RESUMO
The present study aimed to assess the occurrence and counts of Staphylococcus aureus in Brazilian artisanal cheeses (BAC) produced in five regions of Brazil: Coalho and Manteiga (Northeast region); Colonial and Serrano (South); Caipira (Central-West); Marajó (North); and Minas Artisanal cheeses, from Araxá, Campos das Vertentes, Cerrado, Serro and Canastra microregions (Southeast). The resistance to chlorine-based sanitizers, ability to attach to stainless steel surfaces, and antibiogram profile of a large set of S. aureus strains (n = 585) were assessed. Further, a total of 42 isolates were evaluated for the presence of enterotoxigenic genes (sea, seb, sec, sed, see, seg, sei, sej, and ser) and submitted to typing using pulsed-field gel electrophoresis (PFGE). BAC presented high counts of S. aureus (3.4-6.4 log CFU/g), varying from 25 to 62.5%. From the S. aureus strains (n = 585) assessed, 16% could resist 200 ppm of sodium hypochlorite, whereas 87.6% produced strong ability to attach to stainless steel surfaces, corroborating with S. aureus ability to persist and spread in the environment. Furthermore, the relatively high frequency (80.5%) of multidrug-resistant S. aureus and the presence of enterotoxin genes in 92.6% of the strains is of utmost attention. It reveals the lurking threat of SFP that can survive when conditions are favorable. The presence of enterotoxigenic and antimicrobial-resistant strains of S. aureus in cheese constitutes a potential risk to public health. This result calls for better control of cheese contamination sources, and taking hygienic measures is necessary for food safety. More attention should be paid to animal welfare and hygiene practices in some dairy farms during manufacturing to enhance the microbiological quality of traditional cheese products.
Assuntos
Queijo , Staphylococcus aureus Resistente à Meticilina , Infecções Estafilocócicas , Animais , Staphylococcus aureus/genética , Queijo/microbiologia , Brasil , Microbiologia de Alimentos , Aço Inoxidável/análise , Enterotoxinas/genética , Leite/microbiologiaRESUMO
The effect of lactocin AL705, bacteriocin produced by Latilactobacillus (Lat.) curvatus CRL1579 against Listeria biofilms on stainless steel (SS) and polytetrafluoroethylene (PTFE) coupons at 10 °C was investigated. L. monocytogenes FBUNT showed the greatest adhesion on both surfaces associated to the hydrophobicity of cell surface. Partially purified bacteriocin (800 UA/mL) effectively inhibited L. monocytogenes preformed biofilm through displacement strategy, reducing the pathogen by 5.54 ± 0.26 and 4.74 ± 0.05 log cycles at 3 and 6 days, respectively. The bacteriocin-producer decreased the pathogen biofilm by â¼2.84 log cycles. Control and Bac- treated samples reached cell counts of 7.05 ± 0.18 and 6.79 ± 0.06 log CFU/cm2 after 6 days of incubation. Confocal scanning laser microscopy (CLSM) allowed visualizing the inhibitory effect of lactocin AL705 on L. monocytogenes preformed biofilms under static and hydrodynamic flow conditions. A greater effect of the bacteriocin was found at 3 days independently of the surface matrix and pathogen growth conditions at 10 °C. As a more realistic approach, biofilm displacement strategy under continuous flow conditions showed a significant loss of biomass, mean thickness and substratum coverage of pathogen biofilm. These findings highlight the anti-biofilm capacity of lactocin AL705 and their potential application in food industries.
Assuntos
Bacteriocinas , Listeria monocytogenes , Listeria , Biofilmes , Bacteriocinas/farmacologia , Lactobacillus , Aço Inoxidável/análise , Microbiologia de AlimentosRESUMO
Listeria monocytogenes biofilms present a significant challenge in the food industry. This study explores the impact of different acidic conditions of culture media and food matrices on the development and removal of biofilms developed on stainless steel surfaces by wild-type (WT) L. monocytogenes strains as well as in two mutant derivatives, ΔsigB and ΔagrA, that have defects in the general stress response and quorum sensing, respectively. Additionally, the study investigates the efficacy of nanoencapsulated carvacrol as an antimicrobial against L. monocytogenes biofilms developed in Tryptic Soy Broth (TSB) culture media acidified to different pH conditions (3.5, 4.5, 5.5, 6.5), and in food substrates (apple juice, strained yogurt, vegetable soup, semi-skimmed milk) having the same pH levels. No biofilm formation was observed for all L. monocytogenes strains at pH levels of 3.5 and 4.5 in both culture media and food substrates. However, at pH 5.5 and 6.5, increased biofilm levels were observed in both the culture media and food substrates, with the WT strain showing significantly higher biofilm formation (3.04-6.05 log CFU cm-2) than the mutant strains (2.30-5.48 log CFU cm-2). For both applications, the nanoencapsulated carvacrol demonstrated more potent antimicrobial activity against biofilms developed at pH 5.5 with 2.23 to 3.61 log reductions, compared to 1.58-2.95 log reductions at pH 6.5, with mutants being more vulnerable in acidic environments. In food substrates, nanoencapsulated carvacrol induced lower log reductions (1.58-2.90) than the ones in TSB (2.02-3.61). These findings provide valuable insights into the impact of different acidic conditions on the development of L. monocytogenes biofilms on stainless steel surfaces and the potential application of nanoencapsulated carvacrol as a biofilm control agent in food processing environments.
