RESUMO
Beryllium-7 activity concentrations in the atmosphere and precipitation were continuously measured every day between April 2011 and December 2015 in Dazaifu, western Japan. The measured data were quantitatively analyzed to determine the precipitation-induced variation in 7Be activity concentrations. The average concentrations on nonprecipitation and precipitation days were 5.5 and 3.8 mBq/m3, respectively. This difference of 31% (1.7 mBq/m3) on average, was attributable to the washout effect, which was more significant in the summer. Regarding the association between 7Be activity concentration and precipitation, the concentration remained at a similar level for the small precipitation amount of <5.0 mm/day and showed a decreasing trend (but was insignificant) for the precipitation of 5.0-10.0 mm/day. A significant decrease in the concentration was observed for ≥10 mm/day. Furthermore, when precipitation occurred on two successive days, the 7Be activity concentrations on the second day significantly decreased regardless of precipitation.
Assuntos
Poluentes Radioativos do Ar , Atmosfera , Berílio , Monitoramento de Radiação , Berílio/análise , Japão , Monitoramento de Radiação/métodos , Poluentes Radioativos do Ar/análise , Atmosfera/química , Radioisótopos/análise , Chuva/química , Estações do AnoRESUMO
OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.
Assuntos
Arsênio , Mercúrio , Oligoelementos , Acetatos , Alumínio/análise , Antimônio/análise , Arsênio/análise , Bário/análise , Berílio/análise , Cádmio/análise , Cromo , Argila , Cobalto/análise , Cobre , Lítio/análise , Magnésio , Espectrometria de Massas , Mercúrio/análise , Molibdênio/análise , Níquel , Prata/análise , Tálio/análise , Estanho/análise , Titânio/análise , Oligoelementos/análise , Zinco , ChinaRESUMO
The atmospheric bulk depositional fluxes of 210Pb were measured at a station on the Adriatic coast, Croatia over 4 years period from March 2017 to December 2020. The monthly depositional fluxes followed oceanic deposition patterns with a lower flux between 0.0735 and 16.9 Bq m-2 month-1. The volume-weighted activities were 0.000514 and 1.35 Bq L-1 and decreased with increasing precipitation. A clear seasonal trend was observed with higher depositional flux in autumn and minimum value in the winter season. The average annual bulk depositional flux and volume-weighted activities of 210Pb were 73.8 Bq m-2 y-1 and 0.119 Bq L-1 respectively. The precipitation normalized enrichment factor (α) indicates higher depositional fluxes of 210Pb during summer and spring than desired value according to the amount of precipitation. We found that the 210Pb depositional fluxes in the coastal stations are lower due to 210Pb-depleted oceanic air masses and increase with the amount of precipitation.
Assuntos
Poluentes Radioativos do Ar , Radioisótopos de Chumbo , Radioisótopos de Chumbo/análise , Chumbo , Croácia , Berílio/análise , Poluentes Radioativos do Ar/análise , Estações do Ano , Monitoramento AmbientalRESUMO
The manganese salt bath is considered a primary standard for determining the absolute emission rate of radionuclide neutron sources. The National Research Council of Canada has recently revived its manganese salt bath and a full description of the system is given here. The physical characteristics of the bath, as well as the methods for determining the efficiency of the bath system and the induced activity in the bath, are described. An in-depth analysis of the fraction of neutrons captured in the manganese and the correction factor for neutron losses is also provided. Finally, the results of emission rate measurements of four different sources, complete with an uncertainty budget, are given. The emission rates of three americium-beryllium neutron sources and one californium-252 neutron source were found to agree with the known values, within a standard uncertainty of 1.7%.
