Structure- and Cation-Dependent Mechanism of Interaction of Tricyclic Antidepressants with NMDA Receptor According to Molecular Modeling Data.

Some tricyclic antidepressants (TCAs), including amitriptyline (ATL), clomipramine (CLO), and desipramine (DES), are known to be effective for management of neuropathic pain. It was previously determined that ATL, CLO, and DES are capable of voltage-dependent blocking of NMDA receptors of glutamate (NMDAR), which play a key role in pathogenesis of neuropathic pain. Despite the similar structure of ATL, CLO, and DES, efficacy of their interaction with NMDAR varies significantly. In the study presented here, we applied molecular modeling methods to investigate the mechanism of binding of ATL, CLO, and DES to NMDAR and to identify structural features of the drugs that determine their inhibitory activity against NMDAR. Molecular docking of the studied TCAs into the NMDAR channel was performed. Conformational behavior of the obtained complexes in the lipid bilayer was simulated by the method of molecular dynamics (MD). A single binding site (upper) for the tertiary amines ATL and CLO and two binding sites (upper and lower) for the secondary amine DES were identified inside the NMDAR channel. The upper and lower binding sites are located along the channel axis at different distances from the extracellular side of the plasma membrane. MD simulation revealed that the position of DES in the lower site is stabilized only in the presence of sodium cation inside the NMDAR channel. DES binds more strongly to NMDAR compared to ATL and CLO due to simultaneous interaction of two hydrogen atoms of its cationic group with the asparagine residues of the ion pore of the receptor. This feature may be responsible for the stronger side effects of DES. It has been hypothesized that ATL binds to NMDAR less efficiently compared to DES and CLO due to its lower conformational mobility. The identified features of the structure- and cation-dependent mechanism of interaction between TCAs and NMDAR will help in the further development of effective and safe analgesic therapy.

Stir bar sorptive-dispersive microextraction by a poly(methacrylic acid-co-ethylene glycol dimethacrylate)-based magnetic sorbent for the determination of tricyclic antidepressants and their main active metabolites in human urine.

A poly(methacrylic acid-co-ethylene glycol dimethacrylate)-based magnetic sorbent was used for the rapid and sensitive determination of tricyclic antidepressants and their main active metabolites in human urine. This material was characterized by magnetism measurements, zeta potential, scanning electron microscopy, nitrogen adsorption-desorption isotherms, and thermogravimetric analysis. The proposed analytical method is based on stir bar sorptive-dispersive microextraction (SBSDME) followed by liquid chromatography-tandem mass spectrometry. The main parameters involved in the extraction step were optimized by using the response surface methodology as a multivariate optimization method, whereas a univariate approach was employed to study the desorption parameters. Under the optimized conditions, the proposed method was properly validated showing good linearity (at least up to 50 ng mL-1) and enrichment factors (13-22), limits of detection and quantification in the low ng L-1 range (1.4-7.0 ng L-1), and good intra- and inter-day repeatability (relative standard deviations below 15%). Matrix effects were observed for the direct analysis of urine samples, but they were negligible when a 1:1 v/v dilution with deionized water was performed. Finally, the method was successfully applied to human urine samples from three volunteers, one of them consuming a prescribed drug for depression that tested positive for clomipramine and its main active metabolite. Quantitative relative recoveries (80-113%) were obtained by external calibration. The present work expands the applicability of the SBSDME to new analytes and new types of magnetic sorbents.

Gelatin microsphere coated Fe3O4@graphene quantum dots nanoparticles as a novel magnetic sorbent for ultrasound-assisted dispersive magnetic solid-phase extraction of tricyclic antidepressants in biological samples.

