RESUMO
Fenton and Fenton-like processes, which could produce highly reactive species to degrade organic contaminants, have been widely used in the field of wastewater treatment. Therein, the chemistry of Fenton process including the nature of active oxidants, the complicated reactions involved, and the behind reason for its strongly pH-dependent performance, is the basis for the application of Fenton and Fenton-like processes in wastewater treatment. Nevertheless, the conflicting views still exist about the mechanism of the Fenton process. For instance, reaching a unanimous consensus on the nature of active oxidants (hydroxyl radical or tetravalent iron) in this process remains challenging. This review comprehensively examined the mechanism of the Fenton process including the debate on the nature of active oxidants, reactions involved in the Fenton process, and the behind reason for the pH-dependent degradation of contaminants in the Fenton process. Then, we summarized several strategies that promote the Fe(II)/Fe(III) cycle, reduce the competitive consumption of active oxidants by side reactions, and replace the Fenton reagent, thus improving the performance of the Fenton process. Furthermore, advances for the future were proposed including the demand for the high-accuracy identification of active oxidants and taking advantages of the characteristic of target contaminants during the degradation of contaminants by the Fenton process.
Assuntos
Peróxido de Hidrogênio , Ferro , Eliminação de Resíduos Líquidos , Ferro/química , Peróxido de Hidrogênio/química , Eliminação de Resíduos Líquidos/métodos , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Águas Residuárias/química , Oxirredução , Radical Hidroxila/químicaRESUMO
Microbial oxidation and the mechanism of Sb(III) are key governing elements in biogeochemical cycling. A novel Sb oxidizing bacterium, Klebsiella aerogenes HC10, was attracted early and revealed that extracellular metabolites were the main fractions driving Sb oxidation. However, linkages between the extracellular metabolite driven Sb oxidation process and mechanism remain elusive. Here, model phenolic and quinone compounds, i.e., anthraquinone-2,6-disulfonate (AQDS) and hydroquinone (HYD), representing extracellular oxidants secreted by K. aerogenes HC10, were chosen to further study the Sb(III) oxidation mechanism. N2 purging and free radical quenching showed that oxygen-induced oxidation accounted for 36.78% of Sb(III) in the metabolite reaction system, while hydroxyl free radicals (·OH) accounted for 15.52%. ·OH and H2O2 are the main driving factors for Sb oxidation. Radical quenching, methanol purification and electron paramagnetic resonance (EPR) analysis revealed that ·OH, superoxide radical (O2â¢-) and semiquinone (SQ-â¢) were reactive intermediates of the phenolic induced oxidation process. Phenolic-induced ROS are one of the main oxidants in metabolites. Cyclic voltammetry (CV) showed that electron transfer of quinone also mediated Sb(III) oxidation. Part of Sb(V) was scavenged by the formation of the secondary Sb(V)-bearing mineral mopungite [NaSb(OH)6] in the incubation system. Our study demonstrates the microbial role of oxidation detoxification and mineralization of Sb and provides scientific references for the biochemical remediation of Sb-contaminated soil.
Assuntos
Antimônio , Oxirredução , Espécies Reativas de Oxigênio , Transporte de Elétrons , Antimônio/metabolismo , Espécies Reativas de Oxigênio/metabolismoRESUMO
Secondary iron-sulfate minerals such as jarosite, which are easily formed in acid mine drainage, play an important role in controlling metal mobility. In this work, the typical iron-oxidizing bacterium Acidithiobacillus ferrooxidans ATCC 23270 was selected to synthesize jarosite in the presence of antimony ions, during which the solution behavior, synthetic product composition, and bacterial metabolism were studied. The results show that in the presence of Sb(V), Fe2+ was rapidly oxidized to Fe3+ by A. ferrooxidans and Sb(V) had no obvious effect on the biooxidation of Fe2+ under the current experimental conditions. The presence of Sb(III) inhibited bacterial growth and Fe2+ oxidation. For the group with Sb(III), products with amorphous phases were formed 72 hr later, which were mainly ferrous sulfate and pentavalent antimony oxide, and the amorphous precursor was finally transformed into a more stable crystal phase. For the group with Sb(V), the morphology and structure of jarosite were changed in comparison with those without Sb. The biomineralization process was accompanied by the removal of 94% Sb(V) to form jarosite containing the Fe-Sb-O complex. Comparative transcriptome analysis shows differential effects of Sb(III) and Sb(V) on bacterial metabolism. The expression levels of functional genes related to cell components were much more downregulated for the group with Sb(III) but much more regulated for that with Sb(V). Notably, cytochrome c and nitrogen fixation-relevant genes for the A.f_Fe2+_Sb(III) group were enhanced significantly, indicating their role in Sb(III) resistance. This study is of great value for the development of antimony pollution control and remediation technology.
