Exploring toilet plume bioaerosol exposure dynamics in public toilets using a Design of Experiments approach.

Bioaerosols generated during toilet flushing can contribute to the spread of airborne pathogens and cross-contamination in indoor environments. This presents an increased risk of fomite-mediated or aerosol disease transmission. This study systematically investigated the factors contributing to increased bioaerosol exposure following toilet flushing and developed an empirical model for predicting the exposure-relevant bioaerosol concentration. Air in a toilet cubicle was sampled by impaction after seeding with Clostridium difficile spores. Design of Experiments (DoE) main effects screening and full factorial design approaches were then employed to investigate the significant factors that heighten the risk of exposure to bioaerosols post-flush. Our findings reveal that the inoculated bacterial concentration (C), time elapsed after flushing (t), lateral distance (d), and mechanical ventilation (v) are significant predictors of bioaerosol concentration, with p-values < 0.05. The interaction term, C × d showed a marked increase in bioaerosol concentration up to 232 CFU/m3 at the closest proximity and highest pathogen load. The interplay of C and t (C × t) demonstrated a time-dependent attenuation of bioaerosol viability, with concentrations peaking at 241 CFU/m3 immediately post-flush and notably diminishing over time. The lateral distance and time post-flush (d × t) interaction also revealed a gradual decrease in bioaerosol concentration, highlighting the effectiveness of spatial and temporal dilution in mitigating bioaerosol exposure risks. Furthermore, there is an immediate rise in relative humidity levels post-flush, impacting the air quality in the toilet environment. This study not only advances our understanding of exposure pathways in determining bioaerosol exposure, but also offers pivotal insights for designing targeted interventions to reduce bioaerosol exposure. Recommendations include designing public toilets with antimicrobial surfaces, optimizing ventilation, and initiating timely disinfection protocols to prioritise surfaces closest to the toilet bowl during peak exposure periods, thereby promoting healthier indoor environments and safeguarding public health in high-traffic toilet settings.

Photochemical evolution of the molecular composition of dissolved organic carbon and dissolved brown carbon from wood smoldering.

Recently, extreme wildfires occur frequently around the world and emit substantial brown carbon (BrC) into the atmosphere, whereas the molecular compositions and photochemical evolution of BrC remain poorly understood. In this work, primary smoke aerosols were generated from wood smoldering, and secondary smoke aerosols were formed by the OH radical photooxidation in an oxidation flow reactor, where both primary and secondary smoke samples were collected on filters. After solvent extraction of filter samples, the molecular composition of dissolved organic carbon (DOC) was determined by Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS). The molecular composition of dissolved BrC was obtained based on the constraints of DOC formulae. The proportion of dissolved BrC fractions accounted for approximately 1/3-1/2 molecular formulae of DOC. The molecular characteristics of dissolved BrC showed higher levels of carbon oxidation state, double bond equivalents, and modified aromaticity index than those of DOC, indicating that dissolved BrC fractions were a class of organic structures with relatively higher oxidation state, unsaturated and aromatic degree in DOC fractions. The comparative analysis suggested that aliphatic and olefinic structures dominated DOC fractions (contributing to 70.1%-76.9%), while olefinic, aromatic, and condensed aromatic structures dominated dissolved BrC fractions (contributing to 97.5%-99.9%). It is worth noting that dissolved BrC fractions only contained carboxylic-rich alicyclic molecules (CRAMs)-like structures, unsaturated hydrocarbons, aromatic structures, and highly oxygenated compounds. CRAMs-like structures were the most abundant species in both DOC and dissolved BrC fractions. Nevertheless, the specific molecular characteristics for DOC and dissolved BrC fractions varied with subgroups after aging. The results highlight the similarities and differences in the molecular compositions and characteristics of DOC and dissolved BrC fractions with aging. This work will provide insights into understanding the molecular composition of DOC and dissolved BrC in smoke.

A quanta-independent approach for the assessment of strategies to reduce the risk of airborne infection.

