Nickel(II) Chromite Nanoparticles: An Eco-Friendly and Reusable Catalyst for Synthesis of 2,4-Diamino-6-aryl-pyrimidine-5-yl Cyanides under Ultrasonic Radiation.

BACKGROUND: One of the principal factors in the field of research in green chemistry is to drive chemical reactions using ultrasonication as a versatile synthetic tool. Moreover, nanostructured metal salts occupy an important position as low cost, efficient, heterogeneous, and green catalysts in chemical reactions. Pyrimidine has also acquired significance because it is a core structure in a variety of natural and non-natural agents, many of which display versatile biological activities and medical applications. OBJECTIVE: The aim of this study was to explore the role of nickel(II) chromite nanoparticles (NiCr2O4 NPs) as a green and recyclable catalyst for the synthesis of 2,4-diamino-6-arylpyrimidine- 5-yl cyanides under ultrasonic radiation. METHODS: A direct cyclocondensation reaction of guanidine nitrate, aromatic aldehydes, and malononitrile was performed using NiCr2O4 NPs as an effective heterogeneous catalyst under ultrasonic radiation at room temperature conditions to prepare 2,4-diamino-6-aryl-pyrimidine-5-yl cyanides in high yields. The described catalyst was prepared successfully according to a simple hydrothermal route and fully characterized by the X-Ray diffraction (XRD) technique, dispersive energy X-Ray (EDS) analysis, scanning electron microscopy (SEM), and dynamic light scattering (DLS). RESULTS: A number of 2,4-diamino-6-aryl-pyrimidine-5-yl cyanides were effectively synthesized in high yields (94-98%) within short reaction times (15 min). All synthesized compounds were well characterized by IR, 1H and 13C NMR spectroscopy, and also by elemental analyses. CONCLUSION: In conclusion, a simple, efficient, and green synthesis of 2,4-diamino-6-arylpyrimidine- 5-yl cyanides was developed using NiCr2O4 NPs as a green nanocatalyst, and under ultrasound radiation as a green tool. The mild reaction conditions, avoiding the use of toxic solvents or reagents, high atom economy, high yields, and simple workup are the attractive features of this new protocol.

Isocyanide Multicomponent Reactions on Solid Phase: State of the Art and Future Application.

Drug discovery efforts largely depend on access to structural diversity. Multicomponent reactions allow for time-efficient chemical transformations and provide advanced intermediates with three or four points of diversification for further expansion to a structural variety of organic molecules. This review is aimed at solid-phase syntheses of small molecules involving isocyanide-based multicomponent reactions. The majority of all reported syntheses employ the Ugi four-component reaction. The review also covers the Passerini and Groebke-Blackburn-Bienaymé reactions. To date, the main advantages of the solid-phase approach are the ability to prepare chemical libraries intended for biological screening and elimination of the isocyanide odor. However, the potential of multicomponent reactions has not been fully exploited. The unexplored avenues of these reactions, including chiral frameworks, DNA-encoded libraries, eco-friendly synthesis, and chiral auxiliary reactions, are briefly outlined.

Aryl isocyanide derivative for one-pot synthesis of purification-free 99mTc-labeled hexavalent targeting probe.

INTRODUCTION: 99mTc-labeled hexavalent probes can be readily synthesized by the coordination of six equivalent isocyanide ligands towards TcI, and alkyl isocyanide ligands have been extensively used for preparing such probes. However, high ligand concentration (>1 mM) is generally required due to their insufficient coordination ability to TcI. METHODS AND RESULTS: In this study, we revealed that aryl isocyanide ligands, which have greater π-accepting ability compared with alkyl ones, provided 99mTc-labeled hexavalent probes in high radiochemical yields (>95%) even at low ligand concentration (50 µM). We applied this finding to the synthesis of a 99mTc-labeled hexavalent RGD probe, targeting integrin αvß3. This 99mTc-labeled probe was prepared in a 5 min reaction at ligand concentration of 50 µM, and exhibited high tumor localization in vivo without post-labeling purification. CONCLUSION: The present findings indicate that aryl isocyanide ligands would be a useful precursor to a variety of 99mTc-labeled hexavalent targeting probes for molecular imaging of saturable systems. ADVANCES IN KNOWLEDGE: Aryl isocyanide is a better precursor than alkyl isocyanide for preparing 99mTc-labeled hexavalent targeting probe. IMPLICATION FOR PATIENT CARE: This work provides a straightforward method to prepare molecular imaging agents of high target uptake, which would facilitate nuclear medicine imaging in clinical settings.

