Acidic "Water-in-Salt" Electrolyte Enables a High-Energy Symmetric Supercapacitor Based on Titanium Carbide MXene.

Titanium carbide MXene, Ti3C2Tx, exhibits ultrahigh capacitance in acidic electrolytes at negative potentials yet poor stability at positive potentials, resulting in low-energy densities for Ti3C2Tx-based symmetric supercapacitors. Utilizing "water-in-salt" electrolytes has successfully expanded the stable operation potential window of MXenes. However, this advancement comes at the cost of sacrificing their high capacitance in acidic electrolytes. In this work, we report an acidic "water-in-salt" (AWIS) electrolyte composed of sulfuric acid and saturated lithium halide, which effectively doubled the energy density of the Ti3C2Tx-based symmetric supercapacitor compared to those with bare acidic electrolytes. Specifically, the AWIS electrolyte successfully expanded the voltage window of the symmetric device to 1.1 V. A high specific capacitance of 112.34 F g-1 (at 10 mV s-1) was obtained due to the presence of proton redox. As a result, the symmetric device achieved a high-energy density of 19.1 Wh kg-1 and a high capacitance retention of 96.3% after 10,000 cycles. This work demonstrates the importance of designing stable and redox-active electrolytes for high-energy MXene-based symmetric supercapacitors.

"Water-in-Salt" Electrolyte Suppressed MnVOPO4·2H2O Cathode Dissolution for Stable High-Voltage Platform and Cycling Performance for Aqueous Zinc Metal Battery.

Vanadium-based materials have the advantages of abundant valence states and stable structures, having great application potential as cathode materials in metal-ion batteries. However, their low voltage and vanadium dissolution in traditional water-based electrolytes greatly limit their application and development in aqueous zinc metal batteries (AZMBs). Herein, phosphate- and vanadium-based cathode materials (MnVOPO4·2H2O) with stacked layers and few defects were prepared via a condensation reflux method and then combined with a high-concentration electrolyte (21 m LiTFSI + 1 M Zn(CF3SO3)2) to address these limitations. The specific capacity and cycle stability accompanying the stable high voltage of 1.39 V were significantly enhanced compared with those for the traditional electrolyte of 3 M Zn(CF3SO3)2, benefiting from the suppressed vanadium dissolution. The cathode materials of MnVOPO4·2H2O achieved a high specific capacity of 152 mAh g-1 at 0.2 A g-1, with a retention rate of 86% after 100 cycles for AZMBs. A high energy density of 211.78 Wh kg-1 was also achieved. This strategy could illuminate the significance of electrolyte modification and provide potential high-voltage cathode materials for AZMBs and other rechargeable batteries.

Ambient Synthesis of Vanadium-based Prussian Blue Analogues Nanocubes for High-performance and Durable Aqueous Zinc-ion Batteries with Eutectic Electrolytes.

Prussian blue analogues (PBAs) have been widely studied in aqueous zinc-ion batteries (AZIBs) due to the characteristics of large specific surface area, open aperture, and straightforward synthesis. In this work, vanadium-based PBA nanocubes were firstly prepared using a mild in-situ conversion strategy at room temperature without the protection of noble gas. Benefiting from the multiple-redox active sites of V3+/V4+, V4+/V5+ and Fe2+/Fe3+, the cathode exhibited an excellent discharge specific capacity of 200 mA h g-1 in AZIBs, which is much higher than those of other metal-based PBAs nanocubes. To further improve the long-term cycling stability of the V-PBA cathode, a high concentration water-in-salt electrolyte (4.5 M ZnSO4 + 3 M Zn(OTf)2), and a water-based eutectic electrolyte (5.55 M glucose + 3 M Zn(OTf)2) were designed to successfully inhibit the dissolution of vanadium and improve the deposition of Zn2+ onto the zinc anode. More importantly, the assembled AZIBs maintained 55% of their highest discharge specific capacity even after 10000 cycles at 10 A g-1 with superior rate capability. This study provides a new strategy for the preparation of pure PBA nanostructures and a new direction for enhancing the long-term cycling stability of PBA-based AZIBs at high current densities for industrialization prospects.

Sodium Triflate Water-in-Salt Electrolytes in Advanced Battery Applications: A First-Principles-Based Molecular Dynamics Study.

