The role of clivus and atlanto-occipital lateral mass height in basilar invagination with or without atlas occipitalization.

Basilar invagination (BI) is a common deformity. This study aimed to quantitatively evaluate the height of clivus and atlanto-occipital lateral mass (LM) in patients with BI with or without atlas occipitalization (AOZ). We evaluated 166 images of patients with BI and of controls. Seventy-one participants were control subjects (group A), 68 had BI with AOZ (group B), and 27 had BI without AOZ (group C). Parameters were defined and measured for comparisons across the groups. Multiple linear regression analysis was used to test the relationship between Chamberlain's line violation (CLV) and the clivus height ratio or atlanto-occipital LM height. Based on the degree of AOZ, the lateral masses in group B were classified as follows: segmentation, incomplete AOZ, complete AOZ. From groups A to C, there was a decreasing trend in the clivus height and clivus height ratio. There was a linear negative correlation between the clivus height ratio and CLV in the three groups. Generally, the atlanto-occipital LM height followed the order of group B < group C < group A. The atlanto-occipital LM height was included only in the equations of groups B. There were no cases of atlantoaxial dislocation (AAD) in group C. There was a decreasing trend in LM height from the segmentation type to the complete AOZ type in group B. BI can be divided into three categories: AOZ causes LM height loss; Clivus height loss; Both clivus and LM height loss. The clivus height ratio was found to play a decisive role in both controls and BI group, while the atlanto-occipital LM height loss caused by AOZ could be a secondary factor in patients with BI and AOZ. AOZ may be a necessary factor for AAD in patients with congenital BI. The degree of AOZ is associated with LM height in group B.

Endoscopic Endonasal Occipitocervical Fixation with a Customized Three-Dimensional Printed Titanium Plate-Screw Construct: A Cadaveric Feasibility Study.

OBJECTIVE: To evaluate the feasibility of a novel method for occipitocervical fixation (OCF) through the endonasal corridor. METHODS: Thin-cut computed tomography scans were obtained for 5 cadaveric specimens. Image segmentation was used to reconstruct 3D models of each O-C1 joint complex. Using computer-aided design software, plates were custom-designed to span each O-C1 joint, sit flush onto the bony surface, and accommodate screws. The final models were 3D-printed in titanium. For implantation, specimens were held in pin-fixation and registered to neuronavigation. A rigid 0º endoscope was used for endonasal visualization. An inverted U-shaped nasopharyngeal flap was raised to expose the occipital condyles and C1. The plates were introduced and fixed with bone screws. Computed tomography scans were obtained to assess screw accuracy and proximity to critical neurovascular structures. Screw entry points and trajectories were recorded. RESULTS: Endonasal OCF was performed on 5 cadaveric specimens. The mean starting point for occipital condyle screws was 6.17 mm lateral and 5.38 mm rostral to the medial O-C1 joint. Mean axial and sagittal trajectories were 7.98° and 6.71°, respectively. The mean starting point for C1 screws was 16.11 mm lateral to the C1 anterior tubercle and 6.39 mm caudal to the medial O-C1 joint. Mean axial and sagittal trajectories were 10.97° and -9.91°, respectively. CONCLUSIONS: Endonasal OCF is technically and anatomically feasible. The application of this technique may allow for same-stage endonasal decompression and fixation, offering a minimally invasive alternative to current methods of fixation and advancing surgeons' ability to treat pathology of the craniovertebral junction. Next steps will focus on biomechanical testing.

Dynamic in vivo 3D atlantooccipital kinematics during multiplanar physiologic motions.

