RESUMO
There are large masses of coal tar asphalt present in old roads, containing high concentrations of polycyclic aromatic hydrocarbons (PAHs). Uncertainty surrounding the risk they pose causes problems during road reconstruction and for the reuse of the asphalt present. To help elucidate potential risks, a parsimonious linear equilibrium partitioning model for the bioavailability of PAHs in soils contaminated by tar asphalt particles was developed. Furthermore, a set of partitioning coefficients for PAHs between sampled coal tar binders and water were determined experimentally, as well as measurements of freely dissolved concentrations using polyoxymethylene samplers in batch tests and column recirculation experiments with various mixtures of different soils (peat and sandy loam) and tar asphalts. The model predictions of freely dissolved concentrations were conservative and within an order of magnitude of measurements in both batch and column tests. The model presented here only relies on soil organic carbon content and the fraction coal tar binder in the soil to model PAH partitioning. This model could be used for more realistic. Low tier risk assessments towards rational prioritization of sensitive areas for risk reduction efforts.
Assuntos
Alcatrão , Hidrocarbonetos , Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Solo , Hidrocarbonetos Policíclicos Aromáticos/análise , Poluentes do Solo/análise , Alcatrão/química , Solo/química , Monitoramento Ambiental/métodos , Modelos QuímicosRESUMO
Research investigating the desorptive behaviour of PAHs from contaminated soils often overlooked the effects of source materials, especially coal tar and coal tar pitch and materials alike. In this study, a refined experimental approach was adopted to establish a simple-to-complex continuum of systems that allow the investigation of desorption kinetics of benzo(a)pyrene (BaP) and 3 other carcinogenic PAHs (cPAHs) over an incubation period of 48 d. By comparing the modelled desorption parameters, elucidation of the effects of PAH source materials on their desorptive behaviour was achieved. Desorption of cPAHs from coal tar and pitch was enhanced when they were added to soils, with rapidly desorbing fraction (Frap) of BaP increased from 0.68% for pitch to 1.10% and 2.66% for pitch treated soils, and from 2.57% for coal tar to 6.24% for coal tar treated soil G and 8.76% for coal tar treated sand (1 d). At 1 d, desorption of target cPAHs from solvent and source material spiked soils generally followed the order of solvent > coal tar > pitch. Increases in Frap of cPAHs were observed in coal tar-treated soils after 48 d soil incubation (0.33%-1.16% for soil M, p ≥ 0.05, 6.24%-9.21% for soil G, p < 0.05) and was attributed to the continuous migration of coal tar as a non-aqueous phase liquid (NAPL) into soil pore structures. Slow desorption was dominated by source materials, whereas the extents and rates of rapid desorption (Frap and krap) were more controlled by the quantity of soil organic matter (SOM), rather than quality of SOM (as in solvent-spiked soils). The results of this study challenged the role of PAH source materials as 'sinks' and led to the proposed roles of coal tar and pitch and source materials alike as 'reservoirs' with a risk-driven perspective.
Assuntos
Alcatrão , Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Carcinógenos , Alcatrão/química , Cinética , Hidrocarbonetos Policíclicos Aromáticos/análise , Solventes , Solo/química , Poluentes do Solo/análiseRESUMO
Coal tar residue (CTR) is acknowledged as hazardous industrial waste with high contents of carbon and toxic polycyclic aromatic hydrocarbons (PAHs). Microwave-assisted extraction for separating tar and residue in CTR was investigated to reduce the content of PAHs. The key operating factors such as solvent type, solvent addition amount, radiation temperature, and radiation time in the extraction process were evaluated. Results showed that extreme extraction performance in the solvent with cyclic structure was attained, and an enhancement in extraction efficiency was achieved in elevated solvent addition amount, radiation temperature, or radiation time in a certain range. The optimized conditions were determined as benzene was chosen as extractant, solvent-solid ratio of 5:1 mL/g, radiation temperature of 75 °C, and radiation time of 10 min. Relative extraction efficiency of CTR and reduction efficiency of 16 priority control PAHs were 28.70% and 92.82%, respectively. According to the characterizations of extracted residue (MCTR) and tar (MCT) under optimum experimental conditions, it is possible to convert them into value-added products (carbon materials, solid fuels, or chemicals). Solid-oil separation via microwave-assisted extraction is a safe and high-valued utilization approach for CTR.
