Photochemical C-F Activation Enables Defluorinative Alkylation of Trifluoroacetates and -Acetamides.

The installation of gem-difluoromethylene groups into organic structures remains a daunting synthetic challenge despite their attractive structural, physical, and biochemical properties. A very efficient retrosynthetic approach would be the functionalization of a single C-F bond from a trifluoromethyl group. Recent advances in this line of attack have enabled the C-F activation of trifluoromethylarenes, but limit the accessible motifs to only benzylic gem-difluorinated scaffolds. In contrast, the C-F activation of trifluoroacetates would enable their use as a bifunctional gem-difluoromethylene synthon. Herein, we report a photochemically mediated method for the defluorinative alkylation of a commodity feedstock: ethyl trifluoroacetate. A novel mechanistic approach was identified using our previously developed diaryl ketone HAT catalyst to enable the hydroalkylation of a diverse suite of alkenes. Furthermore, electrochemical studies revealed that more challenging radical precursors, namely trifluoroacetamides, could also be functionalized via synergistic Lewis acid/photochemical activation. Finally, this method enabled a concise synthetic approach to novel gem-difluoro analogs of FDA-approved pharmaceutical compounds.

Conducting Polyetheretherketone Nanocomposites with an Electrophoretically Deposited Bioactive Coating for Bone Tissue Regeneration and Multimodal Therapeutic Applications.

The use of polyetheretherketone (PEEK) has grown exponentially in the biomedical field in recent decades because of its outstanding biomechanical properties. However, its lack of bioactivity/osteointegration remains an unresolved issue toward its wide use in orthopedic applications. In this work, graphene nanosheets have been incorporated into PEEK to obtain multifunctional nanocomposites. Because of the formation of an electrical percolation network and the π-π* conjugation between graphene and PEEK, the resulting composites have achieved 12 orders of magnitude enhancement in their electrical conductivity and thereby enabled electrophoretic deposition of a bioactive/antibacterial coating consisting of stearyltrimethylammonium chloride-modified hydroxyapatite. The coated composite implant shows significant boosting of bone marrow mesenchymal stem cell proliferation in vitro. In addition, the strong photothermal conversion effect of the graphene nanofillers has enabled laser-induced heating of our nanocomposite implants, where the temperature of the implant can reach 45 °C in 150 s. The unique multifunctionality of the implant has also been demonstrated for photothermal applications such as enhancing bacterial eradication and tumor cell inhibition, as well as bone tissue regeneration in vivo. The results suggest the strong potential of our multifunctional implant in bone repair applications as well as multimodal therapy of challenging bone diseases such as osteosarcoma and osteomyelitis.

Photo-physical, theoretical and photo-cytotoxic evaluation of a new class of lanthanide(iii)-curcumin/diketone complexes for PDT application.

Herein we report the synthesis, characterization, photophysical and photocytotoxicity studies of a new class of curcumin-based lanthanide(iii) complexes of general molecular formula [La(1,10-phen)2(L)(NO3)2] (1-4), where L = 1-phenylbutane-1,3-dione (L1, 1), 1-(anthracen-9-yl)butane-1,3-dione (L2, 2), 1-(3a1,5a1-dihydropyren-1-yl)butane-1,3-dione (L3, 3) and curcumin (L4, 4). Complex 1 was characterized by single-crystal X-ray crystallography and it exhibited the N4O6 coordination of La(iii). The presence of the low-lying and long-lived triplet excited state enabled the luminescent complexes (2-4) to generate singlet oxygen (1O2) in high yield when the complex was activated with visible light (400-700 nm, 10 J cm-2), which could be responsible for the photo-ablation of cancer cells. Complexes (2-4) exhibited remarkable photocytotoxicity in HeLa and MCF-7 cells with photocytotoxicity index 4-50 in the presence of visible light (400-700 nm, 10 J cm-2), while they were non-toxic in the dark with an IC50 value of >100 µM. The significantly lower toxicity (IC50 > 100 µM in the dark; IC50 in visible light ∼60 µM) of the complexes in MCF-10A (normal cells) in the dark and in visible light suggested their potential for targeting anticancer activity. Further studies showed that complex 4 induced caspase-dependent apoptosis through mitochondrial damage, mitochondrial respiration inhibition and reactive oxygen species (ROS) elevation. The cytosolic localization of complex 4 in HeLa cells, having a curcumin moiety as a fluorophore, was proved from the confocal microscopic studies. The photocytotoxicity of the complexes (1-4) was directly correlated to the efficacy of the complexes to generate singlet oxygen, which resulted in the photocytotoxicity order of 4 > 3>2 ≫ 1. Photo-physical studies revealed that the chelation of curcumin by La(iii) facilitated intersystem crossing in curcumin by reducing the energy gap of the singlet to triplet excited state. Therefore, the presence of low-lying and long-lived triplet excited state was responsible for increasing the generation of singlet oxygen and, thereby, photo-cytotoxicity in HeLa and MCF-7 cells. The present study has given an overall (Chemistry to Biology) perspective on the effect of La(iii) on the photo-cytotoxicity of selected photo-active curcumin-based ß-diketonate ligands.

