A biodegradable microgrooved and tissue mechanocompatible citrate-based scaffold improves bladder tissue regeneration.

Chronic bladder dysfunction due to bladder disease or trauma is detrimental to affected patients as it can lead to increased risk of upper urinary tract dysfunction. Current treatment options include surgical interventions that enlarge the bladder with autologous bowel tissue to alleviate pressure on the upper urinary tract. This highly invasive procedure, termed bladder augmentation enterocystoplasty (BAE), significantly increases the risk of patient morbidity and mortality due to the incompatibility between bowel and bladder tissue. Therefore, patients would significantly benefit from an alternative treatment strategy that can regenerate healthy tissue and restore overall bladder function. Previous research has demonstrated the potential of citrate-based scaffolds co-seeded with bone marrow-derived stem/progenitor cells as an alternative graft for bladder augmentation. Recognizing that contact guidance can potentially influence tissue regeneration, we hypothesized that microtopographically patterned scaffolds would modulate cell responses and improve overall quality of the regenerated bladder tissue. We fabricated microgrooved (MG) scaffolds using the citrate-based biomaterial poly (1,8-octamethylene-citrate-co-octanol) (POCO) and co-seeded them with human bone marrow-derived mesenchymal stromal cells (MSCs) and CD34+ hematopoietic stem/progenitor cells (HSPCs). MG POCO scaffolds supported MSC and HSPC attachment, and MSC alignment within the microgrooves. All scaffolds were characterized and assessed for bladder tissue regeneration in an established nude rat bladder augmentation model. In all cases, normal physiological function was maintained post-augmentation, even without the presence of stem/progenitor cells. Urodynamic testing at 4-weeks post-augmentation for all experimental groups demonstrated that bladder capacity increased and bladder compliance was normal. Histological evaluation of the regenerated tissue revealed that cell-seeded scaffolds restored normal bladder smooth muscle content and resulted in increased revascularization and peripheral nerve regeneration. The presence of microgrooves on the cell-seeded scaffolds increased microvasculature formation by 20 % and urothelial layer thickness by 25 % in the regenerating tissue. Thus, this work demonstrates that microtopography engineering can influence bladder tissue regeneration to improve overall anatomical structure and re-establish bladder physiology.

Influence of habitat on fine-scale space use by brown lemmings (Lemmus trimucronatus) in the High Arctic.

Space use by small mammals should mirror their immediate needs for food and predator shelters but can also be influenced by seasonal changes in biotic and abiotic factors. Lemmings are keystone species of the tundra food web, but information on their spatial distribution in relation to habitat heterogeneity is still scant, especially at a fine scale. In this study, we used spatially explicit capture-recapture methods to determine how topography, hydrology, vegetation, and soil characteristics influence the fine-scale spatial variations in summer density of brown lemmings (Lemmus trimucronatus). Lemmings were monitored throughout the summer in wet and mesic tundra habitats and in a predator exclusion grid, which was also located in mesic tundra. We found that in wet tundra, lemming densities were higher at sites with a rugged topography dominated by hummocks, but only during snow melt. In both mesic tundra sites, lemming densities were higher in sites with poor drainage and low aspect throughout the summer. We found no clear association between lemming densities and any tested vegetation or soil variables. Overall, hydrology and topography appear to play a dominant role in small-scale space use of brown lemmings with a secondary role for predator avoidance and food plant abundance.

L'utilisation de l'espace par les petits mammifères devrait refléter leurs besoins immédiats de nourriture et de protection des prédateurs, mais elle peut aussi être influencée par des changements saisonniers dans les facteurs biotiques et abiotiques. Les lemmings sont des espèces clés dans le réseau alimentaire de la toundra, pourtant les connaissances sur leur répartition spatiale en relation avec l'hétérogénéité des habitats sont limitées, surtout à fine échelle spatiale. Dans cette étude, nous avons utilisé des méthodes de captures-recaptures spatialement explicites pour déterminer comment la topographie, l'hydrologie, la végétation et les caractéristiques des sols influencent les variations à fine échelle spatiale des densités estivales de lemmings bruns (Lemmus trimucronatus). Les lemmings ont été suivis tout au long de l'été dans des habitats de toundra humide et mésique et dans une grille d'exclusion des prédateurs qui se situait aussi en toundra mésique. Nous avons constaté que dans la toundra humide, les densités de lemmings étaient plus élevées dans les sites avec une topographie accidentée dominée par des hummocks, mais seulement pendant la fonte de la neige en juin. Dans les deux sites en toundra mésique, les densités de lemmings étaient plus élevées là où la pente était faible et le drainage mauvais pendant tout l'été. Nous n'avons trouvé aucun effet des variables végétales ou des sols que nous avons testées. Dans l'ensemble, l'hydrologie et la topographie semblent jouer un rôle prépondérant dans l'utilisation de l'espace par le lemming brun à fine échelle, alors que l'évitement des prédateurs et l'abondance des plantes fourragères auraient un rôle secondaire.

