Hybrid Silica Cage-Type Nanostructures Made from Triply Hydrophilic Block Copolymers Single Micelles.

Controlling the structure and functionality of porous silica nanoparticles has been a continuous source of innovation with important potential for advanced biomedical applications. Their synthesis, however, usually involves passive surfactants or amphiphilic copolymers that do not add value to the material after synthesis. In contrast, polyion complex (PIC) micelles based on hydrophilic block copolymers allow for the direct synthesis of intrinsically functional hybrid materials. While most previous studies have focused on bulk materials made from double-hydrophilic block copolymers (DHBC), in this work we have synthesized a triple-hydrophilic block copolymer (THBC) and demonstrated both its PIC micellization and its potential for hybrid mesoporous silica nanomaterials. Introducing this THBC has allowed to direct the transition from bulk three-dimensional (3D) materials to zero-dimensional (0D) nanomaterials with cage-type structures. The stabilization and isolation of these nanostructures formed around discrete individual micelles has been made possible by the careful design of the three different blocks that each play a key role. These nanostructures could also be synthesized from hybrid PIC micelles based on THBC-multivalent metal ions complexes, offering a direct route to metal/silica composite nanoparticles. This class of THBC polymers therefore creates significant opportunities for the synthesis of nanostructures with complex and functional architectures.

Regeneration and Single Stage Batch Adsorber Design for Efficient Basic Blue-41 Dye Removal by Porous Clay Heterostructures Prepared from Al13 Montmorillonite and Pillared Derivatives.

Porous clay heterostructures are a hybrid precursor between the pillaring process and organoclays. In this study, the organoclay was substituted by an aluminium intercalated species clay or pillared alumina clays. A porous clay heterostructure was successfully achieved from an aluminium intercalated species clay, due to the easy exchange of the aluminium species by the cosurfactant and silica species. However, using alumina pillared clays, the porous clay heterostructures were not formed; the alumina species were strongly attached to clay sheets which made difficult their exchange with cosurfactant molecules. In this case, the silica species were polymerized and decorated the surface of the used materials as indicated by different characterization techniques. The specific surface area of the porous clay heterostructure material reached 880 m2/g, and total pore volume of 0.258 cc/g, while the decorated silica alumina pillared clays exhibited lower specific surface area values of 244-440 m2/g and total pore volume of 0.315 to 0.157 cc/g. The potential of the synthesized materials was evaluated as a basic blue-41 dye removal agent. Porous clay heterostructure material has a removal capacity of 279 mg/g; while the other materials exhibited lower removal capacities between 75 mg/g and 165 mg/g. The used regeneration method was related to the acidity of the studied materials. The acidity of the materials possessed an impact on the adopted regeneration procedure in this study, the removal efficiency was maintained at 80% of the original performance after three successive regeneration cycles for the porous clay heterostructure. The Langmuir isotherm characteristics were used to propose a single-stage batch design. Porous clay heterostructures with a higher removal capacity resulted in a decrease in the quantities needed to achieve the target removal percentage of the BB-41 dye from an aqueous solution.

Improved Therapeutic Efficacy: Liposome-Coated Mesoporous Silica Nanoparticles Delivering Thymoquinone to MCF-7 Cells.

BACKGROUND: Breast cancer remains a significant global health challenge, with thymoquinone showing promise as a therapeutic agent, but hindered by poor solubility. OBJECTIVE: This study aimed to enhance TQ delivery to MCF-7 breast cancer cells using mesitylene- mesoporous silica nanoparticles coated with liposomes, designed for controlled drug release. METHODS: Nanoparticles were synthesized using the sol-gel method and coated with phosphatidylserine- cholesterol liposomes. Different nanocharacterization techniques and in vitro assays were employed to assess the drug release kinetics, cellular uptake, cytotoxicity, and apoptosis. RESULTS: The nanoparticles exhibited favorable properties, including a large pore size of 3.6 nm, a surface area of 248.96 m2/g, and a hydrodynamic size of 171.571 ± 8.342 nm with a polydispersity index of 0.182 ± 0.017, indicating uniformity and stability. The successful lipid bilayer coating was confirmed by a zeta potential shift from +6.25 mV to -5.65 mV. The coated nanoparticles demonstrated a slow and sustained drug release profile, with cellular uptake of FITC-formulated nanoparticles being approximately 5-fold higher than free FITC (P < 0.0001). Cytotoxicity assays revealed a significant reduction in cell viability (P < 0.0001), reaching an IC50 value of 25 µM at 48 hours. Apoptosis rates were significantly higher in cells treated with the formulated TQ compared to the free drug and control at both 24 and 48 hours (P < 0.0001). CONCLUSION: This nanoformulation significantly enhanced TQ delivery, offering a promising strategy for targeted breast cancer therapy. Further preclinical studies are recommended to advance this approach in cancer treatment.

