Agreement between two common tooth wear indices: Guidance on indications for use.

AIM: To assess the level of agreement between the simplified Tooth Wear Index (S-TWI) and the Basic Erosive Tooth Wear Examination (BEWE). METHODS: Data from 477 adult participants in the Adult Dental Health Survey were analysed. They were examined at home using the S-TWI and the BEWE, in that order. Agreement in the highest score at person, segment and sextant levels was measured with Gwek's agreement coefficient. The impact of the threshold used to define tooth wear (any [mild/moderate/severe] vs no wear, moderate/severe vs no/mild wear and severe vs no/mild/moderate wear) on their agreement was also evaluated. RESULTS: The prevalence of any, moderate/severe and severe tooth wear was 93.1%, 36.1% and 4.6% according to the S-TWI and it was 98.9%, 70.9% and 21.4% according to the BEWE, respectively. The agreement in the highest score between both indices was 0.745 (95% CI: 0.715, 0.775) at person level, 0.771 (95% CI: 0.746, 0.796) at the anterior segment level, 0.795 (95% CI: 0.766-0.824) for the upper anterior sextant and 0.905 (95% CI: 0.895-0.915) for the lower anterior sextant. The agreement between indices was higher for any wear than for severe wear at person, segment and sextant level. However, it was the weakest for moderate/severe wear regardless of the assessment level. CONCLUSION: The agreement between indices was high, especially when focusing on specific parts of the mouth (lower anterior teeth) and when using specific thresholds of tooth wear severity (any wear and severe wear). Agreement was constantly low when using the moderate/severe wear threshold. CLINICAL SIGNIFICANCE: When used as an epidemiological tool, the BEWE may report higher levels of tooth wear than the S-TWI. The BEWE may be a better screening tool whereas the S-TWI may be a better tool to use when determining secondary or tertiary care referral.

Complementary approaches to tooth wear analysis in Tritylodontidae (Synapsida, Mammaliamorpha) reveal a generalist diet.

Stereoscopic microwear and 3D surface texture analyses on the cheek teeth of ten Upper Triassic to Lower Cretaceous tritylodontid (Mammaliamorpha) taxa of small/medium to large body size suggest that all were generalist feeders and none was a dietary specialist adapted to herbivory. There was no correspondence between body size and food choice. Stereomicroscopic microwear analysis revealed predominantly fine wear features with numerous small pits and less abundant fine scratches as principal components. Almost all analyzed facets bear some coarser microwear features, such as coarse scratches, large pits, puncture pits and gouges pointing to episodic feeding on harder food items or exogenous effects (contamination of food with soil grit and/or dust), or both. 3D surface texture analysis indicates predominantly fine features with large void volume, low peak densities, and various stages of roundness of the peaks. We interpret these features to indicate consumption of food items with low to moderate intrinsic abrasiveness and can exclude regular rooting, digging or caching behavior. Possible food items include plant vegetative parts, plant reproductive structures (seeds and seed-bearing organs), and invertebrates (i.e., insects). Although the tritylodontid tooth morphology and auto-occlusion suggest plants as the primary food resource, our results imply a wider dietary range including animal matter.

Pica, a Little-Known Condition in Dentistry. Case Report / Pica, una Condición Poco Conocida en Odontología. Reporte de un Caso

ABSTRACT: Pica is a condition associated with the chronic, compulsive consumption of a particular substance or material that is not considered food. Culturally it is not accepted by society and its nutritional value is non-existent. When this behavior is repeated consistently for more than one month, it is considered to be Pica. This eating disorder does not have a clear etiology, but is associated with; orality in children, psychotic disorders, nutritional deficiencies, psychosocial problems, autism, family problems, OCD, stress, abuse, family separations and other traumatic events. In order to detect it, it is necessary to perform a correct anamnesis, clinical examination, radiographic examination, complementary examinations such as blood count, as well as a relationship of trust between the dentist and the patient are necessary. All of them will be able to guide us and make us come out of suspicion that this harmful behavior exists, since patients often hide it.