Assuntos
Anti-Infecciosos , Cimenos , Listeria monocytogenes , Aço Inoxidável/análise , Biofilmes , Meios de Cultura , Microbiologia de Alimentos , Contagem de Colônia MicrobianaRESUMO
Fresh produce and animal-based products contaminated with Listeria monocytogenes have been the main cause of listeriosis outbreaks for many years. The present investigation explored the potential of combination treatment of disinfectants with a bacteriophage cocktail to control L. monocytogenes contamination in the food industry. A mixture of 1 minimal inhibitory concentration (MIC) of disinfectants (sodium hypochlorite [NaOCl], hydrogen peroxide [H2O2], and lactic acid [LA]) and multiplicity of infection (MOI) 100 of phage cocktail was applied to both planktonic cells in vitro and already-formed biofilm cells on food contact materials (FCMs; polyethylene, polypropylene, and stainless steel) and foods (celery and chicken meat). All the combinations significantly lowered the population, biofilm-forming ability, and the expression of flaA, motB, hlyA, prfA, actA, and sigB genes of L. monocytogenes. Additionally, in the antibiofilm test, approximately 4 log CFU/cm2 was eradicated by 6 h treatment on FCMs, and 3 log CFU/g was eradicated within 3 days on celery. However, <2 log CFU/g was eradicated in chicken meat, and regrowth of L. monocytogenes was observed on foods after 5 days. The biofilm eradication efficacy of the combination treatment was proven through visualization using scanning electron microscopy (SEM) and confocal microscopy. In the SEM images, the unusual behavior of L. monocytogenes invading from the surface to the inside was observed after treating celery with NaOCl+P or H2O2 + P. These results suggested that combination of disinfectants (NaOCl, H2O2, and LA) with Listeria-specific phage cocktail can be employed in the food industry as a novel antimicrobial and antibiofilm approach, and further research of L. monocytogenes behavior after disinfection is needed.
Assuntos
Bacteriófagos , Desinfetantes , Listeria monocytogenes , Animais , Desinfetantes/farmacologia , Peróxido de Hidrogênio/farmacologia , Contagem de Colônia Microbiana , Biofilmes , Indústria de Processamento de Alimentos , Aço Inoxidável/análise , Microbiologia de AlimentosRESUMO
The use of air jet impingement to remove residues from surfaces in food manufacturing operations offers an alternative to the use of water and liquid cleaning agents. During this investigation, air impingement was used to remove nonfat dry milk (NFDM) residues from a stainless-steel surface. The influence of the water activity (aw ) of the residue, the time after the residue reached an equilibrium water activity, and the thickness of residue at the time of removal from the surface have been investigated. All three factors had a significant effect on the time for removal. An increase in the water activity, the time at equilibrium, the sample thickness, or a combination of all three resulted in an increase in the time required to remove the deposits. Visible changes in the structure of deposits were observed as NFDM samples equilibrated to water activities above 0.43. NFDM residues with water activities less than 0.33 were removed within 1 s of using air impingement regardless of wall shear stress. When the water activities were greater than 0.50, the thickness of deposit was greater than 1 mm, and the time after reaching an equilibrium water activity was over 7 days, more than 5 min of air impingement with wall shear stress over 9.48 Pa was required to remove the residue. The results from these experiments indicated that air impingement has the potential to provide effective cleaning in manufacturing facilities for low-moisture foods. PRACTICAL APPLICATION: The introduction of water in low-moisture food environments is often undesirable due to the possibility of pathogenic microorganism growth. The normal cleaning operations in the food industry use water as a cleaning agent. This study evaluates the application of air impingement technology as a dry-cleaning method.