Normal biomechanics of the upper cervical spine, particularly at the atlantooccipital joint, remain poorly characterized. The purpose of this study was to determine the intervertebral kinematics of the atlantooccipital joint (occiput-C1) during three-dimensional in vivo physiologic movements. Twenty healthy young adults performed dynamic flexion/extension, axial rotation, and lateral bending while biplane radiographs were collected at 30 images per second. Motion at occiput-C1 was tracked using a validated volumetric model-based tracking process that matched subject-specific CT-based bone models to the radiographs. The occiput-C1 total range of motion (ROM) and helical axis of motion (HAM) was calculated for each movement. During flexion/extension, the occiput-C1 moved almost exclusively in-plane (ROM: 17.9 ± 6.9°) with high variability in kinematic waveforms (6.3°) compared to the in-plane variability during axial rotation (1.4°) and lateral bending (0.9°) movements. During axial rotation, there was small in-plane motion (ROM: 4.2 ± 2.5°) compared to out-of-plane flexion/extension (ROM: 12.7 ± 5.4°). During lateral bending, motion occurred in-plane (ROM: 9.0 ± 3.1°) and in the plane of flexion/extension (ROM: 7.3 ± 2.7°). The average occiput-C1 axis of rotation intersected the sagittal and coronal planes 7 mm to 18 mm superior to the occipital condyles. The occiput-C1 axis of rotation pointed 60° from the sagittal plane during axial rotation but only 10° from the sagittal plane during head lateral bending. These novel results are foundational for future work on upper cervical spine kinematics.

Does ponticulus posticus affect vertebral artery diameter.

PURPOSE: Ponticulus Posticus, atlantooccipital ligament ossification-induced anomaly, surrounds the vertebral artery and the first cervical nerve root. It is believed to wrap around the first cervical nerve root and the vertebral artery, causing compression. We hypothesized that it would also reduce the diameter of the vertebral artery. METHODS: Between January 1, 2022, and December 31, 2022, cervical spine CT scans taken for any reason were retrospectively reviewed. The images of 1365 patients suitable for evaluation were evaluated by two expert radiologists in 3 dimensions. Among patients with PP, those who underwent cervical angiography were identified for vertebral artery diameter measurement. RESULTS: The average age of the 1365 individuals included in the study (732 males, 633 females) was 55.78 (± 18.85) with an age range of 1-96. Among this group, PP was detected in 288 individuals, resulting in a total prevalence of 21.1%. Right and left vertebral artery diameters were significantly lower in patients with complete PP compared to the absent group (p < 0,001, p < 0,001, respectively). Additionally, it was observed that width and height diameters and artery diameters were positively correlated in patients with Complete PP. CONCLUSIONS: Ponticulus posticus can cause vertebrobasilar insufficiency by reducing the diameter of the vertebral artery. Therefore, imaging and detailed evaluation of this region are important in symptomatic patients.

Computed Tomography-Based Occipital Condyle Morphometric Analysis in the Turkish Population: A Trajectory Analysis for Optimal Screw Selection.

AIM: To provide a comprehensive analysis for accurate screw size selection and insertion angle during surgical procedures. MATERIAL AND METHODS: In this retrospective study, a total of 120 patients participated, resulting in the analysis of 240 occipital condyles using coronal, sagittal, and axial planes on CT scans. Statistical evaluation was performed using the Wilcoxon rank-sum test, with p < 0.05 considered statistically significant. RESULTS: The mean sagittal length and height were measured at 17.2 ± 1.7 mm and 9.1 ± 1.5 mm, respectively. The average condyle angle, a crucial factor for screw insertion, was assessed at 38.0 ± 5.5 mm in length, 19.6 ± 2.6 mm in width, and 9.5 ± 1.0 mm in height. Condyle height in the anterior and posterior hypoglossal canals was measured at 10.8 ± 1.4 mm and 9.0 ± 1.4 mm, respectively. Screw angle and condyle width were statistically smaller in females compared to the male population. CONCLUSION: The OC is a significant anatomical structure in the craniovertebral junction, playing a crucial role in stability. The obtained morphological values are applicable to the Turkish population and offer statistically significant findings for preoperative planning involving occipital condyle screw instrumentation.

Autologous rib grafts for craniocervical junction surgery in children: a clinical application.

