Optimization of an in vitro method for assessing pulmonary permeability of inhaled drugs using alveolar epithelial cells.

INTRODUCTION: Inhalation of drugs for the treatment of pulmonary diseases has been used since a long time. Due to lungs' larger absorptive surface area, delivery of drugs to the lungs is the method of choice for different disorders. Here we present the establishment of a comprehensive permeability model using Type II alveolar epithelial cells and Beclomethasone Dipropionate (BDP) as a model drug delivered by pressurized metered dose inhaler (pMDI). METHODS: Using Type II alveolar epithelial cells, the method was standardized for parameters viz., cell density, viability, incubation period and membrane integrity. The delivery and deposition of drug were using the pMDI device with a Twin Stage Impinger (TSI) modified to accommodate cell culture insert having monolayer of cells. The analytical method for simultaneous estimation of BDP and Beclomathasone-17-Monopropionate (17-BMP) was validated as per the bioanalytical guidelines. The extent and rate of absorption of BDP was determined by quantifying the amount of drug permeated and the data represented by calculating its apparent permeability. RESULTS: Type II alveolar epithelial cells cultured at 0.55 × 105 cells/cm2 for 8-12 days under air-liquid interface were optimized for conducting permeability studies. The data obtained for absorptive transport showed a linear increase in the drug permeated against time for both BDP and 17-BMP along with proportional permeability profile. DISCUSSION: We have developed a robust in vitro model to study absorptive rate of drug transport across alveolar layer. Such models would create potential value during formulation development for comparative studies and selection of clinical candidates.

Evaluating the pharmacokinetics of beclometasone dipropionate/formoterol fumarate/glycopyrronium bromide delivered via pressurised metered-dose inhaler using a low global warming potential propellant.

INTRODUCTION: Use of propellants with high global warming potential (such as HFA-134a) for pressurised metered-dose inhalers (pMDIs) is being phased down. Switching to dry-powder inhalers may not be clinically feasible for all patients; an alternative is reformulation using propellants with low global warming potential. The combination of beclometasone dipropionate/formoterol fumarate/glycopyrronium bromide (BDP/FF/GB) is available for asthma or chronic obstructive pulmonary disease via pMDI using HFA-134a as propellant. This is being reformulated using the low global warming potential propellant HFA-152a. This manuscript reports three studies comparing BDP/FF/GB pharmacokinetics delivered via pMDI using HFA-152a vs HFA-134a. METHODS: The studies were four-way crossover, single-dose, randomised, double-blind, in healthy volunteers. In Studies 1 and 2, subjects inhaled four puffs of BDP/FF/GB (Study 1: 100/6/12.5 µg [medium-strength BDP]; Study 2: 200/6/12.5 µg [high-strength]), ingesting activated charcoal in two of the periods (once per propellant). In Study 3, subjects inhaled medium- and high-strength BDP/FF/GB using a spacer. All three studies compared HFA-152a vs HFA-134a in terms of lung availability and total systemic exposure of beclometasone-17-monopropionate (B17MP; active metabolite of BDP), BDP, formoterol and GB. Bioequivalence was concluded if the 90 % confidence intervals (CIs) of the ratios between formulations of the geometric mean maximum plasma concentration (Cmax) and area under the plasma concentration-time curve between time zero and the last quantifiable timepoint (AUC0-t) for the analytes were between 80 and 125 %. RESULTS: In Studies 1 and 2, systemic exposure bioequivalence (i.e., comparisons without charcoal block) was demonstrated, except for GB Cmax in Study 2 (upper 90 % CI 125.11 %). For lung availability (i.e., comparisons with charcoal block), B17MP and formoterol demonstrated bioequivalence in both studies, as did BDP in Study 2; in Study 1, BDP upper CIs were 126.96 % for Cmax and 127.34 % for AUC0-t). In Study 1, GB AUC0-t lower CI was 74.54 %; in Study 2 upper limits were 135.64 % for Cmax and 129.12 % for AUC0-t. In Study 3, the bioequivalence criteria were met for BDP, B17MP and formoterol with both BDP/FF/GB strengths, and were met for GB AUC0-t, although not for Cmax. Both formulations were similarly well tolerated in all three studies. CONCLUSIONS: Overall, while formal bioequivalence cannot be concluded for all analytes, these data suggest therapeutic equivalence of the new formulation with the existing BDP/FF/GB pMDI formulation, therefore supporting reformulation using a propellant with low global warming potential.

