RESUMO
Anionic redox chemistry has attracted increasing attention for the improvement in the reversible capacity and energy density of cathode materials in Li/Na-ion batteries. However, adverse electrochemical behaviors, such as voltage hysteresis and sluggish kinetics resulting from weak metal-ligand interactions, commonly occur with anionic redox reactions. Currently, the mechanistic investigation driving these issues still remains foggy. Here, we chemically designed Na0.8Fe0.4Ti0.6S2 and Na0.8Fe0.4Ti0.6O2 as model cathodes to explore the covalency effects on metal-ligand interactions during anionic redox process. Na0.8Fe0.4Ti0.6S2 with strengthened covalent interaction of metal-ligand bonds exhibits smaller voltage hysteresis and faster kinetics than Na0.8Fe0.4Ti0.6O2 during (de)sodiation process. Theoretical calculations suggest that Fe is the dominant redox-active center in Na0.8Fe0.4Ti0.6S2, whereas the redox-active center moves from Fe to O with the removal of Na+ in Na0.8Fe0.4Ti0.6O2. We attribute the above different redox behaviors between Na0.8Fe0.4Ti0.6S2 and Na0.8Fe0.4Ti0.6O2 to the charge transfer kinetics from ligand to metal. Moreover, the structural stability of Na0.8Fe0.4Ti0.6S2 is enhanced by increasing the cation migration barriers through strong metal-ligand bonds during desodiation. These insights into the originality of metal-ligand interactions provide guidance for the design of high-capacity and structurally stable cathode materials for Li/Na-ion batteries.
RESUMO
Ligand-to-metal charge transfer (LMCT) is conceived as a universal theory to account for voltage hysteresis in oxygen-redox battery electrodes. However, the influence of oxygen anionic species on mediating LMCT and its reflection to voltage hysteresis remain poorly understood. Herein, we demonstrate a close interplay between the chemical states of oxidized oxygen species, the cationic species, and the kinetics of LMCT and forcefully identify their influence on the magnitude of voltage hysteresis. Combining electrochemical/spectroscopic evidence and first-principles calculations, we clarify two distinct kinds of dynamic LMCT processesâthat is, the formation of trapped molecular O2 accompanied by the reduction of Ni4+/Ni3+ to Ni2+ (fast LMCT) during relaxation in Li-rich cation-disordered rock-salt (DRX) Li1.3Ni0.27Ta0.43O2 with extremely large voltage hysteresis, the formation of O-O dimers, and the partial reduction of Mn4+ to Mn3+ (slow LMCT) in DRX-Li1.3Mn0.4Ta0.3O2 with medium hysteresis. We further validate the maintenance of both cationic (Mn4+) and anionic (O-â¢) species during relaxation in Na2Mn3O7, reconciling its nonhysteretic behavior to the absence of LMCT. This study highlights the critical role of intermediate anionic species in mediating LMCT and provides a causal explanation of various voltage hysteresis signatures of oxygen-redox materials.
RESUMO
Sodium ion batteries have attracted great attention for large scale energy storage devices to replace lithium-ion batteries. As a promising polyanionic cathode material of sodium-ion batteries, Na3V2(PO4)2F3 (NVPF) belonging to NASICON exhibits large gap space and excellent structural stability, leading to a high energy density and ultralong cycle lifespan. To improve its stability and Na ion mobility, K+ cations are introduced into NVPF crystal as in situ partial substitution for Na+. The influence of K+ in situ substitution on crystal structure, electronic properties, kinetic properties, and electrochemical performance of NVPF are investigated. Through ex situ examination, it turns out that K+ occupied Na1 ion, in which the K+ does not participate in the charge-discharge process and plays a pillar role in improving the mobility of Na+. Moreover, the doping of K+ cation can reduce the bandgap energy and improve the electronic conductivity. Besides, the optimal K+ doping concentration in N0.92K0.08VPF/C is found so as to achieve rapid Na+ migration and reversible phase transition. The specific capacity of N0.92K0.08VPF/C is as high as 128.8 mAh g-1 at 0.2 C, and at 10 C its rate performance is excellent, which shows a capacity of 113.3 mAh g-1.