OBJECTIVE: Autologous iliac bone is commonly used as a bone graft material to achieve solid fusion in craniocervical junction (CVJ) surgery. However, the developing iliac bone of children is less than ideal as a bone graft material. The matured rib bone of children presents a potential substitute material for iliac bone. The aim of this study was to evaluate the efficacy of autologous rib grafts for craniocervical junction surgery in children. METHODS: The outcomes of 10 children with abnormalities of the craniocervical junction who underwent craniocervical junction surgery between January 2020 and December 2022 were retrospectively reviewed. All patients underwent posterior fusion and internal fixation surgery with autologous rib grafts. Pre- and post-operative images were obtained and clinical follow-ups were conducted to evaluate neurological function, pain level, donor site complications, and bone fusion rates. RESULTS: All surgeries were successful. During the 8- to 24-month follow-up period, all patients achieved satisfactory clinical results. Computed tomography at 3-6 months confirmed successful bone fusion and regeneration of the rib defect in all patients with no neurological or donor site complications. CONCLUSION: Autologous rib bone is a safe and effective material for bone grafting in craniocervical junction fusion surgery for children that can reduce the risks of donor site complications and increase the amount of bone graft, thereby achieving a higher bone fusion rate.

Anatomy and mobility in the adult cadaveric craniocervical junction.

Genetic diseases with craniofacial malformations can be associated with anomalies of the craniocervical joint (CCJ). The functions of the CCJ are thus impaired, as mobility may be either limited by abnormal bone fusion causing headaches, or exaggerated in the case of hypermobility, which may cause irreparable damage to the spinal cord. Restoring the balance between mobility and stability requires surgical correction in children. The anatomy and biomechanics of the CCJ are quite unique, yet have been overlooked in the past decades. Pediatric evidence is so scarce, that investigating the adult CCJ is our best shot to disentangle the form-function relationships of this anatomical region. The motivation of the present study was to understand the morphological and functional basis of motion in the CCJ, in the hope to find morphological features accessible from medical imaging able to predict mobility. To do so, we have quantified the in-vitro kinematics of the CCJ in nine cadaveric asymptomatic adults, and estimated a wide range of mobility variables covering the complexity of spinal motion. We compared these variables with the shape of the occipital, the atlas and the axis, obtained using a dense geometric morphometric approach. Morphological joint congruence was also quantified. Our results suggest a strong relationship between bone shape and motion, with the overall geometry predicting best the primary movements, and the joint facets predicting best the secondary movements. We propose a functional hypothesis stating that the musculoligamental system determines movements of great amplitude, while the shape and congruence of joint facets determine the secondary and coupled movements, especially by varying the geometry of bone stops and the way ligaments are tensioned. We believe this work will provide valuable insights in understanding the biomechanics of the CCJ. Furthermore, it should help surgeons treating CCJ anomalies by enabling them to translate objectives of functional and clinical outcome into clear objectives of morphological outcome.

Anatomical determinants of occipitocervical fusion in skull base chordoma resection: a systematic review of the literature with illustrative cases.

OBJECTIVE: Skull base chordomas are rare, locally osseo-destructive lesions that present unique surgical challenges due to their involvement of critical neurovascular and bony structures at the craniovertebral junction (CVJ). Radical cytoreductive surgery improves survival but also carries significant morbidity, including the potential for occipitocervical (OC) destabilization requiring instrumented fusion. The published experience on OC fusion after CVJ chordoma resection is limited, and the anatomical predictors of OC instability in this context remain unclear. METHODS: PubMed and Embase were systematically searched according to the PRISMA guidelines for studies describing skull base chordoma resection and OC fusion. The search strategy was predefined in the authors' PROSPERO protocol (CRD42024496158). RESULTS: The systematic review identified 11 surgical case series describing 209 skull base chordoma patients and 116 (55.5%) who underwent OC instrumented fusion. Most patients underwent lateral approaches (n = 82) for chordoma resection, followed by midline (n = 48) and combined (n = 6) approaches. OC fusion was most often performed as a second-stage procedure (n = 53), followed by single-stage resection and fusion (n = 38). The degree of occipital condyle resection associated with OC fusion was described in 9 studies: total unilateral condylectomy reliably predicted OC fusion regardless of surgical approach. After lateral transcranial approaches, 4 studies cited at least 50%-70% unilateral condylectomy as necessitating OC fusion. After midline approaches-most frequently the endoscopic endonasal approach (EEA)-at least 75% unilateral condylectomy (or 50% bilateral condylectomy) led to OC fusion. Additionally, resection of the medial atlantoaxial joint elements (the C1 anterior arch and tip of the dens), usually via EEA, reliably necessitated OC fusion. Two illustrative cases are subsequently presented, further exemplifying how the extent of CVJ bony elements removed via EEA to achieve complete chordoma resection predicts the need for OC fusion. CONCLUSIONS: Unilateral total condylectomy, 50% bilateral condylectomy, and resection of the medial atlantoaxial joint elements were the most frequently described independent predictors of OC fusion in skull base chordoma resection. Additionally, consistent with the occipital condyle harboring a significantly thicker joint capsule at its posterolateral aspect, an anterior midline approach seems to tolerate a greater degree of condylar resection (75%) than a lateral transcranial approach (50%-70%) prior to generating OC instability.

