Paclitaxel-loaded and folic acid-modified PLGA nanomedicine with glutathione response for the treatment of lung cancer.

Targeted delivery and smart response of nanomedicine hold great promise for improving the therapeutic efficacy and alleviating the side effects of chemotherapy agents in cancer treatment. However, availability of only a few studies that discuss organic nanomedicines with these properties limits the development prospects of nanomedicines. In the present study, folic acid (FA)-targeted delivery and glutathione (GSH) smart responsive nanomedicine were rationally designed for paclitaxel (PTX) delivery for the treatment of lung cancer. Compared with other stimuli-responsive nanomedicines, this nanocarrier was not only sensitive to biologically relevant GSH for on-demand drug release but also biodegradable into biocompatible products after fulfilling its delivery task. The nanomedicine first entered tumor cells via FA and its receptor-mediated endocytosis. After the lysosomal escape, poly(lactic-co-glycolic acid) (PLGA) nanomedicine was triggered by a higher level of GSH and released its cargo into the tumor microenvironment. In vitro and in vivo results revealed that the PLGA nanomedicine not only inhibited the proliferation and promoted the apoptosis of lung cancer cells significantly but also possessed less toxic side effects when compared with free PTX. Therefore, the proposed drug delivery system demonstrates the potential of a multifunctional nano-platform to enhance bioavailability and reduce the side effects of chemotherapy agents.

Chitosan coated nanoparticles for efficient delivery of bevacizumab in the posterior ocular tissues via subconjunctival administration.

In several ocular diseases, vascular endothelial growth factor (VEGF) level has been found to be unregulated. Bevacizumab, an anti-VEGF drug, is the most commonly used off level drug for diabetic retinopathy (DR). The present study was to evaluate the chitosan-coated poly (lactide-co-glycolic acid) nanoparticles (CS-PLGA NPs) for sustained and effective delivery of bevacizumab to posterior ocular tissues. The penetration of NP through sclera was studied by confocal laser scanning microscopy (CLSM). For pharmacokinetic study, bevacizumab loaded NPs were administered into the rat eye through subconjunctival injection (SCJ) and pharmacokinetic parameters were compared to drug solution. CLSM and pharmacokinetic study showed better penetration of formulation and higher concentration of bevacizumab in posterior ocular tissues. In retinopathy model, CS-PLGA NPs by SCJ route showed more reduction of VEGF level in retina than the topical and intravitreal administration of formulation. Thus, CS-coated PLGA NPs can be potentially useful as carriers to target retina.

Combined local delivery of tacrolimus and stem cells in hydrogel for enhancing peripheral nerve regeneration.

The application of scaffold-based stem cell transplantation to enhance peripheral nerve regeneration has great potential. Recently, the neuroregenerative potential of tacrolimus (a U.S. Food and Drug Administration-approved immunosuppressant) has been explored. In this study, a fibrin gel-based drug delivery system for sustained and localized tacrolimus release was combined with rat adipose-derived mesenchymal stem cells (MSC) to investigate cell viability in vitro. Tacrolimus was encapsulated in poly(lactic-co-glycolic) acid (PLGA) microspheres and suspended in fibrin hydrogel, using concentrations of 0.01 and 100 ng/ml. Drug release over time was measured. MSCs were cultured in drug-released media collected at various days to mimic systemic exposure. MSCs were combined with (i) hydrogel only, (ii) empty PLGA microspheres in the hydrogel, (iii) 0.01, and (iv) 100 ng/ml of tacrolimus PLGA microspheres in the hydrogel. Stem cell presence and viability were evaluated. A sustained release of 100 ng/ml tacrolimus microspheres was observed for up to 35 days. Stem cell presence was confirmed and cell viability was observed up to 7 days, with no significant differences between groups. This study suggests that combined delivery of 100 ng/ml tacrolimus and MSCs in fibrin hydrogel does not result in cytotoxic effects and could be used to enhance peripheral nerve regeneration.

Nerve conduit based on HAP/PDLLA/PRGD for peripheral nerve regeneration with sustained release of valproic acid.

