In vivo profiling of phytocannabinoids in Cannabis spp. varieties via SPME-LC-MS analysis.

BACKGROUND: In vivo solid-phase microextraction (SPME) is a minimally invasive, non-exhaustive sample-preparation technique that facilitates the direct isolation of low molecular weight compounds from biological matrices in living systems. This technique is especially useful for the analysis of phytocannabinoids (PCs) in plant material, both for forensic purposes and for monitoring the PC content in growing Cannabis spp. plants. In contrast to traditional extraction techniques, in vivo SPME enables continuous tracking of the changes in the level of PCs during plant growth without the need for plant material collection. In this study, in vivo SPME utilizing biocompatible C18 probes and liquid-chromatography coupled to quadrupole time-of flight mass spectrometry (LC-Q-TOF-MS) is proposed as a novel strategy for the extraction and analysis of the acidic forms of five PCs in growing medicinal cannabis plants. RESULTS: The SPME method was optimized by testing various parameters, including the extraction phase (coating), extraction and desorption times, and the extraction temperature. The proposed method was validated with satisfactory analytical performance regarding linearity (10-3000 ng/mL), limits of quantification, and precision (relative standard deviations below 5.5 %). The proposed method was then successfully applied for the isolation of five acidic forms of PCs, which are main components of growing medicinal cannabis plants. As a proof-of-concept, SPME probes were statically inserted into the inflorescences of two varieties of Cannabis spp. plants (i.e., CBD-dominant and Δ9-THC-dominant) cultivated under controlled conditions for 30 min extraction of tetrahydrocannabinolic acid (Δ9-THCA), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), cannabiviarinic acid (CBVA), and tetrahydrocannabivarinic acid (THCVA). SIGNIFICANCE AND NOVELTY: The results confirmed that the developed SPME-LC-Q-TOF-MS method is a precise and efficient tool that enables direct and rapid isolation and analysis of PCs under in vivo conditions. The proposed methodology is highly appealing option for monitoring the metabolic pathways and compositions of multiple PCs in medicinal cannabis at different stages of plant growth.

Model-based design of gradient elution in liquid-liquid chromatography: Application to the separation of cannabinoids.

Liquid-liquid chromatography (LLC) is a separation technique that utilizes a biphasic solvent system as the mobile and stationary phases. The components are separated solely due to their different distributions between the two liquid phases. Gradient change in the mobile phase composition during the chromatographic process is a powerful method for improving the resolution of separation or shortening the process time. Gradient elution readily applies to LLC with biphasic solvent systems in which the stationary phase composition remains nearly constant when the mobile phase composition changes. This work proposes a model-based approach to optimize gradients in LLC and circumvent tedious trial-and-error experiments. The solutes' distribution constant depends on the mobile phase composition. Thus, the distribution constants were described as a function of the content of one of the solvents (= modifier) in the mobile phase. The dispersive and mass-transfer effects in the tubing and the column are modeled with a stage model. Only a few experiments are required to determine the model parameters. After the validation of the model and its parameters, the model can be used for LLC gradient optimization. The proposed approach was demonstrated for a gradient LLC separation of a mixture of four cannabinoids. Two different gradient shapes, one-step and linear gradient, were considered. For a pre-selected minimal purity requirement, the gradient was optimized for maximum process efficiency, defined as the product of productivity and yield. An experiment conducted with the optimized gradient conditions was in good agreement with the simulation, showing the potential of the proposed method.

Appearance of hexahydrocannabinols as recreational drugs and implications for cannabis drug testing - focus on HHC, HHC-P, HHC-O and HHC-H.