Time-of-Flight Secondary Ion Mass Spectrometry Revealing the Organocatalyst Distribution in Functionalized Silica Monoliths.

Hierarchically porous monolithic silica shows promise as a carrier material for immobilized organocatalysts. Conventional analysis usually includes physisorption, infrared spectroscopy and elemental analysis, among others, to elucidate the pore space and degree of functionalization of the material. However, these methods do not yield information about the spatial distribution of the organic species inside the monolithic reactor. In this work, time-of-flight secondary ion mass spectrometry has been applied to characterize the surface of organically functionalized silica monoliths. Cross sections of a silica monolith functionalized with 4-dimethylaminopyridine were analyzed and the results were compared with physisorption and elemental analysis experiments of the same material. This way, insight into the radial distribution of the catalyst could be achieved, which might assist in interpreting the performance of such reactors in heterogeneous flow catalysis.

Cu2O Nanoparticles as Nanocarriers and Its Antibacterial Efficacy.

In this study, Cu2O nanoparticles were synthesized using the sol-gel technique and subsequently functionalized with extracts from plants of the Rauvolfioideae subfamily and citrus fruits. Comprehensive characterization techniques, including UV-Vis spectroscopy, FT-IR, XRD, BET, SEM, and TEM, were employed to evaluate the structural and surface properties of the synthesized nanoparticles. The results demonstrated that both functionalized Cu2O nanoparticles exhibit mesoporous structures, as confirmed by nitrogen adsorption-desorption isotherms and the pore size distribution analysis. The green extract functionalized nanoparticles displayed a more uniform pore size distribution compared to those functionalized with the orange extract. The study underscores the potential of these functionalized Cu2O nanoparticles for applications in drug delivery, catalysis, and adsorption processes, highlighting the influence of the functionalization method on their textural properties and performance in antibacterial efficacy.

Multifunctional and Hierarchical Porous ZIF-8: Amine and Thiol Tagged via Mixed Multivariate Ligand Strategies for Enhanced CO2 and Iodine Adsorption.

This study demonstrated a simple and innovative way of using the direct de novo synthesis to fabricate the mesoporous structure and diverse functionality of ZIF-8 for environmental cleanup and gas storage applications. By introducing different ligands, we have developed a version of ZIF-8 that could better capture carbon dioxide (CO2) and iodine. The ZIF-8 was successfully designed to have the hierarchical and mesoporous structure with the functional groups of amine and thiol groups by adjusting the pKa values (from 8 to 12) of ligand instead of original ligand, 2-methyl imidazole (Hmim, pKa~14.2). The modulation of ZIF-8 particle size, porosity, and functional characteristics was achieved through varied ligands and their concentrations, streamlined into a single and room-temperature synthesis condition. The resulting ZIF-8 materials exhibit intricate hierarchical architectures and a high density of functional groups, significantly enhancing molecular diffusion and accessibility. Among the developed materials, ZIF-8-AS, featuring both amine and thiol groups, demonstrates the fastest adsorption kinetics and a twofold increase in iodine adsorption capacity (qm = 1101.5 mg·g-1) compared to ZIF-8 (qm = 514.3 mg·g-1). Furthermore, the hierarchical mesoporosity of ZIF-8-A-10.1 improves CO2 adsorption to 1.0 mmol·g-1 at 298 K, which is 1.3 times higher than that of the microporous ZIF-8.

