Radio frequency plasma assisted surface modification of Fe3O4 nanoparticles using polyaniline/polypyrrole for bioimaging and magnetic hyperthermia applications.

Surface modification of superparamagnetic Fe3O4 nanoparticles using polymers (polyaniline/polypyrrole) was done by radio frequency (r.f.) plasma polymerization technique and characterized by XRD, TEM, TG/DTA and VSM. Surface-passivated Fe3O4 nanoparticles with polymers were having spherical/rod-shaped structures with superparamagnetic properties. Broad visible photoluminescence emission bands were observed at 445 and 580 nm for polyaniline-coated Fe3O4 and at 488 nm for polypyrrole-coated Fe3O4. These samples exhibit good fluorescence emissions with L929 cellular assay and were non-toxic. Magnetic hyperthermia response of Fe3O4 and polymer (polyaniline/polypyrrole)-coated Fe3O4 was evaluated and all the samples exhibit hyperthermia activity in the range of 42-45 °C. Specific loss power (SLP) values of polyaniline and polypyrrole-coated Fe3O4 nanoparticles (5 and 10 mg/ml) exhibit a controlled heat generation with an increase in the magnetic field.

A photoelectrochemical enzyme biosensor based on functionalized hematite microcubes for rutin determination by square-wave voltammetry.

A photoelectrochemical biosensing strategy for the highly sensitive detection of the flavonoid rutin was developed by synergizing the photoelectrocatalytic properties of hematite (α-Fe2O3) decorated with palladium nanoparticles (PdNPs) and the biocatalysis towards laccase-based reactions. The integration of α-Fe2O3.PdNPs with a polyphenol oxidase as a biorecognition element yields a novel biosensing platform. Under visible light irradiation, the photoactive biocomposite can generate a stable photocurrent, which was found to be directly dependent upon the concentration of rutin. Under the optimal experimental conditions, the cathodic photocurrent, measured at 0.33 V vs. Ag/AgCl, from the square-wave voltammograms presented a linear dependence on the rutin concentration within the range of 0.008-30.0 × 10-8 mol L-1 (sensitivity: 1.7 µA·(× 10-8 M-1)·cm-2), with an experimental detection limit (S/N = 3) of 8.4 × 10-11 mol L-1. The proposed biosensor device presented good selectivity towards rutin in the presence of various organic compounds and inorganic ions, demonstrating the potential application of this biosensing platform in complex matrices. This bioanalytical device also exhibited excellent operational and analytical properties, such as intra-day (standard deviation, SD = 0.21%) and inter-day (SD = 1.30%) repeatability, and long storage stability (SD = 2.80% over 30 days).Graphical abstract.

Microwave assisted fast fabrication of zinc/iron oxides based polymeric nanocomposites and evaluation on equine fibroblasts.

We aimed to provide a tissue repair material, which can be synthesized rapidly, using polymers mimicking the natural environment in the extra-cellular matrix and metals/minerals. The components should have the potential to be used in tissue repair and simultaneously, reducing the side-effects of the incorporated molecules. It is challenging to manage the dispersibility of ZnO NPs in common solutions like water. Here, we report a novel method for preparing highly dispersible suspensions of ZnO NPs. In contrast to those synthesized by conventional methods, microwave assisted method allowed synthesis of dispersible ZnO NPs and the incorporation of zinc/Iron oxides NPs within alginate and gum matrix (AG) in a short span of time providing high yield of the product. The nanoformulations were characterized for size, morphology, interaction of various chemicals used during their synthesis by transmissible electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and energy dispersive X ray Spectrum. It was also evaluated for cytotoxicity and their effect on equine fibroblast cells. Microwave-assisted fabrication of zinc/iron oxides nanoparticles provided flowerlike morphology with good dispersibility and high yield in a short span of time. Our results revealed that ZnO NPs were more cytotoxic than AG ZnO NPs and doped AG Fe3O4 doped ZnO NPs at higher concentrations. Further metal nanoparticles capped with alginate/acacia with size range less than 100 nm demonstrated high stability, good biocompatibility, re-epithelization and enhanced mineralization in horse fibroblast cells.

