Efficacy of vildagliptin on 10-year cardiovascular risk reduction in Thai patients with type 2 diabetes mellitus: A real-world observational study.

BACKGROUND AND AIMS: This study aimed to assess the effects of vildagliptin on the prevention of cardiovascular diseases in Thai patients with type 2 diabetes mellitus using the Thai Cardiovascular Risk Score. METHODS: All patients with type 2 diabetes mellitus who used vildagliptin at a secondary hospital in Thailand were screened and recruited. The relevant variables were obtained from patient medication charts at the first visit on which the patients were prescribed vildagliptin and from the 6-month, 12-month, and 18-month post-treatment visits. The Thai Cardiovascular Risk Score was calculated and monitored as a primary outcome, whereas changes in separate cardiometabolic parameters were assessed as secondary outcomes. RESULTS: Of the 321 patients screened, only 95 were recruited for the analysis. The average 10-year cardiovascular risks of patients increased from 19.65% at baseline to 20.74%, 20.69%, and 23.78% at 6, 12, and 18 months post treatment, respectively. However, a better trend of reduction in cardiovascular risk was observed in patients with a high baseline cardiovascular risk. The glucose-lowering effects of vildagliptin were significantly observed 12 months of treatment onwards, but non-significant changes were found in lipid and blood pressure levels as well as body mass index. CONCLUSION: Vildagliptin provided a promising glucose-lowering effect in Thai patients with type 2 diabetes mellitus. However, the mean 10-year cardiovascular risk did not significantly decrease. However, a negative correlation between cardiovascular risk reduction and baseline cardiovascular risk was observed in this study. Low sample size was a major limitation of this study.

Application of a simultaneous screening method for the detection of new psychoactive substances in various matrix samples using liquid chromatography/electrospray ionization tandem mass spectrometry and liquid chromatography/quadrupole time-of-flight mass spectrometry.

RATIONALE: Recently, new psychoactive substances (NPS) have emerged as a public health risk. Particularly, their chemical structures are modified to avoid detection. Synthetic NPS with effects similar to those of illegal drugs have been recently detected and synthesized worldwide, including MDMB-FUBINACA and APINAC, making it essential to rapidly and accurately detect NPS. METHODS: Fourteen NPS with similar structures were selected and their structures identified using 1 H and 13 C NMR spectroscopy. Additionally, we proposed the fragmentation pattern of each compound using liquid chromatography/quadrupole time-of-flight mass spectrometry (LC/QTOF-MS). A simultaneous analytical method using liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) was also developed and applied to real samples to detect the 14 NPS. The method was validated based on the specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, matrix effect, and stability according to international validation guidelines. RESULTS: The established method was used to screen 65 different matrix samples using LC/ESI-MS/MS. By comparing the calculated product ion ratios with those of standards, 2C-B in one of the real samples and 5F-MDMB-PICA in 20 samples were identified. For re-confirmation of detected compounds, the fragmentation pattern of each compound was compared with that of each standard using LC/QTOF-MS. CONCLUSIONS: In this study, LC/QTOF-MS data were used to elucidate the structures and fragmentation patterns of 14 NPS. A simultaneous method was developed using LC/ESI-MS/MS, which was applied to 65 real samples. The presented method and results can assist in ensuring the safety of public health from illegal adulteration.

Impact of comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry experimental design on data trilinearity and parallel factor analysis deconvolution.

Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC × GC-TOFMS) is a powerful instrument for the analysis of complex samples. Deconvolution of overlapped analytes using a suitable chemometric data analysis method such as Parallel Factor Analysis (PARAFAC) is often required. However, PARAFAC is designed to require a strict data trilinearity requirement. In this study we examine how strict this requirement is in the context of GC × GC experimental conditions, and demonstrate that under suitable conditions the data is sufficiently trilinear to achieve accurate deconvolution. The term trilinear deviation ratio (TDR) was previously introduced as a quantitative metric to predict the accuracy of PARAFAC deconvolution. Trilinear deviation ratio is defined as the run-to-run retention time shift, Δ2tR, for a given analyte on the second dimension (2D) separation, divided by the 2D analyte peak width-at-base, 2Wb. We demonstrate that experimental conditions impact the TDR range produced and PARAFAC performance. Column selection and modulation period, PM, are shown to significantly influence the TDR range. Two column sets were evaluated, giving rise to different k' ranges for the 2D separations. Each column set was used with an optimum PM as well as a longer PM to demonstrate the effect of PM selection on the TDR range and PARAFAC quantification. A PM of 6 s produced a Δ2tR range from -19.5 ms to -98 ms and TDRs from 0.157 to 0.439, translating into a PARAFAC bias from +1.6% to -13.5%. However, a PM of 1.5 s produced a Δ2tR range of -1.1 ms to -8.8 ms, and significantly lower TDRs from 0.013 to 0.057, translating into PARAFAC errors from +2.1% to -3.9%, with an average of -1.1% ± 1.4. These results validate the idea that a suitable GC × GC experimental design will provide accurate quantification with PARAFAC.