Pharmacokinetics of extrafine beclometasone dipropionate/formoterol fumarate/glycopyrronium bromide in adolescent and adult patients with asthma.

The single-inhaler extrafine formulation triple combination beclometasone dipropionate (BDP), formoterol fumarate (FF) plus glycopyrronium bromide (GB) is available for asthma management in adults. Its use in adolescents has not yet been evaluated. This study investigated the pharmacokinetic profile of BDP/FF/GB in adults and adolescents, with the aim of ruling out higher plasma exposure in adolescents compared to adults. In this open-label, non-randomized study, patients with asthma aged 12-17 (adolescents) and 18-64 years (adults) self-administered a single dose of BDP/FF/GB 400/24/50 µg via pressurized metered-dose inhaler (pMDI). The primary objective was to rule out higher systemic exposure to beclometasone 17-monopropionate (B17MP; active metabolite of BDP), formoterol, and GB in terms of the area under the plasma concentration-time curve from 0 to the last quantifiable concentration (AUC0-t ) in adolescents versus adults. A total of 40 adolescents and 40 adults entered the study (mean age of 14.8 and 43.6 years, respectively). The primary objective (AUC0-t ) was met, with the upper 90% confidence interval of the geometric mean ratio between adolescents and adults <125% for B17MP (point estimate 79.28 [90% CI 71.19; 88.29]), formoterol (88.68 [77.71; 101.20]) and GB (85.49 [72.96; 100.16]). All secondary pharmacokinetic endpoints supported the primary, with pharmacodynamic (safety) and tolerability results similar in the two populations. In conclusion, systemic exposure to extrafine BDP/FF/GB pMDI in adolescents was not higher than that in adults. Furthermore, there were no safety or tolerability signals to warrant a reduction in the dose of BDP/FF/GB for adolescents with asthma.

Spray-Congealing and Wet-Sieving as Alternative Processes for Engineering of Inhalation Carrier Particles: Comparison of Surface Properties, Blending and In Vitro Performance.

PURPOSE: Traditionally, α-lactose monohydrate is the carrier of choice in dry powder inhaler (DPI) formulations. Nonetheless, other sugars, such as D-mannitol, have emerged as potential alternatives. Herein, we explored different particle engineering processes to produce D-mannitol carriers for inhaled delivery. METHODS: Wet-sieving and spray-congealing were employed as innovative techniques to evaluate the impact of engineering on the particle properties of D-mannitol. To that end, the resulting powders were characterized concerning their solid-state, micromeritics and flowability. Afterwards, the engineered carrier particles were blended with inhalable size beclomethasone dipropionate to form low dose (1 wt%) DPI formulations. The in vitro aerosolization performance was evaluated using the NEXThaler®, a reservoir multi-dose device. RESULTS: Wet-sieving generated D-mannitol particles with a narrow particle size distribution and spray-congealing free-flowing spherical particles. The more uniform pumice particles with deep voids and clefts of wet-sieved D-mannitol (Pearl300_WS) were beneficial to drug aerosolization, only when used in combination with a ternary agent (10 wt% of 'Preblend'). When compared to the starting material, the spray-congealed D-mannitol has shown to be promising in terms of the relative increase of the fine particle fraction of the drug (around 100%), when used without the addition of ternary agents. CONCLUSIONS: The wet-sieving process and the related aerosolization performance are strongly dependent on the topography and structure of the starting material. Spray-congealing, has shown to be a potential process for generating smooth spherical particles of D-mannitol that enhance the in vitro aerosolization performance in binary blends of the carrier with a low drug dose.

Development and validation of a LC-MS/MS method for simultaneous determination of six glucocorticoids and its application to a pharmacokinetic study in nude mice.

In this study, a simple, rapid and sensitive LC-MS/MS analytical method for simultaneous determination of six glucocorticoids including 21-hydroxy deflazacort (21-OH DFZ), prednisolone (PNL), betamethasone (BET), beclomethasone (BEC), triamcinolone acetonide (TCA), budesonide (BUD) in nude mice plasma was developed and validated. Using testosterone as internal standard, the plasma samples were prepared by precipitation with acetonitrile and separated using an ACQUITY UPLC BEH C18 column (100 mm × 2.1 mm, 1.7 µm) with a mobile phase composed of acetonitrile and 0.1 % (v/v) formic acid aqueous solution by gradient elution at a flow rate of 0.3 mL/min. Quantitation was performed on a triple quadruple tandem mass spectrometer by multiple reaction monitoring in positive electrospray ionization mode. Calibration curves were developed over the range of 1-400 ng/mL for TCA, 5-2000 ng/mL for 21-OH DFZ, BET, BEC as well as BUD, and 10-2000 ng/mL for PNL. The accuracy, precision, matrix effect, recovery and stability were validated to be within acceptable criteria. The method was successfully applied to a preclinical pharmacokinetic (PK) study of the six GCs on female nude mice after a single oral dose of 1 mg/kg. The PK profiles of all the six GCs were described by two-compartment model with first-order absorption rate.