The Wells-Riley model is extensively used for retrospective and prospective modelling of the risk of airborne transmission of infection in indoor spaces. It is also used when examining the efficacy of various removal and deactivation methods for airborne infectious aerosols in the indoor environment, which is crucial when selecting the most effective infection control technologies. The problem is that the large variation in viral load between individuals makes the Wells-Riley model output very sensitive to the input parameters and may yield a flawed prediction of risk. The absolute infection risk estimated with this model can range from nearly 0 % to 100 % depending on the viral load, even when all other factors, such as removal mechanisms and room geometry, remain unchanged. We therefore propose a novel method that removes this sensitivity to viral load. We define a quanta-independent maximum absolute before-after difference in infection risk that is independent of quanta factors like viral load, physical activity, or the dose-response relationships. The input data needed for a non-steady-state calculation are just the removal rates, room volume, and occupancy duration. Under steady-state conditions the approach provides an elegant solution that is only dependent on removal mechanisms before and after applying infection control measures. We applied this method to compare the impact of relative humidity, ventilation rate and its effectiveness, filtering efficiency, and the use of ultraviolet germicidal irradiation on the infection risk. The results demonstrate that the method provides a comprehensive understanding of the impact of infection control strategies on the risk of airborne infection, enabling rational decisions to be made regarding the most effective strategies in a specific context. The proposed method thus provides a practical tool for mitigation of airborne infection risk.

Aerosol influence on cloud macrophysical and microphysical properties over the Tibetan Plateau and its adjacent regions.

This study uses aerosol optical depth (AOD) and cloud properties data to investigate the influence of aerosol on the cloud properties over the Tibetan Plateau and its adjacent regions. The study regions are divided as the western part of the Tibetan Plateau (WTP), the Indo-Gangetic Plain (IGP), and the Sichuan Basin (SCB). All three regions show significant cloud effects under low aerosol loading conditions. In WTP, under low aerosol loading conditions, the effective radius of liquid cloud particles (LREF) decreases with the increase of aerosol loading, while the effective radius of ice cloud particles (IREF) and cloud top height (CTH) increase during the cold season. Increased aerosol loading might inhibit the development of warm rain processes, transporting more cloud droplets above the freezing level and promoting ice cloud development. During the warm season, under low aerosol loading conditions, both the cloud microphysical (LREF and IREF) and macrophysical (cloud top height and cloud fraction) properties increase with the increase of aerosol loading, likely due to higher dust aerosol concentration in this region. In IGP, both LREF and IREF increase with the increase in aerosol loading during the cold season. In SCB, LREF increases with the increase in aerosol loading, while IREF decreases, possibly due to the higher hygroscopic aerosol concentration in the SCB during the cold season. Meteorological conditions also modulate the aerosol-cloud interaction. Under different convective available potential energy (CAPE) and relative humidity (RH) conditions, the influence of aerosol on clouds varies in the three regions. Under low CAPE and RH conditions, the relationship between LREF and aerosol in both the cold and warm seasons is opposite in the WTP: LREF decreases with the increase of aerosol in the cold season, while it increases in the warm season. This discrepancy may be attributed to a difference in the moisture condition between the cold and warm seasons in this region. In general, the influence of aerosols on cloud properties in TP and its adjacent regions is characterized by significant nonlinearity and spatial variability, which is likely related to the differences in aerosol types and meteorological conditions between different regions.

Submicron aerosol pollution in Greater Cairo (Egypt): A new type of urban haze?