RESUMEN: Pica es una condición asociada al consumo compulsivo y crónico de alguna sustancia o material en particular, que no es considerada alimento. Culturalmente no es aceptado por la sociedad y su valor nutricional es inexistente. Cuando esta conducta se repite consiste-ntemente durante más de un mes, se considera como Pica. Este desorden de comportamiento alimenticio no tiene una etiología clara, pero se asocia a la oralidad en niños, trastornos psicóticos, deficiencias nutricionales, problemas psicosociales, autismo, problemas familiares, TOC, estrés, abuso, separaciones familiares y otros eventos traumáticos. Para detectarla, es necesaria una correcta anamnesis, examen clínico, radiográfico, exámenes complementarios como hemograma, además de una relación de confianza rapport odontólogo- paciente. El conjunto de ellos nos podrán guiar y salir de sospecha que esta conducta dañina existe, ya que los pacientes muchas veces lo esconden.

A guide to the clinical management of attrition.

Attrition is an enigmatic condition often found in older individuals and often as a result of bruxism which can take place as a result of either day bruxism, night bruxism or both. Various studies and systemic reviews clearly shown that tooth wear is an age-related phenomena and the last Adult Dental Health Survey showed that 15% of participants showed moderate wear and 3% severe wear with 80% of patients over 50 years of age showing signs of wear. This review examines current theories around the aetiological factors contributing to attrition together with the clinical management of attrition focusing on minimal intervention where possible.

Evaluation of sleep bruxism with a novel designed occlusal splint.

PURPOSE: This report presents our evaluation system that assesses sleep bruxism. The characteristics and fabrication process of our novel designed splint, and the analysis process of our system are presented. METHODS: The subjects were 17 volunteers. The splint was fabricated with a self-curing resin compounded with an amino-acid powder for easy wear on the semi-adjustable articulator, and adjusted for a full-balanced occlusion. An impression of the splint, located on the cast, was taken before and after it was worn. The analytical casts were made and scanned via a dental 3D scanner. The datasets were superimposed using two kinds of regions of interest (palate and occlusal surface). The differences between the two datasets were quantitatively presented with pseudo-color mapping. The maximum differences in coronal and apical directions were calculated on the selected area in the occlusal surface when the occlusal surface was used as a region of interest for registration. The relationship between the EMG activities and the change of occlusal surface of the splint were investigated. RESULTS: In all subjects, deformation and wear facets on the splint were observed. The differences in the apical direction, which indicate wear depth, were correlated with the maximum muscle activity during sleep (p=0.036). CONCLUSION: From our results, it is suggested that we are not able to eliminate the influence of parafunction for the prosthesis only by designing the surface of occlusal splint using the semi-adjustable articulator. Our splint may have the potential to detect specific facets due to parafunctions as nocturnal bruxism.

A Proposed Methodology to Assess the Accuracy of 3D Scanners and Casts and Monitor Tooth Wear Progression in Patients.

PURPOSE: The aim of this study was to detail and assess the capability of a novel methodology to 3D-quantify tooth wear progression in a patient over a period of 12 months. MATERIALS AND METHODS: A calibrated stainless steel model was used to identify the accuracy of the scanning system by assessing the accuracy and precision of the contact scanner and the dimensional accuracy and stability of casts fabricated from three different types of impression materials. Thereafter, the overall accuracy of the 3D scanning system (scanner and casts) was ascertained. Clinically, polyether impressions were made of the patient's dentition at the initial examination and at the 12-month review, then poured in type IV dental stone to assess the tooth wear. The anterior teeth on the resultant casts were scanned, and images were analyzed using 3D matching software to detect dimensional variations between the patient's impressions. RESULTS: The accuracy of the 3D scanning system was established to be 33 µm. 3D clinical analysis demonstrated localized wear on the incisal and palatal surfaces of the patient's maxillary central incisors. The identified wear extended to a depth of 500 µm with a distribution of 4% to 7% of affected tooth surfaces. CONCLUSION: The newly developed 3D scanning methodology was found to be capable of assessing and accounting for the various factors affecting tooth wear scanning. Initial clinical evaluation of the methodology demonstrates successful monitoring of tooth wear progression. However, further clinical assessment is needed.

