Silver oxide doped iron oxide/alginate nanocomposite coated cotton cloth for selective catalytic reduction of potassium ferricyanide.

Silver oxide doped iron oxide (Ag2O-Fe2O3) nanocatalyst was prepared and coated on cotton cloth (CC) as well as wrapped in sodium alginate (Alg) hydrogel. Ag2O-Fe2O3 coated CC (Ag2O-Fe2O3/CC) and Ag2O-Fe2O3 wrapped Alg (Ag2O-Fe2O3/Alg) were utilized as catalysts in reduction reaction of 4-nitrophenol (4-NP), congo red (CR), methylene blue (MB) and potassium ferricyanide (K3[Fe(CN)6]). Ag2O-Fe2O3/CC and Ag2O-Fe2O3/Alg were found to be effective and selective catalyst for the reaction of K3[Fe(CN)6]. Further amount of catalyst, K3[Fe(CN)6] quantity, amount of NaBH4, stability of catalyst and recyclability were optimized for the reaction of K3[Fe(CN)6] reduction. Ag2O-Fe2O3/Alg and Ag2O-Fe2O3/CC were appeared to be the stable catalysts by maintaining high activity during recyclability tests showing highest reaction rate constants (kapp) of 0.3472 and 0.5629 min-1, correspondingly. However, Ag2O-Fe2O3/CC can be easily recovered as compared to Ag2O-Fe2O3/Alg by simply removing from the reaction which is the main advantage of Ag2O-Fe2O3/CC. Moreover, Ag2O-Fe2O3/Alg and Ag2O-Fe2O3/CC were also examined in real samples and found useful for K3[Fe(CN)6] reduction involving real samples. The Ag2O-Fe2O3/CC nanocatalyst is a cost and time saving material for economical reduction of K3[Fe(CN)6] and environmental safety.

Spectrophotometric Determination of Cysteine Hydrochloride Content by Ferric Chloride-Potassium Ferricyanide.

In the acidic medium, hydrosulfuryl(-SH) in cysteine hydrochloride can reduce Fe3+ to Fe2+, then Fe2+ react with potassium ferricyanide to form KFe[Fe(CN)6](soluble Prussian blue). Prussian blue has a maximum absorption at 727 nm, Bill's law is observed between mass concentration of cysteine hydrochloride and absorbance of Prussian blue, the content of cysteine hydrochloride is indirectly determinated by measuring the absorbance of Prussian blue. An accurate, simple, fast spectrophotometric method for the determination of cysteine hydrochloride content by ferric chloride-potassium ferricyanide has been established. The optimal determination conditions of cysteine hydrochloride content are explored. The cysteine hydrochloride content is determinate by this method.

Anticancer therapeutic potential of 5-fluorouracil and nisin co-loaded chitosan coated silver nanoparticles against murine skin cancer.

Cancer is a major health concern worldwide as conventional treatment modalities face several limitations such as drug resistance, toxicity etc. To overcome such deficits, combination therapy involving anticancer peptides and chemodrugs is being considered as an attractive strategy. Therefore, present study developed, characterized and evaluated the anticancer potential of a single nanoconstruct comprising of oligomeric chitosan coated silver nanoparticles co-loaded with nisin and 5-florouracil (5-FU/nisin-CHI-AgNPs) against DMBA/TPA-induced murine skin cancer. It was fabricated using wet reduction method of silver salt to form silver nanoparticles followed sequentially by oligomeric chitosan coating, nisin conjugation to deacetylated units of chitosan oligomers (EDC/NHS chemistry) and physical loading of 5-FU. Biophysical characterisation studies revealed that the developed nanoconstruct had UV-visible absorption maxima at 420 nm, zeta potential of + 32.90 mV and 72.39 nm particle size (TEM analysis). In vivo anticancer therapeutic potential was assessed in terms of tumor statistics, histopathological, scanning electron microscopic analyses and testing oxidant/antioxidant status which exhibited marked reduction both in mean tumor volume (68.34 %) and mean tumor burden (82.39 %); restored skin histoarchitecture and improved oxidant/antioxidant status. Interestingly, anticancer therapeutic potential of nisin and 5-florouracil was found to be enhanced in vivo when bound on single composite nanoconstruct. The study forms a basis for developing synergetic single platforms against variety of cancers.

