The potential correlation between the succession of microflora and volatile flavor compounds during the production of Zhenba bacon.

Microbial composition plays an important role in the quality and flavor of bacon. The aims of this study were to detect bacterial community succession using high-throughput sequencing (HTS) and volatile flavor compound changes using gas chromatography-ion mobility spectrometry (GC-IMS) during the production of Zhenba bacon. The results showed that a total of 70 volatile compounds were detected. Among them, ketones, hydrocarbons, aldehydes, esters and alcohols were the main substances in the curing and smoking stages. In addition, the fungal abundance was greater than the bacterial abundance, and there was obvious succession of the microbial community with changes in fermentation time and processing technology. The main functional bacterial genera in the curing and smoking stages were Staphylococcus, Psychrobacter and Latilactobacillus, and the main fungal genera were Fusarium and Debaryomyces. Through correlation analysis, we found that pyrrole, 2-pentanol, methyl isobutyl ketone (MIBK) and ethyl acetate (EA) were significantly correlated with Staphylococcus, Psychrobacter, Pseudomonas and Myroides (p < 0.01), and it is speculated that they contribute significantly to flavor formation. The results of this study are helpful for understanding the microbial dynamics and characteristic volatile flavor compounds in Zhenba bacon, and provide new insights into the relationship between microorganisms and flavor through potential correlations.

Anodic Polymerization of Phenylphenols in Methyl Isobutyl Ketone and Mesityl Oxide: Incorporation of a Cavitand into the Layers Formed for Sensing Phenols in Organic Media.

The electropolymerization of three phenylphenol isomers was studied in methyl isobutyl ketone and mesityl oxide, and the remarkable differences highlighted the importance of the carbon-carbon double bond in mesityl oxide. In the case of each substrate, a brownish deposit formed during the electrooxidation. The obvious difference between the polymers formed from the two solvents was recognized via voltammetric signal enhancement of 4-methoxyphenol and 4-chlorophenol, and it was only observed in the case of mesityl oxide. The experiments highlighted that incorporation of a cavitand with biphenyl groups on the upper rim of the polymers of phenylphenols improved the results to a small extent. The cavitand was, itself, electroactive without any fouling effect. As 2-phenylphenol is by far the cheapest of the three isomers, a cavitand was incorporated into its polymer, which was exploited to solve analytical problems while mesityl oxide was used as solvent. Useful quantifications were achieved in organic solvents; however, it failed under aqueous conditions due to the high hydrophobicity of the deposit. Application of differential pulse voltammetry for 4-methoxyphenol and 4-chlorophenol gave detection limits of 9.28 and 50.8 µM in acetonitrile, respectively. This procedure resulted in the immobilization of cavitand derivatives onto the electrode's surface, and the layer formed offered selective sensing of phenols by electrochemical methods.

Evaluation of Acidic Ionic Liquids as Catalysts for Furfural Production from Eucalyptus nitens Wood.

Eucalyptus nitens wood samples were subjected to hydrothermal processing to obtain soluble saccharides from the hemicellulosic fraction. The hemicellulose-derived saccharides were employed as substrates for furfural production in biphasic media made up of water, methyl isobutyl ketone, and one acidic ionic liquid (1-butyl-3-methylimidazolium hydrogen sulfate or 1-(3-sulfopropyl)-3-methylimidazolium hydrogen sulfate). The reactions were carried out in a microwave-heated reactor to assess the effects of the most influential variables. Under selected operational conditions, the molar conversions of the precursors into furfural were within the range of 77-86%. The catalysts conserved their activity after reutilization in five consecutive reaction cycles.

[Determination of methyl isobutyl ketone in urine by headspace coupled with gas chromatography-mass spectrometry].

