An Immunomodulatory Peptide Dendrimer Inspired from Glatiramer Acetate.

Glatiramer acetate (GA) is a random polypeptide drug used to treat multiple sclerosis (MS), a chronic autoimmune disease. With the aim of identifying a precisely defined alternative to GA, we synthesized a library of peptide dendrimers with an amino acid composition similar to GA. We then challenged the dendrimers to trigger the release of the anti-inflammatory cytokine interleukin-1 receptor antagonist (IL-1Ra) from human monocytes, which is one of the effects of GA on immune cells. Several of the largest dendrimers tested were as active as GA. Detailed profiling of the best hit showed that this dendrimer induces the differentiation of monocytes towards an M2 (anti-inflammatory) state as GA does, however with a distinct immune marker profile. Our peptide dendrimer might serve as starting point to develop a well-defined immunomodulatory analog of GA.

Constructing a Biomaterial to Simulate Extracellular Drug Transport in Solid Tumors.

Designing an in vitro model of the tumor extracellular microenvironment to screen intratumoral drugs is an active challenge. As recent clinical successes of human intratumoral therapies stimulate research on intratumoral delivery, a need for a 3D tumor model to screen intratumoral therapies arises. When injecting the drug formulation directly into the tumor, the biophysics affecting intratumoral retention must be considered; especially for biologic therapies, which may be dominated by extracellular transport mechanisms. Fibrotic regions in solid tumors are typically rich in collagen I fibers. Using shear rheology, head and neck tumors with higher collagen density show a higher stiffness. Similarly, the stiffness of the hyaluronic acid (HA) hydrogel models is increased by adding collagen fibers to model the bulk biomechanical properties of solid tumors. HA hydrogels are then used as intratumoral injection site simulators to model in vitro the retention of glatiramer acetate (GA) and polyethylene glycol (PEG) administered intratumorally. Both compounds are also injected in murine tumors and retention is studied ex vivo for comparison. Retention of GA in the hydrogels is significantly longer than PEG, analogous to the solid tumors, suggesting the utility of HA hydrogels with collagen I fibers for screening extracellular drug transport after intratumoral administration.

Identity Profiling of Complex Mixtures of Peptide Products by Structural and Mass Mobility Orthogonal Analysis.

Identity is a critical quality attribute that must be determined before releasing batches of medicinal and dietary products. However, the identities of peptide-derived products composed of a large number of diverse molecules is challenging since most analytical techniques cannot analyze multiple molecules simultaneously. Here, we proposed the determination of the weight-average molecular weight (Mw) and polydispersity index (PDI) by mass spectrometry for control quality for the batch release of complex products, namely, glatiramer acetate (Copaxone), collagen hydrolysate (Colagenart), and a human dialyzable leucocyte extract (Transferon). The Mw and PDI values were orthogonally determined by PFG-STE-H2O(presaturation)-DOSY-NMR analysis. To the best of our knowledge, this is the first time that MS and NMR spectra have been combined to determine the PDI of complex products derived from protein hydrolysis that are not monodisperse. The performance of each method was evaluated by comparing the obtained results to those reported for glatiramer acetate using MALLS, the technique commonly employed to determine PDI. This combined approach demonstrates the ability of these techniques to separate peptide populations from complex mixtures to establish their identity through their mass distribution profiles.

Assessing the Similarity between Random Copolymer Drug Glatiramer Acetate by Using LC-MS Data Coupling with Hypothesis Testing.

The full characterization of nonbiological complex drugs (NBCDs) is not possible, but analytical approaches are of urgent need to evaluate the similarity between different lots and compare with their follow-up versions. Here, we propose a hypothesis testing-based approach to assess the similarity/difference between random amino acid copolymer drugs using liquid chromatography mass spectrometry (LC-MS) analysis. Two glatiramer acetate (GA) drugs, commercially available Copaxone and in-house synthesized SPT, and a negative control were digested by Lys-C and followed by HILIC-MS analysis. After retention time alignment and feature identification, 1627 features matched to m/z values in an elemental composition database were considered as derived from active drug ingredients. A hypothesis testing approach, the sum of squared deviations test, was developed to process high-dimensional data derived from LC-MS spectra. The feasibility of this approach was first demonstrated by testing 5 versus 5 lots of Copaxone and Copaxone versus SPT, which suggested a significant similarity by obtaining the estimated 95th percentile of the distribution of the estimator (ρ̂(95%)) at 0.0056 (p-value = 0.0026) and 0.0026 (p-value < 0.0001), respectively. In contrast, the ρ̂ was 0.036 (p-value = 1.00), while comparing Copaxone and the negative control, implying a lack of similarity. We further synthesized nine stable isotope-labeled peptides to validate the proposed amino acid sequences in the database, demonstrating the correctness in sequence identification. The quantitation variations in our analytical procedures were determined to be 6.8-7.7%. This approach was found to have a great potential for evaluating the similarity between generic NBCDs and listed reference drugs, as well as to monitor the lot-to-lot variation.