Assuntos
Leite , Aço Inoxidável , Animais , Leite/química , Aço Inoxidável/análise , Indústria de Processamento de Alimentos , Água/análise , Alérgenos/análiseRESUMO
Food-contact surfaces showing signs of wear pose a substantial risk of Listeria monocytogenes contamination and may serve as persistent sources of cross-contamination in fresh produce packinghouses. This study offers a comprehensive exploration into the influence of surface defects on the efficacies of commonly used sanitizers against L. monocytogenes biofilms on major food-contact surfaces. The 7-day-old L. monocytogenes biofilms were cultivated on food-contact surfaces, including stainless steel, polyvinyl chloride, polyester, low-density polyethylene, and rubber, with and without defects and organic matter. Biofilms on those surfaces were subjected to treatments of 200 ppm chlorine, 400 ppm quaternary ammonium compound (QAC), or 160 ppm peroxyacetic acid (PAA). Results showed that surface defects significantly (P < 0.05) increased the population of L. monocytogenes in biofilms on non-stainless steel surfaces and compromised the efficacies of sanitizers against L. monocytogenes biofilms across various surface types. A 5-min treatment of 200 ppm chlorine caused 1.84-3.39 log10 CFU/coupon reductions of L. monocytogenes on worn surfaces, compared to 2.79-3.93 log10 CFU/coupon reduction observed on new surfaces. Similarly, a 5-min treatment with 400 ppm QAC caused 2.05-2.88 log10 CFU/coupon reductions on worn surfaces, compared to 2.51-3.66 log10 CFU/coupon reductions on new surfaces. Interestingly, PAA sanitization (160 ppm, 1 min) exhibited less susceptibility to surface defects, leading to 3.41-4.35 log10 CFU/coupon reductions on worn surfaces, in contrast to 3.68-4.64 log10 CFU/coupon reductions on new surfaces. Furthermore, apple juice soiling diminished the efficacy of sanitizers against L. monocytogenes biofilms on worn surfaces (P < 0.05). These findings underscore the critical importance of diligent equipment maintenance and thorough cleaning processes to effectively eliminate L. monocytogenes contamination on food-contact surfaces.
Assuntos
Listeria monocytogenes , Árvores , Contaminação de Alimentos/prevenção & controle , Contaminação de Alimentos/análise , Frutas/química , Cloro , Contagem de Colônia Microbiana , Biofilmes , Ácido Peracético/farmacologia , Microbiologia de Alimentos , Aço Inoxidável/análiseRESUMO
High resistance to environmental factors as well as the ability to form biofilms allow Listeria monocytogenes to persist for a long time in difficult-to-reach places in food-producing plants. L. monocytogenes enters final products from contaminated surfaces in different areas of plants and poses a health risk to consumer. Modified surfaces are already used in the food industry to prevent cross-contamination. In this study, stainless-steel surfaces were coated with nanoscale silicon dioxide and the effects on attachment, bacterial growth and detachment of L. monocytogenes were evaluated. Attachment was considered for three different ways of application to simulate different scenarios of contamination. Bacterial growth of L. monocytogenes on the surface was recorded over a period of up to 8 h. Detachment was tested after cleaning inoculated stainless-steel surfaces with heated distilled water or detergent. Coating stainless-steel surfaces with nanoscale silica tends to reduce adherence and increased detachment and does not influence the bacterial growth of L. monocytogenes. Further modifications of the coating are necessary for a targeted use in the reduction of L. monocytogenes in food-processing plants.
Assuntos
Contaminação de Alimentos , Listeria monocytogenes , Contaminação de Alimentos/análise , Microbiologia de Alimentos , Aço Inoxidável/análise , Biofilmes , Aderência Bacteriana , Contagem de Colônia MicrobianaRESUMO
OBJECTIVES: Hexavalent chromium (Cr(VI)) is classified as a human carcinogen. Occupational Cr(VI) exposure can occur during different work processes, but the current exposure to Cr(VI) at Swedish workplaces is unknown. METHODS: This cross-sectional study (SafeChrom) recruited non-smoking men and women from 14 companies with potential Cr(VI) exposure (n = 113) and controls from 6 companies without Cr(VI) exposure (n = 72). Inhalable Cr(VI) was measured by personal air sampling (outside of respiratory protection) in exposed workers. Total Cr was measured in urine (pre- and post-shift, density-adjusted) and red blood cells (RBC) (reflecting Cr(VI)) in exposed workers and controls. The Bayesian tool Expostats was used to assess risk and evaluate occupational exposure limit (OEL) compliance. RESULTS: The exposed workers performed processing of metal products, steel production, welding, plating, and various chemical processes. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 µg/m3 (95% confidence interval: 0.11-0.21). Eight of the 113 exposed workers (7%) exceeded the Swedish OEL of 5 µg/m3, and the Bayesian analysis estimated the share of OEL exceedances up to 19.6% for stainless steel welders. Median post-shift urinary (0.60 µg/L, 5th-95th percentile 0.10-3.20) and RBC concentrations (0.73 µg/L, 0.51-2.33) of Cr were significantly higher in the exposed group compared with the controls (urinary 0.10 µg/L, 0.06-0.56 and RBC 0.53 µg/L, 0.42-0.72). Inhalable Cr(VI) correlated with urinary Cr (rS = 0.64) and RBC-Cr (rS = 0.53). Workers within steel production showed the highest concentrations of inhalable, urinary and RBC Cr. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urinary and RBC Cr concentrations compared with those with inferred acceptable ventilation. Furthermore, workers with inferred correct use of respiratory protection were exposed to significantly higher concentrations of Cr(VI) in air and had higher levels of Cr in urine and RBC than those assessed with incorrect or no use. Based on the Swedish job-exposure-matrix, approximately 17 900 workers were estimated to be occupationally exposed to Cr(VI) today. CONCLUSIONS: Our study demonstrates that some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). Employers and workers seem aware of Cr(VI) exposure, but more efficient exposure control strategies are required. National strategies aligned with the European strategies are needed in order to eliminate this cause of occupational cancer.