Novel CoFe2O4@ZnO-CeO2 ternary nanocomposite: Sonochemical green synthesis using Crataegus microphylla extract, characterization and their application in catalytic and antibacterial activities.

In this study, CoFe2O4@ZnO-CeO2 magnetic nanocomposite (CoFe@Zn-Ce MNC) was successfully prepared by facile sonochemical method for the first time. CoFe@Zn-Ce MNC was obtained by green and cost-effective process in the presence of Crataegus microphylla (C. microphylla) fruit extract. Influence of some parameters like capping agents (C. microphylla, SDS and CTAB), sonication time (10, 30 and 60 min) and sonication power (40, 60 and 80 W) were studied to achieve optimum condition. The as-obtained products were characterized by FT-IR, FESEM, TEM, DRS, VSM, EDS, TGA and XRD analysis. Results showed that high magnetic properties (20.38 emug-1), 70-80 nm size and spherical morphology were unique characteristics of synthesized nanocomposite. Antibacterial activity of CoFe@Zn-Ce MNC was examined against E. coli, P. aeruginoss and S. aureus bacteria. Among theme, S. aureus as gram-positive bacteria showed excellent antibacterial activity. Furthermore, photocatalytic performance of the CoFe@Zn-Ce MNC was investigated by degradation of humic acid (HA) molecules under visible and UV light irradiations. The influence of morphology of products and incorporation of cerium oxide with CoFe2O4@ZnO on photocatalytic activity of CoFe2O4@ZnO was performed. After 100 min illumination, the decomposition of HA pollutant by magnetic nanocomposite were 97.2% and 72.4% under exposure of UV and visible light irradiations, respectively. Also, CoFe@Zn-Ce MNC demonstrated high stability in the cycling decomposition experiment after six times cycling runs.

Magnetically Recoverable TiO2/SiO2/γ-Fe2O3/rGO Composite with Significantly Enhanced UV-Visible Light Photocatalytic Activity.

In this paper, we report the preparation of a new composite (TiO2/SiO2/γ-Fe2O3/rGO) with a high photocatalytic efficiency. The properties of the composite were examined by different analyses, including X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), photoluminescence (PL), UV-Visible light diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman, vibrating-sample magnetometer (VSM), and nitrogen gas physisorption (BET) studies. The photocatalytic efficiency of the proposed composite was evaluated by the degradation of methylene blue under UV and visible light, and the results were compared with titanium dioxide (TiO2), where degradation increased from 30% to 84% and 4% to 66% under UV and visible light, respectively. The significant increase in photocatalytic activity may be explained by the higher adsorption of dye on the surface of the composite and the higher separation and transfer of charge carriers, which in turn promote active sites and photocatalytic efficiency.

Metal-Organic Frameworks with Enhanced Photodynamic Therapy: Synthesis, Erythrocyte Membrane Camouflage, and Aptamer-Targeted Aggregation.

Here, ferric oxide-loaded metal-organic framework (FeTCPP/Fe2O3 MOF) nanorice was designed and constructed by the liquid diffusion method. The introduction of iron metal nodes and the loading of Fe2O3 can effectively catalyze the Fenton reaction to produce hydroxyl radicals (•OH) and overcome the hypoxic environment of tumor tissue by generating oxygen. The monodispersity and porosity of the porphyrin photosensitizers in the MOF structure exposed more active sites, which promoted energy exchange between porphyrin molecules and oxygen molecules for photodynamic therapy (PDT) treatment. Therefore, the generated hydroxyl radicals and singlet oxygen (1O2) can synergistically act on tumor cells to achieve the purpose of improving tumor therapy. Then the erythrocyte membrane was camouflaged to enhance blood circulation and tissue residence time in the body, and finally, the targeted molecule AS1411 aptamer was modified to achieve the high enrichment of MOF photosensitizers on a tumor domain. As a result, the MOF nanorice camouflaged by the erythrocyte membrane can effectively reduce side effects and improve the therapeutic effect of PDT and chemo-dynamic therapy (CDT). The study not only improved the efficacy of PDT and CDT in essence from the MOF nanorice but also used the camouflage method to further concentrate FeTCPP/Fe2O3 on the tumor sites, achieving the goal of multiple gains. These results will provide theoretical and practical directions for the development of tumor-targeted MOF nanomaterials.