Novel univariate spectrophotometric determination of the recently released solid dosage form comprising dapagliflozin and saxagliptin via factorized response spectra: Assessment of the average content and dosage unit uniformity of tablets.

Dapagliflozin (DPF) and saxagliptin (SXG) are currently co-formulated in a tablet dosage form which is prescribed to improve glycemic control. The absorption spectra of DPF and SXG were highly overlapped which completely hindered their simultaneous estimation at their λmax 224 nm and 209 nm, respectively. Thus, in this work three smart and simple univariate spectrophotometric methods were originally established and validated for the first time in order to quantitatively estimate DPF and SXG in bulk forms and in combined pharmaceutical formulation without the requirement for any initial separation or treatment. These methods are; factorized zero order method (FZM), factorized derivative method (FDM) and factorized ratio difference method (FRM). These methods were capable of determining DPF and SXG over the range of 2.5-50.0 µg/mL and 2.5-60.0 µg/mL, respectively. All the developed methods are based on a novel and unique approach for the spectral recovery of unresolved spectra named; factorized response spectrum (FRS). The exclusivity of the FRS originates from its ability to completely resolve the cited drugs in the mixture and retrieve their original spectra. Selectivity of all proposed methods was assessed by comparing the obtained results of the mixture analysis with those of the pure powdered drugs. Validation of the newly developed methods was applied as recommended by the ICH demonstrating acceptable accuracy and precision. In general, these methods could be effectively employed for the routine quality control investigation of bulk materials and available market formulations.

Evaluation of the diagnostic ratios of adamantanes for identifying seriously weathered spilled oils from simulated experiment and actual oil spills.

The composition and physical properties of spilled oil have great changes during the seriously weathering process. It brings great difficulties to the source identification of oil spill. So the stable and trustworthy diagnostic ratios (DRs) for accurate identification of severely weathered spilled oils are very important. The explosion of Sinopec pipeline happened on November 22, 2013 at Qingdao, China. Local beaches at Jiaozhou Bay were polluted by spilled oils. We have collected original spilled oil samples from an area free from human interference near the oil leakage point after the accident. Synchronized with actual beach weathering, laboratory experiments were conducted to simulate oil weathering for 360 days by using the collected original spilled oil samples. Based on t test and the repeatability limit method, 50 diagnostic ratios (DRs) of adamantanes were screened. Four DRs, namely 1,3-dimethyladamantane/total dimethyladamantane, 1-methyladamantane/(1-methyladamantane + 1,3-dimethyladamantane), dialkyl diamantane/total diamantane, and diamantane/(diamantane + dialkyl diamantane), have maintained remarkable stability during the simulated weathering experiments and field weathering process. These stable ratios can retain the characteristics of oil source during weathering. They are very beneficial to improve the accuracy of identifying the source of severely weathered oil and can be used as an effective supplement to existing index system for source identification.

Novel Inhibitors of DNA Repair Enzyme TDP1 Combining Monoterpenoid and Adamantane Fragments.