Glatiramer acetate persists at the injection site and draining lymph nodes via electrostatically-induced aggregation.

Glatiramer acetate (GA) is widely prescribed for the treatment of relapsing-remitting multiple sclerosis, however, the mechanism of action is still not fully understood. We investigated the structural properties of GA and examined alterations to the drug upon injection into the subcutaneous space. First, a variety of biophysical characterization techniques were employed to characterize GA in solution. GA was found to exist as alpha helices in solution with a hydrodynamic radius of ~3 nm in size. To simulate GA behavior at the site of injection, GA was injected into a solution of 1.5 MDa hyaluronic acid (HA). Visible aggregates were observed immediately upon injection and subsequent testing indicated aggregation was driven by electrostatic interactions between the positively-charged GA and negatively-charged HA. In vivo testing confirmed GA formed spherical particles in the nano- to micrometer size range, suggesting this mechanism contributes to persistence at the injection site and in draining lymph nodes. The aggregates were found to associate with glycosaminoglycans, suggesting an electrostatic mechanism of induced aggregation like the simulated injection. These novel observations may help explain the complex immunomodulatory mechanisms of GA and adverse injection site reactions seen in patients.

Compositional differences between Copaxone and Glatopa are reflected in altered immunomodulation ex vivo in a mouse model.

Copaxone (glatiramer acetate, GA), a structurally and compositionally complex polypeptide nonbiological drug, is an effective treatment for multiple sclerosis, with a well-established favorable safety profile. The short antigenic polypeptide sequences comprising therapeutically active epitopes in GA cannot be deciphered with state-of-the-art methods; and GA has no measurable pharmacokinetic profile and no validated pharmacodynamic markers. The study reported herein describes the use of orthogonal standard and high-resolution physicochemical and biological tests to characterize GA and a U.S. Food and Drug Administration-approved generic version of GA, Glatopa (USA-FoGA). While similarities were observed with low-resolution or destructive tests, differences between GA and USA-FoGA were measured with high-resolution methods applied to an intact mixture, including variations in surface charge and a unique, high-molecular-weight, hydrophobic polypeptide population observed only in some USA-FoGA lots. Consistent with published reports that modifications in physicochemical attributes alter immune-related processes, genome-wide expression profiles of ex vivo activated splenocytes from mice immunized with either GA or USA-FoGA showed that 7-11% of modulated genes were differentially expressed and enriched for immune-related pathways. Thus, differences between USA-FoGA and GA may include variations in antigenic epitopes that differentially activate immune responses. We propose that the assays reported herein should be considered during the regulatory assessment process for nonbiological complex drugs such as GA.

The random co-polymer glatiramer acetate rapidly kills primary human leukocytes through sialic-acid-dependent cell membrane damage.

The formulation glatiramer acetate (GA) is widely used in therapy of multiple sclerosis. GA consists of random copolymers of four amino acids, in ratios that produce a predominantly positive charge and an amphipathic character. With the extraordinary complexity of the drug, several pharmacological modes-of-action were suggested, but so far none, which rationalizes the cationicity and amphipathicity as part of the mode-of-action. Here, we report that GA rapidly kills primary human T lymphocytes and, less actively, monocytes. LL-37 is a cleavage product of human cathelicidin with important roles in innate immunity. It shares the positive charge and amphipathic character of GA, and, as shown here, also the ability to kill human leukocyte. The cytotoxicity of both compounds depends on sialic acid in the cell membrane. The killing was associated with the generation of CD45+ debris, derived from cell membrane deformation. Nanoparticle tracking analysis confirmed the formation of such debris, even at low GA concentrations. Electric cell-substrate impedance sensing measurements also recorded stable alterations in T lymphocytes following such treatment. LL-37 forms oligomers through weak hydrophobic contacts, which is critical for the lytic properties. In our study, SAXS showed that GA also forms this type of contacts. Taken together, our study offers new insight on the immunomodulatory mode-of-action of positively charged co-polymers. The comparison of LL-37 and GA highlights a consistent requirement of certain oligomeric and chemical properties to support cytotoxic effects of cationic polymers targeting human leukocytes.

Design of a strong cation exchange methodology for the evaluation of charge heterogeneity in glatiramer acetate.