Pharmacokinetics, pharmacodynamics and safety of a novel extrafine BDP/FF/GB combination delivered via metered-dose inhaler in healthy Chinese subjects.

BACKGROUND: BDP/FF/GB pMDI is a novel triple fixed-dose combination of extra-fine inhalation aerosol beclomethasone dipropionate (BDP)/formoterol fumarate (FF)/glycopyrronium bromide (GB). Limited data on the pharmacokinetic (PK) and pharmacodynamic (PD) properties of BDP/FF/GB fixed-dose combination in healthy subjects was available. PURPOSES: This study aimed to evaluate the pharmacokinetics, pharmacodynamics and safety of BDP/FF/GB pMDI in healthy Chinese subjects. METHODS: This is an open-label, parallel-group, randomized, single and multiple dose study. In the single dose group, subjects received single supra-therapeutic inhaled dose of BDP/FF/GB pMDI (BDP/FF/GB 400/24/50 µg). In the multiple dose group, subjects received therapeutic inhaled dose of BDP/FF/GB pMDI (BDP/FF/GB 200/12/25 µg), twice daily, for 7 consecutive days. Plasma BDP, B17MP, formoterol and GB were determined by a validated ultra performance liquid chromatography method with tandem mass spectrometric detection (UPLC/MS-MS). Heart rate (HR), QTcF, systolic blood pressure (SBP) and diastolic blood pressure (DBP) were evaluated as the surrogate indicators of pharmacodynamic effects. RESULTS: A total of 24 subjects were randomized and 22 (11 in each group) completed the study. The dose adjusted pharmacokinetic profiles of BDP, beclomethasone-17-monopropionate (B17MP, the most active metabolite of BDP), formoterol and GB were overall similar in therapeutic and supra- therapeutic dose group, showing dose proportional increase of the systemic exposure to BDP, B17MP, formoterol and GB. The pharmacodynamic variables were within the normal range and showed no significant difference between the two groups. All the treatment-emergent adverse events (TEAEs) were mild and no severe TEAE was reported. CONCLUSIONS: Dose adjusted PK profiles were similar between therapeutic and supra-therapeutic dose for all compounds, nearly dose proportional systemic exposure to B17MP, formoterol and GB after BDP/FF/GB pMDI administration in healthy Chinese subjects. BDP/FF/GB pMDI was safe and well tolerated in healthy Chinese subjects. The PK profiles were comparable to previously published data from Western European healthy Caucasian subjects.

Bioavailability of Beclometasone From Two HFA-BDP Formulations With a Spacer.

BACKGROUND: The drug delivery characteristics of each inhaler/spacer combination are unique. The spacer size as well as the presence of electrostatic charge greatly influence the inhaler dose emission and in vivo delivery. Using a previously developed urinary pharmacokinetic method, we have measured the relative lung and systemic bioavailability of beclometasone dipropionate (BDP) after inhalation from 2 hydrofluroalkane-beclometasone dipropionate (HFA-BDP) formulations when used with a spacer. METHODS: 12 healthy volunteers received 8 randomized doses, separated by 7 d, of inhaled of BDP with either the Clenil pressurized metered-dose inhaler (pMDI; 250 µg) or the breath-actuated Qvar Easi-Breathe inhaler (100 µg), used alone or with a spacer. The urinary amounts of BDP excreted and retained in the spacer were assayed using a liquid chromatographic mass spectrometer. The spacer was assessed after washing with a detergent solution that was either rinsed or not rinsed with water. In addition, the aerodynamic characterization of each inhaler/spacer combination was assessed using the Andersen Cascade Impactor operated at 28 L/min using a 4-L inhalation volume. The amount of BDP deposited in the induction port, spacer, and various Anderson Cascade Impactor stages were determined. RESULTS: The in vivo 30-min urinary excretion and the in vitro fine particle dose results were only slightly affected by adding the spacer to the Clenil pMDI or the Qvar Easi-Breathe inhaler. However, the spacer significantly reduced drug particle impaction in the oropharynx and minimized deposition in the gastrointestinal tract. Therefore, using spacers with BDP inhalers is associated with a more favorable therapeutic ratio because it has little effect on lung dose, but it significantly reduced throat deposition. An improved lung deposition was achieved with non-rinsed spacers compared to spacers rinsed with water. CONCLUSION: The difference in the BDP particle size between formulations as well as spacer size greatly affected drug deposition in different regions of the respiratory tract.

