Photosensitive Polymeric Janus Micromotor for Enzymatic Activity Protection and Enhanced Substrate Degradation.

Immobilizing enzymes into microcarriers is a strategy to improve their long-term stability and reusability, hindered by (UV) light irradiation. However, in such approaches, enzyme-substrate interaction is mediated by diffusion, often at slow kinetics. In contrast, enzyme-linked self-propelled motors can accelerate this interaction, frequently mediated by the convection mechanism. This work reports on a new photosensitive polymeric Janus micromotor (JM) for UV-light protection of enzymatic activity and efficient degradation of substrates accelerated by the JMs. The JMs were assembled with UV-photosensitive modified chitosan, co-encapsulating fluorescent-labeled proteins and enzymes as models and magnetite and platinum nanoparticles for magnetic and catalytic motion. The JMs absorbed UV light, protecting the enzymatic activity and accelerating the enzyme-substrate degradation by magnetic/catalytic motion. Immobilizing proteins in photosensitive JMs is a promising strategy to improve the enzyme's stability and hasten the kinetics of substrate degradation, thereby enhancing the enzymatic process's efficiency.

Upconversion-nanoparticle-functionalized Janus micromotors for efficient detection of uric acid.

We report enzyme-powered upconversion-nanoparticle-functionalized Janus micromotors, which are prepared by immobilizing uricase asymmetrically onto the surface of silicon particles, to actively and rapidly detect uric acid. The asymmetric distribution of uricase on silicon particles allows the Janus micromotors to display efficient motion in urine under the propulsion of biocatalytic decomposition of uric acid and simultaneously detect uric acid based on the luminescence quenching effect of the UCNPs modified on the other side of SiO2. The efficient motion of the motors greatly enhances the interaction between UCNPs and the quenching substrate and improves the uric acid detection efficiency. Overall, such a platform using uric acid simultaneously as the detected substrate and motion fuel offers considerable promise for developing multifunctional micro/nanomotors for a variety of bioassay and biomedical applications.

A sandwich-type electrochemical immunosensor based on Au-rGO composite for CA15-3 tumor marker detection.

A sensitive detection of carbohydrate antigen 15-3 (CA15-3) levels may allow for early diagnosis and monitoring the treatment of breast cancer, but this can only be made in routine clinical practice if low-cost immunosensors are available. In this work, we developed a sandwich-type electrochemical immunosensor capable of rapid detection of CA15-3 with an ultra-low limit of detection (LOD) of 0.08 fg mL-1 within a wide linear concentration range from 0.1 fg mL-1 to 1 µg mL-1. The immunosensor had a matrix of a layer-by-layer film of Au nanoparticles and reduced graphene oxide (Au-rGO) co-electrodeposited on screen-printed carbon electrodes (SPCE). The high sensitivity was achieved by using secondary antibodies (Ab2) labeled with horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H2O2) as signal amplifiers, and hydroquinone (HQ) was used as an electron mediator. The immunosensor was selective for CA15-3 in human serum and artificial saliva samples, robust, and stable to permit storage at 4 °C for more than 30 days. With its high performance, the immunosensor may be incorporated into future point-of-care (POC) devices to determine CA15-3 in distinct biological fluids, including in blood and saliva samples.

A versatile and ultrasensitive molecularly imprinted electrochemiluminescence sensor with HRP-encapsulated liposome labeled by light-triggered click reaction for pesticide residues.

