Intradermal Delivery of Calcium Hydroxylapatite With Fractionated Ablation.

OBJECTIVES: The absorption of biostimulatory particulate matter following its application to fractional skin defects remains poorly understood, and even less is known about its in vivo impact in terms of tissue integration. The objectives of this study are twofold: (1) to evaluate the potential of calcium hydroxylapatite (CaHA) to penetrate through skin treated with a fractional laser; and (2) to assess the effectiveness of clinical laser scanning microscopy technologies in monitoring the effects of such treatment over time. METHODS: One area on a volunteer's arm was treated with a fractional erbium laser (Sciton Inc., Palo Alto, CA), while a second area received the same laser treatment followed by CaHA topical application. We used reflectance confocal microscopy (RCM) and multiphoton microscopy (MPM) to noninvasively image beneath the surface of the treated skin to study and monitor the effects of these treatments within 1 h of treatment and at four additional time points over a 6-week period. RESULTS: One hour posttreatment, at different depths beneath the skin surface, MPM and RCM provided similar visualizations of laser-induced channels. In skin treated by both laser and CaHA, these two imaging methods provided complementary information. RCM captured the lateral and depth distribution of CaHA microspheres and were seen as bright spheres as they became incorporated into the healing tissue. MPM, meanwhile, visualized the CaHA microparticles as dark shadow spheres within the laser-induced channels and encroaching healing tissue. Furthermore, MPM provided critical information about collagen regeneration around the microspheres, with the collagen visually marked by its distinct second harmonic generation (SHG) signal. CONCLUSIONS: This observational pilot study demonstrates that CaHA, a collagen stimulator used as a dermal filler, can not only be inserted into the dermis after fractional laser treatment but remains in the healing skin for at least 6 weeks posttreatment. The noninvasive imaging techniques RCM and MPM successfully captured the presence of CaHA microspheres mid-dermis during the healing phase. They also demonstrated new collagen production around the microspheres, highlighting the effectiveness of these imaging approaches in monitoring such treatment over time.

Harnessing Metal-Organic Frameworks for NIR-II Light-Driven Multiphoton Photocatalytic Water Splitting in Hydrogen Therapy.

The construction of near-infrared (NIR) light-activated hydrogen-producing materials that enable the controlled generation and high-concentration release of hydrogen molecules in deep tumor tissues and enhance the effects of hydrogen therapy holds significant scientific importance. To address the key technical challenge of low-efficiency oxidation-reduction reactions for narrow-bandgap photocatalytic materials, this work proposes an innovative approach for the controllable fabrication of multiphoton photocatalytic materials to overcome the limitations imposed by traditional near-infrared photocatalysts with "narrow-bandgap" constraints. Herein, an NIR-responsive multiphoton photocatalyst, ZrTc-Co, is developed by utilizing a post-synthetic coordination modification strategy to introduce hydrogenation active site CoII into a multiphoton responsive MOF (ZrTc). The results reveal that with the introduction of the CoII site, electron-hole recombination can be efficiently suppressed, thus promoting the efficiency of hydrogen evolution reaction. In addition, the integration of CoII can effectively enhance charge transfer and improve static hyperpolarizability, which endows ZrTc-Co with excellent multiphoton absorption. Moreover, hyaluronic acid modification endows ZrTc-Co with cancer cell-specific targeting characteristics, laying the foundation for tumor-specific elimination. Collectively, the proposed findings present a strategy for constructing NIR-II light-mediated hydrogen therapeutic agents for deep tumor elimination.

Bone turnover markers in the preoperative assessment of bone quality - A prospective investigation of bone microstructure and advanced glycation endproducts in lumbar fusion patients.