Green synthesis of a palladium nanocatalyst anchored on magnetic lignin-chitosan beads for synthesis of biaryls and aryl halide cyanation.

Aryl nitriles, Ar-C ≡ N, and biaryls are important precursors of many compounds commonly used in the industry. Production of aryl nitriles and biaryls through a facile method is therefore of significance. In the study the synthesis of aryl nitriles and biaryls with various substituted groups was successfully achieved using a simple but efficient palladium nanocatalyst system. The nano-catalyst system, (Pd NPs@Fe3O4/lignin/chitosan), was easily prepared by decorating palladium nanoparticles on the magnetic lignin/chitosan microbeads without using any toxic reducing agents. Characterization of the catalyst revealed that the size of palladium nanoparticles was lower than 20 nm and the palladium nanoparticles were homogeneously dispersed on the catalyst support; Fe3O4/lignin/chitosan. The catalytic activity of Pd NPs@Fe3O4/lignin/chitosan was tested in the synthesis of a number of various aryl nitriles and biaryls. Pd NPs@Fe3O4/lignin/chitosan catalyzed the conversion of different aryl halides into aryl nitriles in the presence of K4[Fe(CN)6] by producing conversion yields as high as 97%. The system also exhibited good reactions yields up to 98% for synthesis of biaryls. More importantly, due to its magnetic nature, the used catalyst was easily recovered from the reaction media with a magnet, and regenerated and reused for seven runs.

Synthesis of Natural (-)-Antrocin and its Enantiomer via Stereoselective Aldol Reaction.

The total synthesis of (-)-antrocin and its enantiomer are presented. Antrocin (-)-1 is an important natural product which acts as an antiproliferative agent in a metastatic breast cancer cell line (IC50: 0.6 µM). The key features of this synthesis are: (a) selective anti-addition of trimethylsilyl cyanide (TMSCN) to α,ß-unsaturated ketone; (b) resolution of (±)-7 using chiral auxiliary L-dimethyl tartrate through formation of cyclic ketal diastereomers followed by simple column chromatography separation and acid hydrolysis; (c) substrate-controlled stereoselective aldol condensation of (+)-12 with monomeric formaldehyde and pyridinium chlorochromate (PCC) oxidation for synthesis of essential lactone core in (-)-14; and (d) non-basic Lombardo olefination of the carbonyl at the final step to yield (-)-antrocin. In addition, (+)-9 cyclic ketal diastereomer was converted to (+)-antrocin with similar reaction sequences.

Cyanomethylation of Substituted Fluorenes and Oxindoles with Alkyl Nitriles.

The first example of metal-free cyanomethylenation from alkyl nitriles of sp3 C-H bonds to afford quaternary carbon centers is described. This oxidative protocol is operationally simple and features good functional group compatibility. This method provides a novel approach to highly functionalized fluorene and oxindole derivatives, which are commonly used in material and pharmaceutical areas. Control experiments provide evidence of a radical reaction process.

One-Step Synthesis of One-Dimensional Supramolecular Assemblies Composed of Helical Macromolecular Building Blocks.

Living systems achieve sophisticated functions using supramolecular protein assemblies, in which the protein building blocks possess a specific secondary structure and are noncovalently arranged in a preprogrammed manner. Herein, we demonstrate the one-step synthesis of one-dimensional macromolecular assemblies by simply mixing a glycine-based isocyanide with a nickel catalyst, in which helical constituent polymers are linked end-to-end through multiple hydrogen bonds. The applicable scope of this approach is not confined to a particular monomer bearing a specially designed pendant, but covers a wide range of glycine-based isocyanides with or without aromatic and other functional groups. Surprisingly, copolymerization with an analogous chiral isocyanide (1 mol %) afforded an almost perfect one-handed helical supramolecular fiber owing to intramolecular/intermolecular dual chiral amplifications. The simplicity and broad applicability of this approach, which can also afford exquisite chiral amplification, enable the creation of a wide variety of functional supramolecular assemblies and provide access to new supramolecular materials.

Hitting on the move: Targeting intrinsically disordered protein states of the MDM2-p53 interaction.