Assuntos
Alcatrão , Hidrocarbonetos Policíclicos Aromáticos , Alcatrão/química , Hidrocarbonetos Policíclicos Aromáticos/química , Micro-Ondas , Solventes , CarbonoRESUMO
Tars are one of the most effective, unknown, and oldest therapies for psoriasis. They include coal tar (CT) and biomass-derived products. These treatments, particularly the CT, have proven to be cost-effective with long remission times compared to other systemic or topical treatments. However, they have hardly evolved in recent years, as they are not well-embraced by clinicians or patients because of concerns regarding cosmesis and safety. This review summarizes current knowledge about the chemical characterization, mechanism of action, toxicity, and clinical studies supporting the use of tars for psoriasis over the last decade. Trends within these above aspects are reviewed, and avenues of research are identified. CT is rich in polycyclic aromatic hydrocarbons, whereas biomass-derived tars are rich in phenols. While the activation of the aryl hydrocarbon receptor is involved in the antipsoriatic effect of CT, the mechanism of action of biomass-derived products remains to be elucidated. No conclusive evidence exists about the risk of cancer in psoriasis patients under CT treatment. Large, randomized, double-blind, controlled clinical trials are necessary to promote the inclusion of tars as part of modern therapies for psoriasis.
Assuntos
Alcatrão , Cosméticos , Fármacos Dermatológicos , Psoríase , Humanos , Alcatrões/efeitos adversos , Psoríase/tratamento farmacológico , Alcatrão/efeitos adversos , Alcatrão/química , Fármacos Dermatológicos/uso terapêutico , Ensaios Clínicos Controlados Aleatórios como AssuntoRESUMO
Pavement sealants are of environmental concern because of their complex petroleum-based chemistry and potential toxicity. Specifically, coal tar-derived sealants contain high concentrations of toxic/carcinogenic polycyclic aromatic hydrocarbons (PAHs) that, when weathered, can be transferred into the surrounding environment. Previous studies have demonstrated the effects of coal tar sealants on PAH concentration in nearby waterways and their harmful effects in aquatic ecosystems. Here, we investigate and compare the molecular composition of two different pavement sealants, petroleum asphalt- and coal tar-derived, and their photoproducts, by positive-ion (+) atmospheric pressure photoionization (APPI) and negative-ion (-) electrospray ionization (ESI) coupled with ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry to address species (high-boiling and/or high oxygen content) that lie outside the analytical window of other techniques due to ultra-high molecular complexity. In addition, we evaluate the toxicity of the water-soluble photoproducts by use of Microtox bioassay. The results demonstrate that the coal tar sealant contains higher amounts of PAHs and produces abundant water-soluble compounds, relative to unweathered materials, with a high abundance of PAH-like molecules of high toxicity. By comparison, the asphalt sealant produces fewer toxic water-soluble species, with molecular compositions that are consistent with natural dissolved organic matter. These results capture the mass, chemical diversity, toxicity, and source/photoproduct relationship of these compositionally complex emerging contaminants from the built environment.
Assuntos
Alcatrão , Petróleo , Hidrocarbonetos Policíclicos Aromáticos , Alcatrão/química , Alcatrão/toxicidade , Ciclotrons , Ecossistema , Análise de Fourier , Hidrocarbonetos , Espectrometria de Massas , Oxigênio/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Hidrocarbonetos Policíclicos Aromáticos/toxicidade , ÁguaRESUMO
An environmentally benign and cost-effective method was designed for isolating and purifying condensed arenes from acetone-extractable portion (AEP) of a high-temperature coal tar through a high pressure preparative chromatograph (HPPC) with different packings, including silica gel, octadecyl silane, octyl bonded silica gel, and diol bonded silica gel. In total, 196 compounds were detected with a gas chromatograph/mass spectrometer from AEP and its eluates. From the eluates, naphthalene, anthracene, phenanthrene, fluoranthene, and pyrene were successfully isolated and purified, and their structures were confirmed by their 1H and 13C nuclear magnetic resonance spectra in addition to their mass spectra. Extraction-HPPC device and solvent recovery process were designed and developed, which can potentially be applied to industrial production because the process is easy-to-operate and ecofriendliness. In addition, the solvents used can be easily recovered and reused, and neither waste water nor other pollutions are emitted.
