The Sol-Gel Process, a Green Method Used to Obtain Hybrid Materials Containing Phosphorus and Zirconium.

The sol-gel process is a green method used in the last few decades to synthesize new organic-inorganic phosphorus-containing hybrid materials. The sol-gel synthesis is a green method because it takes place in mild conditions, mostly by using water or alcohol as solvents, at room temperature. Therefore, the sol-gel method is, among others, a promising route for obtaining metal-phosphonate networks. In addition to phosphorus, the obtained hybrid materials could also contain titanium, zirconium, boron, and other elements, which influence their properties. The sol-gel process has two steps: first, the sol formation, and second, the transition to the gel phase. In other words, the sol-gel process converts the precursors into a colloidal solution (sol), followed by obtaining a network (gel). By using the sol-gel method, different organic moieties could be introduced into an inorganic matrix, resulting in organic-inorganic hybrid structures (sometimes they are also referred as organic-inorganic copolymers).

Evolution of Surface Chemistry in Two-Dimensional MXenes: From Mixed to Tunable Uniform Terminations.

Surface chemistry of MXenes is of great interest as the terminations can define the intrinsic properties of this family of materials. The diverse and tunable terminations also distinguish MXenes from many other 2D materials. Conventional fluoride-containing reagents etching approaches resulted in MXenes with mixed fluoro-, oxo-, and hydroxyl surface groups. The relatively strong chemical bonding of MXenes' surface metal atoms with oxygen and fluorine makes post-synthetic covalent surface modifications of such MXenes unfavorable. In this minireview, we focus on the recent advances in MXenes with uniform surface terminations. Unconventional methods, including Lewis acidic molten salt etching (LAMS) and bottom-up direct synthesis, have been proven successful in producing halide-terminated MXenes. These synthetic strategies have opened new possibilities for MXenes because weaker surface chemical bonds in halide-terminated MXenes facilitate post-synthetic covalent surface modifications. Both computational and experimental results on surface termination-dependent properties are summarized and discussed. Finally, we offer our perspective on the opportunities and challenges in this exciting research field.

The interaction on HSA and the antibacterial activity from four polyoxometalate hybrids based on berberine.

Four organic-polyoxometalate hybrids BR4[SiW12O40] (BR-SiW), BR3[PMo12O40] (BR-PMo), BR4K[EuSiW11O40]·2H2O (BR-EuSiW) and BR6Na3[EuW10O36] (BR-EuW) were fabricated by the polyoxometalates (POMs) anions and berberine cations (BR) noted for the alkaloids in traditional Chinese herbal medicine. These hybrids have been characterized and confirmed. The interaction between hybrids and human serum albumin (HSA) was investigated in a buffer solution (pH 7.4) using ultraviolet-visible light absorption and fluorescence techniques. The classical Stern-Volmer equation was used to analyze the fluorescence quenching at three temperatures (296, 303 and 310 K), and the static quenching mechanism for interaction was proposed. The Thermodynamic parameters, enthalpy, entropy change, and Gibbs free energy of hybrids interacting on HSA were calculated by Scatchard equation. The results indicated that therewas one binding site on the protein and BR-POMs all showed stronger binding force than that of raw materials. Synchronous fluorescence results showed that the binding sites of BR-POMs and HSA were not effectively affected the surrounding microenvironment. The following antibacterial experiments implied that inhibitory effect of hybrids were synergistic effect from organic active ingredient and POMs but the simple combination. All these data were prepared for further research on biology.

A SEM-EDX Study on the Structure of Phenyl Phosphinic Hybrids Containing Boron and Zirconium.

The SEM-EDX method was used to investigate the structure and morphology of organic-inorganic hybrids containing zirconium, boron and phosphorus compounds, synthesized by the sol-gel method. We started by using, for the first time together, zirconyl chloride hexa-hydrate (ZrOCl2·6H2O), phenyl phosphinic acid and triethyl borate as precursors and reagents, at different molar ratios. The obtained hybrids showed a very high thermal stability and are not soluble in water or in organic solvents. As a consequence, such hybrid solid materials are suitable for applications at high temperatures. The obtained hybrids have complex 3D structures and form organic-inorganic networks containing Zr-O-Zr, Zr-O-P and Zr-O-B bridges. Such organic-inorganic networks are also expected to form supramolecular structures and to have many potential applications in different fields of great interest such as catalysis, medicine, agriculture, energy storage, fuel cells, sensors, electrochemical devices and supramolecular chemistry.