Copper Oxide-Antimony Oxide Entrapped Alginate Hydrogel as Efficient Catalyst for Selective Reduction of 2-Nitrophenol.

Copper oxide-antimony oxide (Cu2O-Sb2O3) was prepared and entrapped inside Na-alginate hydrogel (Alg@Cu2O-Sb2O3). The developed Alg@Cu2O-Sb2O3 was used as catalytic reactor for the reduction of 4-nitrophenol (4-NP), 2-nitrophenol (2-NP), 2,6-dinitrophenol (2,6-DNP), methyl orange (MO), congo red (CR), acridine orange (AO), methylene blue (MB) and potassium ferricyanide (K3[Fe(CN)6]). Alg@Cu2O-Sb2O3 was found to be selective and more efficient for the reduction of 2-NP among all the pollutants. Therefore, 2-NP was selected for a detailed study to optimize various parameters, e.g., the catalyst amount, reducing agent concentration, 2-NP concentration and recyclability. Alg@Cu2O-Sb2O3 was found to be very stable and easily recyclable for the reduction of 2-NP. The Alg@Cu2O-Sb2O3 nanocatalyst reduced 2-NP in 1.0 min, having a rate constant of 3.8187 min-1.

Low consumption and portable technology for dithionite detection based on potassium ferricyanide differential spectrophotometry method in related advanced oxidation processes.

Carbon neutrality has been received more attention and emerged in wastewater treatment processes. Due to the development of treating technologies with the rising of new-emerging pollutants, the coupled chemical processes also should remain current for the goal of carbon-neutral operation. Among of those updated strategies, several advanced oxidation processes (AOPs) based on dithionite (DTN, S2O42-), a common water treatment agent, have been established for refractory organic contaminations removal. However, in terms of DTN detection, the traditional formol-titration method has several application limits including the low detection sensitivity and high consumption of formaldehyde. In this study, compared with traditional method, a low energy consumption technology has been developed based on the potassium ferricyanide with the carbon consumption decreasing by about 5 times. Moreover, detection limit of DTN (mmol/L level) also was lower than the titration method. The method was established based on the fact that every 1 mol of DTN can react with 2 mol [Fe(CN)6]3- under alkaline condition. According to that potassium ferricyanide (K3 [Fe(CN)6]) has the maximum absorption at 419 nm wavelength, a fitting equation based on the linear relationship between the absorbance variation of K3 [Fe(CN)6] and DTN amount in the ranges of 0-30 µmol with the detection limit of 0.6 µmol was established with the determination coefficient of 0.99935. It was found that there was no obvious influence of the ubiquitous foreign species with the amount lower than 6 mM, 4 mM, 6 mM, 4 mM and 1 mg/L for Cl-, HCO3-, NO3-, SO42- and NOM, respectively. Moreover, methanol and tert-butanol were employed to verify the influence of the presence of organic matters on the determination of DTN and no impact was observed in this study. The proposed method provides a new way for DTN detection with stable and countable performance in the related AOPs with the low electric energy and carbon source consumption and high detection efficiency.

Development and properties of bacterial cellulose, curcumin, and chitosan composite biodegradable films for active packaging materials.

To deal with serious environmental damage resulting from plastic packaging materials, biodegradable films using natural products have gained considerable attention. Here, we provide a simple, fast, and environmentally-friendly route to construct a biodegradable film using chitosan (CS), bacterial cellulose (BC), and curcumin (Cur). Composite films (CSn-BC-Cur) using CS with different molecular weights were investigated, and their water moisture content (MC), water solubility (WS), contact angle (CA), mechanical properties, barrier properties, and antioxidant properties were compared. The obtained films were characterized by SEM, XRD, and TGA. The results showed that chitosan with a higher molecular weight presented higher contact angles and mechanical properties, along with a lower moisture content, water vapor transmission rate, and oxygen transmission rate. Furthermore, when the composite film was placed in 95 % ethanol, it released active substances. The results suggest that these composite films can be used as promising materials for food packaging.