Assuntos
Alcatrão/química , Cromatografia Gasosa-Espectrometria de Massas/métodos , Temperatura Alta , Hidrocarbonetos Policíclicos Aromáticos/isolamento & purificação , Pressão , Antracenos/isolamento & purificação , Fluorenos/isolamento & purificação , Naftalenos/isolamento & purificação , Fenantrenos/isolamento & purificação , Pirenos/isolamento & purificaçãoRESUMO
Tar oil is a complex mixture of hydrocarbon compounds obtained from high-temperature distillation of coal tar. It has been used for over 100 years from now to protect wood and has been applied to wood products, primary utility poles, and railroad ties by pressure methods. Composition of the tar oil depends on the source and typically consists of 85% polycyclic aromatic hydrocarbons (PAHs), 10% phenolic compounds, and 5% heterocyclic compounds. In this research, we performed the laboratory experiment to compare two types of tar oil: C and GX-Plus, and their effects on P-cycling enzymes (phosphatases) in sandy loam and loamy sand. Tar oil was applied to soil samples at the following doses: 2, 10, and 50 g kg-1. Soil without tar oil was used as a control sample. The experiment showed that the contamination of soil with tar oil affects the enzyme activities measured and with this most probably the P-cycle in soil. Phosphomonoesterases were the most sensitive to the contamination of soil with both type of tar oil: typeC and type GX-Plus. Greater changes in the enzymatic activity were observed in the loamy sand. Moreover, the type C tar oil demonstrated higher toxicity for phosphatases than type GX-Plus.
Assuntos
Alcatrão/química , Hidrocarbonetos/química , Monoéster Fosfórico Hidrolases/metabolismo , Poluentes do Solo/química , Solo/química , Alcatrão/análise , Hidrocarbonetos/análise , Monoéster Fosfórico Hidrolases/química , Polônia , Hidrocarbonetos Policíclicos Aromáticos/análise , Hidrocarbonetos Policíclicos Aromáticos/química , Poluentes do Solo/análiseRESUMO
PURPOSE: Crude coal tar and its derivatives have been used in modern medicine for the treatment of psoriasis since at least 1925 as part of the Goeckerman regimen. To this day, coal tar remains a safe and highly effective option for the treatment of psoriasis vulgaris. However, the mechanism by which coal tar has its therapeutic effect is unknown. This review summarizes current knowledge of the mechanism by which coal tar has its therapeutic effect in the treatment of psoriasis vulgaris. MATERIAL AND METHODS: A Pubmed search was conducted on March 13, 2017 for relevant English language journal articles on the subject and were relevant journal articles were included in this review. RESULTS: Crude coal tar consists of thousands of ingredients, many of which are unidentified. Of these ingredients, the most research has gone into analyzing polycyclic aryl hydrocarbons. These hydrocarbons are thought to be the most likely component of crude coal tar that leads to its effects in psoriasis. Of the aryl hydrocarbons, carbazole has been the most well studied in psoriasis and is hypothesized as being responsible for the treatment efficacy of crude coal tar. CONCLUSIONS: Polycyclic aryl hydrocarbons, and specifically carbazole, are thought to be the mechanism by which crude coal tar has its effect in psoriasis. However, further research is warranted to fully characterize the mechanism of action of crude coal tar, with the potential to create new therapies for psoriasis.
