Self-Organization of Polyurethane Ionomers Based on Organophosphorus-Branched Polyols.

Based on organophosphorus branched polyols (AEPAs) synthesized using triethanolamine (TEOA), ortho-phosphoric acid (OPA), and polyoxyethylene glycol with MW = 400 (PEG), vapor-permeable polyurethane ionomers (AEPA-PEG-PUs) were obtained. During the synthesis of AEPAs, the reaction of the OPA etherification with polyoxyethylene glycol was studied in a wide temperature range and at different molar ratios of the starting components. It turned out that OPA simultaneously undergoes a catalytically activated etherification reaction with triethanolamine and PEG. After TEOA is fully involved in the etherification reaction, excess OPA does not react with the terminal hydroxyl groups of AEPA-PEG or the remaining amount of PEG. The ortho-phosphoric acid remaining in an unreacted state is involved in associative interactions with the phosphate ions of the AEPA. Increasing the synthesis temperature from 40 °C to 110 °C leads to an increase in OPA conversion. However, for the AEPA-PEG-PU based on AEPA-PEG obtained at 100 °C and 110 °C, ortho-phosphoric acid no longer enters into associative interactions with the phosphate ions of the AEPA. Due to the hydrophilicity of polyoxyethylene glycol, the presence of phosphate ions in the polyurethane structure, and their associative binding with the unreacted ortho-phosphoric acid, the diffusion of water molecules in polyurethanes is enhanced, and high values of vapor permeability and tensile strength were achieved.

Recent Advances in Environment-Friendly Polyurethanes from Polyols Recovered from the Recycling and Renewable Resources: A Review.

Polyurethane (PU) is among the most universal polymers and has been extensively applied in many fields, such as construction, machinery, furniture, clothing, textile, packaging and biomedicine. Traditionally, as the main starting materials for PU, polyols deeply depend on petroleum stock. From the perspective of recycling and environmental friendliness, advanced PU synthesis, using diversified resources as feedstocks, aims to develop versatile products with excellent properties to achieve the transformation from a fossil fuel-driven energy economy to renewable and sustainable ones. This review focuses on the recent development in the synthesis and modification of PU by extracting value-added monomers for polyols from waste polymers and natural bio-based polymers, such as the recycled waste polymers: polyethylene terephthalate (PET), PU and polycarbonate (PC); the biomaterials: vegetable oil, lignin, cashew nut shell liquid and plant straw; and biomacromolecules: polysaccharides and protein. To design these advanced polyurethane formulations, it is essential to understand the structure-property relationships of PU from recycling polyols. In a word, this bottom-up path provides a material recycling approach to PU design for printing and packaging, as well as biomedical, building and wearable electronics applications.

Development and Application of a Lignin-Based Polyol for Sustainable Reactive Polyurethane Adhesives Synthesis.

In response to the environmental impacts of conventional polyurethane adhesives derived from fossil fuels, this study introduces a sustainable alternative utilizing lignin-based polyols extracted from rice straw through a process developed at INESCOP. This research explores the partial substitution of traditional polyols with lignin-based equivalents in the synthesis of reactive hot melt polyurethane adhesives (HMPUR) for the footwear industry. The performance of these eco-friendly adhesives was rigorously assessed through Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), rheological analysis, and T-peel tests to ensure their compliance with relevant industry standards. Preliminary results demonstrate that lignin-based polyols can effectively replace a significant portion of fossil-derived polyols, maintaining essential adhesive properties and marking a significant step towards more sustainable adhesive solutions. This study not only highlights the potential of lignin in the realm of sustainable adhesive production but also emphasises the valorisation of agricultural by-products, thus aligning with the principles of green chemistry and sustainability objectives in the polymer industry.

A gluten-free diet for endometriosis patients lacks evidence to recommend it.