This study investigated the effects of hexahydrocannabinol (HHC) and other unclassified cannabinoids, which were recently introduced to the recreational drug market, on cannabis drug testing in urine and oral fluid samples. After the appearance of HHC in Sweden in 2022, the number of posts about HHC on an online drug discussion forum increased significantly in the spring of 2023, indicating increased interest and use. In parallel, the frequency of false positive screening tests for tetrahydrocannabinol (THC) in oral fluid, and for its carboxy metabolite (THC-COOH) in urine, rose from <2% to >10%. This suggested that HHC cross-reacted with the antibodies in the immunoassay screening, which was confirmed in spiking experiments with HHC, HHC-COOH, HHC acetate (HHC-O), hexahydrocannabihexol (HHC-H), hexahydrocannabiphorol (HHC-P), and THC-P. When HHC and HHC-P were classified as narcotics in Sweden on 11 July 2023, they disappeared from the online and street shops market and were replaced by other unregulated variants (e.g. HHC-O and THC-P). In urine samples submitted for routine cannabis drug testing, HHC-COOH concentrations up to 205 (mean 60, median 27) µg/L were observed. To conclude, cannabis drug testing cannot rely on results from immunoassay screening, as it cannot distinguish between different tetra- and hexahydrocannabinols, some being classified but others unregulated. The current trend for increased use of unregulated cannabinols will likely increase the proportion of positive cannabis screening results that need to be confirmed with mass spectrometric methods. However, the observed cross-reactivity also means a way to pick up use of new cannabinoids that otherwise risk going undetected.

Uncovering the metabolite complexity and variability of cultivated hemp (Cannabis sativa L.): A first phytochemical diversity mapping in Greece.

The high value of fiber-type Cannabis sativa L. (hemp) due to its phytochemicals has yet to be fully recognized and leveraged. Besides cannabidiol (CBD), which is the most prevalent non-psychoactive cannabinoid, hemp contains numerous other cannabinoids with unexplored bioactivities, in addition to various compound classes. Previous works have aimed to correlate chemical profiles of C. sativa inflorescences with important parameters, mostly based on experiments under controlled conditions. However, mapping studies that explore the phytochemical diversity of hemp in a more realistic context are crucial to guide decisions at multiple levels, especially in areas where hemp cultivation was recently re-authorized, including Mediterranean countries. In this work, a powerful strategy was followed to map the phytochemical diversity of cultivated hemp in Greece, being the first study of its kind for this environment. A panel of 98 inflorescence samples, covering two harvesting years, eleven geographical regions and seven commonly used EU varieties, were studied using a combination of targeted and untargeted approaches. Quantitative results based on UPLC-PDA revealed relatively constant CBD/THC (total) ratios, while profiling by LC-HRMS effectively probed the phytochemical variability of samples, and led to the annotation of 88 metabolites, including a multitude of minor cannabinoids. Multivariate analysis substantiated a strong effect of harvesting year in sample discrimination and related biomarkers were revealed, belonging to fatty acids and flavonoids. The effect of geographical region and, especially, variety on chemical variation patterns was more intricate to interpret. The results of this work are envisioned to enhance our understanding of the real-world phytochemical complexity of C. sativa (hemp), with a view to maximized utilization of hemp for the promotion of human well-being.

Quantification of sixteen cannabinoids in hemp seed edible oils and the influence of thermal processing on cannabinoid contents and profiles.

To investigate cannabinoid content and profiles, 16 cannabinoids were quantified in 30 commercial hemp seed edible oils. In addition, one hemp seed oil was subjected to thermal processing up to 200 °C for up to 60 min. UHPLC-MS/MS was used for analysis. The content of cannabinoids in the samples ranged from 9 to 279 mg kg-1 (sum) and for Δ9-tetrahydrocannabinol (Δ9-THC) from 0.2 to 6.7 mg kg-1. Three samples exceeded the EU Δ9-THC equivalent maximum levels of 7.5 mg kg-1 for hemp seed oils. Cannabinoid profiles can provide indications of different product characteristics (e.g. degree of processing, variety of plant material). Furthermore, intense thermal processing (200 °C, 60 min) led to 38% decrease in sum cannabinoid content (sum of all analysed cannabinoids in this study), 99% decrease in cannabinoid acids, and 22% increase in Δ9-THC.

An evaluation of the cannabinoid content of the liquid and thermal degradation analysis of cannabis-labeled vape liquids.

