Tetraphenylborate enhanced enzymatic production of γ-cyclodextrin: System construction and its mechanism.

γ-Cyclodextrin (γ-CD) is an attractive material among the natural cyclodextrins owing to its excellent properties. γ-CD is primarily produced from starch by γ-cyclodextrin glycosyltransferase (γ-CGTase) in a controlled system. However, difficulty in separation and low conversion rate leads to high production costs for γ-CD. In this study, γ-CGTase from Bacillus sp. G-825-6 STB17 was used in γ-CD production from cassava starch. With the introduction of sodium tetraphenylborate (NaBPh4), the total conversion rate was promoted from an initial 18.07 % to 50.49 % and the γ-CD ratio reached 78.81 % with a yield of 39.79 g/L. Furthermore, the mechanism was conducted via the determination of binding constant, which indicated that γ-CD exhibited much stronger binding strength with NaBPh4 than ß-CD. The reformation of water molecules and the chaotropic effect might be the main driving forces for the interaction. Additionally, the conformations of CD complexes were depicted by NMR and molecular docking. The results further verified different binding patterns between CDs and tetraphenylborate ions, which might be the primary reason for the specific binding. This system not only guides γ-CD production with an efficient and easy-to-remove production aid but also offers a new perspective on the selection of complexing agents in CD production.

Effectiveness of Three Bleaching Techniques for Endodontically Treated Teeth: A Randomized Clinical Trial.

BACKGROUND: Various techniques, products, and protocols are used for the bleaching of non-vital teeth. The walking bleach technique involves sealing the bleaching agent in the pulp chamber. In the inside/outside technique, a low-concentration bleaching agent is applied at home using a custom tray. In the in-office technique, a high-concentration bleaching agent is applied by a dental professional. Limited research has compared the effectiveness of these techniques. OBJECTIVE: This clinical trial aimed to evaluate the effectiveness of the walking bleach, the inside/outside, and the in-office bleaching techniques. METHODS AND MATERIALS: Fifty-four discolored teeth were selected according to eligibility criteria, randomized, and assigned to three treatment groups (n=18): walking bleach (sodium perborate - SP), inside/outside bleaching (7.5% hydrogen peroxide -HP7.5), and in-office bleaching (35% hydrogen peroxide - HP35). A cervical seal was placed in all the teeth, and nonvital bleaching was performed according to each technique. The CIELab color coordinates were measured using a clinical spectrophotometer at baseline, weekly, and at the 1-week follow-up. ΔE00 and ΔWID were calculated between the baseline and each evaluation time point. The ANOVA, Fisher exact, and Kruskal-Wallis tests were used to compare the quantitative variables, and the Fisher exact test, to determine the association among categorical variables. Bleaching effectiveness was interpreted by 50:50% perceptibility and acceptability thresholds. RESULTS: As the treatment progressed, all techniques presented a significant increase in L* and WID (p<0.001), and a significant decrease in a* and b* (p<0.001). HP7.5 and HP35 presented greater increases in WID mean values, in comparison with SP (p=0.006). No significant differences were observed among the techniques for ΔE00 after treatment completion (p=0.383). There were no statistical differences in bleaching effectiveness among the techniques after treatment completion (p=0.098). CONCLUSION: All techniques presented excellent effectiveness after treatment completion. However, HP7.5 and HP35 techniques provided a more rapid whitening response.

Lignin-based vitrimer containing dynamic borate ester bonds with intrinsic photoconversion and excellent photothermal remoldability.

The development of photoresponsive shape memory materials based on the photothermal conversion properties of lignin and the low activation energy of the dynamic covalent borate bond is of great importance. In this paper, a kind of lignin-based vitrimer polymer (LBP) containing dynamic boronic ester bonds was prepared by a "sulfhydryl-epoxy" click reaction and etherification reaction. The results show that the rigid segment EP-EL (lignin-based epoxy resin) and BDB (2,2'-(1,4-phenylene)-bis-[4-mercapto-1,3,2-dioxaneborane]) with benzene ring structure can impart tensile strength (20.8 MPa) to the LBP, while the flexible segment PEG imparts good elongation at break (15 %). The dynamic binding and dissociation exchange mechanism of the boronic ester bonds enables LBP to exhibit thermal remodelling properties (up to 36.2 %) and water-assisted self-healing properties at room temperature (up to 49.0 %). In addition, LBP exhibits excellent thermal and light-responsive shape memory properties due to its own photothermal conversion performance (photothermal conversion efficiency up to 18.2 %) and the dynamic boronic ester bond thermal activation bond exchange mechanism. The insulating properties of LBP make it suitable for use in high temperature protection circuit devices and light-responsive circuit devices. This study provides new insights into the design and application of Vitrimer and photoresponsive shape memory polymers, and also offers a new avenue for high-value utilization of lignin.