A novel approach for trace detection of fipronil with a molecularly imprinted electrochemiluminescence sensor (MIECLS) is proposed. The sensitivity is significantly improved via signal amplification of the enzymatic reaction of horseradish peroxidase (HRP) released from encapsulated liposomes which linked onto the template molecules after rebinding. The molecularly imprinted polymer membrane was prepared through the electropolymerization of monomers with fipronil as a template. After the elution of the template molecules, the analyte fipronil was reabsorbed into the cavities. HRP-encapsulated liposomes were linked to the target molecules by light-triggered click reaction. The higher the concentration of the target was, the more HRP-encapsulated liposomes were present on the molecularly imprinted polymer (MIP) sensor. Then, HRP was liberated from liposomes, and the catalytic degradation of hydrogen peroxide (H2O2) by HRP occurs, which changed the electrochemiluminescence intensity of luminol significantly. The change of the ∆ECL intensity was linearly proportional to the logarithm of the fipronil concentration ranging from 1.00 × 10-14 to 1.00 × 10-9 mol/L, and the detection limit was 7.77 × 10-16 mol/L. The recoveries obtained ranged from 95.7 to 105.8% with RSD < 5%. The sensitivity of the detection was significantly improved, and the analysis process was simplified in that the incubation step required in the conventional method was avoided. The sensor proposed provides a feasible platform for ultra-trace amount determination.

Carboxylic acid-tethered polyaniline as a generic immobilization matrix for electrochemical bioassays.

Polyaniline (PANI) was functionalized by thiol-ene click chemistry to obtain carboxylic acid-tethered polyaniline (PCOOH). The versatility of PCOOH as an immobilization matrix was demonstrated by constructing four different biosensors for detection of metabolites and cancer biomarker. Immobilization efficiency of PCOOH was investigated by surface plasmon resonance and fluorescence microscopic analysis which revealed dense immobilization of biomolecules on PCOOH as compared to conventional PANI. A sandwich electrochemical biosensor was constructed using PCOOH for detection of liver cancer biomarker, α-fetoprotein (AFP). The sensor displayed sensitivity of 15.24 µA (ng mL-1)-1 cm-2, with good specificity, reproducibility (RSD 3.4%), wide linear range (0.25-40 ng mL-1) at - 0.1 V (vs. Ag/AgCl), and a low detection limit of 2 pg mL-1. The sensor was validated by estimating AFP in human blood serum samples where the AFP concentrations obtained are consistent with the values estimated using ELISA. Furthermore, utilization of PCOOH for construction of enzymatic biosensor was demonstrated by covalent immobilization of glucose oxidase, uricase, and horseradish peroxidase (HRP) for detection of glucose, uric acid, and H2O2, respectively. The biosensors displayed reasonable sensitivity (50, 148, 127 µA mM-1 cm-2), and linear ranges (0.1-5, 0.1-6, 0.1-7 mM) with a detection limit of 10, 1, and 8 µM for glucose, uric acid, and H2O2, respectively. The present study demonstrates the capability of PCOOH to support and enable oxidation of H2O2 generated by oxidase enzymes as well as HRP enzyme catalyzed reduction of H2O2. Thus, PCOOH offers a great promise as an immobilization matrix for development of high-performance biosensors to quantify a variety of other disease biomarkers. Carboxylic acid-tethered polyaniline synthesized by thiol-ene click chemistry was used as matrix to construct four different electrochemical biosensors for detection of cancer biomarker α-fetoprotein, glucose, uric acid, and H2O2.

Fully integrated sampler and dilutor in an electrochemical paper-based device for glucose sensing.

An electroanalytical platform capable to take and dilute the sample has been designed in order to fully integrate the different steps of the analytical process in only one device. The concept is based on the addition of glass-fiber pads for sampling and diluting to an electrochemical cell combining a paper-based working electrode with low-cost connector headers as counter and reference electrodes. In order to demonstrate the feasibility of this all-in-one platform for biosensing applications, an enzymatic sensor for glucose determination (requiring a potential as low as -0.1 V vs. gold-plated wire by using ferrocyanide as mediator) was developed. Real food samples, such as cola beverages and orange juice, have been analyzed with the bioelectroanalytical lab-on-paper platform. As a proof-of-concept, and trying to go further in the integration of steps, sucrose was successfully detected by depositing invertase in the sampling strip. This enzyme hydrolyzes sucrose into fructose and glucose, which was determined using the enzymatic biosensor. This approach opens the pathway for the development of devices applying the lab-on-paper concept, saving costs and time, and making possible to perform decentralized analysis with high accuracy.

