Precisely Controlling Polymer Acceptors with Weak Intramolecular Charge Transfer Effect and Superior Coplanarity for Efficient Indoor All-Polymer Solar Cells with over 27% Efficiency.

Indoor photovoltaics (IPVs) are garnering increasing attention from both the academic and industrial communities due to the pressing demand of the ecosystem of Internet-of-Things. All-polymer solar cells (all-PSCs), emerging as a sub-type of organic photovoltaics, with the merits of great film-forming properties, remarkable morphological and light stability, hold great promise to simultaneously achieve high efficiency and long-term operation in IPV's application. However, the dearth of polymer acceptors with medium-bandgap has impeded the rapid development of indoor all-PSCs. Herein, a highly efficient medium-bandgap polymer acceptor (PYFO-V) is reported through the synergistic effects of side chain engineering and linkage modulation and applied for indoor all-PSCs operation. As a result, the PM6:PYFO-V-based indoor all-PSC yields the highest efficiency of 27.1% under LED light condition, marking the highest value for reported binary indoor all-PSCs to date. More importantly, the blade-coated devices using non-halogenated solvent (o-xylene) maintain an efficiency of over 23%, demonstrating the potential for industry-scale fabrication. This work not only highlights the importance of fine-tuning intramolecular charge transfer effect and intrachain coplanarity in developing high-performance medium-bandgap polymer acceptors but also provides a highly efficient strategy for indoor all-PSC application.

Polymerizing M-Series Acceptors for Efficient Polymer Solar Cells: Effect of the Molecular Shape.

Currently, high-performance polymerized small-molecule acceptors (PSMAs) based on ADA-type SMAs are still rare and greatly demanded for polymer solar cells (PSCs). Herein, two novel regioregular PSMAs (PW-Se and PS-Se) are designed and synthesized by using centrosymmetric (linear-shaped) and axisymmetric (banana-shaped) ADA-type SMAs as the main building blocks, respectively. It is demonstrated that photovoltaic performance of the PSMAs can be significantly improved by optimizing the configuration of ADA-type SMAs. Compared to the axisymmetric SMA-based polymer (PS-Se), PW-Se using a centrosymmetric SMA as the main building block exhibits better backbone coplanarity thereby resulting in bathochromically shifted absorption with a higher absorption coefficient, tighter interchain π-π stacking, and more favorable blend film morphology. As a result, enhanced and more-balanced charge transport, better exciton dissociation, and reduced charge recombination are achieved for PW-Se-based devices with PM6 as polymer donor. Benefiting from these positive factors, the optimal PM6:PW-Se-based device exhibits a higher power conversion efficiency (PCE) of 15.65% compared to the PM6:PS-Se-based device (8.90%). Furthermore, incorporation of PW-Se as a third component in the binary active layer of PM6:M36 yields ternary devices with an outstanding PCE of 18.0%, which is the highest value for PSCs based on ADA-type SMAs, to the best of the knowledge.

A Polymer Acceptor with Grafted Small Molecule Acceptor Unit for Efficient All Polymer Organic Solar Cells.

A polymer acceptor, named PX-1, is  designed and synthesized using a polymerization strategy with grafted small molecule acceptors. This design approach allows for the freedom of end groups while maintaining efficient terminal packing, enhancing π-π interactions, and facilitating charge transport. All-polymer organic solar cells based on PM6: PX-1 demonstrate a promising efficiency of 13.55%. The result presents an alternative pathway for the design of high-efficiency polymer acceptors through the careful regulation of small molecule acceptor monomers and linker units.

Linear Regulating of Polymer Acceptor Aggregation with Short Alkyl Chain Units Enhances All-Polymer Solar Cells' Efficiency.