The nerve conduits have been developed for nerve defect repair. However, no artificial conduits have obtained comparable results to autografts to bridge the large gaps. A possible reason for this poor performance may be a lack of sustainable neurotrophic support for axonal regrowth. Previous studies suggested nanocomposite conduits can be used as a carrier for valproic acid (VPA), a common drug that can produce effects similar to the neurotrophic factors. Here, we developed the novel bioabsorbable conduits based on hydroxyapatite/poly d-l-lactic acid (PDLLA)/poly{(lactic acid)-co-[(glycolic acid)-alt-(l-lysine)]} with sustained release of VPA. Firstly, the sustained release of VPA in this conduit was examined by high-performance liquid chromatography. Then Schwann cells were treated with the conduit extracts. The cell metabolic activity and proliferation were assayed by 3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl-2-tetrazolium bromide and bromodeoxyuridine staining. A 10-mm segment of rat sciatic nerve was resected and then repaired, respectively, using the VPA conduit (Group A), the PDLLA conduit (Group B), or the autografts (Group C). Nerve conduction velocities (NCVs), compound muscle action potentials (CMAPs), and histological staining were assayed following the surgery. The cell metabolic activity and proliferation were significantly increased (p < .05) by the extracts from VPA-conduit extract compared to others. NCVs and CMAPs were significantly higher in Groups A and C than Group B (p < .05). The nerve density of Groups A and C was higher than Group B. There was no significant difference between Groups A and C. Taken together, this study suggested the sustained-release VPA conduit promoted peripheral nerve regeneration that was comparable to the autografts. It holds potential for future use in nerve regeneration.

Biodegradable Nanoparticles-Loaded PLGA Microcapsule for the Enhanced Encapsulation Efficiency and Controlled Release of Hydrophilic Drug.

Recently, nano- and micro-particulate systems have been widely utilized to deliver pharmaceutical compounds to achieve enhanced therapeutic effects and reduced side effects. Poly (DL-lactide-co-glycolide) (PLGA), as one of the biodegradable polyesters, has been widely used to fabricate particulate systems because of advantages including controlled and sustained release, biodegradability, and biocompatibility. However, PLGA is known for low encapsulation efficiency (%) and insufficient controlled release of water-soluble drugs. It would result in fluctuation in the plasma levels and unexpected side effects of drugs. Therefore, the purpose of this work was to develop microcapsules loaded with alginate-coated chitosan that can increase the encapsulation efficiency of the hydrophilic drug while exhibiting a controlled and sustained release profile with reduced initial burst release. The encapsulation of nanoparticles in PLGA microcapsules was done by the emulsion solvent evaporation method. The encapsulation of nanoparticles in PLGA microcapsules was confirmed by scanning electron microscopy and confocal microscopy. The release profile of hydrophilic drugs can further be altered by the chitosan coating. The chitosan coating onto alginate exhibited a less initial burst release and sustained release of the hydrophilic drug. In addition, the encapsulation of alginate nanoparticles and alginate nanoparticles coated with chitosan in PLGA microcapsules was shown to enhance the encapsulation efficiency of a hydrophilic drug. Based on the results, this delivery system could be a promising platform for the high encapsulation efficiency and sustained release with reduced initial burst release of the hydrophilic drug.

Conformable hierarchically engineered polymeric micromeshes enabling combinatorial therapies in brain tumours.

The poor transport of molecular and nanoscale agents through the blood-brain barrier together with tumour heterogeneity contribute to the dismal prognosis in patients with glioblastoma multiforme. Here, a biodegradable implant (µMESH) is engineered in the form of a micrometre-sized poly(lactic-co-glycolic acid) mesh laid over a water-soluble poly(vinyl alcohol) layer. Upon poly(vinyl alcohol) dissolution, the flexible poly(lactic-co-glycolic acid) mesh conforms to the resected tumour cavity as docetaxel-loaded nanomedicines and diclofenac molecules are continuously and directly released into the adjacent tumour bed. In orthotopic brain cancer models, generated with a conventional, reference cell line and patient-derived cells, a single µMESH application, carrying 0.75 mg kg-1 of docetaxel and diclofenac, abrogates disease recurrence up to eight months after tumour resection, with no appreciable adverse effects. Without tumour resection, the µMESH increases the median overall survival (∼30 d) as compared with the one-time intracranial deposition of docetaxel-loaded nanomedicines (15 d) or 10 cycles of systemically administered temozolomide (12 d). The µMESH modular structure, for the independent coloading of different molecules and nanomedicines, together with its mechanical flexibility, can be exploited to treat a variety of cancers, realizing patient-specific dosing and interventions.