BACKGROUND AND OBJECTIVE: The DNA repair enzyme tyrosyl-DNA-phosphodiesterase 1 (TDP1) is a current inhibition target to improve the efficacy of cancer chemotherapy. Previous studies showed that compounds combining adamantane and monoterpenoid fragments are active against TDP1 enzyme. This investigation is focused on the synthesis of monoterpenoid derived esters of 1-adamantane carboxylic acid as TDP1 inhibitors. METHODS: New esters were synthesized by the interaction between 1-adamantane carboxylic acid chloride and monoterpenoid alcohols. The esters were tested against TDP1 and its binding to the enzyme was modeling. RESULTS: 13 Novel ester-based TDP1 inhibitors were synthesized with yields of 21-94%; of these, nine esters had not been previously described. A number of the esters were found to inhibit TDP1, with IC50 values ranging from 0.86-4.08 µM. Molecular modelling against the TDP1 crystal structure showed a good fit of the active esters in the catalytic pocket, explaining their potency. A non-toxic dose of ester, containing a 3,7- dimethyloctanol fragment, was found to enhance the cytotoxic effect of topotecan, a clinically used anti-cancer drug, against the human lung adenocarcinoma cell line A549. CONCLUSION: The esters synthesized were found to be active against TDP1 in the lower micromolar concentration range, with these findings being corroborated by molecular modeling. Simultaneous action of the ester synthesized from 3,7-dimethyloctanol-1 and topotecan revealed a synergistic effect.

In-capillary derivatization with fluorescamine for the rapid determination of adamantane drugs by capillary electrophoresis with UV detection.

In-capillary derivatization using fluorescamine as the labeling reagent was proposed to enhance the detectability of adamantine drugs (memantine, amantadine and rimantadine) by spectrophotometric detection. Fluorescamine and the drugs were delivered to the capillary electrophoresis instrument at a ratio of 10:1 by zone injection. The derivatization reaction occurred following the application of voltage (20 kV). The derivatized products, hydrolyzed- fluorescamine and excess fluorescamine were separated in 7 min using 100 mM borate buffer (pH 10.0) containing 0.1% w/v of Brij®-35 and 20% v/v of acetonitrile. Validation data showed good linearity (r2  > 0.98), precision (%RSDs < 3.4), and accuracy (recoveries ranging from 98.0 to 102.0%). The detection and quantitation limits are in the range of 6.0-8.5 and 18-25 µM, respectively. The validation data is comparable to reported methods, however, the current method offers better precision with enhanced sensitivity (up to six times). Applications of the method show percent labeled amounts found in the studied samples within 100.6-109.3%, which complied with the United States Pharmacopeia limit (90.0-110.0%). The method was simple, rapid and, automated, which required no extra instrumentation or skillful operators.

Metabolism of the synthetic cannabinoids AMB-CHMICA and 5C-AKB48 in pooled human hepatocytes and rat hepatocytes analyzed by UHPLC-(IMS)-HR-MSE.

The main analytical targets of synthetic cannabinoids are often metabolites. With the high number of new psychoactive substances entering the market, suitable workflows are needed for analytical target identification in biological samples. The aims of this study were to identify the main metabolites of the synthetic cannabinoids, AMB-CHMICA and 5C-AKB48, using an in silico-assisted workflow with analytical data acquired using ultra-high-performance liquid chromatography-(ion mobility spectroscopy)-high resolution-mass spectrometry in data-independent acquisition mode (UHPLC-(IMS)-HR-MSE). The metabolites were identified after incubation with rat and pooled human hepatocytes using UHPLC-HR-MSE, followed by UHPLC-IMS-HR-MSE. Metabolites of AMB-CHMICA and 5C-AKB48 were predicted with Meteor (Lhasa Ltd) and imported to the UNIFI software (Waters). The predicted metabolites were assigned to analytical components supported by the UNIFI in silico fragmentation tool. The main metabolic pathway of AMB-CHMICA was O-demethylation and hydroxylation of the methylhexyl moiety. For 5C-AKB48, the main metabolic pathways were hydroxylation(s) of the adamantyl moiety and oxidative dechlorination with subsequent oxidation to the ω-COOH. The matrix components in the metabolite spectra were reduced with IMS, which improved the accuracy of the spectral interpretation; however, this left fewer fragment ions for assigning sites of metabolism. Meteor was able to predict the majority of the metabolites, with the most notable exception being the oxidative dechlorination and, consequently, all metabolites that underwent that transformation pathway. Oxidative dechlorination of ω-chloroalkanes in humans has not been previously reported in the literature. The postulated metabolites can be used for screening of biological samples, with four-dimensional identification based on retention time, collision cross section, precursor ion, and fragment ions.

Identification of Eight Synthetic Cannabinoids, Including 5F-AKB48 in Seized Herbal Products Using DART-TOF-MS and LC-QTOF-MS as Nontargeted Screening Methods.