The Impact of the Molecular Weight of Degradation Products with Silicon from Porous Chitosan-Siloxane Hybrids on Neuronal Cell Behavior.

Silicon (Si) is an essential trace element in the human body and it exists in connective tissue as aqueous orthosilicic acid. Porous chitosan-3-glycidoxypropyltrimethoxysilane (GPTMS) hybrids can regenerate nerve tissue and recover sensor and motor functions. However, the structures and roles of the degradation products with Si extracted from the hybrids in nerve regeneration are not clear. In this study, we prepared porous chitosan-GPTMS hybrids with different amounts of GPTMS to amino groups of chitosan (chitosan:GPTMS = 1:0.5 and 1:1 molar ratios). The structures of the degradation products with Si from the hybrids were examined using time-of-flight mass spectrometry, and biological assessments were conducted in order to evaluate their potential use in the preparation of devices for nerve repair. Glial and motor cell lines and ex vivo explants of dorsal root ganglia were used in this study for evaluating their behavior in the presence of the different degradation products with Si. The structure of the degradation products with Si depended on the starting composition. The results showed that glial cell proliferation was lower in the medium with the higher-molecular-weight degradation products with Si. Moreover, motor cell line differentiation and the neurite outgrowth of dorsal root ganglion explants were improved with the lower-molecular-weight degradation products with Si. The results obtained could be useful for designing a new nerve regeneration scaffold including silicon components.

Zero-Dimensional Sn-Based Enantiomeric Phase-Transition Materials with High-Tc and Dielectric Switching.

The combination of chirality and phase-transition materials has broad application prospects. Therefore, based on the quasi-spherical theory and the thought strategy of introducing chirality, we have successfully synthesized a pair of chiral enantiomeric ligands (R/S)-triethyl-(2-hydroxypropyl)ammonium iodide, which can be combined with a tin hexachloride anion to obtain a pair of new organic-inorganic hybrid enantiomeric high-temperature plastic phase-transition materials: (R/S)-[CH3 CH(OH)CH2 N(CH2 CH3 )3 ]2 SnCl6 (1-R/1-S), which have a high temperature phase transition of Tc =384 K, crystallize in the P21 chiral space group at room temperature, and have obvious CD signals. In addition, compounds 1-R and 1-S have a good low-loss dielectric switch and broadband gap. This work is conducive to the research into chiral high-temperature reversible plastic phase-transition materials, and promotes the development of multi-functional phase-transition materials.

A Transformable Mucoadhesive Microgel Network for Noninvasive Multimodal Imaging And Radioprotection of a Large Area of the Gastrointestinal Tract.

The lack of noninvasive imaging and modulation of a large area of the gastrointestinal (GI) tract constrain the diagnosis and treatment of many GI-related diseases. Recent advances use novel mucoadhesive materials to coat a part of the GI tract and then modulate its functions. High mucoadhesion is the key factor of the partial coating, but also the limitation for not spreading and covering the lower GI tract. Here, a bismuth-pectin organic-inorganic hybrid complex is screened and engineered into a transformable microgel network (Bi-GLUE) with high flowability and mucoadhesion, such that it can quickly transit through and coat a large area of the GI tract. In murine and porcine models, Bi-GLUE delivers contrast agents to achieve real-time, large-area GI-tract imaging under X-ray or magnetic resonance  modalities and to facilitate the non-invasive diagnosis of familial adenomatous polyposis. Moreover, Bi-GLUE, like an intracorporal radiation shield, decreases the radiotoxicity in a whole-abdomen irradiation rat model. This transformable microgel network offers a new direction that can modulate a large area of the GI tract and may have broad applications for GI-related conditions.

Degradation Kinetics of Organic-Inorganic Hybrid Materials from Micro-Raman Spectroscopy and Density-Functional Theory: The Case of ß-ZnTe(en)0.5.