Management of severe COPD exacerbations: focus on beclomethasone dipropionate/formoterol/glycopyrronium bromide.

The major determinant of the decline in lung function, quality of life, and the increased mortality risk in patients with COPD is represented by severe acute exacerbations of the disease, that is, those requiring patients' hospitalization, constituting a substantial social and health care burden in terms of morbidity and medical resource utilization. Different long-term therapeutic strategies have been proposed so far in order to prevent and/or reduce the clinical and social impact of these events, the majority of which were extrapolated from trials initially focused on the effect of long-acting muscarinic antagonist and subsequently on the efficacy of long-acting ß2-agonists in combination or not with inhaled corticosteroids. The option to employ all three classes of molecules combined, despite the limited amount of evidence in our possession, represents a choice currently proposed by international guidelines; however, current recommendations are often based mainly on observational studies or on the results of secondary outcomes in randomized controlled trials. The present narrative review evaluates the available trials that investigated the efficacy of inhaled therapy to prevent COPD exacerbations and especially severe ones, with a particular focus on beclomethasone dipropionate/formoterol/glycopyrronium bromide fixed dose combination, which is the first treatment that comprises all the three drug classes, specifically tested for the prevention of moderate and severe COPD exacerbations.

Lung Deposition of the Dry Powder Fixed Combination Beclometasone Dipropionate Plus Formoterol Fumarate Using NEXThaler® Device in Healthy Subjects, Asthmatic Patients, and COPD Patients.

BACKGROUND: This study evaluated the lung deposition and the distribution pattern in the airways of a fixed combination of beclometasone dipropionate (BDP) and formoterol fumarate (FF) (100/6 µg) delivered as an extrafine dry powder formulation (mass median aerodynamic diameter, MMAD (µm) BDP = 1.5; FF = 1.4) through the NEXThaler® device in healthy subjects, asthmatics, and patients with COPD. METHODS: Healthy subjects (n = 10), asthmatic patients (n = 9; 30%≤FEV1 < 80%), and COPD patients (n = 9; FEV1/FVC ≤70%, 30%≤FEV1 < 50%) completed this open-label, single administration (inhalation of four actuations) parallel group study. After inhalation of 99mTc-radiolabeled BDP/FF combination (radiolabeled BDP + unlabeled FF), the drug deposition was assessed using a gamma-scintigraphy technique. Patients' lung function was assessed. RESULTS: No significant difference in drug deposition was observed between the three study groups. Mean lung deposition, extrathoracic deposition, and amount exhaled ranged, respectively, between 54.9% and 56.2%, between 41.8% and 43.2%, and between 1.6% and 3.3% of BDP emitted dose (71.7 ± 2.5 µg) for the three study groups. The central to peripheral ratio (reflecting the lung distribution pattern) ranged between 1.23 and 2.02 for the three study groups, indicating a distribution of the drug throughout the airways, including periphery. The study treatment produced a forced expiratory volume in one second (FEV1) increase over time, reaching a maximum improvement generally within 1-4 hours. CONCLUSIONS: The fixed extrafine dry powder combination BDP/FF (100/6 µg) administered through the DPI NEXThaler® achieved similar intrapulmonary deposition in healthy subjects, in asthmatic patients, and COPD patients (approximately 55% of emitted dose) irrespective of the underlying lung disease with a negligible amount of exhaled particles. The study showed high reliability of the device, reproducible dosing, and distribution throughout the lungs. The results supported the concept of efficient delivery of the combination to the target pulmonary regions, thanks to the extrafine formulation. FEV1 profile confirmed a relevant pharmacodynamic effect of the product.

Development of pH-Dependent Nanospheres for Nebulisation- In vitro Diffusion, Aerodynamic and Cytotoxicity Studies.