Synthetic cannabinoids are sprayed onto plant material and smoked for their marijuana-like effects. Clandestine manufacturers modify synthetic cannabinoid structures by creating closely related analogs. Forensic laboratories are tasked with detection of these analog compounds, but targeted analytical methods are often thwarted by the structural modifications. Here, direct analysis in real time coupled to accurate mass time-of-flight mass spectrometry (DART-TOF-MS) in combination with liquid chromatography quadruple time-of-flight mass spectrometry (LC-QTOF-MS) are presented as a screening and nontargeted confirmation method, respectively. Methanol extracts of herbal material were run using both methods. Spectral data from four different herbal products were evaluated by comparing fragmentation pattern, accurate mass and retention time to available reference standards. JWH-018, JWH-019, AM2201, JWH-122, 5F-AKB48, AKB48-N-(4-pentenyl) analog, UR144, and XLR11 were identified in the products. Results demonstrate that DART-TOF-MS affords a useful approach for rapid screening of herbal products for the presence and identification of synthetic cannabinoids.

Simultaneous determination of amantadine, rimantadine, and memantine in processed products, chicken tissues, and eggs by liquid chromatography with tandem mass spectrometry.

A simultaneous determination of amantadine, rimantadine, and memantine in processed products (deep-fried chicken, fried chicken, fried quail egg, and grilled chicken) with liquid chromatography tandem mass spectrometry (LC-MS/MS) was developed. This new method was also applicable for chicken tissue (muscle, liver, and gizzard) and eggs. The chromatographic separation was performed on a Kinetex® XB-C18 core-shell technology column using a mobile phase of acetonitrile and 0.1% formic acid in a 10mmol/L ammonium formate solution, resulting in the complete separation of isomers (rimantadine and memantine) and any other obstructive peaks from the sample matrices. Sample preparation was performed by a modified QuEChERS method using acetonitrile and a 0.1% acetic acid extraction solution and cleaned using an Oasis® MCX cartridge. The sample matrix had no effect on the identification of the compounds. For quantification, an external solvent calibration curve was used. This new method exhibited good accuracy ranging from 79.9% to 91.5%. The relative standard deviation of repeatability (RSDr) ranged from 1.2% to 3.6% and the relative standard deviation of within-laboratory reproducibility (RSDWR) ranged from 1.3% to 6.0%. These standard deviations satisfied the criteria for Japanese validation guidelines. The limit of quantification (LOQ) was 1.0µg/kg for all samples. Analyte residues were not detected in 55 samples using the validated method.

Brompheniramine as a novel probe for indirect UV detection and its application for the capillary electrophoresis of adamantane drugs.

Brompheniramine, an antihistamine drug, was employed as a novel UV probe for capillary electrophoresis with indirect UV detection of adamantane drugs (memantine, amantadine, and rimantadine). The probe possesses high molar absorptivity of 24 × 103 L/mol cm at 6 mM, which enables the measurement of these nonchromophore analytes without derivatization. The simple background electrolyte (10 mM sodium dihydrogen phosphate (pH 5.0) containing 5 mM brompheniramine and 6 mM ß-cyclodextrin) provided the separation of the analytes in a short time (7.5 min). Under these conditions, brompheniramine had similar mobility to that of the analyte ions resulting in symmetric peaks with minimal electrodispersion. The analytes displace the probe at a one-to-one ratio with transfer values close to unity. ß-Cyclodextrin played a role in the resolution of the structurally similar adamantane derivatives. Method validation showed good linearity (r2  > 0.98), precision (%RSD ≤ 3.30), and accuracy (recoveries ranging from 98 to 109%). The proposed method was successfully applied to determine the adamantane content in pharmaceutical products.

Identification of three cannabimimetic indazole and pyrazole derivatives, APINACA 2H-indazole analogue, AMPPPCA, and 5F-AMPPPCA.