Borate bioactive glass enhances 3D bioprinting precision and biocompatibility on a sodium alginate platform via Ca2+ controlled self-solidification.

Sodium alginate (SA) has gained widespread acclaim as a carrier medium for three-dimensional (3D) bioprinting of cells and a diverse array of bioactive substances, attributed to its remarkable biocompatibility and affordability. The conventional approach for fabricating alginate-based tissue engineering constructs entails a post-treatment phase employing a calcium ion solution. However, this method proves ineffectual in addressing the predicament of low precision during the 3D printing procedure and is unable to prevent issues such as non-uniform alginate gelation and substantial distortions. In this study, we introduced borate bioactive glass (BBG) into the SA matrix, capitalizing on the calcium ions released from the degradation of BBG to incite the cross-linking reaction within SA, resulting in the formation of BBG-SA hydrogels. Building upon this fundamental concept, it unveiled that BBG-SA hydrogels greatly enhance the precision of SA in extrusion-based 3D printing and significantly reduce volumetric contraction shrinkage post-printing, while also displaying certain adhesive properties and electrical conductivity. Furthermore, in vitro cellular experiments have unequivocally established the excellent biocompatibility of BBG-SA hydrogel and its capacity to actively stimulate osteogenic differentiation. Consequently, BBG-SA hydrogel emerges as a promising platform for 3D bioprinting, laying the foundation for the development of flexible, biocompatible electronic devices.

A bioactive self-healing hydrogel wound-dressing based on Tragacanth gum: Structural and invitro biomedical investigations.

The design and development of wound-dressing hydrogels with desirable therapeutic effects and proper mechanical and self-healing properties are crucial in the healthcare sector. This research aims to prepare a new self-healing hydrogel based on Tragacanth, polyvinyl alcohol, and borax to be used as a wound dressing, the hydrogel was first prepared through a simple and one-pot reaction. The efficiency of the resulting product was then assessed based on the rheological and self-healing tests as well as cellular tests on a mouse fibroblast cell line (L929) including toxicity and scratch tests as well as the investigation of the expression of TGFß1, TGFß2, and VEGF-A gens (using Real-time PCR). The synthesized hydrogel exhibited proper mechanical strength, high self-healing features, and no toxicity (cell viability >100 %). Rheological studies indicate that hydrogels with a higher borax content (PVA: B ratio of 5:1) exhibit a higher storage modulus across all frequencies. The presence of hydrogel improved the migration of the L929 cells and scratch healing. The hydrogel also caused a significant improvement in the expression of the growth factors of the genes (P < 0.001). Therefore, it can be concluded that the prepared wound dressing can actively contribute to wound healing, opening promising potentials in medical applications.

PVC membrane bulk optode incorporating 4-nitrobenzo-15-crown-5 and sodium tetrakis(1-imidazolyl) borate for the pico-molar determination of silver ion in pharmaceutical formulation.