Assuntos
Califórnio , Manganês , Doses de Radiação , Calibragem , Califórnio/análise , Nêutrons , Amerício/análise , Berílio/análise , Canadá , Radiometria/métodosRESUMO
Exposure to beryllium (Be) can lead to lung pathologies, such as chronic beryllium disease (CBD). This occupational illness has been more prevalent among dental technicians compared to the non-exposed population. Although most manufacturers state that dental materials are Be-free, this prevalence raises the question of whether the materials are completely devoid of Be-traces. Thus, the objective of the present study was to analyze the elemental composition, with emphasis on Be, of a wide range of commercially available dental materials frequently used by dental laboratories. Samples of 32 different materials were collected and analyzed using inductively coupled plasma-optical emission spectrometry (ICP-OES) and X-ray fluorescence spectroscopy. The results showed that the Be content was below the limit of quantification in all included samples (< 0.00005 mass-%). Therefore, it can be concluded that possible traces of Be were below clinical relevance in dental materials. Exposure of dental technicians to alternative Be sources should be further evaluated.
Assuntos
Berílio , Exposição Ocupacional , Berílio/análise , Espectrometria por Raios X/métodos , Materiais Dentários , Exposição Ocupacional/análiseRESUMO
Knowledge of element concentrations in botanical extracts is relevant to assure consumer protection given the increased interest in plant-based ingredients. This study demonstrates successful multi-element investigations in order to address the lack of comprehensive profiling data for botanical extracts, while reporting for the first time the metallomic profile(s) of arnica, bush vetch, sweet cicely, yellow rattle, bogbean, rock-tea and tufted catchfly. Key element compositions were quantified using a validated HR-ICP-SFMS method (µg kg-1) and were found highly variable between the different plants: Lithium (18-3964); Beryllium (3-121); Molybdenum (75-4505); Cadmium (5-325); Tin (6-165); Barium (747-4646); Platinum (2-33); Mercury (5-30); Thallium (3-91); Lead (12-4248); Bismuth (2-30); Titanium (131-5827); Vanadium (15-1758); Chromium (100-4534); Cobalt (21-652); Nickel (230-6060) and Copper (1910-6340). Compendial permissible limits were not exceeded. Overall, no evidence of a health risk to consumers could be determined from consumption of the investigated plants at reasonable intake rates. Mathematical risk modelling (EDI, CDI, HQ, HI) estimated levels above safe oral thresholds only for Cd (16%) and Pb (8%) from higher intakes of the respective plant-derived material. Following high consumption of certain plants, 42% of the samples were categorised as potentially unsafe due to cumulative exposure to Cu, Cd, Hg and Pb. PCA suggested a potential influence of post-harvest processing on Cr, Ti and V levels in commercially-acquired plant material compared to wild-collected and farm-grown plants. Moreover, a strong correlation was observed between Pb-Bi, Be-V, Bi-Sn, and Tl-Mo occurrence. This study may support future research by providing both robust methodology and accompanying reference profile(s) suitable for the quality evaluation of essential elements and/or metal contaminants in botanical ingredients.
Assuntos
Cádmio , Chumbo , Mercúrio , Bário , Berílio/análise , Bismuto , Cádmio/análise , Cromo/análise , Cobalto , Cobre , Lítio , Mercúrio/análise , Molibdênio , Níquel/análise , Platina , Medição de Risco , Chá , Tálio , Estanho , Titânio , Vanádio/análiseRESUMO
Smart regulation, better regulation, responsive regulation, business-friendly regulation and voluntary 'self-regulation' have their origins deeply embedded in UK policies in the 20th century. Their aim generally is to reduce workplace regulatory obligations on employers. This can overtly or covertly undermine efforts to improve working conditions. In the UK, the historical control and regulation of beryllium (a toxic metal used in industry) illustrates this problem, and as we illustrate through an exploratory analysis of original archival material and official publications. Soft touch regulation of the metal beryllium was developed within the UK semiconductor industry when tighter controls were proposed in the 1960s and 1970s. Historical industry, government and science responses to health and safety information about beryllium provide important lessons for current debates on occupational health and safety.
