Preparation of Acetylated Grapefruit Peel Polysaccharide.

Grapefruit peel polysaccharide has antioxidant, antitumor, hypoglycemic and other biological activities, and chemical modification can further improve the properties of the polysaccharide. Acetylation modification of polysaccharides has the advantages of simple operation, low cost and little pollution, and is widely used at present. Different degrees of acetylation modification have different effects on the properties of polysaccharides, so it is necessary to optimize the preparation technology of acetylated grapefruit peel polysaccharides. In this article, acetylated grapefruit peel polysaccharide was prepared by acetic anhydride method. With the degree of acetyl substitution as the evaluation index, combined with the analysis of sugar content and protein content in the polysaccharide before and after modification, the effects of three feeding ratios of 1:0.6, 1 : 1.2 and 1 : 1.8 (polysaccharide: acetic anhydride, mass/volume) on acetylation modification were explored through single factor experiments. The results showed that the optimum ratio of material to liquid for acetylation modification of grapefruit peel polysaccharide was 1:0.6. Under these conditions, the degree of substitution of acetylated grapefruit peel polysaccharide was 0.323, the sugar content was 59.50 % and the protein content was 1.038 %. The results provide some reference for the study of acetylated grapefruit peel polysaccharide.

The inhibitory effect and mechanism of small molecules on acetic anhydride-induced BSA acetylation and aggregation.

Protein acetylation is a significant post-translational modification, and hyperacetylation results in amyloid aggregation, which is closely related to neurodegenerative diseases (Alzheimer's disease, Huntington's disease, and so on). Therefore, it is significant to inhibit the hyperacetylation of proteins and their induced aggregation. In the present study, we aimed to explore the anti-acetylation and anti-amyloid properties of five small molecules (gallic acid, menadione, resveratrol, apigenin, and quercetin) in the process of acetic anhydride-induced protein hyperacetylation and its aggregation. Optical detection methods, such as SDS-PAGE, inverted fluorescence microscopy, and endogenous fluorescence spectroscopy, were used to investigate the effects of small molecules on protein acetylation, aggregation, and structure. In addition, fluorescence quenching and molecular docking techniques were used to explore the relationship between small molecules and acetylation. The results showed that gallic acid (200 µM), menadione (100 µM), quercetin (40 µM), resveratrol (5 µM), and apigenin (20 µM) (unmodified rates were 61.12 %, 67.76 %, 65.11 %, 62.66 %, and 67.81 %, respectively) had strong inhibitory effects on acetylation, and there was no significant difference (P < 0.05). In addition, gallic acid (200 µM), menadione (100 µM), and resveratrol (5 µM) (inhibition rates of 29.89 %, 26.53 %, and 26.09 %, respectively) had more substantial inhibitory effects on protein aggregation, indicating that the five small molecules could inhibit acetic anhydride-induced hyperacetylation and protein aggregation. The underlying mechanism might be that it could inhibit hyperacetylation and resist amyloid aggregation by interacting with proteins to occupy acetylation sites. Collectively, our findings showed that gallic acid, menadione, and resveratrol could potentially prevent and treat neurodegenerative diseases, such as Alzheimer's disease, by inhibiting acetylation and acetylation-induced aggregation.

Impact of acetylation process of kraft lignin in development of environment-friendly semisolid lubricants.

The aim of this work was to study the influence of the acetylation process of kraft lignin on developing dispersions potentially applicable as new bio-based semisolid lubricants. Lignin was functionalized with acetic anhydride and pyridine as a catalyst by modifying different reaction variables (temperature, ratio of pyridine/acetic anhydride and time). Acetylated lignin was analyzed using FTIR, 1H and 13C NMR techniques, TGA, DSC and SEM to evaluate the chemical, morphological and thermal changes induced by the acetylation process. The influence of the acetylation process on the rheological and tribological properties of dispersions was related to the development of different microstructures, which depend on chemical and morphological properties of acetylated lignin. In this sense, two different rheological behaviours (gel-like or fluid-like) were found to depend on the reaction time. From the experimental results obtained, it can be concluded that the acetylation process is a key issue to modulate rheological and morphological properties of dispersions, resulting in an effective method to improve the compatibility of lignin and castor oil. Acetylated lignin with medium degrees of substitution with adequate morphological properties can be potentially used as an effective thickening agent to develop semisolid lubricants.