INTRODUCTION: Effective tools to evaluate bone quality preoperatively are scarce and the standard method to determine bone quality requires an invasive biopsy. A non-invasive, and preoperatively available method for bone quality assessment would be of clinical value. The purpose of this study is to investigate the associations of bone formation marker, serum bone alkaline phosphatase (BAP), and bone resorption marker, urine collagen cross-linked N-telopeptide (uNTX) to volumetric bone mineral density (vBMD), fluorescent advanced glycation endproducts (fAGEs) and bone microstructure. MATERIALS AND METHODS: A cross-secional analysis using prospective data of patients undergoing lumbar spinal fusion was performed. BAP and uNTX were preoperatively collected. Quantitative computed tomography (QCT) was performed at the lumbar spine (vBMD ≤ 120 mg/cm3 osteopenic/osteoporotic). Bone biopsies from the posterior superior iliac spine were obtained and evaluated with multiphoton fluorescence microscopy for fAGEs and microcomputed tomography (µCT) for bone microarchitecture. Correlations between BAP/uNTX to vBMD, fAGEs and µCT parameters were assessed with Spearman's ρ. Receiver operating characteristic (ROC) analysis evaluated BAP and uNTX as predictors for osteopenia/osteoporosis. Multivariable linear regression models adjusting for age, sex, BMI, race and diabetes mellitus determined associations between BAP/uNTX and fAGEs. RESULTS: 127 prospectively enrolled patients (50.4% female, 62.5 years, BMI 28.7 kg/m2) were analyzed. uNTX (ρ=-0.331,p < 0.005) and BAP (ρ=-0.245,p < 0.025) decreased with cortical fAGEs, and uNTX (ρ=-0.380,p < 0.001) decreased with trabecular fAGEs. BAP and uNTX revealed no significant correlation with vBMD. ROC analysis for BAP and uNTX discriminated osteopenia/osteoporosis with AUC of 0.477 and 0.561, respectively. In the multivariable analysis, uNTX decreased with increasing trabecular fAGEs after adjusting for covariates (ß = 0.923;p = 0.031). CONCLUSION: This study demonstrated an inverse association of bone turnover markers and fAGEs. Both uNTX and BAP could not predict osteopenia/osteoporosis in the spine. uNTX reflects collagen characteristics and might have a complementary role to vBMD, as a non-invasive tool for bone quality assessment in spine surgery.

Perovskites as Multiphoton Fluorescence Contrast Agents for In Vivo Imaging.

Multiphoton fluorescence microscopy is a powerful tool for imaging and exploring biological tissue at subcellular spatial resolution while minimizing photobleaching and autofluorescence. For optimal performance in multiphoton microscopy, materials exhibiting a large multiphoton absorption cross section (σn) and fluorescence quantum yield are desired. Notably, perovskite nanocrystals (CsPbX3, PNCs) exhibit exceptionally large two-, three-, up to five photon absorption cross section (σ2 ∼ 106 GM, σ3 ∼ 10-73 cm6s2 photon-2, σ5 ∼ 10-136 cm10s4 photon-4), along with near unity fluorescence quantum yield, making them desirable for deep tissue applications. Here, we employed PNCs as contrast agents to image mesenchymal stromal cells in a living mouse. The PNCs were stabilized by encapsulating them in a SiO2 matrix (∼60-70 nm in diameter), offering versatility for subsequent surface modification to target specific biological entities for both diagnostic and therapeutic applications. Multiphoton imaging of PNCs offers substantial benefits for dynamic tracking of cells in deep tissue, such as in understanding immune cell migration and other biological processes in both healthy and diseased tissues.

Using Multiphoton Intravital Microscopy to Study Neutrophil Transmigration and Blood-Brain Barrier Permeability in a Mouse Model of Herpes Simplex Virus Encephalitis.

Multiphoton intravital microscopy (MP-IVM) is an imaging technique used for the observation of living organisms at a microscopic resolution. The tissue of interest is exposed through a window allowing imaging of cells in real time. Using MP-IVM, the temporospatial kinetics of leukocyte transendothelial migration can be visualized and quantitated using reporter mice and cell-specific fluorophore-conjugated monoclonal antibodies to track the leukocytes within and outside of vascular beds. Here we describe a method used to study neutrophil transendothelial migration and blood-brain barrier permeability in a mouse model of herpes simplex virus I (HSV) encephalitis.