Silver ion (Ag+) is of harmful effects to both environment and human health. Ag+ soluble compounds and salts is used in treating mental illness, epilepsy, nicotine addiction, gastroenteritis, and infectious diseases, including syphilis and gonorrhea, and as anti-infective dermatological agent for controlling nose bleeding. However, high Ag+ doses cause several harmful effects to human health such as irreversible pigmentation of skin and eye, and problems to liver and kidney. A bulk membrane Optode is proposed in this work to measure the Ag+ concentration in the pharmaceutical formulations. The membrane optode is prepared from the ionophore 4-nitobenzo-15-crown-5, the ion-exchanger sodium tetrakis (imidazolyl) borate, the plasticizer o-nitrophenyl octyl ether, and the chromoionophore ETH 5294; these components are dissolved in the PVC/THF slurry to form the membrane. The optode is studied by atomic force microscope and UV-visible spectrophotometer, and its spectrum exhibits two maximum wavelengths of 550 and 665 nm, and response for Ag+ at these maximum wavelengths is reproducible in the concentration range of 10-11 to 10-8 M using acetate buffer of pH 5.0, with very low detection limit of 8.8 × 10-12 M. The most important feature in this work is the selectivity improvement for Ag+ over all interfering ions; the selectivity coefficient logarithm logK A g + , c a t i o n opt is found to be - 4.3 for Cu2+, - 5.6 for Ni2+ and - 5.0 for Cd2+. The response mechanism is studied by FTIR, and it depends on ion-exchange of Ag+ and sodium imidazolyl borate, followed by the host-guest complexation between Ag+ and the crown ionophore, which is accompanied by concomitant deprotonation of the chromoionphore. The optode has a response time of 2-3 min within lifetime of 10 days with the same response. The optode can be applied successfully for Ag+ determination in the pharmaceutical formulation, PinkEye Relief® eye drop, which is used for treating inflammation, redness and water discharge of the eye; the high recovery and low standard deviation of the results using calibration curve method confirm the accuracy and precision of the proposed optode for its application in real samples.

Microwave-assisted fabrication of nanostructured borate bioactive glass and its bioactivity.

Sol-gel bioactive glass with nanocrystalline structures has demonstrated enhanced bioactivity and acceptance by the surrounding bone tissue. In particular, borate bioactive glasses exhibit higher reactivity and apatite formation under the simulated in vitro and in vivo conditions. This study presents a microwave-assisted synthesis of borate bioactive glass (58S) and an understanding of its structural and in vitro bioactivity. By this synthesis method, the nanocrystalline structures formed within the amorphous matrix will regulate the degradation rate of the glass network during apatite formation. The calcinated borate bioactive glass features a nanorod crystalline hydroxyapatite structure embedded in the amorphous borate glass network. The formation of apatite on the surface of borate bioactive glass within 6 hours of immersion in simulated body fluid confirms the material's enhanced bioactivity and reactivity. Anti-oxidant studies, cell viability, and alkaline phosphate activity further corroborate the bioactivity of borate bioactive glass. In summary, this study highlights the significant potential of microwave-synthesized borate bioactive glass for a wide range of bone tissue engineering applications.

Impact of bismuth oxide on structural, optical and gamma-ray shielding properties of calcium-sodium-borate glasses.

In the present study, we have prepared six glass samples of bismuth borate using the melt-quenching method with the composition (70-x)B2O3-10CaO-20Na2O-xBi2O3; x = 0, 3, 6, 9, 12 and 15 mol%. The density of the prepared glasses was determined using Archimedes principle. The X-ray diffraction patterns provide confirmation of the amorphous nature of the prepared samples, whereas the Fourier transform infrared measurements pointed to the existence of structural units like BO3, BO4, BiO3 and BiO6 within the glass network. An assessment of the optical absorption spectra unveiled that with the increase in the bismuth oxide content, there was a decrease observed in both the direct and indirect band gap energies. Specifically, they decreased from 3.40 to 2.79 eV and from 3.10 to 2.46 eV, respectively. The properties related to gamma ray attenuation, including the mass attenuation coefficient (µm), effective atomic number (Zeff), half-value layer (HVL) and mean free path (MFP), were examined for all the glass samples. This investigation was carried out using the Phy-X/PSD software, covering the energy range from 0.511 to 1.332 MeV. Out of all the samples, Bi-15, featuring the highest Bi2O3 content, demonstrated the highest µm, Zeff, the smallest HVL and MFP. These results suggest that the glass with 15 mol% of Bi2O3 offers the most effective gamma radiation shielding performance. Moreover, the glasses examined in this study exhibit superior radiation shielding characteristics compared with specific concrete types, namely, ordinary concrete, Hematite serpentine concrete and barite concrete, as well as commercial glasses such as RS-360 and RS-253.

Eco-friendly hydrogel based on locust bean gum for water retaining in sandy soil.