Intrinsically disordered proteins are an emerging class of proteins without a folded structure and currently disorder-based drug targeting remains a challenge. p53 is the principal regulator of cell division and growth whereas MDM2 consists its main negative regulator. The MDM2-p53 recognition is a dynamic and multistage process that amongst other, employs the dissociation of a transient α-helical N-terminal ''lid'' segment of MDM2 from the proximity of the p53-complementary interface. Several small molecule inhibitors have been reported to inhibit the formation of the p53-MDM2 complex with the vast majority mimicking the p53 residues Phe19, Trp23 and Leu26. Recently, we have described the transit from the 3-point to 4-point pharmacophore model stabilizing this intrinsically disordered N-terminus by increasing the binding affinity by a factor of 3. Therefore, we performed a thorough SAR analysis, including chiral separation of key compound which was evaluated by FP and 2D NMR. Finally, p53-specific anti-cancer activity towards p53-wild-type cancer cells was observed for several representative compounds.

Rapid approach to complex boronic acids.

The compatibility of free boronic acid building blocks in multicomponent reactions to readily create large libraries of diverse and complex small molecules was investigated. Traditionally, boronic acid synthesis is sequential, synthetically demanding, and time-consuming, which leads to high target synthesis times and low coverage of the boronic acid chemical space. We have performed the synthesis of large libraries of boronic acid derivatives based on multiple chemistries and building blocks using acoustic dispensing technology. The synthesis was performed on a nanomole scale with high synthesis success rates. The discovery of a protease inhibitor underscores the usefulness of the approach. Our acoustic dispensing-enabled chemistry paves the way to highly accelerated synthesis and miniaturized reaction scouting, allowing access to unprecedented boronic acid libraries.

Drug Discovery for Soft Drugs on TRPV1 and TRPM8 Channels Using the Passerini Reaction.

Multicomponent transformations, such as Ugi and Passerini reactions, allow for the fast synthesis of libraries of medium complexity, avoiding the formation of waste residues and significantly reducing time and money expenditure. Although the Ugi reaction has found a vast number of uses in medicinal chemistry, the employment of the Passerini reaction has received scant attention due to the formation of an α-acyloxyamide, which hardly resists the hydrolytic enzymes in the body. On the other hand, an overlooked possibility with the Passerini products is to exploit the presence of an ester group in the design and synthesis of soft drugs. We started to fill this gap, designing and synthesizing a series of TRPV1 and TRPM8 agonists able to act as soft drugs by using the Passerini reaction.

Borylated reagents for multicomponent reactions.

Over the past two decades, there has been an increasing interest in the therapeutic potential of organoboron reagents due to the discovery of bortezomib (Velcade). This has motivated synthetic chemists to develop novel routes for the preparation of heteroatom-rich boron-containing molecules (BCMs). In particular, the development of borylated building blocks has provided facile access to difficult-to-access heteroatom-rich BCMs. In this review, we will discuss the methods used to prepare boron-containing molecules of biological relevance from multicomponent reactions with borylated building blocks.

The Catalytic Enantioselective Ugi Four-Component Reactions.

Finally stereoselective: Enantioselective variations have been developed for many multicomponent reactions; however, it has been missing for the Ugi four-component reaction. This has now changed with the discovery of an efficient catalytic enantioselective variant for the four-component reaction of isocyanides, primary amines, aldehydes or ketones, and carboxylic acids.

Synthesis of Multi-Substituted Pyrrole Derivatives Through [3+2] Cycloaddition with Tosylmethyl Isocyanides (TosMICs) and Electron-Deficient Compounds.

Pyrrole and its polysubstituted derivatives are important five-membered heterocyclic compounds, which exist alone or as a core framework in many pharmaceutical and natural product structures, some of which have good biological activities. The Van Leusen [3+2] cycloaddition reaction based on tosylmethyl isocyanides (TosMICs) and electron-deficient compounds as a substrate, which has been continuously developed due to its advantages such as operationally simple, easily available starting materials, and broadly range of substrates, is one of the most convenient methods to synthetize pyrrole heterocycles. In this review, we discuss the different types of two carbon synthons in the Van Leusen pyrrole reaction and give a summary of the progress of these synthesis methods in the past two decades.

Dicyanamide Bridged Cu(II)36-Metallacrown-6 Complex with 1,4,7-Triisopropyl-1,4,7-Triazacyclononane and Binding Properties with DNA.

A novel 36-metallacrown-6 complex [CuL(N(CN)2)(PF6)]6∙0.5H2O 1 was achieved using a tridendate ligand, 1,4,7-triisopropyl-1,4,7-triazacyclononane (L), and a flexible ligand, dicyanamide in MeOH. The µ1,5 bridging models of the dicyanamide ligand linked the macrocycle to form in a specific size with the chair conformation. The anion was important to form this 36-metallacrown-6 complex, as change was obtained with the larger anion BPh4-, binuclear copper compound 2. The magnetic property indicates that slightly ferromagnetic interactions resulted from a superexchange mechanism. DNA binding properties were also studied. UV and fluorescence spectra showed that complex 1 could bind with DNA.