Objective: To establish a method for the determination of methyl isobutyl ketone (MIBK) in urine samples by headspace-gas chromatography-mass spectrometry. Methods: Automatic headspace sampling technique was adopted to optimize the headspace conditions (headspace bottle heating temperature and equilibration time) and gas chromatographic conditions. A total of 5 ml samples were taken and added with 3.0 g ammonium sulfate into a 20 ml headspace bottle. After heated at 60 ℃ for 30 mins, gas from the upper part of headspace bottle was injected into gas chromatography with an injection volume of 100 µl. The target was separated by HP-5MS UI (30 m×0.25 mm×0.25 µm) capillary column and then detected by mass spectrometry detector. The retention time and external standard method were used for qualitative and quantitative analysis of MIBK in samples, respectively. Results: The standard curve of MIBK showed significant linearity between 20.0-1 000.0 µg/L. The standard curve was y=62.9x-652.5, and the correlation coefficient r=0.9998. The detection limit of MIBK was 5.0 µg/L and the quantification limit of MIBK was 16.0 µg/L. The average recovery rate was 95.3%~100.2% at three spiked concentrations of low (50.0 µg/L) , medium (200.0 µg/L) and high (500.0 µg/L) . The intra-day and inter-day precisions were 1.7%~3.8% (n=6) and 1.2%~4.0% (n=6) respectively. This method was stable for the determination of MIBK, and the urine could be kept 14 d at -20 ℃ without significantly loss. Conclusion: This method is proved to be simple, practical and highly sensitive. It can satisfy the request for the determination of urine samples of workers exposed to MIBK.

Solvent-Impregnated Sorbents for Tantalum from Niobium Separation Using a Fixed-Bed Column.

Reactor-grade niobium steel is used as a construction material for nuclear reactors. In this case, the presence of tantalum, which is characterized by a 20 times higher active cross section for capturing thermal neutrons than the cross section of niobium (181Ta: 21.3 barn), cannot exceed 100 ppm. Analytical methods for quality and new separation method development control need very pure niobium matrices-niobium compounds with a low tantalum content, which are crucial for preparing matrix reference solutions or certified reference materials (CRMs). Therefore, in this paper, a new, efficient method for separating trace amounts of Ta(V) from Nb(V) using extraction chromatography with the use of sorbents impregnated with methyl isobutyl ketone MIBK solvent is proposed. Various types of MIBK-impregnated sorbents were used (AG® 1-X8 Anion Exchange Resin, AMBERLITE™ IRC120 Na Ion Exchange Resin, SERVACEL® Cellulose Anion Exchangers DEAE 52, active carbons of various grain size, carbonized blackcurrant pomace, carbonized chokeberry pomace, bentonite, and polyurethane foam in lumps). The highest tantalum removal efficiency was determined using active coal-based materials (>97%). The separation effectivity of tantalum from niobium was also determined in dynamic studies using a fixed-bed column with MIBK-impregnated active carbon. Solutions of various Nb:Ta weight ratios (1:1, 100:1, 1000:1) were used. The most impressive result was obtaining 70 mL of high purity niobium solution of tantalum content 0.027 ppm (in relation to Nb) with 88.4% yield of niobium from a solution of Nb:Ta, weight ratio 1000:1 (purge factor equaled 35,000). It proves the presented system to be applicable for preparation of pure niobium compounds with very low contents of tantalum.

Screening of a Novel Solvent for Optimum Extraction of Anionic Surfactants in Water.

Anionic surfactants (AS) are detrimental aquatic pollutants due to their well-characterized toxicity to aquatic organisms. The concentration of AS in aquatic environments is increasing because of their extensive use in many industries and households. The standard reference method for AS analysis is to determine a methylene blue active substance (MBAS) complex formed between AS and the methylene blue (MB) cation by using chloroform. However, chloroform has a low AS extraction efficiency and other limiting properties, such as a high density and volatility, which make the conventional AS analytical method time-consuming and labor-intensive. In an effort to replace the use of chloroform, this study was carried out to screen novel solvents for their ability to extract AS in water samples. Criteria were based on AS extraction efficiency, physicochemical properties, and the stability of the solvent under different environmental conditions. Organic solvents, such as methyl isobutyl ketone (MIBK), 1,2-dichloroethane (DCE), dichloromethane, benzene, and n-hexane, were assessed. In extraction of the anionic surfactant sodium dodecyl sulfate (SDS), the mixture of MIBK-DCE (3:1) proved to be an optimum solvent as an alternative to chloroform. It not only enhanced SDS extractability but also improved properties, such as having a lower volatility, a lower density than water, and a quicker phase separation. Among solvents screened, no one single solvent in SDS extraction could meet such criteria. The performance of the MIBK-DCE (3:1) mixture in SDS extraction was stable, irrespective of pH and ionic strength of the SDS solution, washing process, and presence of cations. Anionic interference from halogen and polyatomic and organic anions in SDS extraction by MIBK-DCE (3:1) existed only at an elevated concentration, which is not occurring in the natural aquatic environment. Results demonstrated that a MIBK-DCE (3:1) mixture solvent could be used in AS analysis for a wide range of aquatic samples and it could be the basis for the development of a new analytical method to replace conventional chloroform.