The aim of this work was to evaluate the in vitro performance of nebulized nanosuspension formulation when nebulized using ultrasonic nebulizer. The present investigation deals with successful formulation of Beclomethasone dipropionate loaded HPMCP nanospheres prepared by solvent evaporation technique using PEG 400 as a stabilizer. Beclomethasone dipropionate is a water insoluble drug molecule was encapsulated in HPMCP nanospheres to have pH dependent solubility at basic pH for targeted drug delivery in lung and studied for in vitro cytotoxicity and immediate release capability. The synthesized nanospheres were characterized through drug excipient compatibility, surface topography; mean particle size , zeta potential, PDI, entrapment efficiency and drug loading, in vitro diffusion, aerodynamic, in vitro cytotoxicity and stability studies. The mean particle size and PDI of the optimized batch (F1) had 197.6±0.40 nm and 0.324 ±0.35, respectively. The % entrapment efficiency and % drug loading was found to be 86.56±1.32 and 8.30±0.27, respectively. The optimized batch F1 showed % cumulative drug release 94.77±0.24 at 1 h. The formulation showed cell viability up to 91.28%. It can be concluded that, Beclomethasone dipropionate loaded HPMCP nanospheres was found to be safe, stable with significant increase in solubility and bypass the liver.

Pharmacokinetics of Beclomethasone Dipropionate Delivered by Breath-Actuated Inhaler and Metered-Dose Inhaler in Healthy Subjects.

BACKGROUND: Breath-actuated inhalers (BAIs) eliminate the need for hand-breath coordination required of pressurized metered-dose inhalers (MDIs). This pharmacokinetic study compared systemic exposure following beclomethasone dipropionate delivery through BAI versus MDI. METHODS: This open-label, three-period crossover, single-dose study randomized healthy subjects aged 18-45 years (N = 72) to 1 of 6 treatment sequences containing beclomethasone dipropionate BAI 160 mcg (40 mcg/inhalation, 4 inhalations), beclomethasone dipropionate BAI 320 mcg (80 mcg/inhalation, 4 inhalations), and beclomethasone dipropionate MDI 320 mcg (80 mcg/inhalation, 4 inhalations). Blood samples were collected predose through 24 hours postdose for determination of plasma concentrations of beclomethasone-17-monopropionate (17-BMP), the active metabolite of beclomethasone dipropionate. The primary pharmacokinetic parameters were area under the plasma drug concentration-time curve (AUC) from time 0 (predose) until the last measurable drug concentration (AUC0-t) and maximum plasma drug concentration (Cmax) for 17-BMP. Safety was assessed by adverse events, vital signs, clinical laboratory tests, and physical examinations. RESULTS: Plasma concentrations of 17-BMP peaked at a median of 10 minutes after the last inhalation of all study treatments and remained measurable for at least 18 hours in most subjects. Mean elimination half-life was ∼4 hours. The AUC0-t and Cmax for 17-BMP were 11% and 14% higher, respectively, when beclomethasone dipropionate 320 mcg was administered through BAI versus MDI, but the 90% confidence intervals of the geometric least squares mean BAI:MDI ratio for each parameter were fully contained within the bioequivalence boundaries of 0.80-1.25. Plasma concentrations of 17-BMP following beclomethasone dipropionate 160 mcg BAI were approximately half those with 320 mcg through BAI or MDI. All treatments were safe and generally well tolerated. CONCLUSIONS: Systemic availability of 17-BMP following administration of beclomethasone dipropionate was bioequivalent between BAI and MDI at the 320-mcg dose, and approximately dose proportional at the 160- and 320-mcg doses using the BAI.

The use of oral corticosteroids in inflammatory bowel diseases in Italy: An IG-IBD survey.

AIM: To evaluate how Italian gastroenterologists use corticosteroids in clinical practice for the treatment of Crohn's disease (CD) and ulcerative colitis (UC). MATERIAL AND METHODS: All members of the Italian Group for Inflammatory Bowel Disease (IG-IBD) were invited to fill in a web-based questionnaire. RESULTS: 131/448 (29.2%) members completed the survey. In mild-to-moderate UC and CD relapses, low-bioavailability steroids (LBS) are first-line therapy for 37% and 42% of clinicians, respectively. In case of failure, immediate step-up to biologics or immunosuppressants is considered by 23% and 29%. Regarding conventional corticosteroids (CCS), a fixed starting dose is prescribed by 50%, and a weight-based dose by 22%. Tapering is started after 7-10days by 41% and after 14days by 32%. The preferred tapering schedule is 5mg/week. In case of CCS failure, 47% switch to parenteral steroids before considering shifting to different drug classes. In case of symptoms recurrence during tapering, 14% re-increase the dose and try tapering again. Before prescribing steroids, 72% do not prescribe any specific evaluation whereas during treatment some evaluation is performed by 85%. Vitamin D and calcium supplements are routinely prescribed along with steroids by 38%. CONCLUSIONS: Several discrepancies and some deviation from the available guidelines were recorded among Italian gastroenterologists regarding corticosteroids use in IBD patients.