Gelatin microsphere-coated Fe3O4@graphene quantum dots (Fe3O4@GQD@GM) were designed and synthesized as a novel sorbent via ultrasonic-assisted dispersive magnetic solid-phase extraction (UA-DMSPE) method. The synthesized sorbent was identified and confirmed by FT-IR, XRD, VSM, and SEM techniques. UA-DMSPE was combined with corona discharge ion mobility spectrometry for trace determination of desipramine, sertraline, and citalopram. Effective parameters were considered and optimized. The proposed method, under optimal conditions, showed excellent linearity in different concentration ranges (2-700 ng mL-1, R2 > 0.995), repeatability (RSD < 5.1%), good sensitivity (LODs in the range 0.6-1.5 ng mL-1), high preconcentration factor (PF = 207-218), and acceptable relative recoveries (93.5-101.8%). Eventually, this method was used to determine tricyclic antidepressants in various biological samples. Schematic presentation of the microextraction and monitoring of TCAs by ultrasonic-assisted dispersive magnetic solid phase microextraction-ion mobility spectrometry producer.

Development of a new method for drug detection based on a combination of the dried blood spot method and capillary electrophoresis.

The aim of this study was to develop a new approach to sample preparation of biological material based on a combination of the Dried Blood Spot (DBS) method and capillary electrophoresis coupled with mass spectrometry (CE-MS) for the analysis of blood samples collected in vivo or post-mortem. The proposed approach allowed the identification of typical drugs from different groups, such as tricyclic antidepressants (amitriptyline, imipramine), selective serotonin reuptake inhibitors (citalopram), benzodiazepines (tetrazepam) and hypnotics (zolpidem). In this study, a blood sample was spotted on FTA DMPK C cards, then dried, and 6-mm discs were cut out. The sample preparation procedure involved microwave-assisted extraction (MAE). Various extraction agents, temperatures and durations of extraction were examined in order to achieve the highest efficiency of the process. The method was subjected to a validation procedure. Limits of detection (LOD = 1.76 - 14.7 ng/mL) and quantification (LOQ = 5.25 - 49.0 ng/mL), inter- (CV = 1.31 - 9.43%) and intra- (CV = 3.26 - 18.52%) day precision of the determinations, recovery (RE = 85.0-105.4%) and matrix effect on ionization of analytes (ME = 98.6-105.5%) were determined. Furthermore, the developed DBS/MAE/CM-MS method was selective and analytes present in the blood applied on DBS cards were found to be stable after 7 and after 14 days. Moreover, the developed method was successfully applied to the analysis of both post-mortem samples and blood samples taken from patients treated with the analyzed drugs.

Elucidation of Degradation Behavior of Tricyclic Antidepressant Amoxapine in Artificial Gastric Juice.

The degradation behavior of eight tricyclic antidepressants (TCAs; amitriptyline, amoxapine (AMX), imipramine, clomipramine, desipramine, doxepin, dothiepin, and nortriptyline) in artificial gastric juice was investigated to estimate their pharmacokinetics in the stomach. As a result, among the eight TCAs, only AMX was degraded in artificial gastric juice. The degradation was a pseudo first-order reaction; activation energy (Ea) was 88.70 kJ/mol and activation entropy (ΔS) was -80.73 J/K·mol. On the other hand, the recovery experiment revealed that the degradation product did not revert to AMX and accordingly, this reaction was considered to be irreversible. In the AMX degradation experiment, peaks considered to be degradation products A (I) and B (II) were detected at retention times of around 3 min and 30 min in LC/UV measurements, respectively. Structural analysis revealed that compound (I) was [2-(2-aminophenoxy)-5-chlorophenyl]-piperazin-1-yl-methanone, a new compound, and compound (II) was 2-chlorodibenzo[b,f][1,4]oxazepin-11(10H)-one. As for the degradation behavior, it was estimated that AMX was degraded into (II) via (I), i.e., (II) was the final product. The results are expected to be useful in clinical chemistry and forensic science, including the estimation of drugs to be used at the time of judicial dissection and suspected drug addiction.

Synthesis, crystal structure and biological activity of novel analogues of tricyclic drugs.

A series of fourteen novel, eight-membered lactam- and dilactam-based analogues of tricyclic drugs were obtained in a simple one-pot procedure. Crystal structures of two compounds were determined by single-crystal X-ray diffraction analysis and their selected structural features were discussed and compared with those of imipramine and dibenzepine. Affinity of developed molecules for histamine receptor H1, serotonin receptors 5-HT1A, 5-HT2A, 5-HT6, 5-HT7, serotonin transporter (SERT) and dopamine receptor D2 was determined. The commercial drug dibenzepine was also checked on these molecular targets, as its mechanism of action is largely unknown. Two derivatives of 11,12-dihydrodibenzo[b,f]azocin-6(5H)-one (7,8) and two of dibenzo[b,f]azocin-6(5H)-one (9,10) were found to be active toward the H1 receptor in sub-micromolar concentrations.