Assuntos
Exposição Ocupacional , Saúde Ocupacional , Berílio/análise , Indústrias , Exposição Ocupacional/análise , Exposição Ocupacional/prevenção & controle , Tato , Reino UnidoRESUMO
This study aimed to assess the relationship between the content of toxic trace elements, such as aluminum (Al), arsenic (As), beryllium (Be), cadmium (Cd), mercury (Hg), and lead (Pb), in the hair of the adult population of western Kazakhstan and the distance of their residence from oil and gas fields. The cross-sectional study included 850 adults aged 18-60 years. Inductively coupled plasma mass spectrometry was used to measure the level of Al, As, Be, Cd, Hg, and Pb in hair. The relationship between the concentration of toxic trace elements in the hair and the distance from oil and gas fields was assessed in three groups (<16 km, 16-110 km, and >110 km), using multiple linear regression analysis. The highest concentration of Hg = 0.338 µg/g was determined in the group living near oil and gas fields (0-16 km), whereas the lowest concentration of Al = 3.127 µg/g and As = 0.028 µg/g was determined in participants living at a long distance (more than 110 km) (p < 0.001). The concentration of Al (-0.126 (CI: -0.174; -0.077)), Hg (-0.065 (CI: -0.129; -0.001)), and Pb (0.111 (CI: 0.045; 0.177)) is associated with the distance to oil and gas fields. The obtained data indicate a change in the toxic trace element content in the hair of residents in the Caspian region of western Kazakhstan, a change that is most pronounced in residents living in the zone of oil and gas pollution. The distance to the oil and gas fields affects the content of toxic elements in scalp hair. In particular, the concentration of Al and Hg is associated with a decrease in the distance to oil and gas fields, while the concentration of Pb is associated with an increase in the distance to these fields. The lowest content of Al and As was determined in the hair of study participants living in the most remote areas (more than 110 km from oil and gas fields). Our results demonstrate the need for the biomonitoring of toxic elements to determine long-term temporal trends in the impact of chemicals on public health in western Kazakhstan.
Assuntos
Arsênio , Mercúrio , Oligoelementos , Adulto , Alumínio/análise , Arsênio/análise , Berílio/análise , Cádmio/análise , Estudos Transversais , Cabelo/química , Humanos , Cazaquistão , Chumbo/análise , Mercúrio/análise , Oligoelementos/análiseRESUMO
In March 2013, increased 7Be activity concentrations in the atmosphere were observed for successive days in Dazaifu, western Japan. The daily 7Be activity concentration ranged from 0.93 to 14 mBq/m3, with a monthly average of 8.3 mBq/m3. This average was the highest among the monthly averages observed between 1999 and 2015, and higher than the monthly average over this period (4.7 mBq/m3) plus twice the standard deviation. Also, this exceeded the monthly average (6.0 mBq/m3) only for March 1999-2015 (excluding 2013, when the cosmic-ray intensity, a component producing 7Be, decreased). Based on the backward trajectory analysis etc. results, the inflow of air from the stratosphere and upper troposphere at high latitudes that frequently occurred in March 2013 was considered the reason for the 7Be activity concentration increase.
Assuntos
Atmosfera , Berílio , Berílio/análise , JapãoRESUMO
This study aims to develop a 1D model that makes it possible to calculate the daily total 7Be wet deposition flux. For this purpose, long-term (2015-2021), high-frequency (daily) and time-synchronized series of observations of 7Be wet deposition flux and its atmospheric activity concentration are analyzed in this paper. Daily mean 7Be activity concentration in the atmosphere, daily total 7Be wet deposition flux and mean 7Be activity concentration, washout ratio, deposition velocity and scavenging coefficient with individual precipitation events lie in the range of 0.1-17 mBq m-3, 0.8-117.2 Bq m-2 d-1, 0.4-11.3 Bq L-1, 331-3799, 0.2-24.7 cm s-1 and (0.8-35.6) × 10-5 s-1, respectively. Quantitative estimates of the influence of precipitation parameters (amount, intensity and duration) on the daily total 7Be wet deposition flux, mean 7Be activity concentration in precipitation, washout ratio, deposition velocity and scavenging coefficient with individual precipitation events have been obtained using correlation analysis. It has been found that precipitation amount has the greatest influence on 7Be deposition flux and deposition velocity, precipitation intensity has the greatest influence on washout ratio and scavenging coefficient, and precipitation duration has the greatest influence on 7Be activity concentration in precipitation. The relationships between these parameters have been parameterized. Based on these parameterizations, five 1D models that calculate the daily total 7Be wet deposition flux have been introduced and validated against the observation data. It has been revealed that the model, which is based on deposition velocity parameterization and uses the data on 7Be activity concentration in the atmosphere and the daily amount of precipitation as predictors, reproduces the highest fraction of the observational data (88%) with the lowest average calculation error (32%) compared to the other four models.