Limited control of microtopography evolution on ground subsidence in polygonal tundra landscapes.

Rapid surface and subsurface changes in the Arctic polygonal tundra landscapes due to the melting of ice wedges, known as thermokarst processes, have significant implications for Arctic ecosystems. However, the integration of thermokarst processes into widely used global climate models for projections poses an important question. Here we use an integrated permafrost thermal hydrology model to explore the decoupled nature of two thermokarst processes - microtopography evolution and ground subsidence - in six Arctic locations. Our study specifically investigates this decoupled nature during the transformation of poorly drained low-centered polygons to well-drained high-centered polygons. Spanning diverse climates in polygonal tundra landscapes under the RCP8.5 climate scenario, our findings reveal small variations in permafrost thaw and ground subsidence rates - 2-10 % and 2-4 %, respectively - with and without the representation of microtopography evolution. This suggests that neglecting surface microtopography and its evolution is unlikely to have significant impacts on permafrost projections, regardless of the climate and location. As a result, we suggest the representation of microtopography in Earth System Models may not be imperative. Disclaimer: Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the view of the U.S. Department of Commerce, National Oceanic and Atmospheric Administration.

Alder expansion stimulates nitrogen oxide (NOx) emissions from southern Eurasian permafrost peatlands.

Nitrogen oxides (NOx) play an important role for atmospheric chemistry and radiative forcing. However, NOx emissions from the vast northern circumpolar permafrost regions have not been studied in situ due to limitations of measurement techniques. Our goals were to validate the offline analytical technique, and based on this, to widely quantify in situ NOx emissions from peatlands in the southern Eurasian permafrost region. To this end, we conducted a comparison of online and offline flux measurements in 2018 and 2019 using the synthetic air flushing, steady-state opaque chamber method. With differences in annual average and cumulative fluxes less than 0.1 µg N m-2 h-1 and 0.01 kg N ha-1 year-1, the online and offline fluxes were in good agreement, demonstrating the feasibility of conducting offline measurements in remote regions without power supply. The flux measurements over 2 years showed obvious NOx emissions of 0.05-0.14 and 0.13-0.30 kg N ha-1 year-1 in the hollow and hummock microtopography of permafrost peatlands, respectively. The rapid expansion of alder (Alnus sibirica) in the peatlands induced by permafrost degradation significantly increased soil mineral N contents and NOx emissions depending on the age of alder (0.64-1.74 and 1.44-2.20 kg N ha-1 year-1 from the alder forests with tree ages of 1-10 years and 11-20 years, respectively). Alder expansion also intensively altered the thermal state of permafrost including the sharp increases of soil temperatures during the non-growing season from October to April and active layer thickness. This study provides the first in situ evidences of NOx emissions from the northern circumpolar permafrost regions and uncovers the well-documented expansion of alders can substantially stimulate NOx emissions and thus, significantly affect air quality, radiative forcing, and ecosystem productivity in the pristine regions.

Effects of Microtopography on Soil Microbial Community Structure and Abundance in Permafrost Peatlands.

Soil microorganisms play crucial roles in the stability of the global carbon pool, particularly in permafrost peatlands that are highly sensitive to climate change. Microtopography is a unique characteristic of peatland ecosystems, but how microtopography affects the microbial community structures and their functions in the soil is only partially known. We characterized the bacterial and fungal community compositions by amplicon sequencing and their abundances via quantitative PCR at different soil depths in three microtopographical positions (hummocks, flats, and hollows) in permafrost peatland of the Greater Xing'an Mountains in China. The results showed that the soil of hummocks displayed a higher microbial diversity compared to hollows. Microtopography exerted a strong influence on bacterial community structure, while both microtopography and soil depth greatly impacted the fungal community structure with variable effects on fungal functional guilds. Soil water content, dissolved organic carbon, total phosphorus, and total nitrogen levels of the soil mostly affected the bacterial and fungal communities. Microtopography generated variations in the soil water content, which was the main driver of the spatial distribution of microbial abundances. This information stressed that the hummock-flat-hollow microtopography of permafrost peatlands creates heterogeneity in soil physicochemical properties and hydrological conditions, thereby influencing soil microbial communities at a microhabitat scale. Our results imply that changes to the water table induced by climate warming inducing permafrost degradation will impact the composition of soil microbes in peatlands and their related biogeochemical functions, eventually providing feedback loops into the global climate system.