Enhanced osteogenic activity of phosphorylated polyetheretherketone via surface-initiated grafting polymerization of vinylphosphonic acid.

Polyetheretherketone (PEEK) is considered to be a prime candidate with the potential to replace biomedical metallic materials as an orthopedic and dental implant on account of its elastic modulus similar to that of human cortical bone. Unfortunately, its biomedical application is impeded by the bioinert surface property and inferior osteogenic activity. In this work, phosphate groups were incorporated onto the PEEK surface through a single-step UV-initiated graft polymerization of vinylphosphonic acid. Diffuse reflectance Fourier transform infrared spectroscopy (DRFTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) revealed that phosphate groups were successfully introduced onto the PEEK surface without apparently altering its surface topographical feature and roughness. Water contact angle measurements diclosed the increasing hydrophilia after surface phosphonation. In vitro cell adhesion, spreading, proliferation, alkaline phosphatase activity, extracellular matrix mineralization, and real-time PCR analyses showed enhanced adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 osteoblast on the surface-phosphorylated PEEK. An in vivo biological evaluation in the rabbit tibiae proximal defect model by means of a histological analysis confirmed that the surface-phosphorylated PEEK had improved bone-implant contact. The obtained results indicate that enhanced osteogenic activity to surface-phosphorylated PEEK, which gives positive information of its potential applications in orthopedic and dental implants.

Photoreduction of CO2 with a Formate Dehydrogenase Driven by Photosystem II Using a Semi-artificial Z-Scheme Architecture.

Solar-driven coupling of water oxidation with CO2 reduction sustains life on our planet and is of high priority in contemporary energy research. Here, we report a photoelectrochemical tandem device that performs photocatalytic reduction of CO2 to formate. We employ a semi-artificial design, which wires a W-dependent formate dehydrogenase (FDH) cathode to a photoanode containing the photosynthetic water oxidation enzyme, Photosystem II, via a synthetic dye with complementary light absorption. From a biological perspective, the system achieves a metabolically inaccessible pathway of light-driven CO2 fixation to formate. From a synthetic point of view, it represents a proof-of-principle system utilizing precious-metal-free catalysts for selective CO2-to-formate conversion using water as an electron donor. This hybrid platform demonstrates the translatability and versatility of coupling abiotic and biotic components to create challenging models for solar fuel and chemical synthesis.

Visible-Light-Activated Asymmetric ß-C-H Functionalization of Acceptor-Substituted Ketones with 1,2-Dicarbonyl Compounds.

We report a visible-light-activated asymmetric ß-C(sp3)-H functionalization of 2-acyl imidazoles and 2-acylpyridines with 1,2-dicarbonyl compounds (typically α-ketoesters) catalyzed by a tailored stereogenic-at-rhodium Lewis acid catalyst. The C-C bond formation products are obtained in high yields (up to 99%) and with excellent stereoselectivities (up to >20:1 dr and up to >99% ee). Experimental and computational studies support a mechanism in which a photoactivated Rh-enolate transfers a single electron to the 1,2-dicarbonyl compound followed by proton transfer and a subsequent stereocontrolled radical-radical recombination.

Degradation mechanisms of geosmin and 2-MIB during UV photolysis and UV/chlorine reactions.

We conducted chlorination, UV photolysis, and UV/chlorin reactions to investigate the intermediate formation and degradation mechanisms of geosmin and 2-methylisoborneol (2-MIB) in water. Chlorination hardly removed geosmin and 2-MIB, while the UV/chlorine reaction at 254 nm completely removed geosmin and 2-MIB within 40 min and 1 h, respectively, with lesser removals of both compounds during UV photolysis. The kinetics during both UV photolysis and UV/chlorine reactions followed a pseudo first-order reaction. Chloroform was found as a chlorinated intermediate during the UV/chlorine reaction of both geosmin and 2-MIB. The pH affected both the degradation and chloroform production during the UV/chlorine reaction. The open ring and dehydration intermediates identified during UV/chlorine reactions were 1,4-dimethyl-adamantane, and 1,3-dimethyl-adamantane from geosmin, 2-methylenebornane, and 2-methyl-2-bornene from 2-MIB, respectively. Additionally, 2-methyl-3-pentanol, 2,4-dimethyl-1-heptene, 4-methyl-2-heptanone, and 1,1-dichloro-2,4-dimethyl-1-heptane were newly identified intermediates from UV/chlorine reactions of both geosmin and 2-MIB. These intermediates were degraded as the reaction progressed. We proposed possible degradation pathways during the UV photolysis and UV/chlorine reactions of both compounds using the identified intermediates.

