Fouling resistance investigations of seaweed products / Investigações de resistência à incrustação de produtos de algas marinhas

Any solid, unprotected, and undefended surface in the aquatic environment will be fouled. Fouling, on the other hand, can affect a wide range of species that can tolerate some epibiosis. Several others, on the other hand, aggressively keep the epibionts off their body surface (antifouling). Antifouling defenses are built into marine plants like seaweed and seagrass. They do have a distinctive surface structure with tightly packed needle-like peaks and antifouling coverings, which may hinder settling bacteria's ability to cling. Chemical antifouling resistance is most probably a biological reaction to epibiosis' ecological drawbacks, especially for organisms capable of performing photosynthesis. The goal of this study was to see how effective natural compounds derived from littoral seaweeds were in preventing fouling. The brown mussel, an important fouling organism, was evaluated in laboratory bioassays against fifty-one populations' crude organic extracts including fort-two macroalgae species. Antifouling activity, exhibited a distinct phylogenetic pattern, with red macroalgae having the largest share of active species, subsequently brown macroalgae. Antifouling action in green seaweeds has never been significant. Seven species showed some level of induced antifouling defense. Our findings appear to back up previous findings about secondary metabolite synthesis in seaweeds, indicating that in the hunt for novel antifoulants, researchers should concentrate their efforts on tropical red macroalgae.

Resumo contaminada. A incrustação, por outro lado, pode afetar uma ampla gama de espécies que podem tolerar alguma epibiose. Vários outros, por outro lado, mantêm agressivamente os epibiontes fora de sua superfície corporal (anti-incrustante). As defesas anti-incrustantes são construídas em plantas marinhas como algas marinhas e ervas marinhas. Elas têm uma estrutura de superfície distinta com picos semelhantes a agulhas bem compactadas e coberturas anti-incrustantes, o que pode dificultar a capacidade de fixação das bactérias. A resistência química anti-incrustante é provavelmente uma reação biológica às desvantagens ecológicas da epibiose, especialmente para organismos capazes de realizar fotossíntese. O objetivo deste estudo foi verificar a eficácia dos compostos naturais derivados de algas marinhas do litoral na prevenção da incrustação. O mexilhão-marrom, importante organismo incrustante, foi avaliado em bioensaios de laboratório contra extratos orgânicos brutos de 51 populações, incluindo duas espécies de macroalgas. A atividade anti-incrustante exibiu um padrão filogenético distinto, com macroalgas vermelhas tendo a maior participação de espécies ativas, posteriormente macroalgas marrons. A ação anti-incrustante em algas verdes nunca foi significativa. Sete espécies apresentaram algum nível de defesa anti-incrustante induzida. Nossas descobertas parecem corroborar descobertas anteriores sobre a síntese de metabólitos secundários em algas marinhas, indicando que, na busca por novos anti-incrustantes, os pesquisadores devem concentrar seus esforços em macroalgas vermelhas tropicais.

Enhancing quorum quenching media with 3D robust electrospinning coating: A novel biofouling control strategy for membrane bioreactors.

Bacterial quorum quenching (QQ) is an effective strategy for controlling biofouling in membrane bioreactor (MBR) by interfering the releasing and degradation of signal molecules during quorum sensing (QS) process. However, due to the framework feature of QQ media, the maintenance of QQ activity and the restriction of mass transfer threshold, it has been difficult to design a more stable and better performing structure in a long period of time. In this research, electrospun fiber coated hydrogel QQ beads (QQ-ECHB) were fabricated by using electrospun nanofiber coated hydrogel to strengthen layers of QQ carriers for the first time. The robust porous PVDF 3D nanofiber membrane was coated on the surface of millimeter-scale QQ hydrogel beads. Biocompatible hydrogel entrapping quorum quenching bacteria (sp.BH4) was employed as the core of the QQ-ECHB. In MBR with the addition of QQ-ECHB, the time to reach transmembrane pressure (TMP) of 40 kPa was 4 times longer than conventional MBR. The robust coating and porous microstructure of QQ-ECHB contributed to keeping a lasting QQ activity and stable physical washing effect at a very low dosage (10g beads/5L MBR). Physical stability and environmental-tolerance tests also verified that the carrier can maintain the structural strength and keep the core bacteria stable when suffering long-term cyclic compression and great fluctuations in sewage quality.

Cathodic biofouling control by microbial separators in air-breathing microbial fuel cells.

Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising eco-friendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 ± 1.3 and 17.3 ± 6.8 Ω, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 ± 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during long-term operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.

Cross-Linkable Polymer-Based Multi-layers for Protecting Electrochemical Glucose Biosensors against Uric Acid, Ascorbic Acid, and Biofouling Interferences.

The lifetime of implantable electrochemical glucose monitoring devices is limited due to the foreign body response and detrimental effects from ascorbic acid (AA) and uric acid (UA) interferents that are components of physiological media. Polymer coatings can be used to shield biosensors from these interferences and prolong their functional lifetime. This work explored several approaches to protect redox polymer-based glucose biosensors against such interferences by designing six targeted multi-layer sensor architectures. Biological interferents, like cells and proteins, and UA and AA interferents were found to have individual effects on the current density and operational stability of glucose biosensors, requiring individual protection and treatment. Protection against biofouling can be achieved using a poly(2-methacryloyloxyethyl phosphorylcholine-co-glycidyl methacrylate) (MPC) zwitterionic polymer coating. An enzyme-scavenging approach was compared to electrostatic repulsion by negatively charged polymers for protection against AA and UA interferences. A multi-layer novel polymer design (PD) system consisting of a cross-linkable negatively charged polyvinylimidazole-polysulfostyrene co-polymer inner layer and a cross-linkable MPC zwitterionic polymer outer layer showed the best protection against AA, UA, and biological interferences. The sensor protected using the novel PD shield displayed the lowest mean absolute relative difference between the glucose reading without the interferent and the reading value with the interferent present and also displayed the lowest variability in sensor readings in complex media. For sensor measurements in artificial plasma, the novel PD extends the linear range (R2 = 0.99) of the sensor from 0-10 mM for the control to 0-20 mM, shows a smaller decrease in sensitivity, and retains high current densities. The application of PD multi-target coating improves sensor performance in complex media and shows promise for use in sensors operating in real conditions.

Multifunctional Edible Oil-Impregnated Nanoporous Oxide Layer on AISI 304 Stainless Steel.

Slippery liquid-infused porous surface (SLIPS) realized on commercial materials provides various functionalities, such as corrosion resistance, condensation heat transfer, anti-fouling, de/anti-icing, and self-cleaning. In particular, perfluorinated lubricants infused in fluorocarbon-coated porous structures have showed exceptional performances with durability; however, they caused several issues in safety, due to their difficulty in degradation and bio-accumulation. Here, we introduce a new approach to create the multifunctional lubricant-impregnated surface with edible oils and fatty acid, which are also safe to human body and degradable in nature. The edible oil-impregnated anodized nanoporous stainless steel surface shows a significantly low contact angle hysteresis and sliding angle, which is similar with general surface of fluorocarbon lubricant-infused systems. The edible oil impregnated in the hydrophobic nanoporous oxide surface also inhibits the direct contact of external aqueous solution to a solid surface structure. Due to such de-wetting property caused by a lubricating effect of edible oils, the edible oil-impregnated stainless steel surface shows enhanced corrosion resistance, anti-biofouling and condensation heat transfer with reduced ice adhesion.

Photo-Fenton self-cleaning carbon fibers membrane supported with Zr-MOF@Fe2O3 for effective phosphate removal from algae-rich water.

Adsorbents featuring abundant binding sites and high affinity to phosphate have been used to resolve water eutrophication. However, most of the developed adsorbents were focused on improving the adsorption ability of phosphate but ignored the effect of biofouling on the adsorption process especially used in the eutrophic water body. Herein, a novel MOF-supported carbon fibers (CFs) membrane with high regeneration and antifouling capability, was prepared by in-situ synthesis of well-dispersed MOF on CFs membrane, to remove phosphate from algae-rich water. The hybrid UiO-66-(OH)2@Fe2O3@CFs membrane exhibits a maximum adsorption capacity of 333.3 mg g-1 (pH 7.0) and excellent selectivity for phosphate sorption over coexisting ions. Moreover, the Fe2O3 nanoparticles anchored on the surface of UiO-66-(OH)2 through 'phenol-Fe(III)' reaction can endow the membrane with the robust photo-Fenton catalytic activity, which improves long-term reusability even under algae-rich condition. After 4 times photo-Fenton regenerations, the regeneration efficiency of the membrane could remain 92.2%, higher than that of hydraulic cleaning (52.6%). Moreover, the growth of C. pyrenoidosa was significantly reduced by 45.8% within 20 days via metabolism inhibition due to membrane-induced P-deficient conditions. Hence, the developed UiO-66-(OH)2@Fe2O3@CFs membrane holds significant prospects for large-scale application in phosphate sequestration of eutrophic water bodies.