ß-Cyclodextrin encapsulation of nortriptyline HCl and amitriptyline HCl: Molecular insights from single-crystal X-ray diffraction and DFT calculation.

The ß-CD encapsulation of two tricyclic antidepressants (TCAs), nortriptyline (NRT) HCl and amitriptyline (AMT) HCl (most widely used TCA), has been thoroughly investigated by single-crystal X-ray diffraction and DFT calculation for insights into the inclusion complexation. X-ray analysis reveals that both drugs insert the A-ring moiety vertically from the ß-CD O2H/O3H-side and are kept in position by C5H⋯π interactions, yielding thermodynamically favorable complexes. In the ß-CD cavity, NRT and AMT are less open as their butterfly angles are ~10° smaller than those in free HCl salt forms and in complex with proteins. The effect of HCl salt on both complexes is evaluated by DFT full-geometry optimization. When Cl- is directly linked with the NRT NH2Me+ group, the inclusion complex formed gains stability by 3.65 kcal mol-1 through N5'H⋯Cl⋯HO26 H-bond chain, compared to the complex of NRT base. The addition of HCl to N5' of the side chain marginally affects the structures of ß-CD-TCA complexes. This study provides a rigorous crystallographic evidence for the ß-CD-TCA complexation and a theoretical view on the improved stability of TCA in the CD cavity, supporting the pharmacological benefit of CD encapsulation in reducing the TCA side effects.

A New Methodology to Create Polymeric Nanocarriers Containing Hydrophilic Low Molecular-Weight Drugs: A Green Strategy Providing a Very High Drug Loading.

To date, a large number of active molecules are hydrophilic and aromatic low molecular-weight drugs (HALMD). Unfortunately, the low capacity of these molecules to interact with excipients and the fast release when a formulation containing them is exposed to biological media jeopardize the elaboration of drug delivery systems by using noncovalent interactions. In this work, a new, green, and highly efficient methodology to noncovalently attach HALMD to hydrophilic aromatic polymers to create nanocarriers is presented. The proposed method is simple and consists in mixing an aqueous solution containing HALMD (model drugs: imipramine, amitriptyline, or cyclobenzaprine) with another aqueous solution containing the aromatic polymer [model polymer: poly(sodium 4-styrenesulfonate) (PSS)]. NMR experiments demonstrate strong chemical shifting of HALMD aromatic rings when interacting with PSS, evidencing aromatic-aromatic interactions. Ion pair formation and aggregation produce the collapse of the system in the form of nanoparticles. The obtained nanocarriers are spheroidal, their size ranging between 120 and 170 nm, and possess low polydispersity (≤0.2) and negative zeta potential (from -60 to -80 mV); conversely, the absence of the aromatic group in the polymer does not allow the formation of nanostructures. Importantly, in addition to high drug association efficiencies (≥90%), the formed nanocarriers show drug loading values never evidenced for other systems comprising HALMD, reaching ≈50%. Diafiltration and stopped flow experiments evidenced kinetic drug entrapment governed by molecular rearrangements. Importantly, the nanocarriers are stable in suspension for at least 18 days and are also stable when exposed to different high ionic strength, pH, and temperature values. Finally, they are transformable to a reconstitutable dry powder without losing their original characteristics. Considering the large quantity of HALMD with importance in therapeutics and the simplicity of the presented strategy, we envisage these results as the basis to elaborate a number of drug delivery systems with applications in different pathologies.

Solubility-pH profile of desipramine hydrochloride in saline phosphate buffer: Enhanced solubility due to drug-buffer aggregates.