The power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs) has ascended rapidly arising from the development of polymerized small-molecule acceptor materials. However, numerous insulating long alkyl chains, which ensure the solubility of the polymer, result in inferior aggregation and charge mobility. Herein, this study proposes a facile random copolymerization strategy of two small molecule acceptor units with different lengths of alkyl side chains and synthesizes a series of polymer acceptors PYT-EHx, where x is the percentage of the short alkyl chain units. The aggregation strength and charge mobility of the acceptors rise linearly with increasing the proportion of short alkyl chain units. Thus, the PYT-EH20 reaches balanced aggregation with the star polymer donor PBDB-T, resulting in optimal morphology, fastest carrier transport, and reduced recombination and energy loss. Consequently, the PYT-EH20-based device yields a 14.8% PCE, a 16% improvement over the control PYT-EH0-based device, accompanied by an increase in open-circuit voltage (Voc ), short-circuit current density (Jsc ), and fill factor (FF). This work demonstrates that the random copolymerization strategy with short alkyl chain insertion is an effective avenue for developing high-performance polymer acceptors, which facilitates further advances in the efficiency of all-PSCs.

Linker Unit Modulation of Polymer Acceptors Enables Highly Efficient Air-Processed All-Polymer Solar Cells.

A group of regioregular polymer acceptors is synthesized by polymerizing Y6 moieties with different linker units including thiophene, vinylene, 2,2'-bithiophene, and thieno[3,2-b]thiophene, and their optoelectrical properties and photovoltaic performances are studied systematically. It is found that the linker units have significant impacts on the backbone planarity, conjugation, and hence optoelectrical properties of polymer acceptors. The vinylene-based PYF-V-o polymer shows a smaller dihedral angle between the end groups and vinylene units and a more rigid polymer backbone, thus affording bathochromic absorption and better electron-transporting capacity. As a result, the PM6:PYF-V-o based all-polymer solar cells (all-PSCs) are able to achieve the highest power conversion efficiency of 16.4% with an unprecedented small voltage loss of 0.49 V. Moreover, the PM6:PYF-V-o blend exhibits good resistance to environmental stressors and the air-processed PM6:PYF-V-o cells can still maintain a high efficiency of 16.1%, which is the best air-processed all-PSC efficiency reported to date. This study provides the structural-property guidance that can be used to facilitate the development of polymer acceptors for all-PSCs.

A New Polymer Donor Enables Binary All-Polymer Organic Photovoltaic Cells with 18% Efficiency and Excellent Mechanical Robustness.

The development of polymerized small-molecule acceptors has boosted the power conversion efficiencies (PCEs) of all-polymer organic photovoltaic (OPV) cells to 17%. However, the polymer donors suitable for all-polymer OPV cells are still lacking, restricting the further improvement of their PCEs. Herein, a new polymer donor named PQM-Cl is designed and its photovoltaic performance is explored. The negative electrostatic potential and low average local ionization energy distribution of the PQM-Cl surface enable efficient charge generation and transfer process. When blending with a well-used polymer acceptor, PY-IT, the PQM-Cl-based devices deliver an impressive PCE of 18.0% with a superior fill factor of 80.7%, both of which are the highest values for all-polymer OPV cells. The relevant measurements demonstrate that PQM-Cl-based films possess excellent mechanical and flexible properties. As such, PQM-Cl-based flexible photovoltaic cells are fabricated and an excellent PCE of 16.5% with high mechanical stability is displayed. These results demonstrate that PQM-Cl is a potential candidate for all-polymer OPV cells and provide insights into the design of polymer donors for high-efficient all-polymer OPV cells.

Binary Blend All-Polymer Solar Cells with a Record Efficiency of 17.41% Enabled by Programmed Fluorination Both on Donor and Acceptor Blocks.