Assuntos
Poluentes Ocupacionais do Ar , Exposição Ocupacional , Masculino , Humanos , Feminino , Poluentes Ocupacionais do Ar/análise , Suécia , Estudos Transversais , Teorema de Bayes , Monitoramento Ambiental , Cromo/urina , Exposição Ocupacional/análise , Aço Inoxidável/análise , CarcinógenosRESUMO
Microbial multispecies communities consisting of background microbiota and Listeria monocytogenes could be established on materials used in food processing environments. The presence, abundance and diversity of the strains within these microbial multispecies communities may be affected by mutual interactions and differences in resistance towards regular cleaning and disinfection (C&D) procedures. Therefore, this study aimed to characterize the growth and diversity of a L. monocytogenes strain cocktail (n = 6) during biofilm formation on polyvinyl chloride (PVC) and stainless steel (SS) without and with the presence of a diverse set of background microbiota (n = 18). L. monocytogenes and background microbiota strains were isolated from mushroom processing environments and experiments were conducted in simulated mushroom processing environmental conditions using mushroom extract as growth medium and ambient temperature (20 °C) as culturing temperature. The L. monocytogenes strains applied during monospecies biofilm incubation formed biofilms on both PVC and SS coupons, and four cycles of C&D treatment were applied with a chlorinated alkaline cleaning agent and a disinfection agent based on peracetic acid and hydrogen peroxide. After each C&D treatment, the coupons were re-incubated for two days during an incubation period for 8 days in total, and C&D resulted in effective removal of biofilms from SS (reduction of 4.5 log CFU/cm2 or less, resulting in counts below detection limit of 1.5 log CFU/cm2 after every C&D treatment), while C&D treatments on biofilms formed on PVC resulted in limited reductions (reductions between 1.2 and 2.4 log CFU/cm2, which equals a reduction of 93.7 % and 99.6 %, respectively). Incubation of the L. monocytogenes strains with the microbiota during multispecies biofilm incubation led to the establishment of L. monocytogenes in the biofilm after 48 h incubation with corresponding high L. monocytogenes strain diversity in the multispecies biofilm on SS and PVC. C&D treatments removed L. monocytogenes from multispecies biofilm communities on SS (reduction of 3.5 log CFU/cm2 or less, resulting in counts below detection limit of 1.5 log CFU/cm2 after every C&D treatment), with varying dominance of microbiota species during different C&D cycles. However, C&D treatments of multispecies biofilm on PVC resulted in lower reductions of L. monocytogenes (between 0.2 and 2.4 log CFU/cm2) compared to single species biofilm, and subsequent regrowth of L. monocytogenes and stable dominance of Enterobacteriaceae and Pseudomonas. In addition, planktonic cultures of L. monocytogenes were deposited and desiccated on dry surfaces without and with the presence of planktonic background microbiota cultures. The observed decline of desiccated cell counts over time was faster on SS compared to PVC. However, the application of C&D resulted in counts below the detection limit of 1.7 log CFU/coupon on both surfaces (reduction of 5.9 log CFU/coupon or less). This study shows that L. monocytogenes is able to form single and multispecies biofilms on PVC with high strain diversity following C&D treatments. This highlights the need to apply more stringent C&D regime treatments for especially PVC and similar surfaces to efficiently remove biofilm cells from food processing surfaces.