Modifying Parallel Excitations into One Framework for C(sp3)─H Bond Activation with Energy Combined More Than Two Photons.

Natural photosynthesis enzymes utilize energies of several photons for challenging oxidation of water, whereas artificial photo-catalysis typically involves only single-photon excitation. Herein, a multiphoton excitation strategy is reported that combines parallel photo-excitations with a photoinduced electron transfer process for the activation of C(sp3)─H bonds, including methane. The metal-organic framework Fe3-MOF is designed to consolidate 4,4',4″-nitrilotrisbenzoic units for the photoactivation of dioxygen and trinuclear iron clusters as the HAT precursor for photoactivating alkanes. Under visible light irradiation, the dyes and iron clusters absorbed parallel photons simultaneously to reach their excited states, respectively, generating 1O2 via energy transfer and chlorine radical via ligand-to-metal charge transfer. The further excitation of organic dyes leads to the reduction of 1O2 into O2 •- through a photoinduced electron transfer, guaranteeing an extra multiphoton oxygen activation manner. The chlorine radical abstracts a hydrogen atom from alkanes, generating the carbon radical for further oxidation transformation. Accordingly, the total oxidation conversion of alkane utilizing three photoexcitation processes combines the energies of more than two photons. This new platform synergistically combines a consecutive excited photoredox organic dye and a HAT catalyst to combine the energies of more than two photons, providing a promising multiphoton catalysis strategy under energy saving, and high efficiency.

Imaging of colorectal adenomas with pseudoinvasion and malignant polyps using two-photon excitation microscopy.

Introduction: Although the incidence and mortality rates of colorectal cancer exhibit significant variability, it remains one of the most prevalent cancers worldwide. Endeavors to prevent colorectal cancer development focus on detecting precursor lesions during colonoscopy. The diagnosis of endoscopically resected polyps relies on hematoxylin and eosin staining examination. For challenging cases like adenomatous polyps with epithelial misplacement, additional diagnostic methods could prove beneficial. Methods: This paper aims to underscore stromal changes observed in malignant polyps and polyps with pseudoinvasion, leveraging two-photon excitation microscopy (TPEM), a technique extensively employed in the medical field in recent years. Results and discussions: Both the subjective and quantitative analysis of TPEM images revealed distinct distributions and densities of collagen at the invasion front in malignant polyps compared to areas of pseudoinvasion. TPEM holds potential in discerning true invasion in malignant polyps from pseudoinvasion, offering enhanced visualization of local stromal changes.

Label-Free Monitoring of Endometrial Cancer Progression Using Multiphoton Microscopy.

Endometrial cancer is the most common gynecological cancer in the developed world. However, the accuracy of current diagnostic methods is still unsatisfactory and time-consuming. Here, we presented an alternate approach to monitoring the progression of endometrial cancer via multiphoton microscopy imaging and analysis of collagen, which is often overlooked in current endometrial cancer diagnosis protocols but can offer a crucial signature in cancer biology. Multiphoton microscopy (MPM) based on the second-harmonic generation and two-photon excited fluorescence was introduced to visualize the microenvironment of endometrium in normal, hyperplasia without atypia, atypical hyperplasia, and endometrial cancer specimens. Furthermore, automatic image analysis based on the MPM image processing algorithm was used to quantify the differences in the collagen morphological features among them. MPM enables the visualization of the morphological details and alterations of the glands in the development process of endometrial cancer, including irregular changes in the structure of the gland, increased ratio of the gland to the interstitium, and atypical changes in the glandular epithelial cells. Moreover, the destructed basement membrane caused by gland proliferation and fusion is clearly shown in SHG images, which is a key feature for identifying endometrial cancer progression. Quantitative analysis reveals that the formation of endometrial cancer is accompanied by an increase in collagen fiber length and width, a progressive linearization and loosening of interstitial collagen, and a more random arrangement of interstitial collagen. Observation and quantitative analysis of interstitial collagen provide invaluable information in monitoring the progression of endometrial cancer. Label-free multiphoton imaging reported here has the potential to become an in situ histological tool for effective and accurate early diagnosis and detection of malignant lesions in endometrial cancer.