Sandy soils are suffering from water loss and desertification, which severely restrict the development of local agriculture. In this work, an eco-friendly hydrogel composed of borax and locust bean gum was synthesized to enhance the water retention capacity of sandy soil and support agricultural development in arid regions. Locust bean gum/borax hydrogel with a 3D network structure exhibited great water-absorbing capacity (130.29 g/g) within 30 min. After mixing 0.9 wt% hydrogel with sandy soil, the maximum soil water content, water retention time, soil porosity and soil organic matter were increased by 32.03 %, 14 days, 38.9 % and 8.64 g/kg respectively. Little effect on soil microorganisms revealed barely toxicity. Furthermore, the hydrogel was confirmed to be biodegradable at 43.47 % after 4 weeks. According to the study, locust bean gum/borax hydrogel possesses good water absorbing capacity, soil water retention ability, soil optimization ability and low adverse environmental impact. Together, it is inferred that the hydrogel can improve the water retention capacity of sandy soil in arid areas, promoting plant growth in arid areas.

Development of PHBV electrospun fibers containing a borate bioactive glass doped with Co, Cu, and Zn for wound dressings.

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibers embedded with borate glasses of 45B5 composition doped with Co2+, Cu2+, and Zn2 +(46.1 B2O326.9-X CaO24.4 Na2O2.6 P2O5, X CoO/CuO/ZnO mol % (X = 0-5)) were produced by electrospinning for wound healing applications. Prior to their addition, the glasses exhibited two broad halos typical of a vitreous borate network, which were mainly composed of ring-type metaborate structural units. The particle distribution in the PHBV nanofibers embedded with 45B5 borate bioactive glasses is present in isolated and agglomerated states, being partially coated by a polymeric layer-except for the cobalt-doped glass, which resulted in a successful encapsulation with 100% embedding efficiency. The incorporation of the glasses reduced the PHBV crystallinity degree and its decomposition temperature, as well as its mechanical properties, including Young's modulus, tensile strength, and elongation at break. The neat PHBV fibers and those containing the cobalt-doped glasses demonstrated great cytocompatibility with human keratinocytes (HaCat), as suggested by the high cell viability after 7 days of exposure. Further studies are needed to fully understand the wound healing potential of these fibers, but our results significantly contribute to the area.

Enhanced boron removal via seed-induced crystal growth of barium perborate in sequential fluidized-bed crystallization.

Chemical oxo-precipitation (COP) is an enhanced precipitation method for boron removal with the conversion of boric acid to perborate anions. When using barium-based precipitant, the boron can be effectively precipitated as barium perborates (BaPBs). The phase transformation of BaPBs from amorphous (A-BaPB, Ba(B(OH)3OOH)2) to crystalline (C-BaPB, BaB2(OO)2(OH)4) form is crucial for effective boron removal. However, scaling up this phase transformation of BaPBs is hindered by poor diffusion. This study aims to promote the growth of C-BaPB through seed-induced crystal growth, eliminating the need for phase transformation. By examining the relationship between crystal growth rate and supersaturation, surface spiral growth was identified as the rate-limiting step of the growth of micron-sized seeds near pHpzc. To enable continuous crystal growth, granular seeds of C-BaPB were prepared and employed as the medium for fluidized-bed crystallization (FBC). The system reached steady state 3 hydraulic retention times, achieving 90% boron removal. The effect of surface loading, ionic strength, and dosages on steady-state crystal growth rate was studied, revealing a shift of the rate-limiting step in FBC to diffusion. Lastly, the system that constituted of two FBCs in-series for sequential crystallization of A-BaPB and C-BaPB was demonstrated. The integrated system provided 97.8% of boron removal from synthetic wastewater containing 500 mg-B/L, with 92.3% of boron crystallized on the granular seeds of BaPBs.

Performance of magnetic nanocomposite based on xanthan gum-grafted-poly(acrylamide) crosslinked by borax for the effective elimination of amoxicillin from aquatic environments.