Greater Cairo, the largest megacity of the Middle East North Africa (MENA) region, is currently suffering from major aerosol pollution, posing a significant threat to public health. However, the main sources of pollution remain insufficiently characterized due to limited atmospheric observations. To bridge this knowledge gap, we conducted a continuous 2-month field study during the winter of 2019-2020 at an urban background site, documenting for the first time the chemical and physical properties of submicron (PM1) aerosols. Crustal material from both desert dust and road traffic dust resuspension contributed as much as 24 % of the total PM1 mass (rising to 66 % during desert dust events), a figure not commonly observed in urban environments. Our observations showed significant decreases in black carbon concentrations and ammonium sulfate compared to data from 15 years ago, indicating an important reduction in both local and regional emissions as a result of effective mitigation measures. The diurnal variability of carbonaceous aerosols was attributed to emissions emanating from local traffic at rush hours and nighttime open biomass burning. Surprisingly, semi-volatile ammonium chloride (NH4Cl) originating from local open biomass and waste burning was found to be the main chemical species in PM1 over Cairo. Its nighttime formation contributed to aerosol water uptake during morning hours, thereby playing a major role in the build-up of urban haze. While our results confirm the persistence of a significant dust reservoir over Cairo, they also unveil an additional source of highly hygroscopic (semi-volatile) inorganic salts, leading to a unique type of urban haze. This haze, with dominant contributors present in both submicron (primarily as NH4Cl) and supermicron (largely as dust) modes, underscores the potential implications of heterogeneous chemical transformation of air pollutants in urban environments.

Retrieval of high-resolution aerosol optical depth (AOD) using Landsat 8 imageries over different LULC classes over a city along Indo-Gangetic Plain, India.

Aerosol optical depth (AOD) serves as a crucial indicator for assessing regional air quality. To address regional and urban pollution issues, there is a requirement for high-resolution AOD products, as the existing data is of very coarse resolution. To address this issue, we retrieved high-resolution AOD over Kanpur (26.4499°N, 80.3319°E), located in the Indo-Gangetic Plain (IGP) region using Landsat 8 imageries and implemented the algorithm SEMARA, which combines SARA (Simplified Aerosol Retrieval Algorithm) and SREM (Simplified and Robust Surface Reflectance Estimation). Our approach leveraged the green band of the Landsat 8, resulting in an impressive spatial resolution of 30 m of AOD and rigorously validated with available AERONET observations. The retrieved AOD is in good agreement with high correlation coefficients (r) of 0.997, a low root mean squared error of 0.035, and root mean bias of - 4.91%. We evaluated the retrieved AOD with downscaled MODIS (MCD19A2) AOD products across various land classes for cropped and harvested period of agriculture cycle over the study region. It is noticed that over the built-up region of Kanpur, the SEMARA algorithm exhibits a stronger correlation with the MODIS AOD product compared to vegetation, barren areas and water bodies. The SEMARA approach proved to be more effective for AOD retrieval over the barren and built-up land categories for harvested period compared with the cropping period. This study offers a first comparative examination of SEMARA-retrieved high-resolution AOD and MODIS AOD product over a station of IGP.

Size-resolved aerosol at a Coastal Great Lakes Site: Impacts of new particle formation and lake spray.

The quantification of aerosol size distributions is crucial for understanding the climate and health impacts of aerosols, validating models, and identifying aerosol sources. This work provides one of the first continuous measurements of aerosol size distribution from 1.02 to 8671 nm near the shore of Lake Michigan. The data were collected during the Lake Michigan Ozone Study (LMOS 2017), a comprehensive air quality measurement campaign in May and June 2017. The time-resolved (2-min) size distribution are reported herein alongside meteorology, remotely sensed data, gravimetric filters, and gas-phase variables. Mean concentrations of key aerosol parameters include PM2.5 (6.4 µg m-3), number from 1 to 3 nm (1.80x104 cm-3) and number greater than 3 nm (8x103 cm-3). During the field campaign, approximately half of days showed daytime ultrafine burst events, characterized by particle growth from sub 10 nm to 25-100 nm. A specific investigation of ultrafine lake spray aerosol was conducted due to enhanced ultrafine particles in onshore flows coupled with sustained wave breaking conditions during the campaign. Upon closer examination, the relationships between the size distribution, wind direction, wind speed, and wave height did not qualitatively support ultrafine particle production from lake spray aerosol; statistical analysis of particle number and wind speed also failed to show a relationship. The alternative hypothesis of enhanced ultrafine particles in onshore flow originating mainly from new particle formation activity is supported by multiple lines of evidence.