Single-Atom Au-Functionalized Mesoporous SnO2 Nanospheres for Ultrasensitive Detection of Listeria monocytogenes Biomarker at Low Temperatures.

Semiconductor metal oxide gas sensors have been proven to be capable of detecting Listeria monocytogenes, one kind of foodborne bacteria, through monitoring the characteristic gaseous metabolic product 3-hydroxy-2-butanone. However, the detection still faces challenges because the sensors need to work at high temperatures and output limited gas sensing performance. The present study focuses on the design of single-atom Au-functionalized mesoporous SnO2 nanospheres for the sensitive detection of ppb-level 3-hydroxy-2-butanone at low temperatures (50 °C). The fabricated sensors exhibit high sensitivity (291.5 ppm-1), excellent selectivity, short response time (10 s), and ultralow detection limit (10 ppb). The gas sensors exhibit exceptional efficacy in distinguishing L. monocytogenes from other bacterial strains (e.g., Escherichia coli). Additionally, wireless detection of 3-hydroxy-2-butanone vapor is successfully achieved through microelectromechanical systems sensors, enabling real-time monitoring of the biomarker 3-hydroxy-2-butanone. The superior sensing performance is ascribed to the mesoporous framework with accessible active Au-O-Sn sites in the uniform sensing layer consisting of single-atom Au-modified mesoporous SnO2 nanospheres, and such a feature facilitates the gas diffusion, adsorption, and catalytic conversion of 3-hydroxy-2-butanone molecules in the sensing layer, resulting in excellent sensing signal output at relatively low temperature that is favorable for developing low-energy-consumption gas sensors.

Xerogel mesoporous materials based on ultrastable Blatter radicals for efficient sorption of nitric oxide.

The reduction of hazardous nitric oxide emissions remains a significant ecological challenge. Despite the variety of possibilities, sorbents able to capture low concentrations of NO from flue gas with high selectivity are still in demand. In this work a new type of mesoporous xerogel material highly loaded with ultrastable Blatter radicals (BTR, >60 % by mass) that act as selective NO sorption sites is developed. Electron Paramagnetic Resonance (EPR) spectroscopy evidences reversible NO sorption in nanometer-scale pores of BTR-based xerogels and indicates the high NO capacity of such radical-rich sorbent. Efficient NO capture from model flue gas mixture is also evidenced in experiments with a fixed bed reactor. Such advanced properties of new materials as selectivity, strong binding with NO and an ability for mild regeneration via thermodesorption promote them for future ecological applications.

One-Dimensional Single-Crystal Mesoporous TiO2 Supported CuW6O24 Clusters as Photocatalytic Cascade Nanoreactor for Boosting Reduction of CO2 to CH4.

Constructing nanoreactors with multiple active sites in well-defined crystalline mesoporous frameworks is an effective strategy for tailoring photocatalysts to address the challenging of CO2 reduction. Herein, one-dimensional (1-D) mesoporous single-crystal TiO2 nanorod (MS-TiO2-NRs, ≈110 nm in length, high surface area of 117 m2 g-1, and uniform mesopores of ≈7.0 nm) based nanoreactors are prepared via a droplet interface directed-assembly strategy under mild condition. By regulating the interfacial energy, the 1-D mesoporous single-crystal TiO2 can be further tuned to polycrystalline fan- and flower-like morphologies with different oxygen vacancies (Ov). The integration of single-crystal nature and mesopores with exposed oxygen vacancies make the rod-like TiO2 nanoreactors exhibit a high-photocatalytic CO2 reduction selectivity to CO (95.1%). Furthermore, photocatalytic cascade nanoreactors by in situ incorporation of CuW6O24 (W-Cu) clusters onto MS-TiO2-NRs via Ov are designed and synthesized, which improved the CO2 adsorption capacity and achieved two-step CO2-CO-CH4 photoreduction. The second step CO-to-CH4 reaction induced by W-Cu sites ensures a high generation rate of CH4 (420.4 µmol g-1 h-1), along with an enhanced CH4 selectivity (≈94.3% electron selectivity). This research provides a platform for the design of mesoporous single-crystal materials, which potentially extends to a range of functional ceramics and semiconductors for various applications.