Improvement of methods for analysing sucrose acetate isobutyrate (SAIB) in soft drinks using GC-FID and evaluating antioxidant effects in the SAIB emulsion system.

Sucrose acetate isobutyrate SAIB (E444) is a mixture produced by the esterification of sucrose with acetic anhydride and isobutyric anhydride. It is a food additive that is used as an emulsifier in soft drinks. It is difficult to analyse SAIB quantitatively because there are 256 synthesisable structures in the mixture. This study developed an analytical method for SAIB using gas chromatography-flame ionization detection (GC-FID). The pre-treatment of SAIB in soft drinks was performed using a liquid-liquid extraction method, which demonstrated a recovery rate of 107.8 ± 7.2%. In the GC-FID analysis of SAIB, numerous peaks were observed in the chromatogram, and the content of SAIB was calculated as the sum of these peak areas. A series of analytical methods were validated according to International Conference for Harmonization (ICH) guidelines. Accordingly, the applicability of the developed analytical method was confirmed for both domestic and imported soft drinks distributed in Korea. Additionally, in the linoleic acid emulsion, SAIB exhibited better lipid oxidation stability than the natural antioxidant α-tocopherol and had similar efficacy to the synthetic antioxidant butylated hydroxytoluene (BHT). Although SAIB has excellent lipid oxidation stability, it must be used within legal standards according to consumer demand to reduce the use of synthetic materials in processed foods. The validated GC-FID analytical method will enable subsequent monitoring of the distributed products.

∆8-THC, THC-O Acetates and CBD-di-O Acetate: Emerging Synthetic Cannabinoids Found in Commercially Sold Plant Material and Gummy Edibles.

Presented is the analysis of four cannabinoid-based products. These products were part of a case involving visual and auditory hallucinations that precipitated the commission of a felony and subsequent arrest. The products were labeled to contain ∆8-tetrahydrocannabinol (∆8-THC) or THC acetate (THC-O-A). Primary reference materials were not available for ∆8-THC-O-A, ∆10-THC-O-A, cannabidiol di-acetate (CBD-di-O-A) or respective deuterated internal standards. THC-O-A and CBD-di-O-A standards were prepared by derivatizing ∆8-THC, ∆9-THC, ∆10-THC, CBD, ∆9-THC-d3 and CBD-d3 using acetic anhydride. The cannabinoid-based products were determined to contain ∆8-THC, ∆8-THC-O-A, ∆9-THC-O-A and CBD-di-O-A and/or other phytocannabinoids using three different analytical techniques. Direct analysis in real-time-time-of-flight mass spectrometry was used for identifying exact masses. A gas chromatograph-mass spectrometer was used for the identification of compounds and to quantitate THC-O-As in the products. A liquid chromatograph-tandem mass spectrometer was used to identify and quantitate phytocannabinoids and CBD-di-O-A in the products. To the authors' knowledge, this is the first case report involving the identification of THC-O-As and CBD-di-O-A in commercially available products. Minimal clinical/pharmacological data is available for these emerging synthetic cannabinoids/novel psychoactive substances.

Green synthesis of acetylated maize starch in different imidazolium carboxylate and choline carboxylate ionic liquids.

