite land use/cover change.

The rapid increase in camping activities and campsites has had negative environmental impacts in mountainous areas. Tourism policies may be an important factor in changing recreational behavior and increasing campsites. The purpose of this study was to explore the effects of tourism policies on campsite-related landscape changes in Taiwan. The study area consisted of 276 campsites in the Jianshi and Wufeng Townships in Hsinchu County. The tourism policy periods were divided into 2001-2007 (Taiwan's agri-tourism policy), 2008-2015 (China and Taiwan's travel permit policy), and 2016-2019 (China's travel restriction policy), based on a reference review and relative theories. The 2000, 2008, 2016, and 2019 campsite landscapes were classified into forestland and non-forestland through object-based classification. This study established a general linear model to analyze the effect of tourism policy period on campsite forestland and non-forestland landscape change, according to the 50, 100, 250, 500, and 1000 m radii of 276 campsites. The results showed that tourism policies had a significant effect on campsite forestland and non-forestland landscape changes. The effect sizes ranged from medium to large. The Chinese tourist travel permit policy was significantly associated with increased non-forestland in campsites from 2008 to 2016. This policy likely affected recreational behavior indirectly, promoting camping and increasing non-forestland through the crowding-out effects of the many Chinese tourists, which was not the original purpose of the policy. Tourism policy decision-makers should consider the potential negative landscape change effects of changes in recreational behavior, and provide supporting measures to maintain recreational quality and avoid crowding-out effects. Campsite development should also be regulated to prevent forestland changes and achieve sustainable management.

A multitechnique approach for discrimination and identification of lipsticks for forensic purposes.

Cosmetics are becoming more and more popular; consequently, the chance of finding them as microtraces at a crime scene increases. They are easily transferable and can provide a link between a suspect and a victim. For this reason, identifying and comparative analysis of red lipstick - the most popular and used - is required. The aim of this study was to apply a multitechnique methodology for the comparative forensic analysis of the red lipsticks traces of a very similar hue. For this purpose, four methods of different physicochemical basics - two nondestructive spectroscopic and two destructive separation techniques - were used. The possibilities and advantages of attenuated total reflection infrared spectroscopy (ATR-FTIR), confocal Raman microscopy (CRM), capillary electrophoresis (MEKC) and gas chromatography-mass spectrometry (GC-MS) have been combined. Specially prepared lipstick traces in various forms (imprints, smears) on different surfaces (absorbent and nonabsorbent) were analyzed to confirm the usefulness of the proposed methods. The premise is that if two methods yield a consistent result, the investigation is terminated at this stage. All investigated traces were properly identified. First, the ATR-FTIR method as a nondestructive technique is recommended. Sometimes, due to strong interferences from the substrates, the newly proposed method with the use of confocal Raman microscopy may be an alternative. The next recommendation is the MEKC method. Only in case of the absence of unambiguous conclusions, it is proposed to use the GC-MS method. This methodology has the potential to be applied in the comparative analysis of red lipsticks for forensic purposes.

Realization of Low-wax Lipstick by Rubber Molding Technology.

Reducing the quantity of wax in lipstick can improve the properties of the lipstick, including the glossiness, moisturizing capability, and longevity. However, lipsticks with less wax tend to break more easily. Therefore, to prevent breakage while reducing the wax content, we focused on the crystal structure of the wax gel and strain generated during the cooling and solidification processes as they are structural factors that affect fragility. Generally, if the crystals and strain are small, the structure is less easily broken. However, because the tip of the lipstick cools more rapidly from below than the root, the strain of the root against the tip increases owing to poor heat transmission. This creates large shrink holes in the root. While reheating from above can suppress the generation of shrink holes, it also causes the crystals to grow larger and the structure to become weak owing to slow cooling. Therefore, we adopted a rubber-molding technology generally used to form logos and complicated shapes as a strategy to mitigate these issues. This successfully reduced the strain generated inside the lipstick during the cooling process, as the rubber mold shrunk along with the lipstick, making it possible to quench the root. Therefore, we were able to realize a small crystal structure and low strain on the root of the lipstick. Our results demonstrate that it is possible to realize a lipstick with excellent features by reducing the quantity of wax.

Never retire: An introduction to the Baumeister- Humphreys-Spence--Urban birthday issue.

The professional and private lives of Wolfgang Baumeister, Sir Colin Humphreys, John C.H. Spence and Knut Urban are retraced on the occasion of their 80th (Humphreys, Urban) and 75th (Baumeister, Spence) birthdays.

Meadowfoam seed oil as a natural dispersing agent for colorants in lipstick.