Assuntos
Agaricales , Listeria monocytogenes , Microbiota , Desinfecção , Dessecação , Biofilmes , Aço Inoxidável/análise , Contagem de Colônia Microbiana , Microbiologia de AlimentosRESUMO
Welding fume is a common exposure in occupational settings. Gravimetric analysis for total particulate matter is common; however, the cost of laboratory analyses limits the availability of quantitative exposure assessment for welding fume metal constituents in occupational settings. We investigated whether a field portable X-ray fluorescence spectrometer (FP-XRF) could provide accurate estimates of personal exposures to metals common in welding fume (chromium, copper, manganese, nickel, vanadium, and zinc). The FP-XRF requires less training and is easier to deploy in many settings than traditional wet laboratory analyses. Filters were analyzed both by FP-XRF and inductively coupled plasma mass spectrometry (ICP-MS). We estimated the FP-XRF limit of detection for each metal and developed a correction factor accounting for the non-uniform deposition pattern on filter samples collected with an Institute of Medicine (IOM) inhalable particulate matter sampler. Strong linear correlation was observed for all metals (0.72Assuntos
Poluentes Ocupacionais do Ar
, Exposição Ocupacional
, Soldagem
, Exposição Ocupacional/análise
, Poluentes Ocupacionais do Ar/análise
, Aço Inoxidável/análise
, Cobre/análise
, Manganês/análise
, Níquel/análise
, Raios X
, Vanádio/análise
, Monitoramento Ambiental/métodos
, Cromo/análise
, Zinco/análise
, Espectrometria por Raios X/métodos
, Gases/análise
, Espectrometria de Massas/métodos
, Material Particulado/análise
RESUMO
Listeria monocytogenes can adapt, persist, and form biofilms on food premises surfaces, representing a challenge for food safety, since they led to disease transmission, food contamination and spoilage during production. Physical interventions (scrubbing and wiping) can help controlling formation, nevertheless when biofilms are formed, they are usually very resistant to current control strategies used in the food industry. Biofilm attachment and formation is influenced by environment characteristics, substrate properties and microbial motility. The purpose of this study was to evaluate the ability of L. monocytogenes to attach and form biofilms on different surfaces (wood, nylon, and polycarbonate) representative of the materials used during produce harvesting and storage. Multi-strain L. monocytogenes biofilms were grown in a CDC Biofilm reactor at 20 ± 2 °C up to 96-h and characterized for: a) attachment strength by enumerating cells after rinsing; b) hydrophobicity and interfacial tension by contact angle measurements; c) biofilm architecture by Laser Scanning Confocal Microscopy. All experiments were done in triplicate. Material, incubation, and solvent significantly affected the hydrophobicity and wetting properties of L. monocytogenes biofilms (P < 0.05). The type of material and incubation time significantly influenced hydrophobicity and wetting properties of L. monocytogenes biofilms (P < 0.05). Highest contact angle and lowest interfacial tension were observed on polycarbonate coupons. The data presented contributes to understanding Listeria biofilms grow on different surfaces commonly used in produce harvesting and storage. The data obtained in this study can be used when evaluating intervention strategies to control this pathogen in food premises.
Assuntos
Listeria monocytogenes , Estados Unidos , Microbiologia de Alimentos , Biofilmes , Contaminação de Alimentos/prevenção & controle , Contaminação de Alimentos/análise , Centers for Disease Control and Prevention, U.S. , Aço Inoxidável/análiseRESUMO
Enterococcus species are commensal organisms of the gastrointestinal tract and can also be isolated from traditional food products. They are used as probiotics in animals and less often in humans. This study aimed to investigate the antibacterial and anti-adhesive activities of twelve food-origin Enterococcus spp. biofilms on stainless steel AISI 316 L against foodborne pathogens, including Listeria monocytogenes CECT4032, Pseudomonas aeruginosa ATCC27853, and Escherichia coli ATCC25922. The antimicrobial and co-aggregation abilities of Enterococcus spp. were evaluated using spots-agar test and spectrophotometry aggregation assay, respectively. The anti-adhesive activity of selected strains on pathogenic bacteria was tested using serial dilution technique. Enterococci strains in planktonic mode showed strong inhibition activity against different pathogens tested with a significant difference in co-aggregation capacity. Moreover, L. monocytogenes and E. coli presented a low auto-aggregation rate compared to P. aeruginosa, which showed an amount of 11.25%. Scanning electron microscopy (SEM) revealed that biofilm biomass of Enterococcus spp. increased after 10 days. The thick layer of enterococci biofilms on AISI 316 L caused a low adhesion of L. monocytogenes, resulting in a reduction of approximately 2.8 log CFU/cm² for some selected strains. Additionally, Enterococcus monocultures' biofilms were more efficient than polymicrobial cultures (a cocktail of enterococci strains) in controlling pathogen adhesion. These results indicate that monocultures of Enterococcus spp. biofilms could be used to prevent the adhesion of pathogenic bacteria on AISI 316 L.