A Biocompatible Synthetic Lung Fluid Based on Human Respiratory Tract Lining Fluid Composition.

PURPOSE: To characterise a biorelevant simulated lung fluid (SLF) based on the composition of human respiratory tract lining fluid. SLF was compared to other media which have been utilized as lung fluid simulants in terms of fluid structure, biocompatibility and performance in inhalation biopharmaceutical assays. METHODS: The structure of SLF was investigated using cryo-transmission electron microscopy, photon correlation spectroscopy and Langmuir isotherms. Biocompatibility with A549 alveolar epithelial cells was determined by MTT assay, morphometric observations and transcriptomic analysis. Biopharmaceutical applicability was evaluated by measuring the solubility and dissolution of beclomethasone dipropionate (BDP) and fluticasone propionate (FP), in SLF. RESULTS: SLF exhibited a colloidal structure, possessing vesicles similar in nature to those found in lung fluid extracts. No adverse effect on A549 cells was apparent after exposure to the SLF for 24 h, although some metabolic changes were identified consistent with the change of culture medium to a more lung-like composition. The solubility and dissolution of BDP and FP in SLF were enhanced compared to Gamble's solution. CONCLUSION: The SLF reported herein constitutes a biorelevant synthetic simulant which is suitable to study biopharmaceutical properties of inhalation medicines such as those being proposed for an inhaled biopharmaceutics classification system.

A Two-Period Open-Label, Single-Dose Crossover Study in Healthy Volunteers to Evaluate the Drug-Drug Interaction Between Cimetidine and Inhaled Extrafine CHF 5993.

BACKGROUND AND OBJECTIVES: CHF 5993 is an extrafine 'triple therapy' combination of the long-acting muscarinic antagonist glycopyrronium bromide (GB), the long-acting ß2-agonist formoterol fumarate (FF), and the inhaled corticosteroid beclometasone dipropionate (BDP). It is in development for chronic obstructive pulmonary disease and asthma delivered via pressurised metered-dose inhaler. METHODS: This two-period, open-label, crossover study examined the drug-drug interaction of CHF 5993 and cimetidine. In one period, subjects received cimetidine 800 mg twice daily for 6 days; on the fourth day they also received CHF 5993 (BDP/FF/GB 400/24/100 µg). In the other, they received CHF 5993 alone. Primary objective was to compare the area under the plasma concentration-time curve from time 0 to last quantifiable concentration (AUC0-t) of GB, with and without cimetidine. Secondary endpoints included GB AUC0-12h, maximum concentration (C max), time to C max (t max), elimination half-life (t ½) and urinary excretion. Pharmacokinetic parameters of BDP, beclometasone-17-monopropionate (B17MP; active metabolite of BDP) and formoterol were also evaluated. RESULTS: Twenty-six subjects were randomised; 25 completed. Co-administration of CHF 5993 and cimetidine resulted in small, statistically significant increases in GB AUC0-t, AUC0-12h and C max vs CHF 5993 (ratios 1.16, 1.21 and 1.26, respectively); t ½, t max and urinary excretion were unaffected. There were small, statistically significant increases in formoterol AUC0-t, AUC0-24h and t ½ following co-administration of cimetidine and CHF 5993; urinary excretion was unaffected. There were no significant differences for either BDP or B17MP. There were few adverse events (AEs), and no serious AEs. CONCLUSIONS: Overall, this study indicates that there is no clinically relevant drug-drug interaction between CHF 5993 and cimetidine.

Internal exposure dynamics drive the Adverse Outcome Pathways of synthetic glucocorticoids in fish.

The Adverse Outcome Pathway (AOP) framework represents a valuable conceptual tool to systematically integrate existing toxicological knowledge from a mechanistic perspective to facilitate predictions of chemical-induced effects across species. However, its application for decision-making requires the transition from qualitative to quantitative AOP (qAOP). Here we used a fish model and the synthetic glucocorticoid beclomethasone dipropionate (BDP) to investigate the role of chemical-specific properties, pharmacokinetics, and internal exposure dynamics in the development of qAOPs. We generated a qAOP network based on drug plasma concentrations and focused on immunodepression, skin androgenisation, disruption of gluconeogenesis and reproductive performance. We showed that internal exposure dynamics and chemical-specific properties influence the development of qAOPs and their predictive power. Comparing the effects of two different glucocorticoids, we highlight how relatively similar in vitro hazard-based indicators can lead to different in vivo risk. This discrepancy can be predicted by their different uptake potential, pharmacokinetic (PK) and pharmacodynamic (PD) profiles. We recommend that the development phase of qAOPs should include the application of species-specific uptake and physiologically-based PK/PD models. This integration will significantly enhance the predictive power, enabling a more accurate assessment of the risk and the reliable transferability of qAOPs across chemicals.