Cannabidiol (CBD) vape pen usage has been on the rise given the changing political and scientific climate as well as the promotion of these delivery systems as a more accessible and lower-risk option for consumers. Despite being marketed as a safer way to use cannabis, CBD vape liquids are sold without restrictions or meticulous quality control procedures such as toxicological and clinical assessment, standards for product preservation, or investigative degradation analyses. Nine CBD-labeled vape liquid samples purchased and manufactured in the United States were evaluated and assessed for cannabinoid content. Quantification and validation of cannabinoids and matrix components was accomplished using gas and liquid chromatography with mass spectrometry analysis (GC-MS and LC-MS/MS) following liquid-liquid extraction with methanol. Samples degraded by temperature (analyzed by GC-MS) showed a greater disparity from the labeled CBD content compared with samples analyzed as purchased (by LC-MS/MS). Thermal degradation of the vape liquids showed increased levels of tetrahydrocannabinol (THC). Also, extended time and temperature degradation were evaluated in vape liquids by storing them for 15 months and then varying temperature conditions before analysis, which indicated CBD transformed into other cannabinoids leading to different cannabinoid content within the vape samples. Evaluation conducted on these vape liquids indicated the route of exposure, storage conditions, and length of storage could expose consumers to unintended cannabinoids and showed a concerning level of disagreement between the products' labeled cannabinoid content and the results generated by these analyses.

Simultaneous analysis of cannabinoids and terpenes in Cannabis sativa inflorescence using full comprehensive two-dimensional liquid chromatography coupled to smart active modulation.

Nowadays, the higher peak capacity achievable by comprehensive two-dimensional liquid chromatography (LC×LC) for the analysis of vegetal samples is well-recognized. In addition, numerous compounds may be present in very different amounts. Cannabinoids and terpenes represent the main components of Cannabis sativa inflorescence samples, whose quantities are relevant for many application purposes. The analyses of both families are performed by different methods, at least two different separation methodologies, mainly according to their chemical characteristics and concentration levels. In this work, concentration differences and sample complexity issues were addressed using an LC×LC method that incorporates an optimized modulation strategy, namely smart active modulation, for the simultaneous analysis of cannabinoids and terpenes. The system was built by interposing an active flow splitter pump between both dimensions. This set up aimed to exploit the known advantages of LC×LC. In addition, here we proposed to use the splitter pump for online control over the splitting ratio to facilitate the selective dilution of different eluted fractions containing compounds with highly different concentrations. This work represents the first application and demonstration of smart active modulation (SAM) in LC×LC to simultaneously determine analytes with significant differences in concentration levels present in complex samples. The proposed method was tested with eight different strains, from which fingerprints were taken, and numerous cannabinoids and terpenes were identified in these samples. With this strategy, between 49 and 54 peaks were obtained in the LC×LC chromatograms corresponding to different strains. THCA-A was the main component in six strains, while CBDA was the main component in the other two strains. The main terpenes found were myrcene (in five strains), limonene (in two strains), and humulene (in one strain). Additionally, numerous other cannabinoids and terpenes were identified in these samples, providing valuable compositional information for growers, as well as medical and recreational users. The SAM strategy here proposed is simple and it can be extended to other complex matrices.

Maternal Cannabis Use during Lactation and Potential Effects on Human Milk Composition and Production: A Narrative Review.

Cannabis use has increased sharply in the last 20 y among adults, including reproductive-aged women. Its recent widespread legalization is associated with a decrease in risk perception of cannabis use during breastfeeding. However, the effect of cannabis use (if any) on milk production and milk composition is not known. This narrative review summarizes current knowledge related to maternal cannabis use during breastfeeding and provides an overview of possible pathways whereby cannabis might affect milk composition and production. Several studies have demonstrated that cannabinoids and their metabolites are detectable in human milk produced by mothers who use cannabis. Due to their physicochemical properties, cannabinoids are stored in adipose tissue, can easily reach the mammary gland, and can be secreted in milk. Moreover, cannabinoid receptors are present in adipocytes and mammary epithelial cells. The activation of these receptors directly modulates fatty acid metabolism, potentially causing changes in milk fatty acid profiles. Additionally, the endocannabinoid system is intimately connected to the endocrine system. As such, it is probable that interactions of exogenous cannabinoids with the endocannabinoid system might modify release of critical hormones (e.g., prolactin and dopamine) that regulate milk production and secretion. Nonetheless, few studies have investigated effects of cannabis use (including on milk production and composition) in lactating women. Additional research utilizing robust methodologies are needed to elucidate whether and how cannabis use affects human milk production and composition.

Metabolism of ADB-FUBIATA in zebrafish and pooled human liver microsomes investigated by liquid chromatography-high-resolution mass spectrometry.