Electrosynthesis-Induced Pt Skin Effect in Mesoporous Ni-Rich Ni-Pt Thin Films for Hydrogen Evolution Reaction.

A Pt skin effect, i.e., an enrichment of Pt within the first 1-2 nm from the surface, is observed in as-prepared electrodeposited Ni-rich Ni-Pt thin films. This effect, revealed by Rutherford backscattering (RBS), is present for both dense thin films and mesoporous thin films synthesized by micelle-assisted electrodeposition from a chloride-based electrolyte. Due to the Pt skin effect, the Ni-rich thin films show excellent stability at the hydrogen evolution reaction (HER) in acidic media, during which a gradient in the Pt/Ni ratio is established along the thickness of the thin films, while the activity at the HER remains unaffected by this structural change. Further characterization by elastic recoil detection with He ions analysis shows that hydrogen profiles are similar to those of Pt: a surface hydrogen peak coincides with the Pt skin, and a gradient in hydrogen concentration is established during HER in acidic media, together with a considerable uptake in hydrogen. A comparative study shows that in alkaline media, hydrogen evolution has little to no effect on the structural properties of the thin films, even for much longer times of exposure. The mesoporous thin films, in addition to their higher efficiency at HER compared to dense thin films, also show lower internal stress, as determined by Rietveld refinement of grazing incidence X-ray diffraction patterns. The latter also reveal a fully single-phase and nanocrystalline structure for all thin films with varying Ni contents.

Flexible Mesopores in Nanoscrolls: Extraordinarily Large Alteration of Pore Sizes and Their Reversibility.

Flexible porous materials have gained considerable interest for their potential applications in selective absorption and controlled release/storage of specific molecules or compounds. Here, nanoscrolls are proposed as a type of inorganic solids with reversibly flexible mesopores. Nanoscrolls exhibit a rolled-up structure composed of nanosheets with a 1D rod-like morphology, possessing two distinct nanospaces. The first space comprises 1D tubular mesopores located at the center of the rod, while the second space exists in the interlayer regions on the wall of the mesopore, resulting from the layer stacking caused by the scrolling of nanosheets. By replacing the interlayer cations on the nanoscroll walls with other cations, a drastic alteration in the size of the 1D mesopores is observed. For instance, exchanging bulky dodecylammonium cations with small NH4 + cations leads to a substantial change in pore size, with differences ranging from 10 to 20 nm-a notably larger variation compared to previous reports on flexible porous materials. Importantly, the alteration of pore size induced by the exchange reaction is found to be reversible. This reversible alteration in pore size holds promise for applications in host-guest chemistry involving large moieties such as nanoparticles and enzymes.

Collaborative adsorption and photocatalytic degradation of high concentration pharmaceutical pollutants in water using a novel dendritic fibrous nano-silica modified with chitosan and UiO-66.

This study presents a novel hybrid mesoporous material for degrading drug pollutants in water. The hybrid materials, derived from UiO-66 metal-organic framework and chitosan, coated on nano-silica, showed excellent drug adsorption through hydrogen-bonding interactions and efficient photodegradation of antibiotics. The hybrid material's enhanced conductivity and reduced band gap significantly improved pollution reduction by minimising electron-hole recombination. This allows for more efficient charge transport and better light absorption, boosting the material's ability to break down pollutants. Structural and morphological analyses were conducted using various techniques, including scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Optimising the adsorption-photodegradation process involved investigating pH, catalyst dose, and radiation time. Non-linear optimisation revealed an efficiency exceeding 85 % for 400 mg/L tetracycline and doxycycline, the model antibiotics. The optimal parameters for maximal elimination were determined as pH = 4.3, hybrid mesosphere dose = 4.0 mg/mL, and radiation time = 10 min. Kinetic studies favored pseudo-second-order diffusion models over pseudo-first-order models. The hybrid mesosphere showed sustained efficiency after three cycles and performed well in real aqueous samples, removing over 80 % of each antibiotic. This study demonstrates the potential of the hybrid mesoporous material for removing pharmaceutical pollutants in water systems.