RESUMO
The Mn-based polyanion compound Na3MnTi(PO4)3 (NMTP) with a Na superionic conductor (NASICON) structure has attracted incremental attention as a potential cathode material for sodium-ion batteries. However, the occupation of Mn2+ on Na+ vacancies usually leads to severe voltage hysteresis, which in turn results in significant capacity loss, slow Na+ diffusion kinetics, and poor cycling stability. Herein, anion-substituted compounds Na3MnTi(PO4)3-x(SiO4)x (x = 0.1, 0.2, and 0.3) are synthesized. It reveals that the SiO44- substitution could induce partial oxidation of Mn2+ to Mn3+, and the latter has a lower occupancy preference on Na+ vacancies. By the proposed charge compensation strategy, the Mn2+ occupation on Na+ vacancies can be significantly suppressed. As a result, the voltage hysteresis is substantially inhibited, and greatly improved electrochemical performance is achieved. This study offers an alternative strategy to address the voltage hysteresis associated with NMTP and other Mn-based NASICON cathode materials.
RESUMO
Metal zinc (Zn) is being explored as a possible anode for aqueous zinc ion batteries (AZIBs). However, unrestrained Zn dendrite caused by "tip effect" and chemical corrosion continue to plague the Zn deposition process, limiting the functionality of AZIBs and prohibiting their use at high current densities. This work presents an in situ approach for introducing homogeneous ZnO nanoarrays onto the surface of Zn foil (Zn@ZnO NAs) as a functional protective interphase. On the one hand, well-distributed ZnO NAs protection layer can regulate the "tip effect" and confine the growth of Zn dendrite. On the other hand, the ZnO NAs layer can enhance the desolvation and diffusion process of Zn2+ on the surface of anode, attributing to low voltage hysteresis and exceptional electrochemical performance at high current densities. As a result, the Zn@ZnO NAs exhibits a low voltage hysteresis of 50.8 mV with a superb lifespan of 1200 h at a current density of 5 mA cm-2. Moreover, Zn@ZnO NAs||α-MnO2 full-cell shows a superior cycling performance after 500 cycles at 0.5 A g-1 with a capacity of 216.69 mAh g-1. This work is expected to provide ideas for designing other reversible zinc anode chemical systems, especially under a high current density.
RESUMO
O3-type layered transition metal cathodes are promising energy storage materials due to their sufficient sodium reservoir. However, sluggish sodium ions kinetics and large voltage hysteresis, which are generally associated with Na+ diffusion properties and electrochemical phase transition reversibility, drastically minimize energy density, reduce energy efficiency, and hinder further commercialization of sodium-ion batteries (SIBs). Here, this work proposes a high-entropy tailoring strategy through manipulating the electronic local environment within transition metal slabs to circumvent these issues. Experimental analysis combined with theoretical calculations verify that high-entropy metal ion mixing contributes to the improved reversibility of redox reaction and O3-P3-O3 phase transition behaviors as well as the enhanced Na+ diffusivity. Consequently, the designed O3-Na0.9Ni0.2Fe0.2Co0.2Mn0.2Ti0.15Cu0.05O2 material with high-entropy characteristic could display a negligible voltage hysteresis (<0.09 V), impressive rate capability (98.6 mAh g-1 at 10 C) and long-term cycling stability (79.4% capacity retention over 2000 cycles at 5 C). This work provides insightful guidance in mitigating the voltage hysteresis and facilitating Na+ diffusion of layered oxide cathode materials to realize high-rate and high-energy SIBs.
RESUMO
Li-rich cathode materials have emerged as one of the most prospective options for Li-ion batteries owing to their remarkable energy density (>900 Wh kg-1). However, voltage hysteresis during charge and discharge process lowers the energy conversion efficiency, which hinders their application in practical devices. Herein, the fundamental reason for voltage hysteresis through investigating the O redox behavior under different (de)lithiation states is unveiled and it is successfully addressed by formulating the local environment of O2-. In Li-rich Mn-based materials, it is confirmed that there exists reaction activity of oxygen ions at low discharge voltage (<3.6 V) in the presence of TM-TM-Li ordered arrangement, generating massive amount of voltage hysteresis and resulting in a decreased energy efficiency (80.95%). Moreover, in the case where Li 2b sites are numerously occupied by TM ions, the local environment of O2- evolves, the reactivity of oxygen ions at low voltage is significantly inhibited, thus giving rise to the large energy conversion efficiency (89.07%). This study reveals the structure-activity relationship between the local environment around O2- and voltage hysteresis, which provides guidance in designing next-generation high-performance cathode materials.