Despite remarkable breakthrough made by virtue of "polymerized small-molecule acceptor (PSMA)" strategy recently, the limited selection pool of high-performance polymer acceptors and long-standing challenge in morphology control impede their further developments. Herein, three PSMAs of PYDT-2F, PYDT-3F, and PYDT-4F are developed by introducing different fluorine atoms on the end groups and/or bithiophene spacers to fine-tune their optoelectronic properties for high-performance PSMAs. The PSMAs exhibit narrow bandgap and energy levels that match well with PM6 donor. The fluorination promotes the crystallization of the polymer chain for enhanced electron mobility, which is further improved by following n-doping with benzyl viologen additive. Moreover, the miscibility is also improved by introducing more fluorine atoms, which promotes the intermixing with PM6 donor. Among them, PYDT-3F exhibits well-balanced high crystallinity and miscibility with PM6 donor; thus, the layer-by-layer processed PM6/PYDT-3F film obtains an optimal nanofibril morphology with submicron length and ≈23 nm width of fibrils, facilitating the charge separation and transport. The resulting PM6/PYDT-3F devices realizes a record high power conversion efficiency (PCE) of 17.41% and fill factor of 77.01%, higher than the PM6/PYDT-2F (PCE = 16.25%) and PM6/PYDT-4F (PCE = 16.77%) devices.

Vinylene-Inserted Asymmetric Polymer Acceptor with Absorption Approaching 1000 nm for Versatile Applications in All-Polymer Solar Cells and Photomultiplication-Type Polymeric Photodetectors.

The emerging polymerized small-molecule acceptors (PSMAs) with near-infrared (NIR) absorption have not only significantly boosted the power conversion efficiencies (PCEs) of all-polymer solar cells (all-PSCs) but have also exhibited great potential for sensitive NIR polymeric photodetectors (PPDs). However, there is no report regarding PSMAs with photo-response that can approach 1000 nm, which is an important criterion for applications in NIR-responsive all-PSCs and PPDs. Herein, by unidirectionally inserting vinylene segments into a selenophene-rich polymer backbone to improve the electron-donating strength and quinoidal character, an asymmetric PSMA, namely, PY3Se-1V, was developed, which showed an extensively red-shifted absorption approaching 1000 nm. The PBDB-T:PY3Se-1V-based binary all-PSCs achieve a decent PCE of 13.2% and a record-high photocurrent density of 25.9 mA cm-2 due to the significantly broadened photo-response and efficient photon-to-electron conversion. More encouragingly, narrowband photomultiplication (PM)-type PPDs based on poly(3-hexylthiophene-2,5-diyl) (P3HT):PY3Se-1V were developed, delivering an exceptionally high external quantum efficiency of 3680% and a responsivity of 28 A W-1 at an NIR peak of 960 nm under -50 V bias, which is reported for the first time in PM-type PPDs with a response approaching 1000 nm.

Side-Chain Substituents on Benzotriazole-Based Polymer Acceptors Affecting the Performance of All-Polymer Solar Cells.

Recently, the strategy of polymerized small-molecule acceptors (PSMAs) has attracted extensive attention for applications in all-polymer solar cells (all-PSCs). Although side-chain engineering is considered as a simple and effective strategy for manipulating polymer properties, the corresponding effect on photovoltaic performance of PSMAs in all-PSCs has not been systemically investigated. Herein, a series of PSMAs based on the benzotriazole (BTz)-core fused SMAs with different N-alkyl chains including branched 2-butyloctyl, linear n-octyl, and methyl on the BTz unit, namely PZT-C12, PZT-C8, and PZT-C1, respectively, is presented. Comparative studies show that the size of alkyl chains has a significant impact on the solid-state behavior of PZT polymers, which in turn affects their light absorption and charge transporting capacities, and subsequently the all-PSC performances. When combining with the polymer donor PBDB-T, PZT-C1 affords a champion power conversion efficiency of 14.9%, compared to 13.1% of PZT-C12, and 13.8% of PZT-C8 in the resultant all-PSCs, mainly benefiting from its better crystallinity and the more favorable blend morphology. This work emphasizes the importance of optimizing side-chain substituents on PSMAs for improving the device efficiency of all-PSCs.

A Vinylene-Linker-Based Polymer Acceptor Featuring a Coplanar and Rigid Molecular Conformation Enables High-Performance All-Polymer Solar Cells with Over 17% Efficiency.