This work demonstrates that acetylated maize starches (AMS) with varied degree of substitution (DS, 0.26-2.63) was synthesized in ionic liquids (ILs) (imidazolium chloride, imidazolium carboxylate and choline carboxylate) at 85 °C without catalyst. The DS of AMS and reaction efficiency increased with decreasing alkyl chain length of cations or anions, while decreased as the choline cation replaced the imidazolium cation and the chloride anion replaced the acetate anion. The AMS synthesized in imidazolium-based ILs exhibited much higher hydrophobicity and thermal stability than the native starch. Rheological properties of ILs and ATR-FTIR analysis of acetic anhydride/ILs mixtures indicated that a shorter alkyl side chain or the combination of an imidazolium cation and an acetate anion gave ILs lower viscosities and weaker interactions between acetic anhydride molecules, which favored the acetylation of starch. These findings provide insights into the design of green processes to modify starch and the application of acetylated starch.

Multicomponent synthesis of fully substituted thiazoles using glycine-based dithiocarbamates, acetic anhydride and nitroalkenes.

Reaction of glycine-based dithiocarbamates with nitroalkenes in the presence of acetic anhydride was utilized for the synthesis of fully substituted 2-(alkylsulfanyl)-4-(nitroalkyl)-5-acyloxy-1,3-thiazoles. The reaction proceeds via the in situ formation of thiazol-5(4H)-one from glycine-based dithiocarbamates, followed by the Michael addition of this intermediate to nitroalkenes, aromatization, and esterification reaction cascade. This new one-pot three-component reaction afforded a diverse library of fully substituted thiazoles in high to excellent yields under solvent-free conditions.

Qualitative and quantitative determination of tilmicosin in poultry eggs by gas chromatography tandem mass spectrometry after derivatization with acetic anhydride.

A novel GC-MS/MS analytical method was established for the qualitative and quantitative determination of tilmicosin in poultry (Jinghai yellow chicken, Gaoyou duck and Yangzhou goose) eggs. The method was based on LLE and SPE for sample extraction and purification. Pyridine and acetic anhydride were used for the derivatization reaction. When tilmicosin was added to blank poultry egg samples at the LOQ and 75 µg/kg, 150 µg/kg, and 300 µg/kg, the recoveries ranged from 72.80% to 88.75%, the intraday and interday RSDs ranged from 2.31% to 4.56% and 3.29%-5.61%, respectively, and the LODs and LOQs ranged from 3.8 to 5.6 µg/kg and 8.4-10.5 µg/kg, respectively. These results confirmed that the parameters of this novel method meet the requirements of the FAO & WHO (2014) for veterinary drug residue testing. Poultry egg samples purchased from the local market were analysed according to the established method and only one egg sample was found to contain 18.9 µg/kg of tilmicosin.

Unexpected Reaction Products of Uracil and Its Methyl Derivatives with Acetic Anhydride and Methylene Chloride.

New acetyl derivatives of uracil, 6-methyluracil, and thymine were obtained in the course of an unconventional synthesis in methylene chloride. It was shown that products with the acetyloxymethyl fragment are formed according to a mechanism different from that for products with the acetyloxyethyl group. In particular, for uracil it was proven that the reaction with Ac2O, TEA, and CH2Cl2 leads to 1-acetyloxymethyluracil, where the N1 substituent is composed of the -CH2- fragment that originated from CH2Cl2 and the 1-acetyloxy moiety from Ac2O. The reaction of uracil with Ac2O, TEA, CH2Cl2, and DMAP leads to an acetyloxyethyl derivative in which the -CH2-CH2- fragment originates from TEA and the 1-acetyloxy moiety from Ac2O. A possible mechanism for the formation of new compounds was suggested and supported by the density functional theory/B3LYP quantum mechanical calculations. New compounds (39 in total, including seven deuterated) were fully characterized by nuclear magnetic resonance and high-resolution mass spectrometry techniques.

Trimethylacetic Anhydride-Based Derivatization Facilitates Quantification of Histone Marks at the MS1 Level.