Multiple-Coated PLGA Nanoparticles Loading Triptolide Attenuate Injury of a Cellular Model of Alzheimer's Disease.

Alzheimer's disease (AD) is the most common neurodegenerative disease, which is associated with extracellular deposition of amyloid-ß proteins (Aß). It has been reported that triptolide (TP), an immunosuppressive and anti-inflammatory agent extracted from a Chinese herb Tripterygium wilfordii, shows potential neuroprotective effects pertinent to AD. However, the clinical use of TP for AD could be hampered due to its high toxicity, instability, poor water solubility, and nonspecific biodistribution after administration. In this paper, we reported a kind of multiple-coated PLGA nanoparticle with the entrapment of TP and surface coated by chitosan hydrochloride, Tween-80, PEG20000, and borneol/mentholum eutectic mixture (MC-PLGA-TP-NP) as a novel nasal brain targeting preparation for the first time. The obtained MC-PLGA-TP-NP was 147.5 ± 20.7 nm with PDI of 0.263 ± 0.075, zeta potential of 14.62 ± 2.47 mV, and the entrapment efficiency and loading efficiency of 93.14% ± 4.75% and 1.17 ± 0.08%, respectively. In comparison of TP, MC-PLGA-TP-NP showed sustained-release profile and better transcellular permeability to Caco-2 cells in vitro. In addition, our data showed that MC-PLGA-TP-NP remarkably reduced the cytotoxicity, attenuated the oxidative stress, and inhibited the increase of the intracellular Ca2+ influx in differentiated PC12 cells induced by Aß 1-42. Therefore, it can be concluded that MC-PLGA-TP-NP is a promising preparation of TP, which exerts a better neuroprotective activity in the AD cellular model.

An overview of gastrointestinal mucus rheology under different pH conditions and introduction to pH-dependent rheological interactions with PLGA and chitosan nanoparticles.

This review discusses the physicochemical and mechanical properties of porcine gastrointestinal mucus from a rheological point of view. Considering mucus as a viscoelastic gel that functions as a biological barrier by limiting particles passage, lubricating the gastrointestinal tract, and protecting the stomach from gastric acids. The viscoelastic and protective properties of mucus are mainly produced by its mucin network, which is stabilized through electrostatic, hydrophobic and hydrogen bonding interactions. Otherwise, mucus rheology is determined by its polyanionic nature at physiological pH. At neutral pH, mucus presents a viscous behavior produced by chains crosslinking. While, at acidic pH, mucus exhibits an elastic behavior related with the extended conformation that produces mucus gelation at the stomach. Additionally, rheology studies the degree of adhesion between a polymer-mucus mixture through rheological synergism, and how it varies at different pH conditions. Finally, mucoadhesion phenomenon is exemplified with chitosan (cationic) and poly (lactic-co-glycolic) acid (anionic) polymers.

Cellular uptake of polymeric nanoparticles by bovine cumulus-oocyte complexes and their effect on in vitro developmental competence.

Polymeric nanoparticles (NPs) are produced using bio-compatible and bio-degradable materials such as PLGA (Poly(lactic-co-glycolic acid)). This technology provides a valuable tool to deliver molecules to the subcellular level with a relatively low risk of cytotoxicity. However their use in the field of reproductive biotechnology is not yet scientifically substantiated. The aim of the present study was to test if PLGA NPs can be taken-up by cumulus-enclosed oocytes as a first step towards potential oocyte-targeted applications to enhance oocyte quality and fertility. We conducted a series of experiments using bovine in vitro oocyte maturation as a model to study FITC-conjugated PLGA internalization (using laser-scanning confocal microscopy) and the effect of some important physical (particle size) and chemical (conjugation with PEG) modifications. We show evidence that PLGA NPs can be taken-up by cumulus cells and to a less extent by the enclosed oocytes regardless of the NP size. The NP transfer to the oocyte appear to be transcellular (via cumulus cells and transzonal projections) and paracellular (via zona pellucida). The PLGA NPs were detected in the vicinity of the oocyte as quick as 2 h post-exposure in a protein-free medium and did not compromise cumulus cell viability nor subsequent early embryo development or embryo quality. These results suggest that PLGA NPs may have promising applications as carriers for drug or molecule delivery targeting cumulus cells and oocytes.