2D PtRhPb Mesoporous Nanosheets with Surface-Clean Active Sites for Complete Ethanol Oxidation Electrocatalysis.

The development of active and selective metal electrocatalysts for complete ethanol oxidation reaction (EOR) into desired C1 products is extremely promising for practical application of direct ethanol fuel cells. Despite some encouraging achievements, their activity and selectivity remain unsatisfactory. In this work, it is reported that 2D PtRhPb mesoporous nanosheets (MNSs) with anisotropic structure and surface-clean metal site perform perfectly for complete EOR electrocatalysis in both three-electrode and two-electrode systems. Different to the traditional routes, a selective etching strategy is developed to produce surface-clean mesopores while retaining parent anisotropy quasi-single-crystalline structure without the mesopore-forming surfactants. This method also allows the general synthesis of surface-clean mesoporous metals with other compositions and structures. When being performed for alkaline EOR electrocatalysis, the best PtRhPb MNSs deliver remarkably high activity (7.8 A mg-1) and superior C1 product selectivity (70% of Faradaic efficiency), both of which are much better than reported electrocatalysts. High performance is assigned to multiple structural and compositional synergies that not only stabilized key OHads intermediate by surface-clean mesopores but also separated the chemisorption of two carbons in ethanol by adjacent Pt and Rh sites, which facilitate the oxidation cleavage of stable C─C bond for complete EOR electrocatalysis.

Mesoporous Metal Sponges Produced by Explosive Decomposition.

The formation of mesoporous gold sponges by explosive decomposition of 'knallgold' (also known as 'fulminating' gold) is studied. Proof-of-principle experiments are conducted and then the phenomena are further investigated using 'toy physics' molecular dynamics simulations. The simulations invoked various ratios of a volatile Lennard-Jones element G and a noble metal element N. In both experiment and simulation the morphology of the resulting sponge is found to depend on the stoichiometry of the starting material. As the mole fraction of G (χG) is increased from 0.5 to close to 1.0 in the simulations, the morphology of the sponges changes from closed to open, with a corresponding increase in the average mean curvature from 0 to +0.12 inverse Lennard-Jones length (L) units. The average Gaussian curvature of the simulated sponges is always negative, with the minimum value of 0.05 L-2 being found for χG≈0.65. In broad agreement with experiment, sponge formation in the simulations is bounded by stoichiometry; no sponges form if χG is <0.52, for χG between 0.52 and 0.70 the sponge is characterized by vermicular cavities whereas classic bicontinuous fibrous sponges form for 0.70<χG<0.85 and, finally, discrete particles result if χG>0.85.

Progress in Core-Shell Magnetic Mesoporous Materials for Enriching Post-Translationally Modified Peptides.

Endogenous peptides, particularly those with post-translational modifications, are increasingly being studied as biomarkers for diagnosing various diseases. However, they are weakly ionizable, have a low abundance in biological samples, and may be interfered with by high levels of proteins, peptides, and other macromolecular impurities, resulting in a high limit of detection and insufficient amounts of post-translationally modified peptides in real biological samples to be examined. Therefore, separation and enrichment are necessary before analyzing these biomarkers using mass spectrometry. Mesoporous materials have regular adjustable pores that can eliminate large proteins and impurities, and their large specific surface area can bind more target peptides, but this may result in the partial loss or destruction of target peptides during centrifugal separation. On the other hand, magnetic mesoporous materials can be used to separate the target using an external magnetic field, which improves the separation efficiency and yield. Core-shell magnetic mesoporous materials are widely utilized for peptide separation and enrichment due to their biocompatibility, efficient enrichment capability, and excellent recoverability. This paper provides a review of the latest progress in core-shell magnetic mesoporous materials for enriching glycopeptides and phosphopeptides and compares their enrichment performance with different types of functionalization methods.

Application of Stemphylium lycopersici Extracts Immobilized on MCM-48type Mesoporous Materials as Biocatalysts for Monoacylglycerol Production.