Assuntos
Anti-Infecciosos , Listeria monocytogenes , Humanos , Animais , Enterococcus , Escherichia coli , Contagem de Colônia Microbiana , Biofilmes , Microbiologia de Alimentos , Aço Inoxidável/análiseRESUMO
Plasma-Activated Water (PAW) was generated from tap water using a surface dielectric barrier discharge at different discharge power (26 and 36 W) and activation time (5 and 30 min). The inactivation of a three-strain Listeria monocytogenes cocktail in planktonic and biofilm state was evaluated. PAW generated at 36 W-30 min showed the lowest pH and the highest hydrogen peroxide, nitrates, nitrites contents and effectiveness against cells on planktonic state, resulting in 4.6 log reductions after a 15-min treatment. Although the antimicrobial activity in biofilms formed on stainless steel and on polystyrene was lower, increasing the exposure time to 30 min allowed an inactivation >4.5 log cycles. The mechanisms of action of PAW were investigated using chemical solutions that mimic its physico-chemical characteristics and also RNA-seq analysis. The main transcriptomic changes affected carbon metabolism, virulence and general stress response genes, with several overexpressed genes belonging to the cobalamin-dependent gene cluster.
Assuntos
Listeria monocytogenes , Listeria monocytogenes/fisiologia , Transcriptoma , Água/análise , Plâncton , Biofilmes , Aço Inoxidável/análise , Contagem de Colônia Microbiana , Microbiologia de AlimentosRESUMO
Dry sanitation is recommended to control contamination and prevent microbial growth and biofilm formation in the low-moisture food manufacturing plants. The objective of this study was to evaluate the effectiveness of dry sanitation protocols on Salmonella three-age biofilms formed on stainless steel (SS) and polypropylene (PP). Biofilms were formed for 24, 48 and 96 h at 37 °C using a cocktail of six Salmonella strains (Muenster, Miami, Glostrup, Javiana, Oranienburg, Yoruba) isolated from the peanut supply chain. Then, the surfaces were exposed to UV-C radiation, hot air (90 °C), 70% ethanol and a commercial product based on isopropyl alcohol for 5, 10, 15 and 30 min. After 30min exposure, on PP the reductions ranged from 3.2 to 4.2 log CFU/cm2 for UV-C, from 2.6 to 3.0 log CFU/cm2 for hot air, from 1.6 to 3.2 log CFU/cm2 for 70% ethanol and from 1.5 to 1.9 log CFU/cm2 for the commercial product. On SS, after the same exposure time, reductions of 1.3-2.2 log CFU/cm2, 2.2 to 3.3 log CFU/cm2, 1.7 to 2.0 log CFU/cm2 and 1.6 to 2.4 log CFU/cm2 were observed for UV-C, hot air, 70% ethanol and commercial product, respectively. UV-C was the only treatment affected by the surface material (p < 0.05) whereas the biofilm age influenced the effectiveness of UV-C and hot air (p < 0.05). For most treatment, there was significant difference among the exposure times (p < 0.05). Overall, the fastest loss in the biofilm viability was noted in the first 5 min, followed by a tail phase. The time predicted by the Weibull model for the first decimal reduction ranged from 0.04 to 9.9 min on PP and from 0.7 to 8.5 min on SS. In addition, the Weibull model indicates that most of treatments (79%) required a long-term exposure time (>30 min) to achieve 3-log reductions of Salmonella biofilms. In summary, UV-C showed the best performance on PP whereas hot air was noted to be the most effective on SS.
Assuntos
Biofilmes , Salmonella , Contagem de Colônia Microbiana , Etanol/farmacologia , 2-Propanol , Microbiologia de Alimentos , Aço Inoxidável/análiseRESUMO
Brettanomyces bruxellensis is the most damaging spoilage yeast in the wine industry because of its negative impact on the wine organoleptic qualities. The strain persistence in cellars over several years associated with recurrent wine contamination suggest specific properties to persist and survive in the environment through bioadhesion phenomena. In this work, the physico-chemical surface properties, morphology and ability to adhere to stainless steel were studied both on synthetic medium and on wine. More than 50 strains representative of the genetic diversity of the species were considered. Microscopy techniques made it possible to highlight a high morphological diversity of the cells with the presence of pseudohyphae forms for some genetic groups. Analysis of the physico-chemical properties of the cell surface reveals contrasting behaviors: most of the strains display a negative surface charge and hydrophilic behavior while the Beer 1 genetic group has a hydrophobic behavior. All strains showed bioadhesion abilities on stainless steel after only 3 h with differences in the concentration of bioadhered cells ranging from 2.2 × 102 cell/cm2 to 7.6 × 106 cell/cm2. Finally, our results show high variability of the bioadhesion properties, the first step in the biofilm formation, according to the genetic group with the most marked bioadhesion capacity for the beer group.