An insect acetylcholinesterase biosensor utilizing WO3/g-C3N4 nanocomposite modified pencil graphite electrode for phosmet detection in stored grains.

This study was undertaken to assess the potential of Tribolium castaneum (Red flour beetle) acetylcholinesterase (Tc-AChE) based electrochemical biosensor integrating WO3/g-C3N4 nanocomposite modified Pencil graphite electrode to detect an organophosphate insecticide, Phosmet. The WO3/g-C3N4 nanocomposite provides a non-toxic, biocompatible surface for binding the enzyme on the electrode surface, attributed to its large surface area, high conductivity, and low ohmic resistance. The proposed biosensor shows a very good analytical performance with LOD 3.6 nM for Phosmet and effectively determined Phosmet in wheat with a 99% recovery rate. Furthermore, molecular docking deciphers the binding interactions of Phosmet with Tc-AChE using a modified AutoDock LGA algorithm and an AMBER03 force field in YASARA. The kinetic parameters strongly suggest the high potency of inhibitor with the enzyme. This study presents an adaptable, rapid, and straightforward approach that opens ways towards real progress in developing commercial biosensors for pesticide detection.

Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3.

An electrochemical sensor has been developed based on ion imprinted polymer (IIP) and nanoporous gold (NPG) modified gold electrode (IIP/NPG/GE) for determination of arsenic ion (As3+) in different kinds of water. NPG with high conductivity, large specific surface area, and high biocompatibility was prepared by a green electrodeposition method. Then a layer of IIP was synthesized in situ on NPG surface by electropolymerization, in which As3+ was used as template ion and o-phenylenediamine as functional monomer. We used potassium ferricyanide and potassium ferrocyanide chelates as electrochemical probes to generate signals. The electrochemical behavior of IIP/NPG/GE (vs. Ag/AgCl) was studied by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The linear range for As3+ was 2.0 × 10-11 to 9.0 × 10-9 M, and the lower detection limit was 7.1 × 10-12 M (S/N = 3). This newly developed sensor has good stability and selectivity, and has been successfully applied to the As3+ determination of four kinds of water quality.

Electrochemical DNA biosensor for potential carcinogen detection in food sample.

The presence of carcinogens in food is a major food safety concern. A nanocomposite-based electrochemical DNA biosensor was constructed for potential carcinogen detection in food samples by immobilizing amine terminated single stranded DNA onto silica nanospheres deposited onto a screen-printed electrode modified using gold nanoparticles. The effect of three different DNA sequences: 15-base guanine, 24-base guanine and 24-base adenine-thymine rich DNA on carcinogen (formaldehyde and acrylamide) detection was evaluated. The competitive binding of the DNA with the carcinogen and electroactive indicator, Methylene blue (MB) was measured using differential pulse voltammetry. Optimization studies were conducted for MB concentration and accumulation time, DNA concentration, buffer concentration, pH and ionic strength. Overall, the 24-base guanine rich DNA yielded the best results with a detection limit of 0.0001 ppm, linear range between 0.0001 ppm and 0.1 ppm and reproducibility below 5% R.S.D. Finally, the results obtained using the biosensor were validated using Ames test.

Effect of lactobacillus strains on phenolic profile, color attributes and antioxidant activities of lactic-acid-fermented mulberry juice.

This study was conducted to investigate the effect of lactic acid bacteria (LAB) strains on color properties, phenolic profile and antioxidant activities of mulberry juice. Mulberry juice was separately fermented at 37 °C for 36 h using Lactobacillus plantarum, Lactobacillus acidophilus and Lactobacillus paracasei. The results showed that lactic acid fermentation impacted on the color of the juice. Moreover, the study demonstrated that LABs impacted on the phenolic profile of the juice. Syringic acid, cyanidin-3-O-rutinoside and quercetin were the predominant phenolic acid, anthocyanin and flavonol respectively in the lactic-acid-fermented mulberry juice. The degree of radical scavenging activity was species-specific with the L. plantarum fermented juice having the highest radical scavenging activities. The correlation analysis demonstrated that flavonols and anthocyanins were mostly responsible for the increased in 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) scavenging activity while phenolic acids and flavonols were responsible for 2,2-diphenyl-1-picrylhydrazyl scavenging activity and reducing power capacity of the fermented juice.