Monoacylglycerols are eco-friendly and inexpensive emulsifiers with a range of applications. The traditional synthetic route is not eco-friendly, while enzymatic catalysis offers milder reaction conditions and higher selectivity. However, its application still is limited due to the costs. In this context, endophytic fungi can be source to new biocatalysts with enhanced catalytic activity. Based on this perspective, the aim of this study was perform the synthesis of MAG's through transesterification reactions of solketal and different vinyl esters, using crude and immobilized lipolytic extracts from the endophytic fungi Stemphylium lycopersici, isolated from Humiria balsamifera. The reactions were conducted using 100 mg of biocatalyst, 1 mmol of substrates, 9 : 1 n-heptane/acetone, at 40 °C, 200 rpm for 96 h. In the reactions using the ILE and stearate, laureate and decanoate vinyl esters it was possible to obtain the correspondent products with conversion rates of 52-75 %. Also, according to the structure drivers used in MCM-48 synthesis, different morphologies and conversions rates were observed. Employing [C16MI] Cl, [C14MI] Cl and [C4MI] Cl, the 1-lauroyl- glycerol conversion was 36 %, 79 % and 44 %, respectively. This is the first work involving the immobilization of an endophytic fungi and its utilization as a biocatalyst in the production of MAG's.

Highly Efficient Separation of Ethanol Amines and Cyanides via Ionic Magnetic Mesoporous Nanomaterials.

Simple and efficient sample pretreatment methods are important for analysis and detection of chemical warfare agents (CWAs) in environmental and biological samples. Despite many commercial materials or reagents that have been already applied in sample preparation, such as SPE columns, few materials with specificity have been utilized for purification or enrichment. In this study, ionic magnetic mesoporous nanomaterials such as poly(4-VB)@M-MSNs (magnetic mesoporous silicon nanoparticles modified by 4-vinyl benzene sulfonic acid) and Co2+@M-MSNs (magnetic mesoporous silicon nanoparticles modified by cobalt ions) with high absorptivity for ethanol amines (EAs, nitrogen mustard degradation products) and cyanide were successfully synthesized. The special nanomaterials were obtained by modification of magnetic mesoporous particles prepared based on co-precipitation using -SO3H and Co2+. The materials were fully characterized in terms of their composition and structure. The results indicated that poly(4-VB)@M-MSNs or Co2+@M-MSNs had an unambiguous core-shell structure with a BET of 341.7 m2·g-1 and a saturation magnetization intensity of 60.66 emu·g-1 which indicated the good thermal stability. Poly(4-VB)@M-MSNs showed selective adsorption for EAs while the Co2+@M-MSNs were for cyanide, respectively. The adsorption capacity quickly reached the adsorption equilibrium within the 90 s. The saturated adsorption amounts were MDEA = 35.83 mg·g-1, EDEA = 35.00 mg·g-1, TEA = 17.90 mg·g-1 and CN-= 31.48 mg·g-1, respectively. Meanwhile, the adsorption capacities could be maintained at 50-70% after three adsorption-desorption cycles. The adsorption isotherms were confirmed as the Langmuir equation and the Freundlich equation, respectively, and the adsorption mechanism was determined by DFT calculation. The adsorbents were applied for enrichment of targets in actual samples, which showed great potential for the verification of chemical weapons and the destruction of toxic chemicals.

Maillard Reaction Inspired Microexplosion toward Fast Synthesis of Two-Dimensional Mesoporous Tin Oxides for Efficient Chemiresistive Gas Sensing.