Assuntos
Acidithiobacillus , Antimônio , Sulfatos , Acidithiobacillus/metabolismo , Acidithiobacillus/efeitos dos fármacos , Sulfatos/metabolismo , Compostos Férricos , Oxirredução , Mineração , Ferro/metabolismoRESUMO
Due to its high efficiency, Fe(II)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants. A lot of chemical Fe sludge along with various refractory pollutants was concomitantly produced, which may cause secondary environmental problems without proper disposal. We here innovatively proposed an effective method of achieving zero Fe sludge, reusing Fe resources (Fe recovery = 100%) and advancing organics removal (final TOC removal > 70%) simultaneously, based on the in situ formation of magnetic Ca-Fe layered double hydroxide (Fe3O4@CaFe-LDH) nano-material. Cations (Ca2+ and Fe3+) concentration (≥ 30 mmol/L) and their molar ratio (Ca:Fe ≥ 1.75) were crucial to the success of the method. Extrinsic nano Fe3O4 was designed to be involved in the Fe(II)-catalytic wastewater treatment process, and was modified by oxidation intermediates/products (especially those with COO- structure), which promoted the co-precipitation of Ca2+ (originated from Ca(OH)2 added after oxidation process) and by-produced Fe3+ cations on its surface to in situ generate core-shell Fe3O4@CaFe-LDH. The oxidation products were further removed during Fe3O4@CaFe-LDH material formation via intercalation and adsorption. This method was applicable to many kinds of organic wastewater, such as bisphenol A, methyl orange, humics, and biogas slurry. The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs. This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(II)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.
Assuntos
Oxirredução , Eliminação de Resíduos Líquidos , Águas Residuárias , Poluentes Químicos da Água , Poluentes Químicos da Água/química , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias/química , Catálise , Ferro/químicaRESUMO
The manganese-cobalt mixed oxide nanorods were fabricated using a hydrothermal method with different metal precursors (KMnO4 and MnSO4·H2O for MnOx and Co(NO3)2â 6H2O and CoCl2â 6H2O for Co3O4). Bamboo-like MnO2â Co3O4 (B-MnO2â Co3O4 (S)) was derived from repeated hydrothermal treatments with Co3O4@MnO2 and MnSO4â H2O, whereas Co3O4@MnO2 nanorods were derived from hydrothermal treatment with Co3O4 nanorods and KMnO4. The study shows that manganese oxide was tetragonal, while the cobalt oxide was found to be cubic in the crystalline arrangement. Mn surface ions were present in multiple oxidation states (e.g., Mn4+ and Mn3+) and surface oxygen deficiencies. The content of adsorbed oxygen species and reducibility at low temperature declined in the sequence of B-MnO2â Co3O4 (S) > Co3O4@MnO2 > MnO2 > Co3O4, matching the changing trend in activity. Among all the samples, B-MnO2â Co3O4 (S) showed the preeminent catalytic performance for the oxidation of toluene (T10% = 187°C, T50% = 276°C, and T90% = 339°C). In addition, the B-MnO2â Co3O4 (S) sample also exhibited good H2O-, CO2-, and SO2-resistant performance. The good catalytic performance of B-MnO2â Co3O4 (S) is due to the high concentration of adsorbed oxygen species and good reducibility at low temperature. Toluene oxidation over B-MnO2â Co3O4 (S) proceeds through the adsorption of O2 and toluene to form O*, OH*, and H2C(C6H5)* species, which then react to produce benzyl alcohol, benzoic acid, and benzaldehyde, ultimately converting to CO2 and H2O. The findings suggest that B-MnO2â Co3O4 (S) has promising potential for use as an effective catalyst in practical applications.