Organic-inorganic hybrid materials often face a stability challenge. ß-ZnTe(en)0.5 , which uniquely has over 15-year real-time degradation data, is taken as a prototype structure to demonstrate an accelerated thermal aging method for assessing the intrinsic and ambient-condition long-term stability of hybrid materials. Micro-Raman spectroscopy is used to investigate the thermal degradation of ß-ZnTe(en)0.5 in a protected condition and in air by monitoring the temperature dependences of the intrinsic and degradation-product Raman modes. First, to understand the intrinsic degradation mechanism, the transition state of the degradation is identified, then using a density functional theory, the intrinsic energy barrier between the transition state and ground state is calculated to be 1.70 eV, in excellent agreement with the measured thermal degradation barrier of 1.62 eV in N2 environment. Second, for the ambient-condition degradation, a reduced thermal activation barrier of 0.92 eV is obtained due to oxidation, corresponding to a projected ambient half-life of 40 years at room temperature, in general agreement with the experimental observation of no apparent degradation over 15 years. Furthermore, the study reveals a mechanism, conformation distortion enhanced stability, which plays a pivotal role in forming the high kinetic barrier, contributing greatly to the impressive long-term stability of ß-ZnTe(en)0.5 .

Unprecedented Chiral Three-dimensional Hybrid Organic-Inorganic Perovskitoids.

Chiral three-dimensional hybrid organic-inorganic perovskites (3D HOIPs) would show unique chiroptoelectronic performance due to the combination of chirality and 3D structure. However, the synthesis of 3D chiral HOIPs remains a significant challenge. Herein, we constructed a pair of unprecedented 3D chiral halide perovskitoids (R/S-BPEA)EA6 Pb4 Cl15 (1-R/S) (R/S-BPEA=(R/S)-1-4-Bromophenylethylammonium, EA=ethylammonium), in which the large chiral cations can be contained in the big "hollow" inorganic frameworks induced by mixing cations. Notably, 3D 1-R/S shows natural chiroptical activity, as evidenced by its significant mirror circular dichroism spectra and the ability to distinguish circularly polarized light. Moreover, based on the unique 3D structure, 1-S presents sensitive X-ray detection performance with a low detection limit of 398 nGyair s-1 , which is 14 times lower than the regular medical diagnosis of 5.5 µGyair s-1 . In this work, 3D chiral halide perovskitoids provide a new route to develop chiral material in spintronics and optoelectronics.

Hybrid Membranes of the Ureasil-Polyether Containing Glucose for Future Application in Bone Regeneration.

The application of mesenchymal stem cells (MSC) in bone tissue regeneration can have unpredictable results due to the low survival of cells in the process since the lack of oxygen and nutrients promotes metabolic stress. Therefore, in this work, polymeric membranes formed by organic-inorganic hybrid materials called ureasil-polyether for modified glucose release were developed in order to overcome the problems posed by a of lack of this nutrient. Thus, membranes formed by polymeric blend of polypropylene oxide (PPO4000) and polyethylene oxide (PEO500) with 6% glucose incorporation were developed. Physical-chemical characterization techniques were performed, as well as tests that evaluated thermal properties, bioactivity, swelling, and release in SBF solution. The results of the swelling test showed an increase in membrane mass correlated with an increase in the concentration of ureasil-PEO500 in the polymeric blends. The membranes showed adequate resistance when subjected to the application of a high compression force (15 N). X-ray diffraction (XRD) evidenced peaks corresponding to orthorhombic crystalline organization, but the absence of glucose-related peaks showed characteristics of the amorphous regions of hybrid materials, likely due to solubilization. Thermogravimetry (TG) and differential scanning calorimetry (DSC) analyses showed that the thermal events attributed to glucose and hybrid materials were similar to that seen in the literature, however when glucose was incorporated into the PEO500, an increase in rigidity occurs. In PPO400, and in the blends of both materials, there was a slight decrease in Tg values. The smaller contact angle for the ureasil-PEO500 membrane revealed the more hydrophilic character of the material compared to other membranes. The membranes showed bioactivity and hemocompatibility in vitro. The in vitro release test revealed that it is possible to control the release rate of glucose and the kinetic analysis revealed a release mechanism characteristic of anomalous transport kinetics. Thus, we can conclude that ureasil-polyether membranes have great potential to be used as a glucose release system, and their future application has the potential to optimize the bone regeneration process.