RATIONALE: ADB-FUBIATA is one of the most recently identified new psychoactive substance (NPS) of synthetic cannabinoids. The co-use of in vitro (human liver microsomes) and in vivo (zebrafish) models offers abundant metabolites and may give a deep insight into the metabolism of NPS. METHODS: In vivo and in vitro metabolic studies of new synthetic cannabinoid ADB-FUBIATA were carried out using zebrafish and pooled human liver microsome models. Metabilites were structurally characterized by liquid chromatography-high-resolution mass spectrometry. RESULTS: In total, 18 metabolites were discovered and identified in the pooled human liver microsomes and zebrafish, including seventeen phase I metabolites and one phase II metabolite. The main metabolic pathways of ADB-FUBIATA were hydroxylation, dehydrogenation, N-dealkylation, amide hydrolysis, glucuronidation, and combination thereof. CONCLUSION: Hydroxylated metabolites can be recommended as metabolic markers for ADB-FUBIATA because of the structural characteristics and high intensity. These metabolism characteristics of ADB-FUBIATA were useful for its further forensic or clinical related investigations.

NPS-EQA PART I: Four years' experience in external quality assessment program in Italy for classical and new psychoactive substances analysis in oral fluid.

In 2019, Italian National Institute of Health established an external quality assessment program (EQA) to evaluate the performance of oral fluid testing for classical and new psychoactive substances by laboratories participating in the National Early Warning System collaborative centres. This report presents the results of four rounds between 2019 and 2023. Eleven oral fluid specimens, including 3 blank samples, were prepared by adding different classes of and new psychoactive drugs at known concentrations to pre-screened drug-free oral fluid. False-negative and false-positive results were calculated for the qualitative data evaluation. The quantitative evaluation measured the imprecision and accuracy of the results, in terms of coefficient of variation (CV%) and percent error (ERR%), respectively, with respect to a mean value obtained by reference laboratories. Z-score values were then calculated. Over the years, there has been a significant improvement in false-negative results (from 42.7% in the first year to 19.4% in the last year), but not in false-positive results (from 33.3% in the first year to 22.2% in the last one). In addition to the classic drugs of abuse (e.g. cocaine, amphetamine, methadone), the substances found in false positive samples belonged to the class of synthetic cannabinoids (e.g 5-fluoro CUMYL-PINACA and 5-fluoro-EDMB-PICA), synthetic opioids (e.g butyrylfentanyl) and tryptamines (e.g. 5-methoxy-N-methyl-N-isopropyltryptamine). The four rounds yielded a mean ERR% of approximately 22.1% and a mean CV% of around 41.5%. The participating laboratories demonstrated variable performances in relation to the class of analysed psychoactive substances, as evidenced by the calculated Z-scores. Between 25% and 60% of the reported results in all rounds should be considered satisfactory. EQA is a crucial element of laboratory quality management systems. It promotes continuous improvement and maintains high standards in the field of forensic and clinical drug testing.

Validation and application of a method for the quantification of 137 drugs of abuse and new psychoactive substances in hair.

INTRODUCTION: In the dynamic universe of new psychoactive substances (NPS), the identification of multiple and chemically diverse compounds remains a challenge for forensic laboratories. Since hair analysis represents a gold-standard to assess the prevalence of NPS, which are commonly detected together with classical drugs of abuse (DoA), our study aimed at developing a wide-screen method to detect and quantify 127 NPS and 15 DoA on hair. MATERIALS AND METHODS: A multi-analyte ultra-high performance liquid chromatography mass spectrometry method for the identification and quantification of 127 NPS (phenethylamines, arylcyclohexylamines, synthetic opioids, tryptamines, synthetic cannabinoids, synthetic cathinones, designer benzodiazepines) and 15 DoA in hair samples was developed. A full validation was performed according to the European medicines Agency (EMA) guidelines, by assessing selectivity, linearity, accuracy, precision, limit of quantification (LOQ), limit of detection (LOD), matrix effect and recovery. As a proof of the applicability, the method was applied to 22 authentic hair samples collected for forensic purposes. RESULTS: Successful validation was achieved, by meeting the required technical parameters, for 137 compounds (122 NPS and 15 DoA), with LOQ set at 4 pg/mg for 129 compounds, at 10 pg/mg for 6 and at 40 pg/mg for 2. The method was not considered validated for 5 NPS, as LLOQ resulted too high for a forensic analysis (80 pg/mg). Among authentic forensic samples, 17 tested positive for DoA, and 10 to NPS, most samples showing positivity for both. Detected NPS were ketamine and norketamine, 5-MMPA, ritalinic acid, methoxyacetyl fentanyl, methylone and RCS-4. CONCLUSION: The present methodology represents an easy, low cost, wide-panel method for the quantification of 122 NPS and 15 DoA, for a total of 137 analytes, in hair samples. The method can be profitably applied by forensic laboratories. Similar multi-analyte methods on the hair matrix might be useful in the future to study the prevalence of NPS and the co-occurrence of NPS-DoA abuse.