Two-dimensional (2D) mesoporous transition metal oxides are highly desired in various applications, but their fast and low-cost synthesis remains a great challenge. Herein, a Maillard reaction inspired microexplosion approach is applied to rapidly synthesize ultrathin 2D mesoporous tin oxide (mSnO2). During the microexplosion between granular ammonia nitrate with melanoidin at high temperature, the organic species can be carbonized and expanded rapidly due to the instantaneous release of gases, thus producing ultrathin carbonaceous templates with rich functional groups to effectively anchor SnO2 nanoparticles on the surface. The subsequent removal of carbonaceous templates via calcination in air results in the formation of 2D mSnO2 due to the confinement effect of the templates. Pd nanoparticles are controllably deposited on the surface of 2D mSnO2 via in situ reduction, forming ultrathin 2D Pd/mSnO2 nanocomposites with thicknesses of 6-8 nm. Owing to the unique 2D mesoporous structure with rich oxygen defects and highly exposed metal-metal oxide interfaces, 2D Pd/mSnO2 exhibits excellent sensing performance toward acetone with high sensitivity, a short response time, and good selectivity under low working temperature (100 °C). This fast and convenient microexplosion synthesis strategy opens up the possibility of constructing 2D porous functional materials for various applications including high-performance gas sensors.

Histidine-modified pillar[5]arene-functionalized mesoporous silica materials for highly selective enantioseparation.

Chiral enantiomers, especially the enantiomers of chiral drugs often exhibit different pharmacological activity, metabolism and toxicity, thus it is of great research significance to scientifically and reasonably develop single chiral drugs with low toxicity and high efficiency. Among them, high performance liquid chromatographic techniques based on chiral stationary phases (CSPs) has become one of the most attractive methods used to evaluate the enantiomeric purity of single-enantiomers compound of pharmacological relevance. In this work, pillar[5]arene functionalized with L- and D-histidine, respectively, were modified on the surface of mesoporous silica as novel chiral stationary phases called L/DHis-BP5-Sil. Notably, L/D-histidine had the characteristics of low steric hindrance and easy derivatization. Although the π-π interaction of imidazole group was weaker than that of benzene ring, the benzene ring bonding imidazole-conjugated ring in the structure produced better enantioseparation effect. The results showed that L/DHis-BP5-Sil can separate a variety of complex structural enantiomers with excellent reproducibility, thermal stability and separation performance. Hence, the unique advantage of the highly selective separation of L/DHis-BP5-Sil provides new insights into the enantioseparation field.

Optimization of Cyanocobalamin (Vitamin B12) Sorption onto Mesoporous Superparamagnetic Iron Oxide Nanoparticles.

The techniques used to detect and quantify cyanocobalamin (vitamin B12) vary considerably in terms of detection sensitivity, from the most sensitive, based on radioisotopes and mass spectrometry (MS) with limits of detection (LOD) in fg mL-1, to fluorescence (FL) and surface plasmon resonance (SPR) biosensors with LOD values in the range of a few µg mL-1. For accurate quantification of an analyte present at trace levels in complex biological matrices, a selective separation and enrichment step is required to overcome matrix interferences and ensure sufficient detection sensitivity. In this study, iron oxide magnetic nanoparticles (IONPs) were used for the extraction and initial preconcentration of cyanocobalamin (vitamin B12). In the dependence of the magnetization on the H-field (hysteresis loop), no coercivity and remanence values were found at 300 K, indicating the superparamagnetic properties of the tested IONPs. Perfluorinated acids were used as amphiphilic agents to allow the sorption of cyanocobalamin onto the IONPs. FT-IR/ATR spectroscopy was used to confirm the sorption of cyanocobalamin on the IONPs. The influence of the addition of a homologous series of perfluorinated acids such as trifluoroacetic acid (TFAA), heptafluorobutyric acid (HFBA), and trichloroacetic acid (TCAA) to the extraction mixture was tested considering their type, mass, and time required for effective sorption. The adsorption kinetics and isotherm, described by the Freundlich and Langmuir equations, were analyzed. The maximum adsorption capacity (qm) exceeded 6 mg g-1 and was 8.9 mg g-1 and 7.7 mg g-1 for HFBA and TCAA, respectively, as the most efficient additives. After the desorption process using aqueous KH2PO4 solution, the sample was finally analyzed spectrophotometrically and chromatographically. The IONP-based method was successfully applied for the isolation of cyanocobalamin from human urine samples. The results showed that the developed approach is simple, cheap, accurate, and efficient for the determination of traces of cyanocobalamin in biological matrices.