Australian Black summer smoke signal on Antarctic aerosol collected between New Zealand and the Ross sea.

Open biomass burning (BB) events are a well-known primary aerosol source, resulting in the emission of significant amount of gaseous and particulate matter and affecting Earth's radiation budget. The 2019-2020 summer, known as "Australian Black Summer", showed exceptional duration and intensity of seasonal wildfires, triggered by high temperatures and severe droughts. Since increasing megafires are predicted due to expected climate changes, it is critical to study the impact of BB aerosol on a large scale and evaluate related transport processes. In this study, five aerosol samples (total suspended particles with a diameter >1 µm) were collected during the XXXV Italian Expedition in Antarctica on board of the R/V Laura Bassi from 6th of January to February 16, 2020, along the sailing route from Lyttelton harbor (New Zealand) to Terra Nova Bay (Antarctica). Levoglucosan and its isomers have been analyzed as markers of BB, together with polycyclic aromatic hydrocarbons (PAHs), sucrose and alcohol sugars. Ionic species and carboxylic acids have been analyzed to support the identification of aerosol sources and its aging. Results showed high levoglucosan concentrations (325-1266 pg m-3) during the campaign, suggesting the widespread presence of smoke in the region, because of huge wildfire releases. Backward trajectories indicated the presence of long-range atmospheric transport from South America, probably carrying wildfires plume, in agreement with literature. Regional sources have been suggested for PAHs, particularly for 3-4 rings' compounds; monosaccharides, sucrose, arabitol, and mannitol were related to marine and biogenic contributions. In a warming climate scenario, more frequent and extensive wildfire episodes are expected in Australia, potentially altering albedo, aerosol radiative properties, and cloud interactions. Therefore, it is crucial to strengthens the investigations on the regional climatic effects of these events in Antarctica.

Evaluation of pathogen spread risk from excavated landfill.

Landfill is a huge pathogen reservoir and needs special attention. Herein, the distribution and spread risk of pathogen were assessed in excavated landfill scenario. The results show that landfill excavation will greatly increase the risk of environmental microbial contamination. The highest total concentration of culturable bacteria among landfill refuse, topsoil and plant leaves was found to be as high as 1010 CFU g-1. Total coliforms, Hemolytic bacteria, Staphylococcus aureus, Salmonella, Enterococci, and Fecal coliforms were detected in the landfill surrounding environment. Notably, pathogens were more likely to adhere to plant leaves, making it an important source of secondary pathogens. The culturable bacteria concentration in the air samples differed with the landfill zone with different operation status, and the highest culturable bacteria concentration was found in the excavated area of the landfill (3.3 × 104 CFU m-3), which was the main source of bioaerosol release. The distribution of bioaerosols in the downwind outside of the landfill showed a tendency of increasing and then decreasing, and the highest concentration of bioaerosols outside of the landfill (6.56 × 104 CFU m-3) was significantly higher than that in the excavated area of the landfill. The risk of respiratory inhalation was the main pathway leading to infection, whereas the HQin (population inhalation hazardous quotient) at 500 m downwind the excavation landfill was still higher than 1, indicating that the neighboring residents were exposed to airborne microbial pollutants. The results of the study provide evidence for bioaerosols control protective measures taken to reduce health risk from the excavated landfill.

Unveiling the airborne microbial menace: Novel insights into pathogenic bacteria and fungi in bioaerosols from nursery schools to universities.