Differences in prescribed medicinal cannabis use by cannabinoid product composition: Findings from the cannabis as medicine survey 2020 (CAMS-20) Australia-wide study.

INTRODUCTION: Prescribed medicinal cannabis (MC) is an increasingly common prescription in Australia for treating pain, anxiety, and sleep disorders. Prescribed MC products generally contain tetrahydrocannabinol (THC) and/or cannabidiol (CBD) in a variety of dose levels and forms. It is unclear whether THC and CBD products are used by patients with different characteristics and for different conditions. OBJECTIVES: To examine consumer experiences of using THC- and CBD-containing prescribed MC products to better understand how they are being used within the Australian context. METHODS: We utilised data collected from an online anonymous cross-sectional survey of individuals (CAMS-20 survey), consisting of Australian residents using cannabis for therapeutic reasons. We focused on a subgroup of participants (N = 546) receiving prescribed MC products. We utilised linear, logistic, and multinomial regression modelling to analyse responses to survey questions based on the cannabinoid profile of the prescribed product. RESULTS: Participants prescribed THC-dominant MC products were statistically more likely to be younger, male, and to prefer inhaled routes of administration than participants using CBD-dominant products who were older, female, and preferred oral routes of administration. Pain and mental health were the most common reasons for all types of prescribed MC, but were more likely to be treated with THC than CBD despite the significantly higher risk of mild to severe drowsiness, dry mouth and eye irritation. Consumer reported effectiveness of prescribed MC was very positive, particularly for THC-containing products. Consumers on opioids and antipsychotics were statistically more likely to be prescribed THC-containing products than products containing CBD only, despite the greater risk of impairment. CONCLUSIONS: This Australia-wide study found clear differences in consumer-reported experiences of prescribed THC- and CBD-containing products. Current prescriptions of these products do not always align with relevant clinical guidance. Educating prescribers around cannabinoid products is essential to ensure optimal prescribing practices and to prevent avoidable drug side effects and interactions.

Identification and quantification of both isomers of hexahydrocannabinol, (9R)-hexahydrocannabinol and (9S)-hexahydrocannabinol, in three different matrices by mass spectrometry.

CONTEXT: Hexahydrocannabinol (HHC), a compound derived from synthetic production using cannabidiol (CBD) or delta-9-tetrahydrocannabinol (Δ9 -THC), has gained recent attention due to its presence in seized materials across Europe. Sold legally in various forms, HHC poses potential health risks, particularly as a legal alternative to THC in some countries. Despite its historical description in the 1940s, limited toxicology data, pharmacological understanding, and analytical methods for HHC exist. METHOD: This study proposes analytical techniques using mass spectrometry to detect, identify, and quantify (9R)-HHC and (9S)-HHC, concurrently with THC and CBD in various matrices, including oral fluid, whole blood, and seized material. Three distinct methods were employed for different matrices: GC/MS for seized material, GC/MS/MS for whole blood, and UHPLC/MS/MS for oral fluid. Methods were validated qualitatively for oral fluid with a FLOQSwab® device and quantitatively in whole blood and seized material according to Peters et al's recommendations and ICH guidelines. RESULTS: Validated methods were considered reliable in detecting and quantifying HHC isomers in terms of repeatability, reproducibility, and linearity with r2 systematically >0.992. These methods were applied to authentic cases, including seized materials and biological samples from traffic control (whole blood and oral fluid). In seized materials, (9R)-HHC levels ranged from 2.09% to 8.85% and (9R)-HHC/(9S)-HHC ratios varied from 1.36 to 2.68. In whole blood sample, (9R)-HHC and (9S)-HHC concentrations were, respectively, 2.38 and 1.39 ng/mL. For all analyzed samples, cannabinoids such as THC and CBD were also detected. CONCLUSION: This research contributes analytical insights into differentiating and simultaneously analyzing (9R)-HHC and (9S)-HHC, using widely applicable mass spectrometric methods. The study emphasizes the need for vigilance among toxicologists, as new semisynthetic cannabinoids continue to emerge in Europe, with potential health implications. The findings underscore the importance of reliable analytical methods for monitoring these compounds in forensic and clinical settings.