TiO2 Nanotubes Alginate Hydrogel Scaffold for Rapid Sensing of Sweat Biomarkers: Lactate and Glucose.

Versatile sensing matrixes are essential for the development of enzyme-immobilized optical biosensors. A novel three-dimensional titanium dioxide nanotubes/alginate hydrogel scaffold is proposed for the detection of sweat biomarkers, lactate, and glucose in artificial sweat. Hydrothermally synthesized titanium dioxide nanotubes were introduced to the alginate polymeric matrix, followed by cross-linking nanocomposite with dicationic calcium ions to fabricate the scaffold platform. Rapid colorimetric detection (blue color optical signal) was carried out for both lactate and glucose biomarkers in artificial sweat at 4 and 6 min, respectively. The superhydrophilicity and the capillarity of the synthesized titanium dioxide nanotubes, when incorporated into the alginate matrix, facilitate the rapid transfer of the artificial sweat components throughout the sensor scaffold, decreasing the detection times. Moreover, the scaffold was integrated on a cellulose paper to demonstrate the adaptability of the material to other matrixes, obtaining fast and homogeneous colorimetric detection of lactate and glucose in the paper substrate when image analysis was performed. The properties of this new composite provide new avenues in the development of paper-based sensor devices. The biocompatibility, the efficient immobilization of biological enzymes/colorimetric assays, and the quick optical signal readout behavior of the titanium dioxide nanotubes/alginate hydrogel scaffolds provide a prospective opportunity for integration into wearable devices.

End-labeling-based electrochemical strategy for detection of adenine methylation in nucleic acid by differential pulse voltammetry.

A promising electrochemical strategy for assay of N6-methyladenosine (m6A)/N6-methyladenine (6mA) in RNA/DNA is proposed. The key of this strategy is the end-labeling of nucleic acid, which makes it possible to detect methylation level in unknown sequence. Firstly, the end of m6A-RNA or 6mA-DNA was labeled with sulfhydryl group through T4 polynucleotide kinase (T4 PNK) and then directly assembled on a gold nanoparticle-modified glassy carbon electrode (AuNPs/GCE). Secondly, methylation sites in RNA/DNA were specifically recognized by anti-m6A-antibody, and then, horseradish peroxidase-labeled goat anti-rabbit IgG (HRP-IgG) was further conjugated on the antibody. Thirdly, HRP-IgG catalyzed the hydroquinone oxidation reaction to generate amplified current signal which correlates with the amount of m6A/6mA in nucleic acid. This method showed a wide linear range from 0.0001 to 10 nM for m6A-RNA, 0.001 to 100 nM for 6mA-dsDNA, and 0.0001 to 10 nM for 6mA-ssDNA. The method was successfully applied to detection of m6A/6mA in RNA/DNA from HeLa cells and E. coli cells and validation of the decrease of m6A-RNA in HeLa cells after treatment with FTO protein.

Immobilizing Enzymes on Noble Metal Hydrogel Nanozymes with Synergistically Enhanced Peroxidase Activity for Ultrasensitive Immunoassays by Cascade Signal Amplification.