Chitosan-Based Biomaterials: Insights into Chemistry, Properties, Devices, and Their Biomedical Applications.

Chitosan is a marine-origin polysaccharide obtained from the deacetylation of chitin, the main component of crustaceans' exoskeleton, and the second most abundant in nature. Although this biopolymer has received limited attention for several decades right after its discovery, since the new millennium chitosan has emerged owing to its physicochemical, structural and biological properties, multifunctionalities and applications in several sectors. This review aims at providing an overview of chitosan properties, chemical functionalization, and the innovative biomaterials obtained thereof. Firstly, the chemical functionalization of chitosan backbone in the amino and hydroxyl groups will be addressed. Then, the review will focus on the bottom-up strategies to process a wide array of chitosan-based biomaterials. In particular, the preparation of chitosan-based hydrogels, organic-inorganic hybrids, layer-by-layer assemblies, (bio)inks and their use in the biomedical field will be covered aiming to elucidate and inspire the community to keep on exploring the unique features and properties imparted by chitosan to develop advanced biomedical devices. Given the wide body of literature that has appeared in past years, this review is far from being exhaustive. Selected works in the last 10 years will be considered.

Structural Significance of Hydrophobic and Hydrogen Bonding Interaction for Nanoscale Hybridization of Antiseptic Miramistin Molecules with Molybdenum Disulfide Monolayers.

This paper reports an easy route to immobilize the antiseptic drug miramistin (MR) molecules between the sheets of molybdenum disulfide, known for excellent photothermal properties. Two hybrid layered compounds (LCs) with regularly alternating monolayers of MR and MoS2, differing in thickness of organic layer are prepared and studied by powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), density functional theory (DFT) calculations and quantum theory of atoms in molecules (QTAIM) topological analysis. The obtained structural models elucidate the noncovalent interaction network of MR molecules confined in the two-dimensional spacing surrounded by sulfide sheets. It emerged that the characteristic folded geometry of MR molecule previously evidenced for pure miramistin is preserved in the hybrid structures. Quantification of the energetics of bonding interactions unveils that the most important contribution to structure stabilization of both compounds is provided by the weak but numerous CH…S bonding contacts. They are accompanied by the intra- and inter-molecular interactions within the MR layers, with dominating bonding effect of intermolecular hydrophobic interaction. The results obtained in the models provide a comprehensive understanding of the driving forces controlling the assembly of MR and MoS2 and may lead towards the development of novel promising MoS2-based photothermal therapeutic agents.

Organic-Inorganic Hybrid Pigments Based on Bentonite: Strategies to Stabilize the Quinoidal Base Form of Anthocyanin.

Anthocyanins are one of the natural pigments that humanity has employed the most and can substitute synthetic food dyes, which are considered toxic. They are responsible for most purple, blue, and red pigment nuances in tubers, fruits, and flowers. However, they have some limitations in light, pH, oxygen, and temperature conditions. Combining biomolecules and inorganic materials such as clay minerals can help to reverse these limitations. The present work aims to produce materials obtained using cetyltrimethylammonium bromide in bentonite clay for incorporation and photostabilization of anthocyanin dye. Characterizations showed that the organic molecules were intercalated between the clay mineral layers, and the dye was successfully incorporated at a different pH. Visible light-driven photostability tests were performed with 200 h of irradiation, confirming that the organic-inorganic matrices were efficient enough to stabilize the quinoidal base form of anthocyanin. The pigment prepared at pH 10 was three-fold more stable than pH 4, showing that the increase in the synthesis pH promotes more stable colors, probably due to the stronger intermolecular interaction obtained under these conditions. Therefore, organobentonite hybrids allow to stabilize the fragile color coming from the quinoidal base form of anthocyanin dyes.

High-Tc 1D Phase-Transition Semiconductor Photoluminescent Material with Broadband Emission.