OBJECTIVE: Green and sustainable trends are growing and with that the demand for naturally derived ingredients is rising. Dispersing agents are essential components of lipsticks due to their ability to wet pigment particles, reduce agglomerates and prevent re-agglomeration by stabilizing pigment particles. In this study, meadowfoam seed oil was evaluated as a pigment-dispersing agent for lipsticks and compared with castor oil and octyldodecanol. METHODS: Dispersions of Red 7 Lake were formulated with 20, 30 and 40% solid content using castor oil, octyldodecanol or meadowfoam seed oil. Particle size, viscosity, spreadability, wetting, oil absorption and colour were measured. Four of the nine dispersions were then formulated into lipsticks, including all the 30% pigment dispersions and the 40% dispersion with meadowfoam seed oil. Lipsticks were tested for hardness, pay-off, friction, rheology, colour and stability for 4 weeks. RESULTS: Average particle size was between 6 and 9 µm across the dispersions. The castor oil dispersions were more viscous, stickier and harder to spread than the other dispersions. The wetting contact angle was very low for all three dispersing agents, indicating that all of the oils wet the pigment well. The lipsticks varied in hardness, as expected, based on differences in the viscosity of the dispersing agents, and oil absorption of the powder. Red 7 Lake absorbed the highest amount of castor oil, which contributed to higher stick hardness. The castor oil lipstick and the meadowfoam seed oil lipstick containing 40% pigment were the hardest and most elastic. The octyldodecanol lipstick was the softest. Friction was the lowest for the meadowfoam seed oil lipstick containing 40% pigment, while pay-off was the highest for the octyldodecanol lipstick. The colour of the lipsticks as a stick and after being spread on paper was very similar. CONCLUSION: While the chemical composition and physicochemical properties of the dispersing agents were different, all three dispersing agents studied formed dispersions and lipsticks with appropriate characteristics. Meadowfoam seed oil's performance was qualitatively and quantitatively similar to castor oil and octyldodecanol. By modifying the amount of pigment and dispersing agent used, lipsticks that have similar characteristics to commercial products can be formulated.

OBJECTIF: Les tendances écologiques et durables sont en hausse, ainsi que la demande en ingrédients d'origine naturelle. Les agents de dispersion sont des composants essentiels des rouges à lèvres en raison de leur capacité à mouiller les particules pigmentaires, à réduire les agglomérats et à prévenir la réagglomération en stabilisant les particules pigmentaires. Dans cette étude, l'huile de graines de limnanthe a été évaluée en tant qu'agent de dispersion pigmentaire pour les rouges à lèvres et comparée à l'huile de ricin et à l'octyldodécanol. MÉTHODES: Les dispersions de Red 7 Lake ont été formulées avec une teneur solide de 20, 30 et 40 % à l'aide d'huile de ricin, d'octyldodécanol ou d'huile de graines de limnanthe. La taille des particules, la viscosité, la facilité d'étalement, le mouillage, l'absorption de l'huile et la couleur ont été mesurés. Quatre des neuf dispersions ont ensuite été formulées dans des rouges à lèvres, y compris toutes les dispersions pigmentaires à 30 % et la dispersion à 40 % avec l'huile de graines de limnanthe. Les rouges à lèvres ont été testés pour la dureté, le résultat, la friction, la rhéologie, la couleur et la stabilité pendant 4 semaines. RÉSULTATS: La taille moyenne des particules était comprise entre 6 et 9 µm dans les dispersions. Les dispersions d'huile de ricin étaient plus visqueuses, plus collantes et plus difficiles à étaler que les autres dispersions. L'angle de contact de mouillage était très faible pour les trois agents de dispersion, indiquant que toutes les huiles humidifient bien le pigment. La dureté des rouges à lèvres variait, comme attendu, en fonction des différences de viscosité des agents dispersants et de l'absorption de l'huile de la poudre. Red 7 Lake absorbe la plus grande quantité d'huile de ricin, ce qui contribue à une dureté du bâton plus élevée. Le rouge à lèvres à base d'huile de ricin et le rouge à lèvres à base d'huile de graines de limnanthe contenant 40 % de pigment étaient les plus durs et les plus élastiques. Le rouge à lèvres à base d'octyldodécanol était le plus mou. La friction était la plus basse pour le rouge à lèvres à base d'huile de graines de limnanthe contenant 40 % de pigment, tandis que le résultat était le plus élevé pour le rouge à lèvres à base d'octyldodécanol. La couleur des rouges à lèvres en bâton et après avoir été étalés sur du papier était très similaire. CONCULSION: Alors que la composition chimique et les propriétés physicochimiques des agents de dispersion étaient différentes, les trois agents de dispersion étudiés ont tous formé des dispersions et des rouges à lèvres ayant des caractéristiques appropriées. Les performances de l'huile de graines de limnanthe étaient qualitativement et quantitativement similaires à celles de l'huile de ricin et de l'octyldodécanol. En modifiant la quantité de pigment et d'agent dispersant utilisée, des rouges à lèvres ayant des caractéristiques similaires aux produits commerciaux peuvent être formulés.

Lip balm drying promotes virus attachment: Characterization of lip balm coatings and XDLVO modeling.