RESUMO
Rechargeable aluminum (Al) batteries have attracted considerable interest as potential large-scale energy storage technologies due to the abundance, high theoretical capacity, and high safety of Al. We report here a highly reversible Al-Mo6Se8 prototype cell with low discharge-charge hysteresis (approximately 50 mV under 30 mA g-1 at 50 °C), ultra-flat discharge plateau, and exceptional cycle stability: the reversible capacity retaining at a steady 77 mA h g-1 after more than 1800 cycles. The Al intercalation-extraction mechanism is probed with ex situ and operando XRD techniques, revealing the reversible intercalation reaction from Mo6Se8 to Al4/3Mo6Se8. The stable electrochemical performance and unambiguous intercalation mechanism of the Al-Mo6Se8 system provide an alternative for beyond-lithium battery technologies.
RESUMO
Hysteresis is a general phenomenon regularly observed in various materials. Usually, hysteretic behavior is an intrinsic property that cannot be circumvented in the nonequilibrium operation of the system. Herein, it is shown that, at least with regard to the hysteretic behavior of phase-separating battery materials, it is possible to enter (deeply) the hysteretic loop at finite battery currents. This newly observed electric response of the electrode, which is inherent to phase-separating materials, is related to its microscopic origin arising from a (significant) share of the active material residing in an intraparticle phase-separated state. This intriguing observation is further generalized by revealing that a phase-separating material can feature (significantly) different chemical potentials at the same bulk lithiation level and temperature when exposed to the same finite current and external voltage hysteresis. Therefore, the intraparticle phase-separated state significantly affects the DC and AC characteristics of the battery. The experimental evidence for entering the intraparticle phase-separated state is supported by thermodynamic reasoning and advanced modeling. The current findings will help advance the understanding, control, diagnostics, and monitoring of batteries composed of phase-separating materials while also providing pertinent motivation for the enhancement of battery design and performance.
RESUMO
Li-rich cathodes are extensively investigated as their energy density is superior to Li stoichiometric cathode materials. In addition to the transition metal redox, this intriguing electrochemical performance originates from the redox reaction of the anionic sublattice. This new redox process, the so-called anionic redox or, more directly, oxygen redox in the case of oxides, almost doubles the energy density of Li-rich cathodes compared to conventional cathodes. Numerous theoretical and experimental investigations have thoroughly established the current understanding of the oxygen redox of Li-rich cathodes. However, different reports are occasionally contradictory, indicating that current knowledge remains incomplete. Moreover, several practical issues still hinder the real-world application of Li-rich cathodes. As these issues are related to phenomena resulting from the electronic to atomic evolution induced by unstable oxygen redox, a fundamental multiscale understanding is essential for solving the problem. In this review, the current mechanistic understanding of oxygen redox, the origin of the practical problems, and how current studies tackle the issues are summarized.
RESUMO
Ubiquinone, composed of a 1,4-benzoquinone and naturally produced in the body, actively participates in the mitochondrial redox reaction and functions as an endogenous lipid antioxidant, protecting against peroxidation in the pituitary-dependent hormonal system. However, the questions of if and how ubiquinone directly affects neuronal ionic currents remain largely unsettled. We investigated its effects on ionic currents in pituitary neurons (GH3 and MMQ cells) with the aid of patch-clamp technology. Ubiquinone decreased the peak amplitude of the voltage-gated Na+ current (INa) with a slowing of the inactivation rate. Neither menadione nor superoxide dismutase modified the ubiquinone-induced INa inhibition. In response to an isosceles-triangular ramp pulse, the persistent INa (INa(P)) at high- and low- threshold potentials occurred concurrently with a figure-eight hysteresis loop. With ubiquinone, the INa(P) increased with no change in the intersection voltage, and the magnitude of the voltage-dependent hysteresis of the current was enhanced. Ubiquinone was ineffective in modifying the gating of hyperpolarization-activated cation currents. In MMQ lactotrophs, ubiquinone effectively decreased the amplitude of the INa and the current inactivation rate. In sum, the effects of ubiquinone demonstrated herein occur upstream of its effects on mitochondrial redox processes, involved in its modulation of sodium channels and neuronal excitability.