Offering a compelling combination of safety and cost-effectiveness, water-in-salt (WiS) electrolytes have emerged as promising frontiers in energy storage technology. Still, there is a strong demand for research and development efforts to make these electrolytes ripe for commercialization. Here, we present a first-principles-based molecular dynamics (MD) study addressing in detail the properties of a sodium triflate WiS electrolyte for Na-ion batteries. We have developed a workflow based on a machine learning (ML) potential derived from ab initio MD simulations. As ML potentials are typically restricted to the interpolation of the data points of the training set and have hardly any predictive properties, we subsequently optimize a classical force field based on physics principles to ensure broad applicability and high performance. Performing and analyzing detailed MD simulations, we identify several very promising properties of the sodium triflate as a WiS electrolyte but also indicate some potential stability challenges associated with its use as a battery electrolyte.

A 2.5 V In-Plane Flexi-Pseudocapacitor with Unprecedented Energy and Cycling Efficiency for All-Weather Applications.

As electronic devices for aviation, space, and satellite applications become more sophisticated, built-in energy storage devices also require a wider temperature spectrum. Herein, an all-climate operational, energy and power-dense, flexible, in-plane symmetric pseudocapacitor is demonstrated with utmost operational safety and long cycle life. The device is constructed with interdigital-patterned laser-scribed carbon-supported electrodeposited V5O12·6H2O as a binder-free electrode and a novel high-voltage anti-freezing water-in-salt-hybrid electrolyte. The anti-freezing electrolyte can operate over a wide temperature range of -40-60 °C while offering a stable potential window of ≈2.5 V. The device undergoes rigorous testing under diverse environmental conditions, including rapid and regular temperature and mechanical transition over multiple cycles. Additionally, detailed theoretical simulation studies are performed to understand the interfacial interactions with the active material as well as the local behavior of the anti-freeze electrolyte at different temperatures. As a result, the all-weather pseudocapacitor at 1 A g-1 shows a high areal capacitance of 234.7 mF cm-2 at room temperature and maintains a high capacitance of 129.8 mF cm-2 even at -40 °C. Besides, the cell operates very reliably for over 80 950 cycles with a capacitance of 25.7 mF cm-2 at 10 A g-1 and exhibits excellent flexibility and bendability under different stress conditions.

Boosting the Energy Density of Bowl-Like MnO2@Carbon Through Lithium-Intercalation in a High-Voltage Asymmetric Supercapacitor with "Water-In-Salt" Electrolyte.

Highly concentrated "'water-in-salt"' (WIS) electrolytes are promising for high-performance energy storage devices due to their wide electrochemical stability window. However, the energy storage mechanism of MnO2 in WIS electrolytes-based supercapacitors remains unclear. Herein, MnO2 nanoflowers are successfully grown on mesoporous bowl-like carbon (MBC) particles to generate MnO2/MBC composites, which not only increase electroactive sites and inhibit the pulverization of MnO2 particles during the fast charging/discharging processes, but also facilitate the electron transfer and ion diffusion within the whole electrode, resulting in significant enhancement of the electrochemical performance. An asymmetric supercapacitor, assembled with MnO2/MBC and activated carbon (AC) and using 21 m LiTFSI solution as the WIS electrolyte, delivers an ultrahigh energy density of 70.2 Wh kg-1 at 700 W kg-1, and still retains 24.8 Wh kg-1 when the power density is increased to 28 kW kg-1. The ex situ XRD, Raman, and XPS measurements reveal that a reversible reaction of MnO2 + xLi+ + xe-↔LixMnO2 takes place during charging and discharging. Therefore, the asymmetric MnO2/MBC//AC supercapacitor with LiTFSI electrolyte is actually a lithium-ion hybrid supercapacitor, which can greatly boost the energy density of the assembled device and expand the voltage window.

Reverse Dual-Ion Battery Enabled by Reversing the Cation/Anion Storage Mechanism in an Aqueous ZnCl2 Water-in-Salt Electrolyte.