This study evaluated the effectiveness of using nanocomposite (NCs) of xanthan gum grafted polyacrylamide crosslinked Borax - iron oxide nanoparticle (XG-g-pAAm-CL-Borax-IONP) to remove the amoxicillin antibiotic (AMX) from an aquatic environment. To confirm the structural characteristics of the prepared XG-g-pAAm-CL-Borax-IONP NCs, unique characterization methods (XRD, FT-IR, FE-SEM, EDX, BET, TGA, Zeta, and VSM) were used. Adsorption experimental setups were performed with the influence of solution pH (4-9), the effect of adsorbent dose (0.003-0.02 g), the effect of contact time (5-45 min), and the effect of initial AMX concentration (50-400 mg/L) to achieve the most efficient adsorption conditions. Based on the Freundlich isotherm model, XG-g-pAAm-CL-Borax-IONP NCs provided the maximum AMX adsorption capacity of 1183.639 mg/g. This research on adsorption kinetics also established that the pseudo-second-order model (R2 = 0.991) is outstanding compatibility with the experimental results. AMX adsorption on the NCs may occur through intermolecular hydrogen bonding, diffusion, and trapping into the polymer network. Even after five cycles, these NCs still displayed the best performance. Based on these results, XG-g-pAAm-CL-Borax-IONP NCs may be a viable material for the purification of AMX from contaminated water.

Intermittent multi-generational reproductive toxicities of 1-alkyl-3-methylimidazolium tetrafluoroborate with essential involvement of lipid metabolism.

Ionic liquids (ILs) become emerging environmental pollutants. Especially, alkyl imidazolium ILs commonly showed stimulation in toxicological studies and mechanisms remained to be explored. In the present study, alkyl imidazolium tetrafluoroborate ([amim]BF4), with ethyl ([emim]), hexyl ([hmim]) and octyl ([omim]) as side-chains, were chosen as target ILs. Their toxicities on the reproduction and lifespan of Caenorhabditis elegans were explored with two types (A and B) exposure arrangements to mimic realistic intermittent multi-generational exposure scenarios. In type A scenario, there was an exposure every 4 generations with 12 generations in total, and in type B one, there was an exposure every two generations with 12 generations in total. Result showed that [emim]BF4 caused inhibition on the reproduction in 8 generations in type A exposure but 6 ones in type B exposure. Meanwhile, [hmim]BF4 showed inhibition in one generation and stimulation in 3 generations in type A exposure, but stimulation in 6 generations in type B exposure. Also, [omim]BF4 showed stimulation in one generation in type B exposure. Collectively, the results demonstrated less frequencies of inhibition, or more frequencies of stimulation, in the exposure scenario with more frequent exposures. Further mechanism exploration was performed to measure the lipid storage and metabolism in the aspect of energy supply. Results showed that [emim]BF4, [hmim]BF4 and [omim]BF4 commonly stimulated the triglyceride (TG) levels across generations. They also disturbed the activities of glycerol-3-phosphate acyltransferase (GPAT) and acetyl CoA carboxylase (ACC) in lipogenesis, those of adipose triglyceride lipase (ATGL) and carnitine acyl transferase (CPT) in lipolysis, and also the contents of acetyl-CoA (ACA). Further data analysis indicated the energy allocation among life traits including reproduction, antioxidant responses and hormone regulations.

Dual-ROS-scavenging and dual-lingering nanozyme-based eye drops alleviate dry eye disease.

Efficiently removing excess reactive oxygen species (ROS) generated by various factors on the ocular surface is a promising strategy for preventing the development of dry eye disease (DED). The currently available eye drops for DED treatment are palliative, short-lived and frequently administered due to the short precorneal residence time. Here, we developed nanozyme-based eye drops for DED by exploiting borate-mediated dynamic covalent complexation between n-FeZIF-8 nanozymes (n-Z(Fe)) and poly(vinyl alcohol) (PVA) to overcome these problems. The resultant formulation (PBnZ), which has dual-ROS scavenging abilities and prolonged corneal retention can effectively reduce oxidative stress, thereby providing an excellent preventive effect to alleviate DED. In vitro and in vivo experiments revealed that PBnZ could eliminate excess ROS through both its multienzyme-like activity and the ROS-scavenging activity of borate bonds. The positively charged nanozyme-based eye drops displayed a longer precorneal residence time due to physical adhesion and the dynamic borate bonds between phenyboronic acid and PVA or o-diol with mucin. The in vivo results showed that eye drops could effectively alleviate DED. These dual-function PBnZ nanozyme-based eye drops can provide insights into the development of novel treatment strategies for DED and other ROS-mediated inflammatory diseases and a rationale for the application of nanomaterials in clinical settings.