Assuntos
Antioxidantes , Sódio , Antioxidantes/farmacologia , Lipídeos/farmacologia , Neurônios , Sódio/farmacologia , Ubiquinona/farmacologiaRESUMO
Oxygen redox (OR) reactions in sodium layered oxide cathodes have been studied intensively to harness their full potential in achieving high energy density for sodium-ion batteries (SIBs). However, OR triggers a large hysteretic voltage during discharge after the first charge process for OR-based oxides, and its intrinsic origin is unclear. Therefore, in this study, an in-depth reinvestigation on the fundamentals of the reaction mechanism in Na[Li1/3Mn2/3]O2 with a Mn/Li ratio (R) of 2 was performed to determine the factors that polarize the OR activity and to provide design rules leading to nonhysteretic oxygen capacity using first-principles calculations. Based on thermodynamic energies, the O2-/O22- and O2-/On- conditions reveal the monophasic (0.0 ≤ x ≤ 4/6) and biphasic (4/6 ≤ x ≤ 1.0) reactions in Na1-x[Li2/6Mn4/6]O2, but each stability at x = 5/6 is observed differently. The O-O bond population elucidates that the formation of an interlayer O-O dimer is a critical factor in triggering hysteretic oxygen capacity, whereas that in a mixed layer provides nonhysteretic oxygen capacity after the first charge. In addition, the migration of Li into the 4h site in the Na metallic layer contributes less to the occurrence of voltage hysteresis because of the suppression of the interlayer O-O dimer. These results are clearly elucidated using the combined-phase mixing enthalpies and chemical potentials during the biphasic reaction. To compare the Mn oxide with R = 2, Na1-x[Li1/6Mn5/6]O2 tuned with R = 5 was investigated using the same procedure, and all the impeding factors in restraining the nonhysteretic OR were not observed. Herein, we suggest two strategies based on three types of OR models: (i) exploiting the migration of Li ions for the suppression of the interlayer O-O dimer and (ii) modulating the Mn/Li ratio for controlling the OR participation, which provides an exciting direction for nonhysteretic oxygen capacities for SIBs and lithium-ion batteries.
RESUMO
Nonhysteretic redox capacity is a critical factor in achieving high energy density without energy loss during cycling for rechargeable battery electrodes, which has been considered a major challenge in oxygen redox (OR) for Li-excess layered oxide cathodes for lithium-ion batteries (LIBs). Until recently, transition metal migration into the Li metal layer and the formation of O-O dimers have been considered major factors affecting hysteretic oxygen capacity. However, Li-excess layered oxides, particularly Ru oxides, exhibit peculiar voltage hysteresis that cannot be sufficiently described by only these factors. Therefore, this study aims to unlock the critical impeding factors in restraining the non-polarizing oxygen capacity of Li-excess layered oxides (herein, Li2RuO3) that exhibit reversible OR reactions. First, Li2RuO3 undergoes an increase in the chemical potential fluctuation as both the thermodynamic material instability and vacancy content increase. Second, the chemical compression of O-O bonds occurs at the early stage of the OR reaction (0.5 ≤ x ≤ 0.75) for Li1-xRu0.5O1.5, leading to flexible voltage hysteresis. Finally, in the range of 0.75 ≤ x ≤ 1.0, for Li1-xRu0.5O1.5, the formation of an O(2p)-O(2p)* antibonding state derived from the structural distortion of the RuO6 octahedron leads to the irreversibility of the OR reaction and enhanced voltage hysteresis. Consequently, our study unlocks the new decisive factor, namely, the structural distortion inducing the O(2p)-O(2p)* antibonding state, of the hysteretic oxygen capacity and provides insights into enabling the full potential of the OR reaction for Li-excess layered oxides for advanced LIBs.