Histone post-translational modifications (hPTMs) are epigenetic marks that strongly affect numerous processes, including cell cycling and protein interactions. They have been studied by both antibody- and MS-based methods for years, but the analyses are still challenging, mainly because of the diversity of histones and their modifications arising from high contents of reactive amine groups in their amino acid sequences. Here, we introduce use of trimethylacetic anhydride (TMA) as a new reagent for efficient histone derivatization, which is a requirement for bottom-up proteomic hPTM analysis. TMA can derivatize unmodified amine groups of lysine residues and amine groups generated at peptide N-termini by trypsin digestion. The derivatization is facilitated by microwave irradiation, which also reduces incubation times to minutes. We demonstrate that histone derivatization with TMA reliably provides high yields of fully derivatized peptides and thus is an effective alternative to conventional methods. TMA afforded more than 98% and 99% labeling efficiencies for histones H4 and H3, respectively, thereby enabling accurate quantification of peptide forms. Trimethylacetylation substantially improves chromatographic separation of peptide forms, which is essential for direct quantification based on signals extracted from MS1 data. For this purpose, software widely applied by the proteomics community can be used without additional computational development. Thorough comparison with widely applied propionylation highlights the advantages of TMA-based histone derivatization for monitoring hPTMs in biological samples.

The Annealing of Acetylated Potato Starch with Various Substitution Degrees.

This study aimed to determine the effect of "annealing" acetylated potato starch with a homogenous granule size and various degrees of substitution on the thermal pasting characteristics (DSC), resistance to amylases, rheology of the prepared pastes, swelling power and dynamics of drug release. A fraction of large granules was separated from native starch with the sedimentation method and acetylated with various doses of acetic anhydride (6.5, 13.0 or 26.0 26 cm3/100 g starch). The starch acetates were then annealed at slightly lower temperatures than their pasting temperatures. The annealing process caused an almost twofold increase in the resistance to amylolysis and a threefold increase in the swelling power of the modified starch preparations. The heat of phase transition decreased almost two times and the range of starch pasting temperatures over two times, but the pasting temperature itself increased by ca. 10 °C. The 40 g/100 g addition of the modified starch preparation decreased the rate of drug release from a hydrogel by ca. one-fourth compared to the control sample.

Effect of Acetylation on Physicochemical and Functional Properties of Commercial Pumpkin Protein Concentrate.

The purpose of the present study was to determine the effects of acetylation with different doses of acetic anhydride on the chemical composition and chosen functional properties of commercial pumpkin protein concentrate (PPC). The total protein content decreased as compared to unmodified samples. Electrophoretic analysis revealed that in the acetylated pumpkin protein, the content of the heaviest protein (35 kDa) decreased in line with increasing concentrations of modifying reagent. Acetylation of PPC caused a significant increase in water-binding and oil-absorption capacity and for emulsifying properties even at the dose of 0.4 mL/g. Additionally, an increase in foaming capacity was demonstrated for preparations obtained with 2.0 mL/g of acetic anhydride, whereas acetylation with 0.4 and 1.0 mL/g caused a decrease in protein solubility as compared to native PPC.

Surface hydrophobization of pulp fibers in paper sheets via gas phase reactions.

Hydrophobization of cellulosic materials and particularly paper products is a commonly used procedure to render papers more resistant to water and moisture. Here, we explore the hydrophobization of unsized paper sheets via the gas phase. We employed three different compounds, namely palmitoyl chloride (PCl), trifluoroacetic anhydride/acetic anhydride (TFAA/Ac2O)) and hexamethyldisilazane (HMDS) which were vaporized and allowed to react with the paper sheets via the gas phase. All routes yielded hydrophobic papers with static water contact angles far above 90° and indicated the formation of covalent bonds. The PCl and TFAA approach negatively impacted the mechanical and optical properties of the paper leading to a decrease in tensile strength and yellowing of the sheets. The HMDS modified papers did not exhibit any differences regarding relevant paper technological parameters (mechanical properties, optical properties, porosity) compared to the non-modified sheets. XPS studies revealed that the HMDS modified samples have a rather low silicon content, pointing at the formation of submonolayers of trimethylsilyl groups on the fiber surfaces in the paper network. This was further investigated by penetration dynamic analysis using ultrasonication, which revealed that the whole fiber network has been homogeneously modified with the silyl groups and not only the very outer surface as for the PCl and the TFAA modified papers. This procedure yields a possibility to study the influence of hydrophobicity on paper sheets and their network properties without changing structural and mechanical paper parameters.