Anti-scorpion venom activity of Thapsia garganica methanolic extract: Histopathological and biochemical evidences.

ETHNOPHARMACOLOGICAL RELEVANCE: Thapsia garganica, is a herbal medicine traditionally used as diuretic, emetic and purgative. It is also used as anti-scorpion venom in Morocco; however, its protective effects against scorpion venom remain elusive. AIM OF THE STUDY: The present study was undertaken to evaluate anti-venom activity of T. garganica in vivo through histological and biochemical studies. MATERIALS AND METHODS: Methanolic leaves extract of T. garganica was evaluated for anti-venom activity against buthus. occitanus under in vivo conditions. Histopathological and biochemical changes in envenomed and treated mice were also examined. Phytochemical screening was conducted to estimate the major constituents whereas DPPH, ß -Carotene-linoleic acid and reducing power assays were performed to evaluate the anti-oxidant activity of T. garganica extract. RESULTS: Methanolic leaves extract of T. garganica (2g/kg) increased the survival time (> 18h) of mice injected with lethal doses of B. occitanus venom, with remarkable recovery of histology damage. Furthermore T. garganica induced a significant decreased of biochemical markers of kidney, liver and heart function. Phytochemistry screening revealed the presence of phenolic compounds, flavonoids, tannins and steroids/terpenoids, which might explain the bioactivity of the extract. It was also shown that the extract has an exceptionally high antioxidant activity compared to well-known antioxidants used as standards. CONCLUSION: The present study provides strong evidence that support the use of T. garganica as anti-scorpion venom in traditional medicine in Morocco. However, additional studies are required to isolate and identify the metabolites responsible for the activity.

Mediator Preference of Two Different FAD-Dependent Glucose Dehydrogenases Employed in Disposable Enzyme Glucose Sensors.

Most commercially available electrochemical enzyme sensor strips for the measurement of blood glucose use an artificial electron mediator to transfer electrons from the active side of the enzyme to the electrode. One mediator recently gaining attention for commercial sensor strips is hexaammineruthenium(III) chloride. In this study, we investigate and compare the preference of enzyme electrodes with two different FAD-dependent glucose dehydrogenases (FADGDHs) for the mediators hexaammineruthenium(III) chloride, potassium ferricyanide (the most common mediator in commercial sensor strips), and methoxy phenazine methosulfate (mPMS). One FADGDH is a monomeric fungal enzyme, and the other a hetero-trimeric bacterial enzyme. With the latter, which contains a heme-subunit facilitating the electron transfer, similar response currents are obtained with hexaammineruthenium(III), ferricyanide, and mPMS (6.8 µA, 7.5 µA, and 6.4 µA, respectively, for 10 mM glucose). With the fungal FADGDH, similar response currents are obtained with the negatively charged ferricyanide and the uncharged mPMS (5.9 µA and 6.7 µA, respectively, for 10 mM glucose), however, no response current is obtained with hexaammineruthenium(III), which has a strong positive charge. These results show that access of even very small mediators with strong charges to a buried active center can be almost completely blocked by the protein.

Molecular mechanisms and in vitro antioxidant effects of Lactobacillus plantarum MA2.

Lactobacillus plantarum MA2 was isolated from Chinese traditional Tibetan kefir grains. The antioxidant activities in vitro of this strain were evaluated extensively. The results showed that L. plantarum MA2 can tolerate hydrogen peroxide up to 2.0mM, and its fermentate (fermented supernatant, intact cell and cell-free extract) had strong reducing capacities, lipid peroxidation inhibition capacities, Fe2+-chelating abilities, as well as various free radical scavenging capacities. Additionally, both the fermented supernatant and cell homogenate exhibited glutathione peroxidase activity and superoxide dismutase activity. In order to investigate the antioxidant mechanism of L. plantarum MA2 at the molecular level, eight antioxidant-related genes were identified, and further analyzed. Three groups of genes cat, gshR and npx, were found up-regulated under H2O2 challenge.