Assuntos
Poluentes Atmosféricos , Monitoramento Ambiental , Poluentes Atmosféricos/análise , Atmosfera/análise , Berílio/análise , Monitoramento Ambiental/métodos , Radioisótopos/análiseRESUMO
In this study, we examined factors influencing the environmental behaviour of Be, specifically considering soils collected from a legacy radioactive waste disposal site near Sydney (Australia). The precipitation study showed the formation of Be(OH)2 (amorphous) from ICP standard solution, but a mixture of Be(OH)2 (alpha), Be(OH)2 (beta) and ternary Na/S-Be (ΙΙ)-OH(s) solid phase were formed from BeSO4 solutions. The precipitation of Be started at relatively lower pH at higher concentrations than at the lower Be concentration as indicated by both laboratory data and simulation. Across the pH range, the Be sorption curve was divided into three phases, these being pH 3-6, pH 6-10, and pH > 10, within which sorption of Be with soil was 9-97%, 90-97%, and 66-90%, respectively. Beryllium solubility was limited at pH > 7, but a sorption study with soil showed chemisorption under both acidic and alkaline pH (pH 5.5 and 8) conditions, which was confirmed by FTIR and XPS analysis. At pH 5.5 (specifically relevant to the study site), sorption of Be was 72-95%, in which 77% and 46% Be was respectively sorbed by separated fulvic and humic acid fractions. The irreversible chemisorption mechanism was controlled by SOM at higher pH, and by metal oxyhydroxides at lower pH. Both organic and inorganic components synergistically influence the specific chemisorption of Be at the intermediate pH 5.5 of field soil.
Assuntos
Poluentes do Solo , Adsorção , Berílio/análise , Substâncias Húmicas/análise , Concentração de Íons de Hidrogênio , Solo , Poluentes do Solo/análiseRESUMO
Beryllium-7 (Be-7) is one of the naturally occurring radionuclides being monitored under the Global Atmosphere Watch Programme of the World Meteorological Organization. Be-7 mainly originates from cosmic rays. It can be used as a tracer to facilitate understanding of the atmospheric vertical transport by observing its spatial and temporal distribution characteristics. The Hong Kong Observatory has been operating an environmental radiation monitoring programme for decades, and long record of Be-7 activity concentration data in airborne particulate samples are available to characterize the behaviour of Be-7 in the lower atmosphere in Hong Kong. In this study, Be-7 activity concentration data of airborne particulates collected at three locations in Hong Kong from 1993 to 2020 are examined. Temporal variations are analyzed. In particular, the long-term monthly average Be-7 activity concentrations are found to be most sensitive to precipitation. The relevant data analysis, as well as key factors affecting the Be-7 activity concentrations in the lower atmosphere in Hong Kong, will be described.
Assuntos
Monitoramento de Radiação , Berílio/análise , Monitoramento Ambiental , Hong Kong , Radioisótopos/análiseRESUMO
The paper presents the monitoring results of the temporal variability of daily 7Be activity concentration in the atmospheric surface layer at Sevastopol in 2011-2020. The 7Be activity concentration in individual samples of atmospheric aerosols varies from 0.1 to 13.3 mBq m-3 and averages 4.0 ± 2.0 Bq m-3. Higher 7Be activity concentrations have been observed during the period from May to August while lower concentrations have been measured from December to January. Quantitative estimates of the influence of precipitation (amount, duration, intensity) on the temporal variability of 7Be activity concentration have been obtained. It has been found that daily 7Be activity concentration decrease by 2-82% on the first day with precipitation. It has been shown that an increase in precipitation duration and a decrease in its intensity lead to a more significant decrease in the daily 7Be activity concentration. The estimates of the scavenging coefficient have been obtained; the average value is 0.6 ± 1.0 h-1. An increase in the precipitation intensity or amount is accompanied by a decrease in the 7Be scavenging coefficient. Mean 0.5-folding and residence times of 7Be activity concentration in the atmosphere during a moderate rain event are 2.9 ± 2.2 and 15.4 ± 13.6 h, respectively. The recovery of 7Be activity concentration in the atmosphere after precipitation has been investigated. It has been found that this process takes 1-2 days. The mean value of the reload coefficient is 0.94 ± 0.34 d-1. The relationship between the value of the reload coefficient and local meteorological parameters (air temperature, relative humidity, atmospheric pressure, wind speed, surface net solar radiation flux) has been investigated. No statistically significant correlations at a 95% confidence level between the reload coefficient and the considered meteorological parameters have been revealed. Parameterization describing a decrease in the daily 7Be activity concentration in the atmosphere due to precipitation and its recovery during the precipitation-free period has been introduced.