State-of-art Y-series polymer acceptors are typically based on a mono-thiophene linker, which can cause some twisted molecular conformations and thus limit the performance of all-polymer solar cells (all-PSCs). Here, a high-performance polymer acceptor based on vinylene linkers is reported, which leads to surprising changes in the polymers' molecular conformations, optoelectronic properties, and enhanced photovoltaic performance. It is found that the polymer acceptors based on thiophene or bithiophene linkers (PY-T-γ and PY-2T-γ) display significant molecular twisting between end-groups and linker units, while the vinylene-based polymer (PY-V-γ) exhibits a more coplanar and rigid molecular conformation. As a result, PY-V-γ demonstrates a better conjugation and tighter interchain stacking, which results in higher mobility and a reduced energetic disorder. Furthermore, detailed morphology investigations reveal that the PY-V-γ-based blend exhibits high domain purity and thus a better fill factor in its all-PSCs. With these, a higher efficiency of 17.1% is achieved in PY-V-γ-based all-PSCs, which is the highest efficiency reported for binary all-PSCs to date. This work demonstrates that the vinylene-linker is a superior unit to build polymer acceptors with more coplanar and rigid chain conformation, which is beneficial for polymer aggregation and efficient all-PSCs.

Polymer Acceptors for High-Performance All-Polymer Solar Cells.

All-polymer solar cells (all-PSCs) have attracted considerable attention owing to their pronounced advantages of excellent mechanical flexibility/stretchability and greatly enhanced device stability as compared to other types of organic solar cells (OSCs). Thanks to the extensive research efforts dedicated to the development of polymer acceptors, all-PSCs have achieved remarkable improvement of photovoltaic performance, recently. This review summarizes the recent progress of polymer acceptors based on the key electron-deficient building blocks, which include bithiophene imide (BTI) derivatives, boron-nitrogen coordination bond (B←N)-incorporated (hetero)arenes, cyano-functionalized (hetero)arenes, and fused-ring electron acceptors (FREAs). In addition, single-component-based all-PSCs are also briefly discussed. The structure-property correlations of polymer acceptors are elaborated in detail. Finally, we offer our insights into the development of new electron-deficient building blocks with further optimized properties and the polymers built from them for efficient all-PSCs.

Tailoring polymer acceptors by electron linkers for achieving efficient and stable all-polymer solar cells.

The trade-off between efficiency and stability is a bit vague, and it can be tricky to precisely control the bulk morphology to simultaneously improve device efficiency and stability. Herein, three fused-ring conducted polymer acceptors containing furan, thiophene and selenophene as the electron linkers in their conjugated backbones, namely PY-O, PY-S and PY-Se, were designed and synthesized. The electron linker engineering affects the intermolecular interactions of relative polymer acceptors and their charge transport properties. Furthermore, excellent material compatibility was achieved when PY-Se was blended with polymer donor PBDB-T, resulting in nanoscale domains with favorable phase separation. The optimized PBDB-T : PY-Se blend not only exhibits maximum performance with a power conversion efficiency of 15.48%, which is much higher than those of PBDB-T : PY-O (9.80%) and PBDB-T : PY-S (14.16%) devices, but also shows better storage and operational stabilities, and mechanical robustness. This work demonstrates that precise modification of electron linkers can be a practical way to simultaneously actualize molecular crystallinity and phase miscibility for improving the performance of all-polymer solar cells, showing practical significance.

Molecular Optimization on Polymer Acceptor Enables Efficient All-Polymer Solar Cell with High Open-Circuit Voltage of 1.10 V.