Eco-benign approach to synthesize spherical iron oxide nanoparticles: A new insight in photocatalytic and biomedical applications.

Iron oxide nanoparticles (Fe2O3NPs) are an interested and attractive area of research as they have numerous effective environmental and biomedical applications. Herein we have reported a simple and eco-benign synthesis Fe2O3NPs using Tamarix aphylla extract. The extract of the Tamarix aphylla acts both as a reducing and capping agent which leads to the fast and successful eco-benign synthesis of Fe2O3NPs.UV/Vis spectroscopy, XRD, EDX, SEM and TEM techniques were used to characterize and explore different features of Fe2O3NPs. UV/Vis studies showed asharppeak at 390 nm due to surface plasmon resonance absorption of Fe2O3NPs. XRD studies indicated that Fe2O3NPs were crystalline in nature. Structural features, elemental composition and geometry of Fe2O3NPswere confirmed by SEM, EDX and TEM. The as synthesized Fe2O3NPs showed efficient efficacy to degrade 100% of Methylene blue (MB) dye by 4 mg/25 ml MB and revealed 90% scavenging of the more stable DPPH free radical(1 mg/ml). Furthermore, Fe2O3NPs showed excellent antimicrobial activity against pathogenic multidrug resistant bacterial strains. The results of the present study explored the potential reducing, capping property of Tamarix aphylla extract, photocatalytic and biomedical applications of eco-benignly synthesized Fe2O3NPs which could be an alternative material for effective remediation of lethal organic pollutants and microbes.

Catalytic degradation of p-nitrophenol by magnetically recoverable Fe3O4 as a persulfate activator under microwave irradiation.

In this study, Fe3O4 and microwave (MW) were combined to activate persulfate (PS) for the removal of organic matter, resulting in the enhanced degradation of p-nitrophenol (PNP) in solution. During the preparation of Fe3O4, the effect of sodium acetate was examined, and the results showed that the concentration of sodium acetate had little effect on the catalytic activity of the Fe3O4/PS/MW system but did have an effect on the Fe3O4 yield. In addition, with regards to the representative environmental factors, the degradation experiment showed that humic acid and the co-existing anions of chloride, sulfate, nitrate, and phosphate had little effects on p-nitrophenol removal; however, carbonate had a negative effect. In addition, the Fe3O4/PS/MW system performed well in the initial pH range of 3.0-9.0. According to the quenching experiment and electron paramagnetic resonance (EPR) detection, sulfate radicals and a minority of hydroxyl radicals play dominant roles in the degradation process. In addition, the role of Fe3O4 was confirmed to take part in the degradation process by X-ray photoelectron spectroscopy (XPS) analysis. Because of the good performance observed in the water matrices of tap water and the Songhua River, these results demonstrate the potential application of the Fe3O4/PS/MW system for wastewater treatment.

Environmentally friendly synthesized and magnetically recoverable designed ferrite photo-catalysts for wastewater treatment applications.

