Polarization-Accelerated Seawater Splash Simulation for Rapid Evaluation of Protection Performance of an Epoxy Coating on Carbon Steel.

The application of organic coatings is the most cost-effective and common method for metallic equipment toward corrosion, whose anti-corrosion property needs to be improved and evaluated in a short time. To rapidly and rationally assess the anti-corrosion property of organic coatings in the ocean splash zone, a new accelerated test was proposed. In the study, the corrosion protection property of the coating samples was measured by an improved AC-DC-AC test in a simulated seawater of 3.5 wt.% NaCl solution, a simulated ocean splash zone test and a new accelerated test combining the above two tests. The results showed that the corrosion rate of the coating samples was high in the improved AC-DC-AC test, which lost its anti-corrosion property after 24 cycles equal to 96 h. The main rapid failure reason was that the time of the water and corrosive media arriving at the carbon steel substrate under the alternating cathodic and anodic polarization with symmetrical positive and negative electric charges was shortened. The entire impedance of the coating samples was improved by about 1.6 times more than that in the initial early time in the simulated ocean splash zone test, which was caused by the damage effect from the salt spraying, drying, humidifying, salt immersion, high temperature and UVA irradiation being weaker than the enhancement effect from the post-curing process by the UVA irradiation. In the new accelerated test, the samples lost their corrosion resistance after 12 cycles equal to 288 h with the fastest failure rate. On account of the coupling process of the salt spraying, drying, humidifying, salt immersion, high temperature combined with the cathodic and anodic polarization and the UVA irradiation, the penetration and transmission rate of water and corrosive media in the coating were further accelerated, the corrosion rate on the carbon steel substrate was reinforced even larger and the destruction of the top polymer molecules was more serious. The new accelerated test showed the strongest damage-acceleration effect than that in the other two tests.

Wandering albatrosses exert high take-off effort only when both wind and waves are gentle.

The relationship between the environment and marine animal small-scale behavior is not fully understood. This is largely due to the difficulty in obtaining environmental datasets with a high spatiotemporal precision. The problem is particularly pertinent in assessing the influence of environmental factors in rapid, high energy-consuming behavior such as seabird take-off. To fill the gaps in the existing environmental datasets, we employed novel techniques using animal-borne sensors with motion records to estimate wind and ocean wave parameters and evaluated their influence on wandering albatross take-off patterns. Measurements revealed that wind speed and wave heights experienced by wandering albatrosses during take-off ranged from 0.7 to 15.4 m/s and 1.6 to 6.4 m, respectively. The four indices measured (flapping number, frequency, sea surface running speed, and duration) also varied with the environmental conditions (e.g., flapping number varied from 0 to over 20). Importantly, take-off was easier under higher wave conditions than under lower wave conditions at a constant wind speed, and take-off effort increased only when both wind and waves were gentle. Our data suggest that both ocean waves and winds play important roles for albatross take-off and advances our current understanding of albatross flight mechanisms.

Wandering albatrosses are large seabirds with one of the most impressive wingspans found in the animal kingdom. While they spend most of their time efficiently gliding above the waves, they do have to regularly land on sea to snatch their prey. To resume flight, the birds turn into the wind and flap their wings as they run on the surface of the ocean; this causes their heart to beat three to four times faster than normal. In contrast, flying barely leads to a change in pulse rate compared to rest. As for many other marine birds, sea take-offs therefore represent one of the major energy costs that albatrosses face when out foraging. Scientists have long assumed that the amount of effort required for this manoeuvre depends on factors such as wind speed and, potentially, the height of the waves. However, this is difficult to establish for sure because direct information about the environment that a bird faces as it takes off is rarely available. Often, the best that researchers can do is to reconstruct this data based on global weather patterns, ocean climatic models or evidence collected from nearby locations. To address this problem, Uesaka et al. devised innovative ways to use data from animal-borne sensors. They equipped 44 albatrosses with these instruments and recorded over 1,500 hours of foraging sea trips. Wind parameters such as speed and direction were estimated based on the animals' flying paths, and wave height calculated from their floating motion. Sensor data also gave an insight into the energy cost of each take-off, which was estimated based on four parameters (running duration, running speed, number of wing flaps, and flapping frequency). The analyses confirmed that albatrosses take off into a headwind, with stronger winds reducing the amount of effort required. However, wave height also had a profound impact, suggesting that this parameter should be included in future studies. Overall, the birds flapped their wings less and ran on the surface of the water for shorter amounts of time when the wind was strong, or the waves were high. Even with weak winds, take offs were easier when waves were taller, and they were most costly when both the sea and wind were calm. The work by Uesaka et al. helps to capture how environmental factors influence the energy balance of albatrosses and other marine birds. As ocean weather patterns become more volatile and extreme climate events more frequent, such knowledge is acutely needed to understand how these creatures may respond to their changing world.

A Survey on Underwater Wireless Sensor Networks: Requirements, Taxonomy, Recent Advances, and Open Research Challenges.

The domain of underwater wireless sensor networks (UWSNs) had received a lot of attention recently due to its significant advanced capabilities in the ocean surveillance, marine monitoring and application deployment for detecting underwater targets. However, the literature have not compiled the state-of-the-art along its direction to discover the recent advancements which were fuelled by the underwater sensor technologies. Hence, this paper offers the newest analysis on the available evidences by reviewing studies in the past five years on various aspects that support network activities and applications in UWSN environments. This work was motivated by the need for robust and flexible solutions that can satisfy the requirements for the rapid development of the underwater wireless sensor networks. This paper identifies the key requirements for achieving essential services as well as common platforms for UWSN. It also contributes a taxonomy of the critical elements in UWSNs by devising a classification on architectural elements, communications, routing protocol and standards, security, and applications of UWSNs. Finally, the major challenges that remain open are presented as a guide for future research directions.