This paper reports analytical properties of three cannabimimetic indazole and pyrazole derivatives seized from a clandestine laboratory. These three new synthetic cannabinoids include N-(1-adamantyl)-2-pentyl-2H-indazole-3-carboxamide (APINACA 2H-indazole analogue, 1), N-(1-adamantyl)-4-methyl-1-pentyl-5-phenyl-1H-pyrazole-3-carboxamide (AMPPPCA, 2), and N-(1-adamantyl)-1-(5-fluoropentyl)-4-methyl-5-phenyl-1H-pyrazole-3-carboxamide (5F-AMPPPCA, 3). These compounds were identified by liquid chromatography-quadrupole time-of-flight-mass spectrometry (LC-QTOF-MS), gas chromatography-time-of-flight-mass spectrometry (GC-TOF-MS), and nuclear magnetic resonance (NMR) spectroscopy. No analytical properties and pharmacological activities about compounds 1-3 have appeared until now, making this the first report on these compounds. Copyright © 2016 John Wiley & Sons, Ltd.

Quantification of synthetic cannabinoids in herbal smoking blends using NMR.

Herbal smoking blends containing synthetic cannabinoids have become popular alternatives to marijuana. These products were previously sold in pre-packaged foil bags, but nowadays seizures usually contain synthetic cannabinoid powders together with unprepared plant materials. A question often raised by the Swedish police is how much smoking blend can be prepared from certain amounts of banned substance, in order to establish the severity of the crime. To address this question, information about the synthetic cannabinoid content in both the powder and the prepared herbal blends is necessary. In this work, an extraction procedure compatible with direct NMR quantification of synthetic cannabinoids in herbal smoking blends was developed. Extraction media, time and efficiency were tested for different carrier materials containing representative synthetic cannabinoids. The developed protocol utilizes a 30 min extraction step in d4 -methanol in presence of internal standard allowing direct quantitation of the extract using NMR. The accuracy of the developed method was tested using in-house prepared herbal smoking blends. The results showed deviations less than 0.2% from the actual content, proving that the method is sufficiently accurate for these quantifications. Using this method, ten synthetic cannabinoids present in sixty-three different herbal blends seized by the Swedish police between October 2012 and April 2015 were quantified. Obtained results showed a variation in cannabinoid contents from 1.5% (w/w) for mixtures containing MDMB-CHMICA to over 5% (w/w) for mixtures containing 5F-AKB-48. This is important information for forensic experts when making theoretical calculations of production quantities in legal cases regarding "home-made" herbal smoking blends. Copyright © 2016 John Wiley & Sons, Ltd.

Antibacterial sulfur-containing platensimycin and platencin congeners from Streptomyces platensis SB12029.

The platensimycin (PTM) and platencin (PTN) class of natural products are promising drug leads that target bacterial and mammalian fatty acid synthases. Natural congeners and synthetic analogues of PTM and PTN have been instrumental in determining their structure-activity relationships, with only a few analogues retaining the potencies of PTM and PTN. Here we describe the identification and isolation of two new sulfur-containing PTM congeners (3 and 5) from the engineered dual PTM-PTN overproducing Streptomyces platensis SB12029. Structure elucidation of platensimycin D1 (5), a sulfur-containing PTM pseudo-dimer, revealed the existence of its presumptive thioacid precursor (3). The unstable thioacid 3 was isolated and confirmed by structural characterization of its permethylated product (6). LC-MS analysis of crude extracts of SB12029 confirmed the presence of the thioacid analogue of PTN (4). The minimum inhibitory concentration (MIC) was determined for 5 revealing retention of the strong antibacterial activity of PTM.

Identification, isolation and characterization of potential process-related impurity and its degradation product in vildagliptin.

Vildagliptin is a member of a new class of oral anti-diabetic drug. One unknown impurity was identified in the range of 0.01-0.06% in different laboratory batches of vildagliptin along with known impurities by HPLC analysis. The structure of unknown impurity was proposed as (2S)-1-[2-[(3-hydroxyadamantan-1-yl)imino]acetyl]pyrrolidine-2-carbonitrile (Impurity-E) using LC/ESI-MS(n) study. The unknown impurity was found to be unstable in diluent (H2O:CH3CN) and degrading into another stable impurity. The degraded stable impurity was isolated from enriched reaction crude sample by semi preparative liquid chromatography. The structure of stable impurity was established using FT-IR, NMR ((1)H, (13)C and DEPT), 2D NMR (HSQC, HMBC and COSY) and mass spectral data as (8aS)-3-hydroxy-octahydropyrrolo[1,2-a]piperazine-1,4-dione (Impurity-F). Impurity identification, abnormal behaviour of impurity-E, isolation of impurity-F, fragmentation mechanism and structural elucidation were also discussed.

Tissue biomarkers of drug efficacy: case studies using a MALDI-MSI workflow.