Fenton processes are promising wastewater treatment alternatives for bio-recalcitrant compounds. Three different methods (i.e., reverse microemulsion, sol-gel, and combustion) were designed to synthesize environmentally friendly ferrites as magnetically recoverable catalysts to be applied for the decomposition of two pharmaceuticals (ciprofloxacin and carbamazepine) that are frequently detected in water bodies. The catalysts were used in a heterogeneous solar photo-Fenton treatment to save the cost of applying high-energy UV radiation sources, and was performed under a slightly basic pH to avoid metal leaching and adding salts for pH adjustment. All the developed catalysts resulted in the effective treatment of ciprofloxacin and carbamazepine in both synthetic and real domestic wastewater. In particular, the sol-gel synthesized ferrite was more magnetic and more suitable for reuse. The degradation pathways of both compounds were elucidated for this treatment. The degradation of ciprofloxacin involved attacks to the quinolone and piperazine rings. The degradation pathway of carbamazepine involved the formation of hydroxyl carbamazepine and dihydroxy carbamazepine before yielding acridine by hydrogen abstraction, decarboxylation, and amine cleavage, which would be further oxidized.

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Hexavalent Chromium and Methylene Blue by g-C3N4/BiFeO3/Carbon Nanotubes Ternary Composites.

A novel graphite-phase carbon nitride (g-C3N4)/bismuth ferrite (BiFeO3)/carbon nanotubes (CNTs) ternary magnetic composite (CNBT) was prepared by a hydrothermal synthesis. Using this material, Cr(VI) and methylene blue (MB) were removed from wastewater through synergistic adsorption and photocatalysis. The effects of pH, time, and pollutant concentration on the photocatalytic performance of CNBT, as well as possible interactions between Cr(VI) and MB species were analyzed. The obtained results showed that CNTs could effectively reduce the recombination rate of electron-hole pairs during the photocatalytic reaction of the g-C3N4/BiFeO3 composite, thereby improving its photocatalytic performance, while the presence of MB increased the reduction rate of Cr(VI). After 5 h of the simultaneous adsorption and photocatalysis by CNBT, the removal rates of Cr(VI) and MB were 93% and 98%, respectively. This study provides a new theoretical basis and technical guidance for the combined application of photocatalysis and adsorption in the treatment of wastewaters containing mixed pollutants.

Construction of novel Z-scheme Ag/ZnFe2O4/Ag/BiTa1-xVxO4 system with enhanced electron transfer capacity for visible light photocatalytic degradation of sulfanilamide.

A novel Z-scheme system, Ag/ZnFe2O4/Ag/BiTa1-xVxO4 with enhanced electron transfer capacity was constructed for degrading sulfanilamide (SAM) using solar light. The photocatalytic activity of Ag/ZnFe2O4/Ag/BiTa1-xVxO4 was investigated. The effects of the mass ratio (ZnFe2O4:BiTaO4), doped V dose, Ag wt.% content, and irradiation time on the catalytic performance were evaluated. The reasonable mechanism of Ag/ZnFe2O4/Ag/BiTa1-xVxO4 solar photocatalytic degradation was also presented. These results reveal Ag/ZnFe2O4/Ag/BiTa1-xVxO4 possesses enhanced photocatalytic performance. The loaded Ag as electron mediator increases the electron transfer rate. Particularly, the doped V and the Fe ions from ZnFe2O4 form a powerful electron driving force, which enhances the electron transfer capacity. Ag/ZnFe2O4/Ag/BiTa1-xVxO4 shows optimal photocatalytic performance at 2.0 wt.% Ag and 0.5% doped V dose (ZnFe2O4:BiTaO4 = 1.0:0.5). Also, Ag/ZnFe2O4/Ag/BiTa1-xVxO4 exhibits high stability and repeatability in photocatalytic degradation. Several active species (•OH, •O2-, and h+) are produced in the Z-scheme photodegradation of SAM. These results on the enhanced photocatalytic activity of Ag/ZnFe2O4/Ag/BiTa1-xVxO4 are ascribed to synergistic photocatalytic effects of ZnFe2O4 and BiTa1-xVxO4 mediated through Ag and driven by doped V and Fe ions. Therefore, the Z-scheme Ag/ZnFe2O4/Ag/BiTa1-xVxO4 photocatalytic technology proves to be promising for the solar photocatalytic treatment of antibiotics under solar light.