Dual ion batteries (DIBs) have garnered significant attention from researchers due to their unique ability to store charges using electrolyte-born ions, making them promising candidates for grid storage applications. However, despite extensive efforts to explore DIBs with various electrolytes, such as organic, aqueous, gel polymer etc., challenges such as electrolyte decomposition and poor stability of anode materials in aqueous electrolytes remain unresolved. To address these issues, we report a novel approach utilizing a flip-cum-reverse sequence of anion/cation storage chemistry in a ZnCl2 water-in-salt electrolyte (ZnCl2 -WiSE)-based reverse dual ion battery (RDIB), employing Zn-based Prussian blue analogue i. e., Zn3 [Fe(CN)6 ]2 and ferrocene-carbon composite (FcC) as cathode and anode electrodes, respectively. The RDIB operates in the opposite direction compared to conventional DIBs, offering a fresh perspective. Through our investigations, we discovered that increasing the concentration of ZnCl2 -WiSE [ZnCl2 -WiSE] resulted in a positive shift of 270 mV in the redox potential for cation/anion (de)insertion at the cathode, and a negative shift of 70 mV at the anode, indicating enhanced performance. Remarkably, the RDIB operate in 10 m ZnCl2 -WiSE exhibited an impressive energy density of 23 Wh kg-1 , showcasing the potential of this approach for high-performance energy storage.

Visualizing Water Reduction with Diazonium Grafting on a Glassy Carbon Electrode Surface in a Water-in-Salt Electrolyte.

Aqueous batteries are regaining interest, thanks to the extended working stability voltage window in a highly concentrated electrolyte, namely the water-in-salt electrolyte. A solid-electrolyte interphase (SEI) forms on the negative electrode to prevent water access to the electrode surface. However, we further reported that the formed SEI layer was not uniform on the surface of the glassy carbon electrode. The SEI after passivation will also show degradation during the remaining time of open-circuit voltage (OCV); hence, it calls for a more stable passivation layer to cover the electrode surface. Here, a surface modification was successfully achieved via artificial diazonium grafting using monomers, such as poly(ethylene glycol), α-methoxy, ω-allyloxy (PEG), and allyl glycidyl cyclocarbonate (AGC), on glassy carbon. Physical and electrochemical measurements indicated that the hydrophobic layer composed of PEG or AGC species was well grafted on the electrode surface. The grafted hydrophobic coatings could protect the electrode surface from the water molecules in the bulk electrolyte and then suppress the free water decomposition (from LSV) but still migrating lithium ions. Furthermore, multiple cycles of CV with one-hour resting OCV identified the good stability of the hydrophobic grafting layer, which is a highlight compared with our precious work. These findings relying on the diazonium grafting design may offer a new strategy to construct a stable artificial SEI layer that can well protect the electrode surface from the free water molecule.

All-climate aqueous Na-ion batteries using "water-in-salt" electrolyte.

Aqueous Na-ion batteries have been extensively studied for large-scale energy storage systems. However, their wide application is still limited by their inferior cycle stability (<3000 cycles) and poor temperature tolerance. Furthermore, many of the reported high rate behaviors are achieved at a low mass loading (<3 mg cm-2) of the electrodes. Herein, we propose an aqueous Na-ion battery which includes a Ni-based Prussian blue (NiHCF) cathode, a carbonyl-based organic compound, 5,7,12,14-pentacenetetrone (PT) anode and a "water-in-salt" electrolyte (17 mol kg-1 NaClO4 in water). Its operation involves the reversible coordination reaction of the PT anode and the extraction/insertion of Na+ in the NiHCF cathode. It is demonstrated that the wide internal spaces of the PT anode and NiHCF cathode can not only buffer the volumetric change induced by Na+ storage, but also enable fast kinetics. The full cell exhibits a supercapacitor-like rate performance of 50 A g-1 (corresponding to a discharge or charge within 6.3 s) and a super-long lifespan of 15,000 cycles. Moreover, the excellent rate performance can still be preserved even with a high mass loading of the electrodes (15 mgNiHCF cm-2 and 8 mgPT cm-2). Especially, the cell can work well in a wide temperature range, from -40 to 100 °C, showing a typical all-climate operation.

Tuning the Electrolyte Solvation Structure via a Nonaqueous Co-Solvent to Enable High-Voltage Aqueous Lithium-Ion Batteries.