Currently, rational design of polymer acceptors is desirable but there is still a challenge to develop high-performance all-polymer solar cells (all-PSCs). In this work, brominated thienyl-fused malononitrile-based monomer is employed to copolymerize with indacenodithiophene (IDT) and benzodithiophene (BDT)-based linking units to develop two polymerized small molecule acceptors (PSMAs) PIDT and PBDT, respectively, for all-PSCs. The two PSMAs show similar absorption edges, while PBDT shows a slightly higher lowest unoccupied molecular orbital (LUMO) energy level than PIDT. Benefitted from the relatively high LUMO levels of the two polymer acceptors, notable open-circuit voltage (Voc ) values over 1.0 V are achieved when using them as acceptor to blend with PTQ10 as polymer donor. Particularly, the all-PSC based on PTQ10:PIDT demonstrates a power conversion efficiency of 10.19%, with an outstanding Voc of 1.10 V benefitted from the higher LUMO energy level of PIDT acceptor. The results demonstrate a feasible strategy to design PSMAs by selecting appropriate linking units for increasing the Voc and improving the efficiency of all-PSCs.

Polymerized Small Molecular Acceptor with Branched Side Chains for All Polymer Solar Cells with Efficiency over 16.7.

The power conversion efficiencies (PCEs) of small molecule acceptor (SMA)-based organic solar cells have already exceeded 18%. However, the development of polymer acceptors still lags far behind their SMA counterparts mainly due to the lack of efficient polymer acceptors. Herein, a series of polymer acceptors named PY-X (with X being the branched alkyl chain) are designed and synthesized by employing the same central core with the SMA L8-BO but with different branched alkyl chains on the pyrrole motif. It is found that the molecular packing of SMA-HD featuring 2-hexyldecyl side chain used in the synthesis of PY-HD is similar to L8-BO, in which the branched alkyl chains lead to condensed and high-order molecular assembly in SMA-HD molecules. When combined with PM6, PY-HD-based all polymer solar cell (all-PSC) exhibits a high PCE of 16.41%, representing the highest efficiency for the binary all-PSCs. Moreover, the side-chain modification on the pyrrole site position further improves the performance of the all-PSCs, and the PY-DT-based device delivers a new record high efficiency of 16.76% (certified as 16.3%). The work provides new insights for understanding the structure-property relationship of polymer acceptors and paves a feasible avenue to develop efficient conjugated polymer acceptors.

Polymer Acceptors with Flexible Spacers Afford Efficient and Mechanically Robust All-Polymer Solar Cells.

High efficiency and mechanical robustness are both crucial for the practical applications of all-polymer solar cells (all-PSCs) in stretchable and wearable electronics. In this regard, a series of new polymer acceptors (PA s) is reported by incorporating a flexible conjugation-break spacer (FCBS) to achieve highly efficient and mechanically robust all-PSCs. Incorporation of FCBS affords the effective modulation of the crystallinity and pre-aggregation of the PA s, and achieves the optimal blend morphology with polymer donor (PD ), increasing both the photovoltaic and mechanical properties of all-PSCs. In particular, an all-PSC based on PYTS-0.3 PA incorporated with 30% FCBS and PBDB-T PD demonstrates a high power conversion efficiency (PCE) of 14.68% and excellent mechanical stretchability with a crack onset strain (COS) of 21.64% and toughness of 3.86 MJ m-3 , which is significantly superior to those of devices with the PA without the FCBS (PYTS-0.0, PCE = 13.01%, and toughness = 2.70 MJ m-3 ). To date, this COS is the highest value reported for PSCs with PCEs of over 8% without any insulating additives. These results reveal that the introduction of FCBS into the conjugated backbone is a highly feasible strategy to simultaneously improve the PCE and stretchability of PSCs.

N-Type Quinoidal Polymers Based on Dipyrrolopyrazinedione for Application in All-Polymer Solar Cells.