Enhancement of bioactivity on medical polymer surface using high power impulse magnetron sputtered titanium dioxide film.

This study utilizes a novel technique, high power impulse magnetron sputtering (HIPIMS), which provides a higher ionization rate and ion bombardment energy than direct current magnetron sputtering (DCMS), to deposit high osteoblast compatible titanium dioxide (TiO2) coatings with anatase (A-TiO2) and rutile (R-TiO2) phases onto the biomedical polyetheretherketone (PEEK) polymer substrates at low temperature. The adhesions of TiO2 coatings that were fabricated using HIPIMS and DCMS were compared. The in vitro biocompatibility of these coatings was confirmed. The results reveal that HIPIMS can be used to prepare crystallinic columnar A-TiO2 and R-TiO2 coatings on PEEK substrate if the ratio of oxygen to argon is properly controlled. According to a tape adhesion test, the HIPIMS-TiO2 coatings had an adhesion grade of 5B even after they were immersed in simulated body fluid (SBF) environments for 28days. Scratch tests proved that HIPIMS-TiO2 coatings undergo cohesive failure. These results demonstrate that the adhesive force between HIPIMS-TiO2 coating/PEEK is stronger than that between DCMS-TiO2 coating/PEEK. After a long period (28days) of immersion in SBF, a bone-like crystallinic hydroxyapatite layer with a corresponding Ca/P stoichiometry was formed on both HIPIMS-TiO2. The osteoblast compatibility of HIPIMS-TiO2 exceeded that of the bare PEEK substrate. It is also noticeable that the R-TiO2 performed better in vitro than the A-TiO2 due to the formation of many negatively charged hydroxyl groups (-OH(-)) groups on R-TiO2 (110) surface. In summary, the HIPIMS-TiO2 coatings satisfied the requirements for osseointegration, suggesting the possibility of using HIPIMS to modify the PEEK surface with TiO2 for spinal implants.

A simple strategy for in situ fabrication of a smart hydrogel microvalve within microchannels for thermostatic control.

Self-regulation of temperature in microchip systems is crucial for their applications in biomedical fields such as cell culture and biomolecule synthesis as well as those cases that require constant temperature conditions. Here we report on a simple and versatile approach for in situ fabrication of a smart hydrogel microvalve within a microchip for thermostatic control. The thermo-responsive hydrogel microvalve enables the "on-off" switch by sensing temperature fluctuations to control the fluid flux as well as the fluid heat exchange for self-regulation of the temperature at a constant range. Such temperature self-regulation is demonstrated by integrating the microvalve-incorporated microchip into the flow circulation loop of a micro-heat-exchanging system for thermostatic control. Moreover, the microvalve-incorporated microchip is employed for culturing cells under temperature self-regulation. The smart microvalve shows great potential as a temperature controller for applications that require thermostatic conditions. This approach offers a facile and flexible strategy for in situ fabricating hydrogel microvalves within microchips as chemostats and microreactors for biomedical applications.

Safety of retained microcatheters: an evaluation of radiofrequency heating in endovascular microcatheters with nitinol, tungsten, and polyetheretherketone braiding at 1.5 T and 3 T.