One dimensional (1D) organic-inorganic halide hybrid perovskites have the advantages of excellent organic cation modifiability and diversity of inorganic framework structures, which cannot be ignored in the development of multi-functional phase-transition materials in photoelectric and photovoltaic devices. Here, we have successfully modified and synthesized an organic-inorganic hybrid perovskite photoelectric multifunctional phase-transition material: [C7 H13 ONCH2 F]⋅PbBr3 (1). The synergistic effect of the order double disorder transition of organic cations and the change of the degree of distortion of the inorganic framework leads to its high temperature reversible phase-transition point of Tc =374 K/346 K and its ultra-low loss high-quality dielectric switch response. Through in-depth research and calculation, compound 1 also has excellent semiconductor characteristics with a band gap of 3.06 eV and the photoluminescence characteristics of self-trapped exciton (STE) broadband emission. Undoubtedly, this modification strategy provides a new choice for the research field of organic-inorganic hybrid perovskite reversible phase-transition photoelectric multifunctional materials with rich coupling properties.

Practical and Rapid Membrane-Based Biosensor for Phenol Using Copper/Calcium-Enzyme Hybrid Nanoflowers.

Phenol, a pollutant frequently found in chemical industries effluents, is highly toxic even in low concentrations. This study reports a green, simple, and rapid method for qualitative phenol biosensing using horseradish peroxidase (HRP) hybrid nanoflowers made with copper (Cu2+-hNF) or calcium (Ca2+-hNF) ions. The enzyme was immobilized through protein-inorganic self-assembly into hybrid structures and subsequently supported onto a polyvinylidene fluoride (PVDF) membrane. SEM, EDS, FTIR, and XRD techniques sustained the effective enzyme encapsulation into hybrid structures. The protein concentration in the structures was 0.25 mg.mL-1 for both ions. The best temperature and pH were 60 °C and 7.4, respectively, for both hybrids and the free enzyme, suggesting that the immobilization did not affect the optimal conditions of the free HRP. Thermal stability from 25 to 70 °C and pH stability from 4.0 to 9.0 of the hybrids were also determined. Finally, using copper and calcium hybrids, both biosensors produced onto a PVDF membrane could detect phenol in concentrations ranging from 0.72 to 24.00 µmol.mL-1 in 1 min. In contrast, control biosensors produced with free enzyme have not presented a visible color change in the same conditions. The findings suggest a promising application of the developed biosensors in functional phenol detection.

Weak Coordinating Character of Organosulfonates in Oriented Silica Films: An Efficient Approach for Immobilizing Cationic Metal-Transition Complexes.

Iron (II) tris(2,2'-bipyridine) complexes, [Fe(bpy)3]2+, have been synthesized and immobilized in organosulfonate-functionalized nanostructured silica thin films taking advantage of the stabilization of [Fe(H2O)6]2+ species by hydrogen bonds to the anionic sulfonate moieties grafted to the silica nanopores. In a first step, thiol-based silica films have been electrochemically generated on indium tin oxide (ITO) substrates by co-condensation of 3-mercaptopropyltrimethoxysilane (MPTMS) and tetraethoxysilane (TEOS). Secondly, the thiol function has been modified to sulfonate by chemical oxidation using hydrogen peroxide in acidic medium as an oxidizing agent. The immobilization of [Fe(bpy)3]2+ complexes has been performed in situ in two consecutive steps: (i) impregnation of the sulfonate functionalized silica films in an aqueous solution of iron (II) sulfate heptahydrate; (ii) dipping of the iron-containing mesostructures in a solution of bipyridine ligands in acetonitrile. The in situ formation of the [Fe(bpy)3]2+ complex is evidenced by its characteristic optical absorption spectrum, and elemental composition analysis using X-ray photoelectron spectroscopy. The measured optical and electrochemical properties of immobilized [Fe(bpy)3]2+ complexes are not altered by confinement in the nanostructured silica thin film.

Original Basic Activation for Enhancing Silica Particle Reactivity: Characterization by Liquid Phase Silanization and Silica-Rubber Nanocomposite Properties.