Conjugated molecules and polymers with intrinsic quinoidal structure are promising n-type organic semiconductors, which have been reported for application in field-effect transistors and thermoelectric devices. In principle, the molecular and electronic characteristics of quinoidal polymers can also enable their application in organic solar cells. Herein, two quinoidal polymers, named PzDP-T and PzDP-ffT, based on dipyrrolopyrazinedione were synthesized and used as electron acceptors in all-polymer solar cells (all-PSCs). Both PzDP-T and PzDP-ffT showed suitable energy levels and wide light absorption range that extended to the near-infrared region. When combined with the polymer donor PBDB-T, the resulting all-PSCs based on PzDP-T and PzDP-ffT exhibited a power conversion efficiency (PCE) of 1.33 and 2.37 %, respectively. This is the first report on the application of intrinsic quinoidal conjugated polymers in all-PSCs. The photovoltaic performance of the all-PSCs was revealed to be mainly limited by the relatively poor and imbalanced charge transport, considerable charge recombination. Detailed investigations on the structure-performance relationship suggested that synergistic optimization of light absorption, energy levels, and charge transport properties is needed to achieve more successful application of intrinsic quinoidal conjugated polymers in all-PSCs.

Multi-Selenophene-Containing Narrow Bandgap Polymer Acceptors for All-Polymer Solar Cells with over 15 % Efficiency and High Reproducibility.

All-polymer solar cells (all-PSCs) progressed tremendously due to recent advances in polymerized small molecule acceptors (PSMAs), and their power conversion efficiencies (PCEs) have exceeded 15 %. However, the practical applications of all-PSCs are still restricted by a lack of PSMAs with a broad absorption, high electron mobility, low energy loss, and good batch-to-batch reproducibility. A multi-selenophene-containing PSMA, PFY-3Se, was developed based on a selenophene-fused SMA framework and a selenophene π-spacer. Compared to its thiophene analogue PFY-0Se, PFY-3Se shows a ≈30 nm red-shifted absorption, increased electron mobility, and improved intermolecular interaction. In all-PSCs, PFY-3Se achieved an impressive PCE of 15.1 % with both high short-circuit current density of 23.6 mA cm-2 and high fill factor of 0.737, and a low energy loss, which are among the best values in all-PSCs reported to date and much better than PFY-0Se (PCE=13.0 %). Notably, PFY-3Se maintains similarly good batch-to-batch properties for realizing reproducible device performance, which is the first reported and also very rare for the PSMAs. Moreover, the PFY-3Se-based all-PSCs show low dependence of PCE on device area (0.045-1.0 cm2 ) and active layer thickness (110-250 nm), indicating the great potential toward practical applications.

Novel High-Efficiency Polymer Acceptors via Random Ternary Copolymerization Engineering Enables All-Polymer Solar Cells with Excellent Performance and Stability.

Continuous breakthroughs have been achieved in improving the efficiency of all-polymer solar cells (all-PSCs) using diimide-based polymer acceptors, and their easy-to-synthesize, low-cost, and high stability attributes make them potential candidates for use in commercial all-PSCs. However, their low light absorption coefficient, strong aggregation, and poor adaptability with high-efficient polymer donors still limit further improvements in the device performance. Here, we combine the advantages of fluorinated bithiophene and rhodanine dye molecules to create low-cost diimide-based polymer acceptors, PNDI-2FT-TR10 and PNDI-2FT-TR20, by random copolymerization for achieving highly efficient and stable all-PSCs. The synergistic effects of fluorine atoms and rhodanine dye molecules not only significantly improve the absorption coefficient but also enable enhanced miscibility and stability of the blend film. When blended with a PM6 donor, the PNDI-2FT-TR10-based device exhibits a notable power conversion efficiency (PCE) of 10.71% with a short-circuit current (JSC) of 17.32 mA cm-2. Note that both the PCE and JSC show outstanding values for diimide-based all-PSCs, and this is the first report on blending diimide-based polymer acceptors with the PM6 donor to achieve high-performance all-PSCs. Moreover, the favorable morphology of the active layer enables the device to have good thickness tolerance and thermal stability. The results demonstrate that the absorption coefficients, blend morphology, and photovoltaic properties of all-PSCs could be rationally optimized by a random copolymer.