Photocatalytic degradation of deoxynivalenol over dendritic-like α-Fe2O3 under visible light irradiation.

Deoxynivalenol (DON) is a secondary metabolite produced by Fusarium, which is a trichothecene mycotoxin. As the main mycotoxin with high toxicity, wheat, barley, corn and their products are susceptible to contamination of DON. Due to the stability of this mycotoxin, traditional methods for DON reduction often require a strong oxidant, high temperature and high pressure with more energy consumption. Therefore, exploring green, efficient and environmentally friendly ways to degrade or reduce DON is a meaningful and challenging issue. Herein, a dendritic-like α-Fe2O3 was successfully prepared using a facile hydrothermal synthesis method at 160 °C, which was systematically characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). It was found that dendritic-like α-Fe2O3 showed superior activity for the photocatalytic degradation of DON in aqueous solution under visible light irradiation (λ > 420 nm) and 90.3% DON (initial concentration of 4.0 µg/mL) could be reduced in 2 h. Most of all, the main possible intermediate products were proposed through high performance liquid chromatography-mass spectrometry (HPLC-MS) after the photocatalytic treatment. This work not only provides a green and promising way to mitigate mycotoxin contamination but also may present useful information for future studies.

Wide spectral degradation of Norfloxacin by Ag@BiPO4/BiOBr/BiFeO3 nano-assembly: Elucidating the photocatalytic mechanism under different light sources.

Metallic Ag deposited BiPO4/BiOBr/BiFeO3 ternary nano-hetero-structures were rationally designed and synthesized by a simple precipitation-wet impregnation-photo deposition method. The plasmonic junction possesses an excellent wide spectrum photo-response and makes best use of BiPO4 which is otherwise a poor photocatalyst. Ag@BiPO4/BiOBr/BiFeO3 showed superior photocatalytic activity for degradation of norfloxacin (NFN) under visible, ultra-violet, near-infra-red and natural solar light. Especially catalyst APBF-3 (0.3 wt% Ag@BiPO4/BiOBr/BiFeO3) shows 98.1% degradation of NFN (20 mg/L) in 90 min under visible light and 99.1% in less than 45 min under UV exposure. Free radical scavenging experiments and electron spin resonance (ESR) results has been used for explanation of charge transfer, photocatalytic mechanism and role of radicals for binary, ternary and Ag deposited ternary junctions for UV and visible exposure. Metallic Ag in addition to its surface plasmon resonance helps in protection of high conduction band and valence band in the three semiconductors. A dual Z-scheme mechanism has been predicted by comparing with possibilities of double charge and vectorial charge transfer.

Biocompatible FeOOH-Carbon quantum dots nanocomposites for gaseous NOx removal under visible light: Improved charge separation and High selectivity.

Development of biocompatible photocatalysts with improved charge separation and high selectivity is essential for effective removal of air pollutants. Iron-containing catalysts have attracted extensive attention due to their low-toxicity and high natural abundance. Here, carbon quantum dots (CQDs) modified FeOOH nanocomposites fabricated using a facile hydrothermal route showed enhanced NO removal efficiency (22%) compared to pure FeOOH. Moreover, generation of toxic NO2 intermediates was significantly inhibited using the nanocomposites, demonstrating high selectivity for final nitrate formation. Photo-electrochemical results showed that both charge separation and transfer efficiency were significantly improved by CQDs addition, and the lifetime of photo-generated carriers was increased eventually. Density functional theory calculations further elucidated that the suppressed recombination of photo-induced electron-hole pairs was due to enhanced electron migration from the FeOOH to CQDs. A NO degradation mechanism was proposed based on detection of the reactive oxygen species using electron paramagnetic spectroscopy. In addition, the nanocomposite showed good biocompatibility and low cytotoxity, ensuring minimal environmental impact for potential application in large-scale.