Assuntos
Cobalto , Compostos de Manganês , Oxirredução , Óxidos , Tolueno , Óxidos/química , Compostos de Manganês/química , Catálise , Cobalto/química , Tolueno/química , Poluentes Atmosféricos/químicaRESUMO
Innately designed to induce physiological changes, pharmaceuticals are foreknowingly hazardous to the ecosystem. Advanced oxidation processes (AOPs) are recognized as a set of contemporary and highly efficient methods being used as a contrivance for the removal of pharmaceutical residues. Since reactive oxygen species (ROS) are formed in these processes to interact and contribute directly toward the oxidation of target contaminant(s), a profound insight regarding the mechanisms of ROS leading to the degradation of pharmaceuticals is fundamentally significant. The conceptualization of some specific reaction mechanisms allows the design of an effective and safe degradation process that can empirically reduce the environmental impact of the micropollutants. This review mainly deliberates the mechanistic reaction pathways for ROS-mediated degradation of pharmaceuticals often leading to complete mineralization, with a focus on acetaminophen as a drug waste model.
Assuntos
Acetaminofen , Espécies Reativas de Oxigênio , Acetaminofen/química , Espécies Reativas de Oxigênio/metabolismo , Poluentes Químicos da Água/química , Oxirredução , Preparações Farmacêuticas/metabolismoRESUMO
Nowadays, it is still a challenge to prepared high efficiency and low cost formaldehyde (HCHO) removal catalysts in order to tackle the long-living indoor air pollution. Herein, δ-MnO2 is successfully synthesized by a facile ozonation strategy, where Mn2+ is oxidized by ozone (O3) bubble in an alkaline solution. It presents one of the best catalytic properties with a low 100% conversion temperature of 85°C for 50 ppm of HCHO under a GHSV of 48,000 mL/(g·hr). As a comparison, more than 6 times far longer oxidation time is needed if O3 is replaced by O2. Characterizations show that ozonation process generates a different intermediate of tetragonal ß-HMnO2, which would favor the quick transformation into the final product δ-MnO2, as compared with the relatively more thermodynamically stable monoclinic γ-HMnO2 in the O2 process. Finally, HCHO is found to be decomposed into CO2 via formate, dioxymethylene and carbonate species as identified by room temperature in-situ diffuse reflectance infrared fourier transform spectroscopy. All these results show great potency of this facile ozonation routine for the highly active δ-MnO2 synthesis in order to remove the HCHO contamination.
Assuntos
Formaldeído , Compostos de Manganês , Óxidos , Ozônio , Ozônio/química , Compostos de Manganês/química , Formaldeído/química , Óxidos/química , Poluentes Atmosféricos/química , Oxirredução , Temperatura , Poluição do Ar em Ambientes Fechados/prevenção & controle , CatáliseRESUMO
The environmental threat posed by stibnite is an important geoenvironmental issue of current concern. To better understand stibnite oxidation pathways, aerobic abiotic batch experiments were conducted in aqueous solution with varying δ18OH2O value at initial neutral pH for different lengths of time (15-300 days). The sulfate oxygen and sulfur isotope compositions as well as concentrations of sulfur and antimony species were determined. The sulfur isotope fractionation factor (Δ34SSO4-stibnite) values decreased from 0.8 to -2.1 during the first 90 days, and increased to 2.6 at the 180 days, indicating the dominated intermediate sulfur species such as S2O32-, S0, and H2S (g) involved in Sb2S3 oxidation processes. The incorporation of O into sulfate derived from O2 (â¼100%) indicated that the dissociated O2 was only directly adsorbed on the stibnite-S sites in the initial stage (0-90 days). The proportion of O incorporation into sulfate from water (27%-52%) increased in the late stage (90-300 days), which suggested the oxidation mechanism changed to hydroxyl attack on stibnite-S sites promoted by nearby adsorbed O2 on stibnite-Sb sites. The exchange of oxygen between sulfite and water may also contributed to the increase of water derived O into SO42-. The new insight of stibnite oxidation pathway contributes to the understanding of sulfide oxidation mechanism and helps to interpret field data.