Assuntos
Alcatrão/metabolismo , Carbazóis/uso terapêutico , Alcatrão/química , Alcatrão/uso terapêutico , Humanos , Masculino , Óxido Nítrico Sintase Tipo II/metabolismo , Hidrocarbonetos Policíclicos Aromáticos/uso terapêutico , Psoríase/tratamento farmacológico , Psoríase/patologia , Fator de Transcrição STAT3/metabolismo , Resultado do TratamentoRESUMO
Bituminous coal-based magnetic activated carbon (MAC) was prepared, characterized, and used successfully for removal of cyclic volatile methylsiloxanes (cVMSs) from treated landfill leachate. Batch adsorption studies were performed at different adsorption dosages and contact times. With adsorptive dosage of 0.75 g/L and contact time of 60 min, the removal efficiencies achieved by MAC for octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) are 100, 82.8, and 71.4%, respectively. The specific magnetization coefficients of MAC before and after adsorption are 4.6 × 10-7 and 5.2 × 10-7 m3/kg, between 1.26 × 10-7 and 3.8 × 10-5 m3/kg, which suggests that MAC can be recycled by the high-intensity magnetic separators.
Assuntos
Carvão Vegetal/química , Carvão Mineral , Óxido Ferroso-Férrico/química , Siloxanas/análise , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Adsorção , Alcatrão/químicaRESUMO
Chemical analysis of soils contaminated with coal tar indicated that most organic compounds, and particularly PAHs, were contained in coarser particles (> 200 µm). Microscopic observations of this fraction, carried out on polished sections, reported the presence of organic particles in addition to mineral particles. Some organic particles had a very low porosity, and their microstructure did not evolve during biotreatment. Alternatively, other organic particles had a large porosity composed of an interconnected pore network that was open to coal tar surface and thus in contact with soil water. Interconnected porosity seemed to increase during biotreatment in relation to a decrease in the amount of organic compounds. The amount of open porosity in contact with soil water was expected to increase the desorption rate of PAHs. Consequently, the environmental hazard could depend on the amount of open porosity in addition to chemical properties of organic particles, such as their concentration in PAHs. Thus, microscopy can be complementary to chemical analysis and ecotoxicological assays to assess the best strategy for remediation but also to follow the advancement of a biotreatment.
Assuntos
Alcatrão/química , Ecotoxicologia/métodos , Monitoramento Ambiental/métodos , Substâncias Perigosas/análise , Microscopia , Poluentes do Solo/análise , Solo/química , Ecotoxicologia/instrumentação , Monitoramento Ambiental/instrumentação , Hidrocarbonetos Policíclicos Aromáticos/análiseRESUMO
Creosote is a distillation product of coal tar and is widely used as wood preservative for railway sleepers, utility poles and for other applications. Creosote can have potentially negative effects on the environment and many of the components are toxic. This study presents the analysis of a Creosote sample from a former wood impregnation plant located in the UK. The sample was analysed using two dimensional gas chromatography time-of-flight mass spectrometry (GCxGC-TOFMS) and a database of compounds that could be detected was produced. The GCxGG-TOFMS was capable of detecting 1505 individual compounds, which is far more than previous estimates for the number of compounds present within Creosote. Post extraction derivatization using BTSFA with 1% TMCS was employed to increase the potential number of compounds detected with 255 derivatized compounds detected, 231 of which would not have been detected without prior derivatization. Selected derivatized compounds were quantified with limits of detection ranging from 0.6 mg/kg to 1.6 mg/kg from a concentrated dense non-aqueous phase liquid (DNAPL). This work presents the first published full analysis of a Creosote using GCxGC-TOFMS combined with derivatization.