Optimization of alginate alkaline extraction technology from Sargassum latifolium and its potential antioxidant and emulsifying properties.

Alginate was recovered from Sargassum latifolium biomass using different conditions of alkali treatment. Box-Behnken experimental design was evaluated to study the influence of alkali:alga ratio, temperature and time on alginate yield, and its molecular weight (MW) and mannuronic/guluronic acid ratio (M/G). The second-order polynomial equations were analyzed by appropriate statistical methods. Extraction temperature and time were the most important factors during alginate alkaline extraction. MW and M/G ratio played an important role in controlling the reducing power of alginate. Increasing pH of the alginate solutions enhanced its reducing capacity, while thermal treatment showed a negative effect. Additionally, alginate exhibited good emulsion stabilizing capacities with diverse hydrophobic compounds. Emulsifying activity was less sensitive to temperature, ionic strength and more stable at acidic pH.

Amplified electrochemical determination of maltol in food based on graphene oxide-wrapped tin oxide@carbon nanospheres.

The study presents a new approach for rapid and ultrasensitive detection of maltol using a glassy carbon electrode (GCE) modified with graphene oxide-wrapped tin oxide@carbon nanospheres (SnO2@C@GO). The morphological and components properties of SnO2@C@GO nanocomposites were investigated by means of X-ray diffraction spectroscopy, Raman spectroscopy, field emission scanning electron microscopy, high resolution transmission electron microscopy, and electrochemical impedance spectroscopy. SnO2@C@GO nanocomposite on a GCE had a synergetic effect on the electrochemical oxidation of maltol by means of square wave voltammetry. Under the optimum conditions, anodic peak current response of maltol was linear with its concentration in the range of 80nM-10µM, and a detection limit of 12nM was achieved for maltol. The experiment results presented that the method showed good selectivity, sensitivity, reproducibility, and long-term stability, as well as excellent potential for use as an ideal inexpensive voltammetric method applicable for complex food matrices.

A high effective NADH-ferricyanide dehydrogenase coupled with laccase for NAD(+) regeneration.

OBJECTIVES: To find an efficient and cheap system for NAD(+) regeneration RESULTS: A NADH-ferricyanide dehydrogenase was obtained from an isolate of Escherichia coli. Optimal activity of the NADH dehydrogenase was at 45 °C and pH 7.5, with a K m value for NADH of 10 µM. By combining the NADH dehydrogenase, potassium ferricyanide and laccase, a bi-enzyme system for NAD(+) regeneration was established. The system is attractive in that the O2 consumed by laccase is from air and the sole byproduct of the reaction is water. During the reaction process, 10 mM NAD(+) was transformed from NADH in less than 2 h under the condition of 0.5 U NADH dehydrogenase, 0.5 U laccase, 0.1 mM potassium ferricyanide at pH 5.6, 30 °C CONCLUSION: The bi-enzyme system employed the NADH-ferricyanide dehydrogenase and laccase as catalysts, and potassium ferricyanide as redox mediator, is a promising alternative for NAD(+) regeneration.

Bubble electrodeposition of gold porous nanocorals for the enzymatic and non-enzymatic detection of glucose.

Au nanocorals are grown on gold screen-printed electrodes (SPEs) by using a novel and simple one-step electrodeposition process. Scanning electron microscopy was used for the morphological characterization. The devices were assembled on a three-electrode SPE system, which is flexible and mass producible. The electroactive surface area, determined by cyclic voltammetry in sulphuric acid, was found to be 0.07±0.01cm(2) and 35.3±2.7cm(2) for bare Au and nanocoral Au, respectively. The nanocoral modified SPEs were used to develop an enzymatic glucose biosensor based on H2O2 detection. Au nanocoral electrodes showed a higher sensitivity of 48.3±0.9µA/(mMcm(2)) at +0.45V vs Ag|AgCl compared to a value of 24.6±1.3µA/(mMcm(2)) at +0.70V vs Ag|AgCl obtained with bare Au electrodes. However, the modified electrodes have indeed proven to be extremely powerful for the direct detection of glucose with a non-enzymatic approach. The results confirmed a clear peak observed by using nanocoral Au electrode even in the presence of chloride ions at physiological concentration. Amperometric study carried out at +0.15V vs Ag|AgCl in the presence of 0.12M NaCl showed a linear range for glucose between 0.1 and 13mM.