Bacterial and fungal aerosol pollution is widespread in indoor school environments, and poses potential health risks to students and staff. Understanding the distribution and diversity of microbial communities within aerosols is crucial to mitigate their adverse effects. Existing knowledge regarding the composition of bacterial and fungal aerosols, particularly the presence of potential pathogenic microorganisms in fine particulate matter (PM2.5) from nursery schools to universities, is limited. To bridge this knowledge gap, in the present study, we collected PM2.5 samples from five types of schools (i.e., nursery schools, primary schools, junior schools, and high schools and universities) in China. We used advanced single-molecule real-time sequencing to analyze the species-level diversity of bacterial and fungal components in PM2.5 samples based on 16S and ITS ribosomal genes, respectively. We found significant differences in microbial diversity and community composition among the samples obtained from different educational institutions and pollution levels. In particularly, junior schools exhibited higher PM2.5 concentrations (62.2-86.6 µg/m3) than other schools (14.4-48.4 µg/m3). Moreover, microbial variations in PM2.5 samples were associated with institution type. Notably, the prevailing pathogenic microorganisms included Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus haemolyticus, Streptococcus pneumoniae, and Schizophyllum commune, all of which were identified as Class II Pathogenic Microorganisms in school settings. Four potentially novel strains of S. commune were identified in PM2.5 samples collected from the university; the four strains showed 92.4 %-94.1 % ITS sequence similarity to known Schizophyllum isolates. To the best of our knowledge, this is the first study to explore bacterial and fungal diversity within PM2.5 samples from nursery schools to universities. Overall, these findings contribute to the existing knowledge of school environmental microbiology to ensure the health and safety of students and staff and impacting public health.

Online quantification of nicotine in e-cigarette aerosols by vacuum ultraviolet photoionization mass spectrometry.

The growing popularity of e-cigarettes and the associated risks of nicotine addiction present a new challenge to global public health security. Measuring the nicotine levels in e-cigarette aerosols is essential to assess the safety of e-cigarettes. In this study, a rapid in situ method was developed for online quantification of nicotine in e-cigarette aerosols by using a homemade vacuum ultraviolet photoionization aerosol mass spectrometer (VUV-AMS). E-cigarette liquids with different nicotine concentrations were prepared to generate aerosols containing different levels of nicotine, which were employed as the calibration sources for nicotine quantification by VUV-AMS. The results showed that the mass concentration of nicotine in e-cigarette aerosols has a good linear relationship with its signal intensity in the mass spectrum, and the limits of detection and quantitation of nicotine by VUV-AMS were found to be 2.0 and 6.2 µg per puff respectively. Then the online method was utilized to measure five commercial e-cigarettes, and their nicotine yields were determined to be between 31 and 188 µg per puff with the nicotine fluxes from 7.7 to 70 µg s-1, agreeing with the results of the gas chromatography with a flame ionization detector (GC-FID). This study demonstrated the feasibility and advantages of VUV-AMS for quick quantification of nicotine in e-cigarette aerosols within seconds.

Chemical composition and source apportionment of ambient PM2.5 in a coastal urban area, Northern Poland.

Coastal urban areas impact atmospheric chemistry and air quality through various sources, interactions, and processes. This study examines the mass concentrations of fine mode (PM2.5) aerosol and its major and trace components (Al, As, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mo, Mn, Na, Ni, Pb, Sb, Se, Sr, Te, Ti, Tl, V, Zn). The comprehensive field measurements were conducted in Poland between September 2019 and May 2020. Seasonal distribution and drivers of these pollutants showed considerable variability. In winter, higher concentrations were observed for Pb, Co, and As due to the higher contribution of pyrogenic emission. The Principal Component Analysis provided evidence of anthropogenic sources of trace species associated with coal combustion by industry/power plants, brake wear-related emissions, vehicle emissions, shipping activities, road-resuspended dust, and urban construction activities. These results showed that major chemical elements (Ca, Na, Fe, Mg, Al, and K) contributed to 4.07-34.0% of all components. Se, Zn, and Br contributed 1.29%, 1.25%, and 1.04%, respectively, while other tracers ranged between 0.07% and 0.95%. The diagnostic ratio of V/Ni remained stable between 0.45 and 0.46 during the cold season, then increased in spring, indicating that ship emissions were an important source of these metals during the warm season.