Assuntos
Poluentes Radioativos do Ar , Monitoramento de Radiação , Poluentes Radioativos do Ar/análise , Berílio/análise , Radioisótopos/análise , Estações do AnoRESUMO
Cosmogenic 7Be was used to evaluate soil loss in a mountainous micro-watershed near Belo Horizonte, Southwest Brazil. Two nearby sites were selected, a reference site in a flat area and an eroded site in a hill slope. At the reference site, soil samples were collected monthly throughout the year in order to evaluate seasonal variations of 7Be inventory in soil and its relation with the precipitation regime. Additionally, rainwater was collected and the expected 7Be soil content was predicted. At the reference site, the 7Be inventory shows seasonal variations, in accordance with the rainy season, and its distribution in the soil profile shows an exponential decrease in depth (h0 = 6.9 ± 0.6 kg m-2; r2 = 0.97). At the eroded site, two soil sampling campaigns were performed in order to measure soil erosion in the watershed. The estimated net erosion was 42.2 ± 3.7 t ha-1, indicating the loss of upper 5mm of soil per year. This corresponds to soil losses in the area in the range from moderate to severe erosion.
Assuntos
Berílio/análise , Radioisótopos/análise , Erosão do Solo , Brasil , Chuva , Solo/químicaRESUMO
Understanding the history of the Greenland Ice Sheet (GrIS) is critical for determining its sensitivity to warming and contribution to sea level; however, that history is poorly known before the last interglacial. Most knowledge comes from interpretation of marine sediment, an indirect record of past ice-sheet extent and behavior. Subglacial sediment and rock, retrieved at the base of ice cores, provide terrestrial evidence for GrIS behavior during the Pleistocene. Here, we use multiple methods to determine GrIS history from subglacial sediment at the base of the Camp Century ice core collected in 1966. This material contains a stratigraphic record of glaciation and vegetation in northwestern Greenland spanning the Pleistocene. Enriched stable isotopes of pore-ice suggest precipitation at lower elevations implying ice-sheet absence. Plant macrofossils and biomarkers in the sediment indicate that paleo-ecosystems from previous interglacial periods are preserved beneath the GrIS. Cosmogenic 26Al/10Be and luminescence data bracket the burial of the lower-most sediment between <3.2 ± 0.4 Ma and >0.7 to 1.4 Ma. In the upper-most sediment, cosmogenic 26Al/10Be data require exposure within the last 1.0 ± 0.1 My. The unique subglacial sedimentary record from Camp Century documents at least two episodes of ice-free, vegetated conditions, each followed by glaciation. The lower sediment derives from an Early Pleistocene GrIS advance. 26Al/10Be ratios in the upper-most sediment match those in subglacial bedrock from central Greenland, suggesting similar ice-cover histories across the GrIS. We conclude that the GrIS persisted through much of the Pleistocene but melted and reformed at least once since 1.1 Ma.