Effects of oxygen generating scaffolds on cell survival and functional recovery following acute spinal cord injury in rats.

Persistent local oxygen delivery is crucial to create a microenvironment for cell survival and nerve regeneration in acute spinal cord injury (SCI). This study aimed to fabricate calcium peroxide-based microspheres incorporated into a 3-D construct scaffold as a novel oxygen release therapy for SCI. The scaffolds were able to generate oxygen over the course of 21 days when incubated under hypoxic conditions. In vitro, GFP-labeled bone marrow-derived mesenchymal stem cells (MSCs) were planted into the scaffolds. We observed that scaffolds could enhance MSC survival under hypoxic conditions for more than 21 days. Oxygen generating scaffolds were transplanted into spinal cord injury sites of rats in vivo. Twelve weeks following transplantation, cavity areas in the injury/graft site were significantly reduced due to tissue regeneration. Additionally, the oxygen generating scaffolds improved revascularization as observed through vWF immunostaining. A striking feature was the occurrence of nerve fiber regeneration in the lesion sites, which eventually led to significant locomotion recovery. The present results indicate that the oxygen generating scaffolds have the property of sustained local oxygen release, thus facilitating regeneration in injured spinal cords.

Long-term sustained release Poly(lactic-co-glycolic acid) microspheres of asenapine maleate with improved bioavailability for chronic neuropsychiatric diseases.

Schizophrenia and bipolar disorder are severe chronic neuropsychiatric diseases, affecting hundreds of millions of people worldwide. Asenapine maleate (ASM) has been demonstrated as a safe and effective therapeutic agent under twice-daily administration. However, lower compliance is observed when patients are treated with ASM, which significantly limits its application in schizophrenia and bipolar disorder. Moreover, the low bioavailability of ASM caused by first-pass metabolism and poor aqueous solubility also impairs the treatment effect. A formulation of ASM with the property of long-term sustained release and improved bioavailability can be a solution to overcome these weaknesses. In this article, we prepared ASM-loaded poly(lactic-co-glycolic acid) (ASM-PLGA) microspheres through different techniques, including emulsification-solvent evaporation (ESE), Shirasu porous glass membrane emulsification (SPG-ME), and microfluidic method. In vitro and in vivo assessments demonstrated that uniform-sized microspheres generated by the microfluidic process sustainably released ASM throughout 40-days, showing low burst release and significantly improved bioavailability. The results suggest that ASM-PLGA microspheres prepared by the microfluidic method provide an efficient strategy to enhance the drug exposure of ASM as the treatment of chronic neuropsychiatric diseases. It is also evident that this microfluidic strategy has the potential to construct with other drugs, establishing long-acting formulations.

The impact of size and charge on the pulmonary pharmacokinetics and immunological response of the lungs to PLGA nanoparticles after intratracheal administration to rats.

Polylactide-co-glycolide (PLGA) nanoparticles are one of the most commonly explored biodegradable polymeric drug carriers for inhaled delivery. Despite their advantages as inhalable nanomedicine scaffolds, we still lack a complete understanding of the kinetics and major pathways by which these materials are cleared from the lungs. This information is important to evaluate their safety over prolonged use and enable successful clinical translation. This study aimed to determine how the size and charge of 3H-labeled PLGA nanoparticles affect the kinetics and mechanisms by which they are cleared from the lungs and their safety in the lungs. The results showed that lung clearance kinetics and retention patterns were more significantly defined by particle size, whereas lung clearance pathways were largely influenced by particle charge. Each of the nanoparticles caused transient inflammatory changes in the lungs after a single dose that reflected lung retention times.

Engineering large porous microparticles with tailored porosity and sustained drug release behavior for inhalation.