Assuntos
Oxirredução , Isótopos de Oxigênio , Sulfatos , Isótopos de Enxofre , Isótopos de Enxofre/análise , Sulfatos/química , Isótopos de Oxigênio/análise , Antimônio/química , Modelos Químicos , Aerobiose , Oxigênio/química , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/química , ÓxidosRESUMO
Because of the recent widespread usage of antibiotics, the acquisition and dissemination of antibiotic-resistance genes (ARGs) were prevalent in the majority of habitats. Generally, the biological wastewater treatment processes used in wastewater treatment plants have a limited efficiencies of antibiotics resistant bacteria (ARB) disinfection and ARGs degradation and even promote the proliferation of ARGs. Problematically, ARB and ARGs in effluent pose potential risks if they are not further treated. Photocatalytic oxidation is considered a promising disinfection technology, where the photocatalytic process generates many free radicals that enhance the interaction between light and deoxyribonucleic acid (DNA) for ARB elimination and subsequent degradation of ARGs. This review aims to illustrate the progress of photocatalytic oxidation technology for removing antibiotics resistant (AR) from wastewater in recent years. We discuss the sources and transfer of ARGs in wastewater. The overall removal efficiencies of ultraviolet radiation (UV)/chlorination, UV/ozone, UV/H2O2, and UV/sulfate-radical based system for ARB and ARGs, as well as the experimental parameters and removal mechanisms, are systematically discussed. The contribution of photocatalytic materials based on TiO2 and g-C3N4 to the inactivation of ARB and degradation of ARGs is highlighted, producing many free radicals to attack ARB and ARGs while effectively limiting the horizontal gene transfer (HGT) in wastewater. Finally, based on the reviewed studies, future research directions are proposed to realize specific photocatalytic oxidation technology applications and overcome current challenges.
Assuntos
Eliminação de Resíduos Líquidos , Águas Residuárias , Águas Residuárias/química , Eliminação de Resíduos Líquidos/métodos , Bactérias , Desinfecção/métodos , Farmacorresistência Bacteriana/genética , Raios Ultravioleta , Purificação da Água/métodosRESUMO
Heterogeneous oxidation by gas-phase oxidants is an important chemical transformation pathway of secondary organic aerosol (SOA) and plays an important role in controlling the abundance, properties, as well as climate and health impacts of aerosols. However, our knowledge on this heterogeneous chemistry remains inadequate. In this study, the heterogeneous oxidation of α-pinene ozonolysis SOA by hydroxyl (OH) radicals was investigated under both low and high relative humidity (RH) conditions, with an emphasis on the evolution of molecular composition of SOA and its RH dependence. It is found that the heterogeneous oxidation of SOA at an OH exposure level equivalent to 12 hr of atmospheric aging leads to particle mass loss of 60% at 25% RH and 95% at 90% RH. The heterogeneous oxidation strongly changes the molecular composition of SOA. The dimer-to-monomer signal ratios increase dramatically with rising OH exposure, in particular under high RH conditions, suggesting that aerosol water stimulates the reaction of monomers with OH radicals more than that of dimers. In addition, the typical SOA tracer compounds such as pinic acid, pinonic acid, hydroxy pinonic acid and dimer esters (e.g., C17H26O8 and C19H28O7) have lifetimes of several hours against heterogeneous OH oxidation under typical atmospheric conditions, which highlights the need for the consideration of their heterogeneous loss in the estimation of monoterpene SOA concentrations using tracer-based methods. Our study sheds lights on the heterogeneous oxidation chemistry of monoterpene SOA and would help to understand their evolution and impacts in the atmosphere.
Assuntos
Aerossóis , Poluentes Atmosféricos , Monoterpenos Bicíclicos , Umidade , Radical Hidroxila , Oxirredução , Aerossóis/química , Radical Hidroxila/química , Monoterpenos Bicíclicos/química , Poluentes Atmosféricos/química , Poluentes Atmosféricos/análise , Ozônio/química , Modelos Químicos , Atmosfera/química , Monoterpenos/químicaRESUMO
In this study, non-thermal plasma (NTP) was employed to modify the Cu/TiO2 adsorbent to efficiently purify H2S in low-temperature and micro-oxygen environments. The effects of Cu loading amounts and atmospheres of NTP treatment on the adsorption-oxidation performance of the adsorbents were investigated. The NTP modification successfully boosted the H2S removal capacity to varying degrees, and the optimized adsorbent treated by air plasma (Cu/TiO2-Air) attained the best H2S breakthrough capacity of 113.29 mg H2S/gadsorbent, which was almost 5 times higher than that of the adsorbent without NTP modification. Further studies demonstrated that the superior performance of Cu/TiO2-Air was attributed to increased mesoporous volume, more exposure of active sites (CuO) and functional groups (amino groups and hydroxyl groups), enhanced Ti-O-Cu interaction, and the favorable ratio of active oxygen species. Additionally, the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results indicated the main reason for the deactivation was the consumption of the active components (CuO) and the agglomeration of reaction products (CuS and SO42-) occupying the active sites on the surface and the inner pores of the adsorbents.