Direct Placement Composite: the Treatment Modality of Choice to Restore the Worn or Eroded Dentition in Primary Dental Care.

Tooth wear is increasing in severity and prevalence, partly because of an ageing population and partly because of modern lifestyles. Management of the worn dentition with 'full mouth rehabilitation' is outmoded. This clinical paper aims to review the literature on composite restorations and give general dental practitioners the confidence to restore the worn dentition with dental composite. Composite is a versatile and widely available material that can be successfully applied within the existing occlusal vertical dimension (OVD) or at an increased OVD using a Dahl approach. Cases illustrate what is achievable, and clinical tips will help dentists optimise their results.

Treating Tooth Surface Loss: Adhesive Restoration of the Worn Anterior Dentition.

The treatment of tooth surface loss (TSL) is becoming more common in primary health care and a diverse variety of patients are presenting with this condition are often being treated by general dental practitioners. This article highlights the importance of comprehensive planning and adept execution that can enhance the patient's outcome and experience. Stages of clinical planning and treatment approaches using a selection of restorative materials utilising various established adhesive clinical techniques will be presented and discussed.

Relación entre la recesión ósea y atrición en cráneos secos contemporáneos / Relationship between bone recession and attrition in contemporary dry skulls

Objetivos: El objetivo de éste estudio és observar la posible influencia de las fuerzas oclusales según el grado de atrición de las piezas dentarias sobre la altura de la cresta alveolar. Material y métodos: Se estudiaron dientes de cráneos secos de la época actual y secomparó el desgaste oclusal ó atrición (A) con la pérdida de altura de la cresta alveolar (CA) ó recesión ósea (RO) y ambos registros se relacionaron estadísticamente. Resultados: De todos los dientes estudiados 2 tuvieron grado de atrición (GA) 0, 170 grado 1, 96 grado 2 y 15 grado 3. Registrando la recesión ósea (RO) las medidas extremas promedio estuvieron entre 2,80mm y 5,30mm; la mayor RO promedio se encontró en la parte media de las caras libres (pieza 23) y la menor en distal (pieza 11). Conclusión: No hay correlación entre la recesión ósea y el desgaste oclusal ó atrición.

Aim: The aim of these work is to know the relaciònship between the bonerecessiòn and the attritiòn.Materials and methods: We taken 228 teeth belonging to 25 dry skullsof actual edge and we compare the bone recession (BR) with the occlusalwaer or attrition (A) and both to be related with a statistical analyses.Results: Of all the teeth studied, 2 had attrition degree 0, 170 degree 1,96 degree 2 y 15 degree 3. Regarding the BR the measures differ between2,80 to 5,30mm. The BR major average was in the middle of the free aspect(tooth 23) and the minor in distal (tooth 11).Conclusion: There are not correlation between bone recession andocclusal wear or attrition.

Transitional bonding for segmented treatment: a two-phase restorative approach.

When extensive dental therapy is needed, as in cases of severe attrition, interim restorations are useful in determining whether or not the proposed treatment will be successful. Transitional resin bonding is one type of interim method. In this case report, a 60-year-old patient presented with severely worn maxillary and mandibular anterior teeth; he desired treatment to be done in a timely fashion so as to be ready to attend an important wedding. Due to the urgency in timing and the complexity of the case, the treatment plan was a two-phase approach that included an initial esthetic and occlusal design to create a diagnostic wax-up followed by placement of transitional composite resin bonding, and then placement of indirect porcelain restorations. This transitional bonding approach allowed comprehensive treatment to be completed at a pace suitable to the patient's needs.

Full-mouth composite rehabilitation of a mixed erosion and attrition patient: a case report with v-shaped veneers and ultra-thin CAD/CAM composite overlays.

Loss of tooth substance has become a common pathology in modern society. It is of multifactorial origin, may be induced by a chemical process or by excessive attrition, and frequently has a combined etiology. Particular care should be taken when diagnosing the cause of dental tissue loss, in order to minimize its impact. Several publications have proposed the use of minimally invasive procedures to treat such patients in preference to traditional full-crown rehabilitation. The use of composite resins, in combination with improvements in dental adhesion, allows a more conservative approach. In this paper, we describe the step-by-step procedure of full-mouth composite rehabilitation with v-shaped veneers and ultra-thin computer-aided design/computer-assisted manufacture (CAD/CAM)- generated composite overlays in a young patient with a combination of erosion and attrition disorder.