Endometriosis is an estrogen-dependent chronic disease characterized by the presence of endometriumlike tissue outside the uterus and is often associated with symptoms, such as dysmenorrhea, dysuria, dyschezia, chronic pelvic pain, and infertility. Moreover, women diagnosed with endometriosis can report gastrointestinal symptoms, including bloating, constipation or diarrhea, and abdominal cramping, which can be associated with irritable bowel syndrome and can result in the misdiagnosis of endometriosis as irritable bowel syndrome at first. Treatment usually involves hormonal therapy, pain management, surgery, and/or assisted reproductive techniques in case of infertility. Nonetheless, these treatment methods can be insufficient for alleviating symptoms or can have unacceptable side effects, leading to noncompliance. Therefore, women often apply self-management strategies, including dietary interventions. One of the diets frequently suggested as a tool to manage endometriosis-related symptoms on social media and patient forums is a gluten-free diet. Although a gluten-free diet has been proven effective in managing nonceliac wheat sensitivity or celiac disease, its effectiveness in endometriosis remains uncertain. The Nurses' Health Study II found it unlikely that gluten intake was a strong factor in endometriosis etiology and symptomatology. To the best of our knowledge, the most frequently cited and sole published intervention study on the efficacy of a gluten-free diet for endometriosis has several important limiting factors, including the absence of a control group. In addition, gluten consumption is highly susceptible to a placebo effect and a nocebo effect, where women might experience symptom relief after eliminating gluten and return of symptoms after they consume gluten again, solely because they believe that gluten is bad for them. Despite the inverse association between body mass index and endometriosis and between a gluten-free diet and increased body mass index, this is an association, and no causality was proven. In addition, other factors should be taken into consideration. Of note, a gluten-free diet is expensive, has limited availability, and has a significant effect on quality of life. Moreover, without proper dietary guidance, it may adversely affect the gastrointestinal microbiome. Therefore, scientifically substantiated advice regarding the use of a gluten-free diet for endometriosis-related symptoms is currently not available, and a gluten-free diet should be discouraged unless there is an additional diagnosis of nonceliac wheat sensitivity or celiac disease.

Diffusion in biological media: a comprehensive numerical-analytical study via surface analysis and diffusivities calculation.

The study of diffusion in biological materials is crucial for fields like food science, engineering, and pharmaceuticals. Research that combines numerical and analytical methods is needed to better understand diffusive phenomena across various dimensions and under variable boundary conditions within food matrices. This study aims to bridge this gap by examining the diffusion of substances through biological materials analytically and numerically, calculating diffusivity and conducting surface analysis. The research proposes a process for sweetening Bing-type cherries (Prunus avium) using sucrose/xylitol solutions and a staining technique utilising erythrosine and red gardenia at varying concentrations (119, 238 and 357 ppm) and temperatures (40, 50 and 60 °C). Given the fruit's epidermis resistance, the effective diffusivities of skin were inferior to those in flesh. Temperature and concentration synergise in enhancing diffusion coefficients and dye penetration within the food matrix (357 ppm and 60 °C). Red gardenia displayed significant temperature-dependent variation (p = 0.001), whereas erythrosine dye remained stable by temperature changes (p > 0.05). Gardenia's effective diffusivities in cherry flesh and skin, at 357 ppm and 60 °C, 3.89E-08 and 6.61E-09 m2/s, respectively, significantly differed from those obtained at lower temperatures and concentrations. The results highlight the temperature-concentration impacts on mass transfer calculations for food colouring processes and preservation methodologies.

Stabilization of Eversa® Transform 2.0 lipase with sorbitol to enhance the efficiency of ultrasound-assisted biodiesel production.

Ultrasound technology has emerged as a promising tool for enhancing enzymatic biodiesel production, yet the cavitation effect induced can compromise enzyme stability. This study explored the efficiency of polyols in enhancing lipase stability under ultrasound conditions to further improve biodiesel yield. The incorporation of sorbitol resulted in the highest fatty acid methyl ester (FAME) content in the ultrasound-assisted biodiesel production catalyzed by Eversa® Transform 2.0 among the investigated polyols. Furthermore, sorbitol enhanced the stability of the lipase, allowing it to tolerate up to 100 % ultrasound amplitude, compared to 60 % amplitude in its absence. Enzyme activity assays revealed that sorbitol preserved 99 % of the lipase activity, in contrast to 84 % retention observed without sorbitol under an 80 % ultrasound amplitude. Circular dichroism (CD) and fluorescence spectroscopy analyses confirmed that sorbitol enhanced lipase rigidity and preserved its conformational structure under ultrasound exposure. Furthermore, employing a stepwise methanol addition strategy in ultrasound-assisted reactions with sorbitol achieved an 81.2 wt% FAME content in 8 h with only 0.2 wt% enzyme concentration. This promising result highlights the potential of sorbitol as a stabilizing agent in ultrasound-assisted enzymatic biodiesel production, offering a viable approach for enhancing biodiesel yield and enzyme stability in industrial applications.