"Water-in-salt" electrolytes have significantly expanded the electrochemical stability window of the aqueous electrolytes from 1.23 to 3 V, making highly safe 3.0 V aqueous Li-ion batteries possible. However, the awkward cathodic limit located at 1.9 V (versus Li+/Li) and the high cost of the expensive salts hinder the practical applications. In this work, an ideal "bisolvent-in-salt" electrolyte is reported to tune the electrolyte solvation structure via introducing sulfolane as the co-solvent, which significantly enhances the cathodic limit of water to 1.0 V (versus Li+/Li) at a significantly reduced salt concentration of 5.7 mol kg-1. Due to the competitive coordination of sulfolane, water molecules that should be in the primary solvation sheath of Li+ are partly substituted by the electrochemically stable sulfolane, significantly decreasing the hydrogen evolution. Meanwhile, the unique electrolyte structures enable the formation and stabilization of a robust solid electrolyte interphase. As a result, a 2.4 V LiMn2O4/Li4Ti5O12 full cell with a high energy density of 128 Wh kg-1 is realized. The hybrid water/sulfolane electrolytes provide a brand new strategy for designing aqueous electrolytes with an expanded electrochemical stability window at a low salt concentration.

Reconstructing Vanadium Oxide with Anisotropic Pathways for a Durable and Fast Aqueous K-Ion Battery.

Aqueous potassium-ion batteries are long-term pursued, due to their excellent performance and intrinsic superiority in safe, low-cost storage for portable and grid-scale applications. However, the notorious issues of K-ion battery chemistry are the inferior cycling stability and poor rate performance, due to the inevitably destabilization of the crystal structure caused by K-ions with pronouncedly large ionic radius. Here, we resolve such issues by reconstructing commercial vanadium oxide (α-V2O5) into the bronze form, i.e., δ-K0.5V2O5 (KVO) nanobelts, as cathode materials with layered structure of enlarged space and anisotropic pathways for K-ion storage. Specifically, it can deliver a high capacity as 116 mAh g-1 at the 1 C-rate, an outstanding rate capacity of 65 mAh g-1 at 50 C, and a robust cyclic stability with 88.2% capacity retention after 1,000 cycles at 1 C. When coupled with organic anode in a full-cell configuration, the KVO electrodes can output 95 mAh g-1 at 1 C and cyclic stability with 77.3% capacity retention after 20,000 cycles at 10 C. According to experimental and calculational results, the ultradurable cyclic performance is assigned to the robust structural reversibility of the KVO electrode, and the ultrahigh-rate capability is attributed to the anisotropic pathways with improved electrical conductivity in KVO nanobelts. In addition, applying a 22 M KCF3SO3 water-in-salt electrolyte can impede the dissolving issues of the KVO electrode and further stabilize the battery cyclic performance. Lastly, the as-designed AKIBs can operate with superior low-temperature adaptivity even at -30 °C. Overall, the KVO electrode can serve as a paradigm toward developing more suitable electrode materials for high-performance AKIBs.

Microbe-Assisted Nanocomposite Anodes for Aqueous Li-Ion Batteries.

With the rapid increase in the use of lithium-ion batteries (LIBs), the development of safe LIBs has become an important social issue. Replacing flammable organic liquid electrolytes in current LIBs with water can be an alternative route to resolve this safety concern. The water-in-salt (WIS) electrolytes received great attention as next-generation electrolytes due to their large electrochemical stability window. However, their high cathodic limit remains as a challenge, impeding the use of low-potential anodes. Here, we report the first biodirected synthesis of carbonaceous layers on anodes to use them as interlayers that prevent a direct contact of water molecules to anode particles. High-aspect ratio microbes are utilized as precursors of carbonaceous layers on TiO2 nanoparticles (m-TiO2) to enhance the conductivity and to reduce the electrolysis of WIS electrolytes. We selected the cylindrical shape of microbes that offers geometric diversity, providing us a toolkit to investigate the effect of microbe length in forming the network in binary composites and their impacts on the battery performance with WIS electrolytes. Using microbes with varying aspect ratios, the optimal microbe size to maximize the battery performance is determined. The effects of storage time on microbe size are also studied. Compared to uncoated TiO2 anodes, m-TiO2 exhibited 49% higher capacity at the 40th cycle and enhanced the cycle life close to anodes made with a conventional carbon precursor while using an 11% less amount of carbon. We performed density functional theory calculations to unravel the underlying mechanism of the performance improvement using microbe-derived carbon layers. Computational results show that high amounts of pyridinic nitrogen present in the peptide bonds in microbes are expected to slow down the water diffusion. Our findings provide key insights into the design of an interlayer for WIS anodes and open an avenue to fabricate energy storage materials using biomaterials.

Stabilizing the Solid-Electrolyte Interphase with Polyacrylamide for High-Voltage Aqueous Lithium-Ion Batteries.