Although solubility-pH data for desipramine hydrochloride (DsHCl) have been reported previously, the aim of the present study was to critically examine the aqueous solubility-pH behavior of DsHCl in buffer-free and buffered solutions, in the presence of physiologically-relevant chloride concentration, using experimental practices recommended in the recently-published "white paper" (Avdeef et al., 2016). The computer program pDISOL-X was used to design the structured experiments (pH-RSF method), to process the data, and to refine the equilibrium constants. Low-to-high and high-to-low pH assays (using HCl, H3PO4, or NaOH to adjust pH) were performed on phosphate-buffered (0.12­0.15 M) saturated solutions of DsHCl in the pH 1.3-11.6 range. After equilibration (stirring 6 h, followed by 18 h stir-free sedimentation), filtration or centrifugation was used for phase separation. Concentration was measured using HPLC with UV/VIS detection. The 2:1 drug-phosphate solubility product (Ksp2:1 = [DsH+]2[HPO42-]) was determined from data in the pH 4-9 region. The free base of desipramine was prepared and used to determine the Ksp1:1 ([DsH+][H2PO4-]) in chloride-free acidified suspension. In addition, phosphate-free titrations were conducted to determine the intrinsic solubility, S0, and the 1:1 drug-chloride solubility product, KspDsHCl = [DsH+][Cl-]. Under the assay conditions, only the phosphate-free solutions showed some supersaturation near pHmax 8.0. In phosphate-containing solutions, pHmax was indicated at higher pH (8.8-9.6). Oils mixed with solids were observed to form in alkaline solutions (pH > 11). Notably, soluble drug-phosphate complexes appeared to form below pH 3.9 and above pHmax in saturated phosphate­containing saline solutions. This was indicated by the systematic pH shift to higher values in the log S-pH curve in alkaline solution than expected from the Henderson-Hasselbalch equation. For pH < 3.9, saturated phosphate-containing saline solutions exhibited elevated solubility, with drug-hydrochloride as the sole precipitate. Salt solubility products, intrinsic solubility, and complexation constants, which rationalized the data, were determined. Elemental, thermogravimetric (TGA), differential scanning calorimetric (DSC), and powder X-ray diffraction (PXRD) analyses were used to characterize the precipitates isolated from suspensions at different pH.

Tricyclic Antidepressants and Monoamine Oxidase Inhibitors: Are They Too Old for a New Look?

Through unintentional discovery, monoamine oxidase inhibitors (MAOIs) and tricyclic antidepressants (TCAs) were the first antidepressant classes to be used clinically and have been widely available for over half a century. From the 1950s to the 1980s, these two classes of antidepressants were the sole antidepressant tools available to psychiatrists. With the advent of the selective serotonin reuptake inhibitors (SSRIs) in the 1980s and 1990s, the prescribing of the MAOIs and TCAs has fallen significantly worldwide. In this chapter, we take a closer look at the arc of MAOI discovery and clinical use, and how these two classes of drugs compare to each other. This is important because relatively few studies compare these older classes of drugs to the newer classes of antidepressants. Finally, we argue that TCAs, and particularly MAOIs, should continue to play an important role in the modern treatment of depression, especially in the treatment-resistant patient.

Tricyclic amine antidepressants suppress ß-lactam resistance in methicillin-resistant Staphylococcus aureus (MRSA) by repressing mRNA levels of key resistance genes.

Methicillin-resistant Staphylococcus aureus (MRSA) is the leading cause of recurrent infections in humans including endocarditis, pneumonia, and toxic shock syndrome. Novel therapeutics to treat MRSA and other resistant bacteria are urgently needed. Adjuvant therapy, which uses a non-toxic compound to repotentiate the toxic effects of an existing antibiotic, is an attractive response to the growing resistance crisis. Herein, we describe the evaluation of structurally related, FDA-approved tricyclic amine antidepressants that selectively repotentiate MRSA to ß-lactam antibiotics. Our results identify important structural features of the tricyclic amine class for ß-lactam adjuvant activity. Furthermore, we describe the mechanism of action for our lead compound, amoxapine, and illustrate that it represses the mRNA levels of key ß-lactam resistance genes in response to ß-lactam treatment. This work is novel in that it highlights an important class of small molecules with the ability to simultaneously inhibit production of both ß-lactamase and penicillin binding protein 2a.

Molecular determinants of Kv7.1/KCNE1 channel inhibition by amitriptyline.