RESUMO
Lacosamide (Vimpat®, LCS) is widely known as a functionalized amino acid with promising anti-convulsant properties; however, adverse events during its use have gradually appeared. Despite its inhibitory effect on voltage-gated Na+ current (INa), the modifications on varying types of ionic currents caused by this drug remain largely unexplored. In pituitary tumor (GH3) cells, we found that the presence of LCS concentration-dependently decreased the amplitude of A-type K+ current (IK(A)) elicited in response to membrane depolarization. The IK(A) amplitude in these cells was sensitive to attenuation by the application of 4-aminopyridine, 4-aminopyridine-3-methanol, or capsaicin but not by that of tetraethylammonium chloride. The effective IC50 value required for its reduction in peak or sustained IK(A) was calculated to be 102 or 42 µM, respectively, while the value of the dissociation constant (KD) estimated from the slow component in IK(A) inactivation at varying LCS concentrations was 52 µM. By use of two-step voltage protocol, the presence of this drug resulted in a rightward shift in the steady-state inactivation curve of IK(A) as well as in a slowing in the recovery time course of the current block; however, no change in the gating charge of the inactivation curve was detected in its presence. Moreover, the LCS addition led to an attenuation in the degree of voltage-dependent hysteresis for IK(A) elicitation by long-duration triangular ramp voltage commands. Likewise, the IK(A) identified in mouse mHippoE-14 neurons was also sensitive to block by LCS, coincident with an elevation in the current inactivation rate. Collectively, apart from its canonical action on INa inhibition, LCS was effective at altering the amplitude, gating, and hysteresis of IK(A) in excitable cells. The modulatory actions on IK(A), caused by LCS, could interfere with the functional activities of electrically excitable cells (e.g., pituitary tumor cells or hippocampal neurons).
Assuntos
Canais de Potássio de Retificação Tardia/antagonistas & inibidores , Ativação do Canal Iônico , Lacosamida/farmacologia , Neoplasias Hipofisárias/tratamento farmacológico , Potássio/metabolismo , Adenoma/tratamento farmacológico , Adenoma/metabolismo , Adenoma/patologia , Animais , Anticonvulsivantes/farmacologia , Transporte de Íons , Neoplasias Hipofisárias/metabolismo , Neoplasias Hipofisárias/patologia , Ratos , Células Tumorais CultivadasRESUMO
A biomaterials based memristor is of great interest for applications in the environment and human friendly electronic systems. Although a pinched current-voltage (I-V) characteristic is a signature of Chua's memristor model, biomemristors generally exhibit nonpinched I-V response. This work reports the discovery of the pinched I-V characteristics of a natural casein-based biomemristor. Water-soluble sodium caseinate (NaCas), synthesized using natural casein that was extracted from edible animal milk, was used for the fabrication of a Al/NaCas/ITO biomemristor device. In addition to pinched I-V characteristics, the Al/NaCas/ITO device shows improved performance with a sufficiently large resistance window (â¼20 times), longer retention time (â¼105 s), and comparable cyclic endurance (>180 cycles), as compared with the reported biomemristors reported in the literature. A physical mechanism is proposed to explain the device characteristics.
Assuntos
Caseínas , Eletrônica , Animais , Materiais Biocompatíveis , Leite , ÁguaRESUMO
An intriguing redox chemistry via oxygen has emerged to achieve high-energy-density cathodes and has been intensively studied for practical use of anion-utilization oxides in A-ion batteries (A: Li or Na). However, in general, the oxygen redox disappears in the subsequent discharge with a large voltage hysteresis after the first charge process for A-excess layered oxides exhibiting anion redox. Unlike these hysteretic oxygen redox cathodes, the two Na-excess oxide models Na2IrO3 and Na2RuO3 unambiguously exhibit nonhysteretic oxygen capacities during the first cycle, with honeycomb-ordered superstructures. In this regard, the reaction mechanism in the two cathode models is elucidated to determine the origin of nonhysteretic oxygen capacities using first-principles calculations. First, the vacancy formation energies show that the thermodynamic instability in Na2IrO3 increases at a lower rate than that in Na2RuO3 upon charging. Second, considering that the strains of Ir-O and Ru-O bonding lengths are softened after the single-cation redox of Ru4+/Ru5+ and Ir4+/Ir5+, the contribution in the oxygen redox from x = 0.5 to 0.75 is larger in Na1-xRu0.5O1.5 than that in Na1-xIr0.5O1.5. Third, the charge variations indicate a dominant cation redox activity via Ir(5d)-O(2p) for x above 0.5 in Na1-xIr0.5O1.5. Its redox participation occurred with the oxygen redox, opposite to the behavior in Na1-xRu0.5O1.5. These three considerations imply that the chemical weakness of Ir(5d)-O(2p) leads to a more redox-active environment of Ir ions and reduces the oxygen redox activity, which triggers the nonhysteretic oxygen capacity during (de)intercalation. This provides a comprehensive guideline for design of reversible oxygen redox capacities in oxide cathodes for advanced A-ion batteries.