BACKGROUND: The use of ethylene-vinyl alcohol copolymer for liquid embolization of cranial vascular lesions has resulted in microcatheter fragments entrapped in patients following endovascular procedures. Undergoing subsequent diagnostic MRI examinations poses a safety concern due to the possibility of radiofrequency heating of the metallic braid incorporated into the microcatheter. Heating of nitinol, tungsten, and polyetheretherketone (PEEK) braided microcatheters was assessed and compared using a phantom model. METHODS: Microcatheters coupled with fluoroptic temperature probes were embedded in a polyacrylamide gel within a head and torso phantom. Experiments were performed at 1.5 T and 3 T, analyzing the effects of different catheter immersion lengths, specific absorption rate (SAR) levels, short clinical scans, long clinical scans, and microcatheter fragment lengths. RESULTS: The maximal increase in temperature for the nitinol braided microcatheter during a 15 min scan was 3.06°C using the T1 fast spin echo sequence at 1.5 T and 0.45°C using the balanced steady state free precession sequence at 3 T. The same scans for fragment lengths of 9, 18, 36, and 72 cm produced maximal temperature rises of 0.68, 0.80, 1.70, and 1.07°C at 1.5 T, respectively. The temperature changes at 3 T for these fragment lengths were 0.66, 0.83, 1.07, and 0.72°C, respectively. The tungsten and PEEK braided microcatheters did not demonstrate heating. CONCLUSIONS: Substantial heating of nitinol braided microcatheters occurred and was a function of SAR level and geometric considerations. SAR and time limitations on MR scanning are proposed for patients with this microcatheter entrapped in their vasculature. In contrast, tungsten and PEEK braided microcatheters showed potential safe use in MRI.

Volatile organic compounds characterized from grapevine (Vitis vinifera L. cv. Malbec) berries increase at pre-harvest and in response to UV-B radiation.

Ultraviolet-B solar radiation (UV-B) is an environmental signal with biological effects in plant tissues. Recent investigations have assigned a protective role of volatile organic compounds (VOCs) in plant tissues submitted to biotic and abiotic stresses. This study investigated VOCs in berries at three developmental stages (veraison, pre-harvest and harvest) of Vitis vinifera L. cv. Malbec exposed (or not) to UV-B both, in in vitro and field experiments. By Head Space-Solid Phase Micro Extraction-Gas Chromatography-Electron Impact Mass Spectrometry (HS-SPME-GC-EIMS) analysis, 10 VOCs were identified at all developmental stages: four monoterpenes, three aldehydes, two alcohols and one ketone. Monoterpenes increased at pre-harvest and in response to UV-B in both, in vitro and field conditions. UV-B also augmented levels of some aldehydes, alcohols and ketones. These results along with others from the literature suggest that UV-B induce grape berries to produce VOCs (mainly monoterpenes) that protect the tissues from UV-B itself and other abiotic and biotic stresses, and could affect the wine flavor. Higher emission of monoterpenes was observed in the field experiments as compared in vitro, suggesting the UV-B/PAR ratio is not a signal in itself.

Indium-mediated regioselective synthesis of ketones from arylstannanes under solvent-free ultrasound irradiation.

The solvent-free indium-promoted reaction of alkanoyl chlorides with sterically and electronically diverse arylstannanes is a simple and direct method for the regioselective synthesis of primary, secondary and tertiary alkyl aryl ketones in good to excellent isolated yields (42-84%) under mild and neutral conditions. The protocol is also adequate for the synthesis of aryl vinyl ketones. Reaction times are drastically reduced (from 3-32h to 10-70min) under ultrasonic irradiation. Evidences for the involvement of a homolytic aromatic ipso-substitution mechanism, in which indium metal acts as radical initiator, are presented. It is possible the transference of two aryl groups from tin, thus improving effective mass yield, working with diarylstannanes as starting substrates.

The allylation reactions of aromatic aldehydes and ketones with tin dichloride in water.

The allylation reactions of aromatic aldehydes and ketones were carried out in 31-86% yield using SnCl(2)-H(2)O system under ultrasound irradiation at r.t. for 5h. The reactions in the same system gave homoallyl alcohols in 21-84% yield with stirring at r.t. for 24h. Compared with traditional stirring methods, ultrasonic irradiation is more convenient and efficient.

Microwave-assisted Wolff rearrangement of cyclic 2-diazo-1,3-diketones: an eco-compatible route to alpha-carbonylated cycloalkanones.

The microwave-assisted Wolff rearrangement of cyclic 2-diazo-1,3-diketones performed in the presence of a stoichiometric amount of alcohol, amine, or thiol is an efficient, user, and environmentally friendly synthetic protocol for the synthesis of alpha-carbonylated cycloalkanones. This approach proves superior to existing protocols in scope and eco-compatibility.

Photolysis of dibenzyl ketones sorbed on MFI zeolites in the presence of spectator molecules: cage effects, kinetics, and external surface sites characterization.