Amitriptyline (AMIT) is a compound widely prescribed for psychiatric and non-psychiatric conditions including depression, migraine, chronic pain, and anorexia. However, AMIT has been associated with risks of cardiac arrhythmia and sudden death since it can induce prolongation of the QT interval on the surface electrocardiogram and torsade de pointes ventricular arrhythmia. These complications have been attributed to the inhibition of the rapid delayed rectifier potassium current (IKr). The slow delayed rectifier potassium current (IKs) is the main repolarizing cardiac current when IKr is compromised and it has an important role in cardiac repolarization at fast heart rates induced by an elevated sympathetic tone. Therefore, we sought to characterize the effects of AMIT on Kv7.1/KCNE1 and homomeric Kv7.1 channels expressed in HEK-293H cells. Homomeric Kv7.1 and Kv7.1/KCNE1 channels were inhibited by AMIT in a concentration-dependent manner with IC50 values of 8.8 ±â€¯2.1 µM and 2.5 ±â€¯0.8 µM, respectively. This effect was voltage-independent for both homomeric Kv7.1 and Kv7.1/KCNE1 channels. Moreover, mutation of residues located on the P-loop and S6 domain along with molecular docking, suggest that T312, I337 and F340 are the most important molecular determinants for AMIT-Kv7.1 channel interaction. Our experimental findings and modeling suggest that AMIT preferentially blocks the open state of Kv7.1/KCNE1 channels by interacting with specific residues that were previously reported to be important for binding of other compounds, such as chromanol 293B and the benzodiazepine L7.

Efficient degradation of imipramine by iron oxychloride-activated peroxymonosulfate process.

Synthesized iron oxychloride (FeOCl) was firstly applied to activate peroxymonosulfate (PMS) to degrade imipramine (IMI), a tricyclic antidepressant. Compared to some other Fe-based materials including zero valent iron, Fe2O3, Fe3O4 and ferric ions, FeOCl presented an impressive catalytic activity on PMS at near-neutral condition due to its unique structure containing abundant unsaturated iron atoms and oxo-bridged configuration. With an increase of FeOCl dose, PMS dose or initial pH in ranges of 0.02 - 0.5 g/L, 0.1 - 2.5 mM and 4.0 - 8.0, the degradation efficiency of IMI was effectively raised by 64.0%, 48.5% and 50.6%, respectively. The presence of either bicarbonate or chloride stimulated the removal of IMI. Moreover, 70.4% of IMI was degraded under the background of real water with 2 mM PMS. The possible reactive species were identified as sulfate and hydroxyl radicals. The formed hypochlorite through the reaction of PMS and the released chloride ions may also contribute to the degradation of IMI. Among the oxidants, sulfate radical was proven to be the dominate one in the system. Additionally, the FeOCl/PMS system can overall effectively degrade six other organic compounds including amitriptyline, desipramine, propranolol, nitrobenzene, methyl-paraben and ethyl-paraben, further suggesting the possible application of this system in treatment of vast aquatic micro-organic pollutants.

Mirtazapine.

Mirtazapine is one of antidepression which is used mainly in the treatment of depression, moreover, it is sometimes used in the treatment of anxiety disorders, insomnia, nausea, and vomiting, and to produce weight gain when desirable. The action of mirtazapine is an antagonist of certain adrenergic and serotonin receptors, and, furthermore, the drug is used strong as antihistamine, and it is occasionally defined as a noradrenergic and specific serotonergic antidepressant (NaSSA). The comprehensive profile of mirtazapine gives more detailed information about nomenclature, formulae, elemental analysis, and appearance. In addition, the numerous methods of drug synthesis are summarized. Also the profile covers the physicochemical properties as: the value of pKa, drug solubility, melting point, X-ray powder diffraction, and analysis methods for example: (compendial, electrochemical, spectroscopic, and method of chromatographic). Besides that, the profile covered pharmacological profile and clinical pharmacokinetics in subtitle's (absorption, distribution, metabolism, and elimination). About 100 references were given as a proof of the above-mentioned studies.

Development of new extraction method based on liquid-liquid-liquid extraction followed by dispersive liquid-liquid microextraction for extraction of three tricyclic antidepressants in plasma samples.