The impact of bioaerosol trajectories on microbial community assembly and physicochemical dynamics in the atmosphere.

This study explored the assembly mechanisms and physicochemical dynamics of microbial communities within atmospheric bioaerosols, focusing on the influence of different aerial trajectories. Over two years, samples near Seoul were classified into 'North', 'Southwest', and 'Others' categories based on their aerial trajectories. Physicochemical analysis of the PM2.5 particles revealed distinct ion compositions for each cluster, reflecting diverse environmental influences. Microbial community analysis revealed that shared dominant bacterial phyla were present in all clusters. However, distinct taxonomic profiles and biomarkers were also evident, such as coastal bacteria in the 'Southwest' cluster correlating with wind speed, and arid soil-originated bacteria in the 'North' cluster correlating with cations. These findings demonstrate that biomarkers in each cluster are representative of the distinct environments associated with their aerial trajectories. Notably, cluster 'Southwest' the highest microbial diversity and a strong alignment with the neutral community model, suggesting a large influence of passive dispersal from marine environments. Contrarily, 'North' and 'Others' were more influenced by niche-dependent factors. This study highlights the complex interplay between environmental factors and microbial dynamics in bioaerosols and provides important insights for environmental monitoring and public health risk assessment.

Mapping the spatial distribution of primary and secondary PM2.5 in a multi-industrial city by combining monitoring and modeling results.

Industrial cities are strongly influenced by primary emissions of PM2.5 from local industries. In addition, gaseous precursors, such as sulfur oxides (SOX), nitrogen oxides (NOX), and volatile organic compounds (VOCs), emitted from industrial sources, undergo conversion into secondary inorganic and organic aerosols (SIAs and SOAs). In this study, the spatial distributions of primary and secondary PM2.5 in Ulsan, the largest industrial city in South Korea, were visualized. PM2.5 components (ions, carbons, and metals) and PM2.5 precursors (SO2, NO2, NH3, and VOCs) were measured to estimate the concentrations of secondary inorganic ions (SO42-, NO3-, and NH4+) and secondary organic aerosol formation potential (SOAFP). The spatial distributions of SIAs and SOAs were then plotted by combining atmospheric dispersion modeling, receptor modeling, and monitoring data. Spatial distribution maps of primary and secondary PM2.5 provide fundamental insights for formulating management policies in different districts of Ulsan. For instance, among the five districts in Ulsan, Nam-gu exhibited the highest levels of primary PM2.5 and secondary nitrate. Consequently, controlling both PM2.5 and NO2 emissions becomes essential in this district. The methodology developed in this study successfully identified areas with dominant contributions from both primary emissions and secondary formation. This approach can be further applied to prioritize control measures during periods of elevated PM levels in other industrial cities.

Comparative analysis of CAMS aerosol optical depth data and AERONET observations in the Eastern Mediterranean over 19 years.

Aerosol optical depth (AOD) is an essential metric for evaluating the atmospheric aerosol load and its impacts on climate, air quality, and public health. In this study, the AOD data from the Copernicus Atmosphere Monitoring Service (CAMS) were validated against ground-based measurements from the Aerosol Robotic Network (AERONET) throughout the Eastern Mediterranean, a region characterized by diverse aerosol types and sources. A comparative analysis was performed on 3-hourly CAMS AOD values at 550 nm against observations from 20 AERONET stations across Cyprus, Greece, Israel, Egypt, and Turkey from 2003 to 2021. The CAMS AOD data exhibited a good overall agreement with AERONET AOD data, demonstrated by a Pearson correlation coefficient of 0.77, a mean absolute error (MAE) of 0.08, and a root mean square error (RMSE) of 0.11. Nonetheless, spatial and temporal variations were observed in the CAMS AOD data performance, with site-specific correlation coefficients ranging from 0.57 to 0.85, the lowest correlations occurring in Egypt and the highest in Greece. An underestimation of CAMS AOD was noted at inland sites with high AOD levels, while a better agreement was observed at coastal sites with lower AOD levels. The diurnal variation analysis indicated improved CAMS reanalysis performance during the afternoon and evening hours. Seasonally, CAMS reanalysis showed better agreement with AERONET AODs in spring and autumn, with lower correlation coefficients noted in summer and winter. This study marks the first comprehensive validation of CAMS AOD performance in the Eastern Mediterranean, offering significant enhancements for regional air quality and climate modeling, and underscores the essential role of consistent validation in refining aerosol estimations within this complex and dynamic geographic setting.