Enzyme immobilization plays an essential role in solving the problems of the inherently fragile nature of enzymes. Although prominent stability and reuse of enzymes can be achieved by enzyme immobilization, their bioactivity and catalytic efficiency will be adversely affected. Herein, PdCu hydrogel nanozymes with a hierarchically porous structure were used to immobilize horseradish peroxidase (HRP) to obtain PdCu@HRP. In addition to the improvement of stability and reusability, PdCu@HRP displayed synergistically enhanced activities than native HRP and PdCu hydrogels. Not only the specific interactions between PdCu hydrogel nanozymes and enzymes but also the enrichment of substrates around enzymes by electrostatic adsorption of hydrogels was proposed to expound the enhanced catalytic activity. Accordingly, by taking advantage of the excellent catalytic performance of the PdCu@HRP and the glucose oxidase encapsulated in zeolitic imidazolate framework-8, colorimetric biosensing of the carcinoembryonic antigen via catalytic cascade reactions for achieving signal amplification was performed. The obtained biosensor enhanced the detection sensitivity by approximately 6.1-fold as compared to the conventional HRP-based enzyme-linked immunosorbent assay, demonstrating the promising potential in clinical diagnosis.

3D Magnetic Field-Controlled Synthesis, Collective Motion, and Bioreaction Enhancement of Multifunctional Peasecod-like Nanochains.

Magnetic field-induced synthesis and biocatalysis of magnetic materials have inspired great interest due to the flexible controllability of morphologies and unique magnetoelectrical properties. However, the interaction of the magnetic field and the reaction kinetics during the synthesis of magnetic nanochains has not been revealed. The collective motions in fluids and the multifunctional enhancements for bioreaction of 3D magnetic-controlled nanochains have not been systematically researched. Here, an integrated 3D magnetic control method was reported for the synthesis, collective motion, and multifunctional bioreaction enhancement of peasecod-like nanochains. The interactions of magnetic field and reaction kinetics were rationally controlled to synthesize magnetic nanochains of different morphologies. Collective motions of nanochains under alternating magnetic fields were studied to provide insights into the disturbance on confined fluids. Three mechanisms of reaction enhancement of nanostir, magnetic agent, and nanocatalyst were achieved simultaneously via 3D magnetic-controlled nanochains using a glucose oxidase-horseradish peroxidase multi-enzyme system. The peasecod-like nanochain also exhibited excellent reaction enhancement in cell-free protein synthesis reaction, which is desired for effective high-throughput screening. The integrated 3D magnetic control method through the whole process from fabrication to applications of magnetic nanomaterials could be extended to multifunctional biocatalysis and multi-task biomedicine.

Rationally engineered high-performance BiVO4/Ag3VO4/SnS2 photoelectrodes for ultrasensitive immunosensing of CYFRA21-1 based on HRP-tyramine-triggered insoluble precipitates.

A photoelectrochemical (PEC) biosensor capable of detecting cytokeratin 19 fragment 21-1 (CYFRA21-1) was optimized by taking advantage of the powerful conjugate repeats of horseradish peroxidase and tyramine (HRP-tyramine)-triggered enzymatic biocatalytic precipitation (BCP) on high-performance BiVO4/Ag3VO4/SnS2 photoelectrodes. Compared with the ubiquitous BCP strategy, we identified a design supporting conjugate repeats generated by HRP and tyramine-triggered immeasurable insoluble precipitates in the presence of hydrogen peroxide and 4-chloro-1-phenol (4-CN), and the steric hindrance improved sensitivity. Moreover, by virtue of BiVO4, Ag3VO4, SnS2 excellent level matching structure and chemical stability, a heterojunction (BiVO4/Ag3VO4/SnS2) with high light absorption efficiency has been successfully prepared. The novel heterostructure system of BiVO4/Ag3VO4/SnS2 with high detection current and low background signal exhibited high-performance PEC determination. Generally, the hitherto untapped biosensor resource realized the sensitive detection of CYFRA21-1 with a wide linear range from 50 fg/mL to 200 ng/mL, and a detection limit of 15 fg/mL, which illustrated the potential for biotechnological applications.

Hierarchically Porous Biocatalytic MOF Microreactor as a Versatile Platform towards Enhanced Multienzyme and Cofactor-Dependent Biocatalysis.