Comparative study of degradation of toluene and methyl isobutyl ketone (MIBK) in aqueous solution by pulsed corona discharge plasma.

Effectiveness of pulsed power plasma for the degradation of two toxic volatile organic compounds (VOCs), toluene and methyl isobutyl ketone (MIBK), in aqueous solution was evaluated. The plasma degradation of MIBK has been studied for the first time. The influence of initial concentration of target compound, solution pH and scavengers on percentage degradation was evaluated. 100% removal of 200 mg/L of toluene and MIBK was achieved both in liquid and gaseous phases after 12 and 16 min of plasma treatment, respectively. The first order rate constant of toluene and MIBK degradation (for 200 mg/L each) was 0.421 and 0.319 min-1 respectively when they were treated individually, and these values decreased slightly during degradation of their mixture. MIBK degradation was slower than toluene and it might be due to semi volatile and hydrophilic nature of MIBK. The effect of initial concentration of toluene and MIBK showed different degradation patterns. Highest degradation of both the compounds was obtained in neutral pH and in absence of scavengers. •OH radical was the major reactive species involved in their degradation. Their degradation in real environmental matrices showed that removal reduced significantly in secondary effluent due to scavenging of reactive species by various ions and organic matter. The total number of degradation intermediates identified in case of toluene and MIBK was 11 and 14 respectively and formate was the one recalcitrant byproduct generated. The degradation pathway of toluene and MIBK involving reactions of reactive oxygen and nitrogen species and reductive species is proposed.

Carbon Materials as Phase-Transfer Promoters for Obtaining 5-Hydroxymethylfurfural from Cellulose in a Biphasic System.

Different carbonaceous materials were tested as mass-transfer promoters for increasing the yield of 5-hydroxymethylfurfural (5-HMF) in biphasic cellulose hydrolysis. The benefits of working with a biphasic system (water/methyl isobutyl ketone) under soft acid conditions were taken as starting point (no humins or levulinic acid production), with slow extraction kinetics as the weakest point of this approach. Carbon nanotubes (CNTs) and activated carbon (AC) were proposed to improve 5-HMF liquid-liquid mass transfer. A kinetic analysis of the extraction process indicated the competition between 5-HMF and glucose adsorption as the main cause of the poor results obtained with AC. In contrast, very promising results were obtained with CNTs, mainly at 1.5 wt % loading, with complete transfer of HMF and a high global mass-transfer coefficient. The use of CNTs improved the amount of 5-HMF in the organic phase by more than 270 %.

Novel synthesis of nanoscale zerovalent iron from coal fly ash and its application in oxidative degradation of methyl orange by Fenton reaction.

We firstly developed a novel synthesis method of nanoscale zerovalent iron (NZVI) using Fe sources in coal fly ash (CFA) for the oxidative degradation of methyl orange by Fenton reaction. Hydrochloric acid (HCl) and methyl isobutyl ketone (MIBK) were used for Fe dissolution from CFA and selective Fe(III) chelation, respectively. Among varied HCl concentrations, 7 N HCl showed the best performance for the oxidation of aqueous Fe(II) to Fe(III) and efficient chelation of Fe(III) with MIBK. The NZVI-CFA was synthesized by adding NaBH4 to a solution of Fe(III)-chelated MIBK, yielding NZVI transformation >95% from Fe(III) in HCl. Various surface analyses were performed to characterize the NZVI-CFA, which was almost identical to typical NZVI-Bare. HCl and MIBK could be reused several times, indicating potential reusability of chemicals used in the synthesis. Remarkable >96% decolorization of methyl orange was obtained by the NZVI-CFA-induced Fenton reaction at pH 3, with a ∼22% decrease in total organic carbon in 7 min. The heterogeneous Fenton reaction initiated by NZVI-CFA with H2O2 showed reactivity similar to that of the homogeneous Fenton reaction (i.e., aqueous Fe(II) with H2O2), indicating the importance of homogeneous reaction for the oxidative degradation of methyl orange.