Emission and optical characteristics of brown carbon in size-segregated particles from three types of Chinese ships.

Brown carbon (BrC) is one of the important light absorption substances that have high light absorption ability under short wavelength light. However, limit studies have focused on the BrC emission from ships. In this study, size-segregated particulate matters (PM) were collected from three different types of ships, light absorption characteristics and size distribution of methanol-soluble BrC and water-soluble BrC in PM from ship exhausts were investigated. Results showed that four-stroke low-power diesel fishing boat (4-LDF) had the highest mass concentrations of methanol-soluble organic carbon (MSOC) and water-soluble organic carbon (WSOC), followed by 2-stroke high-power heavy-fuel-oil vessel (2-HHV), and four-stroke high-power marine-diesel vessel (4-HMV). While 2-HHV had obviously higher light absorption coefficients of methanol-soluble BrC (Abs365,M) and water-soluble BrC (Abs365,W) in unit weight of PM than the other two types of ships. The tested ships presented comparable or higher absorption efficiency of BrC in water extracts (MAE365,W) compared with other BrC emission sources. Majority of BrC was concentrated in fine particles, and the particle size distributions of both Abs365,M and Abs365,W showed bimodal patterns, peaking at 0.43-0.65 µm and 4.7-5.8 µm, respectively. However, different particle size distributions were found for MAE365,M between diesel and heavy fuel oil ships. Besides, different wavelength dependence in particles with different size were also detected. Ship exhaust could be confirmed as a non-ignorable BrC emission source, and complex influencing factor could affect the light absorption characteristics of ship emissions. Particle size should also be considered when light absorption ability of BrC was evaluated.

On-Site Bioaerosol Sampling and Airborne Microorganism Detection Technologies.

Bioaerosols are small airborne particles composed of microbiological fragments, including bacteria, viruses, fungi, pollens, and/or by-products of cells, which may be viable or non-viable wherever applicable. Exposure to these agents can cause a variety of health issues, such as allergic and infectious diseases, neurological disorders, and cancer. Therefore, detecting and identifying bioaerosols is crucial, and bioaerosol sampling is a key step in any bioaerosol investigation. This review provides an overview of the current bioaerosol sampling methods, both passive and active, as well as their applications and limitations for rapid on-site monitoring. The challenges and trends for detecting airborne microorganisms using molecular and immunological methods are also discussed, along with a summary and outlook for the development of prompt monitoring technologies.

Unveiling global land fine- and coarse-mode aerosol dynamics from 2005 to 2020 using enhanced satellite-based monthly inversion data.