Exploration of Trichoderma reesei as an alternative host for erythritol production.

BACKGROUND: Erythritol, a natural polyol, is a low-calorie sweetener synthesized by a number of microorganisms, such as Moniliella pollinis. Yet, a widespread use of erythritol is limited by high production costs due to the need for cultivation on glucose-rich substrates. This study explores the potential of using Trichoderma reesei as an alternative host for erythritol production, as this saprotrophic fungus can be cultivated on lignocellulosic biomass residues. The objective of this study was to evaluate whether such an alternative host would lead to a more sustainable and economically viable production of erythritol by identifying suitable carbon sources for erythritol biosynthesis, the main parameters influencing erythritol biosynthesis and evaluating the feasibility of scaling up the defined process. RESULTS: Our investigation revealed that T. reesei can synthesize erythritol from glucose but not from other carbon sources like xylose and lactose. T. reesei is able to consume erythritol, but it does not in the presence of glucose. Among nitrogen sources, urea and yeast extract were more effective than ammonium and nitrate. A significant impact on erythritol synthesis was observed with variations in pH and temperature. Despite successful shake flask experiments, the transition to bioreactors faced challenges, indicating a need for further scale-up optimization. CONCLUSIONS: While T. reesei shows potential for erythritol production, reaching a maximum concentration of 1 g/L over an extended period, its productivity could be improved by optimizing the parameters that affect erythritol production. In any case, this research contributes valuable insights into the polyol metabolism of T. reesei, offering potential implications for future research on glycerol or mannitol production. Moreover, it suggests a potential metabolic association between erythritol production and glycolysis over the pentose phosphate pathway.

Polyols induce acute oxidative stress and mortality in Indian malaria vector Anopheles stephensi (Diptera: Culicidae): potential for use as sugar-cum-toxin source in toxic sugar baits.

BACKGROUND: Development of insecticide resistance in the major malaria vectors has necessitated the development of novel vector control tools. One such strategy involves the use of toxic sugar baits that targets the sugar-feeding behaviour of mosquito vectors. In this study, we investigated the potential of polyols, as a toxic food (sugar) source in toxic sugar baits against the malaria vector Anopheles stephensi Liston. We examined the acute toxicity of six polyols, namely, erythritol, glycerol, mannitol, propylene glycol (PG), sorbitol, and xylitol on adult female An. stephensi mosquitoes at two different concentrations - 2% and 10%. We also studied changes in fecundity, egg hatchability and mid-gut peroxide levels induced by polyol exposure. RESULTS: Among the six polyol compounds tested, PG was most toxic and lethal followed by glycerol and erythritol (P < 0.001) compared to the control (sucrose). PG induced acute mortality at different tested concentrations. In the erythritol- and glycerol-fed groups, a dose-dependent effect on mortality was observed. Glycerol evidently reduced fecundity and egg-hatchability in gonotrophic cycles G1 and G2. Sucrose was the preferred food source (48%), followed by erythritol (18%), PG (10%) and glycerol (8%). Ingestion of polyols increased peroxide levels in mosquito guts, which persisted for extended durations ultimately resulting in rapid mortality (P < 0.05). CONCLUSION: The present study highlights the usefulness of sugar polyols for the development of toxic sugar baits with minimal yet effective ingredients. Further research could be focused on field experiments and on the exploration of synergistic effects of different polyols for optimization of field applications. © 2024 Society of Chemical Industry.

Cellulose-Based Polyurethane Foams of Low Flammability.