Assuntos
Cobre , Sulfeto de Hidrogênio , Oxirredução , Titânio , Titânio/química , Adsorção , Cobre/química , Sulfeto de Hidrogênio/química , Poluentes Atmosféricos/química , Gases em Plasma/química , Modelos QuímicosRESUMO
The expandable graphite (EG) modified TiO2 nanocomposites were prepared by the high shear method using the TiO2 nanoparticles (NPs) and EG as precursors, in which the amount of EG doped in TiO2 was 10 wt.%. Followed by the impregnation method, adjusting the pH of the solution to 10, and using the electrostatic adsorption to achieve spatial confinement, the Pt elements were mainly distributed on the exposed TiO2, thus generating the Pt/10EG-TiO2-10 catalyst. The best CO oxidation activity with the excellent resistance to H2O and SO2 was obtained over the Pt/10EG-TiO2-10 catalyst: CO conversion after 36 hr of the reaction was ca. 85% under the harsh condition of 10 vol.% H2O and 100 ppm SO2 at a high gaseous hourly space velocity (GHSV) of 400,000 hr-1. Physicochemical properties of the catalysts were characterized by various techniques. The results showed that the electrostatic adsorption, which riveted the Pt elements mainly on the exposed TiO2 of the support surface, reduced the dispersion of Pt NPs on EG and achieved the effective dispersion of Pt NPs, hence significantly improving CO oxidation activity over the Pt/10EG-TiO2-10 catalyst. The 10 wt.% EG doped in TiO2 caused the TiO2 support to form a more hydrophobic surface, which reduced the adsorption of H2O and SO2 on the catalyst, greatly inhibited deposition of the TiOSO4 and formation of the PtSO4 species as well as suppressed the oxidation of SO2, thus resulting in an improvement in the resistance to H2O and SO2 of the Pt/10EG-TiO2-10 catalyst.
Assuntos
Grafite , Oxirredução , Platina , Dióxido de Enxofre , Titânio , Titânio/química , Grafite/química , Dióxido de Enxofre/química , Platina/química , Catálise , Monóxido de Carbono/química , Água/química , Poluentes Atmosféricos/química , Modelos QuímicosRESUMO
The oxidation of aldehydes on a copper-based electrocatalyst within a small potential window can produce hydrogen at the anode, thus offering a bipolar hydrogen production system. However, the inherent activity and stability of Cu-based electrocatalysts for aldehyde oxidation are still not satisfactory in practical application. Herein, by coating an ultrathin carbon shell on the copper sphere, an effective and stable formaldehyde oxidation reaction (FOR) can be realized to produce H2 at a very low potential. FOR needs only a potential of 0.13 V (vs RHE) to reach a current density of 100 mA cm-2. By coupling FOR with hydrogen evolution reaction (HER), hydrogen is generated simultaneously at both the cathode and the anode. The Faraday efficiency of H2 at the bipolar state is close to 100%. In a flow cell, it needs a low cell voltage of 0.1 V to reach a current density of 100 mA cm-2. Moreover, it can be operated steadily for more than 30 h at high current density. The carbon shell acts as an armor to protect the Cu(0) sites, avoid the oxidation of copper, and keep the catalyst activity for a long time in the electrolytic process. Experimental and theoretical calculation results indicate that electron transfer occurs at the interface between the copper core and ultrathin carbon shell. The ultrathin carbon-coated Cu reduces the reaction energy barrier, making the C-H bond more easily fractured and facilitating H coupling to generate H2. This study provides a basic principle for the design of copper-based electrocatalysts with long durability and activity.