Assuntos
Brettanomyces , Vinho , Microbiologia de Alimentos , Aço Inoxidável/análise , Brettanomyces/metabolismo , Vinho/análise , Saccharomyces cerevisiaeRESUMO
The objectives of this study were, firstly, to compare a conventional (i.e., chlorinated alkaline) versus an alternative (chlorinated alkaline plus enzymatic) treatment effectivity for the elimination of biofilms from different L. monocytogenes strains (CECT 5672, CECT 935, S2-bac and EDG-e). Secondly, to evaluate the cross-contamination to chicken broth from non-treated and treated biofilms formed on stainless steel surfaces. Results showed that all L. monocytogenes strains were able to adhere and develop biofilms at approximately the same growth levels (≈5.82 log CFU/cm2). When non-treated biofilms were put into contact with the model food, obtained an average transference rate of potential global cross-contamination of 20.4%. Biofilms treated with the chlorinated alkaline detergent obtained transference rates similar to non-treated biofilms as a high number of residual cells (i.e., around 4 to 5 Log CFU/cm2) were present on the surface, except for EDG-e strain on which transference rate diminished to 0.45%, which was related to the protective matrix. Contrarily, the alternative treatment was shown to not produce cross-contamination to the chicken broth due to its high effectivity for biofilm control (<0.50% of transference) except for CECT 935 strain that had a different behavior. Therefore, changing to more intense cleaning treatments in the processing environments can reduce risk of cross-contamination.
Assuntos
Microbiologia de Alimentos , Listeria monocytogenes , Animais , Aço Inoxidável/análise , Detergentes , Galinhas , Biofilmes , Contagem de Colônia MicrobianaRESUMO
Pseudomonas spp. are widely distributed bacteria on surfaces in the food production and processing environment, where they form extracellular polymeric substance rich biofilms that interact with other bacteria. In this study, the influence of biofilm of Pseudomonas fragi ATCC 4973 on Listeria monocytogenes ATCC 19115 and Campylobacter jejuni NCTC 11168 was investigated at 5 °C and 15 °C on stainless steel in broth and food homogenates (fish or chicken meat). Stainless steel was then coated with PVDF-HFP/PVP/MoO3 nanocomposite and examined for surface changes (scanning electron microscope, static contact angle, Vickers hardness and elastic modulus). The effect of the prepared nanocomposite coating on P. fragi and on L. monocytogenes and C. jejuni was evaluated in mono- and co-culture. P. fragi produced more biofilm at 15 °C than at 5 °C, especially when food homogenates were used as growth media. Co-cultivation with pathogens did not affect biofilm production by P. fragi, but significant changes were observed in L. monocytogenes and C. jejuni, resulting in a decrease and increase, respectively, in the determined number of culturable biofilm cells. The first change was probably due to competition for the surface, and the second to the oxygen gradient. Stainless steel was then coated with a PVDF-HFP/PVP/MoO3 nanocomposite, which was characterised by lower roughness and higher wettability, but lower hardness compared to uncoated stainless steel. The prepared nanocoating showed bactericidal activity when tested in phosphate buffered saline. When used in food homogenates, a reduction of over 95 % in bacterial counts was observed. An abundant biofilm of P. fragi proved protective to L. monocytogenes and C. jejuni against the functionalised nanocomposite surface when tested in food homogenates. The control of spoilage Pseudomonas spp., which are common in the food production and processing environment, is important for reducing the contamination of food with spoilage bacteria and with pathogens such as L. monocytogenes and C. jejuni, which may be present in the same environment. The PVDF-HFP/PVP/MoO3 nanocomposite showed good potential for use as a coating for food contact surfaces, but possible migration of nanoparticles from the nanocomposite coating to food should be evaluated before its commercial use.
Assuntos
Campylobacter jejuni , Listeria monocytogenes , Pseudomonas fragi , Animais , Aço Inoxidável/análise , Temperatura , Matriz Extracelular de Substâncias Poliméricas/química , Biofilmes , Pseudomonas , Microbiologia de Alimentos , Aderência Bacteriana , Contagem de Colônia MicrobianaRESUMO
Biofilms are a significant concern in the food industry. The utilization of plant-derived compounds to inactivate biofilms on food contact surfaces has not been widely reported. Also, the increasing negative perception of consumers against synthetic sanitizers has encouraged the hunt for natural compounds as alternatives. Therefore, in this study we evaluated the antimicrobial activities of ethanol extracts, acetone extracts, and essential oils (EOs) of seven culinary herbs against Salmonella enterica serotype Typhimurium and Listeria innocua using the broth microdilution assay. Among all tested extracts and EOs, the ethanol extract of Piper betle L. exhibited the most efficient antimicrobial activities. To evaluate the biofilm inactivation effect, S. Typhimurium and L. innocua biofilms on pitted and smooth stainless steel (SS) coupons were exposed to P. betle ethanol extract (12.5 mg/ml), sodium hypochlorite (NaClO; 200 ppm), hydrogen peroxide (HP; 1100 ppm), and benzalkonium chloride (BKC; 400 ppm) for 15 min. Results showed that, for the untreated controls, higher sessile cell counts were observed on pitted SS versus smooth SS coupons. Overall, biofilm inactivation efficacies of the tested sanitizers followed the trend of P. betle extract ≥ BKC > NaClO > HP. The surface condition of SS did not affect the biofilm inactivation effect of each tested sanitizer. The contact angle results revealed P. betle ethanol extract could increase the surface wettability of SS coupons. This research suggests P. betle extract might be utilized as an alternative sanitizer in food processing facilities.