Decreasing oil resources creates the need to search for raw materials in the biosphere, which can be converted into polyols suitable for obtaining polyurethane foams (PUF). One such low-cost and reproducible biopolymer is cellulose. There are not many examples of cellulose-derived polyols due to the sluggish reactivity of cellulose itself. Recently, cellulose and its hydroxypropyl derivatives were applied as source materials to obtain polyols, further converted into biodegradable rigid polyurethane foams (PUFs). Those PUFs were flammable. Here, we describe our efforts to modify such PUFs in order to decrease their flammability. We obtained an ester from diethylene glycol and phosphoric(III) acid and used it as a reactive flame retardant in the synthesis of polyol-containing hydroxypropyl derivative of cellulose. The cellulose-based polyol was characterized by infrared spectra (IR) and proton nuclear magnetic resonance (1H-NMR) methods. Its properties, such as density, viscosity, surface tension, and hydroxyl numbers, were determined. Melamine was also added to the foamed composition as an additive flame retardant, obtaining PUFs, which were characterized by apparent density, water uptake, dimension stability, heat conductance, compressive strength, and heat resistance at 150 and 175 °C. Obtained rigid PUFs were tested for flammability by determining oxygen index, horizontal flammability test, and calorimetric analysis. Obtained rigid PUFs showed improved flammability resistance in comparison with non-modified PUFs and classic PUFs.

Synthesis and utilization of polyol-modified high specific surface area Ca(OH)2: an investigation.

Calcium hydroxide (Ca(OH)2) finds widespread use in the petrochemical industry, particularly in flue gas desulfurization applications. However, its conventional usage is limited by its inherently low specific surface area, hampering its efficiency. To address this limitation, this study aims to develop a simple and industrially scalable preparation process for Ca(OH)2 with a high specific surface area, thereby enhancing its effectiveness in various applications. This study aimed to develop a preparation process for making Ca(OH)2 with a high specific surface area, suitable for industry and easy to make. Ca(OH)2 with a specific surface area of 41.555 m2/g was successfully synthesized by incorporating polyols during lime digestion. The prepared high specific surface area Ca(OH)2 is more than five times the specific surface area of ordinary Ca(OH)2. Incorporation of polyols within the lime digestion process induces a reduction in both Ca(OH)2 grain size and particle dimensions, concurrently amplifying the specific surface area and optimizing mass transfer efficiency. Specifically, the desulfurization breakthrough time for Ca(OH)2 subject to a 15% triethanolamine modification was notably extended to 879 s, surpassing the desulfurization breakthrough time of unaltered Ca(OH)2 by more than tenfold. Moreover, the modified Ca(OH)2 exhibited remarkable efficacy in neutralizing acidic wastewater. A new approach for the preparation of high-performance Ca(OH)2 is proposed in this study, which could facilitate the industrial production of Ca(OH)2 with high specific surface area.

A flexible modulated pesticide release platform through poly(urethane-urea) microcapsules: effect of different crosslinkers compositions.

BACKGROUND: Polymeric microcapsules (MCs) have become an important issue and have attracted increasing attention because of their tunable physical and chemical properties. Diverse shell structures can confer multiple properties on MCs. RESULTS: Different polyols (1,4-butanediol and glycerin) and polyamines (triethylenetetramine and isophorondiamine) were selected as crosslinkers to obtain emamectin benzoate (EB)-loaded poly(urethane-urea) MCs (PU-MCs) by interfacial polymerization. The four obtained PU-MCs showed sphericity with different degrees of smoothness on their surfaces, and displayed a uniform size distribution ranging from 500 to 700 nm. Moreover, transmission electron microscopy showed that the shell thickness was roughly uniform, and was greatly influenced by the type and structure of the crosslinker. GI-MCs, prepared using glycerin and isophorondiamine, had the largest shell thickness. GT-MCs, obtained using glycerin and triethylenetetramine, had the highest encapsulation efficiency and drug-loading content, and BT-MCs, obtained using mixtures of 1,4-butanediol and triethylenetetramine, had the fastest release behavior. Thermogravimetric analysis revealed that the greater the degree of shell crosslinking, the higher decomposition temperature and the greater the thermal stability. A BT-MC suspension had the lowest viscosity and contact angle with the best wettability. Bioassay experiments showed that BT-MCs exhibited good insecticidal activity against Plutella xylostella larvae with a half-maximal lethal concentration of 4.19 mg/L. Furthermore, a BT-MC suspension showed good thermal and light stability, with potential applications in minimizing the toxicity of EB through sustained release. CONCLUSION: Various properties of EB-loaded PU-MCs were modulated through simple selection of different polyols and polyamines during fabrication, which might have an important role in constructing the pesticide delivery system and improving pesticide utilization. © 2024 Society of Chemical Industry.