Assuntos
Creosoto/análise , Poluentes Ambientais/análise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Alcatrão/química , Creosoto/química , Poluentes Ambientais/toxicidade , Extração Líquido-LíquidoRESUMO
Investigations of environmental microbial communities are crucial for the discovery of populations capable of degrading hazardous compounds and may lead to improved bioremediation strategies. The goal of this study was to identify microorganisms responsible for aerobic benzene degradation in coal tar-contaminated groundwater. Benzene degradation was monitored in laboratory incubations of well waters using gas chromatography mass spectrometry (GC-MS). Stable isotope probing (SIP) experiments using [13C]benzene enabled us to obtain 13C-labled community DNA. From this, 16S rRNA clone libraries identified Gammaproteobacteria and Betaproteobacteria as the active benzene-metabolizing microbial populations. Subsequent cultivation experiments yielded nine bacterial isolates that grew in the presence of benzene; five were confirmed in laboratory cultures to grow on benzene. The isolated benzene-degrading organisms were genotypically similar (>97% 16S rRNA gene nucleotide identities) to the organisms identified in SIP experiments. One isolate, Variovorax MAK3, was further investigated for the expression of a putative aromatic ring-hydroxylating dioxygenase (RHD) hypothesized to be involved in benzene degradation. Microcosm experiments using Variovorax MAK3 revealed a 10-fold increase in RHD (Vapar_5383) expression, establishing a link between this gene and benzene degradation. Furthermore, the addition of Variovorax MAK3 to microcosms prepared from site waters accelerated community benzene degradation and correspondingly increased RHD gene expression. In microcosms using uninoculated groundwater, quantitative (q)PCR assays (with 16S rRNA and RDH genes) showed that Variovorax was present and responsive to added benzene. These data demonstrate how the convergence of cultivation-dependent and -independent techniques can boost understandings of active populations and functional genes in complex benzene-degrading microbial communities. IMPORTANCE: Benzene is a human carcinogen whose presence in contaminated groundwater drives environmental cleanup efforts. Although the aerobic biodegradation of benzene has long been established, knowledge of the identity of the microorganisms in complex naturally occurring microbial communities responsible for benzene biodegradation has evaded scientific inquiry for many decades. Here, we applied a molecular biology technique known as stable isotope probing (SIP) to the microbial communities residing in contaminated groundwater samples to identify the community members active in benzene biodegradation. We complemented this approach by isolating and growing in the laboratory a bacterium representative of the bacteria found using SIP. Further characterization of the isolated bacterium enabled us to track the expression of a key gene that attacks benzene both in pure cultures of the bacterium and in the naturally occurring groundwater microbial community. This work advances information regarding the documentation of microbial processes, especially the populations and genes that contribute to bioremediation.
Assuntos
Benzeno/metabolismo , Biodegradação Ambiental , Comamonadaceae/metabolismo , Dioxigenases/metabolismo , Poluentes Químicos da Água/metabolismo , Alcatrão/química , Comamonadaceae/genética , Dioxigenases/genética , Gammaproteobacteria/genética , Gammaproteobacteria/metabolismo , Água Subterrânea/química , Água Subterrânea/microbiologia , RNA Ribossômico 16S/genética , Poluição da ÁguaRESUMO
Hyper-crosslinked polymers (HCPs) are promising materials for gas capture and storage, but high cost and complicated preparation limit their practical application. In this paper, a new type of HCPs (CTHPs) was synthesized through a one-step mild Friedel-Crafts reaction with low-cost coal tar as the starting material. Chloroform was utilized as both solvent and crosslinker to generate a three-dimensional crosslinked network with abundant micropores. The maximum BET surface area of the prepared CTHPs could reach up to 929â m2 g-1 . Owing to the high affinity between the heteroatoms on the coal-tar building blocks and the CO2 molecules, the adsorption capacity of CTHPs towards CO2 reached up to 14.2â wt % (1.0â bar, 273â K) with a high selectivity (CO2 /N2 =32.3). Furthermore, the obtained CTHPs could adsorb 1.27â wt % H2 at 1.0â bar and 77.3â K, and also showed capacity for the capture of high organic vapors at room temperature. In comparison with other reported porous organic polymers, CTHPs have the advantages of low-cost, easy preparation, and high gas-adsorption performance, making them suitable for mass production and practical use in the future.