Atlantoaxial dislocation in the setting of NMLFS.

BACKGROUND: Nablus mask-like facial syndrome (NMFLS) is an extremely rare genetic syndrome characterized by facial dysmorphia as well as developmental delay. In the present report we describe a potential association between non-traumatic atlanto-occipital dislocation and NMFLS in an 11-year old female lacking typical facial features of NMFLS. CASE DESCRIPTION: An 11-year-old female with autism presented with symptoms of persistent headache and vomiting as well as neck stiffness. Further investigation and CT imaging revealed congenital malformation of the skull base and craniocervical junction with complete posterior subluxation of the left occipital condyle. MRI findings later corroborated the findings on CT. CONCLUSIONS: The patient was successfully treated with occipitocervical fusion. The findings in this case suggest the possibility that atlanto-occipital instability and generalized occipitocervical may be associated with NMFLS.

The role of occipital condyle and atlas anomalies on occipital cervical fusion outcomes in Chiari malformation type I with syringomyelia: a study from the Park-Reeves Syringomyelia Research Consortium.

OBJECTIVE: Congenital anomalies of the atlanto-occipital articulation may be present in patients with Chiari malformation type I (CM-I). However, it is unclear how these anomalies affect the biomechanical stability of the craniovertebral junction (CVJ) and whether they are associated with an increased incidence of occipitocervical fusion (OCF) following posterior fossa decompression (PFD). The objective of this study was to determine the prevalence of condylar hypoplasia and atlas anomalies in children with CM-I and syringomyelia. The authors also investigated the predictive contribution of these anomalies to the occurrence of OCF following PFD (PFD+OCF). METHODS: The authors analyzed the prevalence of condylar hypoplasia and atlas arch anomalies for patients in the Park-Reeves Syringomyelia Research Consortium database who underwent PFD+OCF. Condylar hypoplasia was defined by an atlanto-occipital joint axis angle (AOJAA) ≥ 130°. Atlas assimilation and arch anomalies were identified on presurgical radiographic imaging. This PFD+OCF cohort was compared with a control cohort of patients who underwent PFD alone. The control group was matched to the PFD+OCF cohort according to age, sex, and duration of symptoms at a 2:1 ratio. RESULTS: Clinical features and radiographic atlanto-occipital joint parameters were compared between 19 patients in the PFD+OCF cohort and 38 patients in the PFD-only cohort. Demographic data were not significantly different between cohorts (p > 0.05). The mean AOJAA was significantly higher in the PFD+OCF group than in the PFD group (144° ± 12° vs 127° ± 6°, p < 0.0001). In the PFD+OCF group, atlas assimilation and atlas arch anomalies were identified in 10 (53%) and 5 (26%) patients, respectively. These anomalies were absent (n = 0) in the PFD group (p < 0.001). Multivariate regression analysis identified the following 3 CVJ radiographic variables that were predictive of OCF occurrence after PFD: AOJAA ≥ 130° (p = 0.01), clivoaxial angle < 125° (p = 0.02), and occipital condyle-C2 sagittal vertical alignment (C-C2SVA) ≥ 5 mm (p = 0.01). A predictive model based on these 3 factors accurately predicted OCF following PFD (C-statistic 0.95). CONCLUSIONS: The authors' results indicate that the occipital condyle-atlas joint complex might affect the biomechanical integrity of the CVJ in children with CM-I and syringomyelia. They describe the role of the AOJAA metric as an independent predictive factor for occurrence of OCF following PFD. Preoperative identification of these skeletal abnormalities may be used to guide surgical planning and treatment of patients with complex CM-I and coexistent osseous pathology.