Complex pharmaceuticals are in demand of competent analytical methods able to analyze charge heterogeneity as a critical quality attribute (CQA), in compliance with current regulatory expectations. A notorious example is glatiramer acetate (GA), a complex polypeptide mixture useful for the treatment of relapsing-remitting multiple sclerosis. This pharmaceutical challenges the current state of analytical technology in terms of the capacity to study their constituent species. Thus, a strong cation exchange methodology was designed under the lifecycle approach to support the establishment of GA identity, trough the evaluation of its chromatographic profile, which acts as a charge heterogeneity fingerprint. In this regard, a maximum relative margin of error of 5% for relative retention time and symmetry factor were proposed for the analytical target profile. The methodology met the proposed requirements after precision and specificity tests results, the former comprised of sensitivity and selectivity. Subsequently, method validation was conducted and showed that the method is able to differentiate between intact GA and heterogeneity profiles coming from stressed, fractioned or process-modified samples. In summary, these results provide evidence that the method is adequate to assess charge heterogeneity as a CQA of this complex pharmaceutical.

Functional effects of the antigen glatiramer acetate are complex and tightly associated with its composition.

Glatiramer acetate (Copaxone®; GA) is a non-biological complex drug for multiple sclerosis. GA modulated thousands of genes in genome-wide expression studies conducted in THP-1 cells and mouse splenocytes. Comparing GA with differently-manufactured glatiramoid Polimunol (Synthon) in mice yielded hundreds of differentially expressed probesets, including biologically-relevant genes (e.g. Il18, adj p<9e-6) and pathways. In human monocytes, 700+ probesets differed between Polimunol and GA, enriching for 130+ pathways including response to lipopolysaccharide (adj. p<0.006). Key differences were confirmed by qRT-PCR (splenocytes) or proteomics (THP-1). These studies demonstrate the complexity of GA's mechanisms of action, and may help inform therapeutic equivalence assessment.

Demonstration of equivalence of a generic glatiramer acetate (Glatopa™).

Glatiramer acetate (GA) has been available under the brand name Copaxone® for nearly two decades. Recently, the US Food and Drug Administration (FDA) approved the first generic GA, Glatopa™, as fully substitutable for all indications for which Copaxone 20mg is approved; Glatopa also represents the first FDA-approved "AP-rated," substitutable generic for treating patients with MS. Glatiramer acetate is a complex mixture of polypeptides and, consequently, its characterization presented challenges not generally encountered in drug development. Despite its complexity, and without requiring any clinical data, approval was accomplished through an Abbreviated New Drug Application in which equivalence to Copaxone was evaluated across four criteria: starting materials and basic chemistry; structural signatures for polymerization, depolymerization, and purification; physicochemical properties; and biological and immunological properties. This article describes the rigorous overall scientific approach used to successfully establish equivalence between Glatopa and Copaxone, and presents key representative data from several of the comprehensive sets of physicochemical (structural) and biological (functional) assays that were conducted.

Modern analytics for synthetically derived complex drug substances: NMR, AFFF-MALS, and MS tests for glatiramer acetate.

Glatiramer acetate (GA) is a mixture of synthetic copolymers consisting of four amino acids (glutamic acid, lysine, alanine, and tyrosine) with a labeled molecular weight range of 5000 to 9000 Da. GA is marketed as Copaxone™ by Teva for the treatment of multiple sclerosis. Here, the agency has evaluated the structure and composition of GA and a commercially available comparator, Copolymer-1. Modern analytical technologies which can characterize these complex mixtures are desirable for analysis of their comparability and structural "sameness." In the studies herein, a molecular fingerprinting approach is taken using mass-accurate mass spectrometry (MS) analysis, nuclear magnetic resonance (NMR) (1D-(1)H-NMR, 1D-(13)C-NMR, and 2D NMR), and asymmetric field flow fractionation (AFFF) coupled with multi-angle light scattering (MALS) for an in-depth characterization of three lots of the marketplace drug and a formulated sample of the comparator. Statistical analyses were applied to the MS and AFFF-MALS data to assess these methods' ability to detect analytical differences in the mixtures. The combination of multiple orthogonal measurements by liquid chromatography coupled with MS (LC-MS), AFFF-MALS, and NMR on the same sample set was found to be fit for the intended purpose of distinguishing analytical differences between these complex mixtures of peptide chains.

Development of Flow Imaging Analysis for Subvisible Particle Characterization in Glatiramer Acetate.

Proteins, peptides, colloids, and polymers present a rapidly growing field of pharmaceutical industry. Bringing these products into market, however, is a huge regulatory challenge, especially because many of these therapeutics are intended for parenteral administration. Physicochemical properties of such products--size, shape, surface potential, and extent of particle-particle interaction-have to be well understood and monitored throughout manufacturing, release, and stability testing. First and foremost, size distribution of subvisible particles (SVP) in these products should be reliably measured. We present development of a flow imaging method to assess SVP in the polypeptide injectable therapeutic product-glatiramer acetate (Copaxone(®)). Flow imaging comprises optical inspection of a flowing liquid and allows quantitation of particles in the range of 1-500 µm. The challenges of method development are discussed and the method performance characteristics--accuracy, precision, linearity, and specificity--are demonstrated.