Dependence of Ultrafast Electron Emission Characteristics of Graphene Cold Cathode on Femtosecond Photoexcitation Polarization Angle.

Ultrafast electron pulses, generated through femtosecond photoexcitation in nanocathode materials, introduce high-frequency characteristics and ultrahigh temporal-spatial resolution to vacuum micro-nano electronic devices. To advance the development of ultrafast electron sources sensitive to polarized light, we propose an ultrafast pulsed electron source based on a vertical few-layer graphene cold cathode. This source exhibits selective electron emission properties for varying polarization angles, with high switching ratios of 277 (at 0°) and 235 (at 90°). The electron emission of the graphene evolves from cosine to sine as the polarization angle increases from 0° to 90°. The variation of electron emission current with polarization angle is intrinsically related to light absorption, local field enhancement, and photothermal conversion efficiency. A physical mechanism model and semiempirical expression were presented to reveal the MPP and PTE mechanisms at different polarization angles. This tunable conversion between mechanisms indicates potential applications in tunable ultrafast optoelectronic devices.

A 3D micro-printed single cell micro-niche with asymmetric niche signals - An in vitro model for asymmetric cell division study.

Intricate microenvironment signals orchestrate to affect cell behavior and fate during tissue morphogenesis. However, the underlying mechanisms on how specific local niche signals influence cell behavior and fate are not fully understood, owing to the lack of in vitro platform able to precisely, quantitatively, spatially, and independently manipulate individual niche signals. Here, microarrays of protein-based 3D single cell micro-niche (3D-SCµN), with precisely engineered biophysical and biochemical niche signals, are micro-printed by a multiphoton microfabrication and micropatterning technology. Mouse embryonic stem cell (mESC) is used as the model cell to study how local niche signals affect stem cell behavior and fate. By precisely engineering the internal microstructures of the 3D SCµNs, we demonstrate that the cell division direction can be controlled by the biophysical niche signals, in a cell shape-independent manner. After confining the cell division direction to a dominating axis, single mESCs are exposed to asymmetric biochemical niche signals, specifically, cell-cell adhesion molecule on one side and extracellular matrix on the other side. We demonstrate that, symmetry-breaking (asymmetric) niche signals successfully trigger cell polarity formation and bias the orientation of asymmetric cell division, the mitosis process resulting in two daughter cells with differential fates, in mESCs.

Precise Serial Microregistration Enables Quantitative Microscopy Imaging Tracking of Human Skin Cells In Vivo.

We developed an automated microregistration method that enables repeated in vivo skin microscopy imaging of the same tissue microlocation and specific cells over a long period of days and weeks with unprecedented precision. Applying this method in conjunction with an in vivo multimodality multiphoton microscope, the behavior of human skin cells such as cell proliferation, melanin upward migration, blood flow dynamics, and epidermal thickness adaptation can be recorded over time, facilitating quantitative cellular dynamics analysis. We demonstrated the usefulness of this method in a skin biology study by successfully monitoring skin cellular responses for a period of two weeks following an acute exposure to ultraviolet light.

Accessing the Low-Polar Molecular Composition of Boreal and Arctic Peat-Burning Organic Aerosol via Thermal Analysis and Ultrahigh-Resolution Mass Spectrometry: Structural Motifs and Their Formation.

Peatland fires emit organic carbon-rich particulate matter into the atmosphere. Boreal and Arctic peatlands are becoming more vulnerable to wildfires, resulting in a need for better understanding of the emissions of these special fires. Extractable, nonpolar, and low-polar organic aerosol species emitted from laboratory-based boreal and Arctic peat-burning experiments are analyzed by direct-infusion atmospheric pressure photoionization (APPI) ultrahigh-resolution mass spectrometry (UHRMS) and compared to time-resolved APPI UHRMS evolved gas analysis from the thermal analysis of peat under inert nitrogen (pyrolysis) and oxidative atmosphere. The chemical composition is characterized on a molecular level, revealing abundant aromatic compounds that partially contain oxygen, nitrogen, or sulfur and are formed at characteristic temperatures. Two main structural motifs are identified, single core and multicore, and their temperature-dependent formation is assigned to the thermal degradation of the lignocellulose building blocks and other parts of peat.