Cardiac effects of 5F-Cumyl-PEGACLONE.

Synthetic cannabinoids become increasingly popular as a supposedly safe and legal alternative to cannabis. In order to circumvent the German New Psychoactive Substances Law, producers of so-called herbal mixtures rapidly design new substances with structural alterations that are not covered by the law. Acting as full agonists not only at the cannabinoid receptors 1 and 2, synthetic cannabinoids might have not only desired mental but also serious physical adverse effects. However, knowledge of adverse effects of specific substances is sparse and incomplete. This also accounts for 5F-Cumyl-PEGACLONE, a synthetic cannabinoid, which has been detected regularly in Germany in recent years. By using an animal model, the isolated perfused Langendorff heart, the study at hand aimed on finding out more about possible cardiovascular adverse effects of 5F-Cumyl-PEGACLONE. Hearts of male Wistar rats, which were excised postmortem, were exposed to two different concentrations of 5F-Cumyl-PEGACLONE: 13 hearts were exposed to 50 ng/ml and 12 hearts were exposed to 100 ng/ml. Thirteen control hearts were merely exposed to an additional amount of buffer solution. Functional parameters heart rate, minimal and maximum left ventricular pressure and coronary flow were documented at pre-defined time points during and after the administration of 5F-Cumyl-PEGACLONE/additional buffer solution. Electrocardiograms (ECGs) were documented throughout the experiments and evaluated afterwards. Kruskal-Wallis analysis was performed for each functional parameter as well as for the duration of the QRS complexes and the duration of RR intervals as derived from the ECGs. Furthermore, a multivariate analysis, comprising all functional and ECG parameters, was performed. Kruskal-Wallis analysis revealed only single significant p-values for QRS duration and minimum left ventricular pressure that did not pass a Bonferroni test. The results of the multivariate approach were also comparably homogeneous, but still the model correctly recognized hearts exposed to 100 ng/ml of 5F-Cumyl-PEGACLONE more often than hearts exposed to the low concentration of 5F-Cumyl-PEGACLONE or additional buffer solution. Evaluation of the ECGs presented single cases of ST depression and QT prolongation. Though certainly not unambiguous, these findings support the assumption that 5F-Cumyl-PEGACLONE can cause severe, if not lethal, cardiac adverse effects like arrhythmias or myocardial infarctions especially if it is consumed in combination with other drugs like alcohol or if the consumer suffers from pre-existing heart diseases.

Evidence of the Ability of Microsatellite Method to Distinguish Cannabis Strains with High Cannabinoid Content.

Introduction: Cannabis is a plant with high potential for use in several sectors of the industry; however, it is also a controversial crop due to its tetrahydrocannabinol (THC) content. Moreover, the plant has a rather unclarified classification. Traditionally, two types of Cannabis have been distinguished, hemp as a source of fiber and low THC content, and marijuana with high THC levels, which is used as a drug. With the increasing use of CBD strains and wide range of commercially used THC strains, it is becoming paramount to be able to develop an easy and reliable method for Cannabis strain differentiation. The use of simple sequence repeat markers, or microsatellites, seems to be an applicable choice. Materials and Methods: In this study, 52 strains of Cannabis with variable cannabinoid content were collected from growers from different geographical regions and analyzed using 17 different microsatellite markers. For more precise differentiation, five strains were selected and a higher number of individuals of each were analyzed. Results: Fragment analysis and cluster analysis showed that when one to three individual plants per strain were analyzed, the method was able to classify these samples into distinguishable groups with similar gene structure. They also revealed that when a larger sample set was used (10 individual plants per strain), highly specific strain clusters could be fully discriminated. Conclusion: Our study involved the highest number of cannabinoid-rich strains up to now and showed that the microsatellite method can be used to reliably differentiate Cannabis strains and show their relationships.