The introduction of "water-in-salt" electrolyte (WiSE) concept opens a new horizon to aqueous electrochemistry that is benefited from the formation of a solid-electrolyte interphase (SEI). However, such SEI still faces multiple challenges, including dissolution, mechanical damaging, and incessant reforming, which result in poor cycling stability. Here, we report a polymeric additive, polyacrylamide (PAM) that effectively stabilizes the interphase in WiSE. With the addition of 5 molar % PAM to 21 mol kg-1 LiTFSI electrolyte, a LiMn2 O4 ∥L-TiO2 full cell exhibits enhanced cycling stability with 86 % capacity retention after 100 cycles at 1 C. The formation mechanism and evolution of PAM-assisted SEI was investigated using operando small angle neutron scattering and density functional theory (DFT) calculations, which reveal that PAM minimizes the presence of free water molecules at the anode/electrolyte interface, accelerates the TFSI- anion decomposition, and densifies the SEI.

Localized Water-In-Salt Electrolyte for Aqueous Lithium-Ion Batteries.

Water-in-salt (WIS) electrolytes using super-concentrated organic lithium (Li) salts are of interest for aqueous Li-ion batteries. However, the high salt cost, high viscosity, poor wettability, and environmental hazards remain a great challenge. Herein, we present a localized water-in-salt (LWIS) electrolyte based on low-cost lithium nitrate (LiNO3 ) salt and 1,5-pentanediol (PD) as inert diluent. The addition of PD maintains the solvation structure of the WIS electrolyte, improves the electrolyte stability via hydrogen-bonding interactions with water and NO3 - molecules, and reduces the total salt concentration. By in situ gelling the LWIS electrolyte with tetraethylene glycol diacrylate (TEGDA) monomer, the electrolyte stability window can be further expanded to 3.0 V. The as-developed Mo6 S8 |LWIS gel electrolyte|LiMn2 O4 (LMO) batteries delivered outstanding cycling performance with an average Coulombic efficiency of 98.53 % after 250 cycles at 1 C.

Interfacial Speciation Determines Interfacial Chemistry: X-ray-Induced Lithium Fluoride Formation from Water-in-salt Electrolytes on Solid Surfaces.

Super-concentrated "water-in-salt" electrolytes recently spurred resurgent interest for high energy density aqueous lithium-ion batteries. Thermodynamic stabilization at high concentrations and kinetic barriers towards interfacial water electrolysis significantly expand the electrochemical stability window, facilitating high voltage aqueous cells. Herein we investigated LiTFSI/H2 O electrolyte interfacial decomposition pathways in the "water-in-salt" and "salt-in-water" regimes using synchrotron X-rays, which produce electrons at the solid/electrolyte interface to mimic reductive environments, and simultaneously probe the structure of surface films using X-ray diffraction. We observed the surface-reduction of TFSI- at super-concentration, leading to lithium fluoride interphase formation, while precipitation of the lithium hydroxide was not observed. The mechanism behind this photoelectron-induced reduction was revealed to be concentration-dependent interfacial chemistry that only occurs among closely contact ion-pairs, which constitutes the rationale behind the "water-in-salt" concept.

Niobium Tungsten Oxide in a Green Water-in-Salt Electrolyte Enables Ultra-Stable Aqueous Lithium-Ion Capacitors.

Aqueous hybrid supercapacitors are attracting increasing attention due to their potential low cost, high safety and eco-friendliness. However, the narrow operating potential window of aqueous electrolyte and the lack of suitable negative electrode materials seriously hinder its future applications. Here, we explore high concentrated lithium acetate with high ionic conductivity of 65.5 mS cm-1 as a green "water-in-salt" electrolyte, providing wide voltage window up to 2.8 V. It facilitates the reversible function of niobium tungsten oxide, Nb18W16O93, that otherwise only operations in organic electrolytes previously. The Nb18W16O93 with lithium-ion intercalation pseudocapacitive behavior exhibits excellent rate performance, high areal capacity, and ultra-long cycling stability. An aqueous lithium-ion hybrid capacitor is developed by using Nb18W16O93 as negative electrode combined with graphene as positive electrode in lithium acetate-based "water-in-salt" electrolyte, delivering a high energy density of 41.9 W kg-1, high power density of 20,000 W kg-1 and unexceptionable stability of 50,000 cycles.

A Dual Plating Battery with the Iodine/[ZnIx (OH2 )4-x ]2-x Cathode.