Assuntos
Anti-Infecciosos , Listeria monocytogenes , Piper betle , Aço Inoxidável/análise , Aço Inoxidável/farmacologia , Microbiologia de Alimentos , Biofilmes , Etanol/farmacologia , Salmonella typhimurium , Anti-Infecciosos/farmacologia , Contagem de Colônia MicrobianaRESUMO
Per- and polyfluoroalkyl substances (PFAS) are persistent environmental pollutants associated with negative health impacts. Assessments of tubing-related measurement bias for volatile PFAS are lacking, as gas-wall interactions with tubing can delay quantification of gas-phase analytes. We use online iodide chemical ionization mass spectrometry measurements to characterize tubing delays for three gas-phase oxygenated PFAS - 4:2 fluorotelomer alcohol (4:2 FTOH), perfluorobutanoic acid (PFBA), and hexafluoropropylene oxide dimer acid (HFPO-DA). Perfluoroalkoxy alkane and high-density polyethylene tubing yielded relatively short absorptive measurement delays, with no clear dependence on tubing temperature or sampled humidity. Sampling through stainless steel tubing led to prolonged measurement delays due to reversible adsorption of PFAS to the tubing surface, with strong dependence on tubing temperature and sample humidification. Silcosteel tubing afforded shorter measurement delays than stainless steel due to diminished surface adsorption of PFAS. Characterizing and mitigating these tubing delays is crucial for reliable quantification of airborne PFAS.Implications: Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants. Many PFAS are sufficiently volatile to exist as airborne pollutants. Measurements and quantification of airborne PFAS can be biased from material-dependent gas-wall interactions with sampling inlet tubing. Thus, characterizing these gas-wall interactions are crucial for reliably investigating emissions, environmental transport, and fates of airborne PFAS.
Assuntos
Poluentes Ambientais , Fluorocarbonos , Poluentes Químicos da Água , Aço Inoxidável/análise , Fluorocarbonos/análise , Fluorocarbonos/química , Poluentes Ambientais/análise , Alcanos/análise , Monitoramento Ambiental/métodos , Poluentes Químicos da Água/análiseRESUMO
BACKGROUND: Reveal® 3-D for Gluten is an immunochromatographic assay for the qualitative detection of gluten in environmental samples. The test uses monoclonal antibodies reactive to prolamins in wheat. OBJECTIVE: The objective of the study was to validate the Reveal 3-D test for detection of gluten in clean-in-place rinse and swabs from a stainless steel surface. METHODS: Elements of the study included food selectivity and interference testing, matrix testing, an assay robustness study, and reagent stability/lot-to-lot consistency testing. Wheat flour was used as the spiking material for all matrixes. RESULTS: In selectivity and interference testing, nine target matrixes all tested positive and 36 of 39 non-target matrixes tested negative. Almond flour, sesame flour, and cornstarch produced positive results as 100% commodities; reactivity can be eliminated with dilution or by testing without use of food extraction buffer, which is not a standard part of the environmental testing method. With a gluten spike at 9.3 mg/kg, chestnut flour, guar gum, and xanthan gum as 100% commodities inhibited the ability of the assay to detect gluten when tested without dilution. In quaternary ammonium clean-in-place rinse and swabs from stainless steel, 100% positive results were obtained at levels of 2.8 mg/kg and 4.7 µg/100 cm2, respectively. Results of independent laboratory testing of swabs from stainless steel supported those of internal trials. Robustness testing showed that introducing variations to three operating parameters simultaneously had no adverse effect on assay performance. In the reagent stability study, data supported kit expiration dating of 11 months. CONCLUSION: Results of the current study show that the Reveal test is an accurate and reliable method for qualitative detection of gluten in select clean-in-place rinse and environmental samples. HIGHLIGHTS: The Reveal test was able to detect gluten at levels of 2.8 ppm in clean-in-place rinse and 4.7 µg/100 cm2 in swabs from stainless steel.