Death after smoking of fentanyl, 5F-ADB, 5F-MDMB-P7AICA and other synthetic cannabinoids with a bucket bong.

PURPOSE: We report a case of a polydrug user who consumed various synthetic cannabinoids and fentanyl from a transdermal patch via a bucket bong. Toxicological results from postmortem matrices with special focus on synthetic cannabinoids are discussed in terms of their relevance to the death. METHODS: The samples were analyzed by toxicological screening procedures involving immunoassays and gas chromatography-mass spectrometry (GC-MS) as well as quantitative analyses by means of GC-MS and high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS). RESULTS: At the autopsy, coronary artery disease and signs of liver congestion were noted, in the absence of acute myocardial ischemic changes. Femoral blood concentrations of fentanyl and pregabalin were 14 ng/mL and 3,200 ng/mL, respectively. In addition, 2.7 ng/mL 5F-ADB and 13 ng/mL 5F-MDMB-P7AICA were detected together with relatively low amounts of 5 other synthetic cannabinoids in cardiac blood. A total number of up to 17 synthetic cannabinoids were detected in kidney, liver, urine and hair. Fentanyl and 5F-ADB were also detected in the water of the bucket bong. CONCLUSIONS: The cause of death could be attributed to an acute mixed intoxication by fentanyl and 5F-ADB (both Toxicological Significance Score (TSS) = 3) with a contribution of pregabalin and 5F-MDMB-P7AICA (TSS = 2), in a subject suffering from pre-existing heart damage. The most plausible mechanism of death consists in a respiratory depression. This case report demonstrates that use of opioids in combination with synthetic cannabinoids might be particularly dangerous.

Hexahydrocannabinol and closely related semi-synthetic cannabinoids: A comprehensive review.

Since the early 2000s, there has been a turmoil on the global illicit cannabinoid market. Parallel to legislative changes in some jurisdictions regarding herbal cannabis, unregulated and cheap synthetic cannabinoids with astonishing structural diversity have emerged. Recently, semi-synthetic cannabinoids manufactured from hemp extracts by simple chemical transformations have also appeared as recreational drugs. The burst of these semi-synthetic cannabinoids into the market was sparked by legislative changes in the United States, where cultivation of industrial hemp restarted. By now, hemp-derived cannabidiol (CBD), initially a blockbuster product on its own, became a "precursor" to semi-synthetic cannabinoids such as hexahydrocannabinol (HHC), which appeared on the drug market in 2021. The synthesis and cannabimimetic activity of HHC were first reported eight decades ago in quest for the psychoactive principles of marijuana and hashish. Current large-scale manufacture of HHC is based on hemp-derived CBD extract, which is converted first by cyclization into a Δ8 /Δ9 -THC mixture, followed by catalytic hydrogenation to afford a mixture of (9R)-HHC and (9S)-HHC epimers. Preclinical studies indicate that (9R)-HHC has THC-like pharmacological properties. The animal metabolism of HHC is partially clarified. The human pharmacology including metabolism of HHC is yet to be investigated, and (immuno)analytical methods for the rapid detection of HHC or its metabolites in urine are lacking. Herein, the legal background for the revitalization of hemp cultivation, and available information on the chemistry, analysis, and pharmacology of HHC and related analogs, including HHC acetate (HHC-O) is reviewed.

Potency trends of cannabis in Jamaica during the period of 2014 to 2020.