Self-Healing Guar Gum-Based Nanocomposite Hydrogel Promotes Infected Wound Healing through Photothermal Antibacterial Therapy.

Preventing bacterial infections is a crucial aspect of wound healing. There is an urgent need for multifunctional biomaterials without antibiotics to promote wound healing. In this study, we fabricated a guar gum (GG)-based nanocomposite hydrogel, termed GBTF, which exhibited photothermal antibacterial therapy for infected wound healing. The GBTF hydrogel formed a cross-linked network through dynamic borate/diol interactions between GG and borax, thereby exhibiting simultaneously self-healing, adaptable, and injectable properties. Additionally, tannic acid (TA)/Fe3+ nanocomplexes (NCs) were incorporated into the hydrogel to confer photothermal antibacterial properties. Under the irradiation of an 808 nm near-infrared laser, the TA/Fe3+ NCs in the hydrogel could rapidly generate heat, leading to the disruption of bacterial cell membranes and subsequent bacterial eradication. Furthermore, the hydrogels exhibited good cytocompatibility and hemocompatibility, making them a precandidate for preclinical and clinical applications. Finally, they could significantly promote bacteria-infected wound healing by reducing bacterial viability, accelerating collagen deposition, and promoting epithelial remodeling. Therefore, the multifunctional GBTF hydrogel, which was composed entirely of natural substances including guar gum, borax, and polyphenol/ferric ion NCs, showed great potential for regenerating infected skin wounds in clinical applications.

Biologically active sodium pentaborate pentahydrate and Hypericum perforatum oil loaded polyvinyl alcohol: chitosan membranes.

In this study, sodium pentaborate pentahydrate (NaB) and Hypericum perforatum (HP) oil were incorporated into polyvinyl alcohol (PVA) and chitosan (CH) polymer blend to obtain membranes by solution casting method. In order to see the synergistic effects of NaB and HP oil on the biological and physical properties of the membranes NaB and HP oil were incorporated into membrane matrix in different ratios. Fourier-transform infrared spectroscopy (FTIR) results showed that no significant bond formation between the bioactive components and the PVA:CH matrix. According to mechanical test results, Young's Modulus and elongation at break decreased from 426 MPa to 346 MPa and 52.23 % to 15.11 % for neat PVA:CH membranes and NaB and HP oil incorporated PVA:CH (PVA:CH@35NaB:HP) membranes, respectively. Antimicrobial activity tests have shown the membranes were over 99 % effective against Escherichia coli, Staphylococcus aureus, and Candida albicans, underlining their potential for infection control. Cytocompatibility assay performed with Human Dermal Fibroblast (HDFa) cells highlight the biocompatibility of the membranes, revealing 74.84 % cell viability after 72 h. The properties of NaB and HP oil doped PVA:CH based membranes obtained from these experiments reveal the promise of a versatile membrane for applications in wound healing, tissue engineering and other biomedical fields.

Investigation of Osteomyelitis Inducing Methicillin-Resistant Staphylococcus aureus Inhibition Effect by Strontium-Substituted Borate Bioactive Glasses.

Borate glass transforms into hydroxycarbonate apatite more rapidly than silicate glass. This research aims to evaluate strontium's structural and biological effects on borate bioactive glass (BBG) and the influence of strontium concentrations (0%, 5%, 10%, and 15% Sr) prepared via the sol-gel method. The study reveals significant findings related to the physicochemical properties of the glass. Immersion of the glass powders in a simulated body fluid (SBF) led to the development of a hydroxyapatite (HAP) layer on the glass surfaces. This transformation was verified through X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) analyses. In particular, 5% strontium exhibited gradual degradation, resulting in particle sizes below 100 nm. The BBG-15%Sr demonstrates heightened pathogenic activity as it shows a significant inhibition zone of 14 mm at 250 µg/mL, surpassing other substituted BBGs. It effectively combats Gram-positive bacteria, completely inhibiting MRSA growth at 50 µg/mL. This underscores its robust biofilm disruption capabilities, eradicating biofilms, even at minimal concentrations after prolonged exposure. C. elegans when subjected to BBG-15%Sr shows less ROS production when compared with the others. Moreover, the results suggest that the modified glass could be a potential material for the treatment of osteomyelitis-affected bone repair.