Week-Long Operation of Electrochemical Aptamer Sensors: New Insights into Self-Assembled Monolayer Degradation Mechanisms and Solutions for Stability in Serum at Body Temperature.

Conventional wisdom suggests that widely utilized self-assembled alkylthiolate monolayers on gold are too unstable to last more than several days when exposed to complex fluids such as raw serum at body temperature. Demonstrated here is that these monolayers can not only last at least 1 week under such harsh conditions but that significant applied value can be captured for continuous electrochemical aptamer biosensors. Electrochemical aptamer biosensors provide an ideal tool to investigate monolayer degradation, as aptamer sensors require a tightly packed monolayer to preserve sensor signal vs background current and readily reveal fouling by albumin and other solutes when operating in biofluids. Week-long operation in serum at 37 °C is achieved by (1) increasing van der Waals interactions between adjacent monolayer molecules to increase the activation energy required for desorption, (2) optimizing electrochemical measurement to decrease both alkylthiolate oxidation and electric-field-induced desorption, and (3) mitigating fouling using protective zwitterionic membranes and zwitterion-based blocking layers with antifouling properties. This work further proposes origins and mechanisms of monolayer degradation in a logical stepwise manner that was previously unobservable over multiday time scales. Several of the observed results are surprising, revealing that short-term improvements to sensor longevity (i.e., hours) actually increase sensor degradation in the longer term (i.e., days). The results and underlying insights on mechanisms not only push forward fundamental understanding of stability for self-assembled monolayers but also demonstrate an important milestone for continuous electrochemical aptamer biosensors.

Desalination technologies, membrane distillation, and electrospinning, an overview.

Water is a critical component for humans to survive, especially in arid lands or areas where fresh water is scarce. Hence, desalination is an excellent way to effectuate the increasing water demand. Membrane distillation (MD) technology entails a membrane-based non-isothermal prominent process used in various applications, for instance, water treatment and desalination. It is operable at low temperature and pressure, from which the heat demand for the process can be sustainably sourced from renewable solar energy and waste heat. In MD, the water vapors are gone through the membrane's pores and condense at permeate side, rejecting dissolved salts and non-volatile substances. However, the efficacy of water and biofouling are the main challenges for MD due to the lack of appropriate and versatile membrane. Numerous researchers have explored different membrane composites to overcome the above-said issue, and attempt to develop efficient, elegant, and biofouling-resistant novel membranes for MD. This review article addresses the 21st-century water crises, desalination technologies, principles of MD, the different properties of membrane composites alongside compositions and modules of membranes. The desired membrane characteristics, MD configurations, role of electrospinning in MD, characteristics and modifications of membranes used for MD are also highlighted in this review.

Investigation of Three-Dimensional Bacterial Adhesion Manner on Model Organic Surfaces Using Quartz Crystal Microbalance with Energy Dissipation Monitoring.

Bacterial biofilms reduce the performance and efficiency of biomedical and industrial devices. The initial step in forming bacterial biofilms is the weak and reversible attachment of the bacterial cells onto the surface. This is followed by bond maturation and secretion of polymeric substances, which initiate irreversible biofilm formation, resulting in stable biofilms. This implies that understanding the initial reversible stage of the adhesion process is crucial to prevent bacterial biofilm formation. In this study, we analyzed the adhesion processes of E. coli on self-assembled monolayers (SAMs) with different terminal groups using optical microscopy and quartz crystal microbalance with energy dissipation (QCM-D) monitoring. We found that a considerable number of bacterial cells adhere to hydrophobic (methyl-terminated) and hydrophilic protein-adsorbing (amine- and carboxy-terminated) SAMs forming dense bacterial adlayers while attaching weakly to hydrophilic protein-resisting SAMs [oligo(ethylene glycol) (OEG) and sulfobetaine (SB)], forming sparse but dissipative bacterial adlayers. Moreover, we observed positive shifts in the resonant frequency for the hydrophilic protein-resisting SAMs at high overtone numbers, suggesting how bacterial cells cling to the surface using their appendages as explained by the coupled-resonator model. By exploiting the differences in the acoustic wave penetration depths at each overtone, we estimated the distance of the bacterial cell body from different surfaces. The estimated distances provide a possible explanation for why bacterial cells tend to attach firmly to some surfaces and weakly to others. This result is correlated to the strength of the bacterium-substratum bonds at the interface. Elucidating how the bacterial cells adhere to different surface chemistries can be a suitable guide in identifying surfaces with a more significant probability of contamination by bacterial biofilms and designing bacteria-resistant surfaces and coatings with excellent bacterial antifouling characteristics.