Assuntos
Sedimentos Geológicos/análise , Camada de Gelo/química , Dispersão Vegetal , Alumínio/análise , Berílio/análise , Fósseis , Congelamento , Sedimentos Geológicos/química , Groenlândia , Radioisótopos/análiseRESUMO
OBJECTIVES: Beryllium is primarily used in its metallic form, in alloys, or in beryllium oxide ceramics. Its physical and mechanical properties make it useful for many applications across a range of industries. Because beryllium is recognized as a sensitizing and carcinogenic agent, the management of occupational health for workers who may be occupationally exposed to beryllium has long been an important issue in the world. Under these circumstances, the U.S. Occupational Safety and Health Administration (OSHA) had published a rule in January 2017, to prevent the development of chronic beryllium disease and lung cancer. This rule strengthens the regulations governing the use of beryllium and its compounds. With the announcement of the OSHA rule in January 2017, the purpose of this study is to gain insight into the health problems and industrial hygiene associated with the use of beryllium and share the issues related to the management of occupational health for persons working with beryllium in Japan. METHODS: We collected information regarding the beryllium industry, beryllium exposure, beryllium-induced health disorders, OSHA rule of January 2017, and regulations for beryllium use in Japan. After reviewing them, we discussed the issues concerning occupational health management of workers exposed to beryllium in Japan. RESULTS: It has been reconfirmed that in recent years, the most serious health problem due to beryllium exposure is chronic beryllium disease caused by beryllium sensitization. Management of occupational health that emphasizes reduction of beryllium sensitization and early detection of beryllium-sensitized workers is important. CONCLUSIONS: It was suggested that the following should be considered as the issues of management of occupational health of workers exposed to beryllium in Japan: (1) Collect epidemiologic data on health hazards from beryllium exposure in Japan. (2) Review the diagnostic items of special medical check-ups. (3) Review the definition of beryllium and its compounds in the Ordinance on Prevention of Hazards due to Specified Chemical Substances.
Assuntos
Beriliose/etiologia , Beriliose/prevenção & controle , Berílio/efeitos adversos , Doenças Profissionais/etiologia , Doenças Profissionais/prevenção & controle , Exposição Ocupacional/efeitos adversos , Saúde Ocupacional , Local de Trabalho , Beriliose/diagnóstico , Beriliose/epidemiologia , Berílio/análise , Doença Crônica , Feminino , Humanos , Japão , Neoplasias Pulmonares/diagnóstico , Neoplasias Pulmonares/etiologia , Neoplasias Pulmonares/prevenção & controle , Masculino , Doenças Profissionais/diagnóstico , Doenças Profissionais/epidemiologia , Exposição Ocupacional/análise , Saúde Ocupacional/tendênciasRESUMO
BACKGROUND: Chronic beryllium disease (CBD), a granulomatous disease with similarities to sarcoidosis, arises only in individuals exposed to beryllium. Inhaled beryllium can elicit a T-cell-dominated alveolitis leading nonnecrotizing granulomata. CBD can be distinguished from sarcoidosis by demonstrating beryllium sensitization in a lymphocyte proliferation test. RESEARCH QUESTION: Beryllium exposure usually occurs in an occupational setting. Because of the diagnosis of CBD in a patient without evident beryllium exposure, we performed a beryllium-lymphocyte proliferation test (BeLPT) among his work colleagues. STUDY DESIGN AND METHODS: This field study investigated a cohort of work colleagues without obvious beryllium exposure. Twenty-one of 30 individuals were assessed in our outpatient clinic for beryllium sensitization. Therefore, BeLPT was performed with freshly collected peripheral blood mononuclear cells. Data were extracted from clinical charts, including geographical data. Beryllium content in dust samples collected at the workplace was measured by graphite-furnace atomic absorption spectroscopy and was compared with samples from different areas of Germany. RESULTS: For the initial patient, the diagnosis of sarcoidosis was reclassified as CBD based on two positive BeLPT results. Assessment of his workplace did not identify a source of beryllium. However, BeLPTs performed on his workmates demonstrated beryllium sensitization in 5 of 21 individuals, suggesting a local beryllium source. Concrete dust obtained from the building yard, the workplace of the index patient, contained high amounts of beryllium (1138 ± 162 µg/kg), whereas dust from other localities (control samples) showed much lower beryllium content (range, 147 ± 18-452 ± 206 µg/kg). Notably, the control dust collected from different places all over Germany exhibit different beryllium concentrations. INTERPRETATION: We describe a cluster of beryllium-sensitized workers from an industry not related to beryllium caused by environmental exposure to beryllium-containing concrete dust, which exhibited markedly elevated beryllium content. Importantly, analyses of dust samples collected from different localities showed that they contain markedly different amounts of beryllium. Thus, besides workplace-related exposure, environmental factors also are capable of eliciting a beryllium sensitization.