MALDI MS imaging (MALDI-MSI) offers a capability to not only evaluate the distribution, localization and metabolism of drugs within tissues but also allow correlative tissue measurement of the effect of the drug on biomolecules in the targeted pathway. Particularly for MALDI-MSI, lipid molecules are readily detectable within tissues. Case study examples are provided for two different drugs targeting the sphingosine-1-phosphate/ceramide nexus in tumor xenograft tissues. A workflow combining high-resolution MALDI-MSI with on-tissue confirmation of targeted compounds using a structural library and on-tissue enzymatic digestion strategy is described. Representative images of drug metabolite distribution that correlate to an increase or decrease in sphingosine-1-phosphate or ceramide species are provided.

High Affinity Host-Guest FRET Pair for Single-Vesicle Content-Mixing Assay: Observation of Flickering Fusion Events.

Fluorescence-based single-vesicle fusion assays provide a powerful method for studying mechanisms underlying complex biological processes of SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor)-mediated vesicle fusion and neurotransmitter release. A crucial element of these assays is the ability of the fluorescent probe(s) to reliably detect key intermediate events of fusion pore opening and content release/mixing. Here, we report a new, reliable, and efficient single-vesicle content-mixing assay using a high affinity, fluorophore tagged host-guest pair, cucurbit[7]uril-Cy3 and adamantane-Cy5 as a fluorescence resonance energy transfer (FRET) pair. The power of these probes is demonstrated by the first successful observation of flickering dynamics of the fusion pore by in vitro assay using neuronal SNARE-reconstituted vesicles.

Use of the distributions of adamantane acids to profile short-term temporal and pond-scale spatial variations in the composition of oil sands process-affected waters.

Oil industry produced waters, such as the oils sands process-affected waters (OSPW) of Alberta, Canada, represent a challenge in terms of risk assessment and reclamation due to their extreme complexity, particularly of the organic chemical constituents, including the naphthenic acids (NA). The identification of numerous NA in single samples has raised promise for the use of NA distributions for profiling OSPW. However, monitoring of the success of containment is still difficult, due to the lack of knowledge of the homogeneity (or otherwise) of OSPW composition within, and between, different industry containments. Here we used GC×GC-MS to compare the NA of five OSPW samples from each of two different industries. Short-term temporal and pond-scale spatial variations in the distributions of known adamantane acids and diacids and other unknown tricyclic acids were examined and a statistical appraisal of the replicate data made. The presence/absence of individual acids easily distinguished the OSPW NA of one industry from those of the other. The proportions of tricyclic acids with different carbon numbers also varied significantly between the OSPW of the two industries. The pond-scale spatial variation in NA in OSPW samples was higher than the short-term (2 weeks) temporal variations. An OSPW sample from an aged pond was exceptionally high in the proportion of C15,16,17 compounds, possibly due to increased biotransformation. Such techniques could possibly also help to distinguish different sources of NA in the environment.

Compatible validated spectrofluorimetric and spectrophotometric methods for determination of vildagliptin and saxagliptin by factorial design experiments.

Simple, selective and reproducible spectrofluorimetric and spectrophotometric methods have been developed for the determination of vildagliptin and saxagliptin in bulk and their pharmaceutical dosage forms. The first proposed spectrofluorimetric method is based on the dansylation reaction of the amino group of vildagliptin with dansyl chloride to form a highly fluorescent product. The formed product was measured spectrofluorimetrically at 455 nm after excitation at 345 nm. Beer's law was obeyed in a concentration range of 100-600 µg ml(-1). The second proposed spectrophotometric method is based on the charge transfer complex of saxagliptin with tetrachloro-1,4-benzoquinone (p-chloranil). The formed charge transfer complex was measured spectrophotometrically at 530 nm. Beer's law was obeyed in a concentration range of 100-850 µg ml(-1). The third proposed spectrophotometric method is based on the condensation reaction of the primary amino group of saxagliptin with formaldehyde and acetyl acetone to form a yellow colored product known as Hantzsch reaction, measured at 342.5 nm. Beer's law was obeyed in a concentration range of 50-300 µg ml(-1). All the variables were studied to optimize the reactions' conditions using factorial design. The developed methods were validated and proved to be specific and accurate for quality control of vildagliptin and saxagliptin in their pharmaceutical dosage forms.