Gold Nanoparticles Decorated Hematite Photoelectrode for Sensitive and Selective Photoelectrochemical Aptasensing of Lysozyme.

Photoelectrochemical aptasensor (PECAS) is a new and promising detection platform with both high sensitivity and good selectivity. Exploration of new photoelectrode materials and establishment of effective charge transfer channel between photoelectrode and aptamer are the main challenges in this field. In this work, an efficient PECAS based on Au nanoparticles (NPs) decorated Fe2O3 nanorod photoelectrode is rationally designed, fabricated, and exhibited excellent sensitivity and selectivity for detection of lysozyme (Lys) with an ultralow detection limit of 3 pM and wide detection range from 10 pM to 100 nM. The Au NPs not only act as anchor to establish an efficient charge transfer channel between the photoelectrode and the aptamer, but also help to enhance the PEC performance through adjusting the carrier density of Fe2O3. The rationally designed photoelectrode opens up a distinctive avenue for promoting the PECAS to be a versatile analysis method.

Iron oxide-mediated semiconductor photocatalysis vs. heterogeneous photo-Fenton treatment of viruses in wastewater. Impact of the oxide particle size.

The photo-Fenton process is recognized as a promising technique towards microorganism disinfection in wastewater, but its efficiency is hampered at near-neutral pH operating values. In this work, we overcome these obstacles by using the heterogeneous photo-Fenton process as the default disinfecting technique, targeting MS2 coliphage in wastewater. The use of low concentrations of iron oxides in wastewater without H2O2 (wüstite, maghemite, magnetite) has demonstrated limited semiconductor-mediated MS2 inactivation. Changing the operational pH and the size of the oxide particles indicated that the isoelectric point of the iron oxides and the active surface area are crucial in the success of the process, and the possible underlying mechanisms are investigated. Furthermore, the addition of low amounts of Fe-oxides (1mgL-1) and H2O2 in the system (1, 5 and 10mgL-1) greatly enhanced the inactivation process, leading to heterogeneous photo-Fenton processes on the surface of the magnetically separable oxides used. Additionally, photo-dissolution of iron in the bulk, lead to homogeneous photo-Fenton, further aided by the complexation by the dissolved organic matter in the solution. Finally, we assess the impact of the presence of the bacterial host and the difference caused by the different iron sources (salts, oxides) and the Fe-oxide size (normal, nano-sized).

Use of Spectroscopic Techniques for Evaluating the Coupling of Porphyrins on Biocompatible Nanoparticles. A Potential System for Photodynamics, Theranostics, and Nanodrug Delivery Applications.

Modern medicine has been searching for new and more efficient strategies for diagnostics and therapeutics applications. Considering this, porphyrin molecules have received great interest for applications in photodiagnostics and phototherapies, even as magnetic nanoparticles for drug-delivery systems and magnetic-hyperthermia therapy. Aiming to obtain a multifunctional system, which combines diagnostics with therapeutic functions on the same platform, the present study employed UV/vis absorption and fluorescence spectroscopies to evaluate the interaction between meso-tetrakis(p-sulfonatofenyl)porphyrin (TPPS) and maghemite nanoparticles (γ-Fe2O3). These spectroscopic techniques allowed us to describe the dynamics of coupling porphyrins on nanoparticles and estimate the number of 21 porphyrins per nanoparticle. Also, the binding parameters, such as the association constants (Ka = 8.89 × 105 M-1) and bimolecular quenching rate constant (kq = 2.54 × 1014 M-1 s-1) were obtained. These results suggest a static quenching process where the electrostatic attraction plays an essential role. The work shows that spectroscopic techniques are powerful tools to evaluate the coupling of organic molecules and nanoparticles. Besides, the system studied provides a relevant background for potential applications in bionanotechnology and nanomedicine, such as (1) nanodrug delivery system, (2) photodiagnostics/theranostics, and/or (3) a combined action of photodynamic and hyperthermia therapies, working in a synergetic way.