RESUMO
In lithium-ion batteries (LIBs), conversion-based electrodes such as transition-metal oxides and sulfides exhibit promising characteristics including high capacity and long cycle life. However, the main challenge for conversion electrodes to be industrialized remains on voltage hysteresis. In this study, Mn3O4 powder was used as an anode material for LIBs to investigate the root cause of the hysteresis. First, the electrochemical reaction paths were found to be dominated by Mn/Mn2+ redox couple after the first lithiation from galvanostatic charging/discharging (GCD) and cyclic voltammetry (CV) measurements. Then, the voltage hysteresis was proposed to be composed of reaction overpotential (â¼0.373 V) and intrinsic overpotential (â¼0.377 V), which were related to the diffusion behaviors according to CV, galvanostatic intermittent titration technique (GITT), and electrochemical impedance spectroscopy (EIS) analyses. Furthermore, results revealed that the formation of disparate phase distribution during lithiation and delithiation could be the root cause of the intrinsic overpotential of Mn3O4. These results were based on ultrahigh-resolution transmission electron microscopy (UHRTEM) and molecular dynamics (MD) simulation. It was expected that improving the diffusion behaviors of the systems could eliminate the voltage hysteresis of Mn3O4. In summary, this paper provides an explicit insight into the hysteresis for conversion-based Mn3O4 that could also be applied to other oxide systems and very crucial to reduce energy loss for commercializing oxides as anode materials in LIBs.
RESUMO
Dexmedetomidine (DEX), a highly selective agonist of α2-adrenergic receptors, has been tailored for sedation without risk of respiratory depression. Our hypothesis is that DEX produces any direct perturbations on ionic currents (e.g., hyperpolarization-activated cation current, Ih). In this study, addition of DEX to pituitary GH3 cells caused a time- and concentration-dependent reduction in the amplitude of Ih with an IC50 value of 1.21 µM and a KD value of 1.97 µM. A hyperpolarizing shift in the activation curve of Ih by 10 mV was observed in the presence of DEX. The voltage-dependent hysteresis of Ih elicited by long-lasting triangular ramp pulse was also dose-dependently reduced during its presence. In continued presence of DEX (1 µM), further addition of OXAL (10 µM) or replacement with high K+ could reverse DEX-mediated inhibition of Ih, while subsequent addition of yohimbine (10 µM) did not attenuate the inhibitory effect on Ih amplitude. The addition of 3 µM DEX mildly suppressed the amplitude of erg-mediated K+ current. Under current-clamp potential recordings, the exposure to DEX could diminish the firing frequency of spontaneous action potentials. In pheochromocytoma PC12 cells, DEX was effective at suppressing Ih together with a slowing in activation time course of the current. Taken together, findings from this study strongly suggest that during cell exposure to DEX used at clinically relevant concentrations, the DEX-mediated block of Ih appears to be direct and would particularly be one of the ionic mechanisms underlying reduced membrane excitability in the in vivo endocrine or neuroendocrine cells.