Enhanced antifouling properties of marine antimicrobial peptides by PEGylation.

Covalent immobilisation of antimicrobial peptides (AMPs) on underwater surfaces to combat marine biofouling is of great interest as it is an efficient, broad-spectrum and environmentally friendly strategy. Similar to post-translational modifications of natural proteins, artificial modifications of antimicrobial peptides can introduce important impacts on their properties and functions. The present work revealed the enhanced effect of PEGylation on the antifouling properties of marine antimicrobial peptides (LWFYTMWH) through grafting the modified peptides on aluminium surfaces. PEG was coupled to the peptide by solid-phase peptide synthesis, and the PEGylated peptides were bioconjugated to the aluminium surfaces which was pre-treated by aryldiazonium salts to introduce carboxyl groups. The carboxy group has been activated through the reaction with 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride and N-hydroxysuccinimide. The successful modification was confirmed via FT-IR and XPS. Interestingly, the PEGylated peptides modified surfaces could kill 90.0% Escherichia coli (Gram-negative) and 76.1% Bacillus sp. (Gram-positive), and showed better antifouling performance than the original peptides modified surfaces. Furthermore, molecular dynamics simulations showed PEGylation could enhance the ability of peptides to destroy membrane. The PEGylated peptides inserted into the membrane and induced the change in local curvature of membrane, leading to the rupture of membrane. The presence of PEG changed the antimicrobial peptides into more flexible conformations and the high hydrophilicity of PEG hindered the settlement of bacteria. These might be the two main working mechanisms for the increased antifouling efficiency of PEGylated peptides modified surface. This study provided a feasible modification strategy of antimicrobial peptides to enhance their antifouling properties.

Graphene-Based Coating to Mitigate Biofilm Development in Marine Environments.

Due to its several economic and ecological consequences, biofouling is a widely recognized concern in the marine sector. The search for non-biocide-release antifouling coatings has been on the rise, with carbon-nanocoated surfaces showing promising activity. This work aimed to study the impact of pristine graphene nanoplatelets (GNP) on biofilm development through the representative marine bacteria Cobetia marina and to investigate the antibacterial mechanisms of action of this material. For this purpose, a flow cytometric analysis was performed and a GNP/polydimethylsiloxane (PDMS) surface containing 5 wt% GNP (G5/PDMS) was produced, characterized, and assessed regarding its biofilm mitigation potential over 42 days in controlled hydrodynamic conditions that mimic marine environments. Flow cytometry revealed membrane damage, greater metabolic activity, and endogenous reactive oxygen species (ROS) production by C. marina when exposed to GNP 5% (w/v) for 24 h. In addition, C. marina biofilms formed on G5/PDMS showed consistently lower cell count and thickness (up to 43% reductions) than PDMS. Biofilm architecture analysis indicated that mature biofilms developed on the graphene-based surface had fewer empty spaces (34% reduction) and reduced biovolume (25% reduction) compared to PDMS. Overall, the GNP-based surface inhibited C. marina biofilm development, showing promising potential as a marine antifouling coating.

Virtual Screening of a Library of Naturally Occurring Anthraquinones for Potential Anti-Fouling Agents.

Marine biofouling is the undesired accumulation of organic molecules, microorganisms, macroalgae, marine invertebrates, and their by-products on submerged surfaces. It is a serious challenge for marine vessels and the oil, gas, and renewable energy industries, as biofouling can cause economic losses for these industries. Natural products have been an abundant source of therapeutics since the start of civilisation. Their use as novel anti-fouling agents is a promising approach for replacing currently used, harmful anti-fouling agents. Anthraquinones (AQs) have been used for centuries in the food, pharmaceutical, cosmetics, and paint industries. Citreorosein and emodin are typical additives used in the anti-fouling paint industry to help improve the global problem of biofouling. This study is based on our previous study, in which we presented the promising activity of structurally related anthraquinone compounds against biofilm-forming marine bacteria. To help uncover the anti-fouling potential of other AQ-related structures, 2194 compounds from the COCONUT natural products database were analysed. Molecular docking analysis was performed to assess the binding strength of these compounds to the LuxP protein in Vibrio carchariae. The LuxP protein is a vital binding protein responsible for the movements of autoinducers within the quorum sensing system; hence, interrupting the process at an early stage could be an effective strategy. Seventy-six AQ structures were found to be highly docked, and eight of these structures were used in structure-based pharmacophore modelling, resulting in six unique pharmacophore features.