RESUMO
The structured processing of graphite is complex and challenging, in which expanded graphite plays a crucial role. Given its superior physical and chemical properties, expanded graphite finds extensive application in diverse domains such as electrochemistry and thermal management. However, the traditional preparation process is inconvenient in effectively meeting the design requirements on the macro and micro scales, which presents a challenge for the structured processing of expanded graphite materials. Here, an innovative method is first proposed for the controllable preparation of expanded graphite microspheres. Inspired by the explosion process of popcorn, the controlled gas release inside the natural flake graphite during chemical expansion is regulated by fuming sulfuric acid, realizing the controllable preparation of expanded graphite microspheres. Subsequently, sulfur trioxide can also intensify the degree of oxidation on the surface of the microspheres. The controllable microsphere morphology endows the composite with good isotropic network bonding, with considerable thermal conductivity of 1.703 W m-1 K-1 at low loading of 10 wt.% and reliable cyclic stability. This work opens up a new way for the morphology control of expanded graphite and provides a novel design thought for the physical and chemical structure control of carbon materials in the future.
RESUMO
Epigenetic regulation of metabolism profoundly influences cell fate commitment. During osteoclast differentiation, the activation of RANK signaling is accompanied by metabolic reprogramming, but the epigenetic mechanisms by which RANK signaling induces this reprogramming remain elusive. By transcriptional sequence and ATAC analysis, this study identifies that activation of RANK signaling upregulates PRMT6 by epigenetic modification, triggering a metabolic switching from fatty acids oxidation toward glycolysis. Conversely, Prmt6 deficiency reverses this shift, markedly reducing HIF-1α-mediated glycolysis and enhancing fatty acid oxidation. Consequently, PRMT6 deficiency or inhibitor impedes osteoclast differentiation and alleviates bone loss in ovariectomized (OVX) mice. At the molecular level, Prmt6 deficiency reduces asymmetric dimethylation of H3R2 at the promoters of genes including Ppard, Acox3, and Cpt1a, enhancing genomic accessibility for fatty acid oxidation. PRMT6 thus emerges as a metabolic checkpoint, mediating metabolic switch from fatty acid oxidation to glycolysis, thereby supporting osteoclastogenesis. Unveiling PRMT6's critical role in epigenetically orchestrating metabolic shifts in osteoclastogenesis offers a promising target for anti-resorptive therapy.
RESUMO
Multifaceted interrogation of the proteome deepens the system-wide understanding of biological systems; however, mapping the redox changes in the proteome has so far been significantly more challenging than expression and solubility/stability analyses. Here, the first high-throughput redox proteomics approach integrated with expression analysis (REX) is devised and combined with the Proteome Integral Solubility Alteration (PISA) assay. The whole PISA-REX experiment with up to four biological replicates can be multiplexed into a single tandem mass tag TMTpro set. For benchmarking this compact tool, HCT116 cells treated with auranofin are analyzed, showing great improvement compared with previous studies. PISA-REX is then applied to study proteome remodeling upon stimulation of human monocytes by interferon α (IFN-α). Applying this tool to study the proteome changes in plasmacytoid dendritic cells (pDCs) isolated from wild-type versus Ncf1-mutant mice treated with interferon α, shows that NCF1 deficiency enhances the STAT1 pathway and modulates the expression, solubility, and redox state of interferon-induced proteins. Providing comprehensive multifaceted information on the proteome, the compact PISA-REX has the potential to become an industry standard in proteomics and to open new windows into the biology of health and disease.
RESUMO
In the present study, we introduce a covalent organic triazine framework polymer (COTF-P) using 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) with triazine-based amine. The resulting dark red COTF-P illustrated potential behavior as a photocatalyst under visible light. Due to the inadequate solar energy capture and ultrafast charge recombination of the resulting COTF-P, the prepared COTF-P has been decorated with CQDs (N-CQD and N-S-CQD) to build a Z-scheme CQDs/COTF-P heterojunction photocatalyst and utilizes as photocatalyst for the breakdown of phenanthrene (PHE) exposed to visible light. The prepared COTF-P and CQDs/COTF-P were fully characterized, analyzing the textural (N2 isotherms), structural (XRD and FTIR), chemical (EDX and XPS), morphological (FESEM and TEM), optical (DRS-UV-Vis and photoluminescence), and electrochemical properties (EIS impedance, transient photocurrent, and flat band potential). The prepared N-S-CQD/COTF-P heterojunction displayed optimum activity for the photocatalytic oxidation of PHE from water, owing to an enhanced separation of the photogenerated charges and lower bandgap value, 2.1 vs. 1.9 eV. The N-S-CQD/COTF-P heterojunction showed acceptable stability in terms of activity and structural properties after 5 cycles of reuse. The mechanism of activation highlights the importance played by superoxide radicals and hydroxyl radicals. This project sheds light on the potential use of CQDs for the decoration of polymers, extending the absorbance in the visible region and boosting the migration of charge, which boosts the activity of the resulting material.