Over the past two decades, the photolytic reactions of dibenzyl ketones sorbed on zeolites have been investigated. The reported results are consistent with a supramolecular model that takes into account the physical and chemical nature of the structure of the zeolites and their effect on the reactive radical intermediates produced by photolysis of adsorbed molecules. The model incorporates various phenomena such as surface coverage, external and internal sorption, surface diffusion, radical sieving, and the resulting product distributions. This account reports direct evidence for the validation of the model through FT-IR spectroscopy and through a new method for "titrating" the binding sites via EPR spectroscopy. It is shown that it is possible to adjust and modulate the photolytic product distribution by varying the parameters of the system. The effects of co-adsorbed spectator molecules with different polarities, namely water, pyridine, and benzene, on the photolysis of o-methyldibenzyl ketone and dibenzyl ketone sorbed on MFI zeolites is examined. This study provides insights into a displacement mechanism caused by spectator molecules and further demonstrates how the product distribution of photolysis of sorbed ketones can be controlled. The kinetics of persistent radicals formed by photolysis of ketones sorbed on zeolites is directly monitored over time by EPR, providing a measure of the lifetime of these reactive organic intermediates. Finally, measurement of Langmuir isotherms was employed to provide classical evidence for the model.

On the effect of donor and acceptor substituents on the behaviour of light-driven rotary molecular motors.

Light-driven rotary molecular motors based on overcrowded alkenes can be substituted with electron-donating and electron-withdrawing substituents (R = OMe, Cl and CN) in direct conjugation with the central double bond (the axis of rotation) without having a significant influence on the rate-limiting, thermal isomerisation step of their rotary cycle. This indicates that in this system, it is predominantly steric factors that determine the barrier to the thermal helix inversion. In contrast, the quantum yield and photoequilibria in the photochemical step were found to be quite sensitive to the combination of substituent and solvent employed.

Templation of the excited-state chemistry of alpha-(n-alkyl) dibenzyl ketones: how guest packing within a nanoscale supramolecular capsule influences photochemistry.

Excited-state behavior of eight alpha-alkyl dibenzyl ketones (alkyl = CH3 through n-C8H17) that are capable of undergoing type II and/or type I photoreactions has been explored in isotropic solution and within a water-soluble capsule. The study consisted of two parts: photochemistry that explored the excited-state chemistry and an NMR analysis that revealed the packing of each guest within the capsule. The NMR data (COSY, NOESY, and TOCSY experiments) revealed that ternary complexes between alpha-alkyl dibenzyl ketones and the capsule formed by two cavitands are kinetically stable, and the guests fall into three packing motifs modulated by the length of the alpha-alkyl chain. In essence, the host is acting as an external template to promote the formation of distinct guest conformers. The major products from all eight guests upon irradiation either in hexane or in buffer solution resulted from the well-known Norrish type I reaction. However, within the capsule the excited-state chemistry of the eight ketones was dependent on the alkyl chain length. The first group consisted of alpha-hexyl, alpha-heptyl, and alpha-octyl dibenzyl ketones that yielded large amounts of Norrish type II products within the host, while in solution the major products were from Norrish type I reaction. The second group consists of alpha-butyl and alpha-pentyl dibenzyl ketones that yield equimolar amounts of two rearranged starting ketones within the capsule (combined yield of ca 60%), while in solution no such products were formed. The third group consisted of alpha-methyl, alpha-ethyl, and alpha-propyl dibenzyl ketones that within the capsule yielded only one (not two) rearranged starting ketone in larger amounts (21-35%) while in solution no rearrangement product was obtained. Variation in the photochemistry of the guest within the capsule, with respect to the alpha-alkyl chain length of the guest, highlights the importance of how a small variation in supramolecular structure can influence the selectivity within a confined nanoscale reactor.

Direct one-pot synthesis of phenanthrenes via Suzuki-Miyaura coupling/aldol condensation cascade reaction.

We have developed an efficient cascade reaction, a Suzuki-Miyaura coupling followed by an aldol condensation, for the construction of phenanthrene derivatives using microwave irradiation. For example, the reaction of methyl 2-bromophenylacetamide with 2-formylphenylboronic acid in the presence of a palladium catalyst and a base provided a biaryl intermediate, which underwent in situ cyclization to afford the corresponding phenanthrene in high yield.

Ultrasound promoted asymmetric transfer hydrogenation of ketones using Ru(II)arene/amino alcohol catalyst system.

Asymmetric transfer hydrogenation of ketones using Ru(II)arene/amino alcohol catalyst system proceeds with significant rate enhancement by ultrasound promotion. Comparison of the silent reactions carried out at 25 degrees C with reactions under sonochemical activation at 25 degrees C clearly showed enhancement in catalytic activity by 5-10 times without significantly affecting the enantioselectivity.

Stable photoinduced charge separation in heptacene.

Heptacene, generated in inert gas matrices by photobisdecarbonylation of a bridged alpha-diketone precursor, undergoes ionization into radical anion and radical cation upon UV irradiation.