Regulating Lateral Adsorbate Interaction for Efficient Electroreforming of Bio-polyols.

Tailoring the selectivity at the electrode-electrolyte interface is one of the greatest challenges for heterogeneous electrocatalysis, and complementary strategies to catalyst structural designs need to be developed. Herein, we proposed a new strategy of controlling the electrocatalytic pathways by lateral adsorbate interaction for the bio-polyol oxidation. Redox-innocent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) anion possesses the alcoholic property that facilely adsorbs on the nickel oxyhydroxide catalyst, but is resistant to oxidation due to the electron-withdrawing trifluoromethyl groups. The alien HFIP adsorbents can compete with bio-polyols and form a mixed adsorbate layer that creates lateral adsorbate interaction via hydrogen bonding, which achieved a >2-fold enhancement of the oxalate selectivity to 55 % for the representative glycerol oxidation and can be extended to various bio-polyol substrates. Through in situ spectroscopic analysis and DFT calculation on the glycerol oxidation, we reveal that the hydrogen-bonded adsorbate interaction can effectively tune the adsorption energies and tailor the oxidation capabilities toward the targeted products. This work offers an additional perspective of tuning electrocatalytic reactions via introducing redox-innocent adsorbates to create lateral adsorbate interactions.

Synthesis of Polyether, Poly(Ether Carbonate) and Poly(Ether Ester) Polyols Using Double Metal Cyanide Catalysts Bearing Organophosphorus Complexing Agents.

We developed a series of Zn(II)-Co(III) double metal cyanide (DMC) catalysts with exceptional activity for the ring-opening polymerization of various cyclic monomers by employing diverse organophosphorus compounds as complexing agents (CAs). The chemical structure and composition of DMC catalysts were investigated by commonly used analysis such as infrared and X-ray photoelectron spectroscopies, and elemental analysis combining with in situ NMR analysis to determine the complexation types of organophosphorus compounds the catalyst framework. The resulting catalysts exhibited very high turnover frequencies (up to 631.4 min-1) in the ring-opening polymerization (ROP) of propylene oxide and good efficiency for the ROP of ε-caprolactone. The resultant polyester polyols are suitable to use as an macroinitiator to produce well-defined poly(ester ether) triblock copolymers of 1800-6600 g mol-1 and dispersity of 1.16-1.37. Additionally, the DMC catalysts bearing organophosphorus compounds CAs exhibited remarkable selectivity for the copolymerization of PO with CO2, yielding poly(ether carbonate) polyols with carbonate contents up to 34.5%. This study contributes to the development of efficient DMC catalytic systems that enable the synthesis of high-quality polyols for various applications.

Regulating Crystal Orientation in VO2 for Aqueous Zinc Batteries with Enhanced Pseudocapacitance.

Although aqueous zinc batteries have attracted extensive interest, they are limited by relatively low rate capabilities and poor cyclic stability of cathodes. The crystal orientation of the cathode is one important factor influencing electrochemical properties. However, it has rarely been investigated. Herein, VO2 cathodes with different crystal orientations are developed via tuning the number of hydroxyl groups in polyol, such as using glycerol, erythritol, xylitol, or mannitol. The polyols serve as a reductant as well as a structure-directing agent through a hydrothermal reaction. Xylitol-derived VO2 shows a (110)-orientated crystalline structure and ultrathin nanosheet morphology. Such features greatly enhance the pseudocapacitance to 76.1% at a scan rate of 1.0 mV s-1, which is significantly larger than that (61.6%) of the (001)-oriented VO2 derived from glycerol. The corresponding aqueous zinc batteries exhibit a high energy storage performance with a reversible specific capacity of 317 mAh g-1 at 0.5 A g-1, rate ability of 220 mAh g-1 at 10 A g-1, and capacity retention of 81.0% at 10 A g-1 over 2000 cycles. This work demonstrates a facile method for tailoring VO2 crystal orientations, offers an understanding of the Zn2+ storage mechanism upon different VO2 facets, and provides a novel method to develop cathode materials toward advanced aqueous zinc batteries.

Maternal Serum Polyols and Its Link to Gestational Diabetes Mellitus: A Population-Based Nested Case-Control Study.