Accurate fine-mode and coarse-mode aerosol knowledge is crucial for understanding their impacts on the climate and Earth's ecosystems. However, current satellite-based Fine-Mode Aerosol Optical Depth (FAOD) and Coarse-Mode Aerosol Optical Depth (CAOD) methods have drawbacks including inaccuracies, low spatial coverage, and limited temporal duration. To overcome these issues, we developed new global-scale FAOD and CAOD from 2005 to 2020 using a novel deep learning model capable of the synergistic retrieval of two aerosol sizes. After validation with the aerosol robotic network (AERONET) and sky radiometer network (SKYNET), the new monthly FAOD and CAOD showed significant improvements in accuracy and spatial coverage. From 2005 to 2020, the new data showed that China had the greatest decrease in FAOD and CAOD. In contrast, India and South Latin America had a significant increase in FAOD versus North Africa in CAOD. FAOD in the regions of Argentina, Paraguay, and Uruguay in South America have shown an upward trend. The results reveal that FAOD and CAOD display distinct patterns of change in the same regions, particularly on the west coast of the United States where FAOD is increasing, while CAOD is decreasing. Aside from the year 2020 due to the global COVID-19 pandemic, the analysis showed that although China has seen at least an +85% increase in energy consumption and urban expansion in 2019 compared to 2005 due to the needs of development and construction, the implementation of China's air pollution control policies has led to a significant decrease in FAOD (-46%) and CAOD (-65%) after 2013. This research enriches our comprehension of global fine and coarse aerosol patterns, additional investigations are needed to determine the potential global implications of these changes.

Size-selective sampler combined with an immunochromatographic assay for the rapid detection of airborne Legionella pneumophila.

Airborne biological aerosols (also called bioaerosols) are found in various environmental and occupational settings. Among these, pathogenic bioaerosols can cause diseases such as legionellosis, influenza, measles, and tuberculosis. To prevent or minimize people's exposure to these pathogenic bioaerosols in the field, a rapid detection method is required. In this study, a size-selective bioaerosol (SSB) sampler was combined with the immunochromatographic assay (ICA). The SSB sampler can collect bioaerosols on the sampling swab and the lateral flow test kit used in ICA can rapidly detect the pathogens in bioaerosols collected on the swab. Before testing the combined method, the lower limit of detection (LOD) of the lateral flow test kit was determined. Legionella pneumophila (L. pneumophila) was used as a target pathogen. The results show that at least 1.3 × 103L. pneumophila cells are required to be detected by the lateral flow test kit. To test the developed method, L. pneumophila suspension was aerosolized in the sampling chamber and collected using two SSB samplers with different sampling times (10 and 20 min). The developed method could detect aerosolized L. pneumophila and also estimate the concentrations from the lower LOD, sampling time, and formation of a positive line on a test strip. When positive results were obtained from sampling for 10 min and 20 min, concentrations of respirable L. pneumophila were estimated ≥5.2 × 104 CFUresp/m3 and ≥2.6 × 104 CFUresp/m3, respectively. The conventional sampler Andersen impactor with colony counting was also used for comparison. In all cases, the estimated concentrations obtained by the developed method were higher than those obtained by the conventional method. These findings confirm that the developed method can overcome the limitations of conventional methods and eventually benefit environmental and occupational health by providing a better method for risk assessment.

Organic tracers in fine and coarse aerosols at an urban Mediterranean site: contribution of biomass burning and biogenic emissions.

The concentrations of anhydrosugars (levoglucosan, mannosan, and galactosan), polyols (inositol, xylitol, sorbitol, and mannitol), and glucose were measured in PM1 and PM10 samples collected during 1 year at a traffic site in the city of Elche (southeastern Spain). Levoglucosan, mannosan, and galactosan were mainly found in the PM1 fraction since they are mainly emitted from biomass burning (BB). Likewise, inositol, xylitol, and sorbitol were primarily distributed in the fine mode, suggesting a non-negligible contribution from anthropogenic sources (specifically BB) to the levels of these compounds. This was supported by their seasonal variations, with higher concentrations during winter, and their correlations with levoglucosan concentrations. The average contributions of biomass burning and biogenic sources to OC and PM levels were calculated using levoglucosan and mannitol, respectively, as tracers. On average, BB accounted for 12% and 16% of the OC in PM1 and PM10, while the estimated contribution of fungal spores to OC and PM10 levels was 1.2 and 0.8%, respectively. The results of the present study suggest that, at least in the study area, most sugar alcohols are not appropriate tracers of biogenic emissions.