Microtopography effects on pedogenesis in the mudstone-derived soils of the hilly mountainous regions.

Topography is a critical factor that determines the characteristics of regional soil formation. Small-scale topographic changes are referred to microtopographies. In hilly mountainous regions, the redistribution of water and soil materials caused by microtopography is the main factor affecting the spatial heterogeneity of soil and the utilization of land resources. In this study, the influence of microtopography on pedogenesis was investigated using soil samples formed from mudstones with lacustrine facies deposition in the middle of the Sichuan Basin. Soil profiles were sampled along the slopes at the summit, shoulder, backslope, footslope, and toeslope positions. The morphological, physicochemical, and geochemical attributes of profiles were analyzed. The results showed that from the summit to the toeslope, soil thickness increased significantly and profile configuration changed from A-C to A-B-C. The total contents of Ca and Na decreased at the summit, backslope, and footslope, while the total contents of Al, Fe and Mg showed an opposite trend. On the summit and shoulder of the hillslope, weathered materials were transported away by gravity and surface erosion, exposing new rocks. As a result, soil development in these areas was relatively weak. In flat areas such as the footslope and toeslope with sufficient water conditions, the addition of weathered components and the prolonged contact between water, soil, and sediment led to further chemical weathering, resulting in highly developed characteristics. Microtopography may influence physicochemical properties, chemical weathering, and redistribution of water and materials, causing variations in pedogenic characteristics at different slope positions.

Dynamic Inhibition of Calcite Dissolution in Flowing Acidic Pb2+ Solutions.

Reactions of mineral surfaces with dissolved metal ions at far-from-equilibrium conditions can deviate significantly from those in near-equilibrium systems due to steep concentration gradients, ion-surface interactions, and reactant transport effects that can lead to emergent behavior. We explored the effect of dissolved Pb2+ on the dissolution rate and topographic evolution of calcite (104) surfaces under far-from-equilibrium acidic conditions (pH 3.7) in a confined single-pass laminar-flow geometry. Operando measurements by digital holographic microscopy were conducted over a range of Pb2+ concentrations ([Pb2+] = 0 to 5 × 10-2 M) and flow velocities (v = 1.67-53.3 mm s-1). Calcite (104) surface dissolution rates decreased with increasing [Pb2+]. The inhibition of dissolution and the emergence of unique topographic features, including micropyramids, variable etch pit shapes, and larger scale topographic patterns, became increasingly apparent at [Pb2+] ≥ 5 × 10-3 M. A better understanding of such dynamic reactivity could be crucial for constructing accurate models of geochemical transport in aqueous carbonate systems.

Single clonal tracking on biomimetic microtextured platforms for real-time guided migration analysis of myeloid-derived suppressor cell dissemination characteristics ex vivo.

Current strategies to undermine the deleterious influence of myeloid-derived suppressor cells (MDSCs) in the tumor microenvironment (TME) are lacking effective clinical solutions, in large part, due to insufficient knowledge on susceptible cellular and molecular targets. We describe here the application of biomimetic microfabricated platforms designed to analyze migratory phenotypes of MDSCs in the tumor niche ex vivo, which may enable accelerated therapeutic discovery. By mimicking the guided structural cues present in the physiological architecture of the TME, aligned microtopography substrates can elucidate potential interventions on migratory phenotypes of MDSCs at the single clonal level. Coupled with cellular and molecular biology analysis tools, our approach employs real-time tracking analysis of cell motility to probe the dissemination characteristics of MDSCs under guided migration conditions. These methods allow us to identify cellular subpopulations of interest based on their disseminative and suppressive capabilities. By doing so, we illustrate the potential of applying microscale engineering tools, in concert with dynamic live cell imaging and bioanalysis methods to uncover novel exploitable motility targets for advancing cancer therapy discovery. The inherent simplicity and extended application to a variety of contexts in tumor-associated cell migration render this method widely accessible to existing biological laboratory conditions and interests.