CONTEXT: Sugar alcohols (also called polyols) are regarded as a "healthy" sugar substitute. One of the possible reasons for their safe use in pregnant women is their natural origin and the presence of polyols in maternal and fetal samples during normal human gestation. But little is known about the association between circulating sugar alcohols levels and maternal metabolic disorders during pregnancy. OBJECTIVE: We aimed to detect the concentration of the polyols in participants with and without gestational diabetes mellitus (GDM), and to investigate the association between maternal serum levels of polyols and GDM, as well as newborn outcomes. METHODS: A nested population-based case-control study was conducted in 109 women with and without GDM. Maternal concentrations of serum erythritol, sorbitol, and xylitol in the fasting state were quantified using a time of flight mass spectrometry system. RESULT: In women with GDM, serum concentrations of erythritol and sorbitol were higher, but serum concentrations of xylitol were lower than those in women without GDM. Per 1-SD increment of Box-Cox-transformed concentrations of erythritol and sorbitol were associated with the increased odds of GDM by 43% and 155% (95% CI 1.07-1.92 and 95% CI 1.77-3.69), while decreased odds were found for xylitol by 25% (95% CI 0.57-1.00). Additionally, per 1-SD increase of Box-Cox-transformed concentrations of serum sorbitol was associated with a 52% increased odds of large for gestational age newborns controlling for possible confounders (95% CI 1.00-2.30). CONCLUSION: Maternal circulating sugar alcohols levels during pregnancy were significantly associated with GDM. These findings provide the potential roles of polyols on maternal metabolic health during pregnancy.

Treatment of functional bowel disorders in an integrative medicine clinic resulting in improved digestive tract symptoms.

Background and Aim: Functional bowel disorders (FBDs), including irritable bowel syndrome (IBS) and others, are conditions without a physically identifiable etiology that, as a result, are difficult to treat. Alternatives to traditional medical interventions are needed because IBS patients require more of physician time and higher healthcare spending. The goal of this study was to determine the efficacy of alternative lifestyle interventions for patients with FBDs seen in an integrative medicine (IM) clinic at an academic medical center. Methods: We performed a retrospective chart review to determine whether patients with FBDs had improvement in symptoms following predominantly nutrition-based IM interventions that included recommendations for dietary supplements and elimination diets. We measured symptoms before and after intervention (average time between measurements 8.75 months) using a medical symptoms questionnaire (MSQ) commonly used to quantify symptom change in IM clinics. Results: Digestive tract symptoms, as measured by the MSQ, improved significantly in patients (n = 57) with FBDs following IM intervention. The MSQ Digestive Tract subtotal for FBD patients decreased from 10.2 (SD, 5.4) to 7.2 (SD, 5.2) (P < 0.001) after IM intervention. Conclusions: Patients in an IM clinic had improved digestive tract symptoms scores following IM intervention. Because nutrition-based interventions were the primary intervention recommended by IM providers, primary care physicians and gastroenterologists may wish to consider referring FBD patients to registered dietitian-nutritionists (RDNs) skilled in implementing elimination diets.

Physicochemical and Sensory Stability Evaluation of Gummy Candies Fortified with Mountain Germander Extract and Prebiotics.

Health-conscious consumers seek convenient ways of incorporating different functional ingredients into their diets. Gummy candies are among the most popular confectionery products but generally regarded as nutritionally empty. A gelatin-sugar matrix, providing a highly appreciated sensory experience of sweetness and chewiness, could be used to deliver various bioactive compounds, especially those carrying an unpleasant taste. This work aimed to formulate gelatin gummies based on the mountain germander extract (MGe) as a source of phenylethanoid glycosides (PhEG). Sucrose and glucose syrup contents were partially or completely substituted with combinations of xylitol, maltitol and prebiotic poly- and oligosaccharides. Chemical, textural and sensory parameters were evaluated after production and 2 months of storage. Formulations containing fructooligosaccharides and xylooligosaccharides maintained a characteristic appearance during storage at all three levels of sugar (high, low and none), whereas inulin-added and plain (i.e., without prebiotic) candies suffered from mold contamination or appearance/textural changes. The color of the candies noticeably changed and appeared darker. The PhEG were shown to be stable during the candies' production (approximately 90%) and generally maintained their contents during storage. Texture parameters, except hardness, exhibited high positive correlations and resembled the commercial product. Sensory-wise, a moderate bitterness intensity with a decreasing tendency, along with the high transparency and preservation of the characteristic shape facilitated high general acceptance. Gummy candies with prebiotics were shown to be a highly suitable matrix for the bitter MGe, delivering up to 40 mg of PhEG and 4.5 g of prebiotics in one serving size. This study provides a reference for implementing herbal extracts and emerging prebiotics (XOS) in functional confectionery.