A Global Bibliometric and Visualization Analysis of Craniovertebral Junction Bony Abnormalities Based on VOSviewer and Citespace.

OBJECTIVE: Recent years have witnessed a rapidly growing interest in CVJ bony abnormalities, and a qualitative and quantitative analysis of relevant literatures is necessary. This study aims to identify and summarize the published articles related to craniovertebral junction bony abnormalities, to analyze and visualize the current research trends and major contributors. METHODS: We collected data from Web of Science, excluding certain article types. Two researchers screened articles for relevance. Data were organized with EndnoteX9, and analyzed using VOSviewer and CiteSpace for co-authorship, co-occurrence, keyword burst, and co-citation analyses to identify research trends and collaborations. RESULTS: A total of 2,776 articles were included, revealing an increasing trend in annual publications of CVJ bony abnormalities. The USA was the leading country. King Edward Memorial Hospital was the most prolific institution, and Seth GS Medical College had the most citations. The Spine is the most popular journal with the highest number of publications and citations. Professor Goel Atul from India emerged as the most influential pioneer in this field. Keyword analysis highlighted surgical techniques, diagnosis, and anatomy as the primary research hotspots and Fixation, Placement, and Basilar invagination gradually become the new research trend. However, there is a relative weakness in basic research and epidemiology. CONCLUSIONS: This study provides valuable insights into the current research trends and critical contributors in CVJ bony abnormalities, guiding evidence-based decisions and fostering international collaborations to advance knowledge in this field.

[Preoperative Simulation for Complication Control in Spinal Surgery].

The craniovertebral junction not only contains anatomically important structures such as the medulla oblongata, upper cervical spinal cord, and vertebral artery, but also controls the dynamic movements of flexion, extension, and rotation of the head and neck. Consequently, instability and spinal deformities can easily occur in the craniovertebral region, and appropriate treatment should be selected based on the specificity of the lesion. Basilar invagination often involves bone and vascular anomalies and fusion surgery is often required. Therefore, careful pre-operative simulations are necessary. The creation and use of three-dimensional bone models, including image navigation, are useful for surgical simulation.

Clinical characteristics of upper cervical spine injuries in children: a retrospective case series.

OBJECTIVE: Pediatric cervical spine injuries (CSI) can be devastating, and children < 8 years are particularly at risk for upper CSI given unique anatomical differences. Diagnosis of these injuries can be delayed due to variable clinical presentations and a paucity of existing literature. The authors aimed to characterize the spectrum of pediatric upper CSI. METHODS: This was a retrospective, single-center case series of trauma patients aged < 16 years who were assessed at a level I pediatric trauma center and diagnosed with upper CSI between 2000 and 2020. Patients were included if they had evidence of bony or ligamentous injury from the occiput to C2 on imaging or autopsy. Data were obtained from manual chart review and analyzed using descriptive statistics. RESULTS: In total, 502 patients were screened and 202 met inclusion criteria. Of these, 31 (15%) had atlanto-occipital (AO) joint distractions, 10 (5%) had atlanto-axial (AA) joint distractions, 31 (15%) had fractures of C1-2, and 130 (64%) had ligamentous injury without joint distraction. Of the patients with AO injury, 15 patients had complete dislocation. They presented as hemodynamically unstable with signs of herniation and 14 died (93%). In contrast, 16 had incomplete dislocation (subluxation). They usually had stable presentations and survived with good outcomes. Of the patients with AA injury, 2 had complete dislocation, presented with arrest and signs of herniation, and died. In contrast, 8 patients with subluxation mostly presented as clinically stable and all survived with little residual disability. The most common fractures of C1 were linear fractures of the lateral masses and of the anterior and posterior arches. The most common fractures of C2 were synchondrosis, hangman, and odontoid fractures. Overall, these patients had excellent outcomes. Ligamentous injuries frequently accompanied other brain or spine injuries. When these injuries were isolated, patients recovered well. CONCLUSIONS: Among upper CSI, AO and AA joint injuries emerged as particularly severe with high mortality rates. Both could be divided into complete dislocations or incomplete subluxations, with clear clinical differences and the former presenting with much more severe injuries. Lateral cervical spine radiography should be considered during resuscitation of unstable trauma patients to assess for these CSI subtypes. Fractures and ligamentous injuries were clinically heterogeneous, with presentations and outcomes depending on severity and associated injuries.