The influence of microtopography to road inundation caused by extreme flood.

Microtopography plays a critical role in road inundation during urban flood events. The microtopography in this paper was defined as terrain-scale features that encompass surface roughness, slope, road network and urban building layout. This paper aims to explore the mechanism of depression storage and road inundation under different microtopography. Simulations under 4 rainfall intensities (144.0- 182.88 mm/h) and 14 slope combinations (four transverse slope and five longitudinal slope) were implemented in an 800 by 70 cm local model. The correlation heat map directly reflected that longitudinal slope had higher influence on drainage than other factors. Then real topographical and hydrological data was applied to predict road inundation with five different extreme rainfall events in Jiangning District (Nanjing City, China). The microtopography characteristics of frequent inundation road were extracted, which further verified the conclusions of the local model. Results show that: the microtopography depressions drainage process could be divided into six main stages: filling stage, interaction stage, unstable drainage stage, stable flow stage, drainage stage and stage of drainage end. Water was stored on depressions of road, and the storage volume and discharge efficiency were affected by the surface relief and slope. The emergence of slope provided an altered path and power for water drainage. Only 0.3 % slope could contribute a 28.4 % to discharge efficiency. Upon comparation, the best combination for drainage was 2.0 % transverse slope with 3.0 % longitudinal slope. These findings provided meaningful insights and perspectives for urban flood hazard mitigation and were a more detailed reference for road design.

Anisotropic microtopography surface of chitosan scaffold regulating skin precursor-derived Schwann cells towards repair phenotype promotes neural regeneration.

For repairing peripheral nerve and spinal cord defects, biomaterial scaffold-based cell-therapy was emerged as an effective strategy, requiring the positive response of seed cells to biomaterial substrate and environment signals. Previous work highlighted that the imposed surface properties of scaffold could provide important guidance cues to adhered cells for polarization. However, the insufficiency of native Schwann cells and unclear cellular response mechanisms remained to be addressed. Given that, this study aimed to illuminate the micropatterned chitosan-film action on the rat skin precursor-derived Schwann cells (SKP-SCs). Chitosan-film with different ridge/groove size was fabricated and applied for the SKP-SCs induction. Results indicated that SKP-SCs cultured on 30 µm size microgroove surface showed better oriented alignment phenotype. Induced SKP-SCs presented similar genic phenotype as repair Schwann cells, increasing expression of c-Jun, neural cell adhesion molecule, and neurotrophic receptor p75. Moreover, SKP-SC-secretome was subjected to cytokine array GS67 assay, data indicated the regulation of paracrine phenotype, a panel of cytokines was verified up-regulated at secreted level and gene expression level in induced SKP-SCs. These up-regulated cytokines exhibit a series of promotive neural regeneration functions, including cell survival, cell migration, cell proliferation, angiogenesis, axon growth, and cellular organization etc. through bioinformatics analysis. Furthermore, the effectively polarized SKP-SCs-sourced secretome, promoted the proliferation and migration capacity of the primarily cultured native rat Schwann cells, and augmented neurites growth of the cultured motoneurons, as well as boosted axonal regrowth of the axotomy-injured motoneurons. Taken together, SKP-SCs obtained pro-neuroregeneration phenotype in adaptive response to the anisotropic topography surface of chitosan-film, displayed the oriented parallel growth, the transition towards repair Schwann cell genic phenotype, and the enhanced paracrine effect on neural regeneration. This study provided novel insights into the potency of anisotropic microtopography surface to Schwann-like cells phenotype regulation, that facilitating to provide promising engineered cell-scaffold in neural injury therapies.

Micro- and Nano-Roughness Separation Based on Fractal Analysis.

When describing the tribological behaviour of technical surfaces, the need for full-length scale microtopographic characterization often arises. The self-affine of surfaces and the characterisation of self-affine using a fractal dimension and its implantation into tribological models are commonly used. The goal of our present work was to determine the frequency range of fractal behaviour of surfaces by analysing the microtopographic measurements of an anodised aluminium brake plunger. We also wanted to know if bifractal and multifractal behaviour can be detected in real machine parts. As a result, we developed a new methodology for determining the fractal range boundaries to separate the nano- and micro-roughness. To reach our goals, we used an atomic force microscope (AFM) and a stylus instrument to obtain measurements in a wide frequency range (19 nm-3 mm). Power spectral density (PSD)-based fractal evaluation found that the examined surface could not be characterised by a single fractal dimension. A new method capable of separating nano- and micro-roughness has been developed for investigating multifractal behaviour. The presented procedure separates nano- and micro-roughness based on the geometric characteristics of surfaces. In this way, it becomes possible to specifically examine the relationship between the micro-geometry that can be measured in each wavelength range and the effects of cutting technology and the material structure that creates them.