Development of an innovative eugenol and borax-based orodispersible film for enhanced treatment of mouth ulcers.

Orodispersible films (ODFs) have emerged as an advanced and patient-friendly delivery system due to ease of administration, improved patient compliance, quick release and taste-masking of active pharmaceutical ingredients. This research reports the preparation of the ODF containing eugenol and borax (EB-ODF) by a solvent casting technique for treating mouth ulcers. The EB-ODF consisted of vinyl pyrrolidone/vinyl acetate copolymer (Kollidon® VA64, VA64) and hydroxypropyl methylcellulose (HPMC-K250) as the film formers where eugenol and borax were loaded. The thickness of the EB-ODF obtained was 0.119 ± 0.001 mm and the tensile strength was 13.1 ± 1.1 N/mm2 (p > 0.05). The prepared films disintegrated in the oral cavity within 30 s and over 90% of the eugenol was released from the film in the first 5 min. Furthermore, the combined application of eugenol and borax, loaded in EB-ODF, displayed notable synergetic antibacterial property against both gram-negative and gram-positive bacteria. In an in-vivo study on a rat model with chemical burn-induced oral ulcers, the EB-ODF treatment group had a 100% reduction in ulcer area (p > 0.05) after 10 days of treatment and demonstrated a 38.7% higher reduction in oral ulcer area compared to the Dingpeng Cream treatment group (p < 0.0001). The EB-ODF treatment group showed minimal oral irritation, scoring only 1 point and a 65% preference in the taste tests (p < 0.0001). In summary, EB-ODF had successfully overcome the poor palatability of commercially available formulation and provided notable potential for further ulcer treatment product development.

Detection of H2O2 and catalase on a paper-based flow sensor constructed with borate cross-linked PVA hydrogel.

The detections of H2O2 and catalase play an important role in daily life. This study introduces a paper-based flow sensor that is specifically designed to detect H2O2 and catalase. The sensor utilizes a hydrogel composed of cross-linked 4-carboxyphenylboronic acid and polyvinyl alcohol. When H2O2 is in contact with the hydrogel, the B-C bonds of the hydrogel undergo a reactive process, causing decomposition of the hydrogel. The pH indicator strip enables the visual monitoring of the viscosity change that occurs during the gel-sol transition. The quantification of H2O2 is accomplished by assessing the proportion of water coverage on the pH indicator strip. The sensor shows a detection limit of 0.077 wt% and is applicable for the quantitative measurement of H2O2 in routinely used disinfectants. Furthermore, the presence of catalase is effectively identified and the detection of catalase in milk is successfully fulfilled. In summary, this work proposes a simple, user-friendly, label-free, and cost-effective method for constructing a paper-based flow sensor using borate cross-linked polyvinyl alcohol hydrogel, showing great potential for detecting H2O2 and catalase in various practical scenarios.

Size and Polarizability of Boron Cluster Carriers Modulate Chaotropic Membrane Transport.

Perhalogenated closo-borates represent a new class of membrane carriers. They owe this activity to their chaotropicity, which enables the transport of hydrophilic molecules across model membranes and into living cells. The transport efficiency of this new class of cluster carriers depends on a careful balance between their affinity to membranes and cargo, which varies with chaotropicity. However, the structure-activity parameters that define chaotropic transport remain to be elucidated. Here, we have studied the modulation of chaotropic transport by decoupling the halogen composition from the boron core size. The binding affinity between perhalogenated decaborate and dodecaborate clusters carriers was quantified with different hydrophilic model cargos, namely a neutral and a cationic peptide, phalloidin and (KLAKLAK)2. The transport efficiency, membrane-lytic properties, and cellular toxicity, as obtained from different vesicle and cell assays, increased with the size and polarizability of the clusters. These results validate the chaotropic effect as the driving force behind the membrane transport propensity of boron clusters. This work advances our understanding of the structural features of boron cluster carriers and establishes the first set of rational design principles for chaotropic membrane transporters.