RESUMO
Bubble growth processes are highly complex processes, which are not only dependent on the foaming process parameters (temperature, pressure and blowing agent concentration) but also on the type and structure of the polymer used. Since the elongational viscosity at the bubble wall during bubble growth also depends on these influencing factors, the so-called transient elongational viscosity plays a key role in describing the gas bubble growth behavior in polymer melts. The model-based description of the transient elongational viscosity function is difficult due to its dependence on time, Hencky strain and strain rate. Therefore, representative viscosities or shear viscosity models are usually used in the literature to predict the bubble growth behavior. In this work, the transient equibiaxial elongational viscosity function at the bubble wall during bubble growth is described holistically for the first time. This is achieved by extending the so-called molecular stress function (MSF) model by superposition principles (temperature, pressure and blowing agent concentration) and by using the elongational deformation behavior (Hencky strain and strain rate) at the bubble wall during the initial, and thus viscosity-driven, bubble growth process. Therefore, transient uniaxial elongational viscosity measurements are performed and the non-linear MSF model parameters of the two investigated polymers PS (linear polymer chains) and PLA (long-chain branched polymer chains) are determined. By applying the superposition principles and by changing the strain mode parameter to the equibiaxial case in the MSF model, the transient equibiaxial viscosity master curve is obtained and used to describe the bubble growth process. The results show that the extended MSF model can fully predict the transient equibiaxial elongational viscosity function at the bubble wall during bubble growth processes. The bubble growth behavior over time can then be realistically described using the defined transient equibiaxial elongational viscosity function at the bubble wall. This is not possible, for example, with a representative viscosity and therefore clearly demonstrates the influence and importance of knowing the transient deformation behavior that prevails at the bubble wall during bubble growth processes.
RESUMO
In recent years, global attention towards new energy has surged due to increasing energy demand and environmental concerns. Researchers have intensified their focus on new energy, leading to advancements in technologies like triboelectrification, which harnesses energy from the environment. The invention of the triboelectric nanogenerator (TENG) has led to new possibilities, with the rotary sliding TENG standing out for its superior performance. However, understanding its mechanical behavior remains a challenge, potentially leading to structural issues. This paper introduces a novel analytical mechanics model to analyze the mechanical performance of the stator of the rotary sliding TENG, offering a new analytical solution. The solution also presents an innovative approach to solving axisymmetric problems in elasticity theory since it challenges a traditional assumption that the stress function depends solely on the radial coordinate, proposing a new stress function to derive a more general solution, supplementing the classical approach in the theory of elasticity. Through the obtained solutions, the mechanical characteristics of the rotary sliding TENG during operation are analyzed. A clearer relationship between mechanical characteristics and electrical output is expected to provide a theoretical basis for the design of the rotary sliding TENG.