RESUMO
Aristolochic acid nephropathy (AAN) is a rapidly progressive kidney disease caused by medical or environmental exposure to aristolochic acids (AAs). This study aimed to identify serum metabolites associated with the severity of acute AAN and investigate the underlying mechanisms. Male C57BL/6 mice were treated with vehicle and 3 doses of aristolochic acid I (AAI) (1.25, 2.5, and 5â¯mg/kg/d) for 5 days by intraperitoneal injection. The results showed that AAI dose-dependently increased blood urea nitrogen (BUN) and serum creatinine (Scr) levels and renal pathological damage. Non-targeted metabolomics revealed that differences in serum metabolite profiles from controls increased with increasing AAI doses. Compared with the control group, 56 differentially expressed metabolites (DEMs) that could be affected by all 3 doses of AAI were obtained. We further identified 13 DEMs whose abundance significantly correlated with Scr and BUN levels and had good predictive values for diagnosing AAI exposure. Among the 13 DEMs, lipids and lipid-like molecules constituted the majority. Western blotting found that AAI suppressed renal fatty acid oxidation (FAO)-related enzymes expression. In conclusion, these findings provided evidence for developing biomarkers for monitoring AAs exposure and AAN diagnosis and indicated activation of FAO as a potential direction for the treatment of AAN.
RESUMO
Platinum-based catalysts that have long been used as the anodes for the formic acid electro-oxidation (FAO) in the direct formic acid fuel cells (DFAFCs) were susceptible to retrogradation in performance due to CO poisoning that impaired the technology transfer in industry. This work is designed to overcome this challenge by amending the Pt surface sequentially with nanosized cobalt (nano-CoOx, fibril texture of ca. 200 nm in particle size) and iron (nano-FeOx, nanorods of particle size and length of 80 and 253 nm, respectively) oxides. This enriched the Pt surface with oxygenated groups that boosted FAO and mitigated the CO poisoning. The unfilled d-orbitals of the transition metals and their tendency to vary their oxidations states presumed their participation in a faster mechanism of FAO. Engineering the Pt surface in this FeOx/CoOx/Pt hierarchy resulted in a remarkable activity toward FAO, that exceeded four times that of the Pt catalyst with up to ca. 2.5 times improvement in the catalytic tolerance against CO poisoning. This associated a ca. - 32 mV shift in the onset potential of FAO which increased to - 40 mV with a post-activation of the same catalyst at - 0.5 in 0.2 mol L-1 NaOH, displaying the catalyst's competitiveness in reducing overpotentials in DFAFCs. It also exhibited a favorable amelioration in the catalytic durability in long-termed chronoamperometric electrolysis. The electrochemical impedance spectroscopy and the CO stripping voltammetry were employed to elucidate the origin of enhancement.
RESUMO
In this News and Views, I discuss our recent publication that established how steroidogenic acute regulatory-related lipid transfer domain-3 (STARD3), a membrane contact protein situated at lysosomal membranes, plays a role in the detoxification of cholesterol hydroperoxide. STARD3's methionine residues can be oxidized to methionine sulfoxide by cholesterol hydroperoxide, after which methionine sulfoxide reductases reduce the methionine sulfoxide residues back to methionine. The reaction also results in the reduction of the cholesterol hydroperoxide to an alcohol. The cyclic oxidation and reduction of methionine residues in STARD3 at membrane contact sites creates a catalytically efficient mechanism for detoxification of cholesterol hydroperoxide during cholesterol transport, thus protecting membrane contact sites and the entire cell against the toxicity of cholesterol hydroperoxide.