Phasic jaw motor episodes in healthy subjects with or without clinical signs and symptoms of sleep bruxism: a pilot study.

BACKGROUND: To investigate the association between each clinical diagnosis criterion for sleep bruxism (SB) and the frequency of jaw motor events during sleep. METHODS: Video-polysomnography was performed on 17 healthy adult subjects (mean age, 26.7 ± 2.8 years), with at least one of the following clinical signs and symptoms of SB: (1) a report of frequent tooth grinding, (2) tooth attrition with dentine exposure through at least three occlusal surfaces, (3) morning masticatory muscle symptoms, and (4) masseter muscle hypertrophy. Episodes of rhythmic masticatory muscle activity (RMMA) and isolated tonic activity were scored visually. These variables were compared with regards to the presence or absence of each clinical sign and symptom. RESULTS: In 17 subjects, 4.0 ± 2.5/h (0.1-10.2) RMMA and 1.0 ± 0.8/h (0-2.4) isolated tonic episodes were observed (total episodes: 5.0 ± 2.4/h (1.2-11.6)). Subjects with self-reported grinding sounds (n=7) exhibited significantly higher numbers of RMMA episodes (5.7 ± 2.3/h) than those without (n=10; 2.8 ± 1.8/h) (p=0.011). Similarly, subjects with tooth attrition (n=6) showed significantly higher number of RMMA episodes (5.6 ± 3.1/h) than those without (n=11; 3.2 ± 1.6/h) (p=0.049). The occurrence of RMMA did not differ between the presence and absence of morning masticatory muscle symptoms or muscle hypertrophy. CONCLUSIONS: Clinical signs and symptoms frequently used for diagnosing SB can represent different clinical and physiological aspects of jaw motor activity during sleep.

PICA.

"PICA" means perverted appetite for substances not fit as food or of no nutritional value such as, bricks, clay, soil, ice, laundry starch, etc. The word ''PICA'' is derived from Latin word for Magpie, a species of bird that feeds on whatever it encounters. ''PICA'' has been observed in ethnic groups worldwide in primitive and modern cultures, in both sexes and in all age groups. The case presented here reports a 30 year old female patient who had craving for ingestion of gravel and brick fragments since the age of 13 years. Iron deficiency anemia was found after complete blood count and iron studies. The diagnosis of "PICA" requires that the patient is persistently eating non-food substances for at least 1 month and such behavior is appropriate for the child's stage of development.

Managing dental erosion.

The clinical signs of dental erosion are initially subtle, yet often progress because the patient remains asymptomatic, unaware and uninformed. Erosion typically works synergistically with abrasion and attrition to cause loss of tooth structure, making diagnosis and management complex. The purpose of this article is to outline clinical examples of patients with dental erosion that highlight the strategy of early identification, patient education and conservative restorative management. Dental erosion is defined as the pathologic chronic loss of dental hard tissues as a result of the chemical influence of exogenous or endogenous acids without bacterial involvement. Like caries or periodontal disease, erosion has a multifactorial etiology and requires a thorough history and examination for diagnosis. It also requires patient understanding and compliance for improved outcomes. Erosion can affect the loss of tooth structure in isolation of other cofactors, but most often works in synergy with abrasion and attrition in the loss of tooth structure (Table 1). Although erosion is thought to be an underlying etiology of dentin sensitivity, erosion and loss of tooth structure often occurs with few symptoms. The purpose of this article is threefold: first, to outline existing barriers that may limit early management of dental erosion. Second, to review the clinical assessment required to establish a diagnosis of erosion. And third, to outline clinical examples that review options to restore lost tooth structure. The authors have included illustrations they hope will be used to improve patient understanding and motivation in the early management of dental erosion.

Oral diagnosis and treatment planning: part 4. Non-carious tooth surface loss and assessment of risk.