In vivo organoid growth monitoring by stimulated Raman histology.

Patient-derived tumor organoids have emerged as a crucial tool for assessing the efficacy of chemotherapy and conducting preclinical drug screenings. However, the conventional histological investigation of these organoids necessitates their devitalization through fixation and slicing, limiting their utility to a single-time analysis. Here, we use stimulated Raman histology (SRH) to demonstrate non-destructive, label-free virtual staining of 3D organoids, while preserving their viability and growth. This novel approach provides contrast similar to conventional staining methods, allowing for the continuous monitoring of organoids over time. Our results demonstrate that SRH transforms organoids from one-time use products into repeatable models, facilitating the efficient selection of effective drug combinations. This advancement holds promise for personalized cancer treatment, allowing for the dynamic assessment and optimization of chemotherapy treatments in patient-specific contexts.

A three-dimensional valve-on-chip microphysiological system implicates cell cycle progression, cholesterol metabolism and protein homeostasis in early calcific aortic valve disease progression.

BACKGROUND: Calcific aortic valve disease (CAVD) is one of the most common forms of valvulopathy, with a 50 % elevated risk of a fatal cardiovascular event, and greater than 15,000 annual deaths in North America alone. The treatment standard is valve replacement as early diagnostic, mitigation, and drug strategies remain underdeveloped. The development of early diagnostic and therapeutic strategies requires the fabrication of effective in vitro valve mimetic models to elucidate early CAVD mechanisms. METHODS: In this study, we developed a multilayered physiologically relevant 3D valve-on-chip (VOC) system that incorporated aortic valve mimetic extracellular matrix (ECM), porcine aortic valve interstitial cell (VIC) and endothelial cell (VEC) co-culture and dynamic mechanical stimuli. Collagen and glycosaminoglycan (GAG) based hydrogels were assembled in a bilayer to mimic healthy or diseased compositions of the native fibrosa and spongiosa. Multiphoton imaging and proteomic analysis of healthy and diseased VOCs were performed. RESULTS: Collagen-based bilayered hydrogel maintained the phenotype of the VICs. Proteins related to cellular processes like cell cycle progression, cholesterol biosynthesis, and protein homeostasis were found to be significantly altered and correlated with changes in cell metabolism in diseased VOCs. This study suggested that diseased VOCs may represent an early, adaptive disease initiation stage, which was corroborated by human aortic valve proteomic assessment. CONCLUSIONS: In this study, we developed a collagen-based bilayered hydrogel to mimic healthy or diseased compositions of the native fibrosa and spongiosa layers. When the gels were assembled in a VOC with VECs and VICs, the diseased VOCs revealed key insights about the CAVD initiation process. STATEMENT OF SIGNIFICANCE: Calcific aortic valve disease (CAVD) elevates the risk of death due to cardiovascular pathophysiology by 50 %, however, prevention and mitigation strategies are lacking, clinically. Developing tools to assess early disease would significantly aid in the prevention of disease and in the development of therapeutics. Previously, studies have utilized collagen and glycosaminoglycan-based hydrogels for valve cell co-cultures, valve cell co-cultures in dynamic environments, and inorganic polymer-based multilayered hydrogels; however, these approaches have not been combined to make a physiologically relevant model for CAVD studies. We fabricated a bi-layered hydrogel that closely mimics the aortic valve and used it for valve cell co-culture in a dynamic platform to gain mechanistic insights into the CAVD initiation process using proteomic and multiphoton imaging assessment.

Ultrafast Laser 3D Nanolithography of Fiber-Integrated Silica Microdevices.