Anatomy of the craniocervical junction - A review.

An in-depth understanding of the anatomy of the craniocervical junction (CCJ) is indispensable in skull base neurosurgery. In this paper, we discuss the osteology of the occipital bone, the atlas (C1) and axis (C2), the ligaments and the muscle anatomy of the CCJ region and their relationships with the vertebral artery. We will also discuss the trajectory of the vertebral artery and review the anatomy of the jugular foramen and lower cranial nerves (IX to XII). The most important surgical approaches to the CCJ, including the far lateral approach, the anterolateral approach of Bernard George and the endoscopic endonasal approach, will be discussed to review the surgical anatomy.

[Atlanto-occipital dislocation-A challenge with respect to making the diagnosis and treatment]. / Atlantookzipitale Dislokation ­ eine Herausforderung hinsichtlich der Diagnosestellung und Therapie.

BACKGROUND: The correct diagnosis and treatment of the atlanto-occipital dislocation (AOD) remains a major challenge. OBJECTIVE: To evaluate the different radiological diagnostic criteria for AOD and discuss potential treatment strategies based on a case with AOD and additional fracture of the atlas. MATERIAL AND METHODS: A 29-year-old male patient is presented who suffered from AOD with concomitant fracture of the anterior and posterior arches of the atlas with rotational atlantoaxial dislocation following an accident in forestry. The following parameters were evaluated for the diagnosis and assessment of postoperative reduction: Powers ratio, the X­lines-method, Wackenheim line, basion-dens interval (BDI), basion-axial interval (BAI) and occipital condyle-C1 interval (CCI). RESULTS: Stabilization was performed by occipitocervical spondylodesis from C0 to C2/3. For final reduction it was necessary to reduce the malrotation of the atlas. In the presented case, the revised CCI proved to be a sensitive and valid yet practical parameter. Powers' ratio and the BDI were less suited for assessing the diagnosis. The X­lines-method, Wackenheim line and the BAI did not adequately detect the pathological situation. DISCUSSION: The AOD is a severe injury requiring immediate correct diagnosis for later adequate treatment results. Among the published parameters, the revised CCI proved to be a practical and valid parameter to detect AOD. For definitive treatment, the operative occipitocervical stabilization is regarded as the method of choice.

Traumatic atlanto-occipital dislocation with improvement of neurological deficit: case report / Luxação traumática atlanto-occipital com melhora do déficit neurológico: relato de caso / Luxación atlanto-occipital traumática con mejoría del déficit neurológico: informe de un caso

ABSTRACT: Traumatic atlanto-occipital dislocation is a rare, severe, and usually fatal injury. In this paper, we report the case of a 28-year-old patient with multiple trauma, who suffered an atlanto-occipital dislocation (AOD) associated with rotatory dislocation at C1-C2, condyle fracture and traumatic brain injury resulting from a car accident, with a cardiopulmonary arrest at the accident site. The patient had motor and sensory deficits, suffering other complications of clinical severity during hospitalization. After two years of surgical treatment follow-up, the patient had a complete recovery of neuromotor and sensory functions. This case demonstrates that neurological recovery with minimal sequelae is possible, even after an unfavorable prognosis resulting from a severe injury with a high risk of death as this kind of trauma. It is essential for health professionals to have the ability to identify and treat AOD, ensuring improved clinical outcomes, reducing mortality and morbidity, and providing a better life to affected patients. Level of Evidence IV; Cases Series.