A bioartificial and vasculomorphic bone matrix-based organoid mimicking microanatomy of flat and short bones.

We engineered an in vitro model of bioartificial 3D bone organoid consistent with an anatomical and vascular microenvironment common to mammalian flat and short bones. To achieve this, we chose the decellularized-decalcified matrix of the adult male rat scapula, implemented with the reconstruction of its intrinsic vessels, obtained through an original intravascular perfusion with polylevolactic (PLLA), followed by coating of the PLLA-fabricated vascularization with rat tail collagen. As a result, the 3D bone and vascular geometry of the native bone cortical and cancellous compartments was reproduced, and the rat tail collagen-PLLA biomaterial could in vitro act as a surrogate of the perivascular extracellular matrix (ECM) around the wall of the biomaterial-reconstituted cancellous vessels. As a proof-of-concept of cell compatibility and site-dependent osteoinductive properties of this bioartificial 3D construct, we show that it in vitro leads to a time-dependent microtopographic positioning of rat mesenchymal stromal cells (MSCs), initiating an osteogenic fate in relation to the bone compartment. In addition, coating of PLLA-reconstructed vessels with rat tail collagen favored perivascular attachment and survival of MSC-like cells (mouse embryonic fibroblasts), confirming its potentiality as a perivascular stroma for triggering competence of seeded MSCs. Finally, in vivo radiographic topography of bone lesions in the human jaw and foot tarsus of subjects with primary osteoporosis revealed selective bone cortical versus cancellous involvement, suggesting usefulness of a human 3D bone organoid engineered with the same principles of our rat organoid, to in vitro investigate compartment-dependent activities of human MSC in flat and short bones under experimental osteoporotic challenge. We conclude that our 3D bioartificial construct offers a reliable replica of flat and short bones microanatomy, and promises to help in building a compartment-dependent mechanistic perspective of bone remodeling, including the microtopographic dysregulation of osteoporosis.

Drone-based assessment of microsite-scale hydrological processes promoted by restoration actions in early post-mining ecological restoration stages.

A successful choice of post-mining restoration activities in dry climates may depend on relevant features related to topographic characteristics, hydrological processes and vegetation development, which will determine functional recovery in these ecosystems. The combination of different restoration techniques to reestablish vegetation, such as sowing and plantation, implies the interspersion of bare-soil areas with vegetated areas in early plant development stages, which may result in an associated mosaic of hydrologic functioning. In this study, we conducted a drone-based assessment to disentangle the role played by microsite-scale hydrological processes (i.e., planting hole slope, sink volume capacity, individual catchment area, Flow Length Index) promoted by restoration actions in soil protection and vegetation development on the hillside scale. Based on two contrasting restoration scenarios (Steep hillside and Smooth hillside), the different applied restoration treatments conditioned the microtopographic processes on the planting hole scale and, therefore, resource redistribution. The main results showed higher planting hole functionality on the smooth hillsides than on steep hillside, which resulted in greater water availability and bigger vegetation patches. By addressing the role of hydrological processes on the microsite scale, our study contributes substantially to prior knowledge on the relevant factors for ecosystem development and post-mining restoration success. It also demonstrates that high-resolution drone images can be a very useful tool for monitoring restoration actions, especially in large, inaccessible and unstable restored areas.

Comparative Study on Micro-Grinding Performance of 2.5D Cf/SiCs, 2.5D SiCf/SiCs, and SiC Ceramics.