Assuntos
Beriliose , Berílio , Poeira/análise , Exposição Ambiental , Granuloma do Sistema Respiratório , Ativação Linfocitária/imunologia , Sarcoidose Pulmonar/diagnóstico , Adulto , Beriliose/diagnóstico , Beriliose/etiologia , Beriliose/imunologia , Beriliose/prevenção & controle , Berílio/análise , Berílio/toxicidade , Indústria da Construção , Diagnóstico Diferencial , Exposição Ambiental/efeitos adversos , Exposição Ambiental/análise , Feminino , Alemanha/epidemiologia , Granuloma do Sistema Respiratório/induzido quimicamente , Granuloma do Sistema Respiratório/diagnóstico , Humanos , Testes Imunológicos/métodos , Leucócitos Mononucleares , Masculino , Conglomerados Espaço-Temporais , Local de Trabalho/normasRESUMO
The problem of handling nuclear power plant irradiated structural materials holds one of the central places in the nuclear power industry. High toxic 10Be with a half-life of T1/2 = 1.6 × 106 years is discovered in NPP structural materials after reactor operating. 10Be decays through only electrons' emission. Pure beta emitters are extremely difficult to determine in irradiated structural materials and radioactive waste. We proposed a photoactivation approach for determining the 10Be activity in NPP samples. The proposed method involves determining 9Be and 10B concentrations and subsequent recalculation of 10Be activity formed in 9Be(n, γ)10Be and 10B(n, p)10Be reactions. The amount of 9Be and 10B is determined by samples' photoactivation using an electron accelerator and 9Be(γ, 2n)7Be-, 10B(γ, p2n)7Be-reactions. These reactions' experimental yields were measured for 20, 40, and 55 MeV boundary energies of the bremsstrahlung beam. The proposed technique was tested on samples of ChNPP 2nd unit irradiated structural materials. The technique's calculated error is about 15-20%; the sensitivity is 1 Bq × g-1.
Assuntos
Berílio/análise , Materiais de Construção , Monitoramento de Radiação , Resíduos Radioativos , Elétrons , Centrais NuclearesRESUMO
Analysis of a twenty-year (1998-2018) data series on 7Be concentrations in weekly collected aerosol samples in northern Poland showed a clear pattern of seasonal changes in 7Be with a maximum in the summer period associated with the most intensive thermal convection and vertical mixing. Activity concentrations of 7Be ranged from 480 µBq m-3 to 9370 µBq m-3. A strong relationship has been shown between 7Be concentrations observed in years and the activity of the Sun related to the sunspot number. Activity concentrations of 210Pb in aerosol ranged from 17 µBq m-3 to 1490 µBq m-3 with maximum occurring in the winter. The difference in the seasonal pattern in 7Be and 210Pb concentrations were directly related to the different sources of both isotopes, as an additional source of 210Pb was the products of combustion during the heating season. Similar pattern with maximum concentrations in winter was observed for PM10, as the main source is the same as in the case 210Pb. A content of PM10 was in the range from 6.5 to 81.7 µg m-3. A statistically significant correlation between both isotopes occurs. At the same time, 7Be, 210Pb and PM10 are visibly related to the dust concentrations ranged from 7.3 µg m-3 in winter to 134.8 µg m-3 in spring. Statistical analysis carried out with simple regression model, stepwise multiple regression, and Random Forest models showed that the sunspots number, air temperature and sunshine duration have the most substantial impact on transport, and hence the concentration of 7Be in the surface layer of the atmosphere. The increase in relative humidity and precipitation and higher wind speed have a statistically significant effect on the reduction of 7Be concentrations in surface air.