Fiber-integrated micro/nanostructures play a crucial role in modern industry, mainly owing to their compact size, high sensitivity, and resistance to electromagnetic interference. However, the three-dimensional manufacturing of fiber-tip functional structures beyond organic polymers remains challenging. It is essential to construct fiber-integrated inorganic silica with designed functional nanostructures for microsystem applications. Here, we develop a strategy for the 3D nanolithography of fiber-integrated silica from hybrid organic-inorganic materials by ultrafast laser-induced multiphoton absorption. Without silica nanoparticles and polymer additives, the acrylate-functionalized precursors can be locally cross-linked through a nonlinear effect. Followed by annealing at low temperature, the as-printed micro/nanostructures are transformed to high-quality silica with sub-100 nm resolution. Silica microcantilever probes and microtoroid resonators are directly integrated onto the optical fiber, showing strong thermal stability and quality factors. This work provides a promising strategy for fabricating desired fiber-tip silica micro/nanostructures, which is helpful for the development of integrated functional device applications.

Multiphoton simultaneous multislice imaging.

PURPOSE: To develop multiphoton excitation techniques for simultaneous multislice (SMS) imaging and evaluate their performance and specific absorption rate (SAR) benefit. To improve multiphoton SMS reconstruction quality with a novel CAIPIRINHA (controlled aliasing in parallel imaging results in higher acceleration) design. THEORY AND METHODS: When a conventional single-slice RF field is applied together with an oscillating gradient field, the two can combine to generate multiphoton excitation at multiple discrete spatial locations. Because the conventional RF is reused at multiple spatial locations, multiphoton excitation offers reduced SAR for SMS applications. CAIPIRINHA shifts are often used to improve parallel-imaging acceleration. Interestingly, CAIPIRINHA-type shifts can be obtained for multiphoton SMS by updating the oscillating gradient phase at every phase encode. In this work, both a gradient-echo and a spin-echo sequence with multiphoton CAIPIRINHA-SMS excitation pulses are implemented for in vivo human imaging at 3 T. RESULTS: For three slices, multiphoton SMS provides a 51% reduction in SAR compared with conventional superposition SMS, whereas for five slices, SAR is reduced by 66%. Multiphoton SMS outperforms PINS (power independent of number of slices) and MultiPINS in terms of SAR reduction especially when the pulse duration is short, slices are thin, and/or the slice spacing is large. A custom CAIPIRINHA phase-encoding design for multiphoton SMS significantly improves reconstruction quality. CONCLUSION: Multiphoton SMS excitation can be obtained by combining conventional single-slice RF pulses with an oscillating gradient and offers significant SAR benefits compared with conventional superposition SMS. A novel CAIPIRINHA design allows higher multiband factors for multiphoton SMS imaging.

Chondrocyte deformation during the unloading phase of cyclic compression loading.

Cell volume and shape changes play a pivotal role in cellular mechanotransduction, governing cellular responses to external loading. Understanding the dynamics of cell behavior under loading conditions is essential to elucidate cell adaptation mechanisms in physiological and pathological contexts. In this study, we investigated the effects of dynamic cyclic compression loading on cell volume and shape changes, comparing them with static conditions. Using a custom-designed platform which allowed for simultaneous loading and imaging of cartilage tissue, tissues were subjected to 100 cycles of mechanical loading while measuring cell volume and shape alterations during the unloading phase at specific time points. The findings revealed a transient decrease in cell volume (13%) during the early cycles, followed by a gradual recovery to baseline levels after approximately 20 cycles, despite the cartilage tissue not being fully recovered at the unloading phase. This observed pattern indicates a temporal cell volume response that may be associated with cellular adaptation to the mechanical stimulus through mechanisms related to active cell volume regulation. Additionally, this study demonstrated that cell volume and shape responses during dynamic loading were significantly distinct from those observed under static conditions. Such findings suggest that cells in their natural tissue environment perceive and respond differently to dynamic compared to static mechanical cues, highlighting the significance of considering dynamic loading environments in studies related to cellular mechanics. Overall, this research contributes to the broader understanding of cellular behavior under mechanical stimuli, providing valuable insights into their ability to adapt to dynamic mechanical loading.