To investigate the micro-grinding process and performance of 2.5D Cf/SiC composites and 2.5D SiCf/SiC composites in depth, single-factor micro-grinding experiments were conducted by using SiC ceramics as a comparison. Differences in the material removal process, surface microstructure, surface roughness, and grinding force of the three materials under the same grinding parameters were comparatively analyzed. The results indicate that crack propagation is severe during the micro-grinding process of SiC ceramics. The ground surface is uneven, accompanied by pit defects and large surface roughness Ra. However, the presence of reinforcing fibers and interfaces in the two types of composites can inhibit crack propagation or change their extension directions. Therefore, their surfaces are smooth and flat after grinding, with small defects and low surface roughness Ra. In addition, the grinding processes of the two composites are both related to fiber orientation. There are differences in crack propagation paths and fiber fracture positions in the weft fiber layer and the radial fiber layer, which result in different forms of grinding defects. During micro-grinding, the real-time force signals of 2.5D Cf/SiC composites and 2.5D SiCf/SiC composites are relatively stable, while the signals of SiC ceramics have a large number of spikes. The average micro-grinding force of the three materials is: SiC ceramics > 2.5D SiCf/SiC composites > 2.5D Cf/SiC composites.

A Micro-Topography Measurement and Compensation Method for the Key Component Surface Based on White-Light Interferometry.

The grinding grooves of material removal machining and the residues of a machining tool on the key component surface cause surface stress concentration. Thus, it is critical to carry out precise measurements on the key component surface to evaluate the stress concentration. Based on white-light interferometry (WLI), we studied the measurement distortion caused by the reflected light from the steep side of the grinding groove being unable to return to the optical system for imaging. A threshold value was set to eliminate the distorted measurement points, and the cubic spline algorithm was used to interpolate the eliminated points for compensation. The compensation result agrees well with the atomic force microscope (AFM) measurement result. However, for residues on the surface, a practical method was established to obtain a microscopic 3D micro-topography point cloud and a super-depth-of-field fusion image simultaneously. Afterward, the semantic segmentation network U-net was adopted to identify the residues in the super-depth-of-field fusion image and achieved a recognition accuracy of 91.06% for residual identification. Residual feature information, including height, position, and size, was obtained by integrating the information from point clouds and super-depth-of-field fusion images. This work can provide foundational data to study surface stress concentration.

Towards modular engineering of cell signalling: Topographically-textured microparticles induce osteogenesis via activation of canonical hedgehog signalling.

Polymer microparticles possess great potential as functional building blocks for advanced bottom-up engineering of complex tissues. Tailoring the three-dimensional architectural features of culture substrates has been shown to induce osteogenesis in mesenchymal stem cells in vitro, but the molecular mechanisms underpinning this remain unclear. This study proposes a mechanism linking the activation of Hedgehog signalling to the osteoinductive effect of surface-engineered, topographically-textured polymeric microparticles. In this study, mesenchymal progenitor C3H10T1/2 cells were cultured on smooth and dimpled poly(D,l-lactide) microparticles to assess differences in viability, cellular morphology, proliferation, and expression of a range of Hedgehog signalling components and osteogenesis-related genes. Dimpled microparticles induced osteogenesis and activated the Hedgehog signalling pathway relative to smooth microparticles and 2D-cultured controls without the addition of exogenous biochemical factors. We observed upregulation of the osteogenesis markers Runt-related transcription factor2 (Runx2) and bone gamma-carboxyglutamate protein 2 (Bglap2), as well as the Hedgehog signalling components, glioma associated oncogene homolog 1 (Gli1), Patched1 (Ptch1), and Smoothened (Smo). Treatment with the Smo antagonist KAAD-cyclopamine confirmed the involvement of Smo in Gli1 target gene activation, with a significant reduction in the expression of Gli1, Runx2 and Bglap2 (p ≤ 0.001) following KAAD-cyclopamine treatment. Overall, our study demonstrates the role of the topographical microenvironment in the modulation of Hedgehog signalling, highlighting the potential for tailoring substrate topographical design to offer cell-instructive 3D microenvironments. Topographically-textured microparticles allow the modulation of Hedgehog signalling in vitro without adding exogenous biochemical agonists, thereby eliminating potential confounding artefacts in high-throughput drug screening applications.

Mechanical and Surface Characteristics of Selective Laser Melting-Manufactured Dental Prostheses in Different Processing Stages.