Assuntos
Dióxido de Carbono/química , Alcatrão/química , Hidrogênio/química , Compostos Orgânicos/química , Polímeros/química , Adsorção , Porosidade , Temperatura , VolatilizaçãoRESUMO
Coal tar (CT) is a thick black liquid produced as a by-product of coal carbonization to produce coke or manufactured gas. It is comprised a complex mixture of polycyclic aromatic compounds, including a wide range of polycyclic aromatic hydrocarbons (PAHs), many of which are genotoxic and carcinogenic. CT is used in some pavement sealants (also known as sealcoat), which are applied to pavement in order to seal and beautify the surface. Human exposure is known to occur not only during application, but also as a result of the weathering process, as elevated levels of PAHs have been found in settled house dust in residences adjacent to CT-sealed surfaces. In this study we examined the genotoxicity of an extract of a commercially available CT-based sealcoat in the transgenic Muta™Mouse model. Mice were orally exposed to 3 doses of sealcoat extract daily for 28 days. We evaluated genotoxicity by examining: (1) stable DNA adducts and (2) lacZ mutations in bone marrow, liver, lung, small intestine, and glandular stomach, as well as (3) micronucleated red blood cells. Significant increases were seen for each endpoint and in all tissues. The potency of the response differed across tissues, with the highest frequency of adducts occurring in liver and lung, and the highest frequency of mutations occurring in small intestine. The results of this study are the first demonstration of mammalian genotoxicity following exposure to CT-containing pavement sealcoat. This work provides in vivo evidence to support the contention that there may be adverse health effects in mammals, and potentially in humans, from exposure to coal tar. Environ. Mol. Mutagen. 57:535-545, 2016. © 2016 Her Majesty the Queen in Right of Canada.
Assuntos
Alcatrão/toxicidade , Materiais de Construção/toxicidade , Adutos de DNA/análise , Óperon Lac/genética , Micronúcleos com Defeito Cromossômico/induzido quimicamente , Mutação , Administração Oral , Animais , Alcatrão/química , Citometria de Fluxo , Camundongos Transgênicos , Testes de Mutagenicidade/métodos , Especificidade de Órgãos , Hidrocarbonetos Policíclicos Aromáticos/análiseRESUMO
In the present paper, we describe the fundamentals and analytical advantages of Oversampling Selective Accumulation Trapped Ion Mobility Spectrometry (OSA-TIMS) when coupled to ultrahigh resolution mass analyzers (e.g., FT-ICR MS). During TIMS analysis, ion packages are spatially resolved based on their mobilities along the TIMS analyzer axis and multiple strategies can be utilized during the trapping and elution of the ion population of interest. In the case of OSA-TIMS-FT-ICR MS, the TIMS operation sequence, trapping conditions, and operations are optimized to increase the signal-to-noise and the number of points across the mobility domain, which leads to more accurate mobility and mass measurements. Experimental results show that accurate ion-neutral collision cross sections (<1%) can be measured using OSA-TIMS-FT-ICR MS with high mobility resolving powers (RIMS up to 250), high mass accuracy (<1 ppm), and ultrahigh mass resolution (RMS up to 600-1200k at m/z 400) in a single analysis. The analytical advantages of OSA-TIMS over SA-TIMS were illustrated for the analysis of structural peptide isomers (SDGRG and GRGDS [M + H](+)), conformational isomers (AT-hook peptide 3 KRGRGRPRK [M + 2H](+2)), and a complex mixture of polyaromatic hydrocarbons (PAH) from coal tar. Baseline separation of the structural peptide isomers SDGRG and GRGDS, [M + H](+), was observed, and three conformations were identified for the AT-hook peptide 3 KRGRGRPRK [M + 2H](+2) during OSA-TIMS-FT-ICR MS. A 2-fold increase in the number of molecular features and a 2-6-fold signal-to-noise increase was observed for OSA-TIMS when compared with SA-TIMS during the PAH analysis. This work provides the proof-of-principle for further application of OSA-TIMS-FT-ICR MS for the unsupervised analysis of complex mixtures based on the characterization of the conformational space and the assignment of chemical formulas in a single analysis.