Leaching Methods for Ba Isotope Studies of Carbonates.

Barium (Ba) stable isotopes in carbonate rock have great potential to provide valuable information on environmental change and the biogeochemical cycles of oceans in the past. Ba in carbonate rock can exist in various phases, such as adsorbable and silicate-bound Ba. However, only the carbonate-bound phase is considered to record the Ba isotopic compositions of ambient seaweater. Here, we designed a two-step leaching experiment to obtain the carbonate-bound Ba in two typical carbonate rocks: limestone and cap dolostone. The results showed that after leaching by 1 mol L-1 ammonium acetate, the carbonate-bound Ba extracted by mixed solution of 1.5 mol L-1 acetic acid and 1 mol L-1 ammonium acetate in each studied sample have indistinguishable isotope ratios in leaching time conditions between 12 and 72 h. More importantly, the carbonate-bound Ba isotope ratios were quite different from those of the residue (up to 10 times of analytic uncertainty, 2SD ≤ ±0.04‰) after leaching in three out of four leaching experiments, indicating that noncarbonated fraction could overprint a primary seawater signal. Our sequential leaching techniques could improve targeting of carbonate-bound Ba isotope signatures in various carbonate rocks to trace the Ba cycling in the oceans.

Decomposing the effects of ocean environments on predator-prey body-size relationships in food webs.

Body-size relationships between predators and their prey are important in ecological studies because they reflect the structure and function of food webs. Inspired by studies on the impact of global warming on food webs, the effects of temperature on body-size relationships have been widely investigated; however, the impact of environmental factors on body-size relationships has not been fully evaluated because climate warming affects various ocean environments. Thus, here, we comprehensively investigated the effects of ocean environments and predator-prey body-size relationships by integrating a large-scale dataset of predator-prey body-size relationships in marine food webs with global oceanographic data. We showed that various oceanographic parameters influence prey size selection. In particular, oxygen concentration, primary production and salinity, in addition to temperature, significantly alter body-size relationships. Furthermore, we demonstrated that variability (seasonality) of ocean environments significantly affects body-size relationships. The effects of ocean environments on body-size relationships were generally remarkable for small body sizes, but were also significant for large body sizes and were relatively weak for intermediate body sizes, in the cases of temperature seasonality, oxygen concentration and salinity variability. These findings break down the complex effects of ocean environments on body-size relationships, advancing our understanding of how ocean environments influence the structure and functioning of food webs.

Numerical investigation into the restoration of ocean environments using steelmaking slag.

Steelmaking slag has been utilized in shore protection and to improve ocean environments of sea bottom sediments in semi-enclosed areas and coastal regions. This is achieved by reducing dissolved sulphide concentration. In this study, a numerical model is proposed and developed using a Eulerian-Lagrangian model coupled with an ocean circulation model to compute advection-diffusion of dissolved sulphides and fluid-particle interactions between ocean circulation and steelmaking slag. We applied the model to the Fukuyama inner harbour in the Seto Inland Sea and Tokyo Bay and compared our results with field data. The numerical results show good agreement with the field results. We demonstrate that steelmaking slag can control advection-diffusion with regard to concentration of hydrogen sulphide. The steelmaking slag could be a useful material in restoration of ocean environments at enclosed sea areas.

The Combined Effect of Cold and Moisture on Manual Performance.

Objective The aim of this study was to investigate the combined effect of cold and moisture on manual performance and tactile sensitivity. Background People working in the ocean environment often perform manual work in cold and wet conditions. Although the independent effects of cold and moisture on hand function are known, their combined effect has not been investigated. Method Participants completed sensory (Touch-Test, two-point discrimination) and motor (Purdue Pegboard, Grooved Pegboard, reef knot untying) tests in the following conditions: dry hand, wet hand, cold hand, and cold and wet hand. Results For the Purdue Pegboard and knot untying tasks, the greatest decrement in performance was observed in the cold-and-wet-hand condition, whereas the decrements seen in the cold-hand and wet-hand conditions were similar. In the Grooved Pegboard task, the performance decrements exhibited in the cold-and-wet-hand condition and the cold-hand condition were similar, whereas no decrement was observed in the wet-hand condition. Tactile sensitivity was reduced in the cold conditions for the Touch-Test but not the two-point discrimination test. CONCLUSION: The combined effect of cold and moisture led to the largest performance decrements except when intrinsic object properties helped with grasp maintenance. The independent effects of cold and moisture on manual performance were comparable. Application Tools and equipment for use in the cold ocean environment should be designed to minimize the effects of cold and moisture on manual performance by including object properties that enhance grasp maintenance and minimize the fine-dexterity requirements.

Behaviour of growth hormone transgenic coho salmon Oncorhynchus kisutch in marine mesocosms assessed by acoustic tag telemetry.

Underwater acoustic tag telemetry was used to assess behavioural differences between juvenile wild-type (i.e. non-transgenic, NT) and growth hormone (GH) transgenic (T) coho salmon Oncorhynchus kisutch in a contained simulated ocean environment. T O. kisutch were found across days to maintain higher baseline swimming speeds than NT O. kisutch and differences in response to feeding were detected between T and NT genotypes. This is the first study to assess behaviour of GH transgenic salmonids in a marine environment and has relevance for assessing whether behavioural effects of GH overexpression seen in freshwater environments can be extrapolated to oceanic phases of the life cycle.