Isocyanides Derived from α,α-Disubstituted Amino Acids: Synthesis and Antifouling Activity Assessment.

Herein, we contribute to the development of environmentally friendly antifoulants by synthesizing eighteen isocyanides derived from α,α-disubstituted amino acids and evaluating their antifouling activity/toxicity against the cypris larvae of the Balanus amphitrite barnacle. Almost all isocyanides showed good antifouling activity without significant toxicity and exhibited EC50 values of 0.07 - 7.30 µg/mL after 120-h exposure. The lowest EC50 values were observed for valine-, methionine-, and phenylalanine-derived isocyanides, which achieved > 95% cypris larvae settlement inhibition at concentrations of less than 30 µg/mL without exhibiting significant toxicity. Thus, the prepared isocyanides should be useful for further research focused on the development of environmentally friendly antifouling agents.

Enantioselective electrophilic cyanation of ß-keto amides catalysed by a cinchona organocatalyst.

An operationally simple protocol for the enantioselective electrophilic α-cyanation of ß-keto amides catalyzed by cinchona-derived catalysts has been demonstrated. The resulting products could be obtained with good to high enantioselectivities (up to 88% ee) and with excellent yields (up to 94%) by employing the mild active 4-acetylphenyl cyanate as the cationic cyano source in the catalytic asymmetric α-cyanation reaction.

A modification to improve the reliability of [11 C]CN- production in the GE radiochemistry system.

We report herein a modification to a component of the GE radiochemistry system that increases the yield and reliability of [11 C]CN- production from [11 C]carbon dioxide.

Design, Synthesis, and Antifouling Activity of Glucosamine-Based Isocyanides.

Biofouling, an undesirable accumulation of organisms on sea-immersed structures such as ship hulls and fishing nets, is a serious economic issue whose effects include oil wastage and clogged nets. Organotin compounds were utilized since the 1960s as an antifouling material; however, the use of such compounds was later banned by the International Maritime Organization (IMO) due to their high toxicity toward marine organisms, resulting in masculinization and imposex. Since the ban, there have been extensive efforts to develop environmentally benign antifoulants. Natural antifouling products obtained from marine creatures have been the subject of considerable attention due to their potent antifouling activity and low toxicity. These antifouling compounds often contain isocyano groups, which are well known to have natural antifouling properties. On the basis of our previous total synthesis of natural isocyanoterpenoids, we envisaged the installation of an isocyano functional group onto glucosamine to produce an environmentally friendly antifouling material. This paper describes an effective synthetic method for various glucosamine-based isocyanides and evaluation of their antifouling activity and toxicity against cypris larvae of the barnacle Amphibalanus amphitrite. Glucosamine isocyanides with an ether functionality at the anomeric position exhibited potent antifouling activity, with EC50 values below 1 µg/mL, without detectable toxicity even at a high concentration of 10 µg/mL. Two isocyanides had EC50 values of 0.23 and 0.25 µg/mL, comparable to that of CuSO4, which is used as a fouling inhibitor (EC50 = 0.27 µg/mL).

Ammonia-Promoted One-Pot Tetrazolopiperidinone Synthesis by Ugi Reaction.

Ammonia in the tetrazole Ugi variation together with α-amino acid methyl ester-derived isocyanides provides tetrazolopiperidinones in good to high yields in one pot. The scope and limitations of this reaction were investigated by performing >70 reactions. The scaffold is useful to fill high-throughput screening decks and in structure-based drug design.

Two Cycles with One Catch: Hydrazine in Ugi 4-CR and Its Postcyclizations.

Isocyanide-based multicomponent reactions (IMCR) are by far the most versatile reactions that can construct relatively complex molecules by one-pot synthesis. More importantly, the development of post IMCR modifications significantly improves the scaffold's diversity. Here, we describe the use of N-Boc protected hydrazine together with α-amino acid derived isocyanides in the Ugi tetrazole reaction and its post cyclization under both acidic and basic conditions. The cyclization in acidic conditions was conducted in a one pot fashion, which give 7-aminotetrazolopyrazinone (6) and tetrazolotriazepinone (7) cyclic products. The post cyclization under basic condition could selectively afford Boc-protected 7-aminotetrazolopyrazinone (8) products in yield of 38-87%.