Assuntos
Espectrometria de Mobilidade Iônica , Peptídeos/análise , Espectrometria de Massas por Ionização por Electrospray , Sequência de Aminoácidos , Alcatrão/química , Análise de Fourier , Isomerismo , Nanotecnologia , Peptídeos/química , Hidrocarbonetos Policíclicos Aromáticos/análiseRESUMO
A methodology for the characterization of groups of polycyclic aromatic hydrocarbons (PAHs) using a combination of normal phase liquid chromatography with ultraviolet-visible spectroscopy (NPLC/UV-vis) and gas chromatography with mass spectrometry (GC/MS) was used for the identification and quantification of seven fused aromatic rings C26H14 peri-condensed benzenoid polycyclic aromatic hydrocarbons, PAHs, in standard reference material (SRM) 1597a, complex mixture of PAHs from coal tar. The NPLC/UV-vis isolated the fractions based on the number of aromatic carbons and the GC/MS allowed the identification and quantification of five of the nine C26H14 PAH isomers; naphtho[1,2,3,4-ghi]perylene, dibenzo[b,ghi]perylene, dibenzo[b,pqr]perylene, naphtho[8,1,2-bcd]perylene, and dibenzo[cd,lm]perylene using a retention time comparison with authentic reference standards. For the other four benzenoid isomers with no available reference standards the following two approaches were used. First, the annellation theory was used to achieve the potential identification of benzo[qr]naphtho[3,2,1,8-defg]chrysene, and second, the elution distribution in the GC fractions was used to support the potential identification of benzo[qr]naphtho[3,2,1,8-defg]chrysene and to reach the tentative identifications of dibenzo[a,ghi]perylene, naphtho[7,8,1,2,3-pqrst]pentaphene, and anthra[2,1,9,8-opqra]naphthacene. It is the first time that naphtho[1,2,3,4-ghi]perylene, dibenzo[b,ghi]perylene, dibenzo[b,pqr]perylene, naphtho[8,1,2-bcd]perylene, and dibenzo[cd,lm]perylene are quantified, and the first time that benzo[qr]naphtho[3,2,1,8-defg]chrysene is potentially identified, in any sample, in any context.
Assuntos
Técnicas de Química Analítica/métodos , Alcatrão/química , Hidrocarbonetos Policíclicos Aromáticos/análise , Crisenos/análise , Cromatografia Gasosa-Espectrometria de Massas , Perileno/análise , Hidrocarbonetos Policíclicos Aromáticos/isolamento & purificaçãoRESUMO
We have developed a simple, scalable, transfer-free, ecologically sustainable, value-added method to convert inexpensive coal tar pitch to patterned graphene films directly on device substrates. The method, which does not require an additional transfer process, enables direct growth of graphene films on device substrates in large area. To demonstrate the practical applications of the graphene films, we used the patterned graphene grown on a dielectric substrate directly as electrodes of bottom-contact pentacene field-effect transistors (max. field effect mobility ~0.36 cm(2)·V(-1)·s(-1)), without using any physical transfer process. This use of a chemical waste product as a solid carbon source instead of commonly used explosive hydrocarbon gas sources for graphene synthesis has the dual benefits of converting the waste to a valuable product, and reducing pollution.
Assuntos
Alcatrão/química , Eletrodos , Grafite/química , Resíduos Industriais , Transistores Eletrônicos , Grafite/síntese química , Naftacenos/química , Níquel/química , Reciclagem , Análise Espectral RamanRESUMO
Self-sustaining treatment for active remediation (STAR) is an emerging, smoldering-based technology for nonaqueous-phase liquid (NAPL) remediation. This work presents the first in situ field evaluation of STAR. Pilot field tests were performed at 3.0 m (shallow test) and 7.9 m (deep test) below ground surface within distinct lithological units contaminated with coal tar at a former industrial facility. Self-sustained smoldering (i.e., after the in-well ignition heater was terminated) was demonstrated below the water table for the first time. The outward propagation of a NAPL smoldering front was mapped, and the NAPL destruction rate was quantified in real time. A total of 3700 kg of coal tar over 12 days in the shallow test and 860 kg over 11 days in the deep test was destroyed; less than 2% of total mass removed was volatilized. Self-sustaining propagation was relatively uniform radially outward in the deep test, achieving a radius of influence of 3.7 m; strong permeability contrasts and installed barriers influenced the front propagation geometry in the shallow test. Reductions in soil hydrocarbon concentrations of 99.3% and 97.3% were achieved in the shallow and deep tests, respectively. Overall, this provides the first field evaluation of STAR and demonstrates that it is effective in situ and under a variety of conditions and provides the information necessary for designing the full-scale site treatment.