Fabrication of hydrophobic and high-strength packaging films based on the esterification modification of galactomannan.

There is an increasing interest in substituting current packaging films with biologically-derived films without compromising mechanical properties and hydrophobicity. In this work, the esterified galactomannan (E-GM) films with good hydrophobicity, excellent oxygen barrier performance and high tensile mechanical strength were synthesized using anhydride esterification method prior to film formation. The hydrophobicity, mechanical properties, barrier properties, thermal stability and ultraviolet absorption of the prepared films were determined to fully investigate the features of galactomannan-based films. The results indicated that GM films can be successfully obtained by esterification. Compared to neat GM film, E-GM-1.5 film (acetic anhydride to GM of 1.5:1) achieved the highest degree of esterification (0.05), hydrophobicity (107°) and mechanical strength (92.0 MPa). In addition, the esterified GM films had lower toxicity for macrophages cells. The prepared E-GM films may provide more opportunities for further advancement and applications in the development of food packaging from natural resources.

Probing Substrate/Catalyst Effects Using QSPR Analysis on Friedel-Crafts Acylation Reactions over Hierarchical BEA Zeolites.

Attempts to optimize heterogeneous catalysis often lack quantitative comparative analysis. The use of kinetic modelling leads to rate (k) and relative sorption equilibrium constants (K), which can be further rationalized using Quantitative Structure-Property Relationships (QSPR) based on Multiple Linear Regressions (MLR). Friedel-Crafts acylation using commercial and hierarchical BEA zeolites as heterogeneous catalysts, acetic anhydride as the acylating agent, and a set of seven substrates with different sizes and chemical functionalities were herein studied. Catalytic results were correlated with the physicochemical properties of substrates and catalysts. From this analysis, a robust set of equations was obtained allowing inferences about the dominant factors governing the processes. Not entirely surprising, the rate and sorption equilibrium constants were found to be explained in part by common factors but of opposite signs: higher and stronger adsorption forces increase reaction rates, but they also make the zeolite active sites less accessible to new reactant molecules. The most relevant parameters are related to the substrates' molecular size, which can be associated with different reaction steps, namely accessibility to micropores, diffusion capacity, and polarizability of molecules. The relatively large set of substrates used here reinforces previous findings and brings further insights into the factors that hamper/speed up Friedel-Crafts reactions in heterogeneous media.

Efficient Synthesis of α-Branched Purine-Based Acyclic Nucleosides: Scopes and Limitations of the Method.

An efficient route to acylated acyclic nucleosides containing a branched hemiaminal ether moiety is reported via three-component alkylation of N-heterocycle (purine nucleobase) with acetal (cyclic or acyclic, variously branched) and anhydride (preferentially acetic anhydride). The procedure employs cheap and easily available acetals, acetic anhydride, and trimethylsilyl trifluoromethanesulfonate (TMSOTf). The multi-component reaction is carried out in acetonitrile at room temperature for 15 min and provides moderate to high yields (up to 88%) of diverse acyclonucleosides branched at the aliphatic side chain. The procedure exhibits a broad substrate scope of N-heterocycles and acetals, and, in the case of purine derivatives, also excellent regioselectivity, giving almost exclusively N-9 isomers.

Study and optimization of parameters affecting the acetylation process of lignin sulfonate biopolymer.