Beclomethasone HFA for the treatment of allergic rhinitis.

INTRODUCTION: Allergic rhinitis (AR) is a common chronic disorder, affecting 10 -30% of populations. AR has significant morbidity and expense. AR patients treat themselves with over-the-counter medications. However the usual H1 antihistamines are often inadequate. Intranasal corticosteroids effectively diminish AR symptoms. Beclomethasonedipropionate (BDP) was reported to effectively treat adults and children with AR. BDP was a chlorofluorocarbon (CFC) propellant pressurized metered dose inhaler (pMDI). Subsequently BDP appeared in an aqueous format. Some patients preferred the dryer sensation of pMDI to aqueous formulations. The protocol of Montréal, removed CFC devices from medical practice. The remaining intranasal steroids were in aqueous format. Many patients did not like the sensory perceptions using liquids intranasal. They were unlikely to be compliant. BDP hydrofluoroalkanepMDI (BDP HFA) was developed. AREAS COVERED: The need of active treatment of AR will be reviewed. Chemistry, pharmacokinetics and pharmacodynamics of BDP HFA will be presented. Clinical efficacy studies and safety data which led to the approval of BDP for use in adults and children will be reviewed. EXPERT OPINION: BDP HFA is an option to treat AR, demonstrating a favorable therapeutic index in large double-blind placebo-controlled studies. BDP HFA appeals to select AR patients.

Stability-indicating RP-HPLC method for determination of beclomethasone dipropionate in nanocapsule suspensions

abstract A simple stability-indicating RP-HPLC/UV method was validated for determination of beclomethasone dipropionate (BD) in nanocapsule suspensions. Chromatographic conditions consisted of a RP C18column (250 mm x 4.60 mm, 5 µm, 110 Å), using methanol and water (85:15 v/v) as mobile phase at 1.0 mL/min with UV detection at 254 nm. The calibration curve was found to be linear in the concentration range of 5.0-25.0 µg/mL with a correlation coefficient > 0.999. Precision was demonstrated by a relative standard deviation lower than 2.0%. Accuracy was assessed by the recovery test of BD from nanocapsules (98.03% to 100.35%). Specificity showed no interference from the components of nanocapsules or from the degradation products derived from acid, basic and photolytic conditions. In conclusion, the method is suitable to be applied to assay BD in bulk drug and in nanocapsules, and it can be employed to study stability and degradation kinetics.

resumo Um método simples de CLAE-FR/UV indicativo de estabilidade foi validado para a determinação do dipropionato de beclometasona (BD) em suspensões de nanocápsulas. As condições cromatográficas foram: coluna C18 fase reversa (250 mm x 4,60 mm, 5 µm, 110 Å), usando como fase móvel metanol e água (85:15 v/v) a 1,0 mL/min, com detecção UV a 254 nm. A curva de calibração foi linear no intervalo de 5,0-25,0 µg/mL com coeficiente de correlação >0,999. A precisão foi demonstrada por um desvio padrão relativo menor que 2,0%. A exatidão foi avaliada pelo teste de recuperação do BD a partir das nanocápsulas (98,03% a 100,35%). O teste de especificidade não mostrou interferência dos componentes das nanocápsulas e nem dos produtos de degradação derivados de condições ácidas, básicas e fotolíticas. Em conclusão, o método é adequado para ser aplicado na avaliação do BD puro e em nanocápsulas e pode ser empregado para o estudo de estabilidade e degradação cinética.

Beclomethasone Dipropionate-Loaded Polymeric Nanocapsules: Development, In Vitro Cytotoxicity, and In Vivo Evaluation of Acute Lung Injury.