Blocking bacterial appendage attachment to wastewater treatment membranes using anti-adhesins.

Membrane bioreactors (MBRs) suffer from high operational and cleaning costs due to biofouling. The biofouling begins when the adhesins (an anchor-type epitope made up of polar and charged amino acids) on microbial appendages bind to the surface. Two different compounds-dodecyl-ß-D-maltoside (DDM) and methyl α-d-mannopyranoside (MeαMan)-were investigated as possible biofilm mitigation tools due to their documented anti-adhesin properties in the biomedical field. DDM prevented up to 56.3, 87.0, and 67.6% of the formation of Pseudomonas putida, Escherichia coli and wastewater culture biofilms, respectively, in microplate experiments. MeαMan increased biofilm in the microplates. In a biofilm reactor setting, DDM was then applied on typical membrane materials, polyvinylidene fluoride, polyamide, polyether-sulfone, and polyacrylonitrile and prevented 79.4, 62.5, 81.3, and 68.2% of the detectable wastewater culture biofilm formation, respectively. The mechanism of anti-adhesion was the binding of the polar head of the DDM to the polar amino acids of the microbial appendages in conjunction with the orientation of the DDM as it binds different membrane materials. If the anti-adhesins are effective at increasing the distance of the bacteria from the membrane materials, they will serve as a new method for delaying biofouling.

Initiating guidance values for novel biological stability parameters in drinking water to control regrowth in the distribution system.

Nine novel biological stability parameters for drinking water have been developed recently. Here, we report data for these nine parameters in treated water from 34 treatment plants in the Netherlands to deduce guidance values for these parameters. Most parameters did not show a strong correlation with another biological stability parameter in the same sample, demonstrating that most parameters hold different information on the biological stability of drinking water. Furthermore, the novel biological stability parameters in treated water varied considerably between plants and five parameters in treated water were significantly lower for drinking water produced from groundwater than surface water. The maximum biomass concentration (MBC7), cumulative biomass potential (CBP14) from the biomass production potential test (BPP-W) and the total organic carbon concentration in treated water from groundwater were predictive parameters for HPC22 and Aeromonas regrowth in the distribution system. Guidance values of 8.6 ng ATP L-1, 110 d·ng ATP L-1 and 4.1 mg C L-1 were deduced for these parameters, under which the HPC22 and Aeromonas numbers remain at regulatory level. The maximum biomass growth (MBG7) from the BPP-W test, the particulate and/or high molecular organic carbon and the iron accumulation rate in treated water from surface water were predictive parameters for HPC22 and Aeromonas regrowth in the distribution system. Deduced guidance values for these biological stability parameters were 4.5 ng ATP L-1, 47 µg C L-1 and 0.34 mg Fe m-2 day-1, respectively. We conclude from our study that a multiple parameter assessment is required to reliable describe the biological stability of drinking water, that the biological stability of drinking water produced from groundwater is described with other parameters than the biological stability of drinking water produced from surface water, and that guidance values for predictive biological stability parameters were inferred under which HPC22 and Aeromonas regrowth is under control.

The factors influencing the vertical transport of microplastics in marine environment: A review.

There have been numerous studies that have identified the presence of low-density microplastics (MPs) in the water column and sediments. The focus of current MPs research has shifted towards the interaction of MPs with marine organisms and their potential hazards, including the uptake characteristics, biological transport and toxicological effects of MPs, but the processes involved in the deposition behavior of MPs are still poorly understood. In this review, we summarize the current state of knowledge on the vertical transport of MPs influenced by their physicochemical properties and marine organisms, and discuss their potential impact on MPs deposition. The physicochemical properties of MPs determine their initial distribution. The density, shape, and size of MPs influence their settling state in the marine environment. Marine biota play a key role in the transport of MPs to deep marine environment, mainly by changing the density and adsorption of MPs. Biofouling can alter the surface properties of MPs and increase the overall density, thus affecting the vertical flux of the plastic. Macroalgae may trap MPs particles by producing chemicals or by using electrostatic interactions. Marine swimming organisms ingest MPs and excrete them encapsulated in fecal particles, while the activity of marine benthic organisms may contribute to the transfer of MPs from surface sediments to deeper layers. In addition, MPs may be incorporated into organic particles produced by marine organisms such as marine snow or marine aggregates, increasing the vertical flux of MPs. However, due to the complexity of different sea areas and MPs properties, the deposition behavior of MPs may be the result of the interaction of multiple factors. Thus, the effects of MPs properties, marine organisms and the natural environment on MPs deposition in marine environment needs further research to fill this gap.