HYPOTHESIS: Drying-induced decrease in lip balm surface energy enhances virus adhesion due to the emergence of strong hydrophobic colloid-surface interactions. EXPERIMENTS: A protocol was developed for preparing lip balm coatings to enable physicochemical characterization and adhesion studies. Surface charge and hydrophobicity of four brands of lip balm (dry and hydrated) and human adenovirus 5 (HAdV5) were measured and used to calculate the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) energy of interactions between lip balm coatings and HAdV5 as well as four other colloids: HAdV40, MS2 and P22 bacteriophages, and SiO2. Quartz crystal microbalance with dissipation monitoring (QCM-D) tests employed SiO2 colloids, HAdV5 and hydrated lip balms. FINDINGS: Drying of lip balms results in a dramatic decrease of their surface energy (δΔGsws≥ 83.0 mJ/m2) making the surfaces highly hydrophobic. For dry lip balms, the interaction of the balm surface with all five colloids is attractive. For lip balms hydrated in 150 mM NaCl (ionic strength of human saliva), XDLVO calculations predict that hydrophilic colloids (MS2, P22, SiO2) may attach into shallow secondary minima. Due to the relative hydrophobicity of human adenoviruses, primary maxima in XDLVO profiles are low or non-existent making irreversible deposition into primary energy minima possible. Preliminary QCM-D tests with SiO2 colloids and HAdV5 confirm deposition on hydrated lip balms.

A Willingness-to-Pay Associated Right Prefrontal Activation During a Single, Real Use of Lipsticks as Assessed Using Functional Near-Infrared Spectroscopy.

Understanding consumer preferences and behavior is a major goal of consumer-oriented companies. The application of neuroscience to this goal is a promising avenue for companies. Previously, we observed a positive correlation during actual cosmetic use between the right dorsolateral prefrontal cortex (dlPFC) activity, measured by functional near-infrared spectroscopy (fNIRS), and the associated willingness-to-pay (WTP) values. However, we were unable to find any consistent group differences in the right dlPFC between different powdery foundations. Thus, the main objective of this study was to replicate the previous study and in addition, we aimed to refine the method of the previous study to increase the chance that a difference in valuation between different products can be detected. Twenty-five frequent lipstick using females were asked to apply six different lipsticks to their lips and to record how much they were willing to pay. To maximize the variation of the subjective experience of the products and the associated brain activity, the most preferred color lipstick and a less preferred color lipstick were chosen for each participant, and each color of lipstick had three different textures (Lo, Mid, and Hi). The time series was analyzed with the general linear model (GLM) and the correlation between the right dlPFC beta scores for the lipsticks and their respective WTP values conducted for each participant. This revealed a significant positive correlation and replicated our previous study. Surprisingly, the lipstick color and the texture manipulations did not result in any consistent differences in WTP and similarly no consistent group differences in brain activations. This study replicates our previous study extending it to a different type of cosmetic. The right dlPFC activity during the use of cosmetics may be a potential brain-based personalization or product selection process biomarker.

Butyrospermum parkii butter increased the photostability and in vivo SPF of a molded sunscreen system.

BACKGROUND: Ultraviolet (UV) radiation exposure is related to skin and lip tumors. Therefore, the development of photoprotective lipstick formulations is of utmost importance. AIMS: Considering the biological properties of Shea butter (Butyrospermum parkii), we assessed its potential as an adjuvant in a molded lipstick sunscreen system by in vivo tests and photostability. PATIENTS/METHODS: Shea butter was used in a photoprotective lipstick formulation at two different concentrations (10.0% and 15.0% w/w) associated with ethylhexyl methoxycinnamate (EHM) and titanium dioxide. Skin compatibility was assessed in vivo. The in vivo SPF value was determined according to the current recognized method. Additionally, the photostability of EHM was determined by high-performance liquid chromatography. RESULTS: By the cutaneous compatibility, the product presented no interference with skin barrier and no adverse reactions, thus proving its safety. The in vivo SPF assay showed that the highest concentration of Shea butter increased the in vivo SPF value of the sample by 35%, demonstrating it to be a booster in photoprotective lipstick formulations. Also, Shea butter was proved to enhance the photostability of EHM, a commonly used UVB filter available in several countries. CONCLUSION: Shea butter increased the photostability and in vivo SPF of a molded lipstick sunscreen.

Toxic and potentially toxic elements determination in cosmetics used for make-up: A critical review.

The daily use of cosmetics may expose consumers to localized skin problems and systemic effects caused by absorption of chemical elements. The requirements for suitable quality control and maximum limits for toxic and potentially toxic elements in cosmetics have attracted the attention of the scientific community and of the official institutions around the world. Maximum limits for chemical elements in some cosmetics have been set, but there are disagreements between them. In the same context, many analytical methods have been proposed in the literature, but several challenges during the sample preparation and determination steps related to the high complexity of cosmetics' matrices composition still remain. It is extremely difficulty to establish suitable methods, free of interference, even using modern technology. In this review, methods for determining toxic and potentially toxic elements in cosmetics used for make-up on the lips and on the eye area, covering the period since 2000, are presented. Techniques enabling direct analysis and those requiring a sample preparation step prior to the analysis are also discussed. This review focused on cosmetics for make-up on the lips and on the eye area because the risks of percutaneous absorption and oral ingestion of toxic and potentially toxic elements is higher than in other body regions.