In the present study, a new extraction method based on a three-phase system, liquid-liquid-liquid extraction, followed by dispersive liquid-liquid microextraction has been developed and validated for the extraction and preconcentration of three commonly prescribed tricyclic antidepressant drugs - amitriptyline, imipramine, and clomipramine - in human plasma prior to their analysis by gas chromatography-flame ionization detection. The three phases were an aqueous phase (plasma), acetonitrile and n-hexane. The extraction mechanism was based on the different affinities of components of the biological sample (lipids, fatty acids, pharmaceuticals, inorganic ions, etc.) toward each of the phases. This provided high selectivity toward the analytes since most interferences were transferred into n-hexane. In this procedure, a homogeneous solution of the aqueous phase (plasma) and acetonitrile (water-soluble extraction solvent) was broken by adding sodium sulfate (as a phase separating agent) and the analytes were extracted into the fine droplets of the formed acetonitrile. Next, acetonitrile phase was mixed with 1,2-dibromoethane (as a preconcentration solvent at microliter level) and then the microextraction procedure mentioned above was performed for further enrichment of the analytes. Under the optimum extraction conditions, limits of detection and lower limits of quantification for the analytes were obtained in the ranges of 0.001-0.003 and 0.003-0.010 µg mL-1 , respectively. The obtained extraction recoveries were in the range of 79-98%. Intra- and inter-day precisions were < 7.5%. The validated method was successfully applied for determination of the selected drugs in human plasma samples obtained from the patients who received them.

Clouding phenomenon in amphiphilic systems: A review of five decades.

Phase separation in amphiphilic systems is an important phenomenon. The temperature at which an amphiphilic solution phase separates is known as Cloud Point (CP). This article reviews in detail the process of phase separation in various amphiphiles (surfactants, polymers and drugs) and effect of different classes of additives on the CP of these amphiphilic systems. Ions affect the CP of drugs in a different way: kosmotropes and hard bases decrease while chaotropes and soft bases increase the CP of nonionic and cationic surfactants. Anionic surfactants show CP in presence of quaternary salts only. Thus, depending upon the nature and concentration of additive, the CP of an amphiphilic system gets increased or decreased and, hence, properties of the system may be tuned as per the need and use. A system with CP at high concentration can be made to phase separate at lower concentration by simply introducing an appropriate additive in it. This makes the system cost effective. On the other hand, if not required, a low CP can be enhanced with the help of another type of a suitable additive.

Development and evaluation of orally disintegrating tablets comprising taste-masked mirtazapine granules.

INTRODUCTION: Orally disintegrating tablets (ODTs) provide an important treatment option for pediatric, geriatric and psychiatric patients. In our previous study, we have performed the initial studies for the formulation development and characterization of new ODT formulations containing a bitter taste drug, mirtazapine, coated with 6% (w/w) Eudragit® E-100 (first group of formulations, FGF) without taste evaluation. In present study, coating ratio of the drug was increased to 8% (w/w) (second group of formulations, SGF) to examine the effect of increased coating ratio of drug on in vitro characterization of the formulations including in vitro taste masking study. MATERIALS AND METHODS: Coacervation technique using Eudragit® E-100 was employed to obtain taste-masked mirtazapine granules. FGF and SGF were compared to original product (Remeron SolTab, an antidepressant drug which produced by pellet technology) in terms of in vitro permeability, in vitro taste masking efficiency which was performed by dissolution studies in salivary medium and dissolution stability. Also, the other tablet characteristics (such as diameter, thickness) of SGF were examined. RESULTS AND DISCUSSION: The disintegration time of the SGF were found as A1 < A2 < A3 < A5 < A4 (8% Eudragit® E-100), but all of the formulations dissolved under 30 seconds and friability values were less than 1%. In vitro taste masking efficiency studies demonstrated that C2 formulation (in FGF) had the most similar dissolution profile to Remeron SolTab. CONCLUSIONS: According to these findings, B2 or C2 (with citric acid or sodium bicarbonate, respectively, with 6% Eudragit® E-100) formulations could be promising alternatives to Remeron SolTab.

Suitability of 1-hexyl-3-methylimidazolium ionic liquids for the analysis of pharmaceutical formulations containing tricyclic antidepressants.