Sustained drug delivery is considered as an effective strategy to improve the treatment of local lung diseases. In this context, inhalation administration of large porous microparticles (LPPs) represents promising prospects. However, one major challenge with said delivery technology is to control the drug release pattern (especially to decrease the burst release) while maintaining a low mass density/high porosity, which is of high significance for the aerodynamic behavior of LPP systems. Here, we show how to engineer drug-loaded, biodegradable LPPs with varying microstructure by means of a premix membrane emulsification-solvent evaporation (PME-SE) method using poly(vinyl pyrrolidone) (PVP) as the pore former. The influence of PVP concentration on the physicochemical properties, in-vitro drug release behavior and in-vitro aerodynamic performance of the drug-loaded microparticles was tested. We demonstrated that the PME-SE technique led to LPPs with favorable pore distribution characteristics (i.e., low external but high internal porosity) as a function of the PVP concentration. In general, more PVP conditioned a larger discrepancy of the internal vs. external porosity. When the external porosity of the LPP formulation (15% of PVP during the manufacturing process) was less than 3%, the burst release of the embedded drug was significantly reduced compared to LPPs prepared by a "conventional" emulsification solvent evaporation method. All the formulations prepared by the PME-SE method had aerodynamic properties suitable for inhalation. This is the first report indicating that the microstructure of LPPs can be tailored using the PME-SE technology with PVP as a suitable pore former. Doing so, we designed LPP formulations having full control over the drug release kinetics and aerodynamic behavior.

Silica particles incorporated into PLGA-based in situ-forming implants exploit the dual advantage of sustained release and particulate delivery.

Poly (lactic-co-glycolic acid) (PLGA) in situ-forming implants are well-established drug delivery systems for controlled drug release over weeks up to months. To prevent initial burst release, which is still a major issue associated with PLGA-based implants, drugs attached to particulate carriers have been encapsulated. Unfortunately, former studies only investigated the resulting release of the soluble drugs and hence missed the potential offered by particulate drug release. In this study, we developed a system capable of releasing functional drug-carrying particles over a prolonged time. First, we evaluated the feasibility of our approach by encapsulating silica particles of different sizes (500 nm and 1 µm) and surface properties (OH or NH2 groups) into in situ-forming PLGA implants. In this way, we achieved sustained release of particles over periods ranging from 30 to 70 days. OH-carrying particles were released much more quickly when compared to NH2-modified particles. We demonstrated that the underlying release mechanisms involve size-dependent diffusion and polymer-particle interactions. Second, particles that carried covalently-attached ovalbumin (OVA) on their surfaces were incorporated into the implant. We demonstrated that OVA was released in association with the particles as functional entities over a period of 30 days. The released particle-drug conjugates maintained their colloidal stability and were efficiently taken up by antigen presenting cells. This system consisting of particles incorporated into PLGA-based in situ-forming implants offers the dual advantage of sustained and particulate release of drugs as a functional unit and has potential for future use in many applications, particularly in single-dose vaccines.

Design and evaluation of the anticancer activity of paclitaxel-loaded anisotropic-poly(lactic-co-glycolic acid) nanoparticles with PEGylated chitosan surface modifications.

This study aimed to evaluate the anticancer activity of paclitaxel-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (PNPs) based on their shapes and surface modifications in breast cancer cells. We hypothesized that anisotropic-PNPs (AT-PNPs) with PEGylated chitosan (CP) surface modifications and high aspect ratios exhibit higher anticancer activity than PNPs and AT-PNPs with CP surface modifications and low aspect ratios. Six types of PNPs and AT-PNPs with different shapes and surface modifications were successfully prepared. The cellular uptake and cytotoxicity of the AT-PNPs were higher than those of the PNPs, while the cellular uptake and cytotoxicity of the PNPs and AT-PNPs with CP were higher than those of the uncoated PNPs and AT-PNPs. Moreover, all the particles remained stable for 4 months. In conclusion, this study primarily described the preparation of CP-AT-PNPs, and the CP-AT-PNPs2 developed herein are expected to demonstrate promising anticancer effects in animal experiments and clinical studies.