Non-carious tooth surface loss or tooth wear is becoming an increasingly significant factor affecting the long-term health of the dentition. The adverse effects of tooth wear are becoming increasingly apparent both in young persons and, as more people retain their teeth, into old age. This situation challenges the preventive and restorative skills of dental practitioners.

Assessment of early attrition using an ordinary flatbed scanner.

UNLABELLED: The aim of this study was to assess a two-dimensional method to monitor occlusal tooth wear quantitatively using a commercially available ordinary flatbed scanner. MATERIALS AND METHODS: A flatbed scanner, measuring software and gypsum casts were used. In Part I, two observers (A and B) independently traced scans of marked wear facets of ten sets of casts in two sessions (test and retest). In Part II, three other sets of casts were duplicated and two observers (C and D) marked wear facets and traced the scanned images independently. Intra- and inter-observer agreement was determined comparing measured values (mm(2)) in paired T-tests. Duplicate measurement errors (DME) were calculated. RESULTS: In Part I the test and retest values (10 casts, 218 teeth) of observer A and B did not differ significantly (A: p = 0.289; B: p = 0.666); correlation coefficients were 0.998 (A) and 0.999 (B). "Tracing wear facets" showed a DME of 0.30 mm(2) for observer A and 0.15 mm(2) for observer B. In Part II, assessment of 70 teeth resulted in correlation coefficients of 0.994 for observer C and 0.997 for observer D; no differences between test and retest values were found for C (p = 0.061), although D differed significantly (p = 0.000). The DME for "marking and tracing wear facets" was 0.39 mm(2) (C) and 0.27 mm(2) (D). DME for inter-observer agreement were 0.45 mm(2) (test) and 0.42 mm(2) (re-test). CONCLUSION AND CLINICAL RELEVANCE: We conclude that marking and tracing of occlusal wear facets to assess occlusal tooth wear quantitatively can be done accurately and reproducibly.

Lesões não cariosas: o desafio do diagnóstico multidisciplinar / Not carious lesions: the challenge of the multidisciplinary diagnosis

INTRODUÇÃO: A perda da superfície dos dentes ou lesão não cariosa, é um processo fisiológico que ocorre com o decorrer do envelhecimento, mas pode ser considerado patológico quando o grau de destruição cria problemas funcionais, estéticos ou de sensibilidade dentária. Diversos fatores podem contribuir em parte, mas não necessariamente simultânea ou igualmente como causa das lesões não cariosas. Apesar dos casos de desgaste (atrição, abrasão, erosão, abfração) ser comumente discutidos como alterações independentes, na maioria das vezes a perda da superfície dos dentes é resultado de uma combinação de fatores. Um dos grandes desafios é identificar ou quantificar a influência de fatores como o consumo excessivo e abusivo de drogas e substâncias ácidas, fatores ambientais e agentes etiológicos intrínsecos como o refluxo gastresofágico. O tratamento imediato deve ser direcionado para a resolução da sensibilidade e da dor, entretanto, a investigação da causa é primordial. OBJETIVO: O objetivo deste trabalho é, através de uma revisão da literatura, auxiliar as diversas especialidades médicas a identificar corretamente os fatores etiológicos das lesões não cariosas.

INTRODUCTION: The loss of the teeth surface or not carious lesion, is a physiological process that occur during the aging, but can be considered as pathological when the degree of destruction creates functional problems, aesthetic or dental sensibility. Many factors can contribute in part, but not necessarily simultaneously or equally as the cause of the not carious lesions. Although the cases of attrition (attrition, abrasion, corrosion and abfraction) are commonly discussed as independent alterations, in most of the times the loss of the teeth surface is the result of a combination of factors. One of the greatest challenges is to identify or quantify the influence of factors like the excessive consumption and abusive of drugs and acid substances, environmental factors and intrinsic etiologic agents such as gastro esophageal reflux. The immediate treatment must be directed for the resolution of sensibility and from pain; however, the investigation of the cause is essential. OBJECTIVE: The objective of this work is, through the literature review; help the many medical specialties to identify correctly the etiologic factors of not carious lesions.