Multiphoton-pumped UV-Vis transient absorption spectroscopy of 2D materials: basic concepts and recent applications.

2D materials are considered a key element in the development of next-generation electronics (nanoelectronics) due to their extreme thickness in the nanometer range and unique physical properties. The ultrafast dynamics of photoexcited carriers in such materials are strongly influenced by their interfaces, since the thickness of 2D materials is much smaller than the typical depth of light penetration into their bulk counterparts and the mean free path of photoexcited carriers. The resulting collisions of photoexcited carriers with interfacial potential barriers of 2D materials in the presence of a strong laser field significantly alter the overall dynamics of photoexcitation, allowing laser light to be directly absorbed by carriers in the conduction/valence band through the inverse bremsstrahlung mechanism. The corresponding ultrafast carrier dynamics can be monitored using multiphoton-pumped UV-Vis transient absorption spectroscopy. In this review, we discuss the basic concepts and recent applications of this spectroscopy for a variety of 2D materials, including transition-metal dichalcogenide monolayers, topological insulators, and other 2D semiconductor structures.

Harmonic Imaging of Stem Cells in Whole Blood at GHz Pixel Rate.

The pre-clinical validation of cell therapies requires monitoring the biodistribution of transplanted cells in tissues of host organisms. Real-time detection of these cells in the circulatory system and identification of their aggregation state is a crucial piece of information, but necessitates deep penetration and fast imaging with high selectivity, subcellular resolution, and high throughput. In this study, multiphoton-based in-flow detection of human stem cells in whole, unfiltered blood is demonstrated in a microfluidic channel. The approach relies on a multiphoton microscope with diffractive scanning in the direction perpendicular to the flow via a rapidly wavelength-swept laser. Stem cells are labeled with metal oxide harmonic nanoparticles. Thanks to their strong and quasi-instantaneous second harmonic generation (SHG), an imaging rate in excess of 10 000 frames per second is achieved with pixel dwell times of 1 ns, a duration shorter than typical fluorescence lifetimes yet compatible with SHG. Through automated cell identification and segmentation, morphological features of each individual detected event are extracted and cell aggregates are distinguished from isolated cells. This combination of high-speed multiphoton microscopy and high-sensitivity SHG nanoparticle labeling in turbid media promises the detection of rare cells in the bloodstream for assessing novel cell-based therapies.

Two-dimensional electro-optical multiphoton microscopy.

Significance: The development of genetically encoded fluorescent indicators of neural activity with millisecond dynamics has generated demand for ever faster two-photon (2P) imaging systems, but acoustic and mechanical beam scanning technologies are approaching fundamental limits. We demonstrate that potassium tantalate niobate (KTN) electro-optical deflectors (EODs), which are not subject to the same fundamental limits, are capable of ultrafast two-dimensional (2D) 2P imaging in vivo. Aim: To determine if KTN-EODs are suitable for 2P imaging, compatible with 2D scanning, and capable of ultrafast in vivo imaging of genetically encoded indicators with millisecond dynamics. Approach: The performance of a commercially available KTN-EOD was characterized across a range of drive frequencies and laser parameters relevant to in vivo 2P microscopy. A second KTN-EOD was incorporated into a dual-axis scan module, and the system was validated by imaging signals in vivo from ASAP3, a genetically encoded voltage indicator. Results: Optimal KTN-EOD deflection of laser light with a central wavelength of 960 nm was obtained up to the highest average powers and pulse intensities tested (power: 350 mW; pulse duration: 118 fs). Up to 32 resolvable spots per line at a 560 kHz line scan rate could be obtained with single-axis deflection. The complete dual-axis EO 2P microscope was capable of imaging a 13 µm by 13 µm field-of-view at over 10 kHz frame rate with ∼0.5 µm lateral resolution. We demonstrate in vivo imaging of neurons expressing ASAP3 with high temporal resolution. Conclusions: We demonstrate the suitability of KTN-EODs for ultrafast 2P cellular imaging in vivo, providing a foundation for future high-performance microscopes to incorporate emerging advances in KTN-based scanning technology.