Manufacturing of Dexamethasone-Poly(d,l-Lactide-co-Glycolide) Implants Using Hot-Melt Extrusion: Within- and Between-Batch Product Performance Comparisons.

Purpose: Reliable drug therapy with injectable intravitreal implants requires implants of consistent quality. The purpose of this study was to prepare dexamethasone-poly(d,l-lactide-co-glycolide) (PLGA) biodegradable implants and assess implant quality within and between batches for different polymer compositions. Methods: Implants containing 20% w/w dexamethasone with 3 theoretical rates of release (fast, intermediate, and slow) were manufactured with decreasing proportion of acid-terminated PLGA (50:50) and increasing proportion of ester-terminated PLGA (50:50) in a batch process using hot-melt extrusion. The implants were manufactured without and with in-process modification of extrusion/conveyor speed in the late phase of each batch. Implant samples collected at early, middle, and late phases of each batch were analyzed for diameter, drug loading, mechanical properties (strength and toughness), and drug release. Results: With a fixed process, unlike a modified process with an increase in extrusion speed and reduction of conveyor speed in the late phase, all implant formulations tended to decrease in diameter and mechanical properties in the late phase. Drug release profiles for the intermediate and slow release compositions were similar with or without process modification, unlike the fast release composition. Addition of ester-terminated PLGA resulted in a slower drug release. When all formulations are grouped together, the implant diameter exhibited a moderate correlation with mechanical properties, but no correlation was observed with drug release. Conclusions: Within a hot-melt extrusion batch process, the dexamethasone-PLGA implant diameter and hence toughness and strength tend to decline in the latter phase. In-process adjustment of extrusion and conveyor speeds can improve batch consistency and, potentially, implant integrity or performance during or after injection. Process changes did not affect drug release for 2 of the 3 implant compositions.

Lipid-PLGA hybrid nanoparticles of paclitaxel: Preparation, characterization, in vitro and in vivo evaluation.

Paclitaxel loaded lipid-polymer nanoparticles (NPs) were successfully synthesized using poly lactide-co-glycolide (PLGA) as polymer and stearyl amine, soya lecithin as lipids via single step nanoprecipitation method. The study was aimed to combine the advantage of structural integrity of hybrid NPs containing PLGA core and lipid in the shell. Surfactants such as polyvinyl alcohol (PVA), tocopheryl polyethylene glycol succinate (TPGS), pluronic 68 (F68) and human serum albumin (HSA) were used as stabilizers. NPs were characterized w.r.t. morphology, particle size, zeta potential, encapsulation efficiency, in vitro drug release, protein binding capability and blood compatibility. NPs were in size range of 150-400 nm and the particle size was greatly influenced by type and concentration of surfactants and lipids. TEM analysis confirmed the spherical shape and coating of the lipid on the NPs surface. Highest percentage entrapment efficiency was observed in NPs prepared with HSA as surfactant. The release rate of paclitaxel from modified NPs was much slower as compared to unmodified NPs. The percent protein binding of P-PVA, P-TPGS, P-F68 and P-HSA (unmodified NPs) was found to be 15.11%, 16.27%, 27.90% and 33.72%, respectively demonstrating effect of surface properties of NPs on protein binding. The hemolytic activity of the NPs was found to be dependent on type of surfactant and not on the lipid employed. PVA, TPGS, F68, HSA surfactants showed ~16%, ~10%, ~13%, ~7% hemolysis rate, respectively. The surface nature of NPs had a significant effect on the circulation profile of formulations. The HSA based NPs showed prolonged blood circulation time when compared to NPs without lipid coating. Thus, the synthesized dual lipid coated PLGA NPs with HSA could act as a potential nano-system for controlled delivery of paclitaxel.

PLGA microsphere-based composite hydrogel for dual delivery of ciprofloxacin and ginsenoside Rh2 to treat Staphylococcus aureus-induced skin infections.