Acoustic Cluster Therapy: In Vitro and Ex Vivo Measurement of Activated Bubble Size Distribution and Temporal Dynamics.

Acoustic cluster technology (ACT) is a two-component, microparticle formulation platform being developed for ultrasound-mediated drug delivery. Sonazoid microbubbles, which have a negative surface charge, are mixed with micron-sized perfluoromethylcyclopentane droplets stabilized with a positively charged surface membrane to form microbubble/microdroplet clusters. On exposure to ultrasound, the oil undergoes a phase change to the gaseous state, generating 20- to 40-µm ACT bubbles. An acoustic transmission technique is used to measure absorption and velocity dispersion of the ACT bubbles. An inversion technique computes bubble size population with temporal resolution of seconds. Bubble populations are measured both in vitro and in vivo after activation within the cardiac chambers of a dog model, with catheter-based flow through an extracorporeal measurement flow chamber. Volume-weighted mean diameter in arterial blood after activation in the left ventricle was 22 µm, with no bubbles >44 µm in diameter. After intravenous administration, 24.4% of the oil is activated in the cardiac chambers.

Photochemical transformation of an iron(III)-arsenite complex in acidic aqueous solution.

Surface complexation between arsenious acid anions (As(III)) and ferric (hydr)oxides in water is important for the transformation and transfer of inorganic arsenic species. The mechanisms of formation and the photochemistry of dissolved Fe(III)-As(III) complexes in acidic aqueous solution are still unclear. Here, the photooxidation of As(III) in the presence of Fe(III) ions in acidic media has been investigated by laser flash and steady-state photolysis. At low arsenite concentrations (<1 mM), As(III) is oxidized by the ˙OH radical generated by photolysis of the FeOH(2+) complex. At higher arsenite concentrations (>10 mM), photoactive Fe(III)-As(III) complexes are formed (ϕ≈ 0.012). At all arsenite concentrations, a white FeAsO4 colloid is formed during As(III) photolysis in the presence of Fe(III) ions. Solid Fe(III)-As(III) complexes have been prepared and characterized, and the photochemical transformation of As(III) into As(V) in solid Fe(III)-As(III) complexes has been confirmed. These findings are important for a better understanding of the evolution of As(III) species under environmental conditions and should provide guidance for detoxification of As(III)-polluted water systems.

Effect of nitrate enrichment and diatoms on the bioavailability of Fe(III) oxyhydroxide colloids in seawater.

The photoconversion of colloidal iron oxyhydroxides was a significant source of bioavailable iron in coastal systems. Diatoms dominate phytoplankton communities in coastal and upwelling regions. Diatoms are often exposed to eutrophication. We investigated the effects of different species of diatom, cell density, illumination period, and nitrate additions on the bioavailability of Fe(III) oxy-hydroxide colloids in seawaters. With the increase of illumination period from 1 to 4 h, the ratios of concentrations of total dissolved Fe (DFe) to colloidal iron oxyhydroxides and Fe(II) to DFe increased up to 24.3% and 23.9% for seawater without coastal diatoms, 45.6% and 30.2% for Skeletonema costatum, 44.3% and 29.7% for Thalassiosira weissflogii, respectively. The photochemical activity of coastal diatoms themselves (excluding the dissolved organic matter secreted by algae) on the species transformation of iron in seawater (including the light-induced dissolution of Fe(III) oxyhydroxide colloids and the photo-reduction of Fe(III) into Fe(II)) was confirmed for the first time. There was no significant difference of the ability of S. costatum and Thalassiosira weissflogii on the photoconversion of colloidal iron oxyhydroxides. The photoproduction of dissolved Fe(II) and DFe in the seawater with or without diatoms could be depressed by the nitrate addition.