Assuntos
Alcatrão/química , Poluição Ambiental/análise , Recuperação e Remediação Ambiental/métodos , Poluentes do Solo/análise , Carvão Mineral , Hidrocarbonetos/isolamento & purificação , Peso Molecular , Petróleo/análise , Projetos Piloto , Solo , Temperatura , VolatilizaçãoRESUMO
A novel route to fabricate low-cost porous carbon nanofibers (CNFs) using biomass tar, polyacrylonitrile (PAN), and silver nanoparticles has been demonstrated through electrospinning and subsequent stabilization and carbonization processes. The continuous electrospun nanofibers had average diameters ranging from 392 to 903 nm. The addition of biomass tar resulted in increased fiber diameters, reduced thermal stabilities, and slowed cyclization reactions of PAN in the as-spun nanofibers. After stabilization and carbonization, the resultant CNFs showed more uniformly sized and reduced average diameters (226-507 nm) compared to as-spun nanofibers. The CNFs exhibited high specific surface area (>400 m(2)/g) and microporosity, attributed to the combined effects of phase separations of the tar and PAN and thermal decompositions of tar components. These pore characteristics increased the exposures and contacts of silver nanoparticles to the bacteria including Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, leading to excellent antimicrobial performances of as-spun nanofibers and CNFs. A new strategy is thus provided for utilizing biomass tar as a low-cost precursor to prepare functional CNFs and reduce environmental pollutions associated with direct disposal of tar as an industrial waste.
Assuntos
Resinas Acrílicas/química , Fenômenos Fisiológicos Bacterianos/efeitos dos fármacos , Alcatrão/química , Nanopartículas Metálicas/administração & dosagem , Nanofibras/administração & dosagem , Prata/administração & dosagem , Antibacterianos/administração & dosagem , Antibacterianos/química , Carbono/química , Sobrevivência Celular/efeitos dos fármacos , Galvanoplastia/métodos , Nanopartículas Metálicas/química , Nanofibras/química , Porosidade , Rotação , Prata/químicaRESUMO
Several studies have shown high concentrations of polycyclic aromatic hydrocarbons (PAHs) in living spaces and soil adjacent to parking lots sealed with coal-tar-based products. Recent attention has been paid to the presence of seven PAHs in coal-tar samples, namely, benz[a]anthracene, benzo[k]-fluoranthene, benzo[b]fluoranthene, benzo[a]pyrene, chrysene, dibenz[a,h]anthracene, and indeno[1,2,3-cd]pyrene, and their association to significant increases in estimated excess lifetime cancer risk for nearby residents. Herein, we present an analytical approach to screen the presence of five highly toxic, high-molecular weight PAHs (HMW-PAHs) in coal-tar samples. These include dibenzo[a,l]pyrene, dibenzo[a,i]pyrene, dibenzo[a,e]pyrene, dibenzo[a,h]pyrene, and naphtho[2,3-a]pyrene. Their direct analysis, without chromatographic separation, in a reference coal-tar sample is made possible with the combination of excitation-emission matrices (EEMs) and parallel factor analysis (PARAFAC). EEMs are recorded at 4.2 K with the aid of a cryogenic fiber-optic probe and a commercial spectrofluorimeter. The simplicity of the experimental procedure and the excellent analytical figures of merit demonstrate the screening potential of this environmentally friendly approach for the routine analysis of numerous coal-tar samples.