Reports suggest that cannabis potency has dramatically increased over the last decade in the USA and Europe. Cannabinoids are the terpeno-phenolic compounds found in the cannabis plant and are responsible for its pharmacological activity. The two most prominent cannabinoids are delta-9-tetrahydrocannabinol (Δ9 THC) and cannabidiol (CBD). Cannabis potency is measured not only by the Δ9 THC levels but also by the ratio of Δ9 THC to other non-psychoactive cannabinoids, namely, CBD. Cannabis use was decriminalized in Jamaica in 2015, which opened the gates for the creation of a regulated medical cannabis industry in the country. To date, there is no information available on the potency of cannabis in Jamaica. In this study, the cannabinoid content of Jamaican-grown cannabis was examined over the period 2014-2020. Two hundred ninety-nine herbal cannabis samples were received from 12 parishes across the island, and the levels of the major cannabinoids were determined using gas chromatography-mass spectrometry. There was a significant increase (p < 0.05) in the median total THC levels of cannabis samples tested between 2014 (1.1%) and 2020 (10.2%). The highest median THC was detected in the central parish of Manchester (21.1%). During the period, THC/CBD ratios increased from 2.1 (2014) to 194.1 (2020), and there was a corresponding increase in the percent freshness of samples (CBN/THC ratios <0.013). The data show that a significant increase in the potency of locally grown cannabis has occurred in Jamaica during the last decade.

Extraction solvent selection for Cannabis sativa L. by efficient exploration of cannabinoid selectivity and phytochemical diversity.

INTRODUCTION: Cannabis sativa L. is attracting worldwide attention due to various health-promoting effects. Extraction solvent type is critical for the recovery of bioactive compounds from the plant, especially cannabinoids. However, the choice of solvent is varied and not adequately warranted elsewhere, causing confusion in involved fields. OBJECTIVE: The present work aimed to investigate the effect of extraction solvent on C. sativa (hemp) with regard to cannabinoid recovery and phytochemical profile of the extracts, considering most of the related solvents. METHODOLOGY: The majority of solvents reported for C. sativa (n = 14) were compared using a representative hemp pool. Quantitative results for major and minor cannabinoids were rapidly and reliably obtained using ultrahigh-performance liquid chromatography coupled with photodiode array detection (UPLC-PDA). In parallel, high-performance thin-layer chromatographic (HPTLC) fingerprinting was employed, involving less toxic mobile phase than in relevant reports. Various derivatisation schemes were applied for more comprehensive comparison of extracts. RESULTS: Differential selectivity towards cannabinoids was observed among solvents. MeOH was found particularly efficient for most cannabinoids, in addition to solvent systems such as n-Hex/EtOH 70:30 and ACN/EtOH 80:20, while EtOH was generally inferior. For tetrahydrocannabinol (THC)-type compounds, EtOAc and n-Hex/EtOAc 60:40 outperformed n-Hex, despite its use in the official EU method. Solvents that tend to extract more lipids or more polar compounds were revealed based on HPTLC results. CONCLUSION: Combining the observations from UPLC quantitation and HPTLC fingerprinting, this work allowed comprehensive evaluation of extraction solvents, in view of robust quality assessment and maximised utilisation of C. sativa.

Determination of Cannabinoids in Cannabis sativa Oil and Infused Ice Cream by LC-DAD Method.

BACKGROUND: Cannabis sativa is known to produce a class of terpenophenolic compounds named cannabinoids. The two main ones are cannabidiol (CBD) and tetrahydrocannabinol (THC), which have therapeutic properties. In the development of cannabis-based preparations, it is important to have suitable analytical methods for the analysis of the principal cannabinoids. OBJECTIVE: This study aimed to develop and validate a simple and rapid HPLC method with photodiode array detection for determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, including a stability study. METHOD: Chromatographic separation of CBD and THC was performed with a C18 column, with a mobile phase consisting of acetonitrile and water with formic acid (80 + 20 v/v) in isocratic elution mode, with detection at 208 nm for CBD and 280 nm for THC and 1.0 mL/min flow rate. RESULTS: The method was linear over a range of 1-5 µg/mL for CBD, and 20-100 µg/mL for THC; the relative standard deviation was <3.6%, the recovery ranged between 98.8 and 102.5% for oil and between 84 and 94% for ice cream, QL was 0.33 µg/mL for CBD and 2.30 µg/mL for THC, and the assay demonstrated adequate selectivity. CBD and THC were stable for at least 28 days under light protection at 22°C, 4°C, and -20°C in the oil and for at least 60 days at -20°C in the ice cream. CONCLUSIONS: The results showed that the method was suitable for quantitative determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, and it is useful for quality control purposes. HIGHLIGHTS: The method is simple and fast, and it is useful for the quality control of a new product corresponding to an ice cream based on a Cannabis sativa oil extract.