Preparation of yolk-shell structured copper oxide@silica oxide spheres and their application in high performance electrochemical sensing of Formoterol fumarate residues in swine feed and tissues.

In this paper, we report a facile route to synthesize yolk-shell structured copper oxide@silica oxide (CuO@SiO2) spheres and their application to construct an electrochemical Formoterol fumarate (FF) sensor. The CuO@SiO2 was characterized by means of Fourier transform infrared spectroscopy, X-ray powder diffraction, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Further, FF was electrocatalytically oxidized at the CuO@SiO2 film modified glassy carbon electrode (GCE), which led to a sensitive determination of FF. The oxidation current of FF was linear with concentration in the range of 0.030-10 µM and the detection limit was found to be 5.0 nM (S/N = 3). The observed analytical parameters such as wide linear range, low detection limit and short response time were superior to previously reported FF sensors. Finally, it was demonstrated that the proposed sensor could be used for the selective determination of FF present in swine feed and tissues.

A high throughput gold nanoparticles chemiluminescence detection of opioid receptor antagonist naloxone hydrochloride.

BACKGROUND: The opioid antagonist agent naloxone hydrochloride (NLX) is a drug that has high affinity for opiate receptors but do not activate these receptors. Owing to the role of this drug to block the effects of exogenous administered opioids and endogenous released endorphians we can deduce the importance of developing sensitive analytical methods for detection of such drug. In the present study gold nanoparticles (AuNPs) was employed for enhancing the chemiluminescence (CL) signals arising from luminol-ferricyanide reaction in the presence of naloxone hydrochloride using sequential injection chemiluminescence analysis (SIA). METHOD: In the present study gold nanoparticles (AuNPs) was employed for enhancing the chemiluminescence (CL) signals arising from luminol-ferricyanide reaction in the presence of naloxone hydrochloride using sequential injection chemiluminescence analysis (SIA). RESULTS: The developed method was examined under optimum experimental conditions and the obtained results revealed a linear relationship between the relative CL intensity and the investigated drug at a concentration range of 1.0×10(-9)-1.0×10(-2) mol L(-1), (r = 0.9993, n=9) with detection and quantification limits of 1.6×10(-11) and 1.0×10(-9) mol L(-1), respectively. The relative standard deviation was 0.9%. CONCLUSION: The proposed method was employed for the determination of the investigated drug in bulk powder, its pharmaceutical dosage forms and biological fluids. The interference of some metals and amino acids on the CL intensity was investigated. Also the interference of some related pharmacological action drugs was tested. The obtained results of the developed method were statistically treated and compared with those obtained from other reported methods. Graphical AbstractUtility of gold nanparticles in luminol-potassium ferricyanide chemiluminescence system for determination of naloxone hydrochloride.

One-step synthesis of potassium ferricyanide-doped polyaniline nanoparticles for label-free immunosensor.

A novel, label-free and inherent electroactive redox immunosensor for ultrasensitive detection of carcinoembryonic antigen (CEA) was proposed based on gold nanoparticles (AuNPs) and potassium ferricyanide-doped polyaniline (FC-PANI) nanoparticles. FC-PANI composite was synthesized via oxidative polymerization of aniline, using potassium ferricyanide (K3[Fe(CN)6]) as both oxidant and dopant. FC-PANI acting as the signal indicator was first fixed on a gold electrode (GE) to be the signal layer. Subsequently, the negatively charged AuNPs could be adsorbed on the positively charged FC-PANI modified GE surface by electrostatic adsorption, and then to immobilize CEA antibody (anti-CEA) for the assay of CEA. The CEA concentration was measured through the decrease of amperometric signals in the corresponding specific binding of antigen and antibody. The wide linear range of the immunosensor was from 1.0 pg mL(-1) to 500.0 ng mL(-1) with a low detection limit of 0.1 pg mL(-1) (S/N=3). The proposed method would have a potential application in clinical immunoassays with the properties of facile procedure, stability, high sensitivity and selectivity.