Metal-organic frameworks (MOFs) have recently emerged as excellent hosting matrices for enzyme immobilization, offering superior physical and chemical protection for biocatalytic reactions. However, for multienzyme and cofactor-dependent biocatalysis, the subtle orchestration of enzymes and cofactors is largely disrupted upon immobilizing in the rigid crystalline MOF network, which leads to a much reduced biocatalytic efficiency. Herein, we constructed hierarchically porous MOFs by controlled structural etching to enhance multienzyme and cofactor-dependent enzyme biocatalysis. The expanded size of the pores can provide sufficient space for accommodated enzymes to reorientate and spread within MOFs in their lower surface energy state as well as to decrease the inherent barriers to accelerate the diffusion rate of reactants and intermediates. Moreover, the developed hierarchically porous MOFs demonstrated outstanding tolerance to inhospitable surroundings and recyclability.

Detection of the SARS-CoV-2 humanized antibody with paper-based ELISA.

This work reports the development of a rapid, simple and inexpensive colorimetric paper-based assay for the detection of the severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper device was prepared with lamination for easy sample handling and coated with the recombinant SARS-CoV-2 nucleocapsid antigen. This assay employed a colorimetric reaction, which is followed by horseradish peroxidase (HRP) conjugated detecting antibody in the presence of the 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The colorimetric readout was evaluated and quantified for specificity and sensitivity. The characterization of this assay includes determining the linear regression curve, the limit of detection (LOD), the repeatability, and testing complex biological samples. We found that the LOD of the assay was 9.00 ng µL-1 (0.112 IU mL-1). The relative standard deviation was approximately 10% for a sample number of n = 3. We believe that our proof-of-concept assay has the potential to be developed for clinical screening of the SARS-CoV-2 humanized antibody as a tool to confirm infected active cases or to confirm SARS-CoV-2 immune cases during the process of vaccine development.

A sandwich electrochemiluminescent assay for determination of concanavalin A with triple signal amplification based on MoS2NF@MWCNTs modified electrode and Zn-MOF encapsulated luminol.

An ultrasensitive sandwich electrochemiluminescence (ECL) biosensor was designed for determination of concanavalin A (ConA) through the specific carbohydrate-ConA interactions. Three-dimensional porous metal-organic framework (Zn-MOF) was synthesized, which loaded a large amount of luminescent reagents as luminol by encapsulating into its pores to form Zn-MOF@luminol complex. Interestingly, Zn-MOF also acted as the coreactant accelerator in the luminol-H2O2 ECL system. This Zn-MOF@luminol complex was used as the signal probe to achieve a super strong and stable ECL signal. In addition, three-dimensional hierarchical molybdenum disulfide nanoflower and multiwalled carbon nanotubes complex (MoS2NF@MWCNTs) with peroxidase-mimicking enzyme property were used as a substrate to modify the glassy carbon electrode to further enhance the ECL signal of luminol by promoting decomposition of H2O2 into reactive oxygen species (ROSs). In addition to the horseradish peroxidase (HRP) catalysis effect on the luminol ECL signal, a triple amplified ConA sandwich ECL sensor with high sensitivity sensor was constructed. The linear range for ConA detection was from 0.5 pg/mL to 100 ng/mL with a detection limit of 0.3 pg/mL (S/N = 3). The recovery test for ConA in human serum samples was performed with satisfactory results. Graphical abstract.

Sucrose-mediated heat-stiffening microemulsion-based gel for enzyme entrapment and catalysis.

Formation of a thermally stiffening microemulsion-based gel showing a nanoconfinement effect of carbohydrates in terms of microviscosity and hydrodynamic diameter of the reverse micelle (specifically with sucrose) is reported. The advantage of this gel as an efficient batch bioreactor for entrapped enzymes (horseradish peroxidase and thermophilic α-glucosidase) was shown, and illustrated its potential biocatalytic application at high temperatures.

Oriented immobilization of enzyme-DNA conjugates on magnetic Janus particles for constructing a multicompartment multienzyme system with high activity and stability.