RESUMO: A luxação traumática atlanto-occipital (LTAO) é uma lesão rara, grave e com alto índice de mortalidade. Neste artigo relatamos o caso de um paciente de 28 anos, politraumatizado, que sofreu uma LTAO associada à luxação rotatória em C1-C2, à avulsão de côndilo e ao traumatismo crânio encefálico decorrente de acidente automobilístico, com relato de uma parada cardiorrespiratória no local do acidente. O paciente deu entrada no serviço com déficit motor e sensitivo, sofrendo outras intercorrências de gravidade clínica durante a internação. Após dois anos do tratamento cirúrgico, o paciente evoluiu favoravelmente com completa recuperação das alterações neuromotoras e sensitivas. O caso apresentado demonstra que é possível a recuperação neurológica com sequelas mínimas, mesmo após um prognóstico desfavorável decorrente de uma lesão grave e o elevado risco de morte decorrente desse tipo de trauma. É essencial que os profissionais de saúde estejam aptos a identificar e tratar a LTAO, garantindo uma melhorar dos resultados clínicos, redução da mortalidade e morbidade, além de proporcionar uma melhor qualidade de vida aos pacientes afetados. Nível de Evidência IV; Série de casos.

RESUMEN: La luxación traumática atlanto-occipital (LTAO) es una lesión grave, poco frecuente y con una elevada tasa de mortalidad. En este artículo presentamos el caso de un paciente politraumatizado de 28 años que sufrió una LTAO asociada a luxación rotatoria en C1-C2, a la avulsión de cóndilos y traumatismo craneoencefálico como consecuencia de un accidente de tráfico, con parada cardiorrespiratoria en el lugar del accidente. El paciente presentaba déficits motores y sensoriales y sufrió otras complicaciones clínicas graves durante su hospitalización. Luego de dos años de tratamiento quirúrgico, el paciente evoluciona favorablemente con recuperación completa de las alteraciones neuromotoras y sensitivas. El caso presentado demuestra que la recuperación neurológica con mínimas secuelas es posible, incluso después de un pronóstico desfavorable debido a una lesión grave y al alto riesgo de muerte derivado de este tipo de traumatismos. Es esencial que los profesionales sanitarios sean capaces de identificar y tratar la LTAO, garantizando mejores resultados clínicos, una reducción de la mortalidad y la morbilidad, y una mejor calidad de vida para los pacientes afectados. Nivel de Evidencia IV; Series de casos.

Novelties for increased safety in cranio-vertebral surgery: a review.

The cranio-vertebral junction (CVJ) was formerly considered a surgical "no man's land" due to its complex anatomical and biomechanical features. Surgical approaches and hardware instrumentation have had to be tailored in order to achieve successful outcomes. Nowadays, thanks to the ongoing development of new technologies and surgical techniques, CVJ surgery has come to be widely performed in many spine centers. Accordingly, there is a drive to explore novel solutions and technological nuances that make CVJ surgery safer, faster, and more precise. Improved outcome in CVJ surgery has been achieved thanks to increased safety allowing for reduction in complication rates. The Authors present the latest technological advancements in CVJ surgery in terms of imaging, biomaterials, navigation, robotics, customized implants, 3D-printed technology, video-assisted approaches and neuromonitoring.

Reduction of Atlanto-Occipital Dislocation After Cervical Collar Removal.

A 39-year-old male pedestrian-hit-by-car was transferred to our institution with atlantooccipital dislocation (AOD) on outside computed tomography (CT) imaging. On arrival he had a rigid cervical collar in place. Given the reported AOD, we placed the patient flat, removed the cervical collar, and supported the head in neutral alignment with sandbags. Due to a technical issue uploading his prior imaging to our system, the patient underwent repeat CTs at our center. Subsequently, after the outside images were uploaded, we were able to compare his cervical spine CT images before and after removing his cervical collar. On comparison, we noted a substantial reduction in AOD after collar removal. We hope this serves as a reminder of this key step in managing a rare but deadly clinical entity and a small demonstration of the efficacy of this intervention.