The reversed-phase chromatographic behaviour of six tricyclic antidepressants (amitryptiline, clomipramine, doxepin, imipramine, nortryptiline and maprotiline) was examined in this work with acetonitrile-water mobile phases, in the absence and presence of the ionic liquids 1-hexyl-3-methylimidazolium chloride and 1-hexyl-3-methylimidazolium tetrafluoroborate, which have interesting features for the separation of basic compounds, in terms of peak shape combined with reduced retention. Tricyclic antidepressants are low polarity drugs that strongly associate to the alkyl chains of conventional stationary phases. They are also positively charged in the usual working pH range (2-8) in reversed-phase liquid chromatography, due to their strong basic character. In consequence, they may interact with the residual ionised silanols present in conventional silica-based stationary phases, which is translated in stronger retention, and tailed and broad peaks. A simple chromatographic procedure for the control of tricyclic antidepressants in pharmaceutical formulations was developed using a C8 column and a mobile phase containing 30% acetonitrile/10 mM 1-hexyl-3-methylimidazolium chloride at pH 3, with UV detection. Intra- and inter-day precisions were usually below +1.0%, and intra- and inter-day bias (trueness) ranged between ‒2.1% and +2.4%, and between ‒3.0% and +2.3%, respectively. Sample preparation was simple and only required solubilisation and filtration previous to injection.

New insights into the intracellular distribution pattern of cationic amphiphilic drugs.

Cationic amphiphilic drugs (CADs) comprise a wide variety of different substance classes such as antidepressants, antipsychotics, and antiarrhythmics. It is well recognized that CADs accumulate in certain intracellular compartments leading to specific morphological changes of cells. So far, no adequate technique exists allowing for ultrastructural analysis of CAD in intact cells. Azidobupramine, a recently described multifunctional antidepressant analogue, allows for the first time to perform high-resolution studies of CADs on distribution pattern and morphological changes in intact cells. We showed here that the intracellular distribution pattern of azidobupramine strongly depends on drug concentration and exposure time. The mitochondrial compartment (mDsRed) and the late endo-lysosomal compartment (CD63-GFP) were the preferred localization sites at low to intermediate concentrations (i.e. 1 µM, 5 µM). In contrast, the autophagosomal compartment (LC3-GFP) can only be reached at high concentrations (10 µM) and long exposure times (72 hrs). At the morphological level, LC3-clustering became only prominent at high concentrations (10 µM), while changes in CD63 pattern already occurred at intermediate concentrations (5 µM). To our knowledge, this is the first study that establishes a link between intracellular CAD distribution pattern and morphological changes. Therewith, our results allow for gaining deeper understanding of intracellular effects of CADs.

Exploring the structure-permeation relationship of topical tricyclic antidepressants used for skin analgesia.

The purpose of this study was to evaluate the skin permeation of tricyclic antidepressants (TCAs) with propamine moiety to select candidates for the development of topical analgesics to treat cutaneous pain. We sought to establish the structure-permeation relationship (SPR) of topical TCAs. The lipophilicity, melting point, and aqueous solubility were determined to develop the physicochemical characterization. The TCA permeation into pig and nude mouse skins was estimated using Franz diffusion cell. TCAs and lidocaine were comparatively examined for cutaneous analgesia by pinprick assay. Cutaneous tolerance to TCAs was assessed using nude mouse skin. The skin deposition increased following the increase of lipophilicity after excluding the effect of solubility, with clomipramine exhibiting the highest skin retention. A contrary result was observed for TCA penetration into the receptor. Of the permeants tested, clomipramine demonstrated the best skin-targeting ability. Nortriptyline and clomipramine demonstrated selective uptake into the hair follicles, exhibiting a 2.5-fold higher follicular accumulation than desipramine. Replacement of nitrogen with carbon in the seven-member ring increased skin absorption. The tertiary amine TCAs demonstrated higher absorption than the secondary amine TCAs. The position of the double bond also affected skin transport. Topical clomipramine had a longer duration of analgesic action than lidocaine (240min versus 60min). Exploring the SPR revealed that clomipramine could be an analgesic candidate drug for future development.