Silica fillers are used in various nanocomposites in combination with silanes as a reinforcing filler. In tire technology, silica is generally functionalized before (pre-treated) or during mixing (in-situ silanization or post-treated). In both cases, a soft base catalyst (e.g., triethylamine or diphenyl guanidine, DPG) is typically used to accelerate and increase the yield of the silane/silica coupling reaction. In this study, we investigated how pre-treatments of silica particles with either strong amine or hydride bases impact the silanization of silica prior to or during SBR mixing for silica-rubber nanocomposite fabrication. Our findings are supported by molecular characterization (solid state 29Si NMR, 1H NMR and TGA), and scanning electron microscopy. In addition, the impact of these silica pre-treatments on a nanocomposite's mechanical properties was evaluated using dynamic mechanical analysis (DMA).

Nitric Oxide-Releasing Supramolecular Cellulose Nanocrystal/Silsesquioxane Foams.

Cellulose nanocrystals (CNC)-based foams are promising tissue engineering materials that may facilitate implant-tissue integration and allow localized and controlled drug delivery. Herein, hybrid CNC-based foams, which are ultralightweight (30-100 mg cm-3 ), highly porous (>95%), ominiphilic and superabsorbent (1500-3000 wt% of water and/or toluene uptake) are obtained by the in situ condensation of poly(ethylene glycol) ditriethoxysilyl (TES-PEG-TES) into a 3D network, where silsesquioxane nanoparticles (SS-NP) are the crosslinking nodes, and CNC are entrapped forming ionic interactions, in a supramolecular structure. In a new approach, using 3-mercaptopropyltrimethoxysilane, sulfhydryl groups are inserted on the SS-NP periphery and S-nitrosated to enable the functionalization of SS-NP with S-nitrosothiol groups, which can nitric oxide (NO), in a process triggered by the hydration of the foams and modulated by their supramolecular structure. CNC-SS-PEG foams exhibit elevated thermal and structural stability, compressive strength compatible with various soft human tissues, and NO release rates (1-18 pmol mg-1 min-1 ) within the range of the beneficial NO actions. Thus, the CNC-SS-PEG foams herein described represent a new platform of supramolecular hybrid materials for localized delivery of NO, with potential uses in tissue engineering and other biomedical applications.

Nanoflowers: A New Approach of Enzyme Immobilization.

Enzymes are biocatalysts known for versatility, selectivity, and brand operating conditions compared to chemical catalysts. However, there are limitations to their large-scale application, such as the high costs of enzymes and their low stability under extreme reaction conditions. Immobilization techniques can efficiently solve these problems; nevertheless, most current methods lead to a significant loss of enzymatic activity and require several steps of activation and functionalization of the supports. In this context, a new form of immobilization has been studied: forming organic-inorganic hybrids between metal phosphates as inorganic parts and enzymes as organic parts. Compared to traditional immobilization methods, the advantages of these nanomaterials are high surface area, simplicity of synthesis, high stability, and catalytic activity. The current study presents an overview of organic-inorganic hybrid nanoflowers and their applications in enzymatic catalysis.

Organic/Inorganic Self-Assembled Hybrid Nano-Architectures for Cancer Therapy Applications.

Since the conceptualization of nanomedicine, numerous nanostructure-mediated drug formulations have progressed into clinical trials for treating cancer. However, recent clinical trial results indicate such kind of drug formulations has a limited improvement on the antitumor efficacy. This is due to the biological barriers associated with those formulations, for example, circulation stability, extravasation efficiency in tumor, tumor penetration ability, and developed multi-drug resistance. When employing for nanomedicine formulations, pristine organic-based and inorganic-based nanostructures have their own limitations. Accordingly, organic/inorganic (O/I) hybrids have been developed to integrate the merits of both, and to minimize their intrinsic drawbacks. In this context, the recent development in O/I hybrids resulting from a self-assembly strategy will be introduced. Through such a strategy, organic and inorganic building blocks can be self-assembled via either chemical covalent bonds or physical interactions. Based on the self-assemble procedure, the hybridization of four organic building blocks including liposomes, micelles, dendrimers, and polymeric nanocapsules with five functional inorganic nanoparticles comprising gold nanostructures, magnetic nanoparticles, carbon-based materials, quantum dots, and silica nanoparticles will be highlighted. The recent progress of these O/I hybrids in advanced modalities for combating cancer, such as, therapeutic agent delivery, photothermal therapy, photodynamic therapy, and immunotherapy will be systematically reviewed.