Potential impact of methyl isobutyl ketone (MIBK) on phenols degradation in an UASB reactor and its degradation properties.

Methyl isobutyl ketone (MIBK) as a solvent is extensively used for the phenols extraction from the wastewater, so it is unavoidable to expose in the effluent due to the solubility and leakage problem. The present study evaluated the impact of MIBK on phenols degradation in an UASB reactor and analyzed its degradation properties. The results indicated that the continuous dosing (0.1gL-1) and impact (10gL-1) of MIBK had limited effect on phenols removal (1-2% reduction) in the UASB reactor, but the specific methanogenic activity (SMA) values of sludge decreased by 45-75% after MIBK exposure. Anaerobic degradation rate of MIBK fitted well to a pseudo-first-order kinetic equation with respect to the initial concentration of 35mgL-1 (k=0.0115h-1, R2=0.9664). Furthermore, the relative methane generation rate constants of MIBK were 0.00816, 0.00613, 0.00273, and 0.00207d-1 at the initial concentrations of 0.1, 0.5, 5, and 10gL-1, respectively. MIBK showed higher inhibitory effect on the methanogenesis than on phenols degradation. This study pointed out that the industrial installations should consider the influence of solvent on anaerobic treatment of phenolic wastewater.

Double enzymatic hydrolysis preparation of heme from goose blood and microencapsulation to promote its stability and absorption.

Iron deficiency anemia (IDA) is the most common nutritional deficiency worldwide. This deficiency could be solved by preparing stable, edible, and absorbable iron food ingredients using environmentally friendly methods. This study investigated enzymatic hydrolysis and microencapsulation process of goose blood. The physicochemical properties, stabilities of the microencapsulated goose blood hydrolysate (MGBH) and a supplement for rats with IDA were also evaluated. The results showed that the synergetic hydrolytic action of neutrase and alkaline protease significantly increased the heme-releasing efficiency. The heme was then microencapsulated using sodium caseinate, maltodextrin and carboxymethyl cellulose (CMC) as the edible wall material, and the encapsulation efficiency of the product reached 98.64%. Meanwhile, favorable thermal, storage and light stabilities were observed for the microencapsulation. It was found that MGBH can significantly improve the body weight and hematological parameters of IDA Wistar rat.

Methyl isobutyl ketone exposure-related increases in specific measures of α2u-globulin (α2u) nephropathy in male rats along with in vitro evidence of reversible protein binding.

Chronic exposure to methyl isobutyl ketone (MIBK) resulted in an increase in the incidence of renal tubule adenomas and occurrence of renal tubule carcinomas in male, but not female Fischer 344 rats. Since a number of chemicals have been shown to cause male rat renal tumors through the α2u nephropathy-mediated mode of action, the objective of this study is to evaluate the ability of MIBK to induce measures of α2u nephropathy including renal cell proliferation in male and female F344 rats following exposure to the same inhalation concentrations used in the National Toxicology Program (NTP) cancer bioassay (0, 450, 900, or 1800ppm). Rats were exposed 6h/day for 1 or 4 weeks and kidneys excised approximately 18h post exposure to evaluate hyaline droplet accumulation (HDA), α2u staining of hyaline droplets, renal cell proliferation, and to quantitate renal α2u concentration. There was an exposure-related increase in all measures of α2u nephropathy in male, but not female rat kidneys. The hyaline droplets present in male rat kidney stained positively for α2u. The changes in HDA and α2u concentration were comparable to d-limonene, an acknowledged inducer of α2u nephropathy. In a separate in vitro study using a two-compartment vial equilibration model to assess the interaction between MIBK and α2u, the dissociation constant (Kd) was estimated to be 1.27×10(-5)M. This Kd is within the range of other chemicals known to bind to α2u and cause nephropathy. Together, the exposure-related increase in measures of α2u nephropathy, sustained increase in renal cell proliferation along with an indication of reversible binding of MIBK to α2u, support the inclusion of MIBK in the category of chemicals exerting renal effects through a protein droplet α2u nephropathy-mediated mode of action (MoA).