Various organelles (e.g., mitochondria and chloroplasts) have a multicompartment structure, providing superior function of material transformation, selective segregation and energy conversion. Enlightened by the elegant evolution of nature, intended isolation of the biochemical process by cooperative multicompartments in cells has become an appealing blueprint to construct bioreactors. In this study, we develop a "soft separation" way to establish a delicate multicompartment multienzyme system (MMS) with polyphenol-encapsulated enzyme-DNA conjugates, which are anchored on magnetic Janus particles, providing a biomimetic catalysis network with the model cascade reactions in confinement. The well-designed MMS exhibits preferable bioactivity benefitting from the dependable DNA bridges and the oriented immobilization of enzymes, while the polyphenol shell further protects the anchored enzymes from exterior attacks, such as heat and enzymatic degradation. Moreover, by applying the MMS as nanomotors, the asymmetrical distribution of enzymes on Janus particles is found to improve mutual elevation between the self-driven locomotion and enzyme-mediated reactions, delivering enhanced dispersal ability and bioactivity. Owing to the excellent enzymatic activity, promoted stability and satisfying biocompatibility, the assembled MMS is proved to be promising for the in vitro and intracellular sensing of glucose, showing significant potential for biochemical analysis applications.

A triple-channel sensing array for protein discrimination based on multi-photoresponsive g-C3N4.

Graphitic carbon nitride (g-C3N4) as an outstanding photoresponsive nanomaterial has been widely used in biosensing. Other than the conventional single channel sensing mode, a triple-channel sensing array was developed for high discrimination of proteins based on the photoresponsive g-C3N4. Besides the photoluminescence and Rayleigh light scattering features of g-C3N4, we exploit the new photosensitive colorimetry of g-C3N4 as the third channel optical input. The triple-channel optical behavior of g-C3N4 can be synchronously changed after interaction with the protein, resulting in the distinct response patterns related to each specific protein. Such a triple-channel sensing array is demonstrated for highly discriminative and precise identification of nine proteins (hemoglobin, trypsin, lysozyme, cytochrome c, horseradish peroxidase, transferrin, human serum albumin, pepsin, and myoglobin) at 1 µM concentration levels with 100% accuracy. It also can discriminate proteins being present at different concentration and protein mixtures with different content ratios. The practicability of this sensor array is validated by high accuracy identification of nine proteins in human urine samples. This indicates that the array has a great potential in terms of analyzing biological fluids. Graphic abstract .

Colorimetric enzyme-linked aptamer assay utilizing hybridization chain reaction for determination of bovine pregnancy-associated glycoproteins.

DNA aptamers that bind to bovine pregnancy-associated glycoproteins (bPAGs) were selected by the systematic evolution of ligands by exponential enrichment (SELEX) procedure coupled to surface plasmon resonance (SPR) and high-throughput sequencing (HTS) technology. After seven rounds of selection using carboxylated magnetic beads (MB) coated with bovine pregnancy-associated glycoproteins 9 (bPAG9) and bovine serum albumin (BSA) as target and counter targets, respectively, two aptamers designated as A1 and A24 showed high affinities to bPAG9 (Kd = 1.04 and 2.5 nM). Moreover, the specificity was determined by testing the non-targets bPAG4, bPAG6, bPAG16, BSA, and ovalbumin (OVA). Results showed that two aptamers demonstrated broad group specificity to bPAG family. Subsequently, a colorimetric sandwich enzyme-linked aptamer assay was developed for ultrasensitive detection of bPAG9 based on hybridization chain reaction (HCR) amplification strategy. The method exhibited a broad determination from 0.134 to 134 ng/mL with a detection limit of 0.037 ng/mL. The method has been successfully applied to determine bPAGs in real samples. The results demonstrate that the developed aptamers could be used as promising molecular probes for the development of pregnancy diagnostic tools. Graphical abstract In this study, we first selected aptamers against bovine pregnancy-associated glycoproteins (bPAGs) as molecular recognition elements and then developed a colorimetric enzyme-linked aptamer assay utilizing hybridization chain reaction to detect bPAGs in the serum.The GA can't be deleted, the modified GA can not upload. So themodified GA and figures will be send to CorrAdmin3@spi-global.com.