Due to the expansion of the use of powder bed fusion metal additive technologies in the medical field, especially for the realization of dental prostheses, in this paper, the authors propose a comparative experimental study of the mechanical characteristics and the state of their microscale surfaces. The comparison was made from material considerations starting from two dental alloys commonly used to realize dental prostheses: Ni-Cr and Co-Cr, but also technologies for obtaining selective laser melting (SLM) and conventional casting. In addition, to compare the performances with the classical casting technology, for the dental prostheses obtained through SLM, the post-processing stage in which they are in a preliminary finishing and polished state was considered. Therefore, for the determination of important mechanical characteristics and the comparative study of dental prostheses, the indentation test was used, after which the hardness, penetration depths (maximum, permanent, and contact depth), contact stiffness, and contact surface were established, and for the determination of the microtopography of the surfaces, atomic force microscopy (AFM) was used, obtaining the local areal roughness parameters at the miniaturized scale-surface average roughness, root-mean-square roughness (RMS), and peak-to-peak values. Following the research carried out, several interesting conclusions were drawn, and the superiority of the SLM technology over the classic casting method for the production of dental prostheses in terms of some mechanical properties was highlighted. At the same time, the degree of finishing of dental prostheses made by SLM has a significant impact on the mechanical characteristics and especially the local roughness parameters on a miniaturized scale, and if we consider the same degree of finishing, no major differences are observed in the roughness parameters of the surfaces of the prostheses produced by different technologies.

Synergistic effects of succession and microtopography of moraine on the fungal spatial diversity in a glacier forefield.

Primary succession and microtopography result in environmental changes and are important processes influencing the community assembly of soil fungi in the Arctic region. In glacier forefields that contain a series of moraine ridges, both processes contribute synchronously to fungal spatial diversity. To reveal the synergistic effects of succession and microtopography, we investigated the fungal community structure and environmental variables in the moraines of the Arklio Glacier, Ellesmere Island. The study sites were established at four locations from the top to the bottom of the ridge slope within each of the three moraine ridges of different post-glacial ages. The location-dependent community composition was equally diverse in both the initial and later stages of succession, suggesting that successional time could alter the effects of microtopography on the fungal community. Moreover, our results suggest that fungal communities at different locations follow different successional trajectories, even if they have passed through the same time lapse. Such a synergistic effect of succession and microtopography of moraines does not allow for parallel changes in fungal communities among moraines or among locations, suggesting that the moraine series contributes substantially to fungal spatial diversity in the glacier forefield.

Effect of Long-Term Aging on Fatigue and Thermal Cracking Performance of Polyphosphoric Acid and Styrene-Butadiene-Styrene-Modified Bio-Blend Bitumen.

Polyphosphoric acid (PPA) and styrene-butadiene-styrene (SBS) were adopted to produce PPA-SBS-modified bio-blend bitumen, which achieved excellent mechanical performance. However, its long-range performance, such as the fatigue and thermal cracking behavior under long-term thermal oxidation, is not well understood. Therefore, a pressure aging vessel (PAV) system was applied to simulate the aging behavior of the bitumen under the action of thermal oxidation. Then, a linear amplitude sweep (LAS) test combined with a viscoelastic continuum damage (VECD) model was applied to investigate the fatigue properties of the bitumen. Moreover, a bending beam rheometer (BBR) test was conducted to evaluate the thermal cracking resistance of the bitumen before and after PAV aging. Meanwhile, an atomic force microscope (AFM) was applied to observe the microscopic topography. The results show that the original compound-modified bitumen can bear more fatigue damage than that of the control bitumen at the failure point, and it also has excellent fatigue resistance at 2.5%, 5%, 7.5%, and 10% applied strain. Moreover, the VECD model can accurately predict the fatigue life of the bitumen under different applied strains. The variation ratio of stiffness modulus for the compound-modified bitumen is below that of the control bitumen after PAV aging, so it shows a better anti-aging performance. Finally, the AFM test shows that PPA and bio-bitumen decrease the heterogeneity of the bitumen, reducing the difference between phases.

In vivo transmission electron microscopy of the alternating structure of the protrusions between adjacent macrophage-like cells on micropatterns.

OBJECTIVES: We investigated the behavior of macrophages in the defined microtopography of materials. METHODS: Patterned cyclo-olefin polymer films were implanted into the femurs of seven-week-old rats. After 1 and 4 weeks, the rats were fixed with glutaraldehyde and OsO4, and their bones were observed with transmission electron microscopy (TEM). RESULTS: TEM and segmentation revealed an alternating structure in which multiple protrusions of adjacent macrophage-like cells overlapped. They were approximately 2 µm long and almost uniform in width, and were induced by the limited topography. CONCLUSION: New structures appeared between the macrophage-like cells as a result of microtopography.