The aim of this work was to develop polymeric nanocapsules intended for the pulmonary delivery of beclomethasone dipropionate using ethyl cellulose or poly(ε-caprolactone). The formulations showed adequate physicochemical characteristics, namely, average diameter lower than 260 nm, low polydispersity index (< 0.2), negative zeta potential, neutral pH values, and encapsulation efficiencies close to 100%. The thermal analysis by DSC suggested that beclomethasone dipropionate encapsulated in the nanocapsules was in an amorphous state. In addition, both ethyl cellulose and poly(ε-caprolactone) nanocapsules were able to delay the drug photodegradation under UVC radiation. The in vitro drug release showed a prolonged release without burst effect using the dialysis bag diffusion technique. Moreover, ethyl cellulose and poly(ε-caprolactone) nanocapsules presented low in vitro cytotoxicity on 3T3 fibroblasts cells. In vivo, the formulations showed no acute pulmonary injury in rats. Therefore, the developed nanocapsules could be considered suitable carriers to be used for beclomethasone dipropionate pulmonary delivery.

Pharmacokinetics and pharmacodynamics of an extrafine fixed pMDI combination of beclometasone dipropionate/formoterol fumarate in adolescent asthma.

AIM: The aim was to investigate the pharmacokinetics and pharmacodynamics of an extrafine pressurized metered-dose inhaler (pMDI) fixed combination of beclometasone dipropionate (BDP)/formoterol fumarate (FF) in adolescent and adult asthma. METHODS: This was a three-way crossover study, on 30 asthmatic adolescents receiving BDP/FF pMDI with or without a valved holding chamber (VHC) or a free licenced combination of BDP pMDI and FF pMDI plus a parallel arm of 30 asthmatic adults receiving BDP/FF pMDI. All patients received a single dose of BDP and FF of 400 µg and 24 µg, for each treatment, respectively. Assessments were performed over 8 hours. RESULTS: In adolescents, the 90% confidence intervals (CIs) for the systemic exposure (AUC(0,t)) geometric mean ratio of the fixed combination with or without VHC vs. the free combination were within the bioequivalence range 0.80-1.25, both for beclometasone-17-monopropionate (B17MP, the active metabolite of BDP) and formoterol. Pharmacodynamic variables for plasma potassium and glucose, pulse rate and pulmonary function in adolescents were equivalent between treatments, 95% CI within 0.9, 1.09. The upper level of 90% CIs for AUC(0,t) geometric mean ratio adolescents : adults of B17MP and formoterol after treatment with BDP/FF pMDI was lower than 1.25, 90% CI 0.78, 1.04 and 0.86, 1.17, respectively. CONCLUSIONS: In adolescents the pharmacodynamics and the overall systemic exposure to the active ingredients of an extrafine fixed combination of BDP/FF pMDI with or without a VHC was equivalent to that of a free licenced combination of pMDIs of established safety and efficacy profiles. The systemic exposure in adolescents was not higher than in adults. These results support the indication for use of inhaled corticosteroid/long acting ß2 -adrenoceptor agonist pMDIs in adolescents at the same dosage as in adults.

Nasal Deposition of HFA-Beclomethasone, Aqueous Fluticasone Propionate and Aqueous Mometasone Furoate in Allergic Rhinitis Patients.

BACKGROUND: The deposition of nasal aerosols from both aqueous formulations and propellant-based formulations has only minimally been described in rhinitis patients. This study quantified the regional nasal deposition of QNASL(™) (HFA-beclomethasone, nasal aerosol), Flonase(™) (fluticasone propionate, nasal spray) and Nasonex(™) (mometasone furoate monohydrate, nasal spray). METHODS: This study was an open label, crossover study in nine patients with allergic rhinitis. The regional nasal deposition of the three nasal products was compared and contrasted following delivery of the (99m)Tc-radiolabeled drug product in each product. The gamma images were merged with magnetic resonance images to quantify regional deposition within the patients. RESULTS: The HFA propellant-based formulation (QNASL) resulted in an increased retention of drug product in the nasal cavity compared with the two aqueous formulations (Flonase and Nasonex). The aqueous based formulations resulted in increased amount of the delivered dose that dripped from the nostril (6/8 patients for each of the aqueous formulations and 0/8 patients for the HFA propellant formulation) following administration. The percentage of delivered dose that deposited in the back of the throats of the patients was increased and variable (0.1% to 17.6% with Flonase and 0.0 to 4.7% for Nasonex) for the aqueous formulations when compared to dose delivered for the HFA propellant formulation (0.0% to 1.7% for QNASL). CONCLUSIONS: The regional deposition of the HFA propellant based formulation resulted in increased retention of drug product in the nasal cavity and decreased deposition in the back of the throat compared to the two aqueous formulations.