When antibiotic-resistant pathogenic bacteria pose a high threat to human health, bacterial multidrug efflux pumps become major contributors to the high-level antibiotic resistance in most microorganisms. Since traditional antibiotics are still indispensable currently, we report a dual drug delivery system to maximize the antibacterial efficacy of antibiotics by inhibiting efflux pumps in bacteria before their exposure to antibiotics. In this research, a microsphere/hydrogel composite was constructed from ciprofloxacin (Cip)-loaded poly (lactic-co-glycolic acid) (PLGA) microspheres and ginsenoside Rh2 (G-Rh2) dispersed thermo-sensitive hydrogel to treat skin infections. In vitro drug release studies indicated that while G-Rh2 in hydrogel presented a faster and short-term release manner to rapidly inhibit the NorA efflux pumps, Cip showed a sustained and long-term release behavior to provide a local high concentration gradient for facilitating drug percutaneous penetration. The combination of Cip and G-Rh2 demonstrated a high degree of synergism against both methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA), hence significantly improving their in vitro antibacterial activity and efficiency. Moreover, the antibacterial performance of the microsphere/hydrogel composite with a sequential release profile is superior to that of other formulations in mouse model of MRSA skin infections, indicating its great potential to treat antibiotic-resistant skin infections.

Enhancement radiation-induced apoptosis in C6 glioma tumor-bearing rats via pH-responsive magnetic graphene oxide nanocarrier.

5-iodo-2-deoxyuridine (IUdR) has been demonstrated to induce an appreciable radiosensitizing effect on glioblastoma patients, but due to the short circulation half-life times and failure to pass through the blood-brain barrier (BBB), its clinical use is limited. Accordingly, in this study, we used magnetic graphene oxide (NGO/SPIONs) nanoparticles coated with PLGA polymer as a dynamic nanocarrier for IUdR and, evaluated its sensitizing enhancement ratio in combination with a single dose X-ray at clinically megavoltage energies for treatment of C6 glioma rats. Nanoparticles were characterized using Zetasizer and TEM microscopy, and in vitro biocompatibility of nanoparticles was assessed with MTT assay. IUdR/MNPs were intravenously administered under a magnetic field (1.3 T) on day 13 after the implantation of C6 cells. After a day following the injection, rats exposed with radiation (8 Gy). ICP-OES analysis data indicated an effective magnetic targeting, leading to remarkably improved penetration through the BBB. In vivo release analysis with HPLC indicated sustained release of IUdR and, prolonged the lifespan in plasma (P < .01). In addition, our findings revealed a synergistic effect for IUdR/MNPs coupled with radiation, which significantly inhibited the tumor expansion (>100%), prolonged the survival time (>100%) and suppressed the anti-apoptotic response of glioma rats by increasing Bax/Bcl-2 ratio (2.13-fold) in compared with the radiation-only. In conclusion, besides high accumulation in targeted tumor sites, the newly developed IUdR/MNPs, also exhibited the ability of IUdR/MNPs to significantly enhance radiosensitizing effect, improve therapeutic efficacy and increase toxicity for glioma-bearing rats.

A Novel Transdermal Protein Delivery Strategy via Electrohydrodynamic Coating of PLGA Microparticles onto Microneedles.

Transdermal delivery of biological therapeutics is emerging as a potent alternative to intravenous or subcutaneous injections. The latter possess major challenges including patient discomfort, the necessity for trained personnel, specialized sharps disposal, and risk of infection. The microneedle (MN) technology circumvents many of the abovementioned challenges, delivering biological materials directly into the skin and allowing sustained release of the active ingredient both in animal models and in humans. This study describes the use of electrohydrodynamic atomization (EHDA) to coat ovalbumin (OVA)-loaded PLGA nanoparticles onto hydrogel-forming MN arrays. The particles showed extended release of OVA over ca. 28 days. Microscopic analysis demonstrated that EHDA could generate a uniform particle coating on the MNs, with 30% coating efficiency. Furthermore, the coated MN array manifested similar mechanical characteristics and insertion properties to the uncoated system, suggesting that the coating should have no detrimental effects on the application of the MNs. The coated MNs resulted in no significant increase in anti-OVA-specific IgG titres in C57BL/6 mice in vivo as compared to the untreated mice (paired t-test, p > 0.05), indicating that the formulations are nonimmunogenic. The approach of using EHDA to coat an MN array thus appears to have potential as a novel noninvasive protein delivery strategy.