In situ encapsulation of horseradish peroxidase in zeolitic imidazolate framework-8 enables catalyzing luminol reaction under near-neutral conditions for sensitive chemiluminescence determination of cholesterol.

HRP@ZIF-8 nanocomposite was prepared by in situ encapsulation of horseradish peroxidase (HRP) in the frame of zeolitic imidazolate framework-8 (ZIF-8) with a simple one-pot method. The HRP@ZIF-8 nanocomposite displays outstanding thermal stability and efficiently catalyzes the chemiluminescence (CL) reaction of luminol with hydrogen peroxide (H2O2) under near-neutral pH condition (pH 7-8). This CL system has a good response to H2O2 with a linear range of 0.1-100.0 µmol L-1. The limit of detection (LOD) is 0.06 µmol L-1 H2O2. By marriage with cholesterol oxidase, cholesterol is determined with a linear range from 0.1 to 100.0 µmol L-1 and a LOD of 0.04 µmol L-1. The relative standard deviations (RSD) are 1.7% and 2.5%, respectively, in 11 repeated measurements of 50.0 µmol L-1 solutions of H2O2 and cholesterol, indicating excellent precision of the method. The method shows good selectivity and has been applied to the determination of total cholesterol in real serum samples. No significant difference has been observed between the results obtained by this method and the cholesterol oxidase-peroxidase coupling method. Graphical abstract Schematic presentation of in situ one-pot synthesis of horseradish peroxidase@zeolitic imidazolate framework-8 (HRP@ZIF-8) nanocomposite and chemiluminescence determination of cholesterol with HRP@ZIF-8 catalyzing luminol-H2O2 system.

Nanobody-based electrochemical competitive immunosensor for the detection of AFB1 through AFB1-HCR as signal amplifier.

A novel nanobody (Nb)-based voltammetric immunosensor coupled with horseradish peroxidase concatemer-modified hybridization chain reaction (HRP-HCR) signal amplifying system is described to realize the rapid and ultrasensitive detection of AFB1. To design such an immunoassay, anti-AFB1 Nbs with smaller molecular size were coated densely onto the surface of Au nanoparticle-tungsten disulfide-multi-walled carbon nanotubes (AuNPs/WS2/MWCNTs) functional nanocomposites as an effective molecular recognition element, whereas AFB1-streptavidin (AFB1-SA) conjugates were ingeniously bound with biotinylated HCR dsDNA nanostructures as the competitor, amplifier, and signal report element. In the presence of AFB1 targets, a competitive immunoreaction was performed between the analyte and AFB1-SA-labeled HCR (AFB1-HCR) platform. Upon the addition of SA-modified polyHRP (SA-polyHRP), AFB1-HCR nanostructures containing abundant biotins were allowed to cross-link to a quantity of HRP by streptavidin-biotin chemistry for signal amplification and signal conversion. Under optimal conditions, the immunosensor displayed a good linear correlation toward AFB1 ranging from 0.5 to 10 ng mL-1 with a sensitivity of 2.7 µA • (mL ng-1) and an ultralow limit of detection (LOD) of 68 fg mL-1. The specificity test showed that the AFB1 immunosensor had no obvious cross-reaction with OTA, DON, ZEN, and FB1. The signal of this sensor decreased by 10.18% in 4 weeks indicating satisfactory stability, and its intra- and inter-laboratory reproducibility was 3.42~10.35% and 4.03%~12.11%, respectively. This biosensing system will open up new opportunities for the detection of AFB1 in food safety and environmental analysis and extend a wide range of applications in the analysis of other small molecules. Graphical abstract.