In the aftermath of Hurricane Irma: Colonization of a 4-year-old shipwreck by native and non-native corals, including a new cryptogenic species for the Caribbean.

Little is known about early coral settlement on shipwrecks with regard to their species and size compositions. Hurricanes in the Caribbean have a long history of sinking ships but a link with new coral settlement is understudied. In 2017, Hurricane Irma caused the sinking of over 300 vessels in the coastal waters of Saint Martin, eastern Caribbean. In 2021, coral settlement was studied on one of them, which included two native, one non-native, and two cryptogenic species. The corals were smaller than 8 cm in diameter. The invasive Tubastraea coccinea was the most abundant scleractinian and was predominantly represented by juveniles. A cryptogenic species, Stragulum bicolor, new for the Caribbean, was the most common octocoral. Because they can be harmful to the environment, shipwrecks should be monitored frequently for the occurrence of non-native species, especially when they are only a few years old.

The dynamics of biofouled particles in vortical flows.

When using mathematical models to predict the pathways of biofouled microplastic in the ocean, it is necessary to parametrise the impact of turbulence on their motions. In this paper, statistics on particle motion have been computed from simulations of small, spherical particles with time-dependent mass in cellular flow fields. The cellular flows are a prototype for Langmuir circulation and flows dominated by vortical motion. Upwelling regions lead to particle suspension and particles fall out at different times. The uncertainty of fallout time and a particle's vertical position is quantified across a range of parameters. A slight increase in settling velocities, for short times, is observed for particles with inertia due to clustering in fast downwelling regions for steady, background flow. For particles in time-dependent, chaotic flows, uncertainty is significantly reduced and we observe no significant increase in the average settling rates due to inertial effects.

Nature-Inspired Surface Structures Design for Antimicrobial Applications.

Surface contamination by microorganisms such as viruses and bacteria may simultaneously aggravate the biofouling of surfaces and infection of wounds and promote cross-species transmission and the rapid evolution of microbes in emerging diseases. In addition, natural surface structures with unique anti-biofouling properties may be used as guide templates for the development of functional antimicrobial surfaces. Further, these structure-related antimicrobial surfaces can be categorized into microbicidal and anti-biofouling surfaces. This review introduces the recent advances in the development of microbicidal and anti-biofouling surfaces inspired by natural structures and discusses the related antimicrobial mechanisms, surface topography design, material application, manufacturing techniques, and antimicrobial efficiencies.

A transient biological fouling model for constant flux microfiltration.

Microfiltration is a widely used engineering technology for fresh water production and water treatment. The major concern in many applications is the formation of a biological fouling layer leading to increased hydraulic resistance and flux decline during membrane operations. The growth of bacteria constituting such a biological layer implicates the formation of a multispecies biofilm and the consequent increase of operational costs for reactor management and cleaning procedures. To predict the biofouling evolution, a mono-dimensional continuous free boundary model describing biofilm dynamics and EPS production in different operational phases of microfiltration systems has been well studied. The biofouling growth is governed by a system of hyperbolic PDEs. Substrate dynamics are modeled through parabolic equations accounting for diffusive and advective fluxes generated during the filtration process. The free boundary evolution depends on both microbial growth and detachment processes. What is not addressed is the interplay between biofilm dynamics, filtration, and water recovery. In this study, filtration and biofilm growth modeling principles have been coupled for the definition of an original mathematical model able to reproduce biofouling evolution in membrane systems. The model has been solved numerically to simulate biologically relevant conditions, and to investigate the hydraulic behavior of the membrane. It has been calibrated and validated using lab-scale data. Numerical results accurately predicted the pressure drop occurring in the microfiltration system. A calibrated model can give information for optimization protocols as well as fouling prevention strategies.