Here, firstly lignin sulfonate was produced from sulfite liquor provided by Mazandaran wood & paper industries (Chookam). Then, the role of effective parameters including reaction temperature, duration time, and amounts of pyridine and acetic anhydride respectively as the catalyst and the esterification agent on the acetylation rate of lignin sulfonate were studied and the process parameters were optimized through multiple experiments. In this investigation, using 1 g lignin sulfonate, the effect of various levels of temperature (ranged from room temperature to 140 °C), reaction time (12-72 h), pyridine volume (0-30 mL), and acetic anhydride volume (5-30 mL) were evaluated. Based on the results of several esterification processes, the optimal values of temperature and reaction time were obtained to be 100 °C and 48 h, respectively, and the optimal volumes of acetic anhydride and pyridine were 20 mL (with equal amounts). Besides, the characterization tests of lignin sulfonate and acetylated lignin sulfonate were performed using FT-IR and NMR techniques. Also in this paper, the morphology and crystallinity/amorphicity of lignin sulfonate and acetylated lignin sulfonate were examined using SEM images and XRD patterns.

Effect of pre-acetylation of hydroxyl functional groups by choline chloride/acetic anhydride on subsequent lignin pyrolysis.

In this work, an emerging and efficient strategy for the preparation of lignin samples with different acetylation degree by choline chloride/acetic anhydride (ChCl/Aa) treatment of pine kraft lignin (PKL) is reported, and the effects of efficient pre-acetylation of hydroxyl functional groups on subsequent lignin pyrolysis are also systematically investigated. The results show that the ChCl/Aa displays a high acetylation efficiency towards the aliphatic hydroxyl (~99.1%) and phenolic hydroxyl (~94.0%) of PKL, which enhances the hydrogen to carbon effective ratio of PKL. Noticeably, the ChCl/Aa has a slight effect on ß-O-4 of PKL, and the acetylation of hydroxyl is beneficial for the improvement of the maximum degradation rate of PKL. In addition, the acetylation of hydroxyl is also significantly contributed to the increment of the pyrolysis bio-oil yield. Importantly, the relative content of the H-phenols obtained from acetylated lignins pyrolysis shows a positive correlation with the acetylation degree of hydroxyl.

Sensing Precursors of Illegal Drugs-Rapid Detection of Acetic Anhydride Vapors at Trace Levels Using Photoionization Detection and Ion Mobility Spectrometry.

Sensitive real-time detection of vapors produced by the precursors, reagents and solvents used in the illegal drugs manufacture represents a priority nowadays. Acetic anhydride (AA) is the key chemical used as acetylation agent in producing the illegal drugs heroin and methaqualone. This study was directed towards quick detection and quantification of AA in air, using two fast and very sensitive analytical techniques: photoionization detection (PID) and ion mobility spectrometry (IMS). Results obtained indicated that both PID and IMS can sense AA at ultra-trace levels in air, but while PID produces a non-selective response, IMS offers richer information. Ion mobility spectrometric response in the positive ion mode presented one product ion, at reduced ion mobility K0 of 1.89 cm2 V-1 s-1 (almost overlapped with positive reactant ion peak), while in the negative ion mode two well separated product ions, with K0 of 1.90 and 1.71 cm2 V-1 s-1, were noticed. Our study showed that by using a portable, commercial IMS system (model Mini IMS, I.U.T. GmbH Berlin) AA can be easily measured at concentrations of 0.05 ppmv (0.2 mg m-3) in negative ion mode. Best selectivity and sensitivity of the IMS response were therefore achieved in the negative operation mode.

Uniform spheroid formation on a laboratory-made, low cell attachment surface consisting of a chitin sheet.

We utilized the reaction of chitosan with acetic anhydride to form a chitin gel. This gel was then dried, which formed a chitin sheet. The procedure was extremely easy for a biologist unfamiliar with materials engineering. Spheroids derived from HEK293T cells were formed on the chitin sheet, because the spheroids slightly attached and slowly moved on the chitin sheet.