Assuntos
Agonistas de Receptores Adrenérgicos alfa 2/farmacologia , Dexmedetomidina/farmacologia , Canais Disparados por Nucleotídeos Cíclicos Ativados por Hiperpolarização/metabolismo , Receptores Adrenérgicos alfa 2/metabolismo , Potenciais de Ação/efeitos dos fármacos , Animais , Linhagem Celular Tumoral , Ativação do Canal Iônico/efeitos dos fármacos , Ivabradina/farmacologia , Oxaliplatina/farmacologia , Células PC12 , Canais de Potássio/metabolismo , Ratos , Ioimbina/farmacologiaRESUMO
Ribociclib (RIB, LE011, Kisqali®), an orally administered inhibitor of cyclin-dependent kinase-4/6 (CDK-4/6) complex, is clinically effective for the treatment of several malignancies, including advanced breast cancer. However, information regarding the effects of RIB on membrane ion currents is limited. In this study, the addition of RIB to pituitary tumor (GH3) cells decreased the peak amplitude of erg-mediated K+ current (IK(erg)), which was accompanied by a slowed deactivation rate of the current. The IC50 value for RIB-perturbed inhibition of deactivating IK(erg) in these cells was 2.7 µM. In continued presence of µM RIB, neither the subsequent addition of 17ß-estradiol (30 µM), phorbol 12-myristate 13-acetate (10 µM), or transforming growth factor-ß (1 µM) counteracted the inhibition of deactivating IK(erg). Its presence affected the decrease in the degree of voltage-dependent hysteresis for IK(erg) elicitation by long-duration triangular ramp voltage commands. The presence of RIB differentially inhibited the peak or sustained component of delayed rectifier K+ current (IK(DR)) with an effective IC50 of 28.7 or 11.4 µM, respectively, while it concentration-dependently decreased the amplitude of M-type K+ current with IC50 of 13.3 µM. Upon 10-s long membrane depolarization, RIB elicited a decrease in the IK(DR) amplitude, which was concomitant with an accelerated inactivation time course. However, the inability of RIB (10 µM) to modify the magnitude of the hyperpolarization-activated cation current was disclosed. The mean current-voltage relationship of IK(erg) present in HL-1 atrial cardiomyocytes was inhibited in the presence of RIB (10 µM). Collectively, the hyperpolarization-activated cation current was observed. RIB-mediated perturbations in ionic currents presented herein are upstream of its suppressive action on cytosolic CDK-4/6 activities and partly participates in its modulatory effects on the functional activities of pituitary tumor cells (e.g., GH3 cells) or cardiac myocytes (e.g., HL-1 cells).
Assuntos
Aminopiridinas/farmacologia , Quinase 4 Dependente de Ciclina/antagonistas & inibidores , Quinase 6 Dependente de Ciclina/antagonistas & inibidores , Canais de Potássio de Retificação Tardia/antagonistas & inibidores , Canal de Potássio ERG1/antagonistas & inibidores , Neoplasias Hipofisárias/tratamento farmacológico , Purinas/farmacologia , Potenciais de Ação , Animais , Neoplasias Hipofisárias/metabolismo , Neoplasias Hipofisárias/patologia , Células Tumorais CultivadasRESUMO
This work continues our systematic study of Li- and Mn- rich cathodes for lithium-ion batteries. We chose Li2MnO3 as a model electrode material with the aim of correlating the improved electrochemical characteristics of these cathodes initially activated at 0 °C with the sstructural evolution of Li2MnO3, oxygen loss, formation of per-oxo like species (O22-) and the surface chemistry. It was established that performing a few initial charge/discharge (activation) cycles of Li2MnO3 at 0 °C resulted in increased discharge capacity and higher capacity retention, and decreased and substantially stabilized the voltage hysteresis upon subsequent cycling at 30 °C or at 45 °C. In contrast to the activation of Li2MnO3 at these higher temperatures, Li2MnO3 underwent step-by-step activation at 0 °C, providing a stepwise traversing of the voltage plateau at >4.5 V during initial cycling. Importantly, these findings agree well with our previous studies on the activation at 0 °C of 0.35Li2MnO3·0.65Li[Mn0.45Ni0.35Co0.20]O2 materials. The stability of the interface developed at 0 °C can be ascribed to the reduced interactions of the per-oxo-like species formed and the oxygen released from Li2MnO3 with solvents in ethylene carbonate-methyl-ethyl carbonate/LiPF6 solutions. Our TEM studies revealed that typically, upon initial cycling both at 0 °C and 30 °C, Li2MnO3 underwent partial structural layered-to-spinel (Li2Mn2O4) transition.