Plating battery electrodes typically deliver higher specific capacity values than insertion or conversion electrodes because the ion charge carriers represent the sole electrode active mass, and a host electrode is unnecessary. However, reversible plating electrodes are rare for electronically insulating nonmetals. Now, a highly reversible iodine plating cathode is presented that operates on the redox couples of I2 /[ZnIx (OH2 )4-x ]2-x in a water-in-salt electrolyte. The iodine plating cathode with the theoretical capacity of 211 mAh g-1 plates on carbon fiber paper as the current collector, delivering a large areal capacity of 4 mAh cm-2 . Tunable femtosecond stimulated Raman spectroscopy coupled with DFT calculations elucidate a series of [ZnIx (OH2 )4-x ]2-x superhalide ions serving as iodide vehicles in the electrolyte, which eliminates most free iodide ions, thus preventing the consequent dissolution of the cathode-plated iodine as triiodides.

High Energy Density Micro-Supercapacitor Based on a Three-Dimensional Bicontinuous Porous Carbon with Interconnected Hierarchical Pores.

On-chip micro-supercapacitors (MSCs) have attracted great attention recently. However, the performance of MSCs is usually unsatisfactory because of the unreasonable pore structure. The construction of a three-dimensional (3D) interconnected porous carbon-based MSC by controllable activation is proposed. The porous monolithic carbon microelectrode activated by ZnO nanowires provides electron/ion bicontinuous conduction path. The fabricated MSC with this microelectrode rendered a high areal specific capacitance of 10.01 mF cm-2, 6 times higher than that of pure pyrolyzed carbon-based MSC, 1.6-5 times higher than that of the MSC with porous carbon activated by ZnO nanoparticles because of its cross-linking macropore-mesopore-micropore structure and considerable areal atomic ratio. The optimization mechanism of the hierarchical channel pore for the electrochemical performance of MSCs is investigated in detail. Four kinds of electrolytes, including H2SO4, redox additive KI/H2SO4, LiCl, and LiTFSi, are employed for constructing MSCs. The voltage window of water in a salt electrolyte assembled LiTFSi-MSC is expanded to 2.5 V. The energy density of LiTFSi-MSC is 6 times higher than that of H2SO4-MSC, which can drive light-emitting diodes without serial or parallel connection. This high-performance 3D interconnected porous carbon-based MSC shows a great potential in applications for large-scale integration of micro-/nanodevices.

Zn/V2O5 Aqueous Hybrid-Ion Battery with High Voltage Platform and Long Cycle Life.

Aqueous zinc-ion batteries attract increasing attention due to their low cost, high safety, and potential application in stationary energy storage. However, the simultaneous realization of high cycling stability and high energy density remains a major challenge. To tackle the above-mentioned challenge, we develop a novel Zn/V2O5 rechargeable aqueous hybrid-ion battery system by using porous V2O5 as the cathode and metallic zinc as the anode. The V2O5 cathode delivers a high discharge capacity of 238 mAh g-1 at 50 mA g-1. 80% of the initial discharge capacity can be retained after 2000 cycles at a high current density of 2000 mA g-1. Meanwhile, the application of a "water-in-salt" electrolyte results in the increase of discharge platform from 0.6 to 1.0 V. This work provides an effective strategy to simultaneously enhance the energy density and cycling stability of aqueous zinc ion-based batteries.

All-Organic Rechargeable Battery with Reversibility Supported by "Water-in-Salt" Electrolyte.

Rechargeable batteries with organic electrodes are preferred to those with transition-metal-containing electrodes for their environmental friendliness, and resource availability, but all such batteries reported to date are based on organic electrolytes, which raise concerns of safety and performance. Here an aqueous-electrolyte all-organic rechargeable battery is reported, with a maximum operating voltage of 2.1 V, in which polytriphenylamine (PTPAn) and 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA)-derived polyimide (PNTCDA) serve as cathode and anode material, respectively. A key feature of the design is use of a "water-in-salt" electrolyte to bind "free" water; this impedes the side reaction of water oxidation, thereby enabling excellent reversibility in aqueous solution. The battery can deliver a maximum energy density of 52.8 Wh kg-1 , which is close to most of the all-organic batteries with organic electrolytes. The battery exhibits a supercapacitor-like high power of 32 000 W kg-1 and a long cycle life (700 cycles with capacity retention of 85 %), due to the kinetics not being limited by ion diffusion at either electrode.