Nonallergic Diseases Associated With Foods.

Clinicians are faced with evaluating real and alleged reactions to foods that may be allergic or nonallergic. Pathogenesis, diagnosis, and treatment of various non-IgE-mediated diseases are discussed in this review. These food-related conditions range from mild to severe. Referral for an allergy workup may be pursued despite the lack of IgE-mediated symptoms. Diagnostic testing is available for defined non-IgE-mediated food diseases that are either immunologic or nonimmunologic. These include celiac disease and related disorders, carbohydrate maldigestion, pancreatic insufficiency, and histamine intolerance. In contrast, there is a paucity of definitive studies to prove food intolerance diseases. There are no definitive diagnostic criteria or testing for nonceliac gluten sensitivity. Functional gastrointestinal disorders, such as irritable bowel syndrome, are better stratified diagnostically but still lack reliable testing. Both nonceliac gluten sensitivity and irritable bowel syndrome are linked to dietary triggers including fermentable oligosaccharides, disaccharides, monosaccharides, and polyols. Therefore, dietary alteration alone may be diagnostic and therapeutic when all other conditions are ruled out. These conditions are important considerations when evaluating a patient with history of a food reaction. There is little evidence that foods are causative in other ailments such as acne, migraines, and nasal congestion and hypersecretion.

Synthesis of chiral functional polyhydroxylated arenes via Mukaiyama aldol reaction from Perlin aldehydes.

Functionalized aryl polyhydroxylated compounds could be of great synthetic value for natural product synthesis. However, the synthesis of such compounds usually requires multi-step synthesis or the usage of sensitive reagents. We present here a practically simple route for the synthesis of such functionalized arylpolyols from glycal derived α,ß-unsaturated 2,3-dideoxy aldehyde as well as α,ß-saturated 2,3-dideoxy aldehyde (Perlin aldehydes) via Mukaiyama cross aldol condensation in the presence of silyl enol ether and TiCl4. It was observed that the nature of the electronic substitution of the silyl enol ether does not play any role in the yield of the desired products. Further functionalization of the products has also been shown.

Polyurethane Adhesives for Wood Based on a Simple Mixture of Castor Oil and Crude Glycerin.

Developing a new type of polyurethane is essential because conventional options often exhibit shortcomings in terms of environmental sustainability, cost-effectiveness, and performance in specialized applications. A novel polyurethane adhesive derived from a simple mixture of castor oil (CO) and crude glycerin (CG) holds promise as it reduces reliance on fossil fuels and harnesses renewable resources, making it environmentally friendly. Simple CO/CG mixtures, adjusted at three different weight fractions, were used as bio-based polyester polyols to produce polyurethane adhesive for wood bonding. The resulting products are yellowish liquids with moderate-to-high viscosity, measuring 19,800-21,000 cP at 25 °C. The chemical structure of the polyester polyols was characterized using infrared spectroscopy (FTIR), thermogravimetry (TG), and differential scanning calorimetry (DSC). These polyols reacted with polymeric 4,4-methylene diphenyl diisocyanate (p-MDI) at a consistent isocyanate index of 1.3, resulting in the formation of polyurethane adhesives. Crucially, all final adhesives met the adhesive strength requirements specified by ASTM D-5751 standards, underscoring their suitability for wood bonding applications. The addition of CG enhanced the surface and volumetric hydrophobicity of the cured adhesives, resulting in adhesive properties that are not only stronger but also more weather-resistant. Although the thermal stability of the adhesives decreased with the inclusion of CG, FTIR analysis confirmed proper polyurethane polymer formation. The adhesive adjusted for a 2:1 CO:CG weight ratio promoted wood-wood bonding with the highest shear strength, likely due to a higher formation of urethane linkages between hydroxyl groups from the blend of polyols and isocyanate groups from the p-MDI.